Search

Plastics and plasticizers accumulate in the ecological niches affecting biodiversity, and human and environmental health. Bacteria degrading polyethylene terephthalate (PET) were screened and PETases involved in PET degradation were characterized. Here, we identified a carboxylesterase Dkca1 of 48.44 kDa molecular mass from Dietzia kunjamensis IITR165 shown to degrade amorphous PET film into bis(2-hydroxyethyl) terephthalate (BHET) and terephthalic acid (TPA) formed 64.35 μM and 35.26 μM, respectively within 96 h at 37 °C as revealed by LC-MS analysis showed significant PET hydrolase activity similar to reported PETases. SEM analysis confirms the surface erosion as cavities and holes. Dkca1 also hydrolysed BHET and dibutyl phthalate (DBP) at a concentration of 1 mM within 3 h indicating its versatility. Fluorescence quenching shows Dkca1 protein has a maximum affinity (K d ) towards BHET (86.55 μM) than DBP (134.2 μM). The protein demonstrated high stability under temperatures above 40 °C and at the pH range of 6.0-9.0. Moreover, Amino acid composition showed that the Dkca1 enzyme belongs to family VII carboxylesterase containing conserved catalytic triad of Ser183-Glu289-His378 with pentapeptide motif GXSAG and an oxyanion hole H103GGG106, sharing 37.47 % and 32.44 % similarity with a PET hydrolase TfCa from Thermobifida fusca and PAE hydrolase CarEW from Bacillus sp. K91, respectively. A docking study revealed that ligand PET, BHET, and DBP showed favourable binding in the catalytic pocket of the Dkca1 protein., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Sialic acid esterase (SIAE) catalyzes the removal of O-acetyl groups from sialic acids found on cell surface glycoproteins to regulate cellular processes such as B cell receptor signalling and apoptosis. Loss-of-function mutations in SIAE are associated with several common autoimmune diseases including Crohn's, ulcerative colitis, and arthritis. To gain a better understanding of the function and regulation of this protein, we determined crystal structures of SIAE from three mammalian homologs, including an acetate bound structure. The structures reveal that the catalytic domain adopts the fold of the SGNH hydrolase superfamily. The active site is composed of a catalytic dyad, as opposed to the previously reported catalytic triad. Attempts to determine a substrate-bound structure yielded only the hydrolyzed product acetate in the active site. Rigid docking of complete substrates followed by molecular dynamics simulations revealed that the active site does not form specific interactions with substrates, rather it appears to be broadly specific to accept sialoglycans with diverse modifications. Based on the acetate bound structure, a catalytic mechanism is proposed. Structural mapping of disease mutations reveals that most are located on the surface of the enzyme and would only cause minor disruptions to the protein fold, suggesting that these mutations likely affect binding to other factors. These results improve our understanding of SIAE biology and may aid in the development of therapies for autoimmune diseases and cancer., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

We previously revealed the structural basis of Ca 2+ dependent regulation of a polyethylene terephthalate (PET)-degrading enzyme, Cut190, and proposed a unique reaction cycle in which the enzyme repeatedly binds and releases Ca 2+ . Here, we report crystal structures of Cut190 mutants with high thermal stability complexed with PET-like ligands that contain aromatic rings. The structural information has allowed us to perform further computational analyses using a PET-trimer bound model. Our multicanonical molecular dynamics simulations and subsequent analyses of the free energy landscapes revealed a novel intermediate form that occurs during the enzymatic reaction cycle. Furthermore, the computational analyses were used to investigate the effect of the point mutations F77L and F81L in the Ca 2+ -binding site, which showed that the former stabilizes the engaged and open forms to improve transition between the open and active forms, while the latter extremely increases the open form. Subsequent experiments showed that the F77L mutation increased the activity, while the F81L mutation decreased the activity. Our computational analysis has enabled us to explore the dynamics of Cut190 on a completely new level, providing key insights into how the balance between the various conformations influences the reaction cycle and ultimately how to improve the reaction cycle., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest with the contents of this article., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Recently, the lactonase activity of several enzymes (lactonase AiiA, organophosphate hydrolase (His 6 -OPH) and New Delhi metallo-β-lactamase (NDM-1)) was revealed in the hydrolysis of lactone-containing fungal Quorum Sensing molecules (FQSM). This study was aimed at the investigation of possible use of these enzymes as components of antifungal combinations with antimicrobial peptides (AMPs) to increase their action efficiency against various fungi. For this, the interaction of various AMPs with AiiA, NDM-1 or His 6 -OPH, as well as the effect of AMPs on the catalytic characteristics of these enzymes in the hydrolysis of FQSM in enzyme/AMP combinations, were studied using in silico computer modeling methods. Enzymes combinations with 3 AMPs Bacitracin, Colistin and Polymyxin B were selected as the most rational in terms of maintaining the effectiveness of AMP and the catalytic activity of enzymes. The antifungal action of the selected combinations against cells of mycelial fungi and yeast was studied in vitro. It was found that combinations of the enzymes AiiA, His 6 -OPH and NDM-1 with Bacitracin, Colistin and Polymyxin B provide a significant increase in the action efficiency (up to 5000 times) of both AMPs and enzymes against fungi. The most effective variants were obtained for Polymyxin B in multicomponent combinations with enzymes., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Elena Efremenko reports financial support was provided by Russian Science Foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The proliferation of nano-plastic particles (NPs) poses severe environmental hazards, urgently requiring effective biodegradation methods. Herein, a novel method was developed for degrading nano-PET (polyethylene terephthalate) using immobilized cutinases. Nano-PET particles were prepared using a straightforward method, and biocompatible elastin-like polypeptide-magnetic nanoparticles (ELPs-MNPs) were obtained as magnetic cores via biomimetic mineralization. Using one-pot synthesis with the cost-effective precursor tetraethoxysilane (TEOS), silica-coated magnetically immobilized ELPs-tagged cutinase (ET-C@SiO 2 @MNPs) were produced. ET-C@SiO 2 @MNPs showed rapid magnetic separation within 30 s, simplifying recovery and reuse. ET-C@SiO 2 @MNPs retained 86 % of their initial activity after 11 cycles and exhibited superior hydrolytic capabilities for nano-PET, producing 0.515 mM TPA after 2 h of hydrolysis, which was 96.6 % that of free enzymes. Leveraging ELPs biomimetic mineralization, this approach offers a sustainable and eco-friendly solution for PET-nanoplastic degradation, highlighting the potential of ET-C@SiO 2 @MNPs in effective nanoplastic waste management and contributing to environmental protection and sustainable development., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Qurom quenching enzyme have an impact on treatment efficacy and prevent the recurrence of Helicobacter pylori biofilm-related infections, although it has not been thoroughly investigated in vitro and in silico. The current study aims to characterize the N-acyl homoserine lactonase, the quorum quenching AiiA protein of Bacillus licheniformis against H. pylori biofilm., Methods and Results: In this study, AiiA protein were screened for their anti-biofilm activity, was found to effectively control biofilm formation of H. pylori with concentrations ranging from 2 to 10 µg/mL. According to CLSM and COMSTAT analysis, the untreated substratum had the robust biofilm biomass of 25-18 µM and biovolume of 3-4 mm 3 /mm 2 . The total biofilm biovolume and average biofilm thickness were considerably reduced by 40% with a single application of 10 µg/mL of AiiA protein. The biofilm treated with AiiA exhibited a lower urease and polysaccharides than to the untreated biofilm. Further, in silico analysis, exhibited a greater interaction of AiiA against the outer membrane proteins of H. pylori compared to virulence factors. The conserved domains in the binding pockets of AiiA proteins showed a highest binding affinity proving the catalytic activity of the protein., Conclusion: In this study, the H. pylori biofilm architecture, exopolysaccharide and urease were significantly controlled by our purified N-acyl homoserine lactonase from B. licheniformis. Furthermore, the molecular docking showed the significant interaction between AiiA and key biofilm forming and virulence proteins proved an excellent antibiofilm activity controlling the infections of H. pylori human pathogen., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Understanding how the human gut microbiota contribute to the metabolism of dietary carbohydrates is of great interest, particularly those with ferulic acid (FA) decorations that have manifold health benefits. Here, we report the crystal structure of a decameric feruloyl esterase ( Bt Fae) from Bacteroides thetaiotaomicron in complex with methyl ferulate (MFA), revealing that MFA is situated in a noncatalytic substrate binding pocket adjacent to the catalytic pocket. Molecular docking and mutagenesis studies further demonstrated that the adjacent pocket affects substrate binding in the active site and negatively regulates the Bt Fae activity on both synthetic and natural xylan substrates. Additionally, quantum mechanics (QM) calculations were employed to investigate the catalytic process of Bt Fae from substrate binding to product release, and identified TS_2 in the acylation step is rate-limiting. Collectively, this study unmasks a novel regulatory mechanism of FAE activity, which may contribute to further investigation of FA-conjugated polysaccharides metabolism in the human gut.

Tannase-producing filamentous fungi residing alongside tannin-rich ambient in the Northwest Himalayas were isolated at laboratory conditions and further identified by 18S ribosomal RNA gene sequencing. Five most potent tannase producing strains (EI ≥ 2.0), designated Aspergillus fumigatus AN1, Fusarium redolens AN2, Penicillium crustosum AN3, Penicillium restrictum AN4, and Penicillium commune AN5, were characterized. The strain Penicillium crustosum AN3 exhibited a maximum zone dia (25.66 mm ± 0.38). During solid-state fermentation, a maximal amount of tannase was attained with Penicillium crustosum AN3 using pine needles (substrate) by adopting response surface methodology for culture parameter optimization. Gel filtration chromatography yielded 46.48% of the partially purified enzyme with 3.94-fold of tannase purification. We found two subunits in enzyme-117.76 KDa and 88.51 KDa, respectively, in the SDS-PAGE. Furthermore, the characterization of partially purified tannase revealed a maximum enzyme activity of 8.36 U/mL at 30 °C using a substrate concentration (methyl gallate) of 10 mM. To broaden the knowledge of crude enzyme application, dye degradation studies were subjected to extracellular crude tannase from Penicillium crustosum AN3 where the maximum degradation achieved at a low enzyme concentration (5 ppm)., (© 2024. Institute of Microbiology, Academy of Sciences of the Czech Republic, v.v.i.)

Paraben hydrolase and tannase catalyze the hydrolysis of parabens (4-hydroxybenzoic acid esters) and gallic acid (3,4,5-trihydroxybenzoic acid) esters, respectively. Paraben hydrolase (AoPrbA) and tannase (AoTanB) from Aspergillus oryzae belong to the tannase family in the ESTHER database. However, the substrate specificities of AoPrbA and AoTanB are narrow. Based on structural information of Aspergillus niger tannase (PDB code 7k4o), we constructed five single variants of AoPrbA (Thr200Glu, Phe231Gln, Leu232Gln, Ile361Tyr, and Leu428Ser) and four of AoTanB (Glu203Asp, Glu203Thr, His237Ala, and Ser440Leu) to investigate substrate discrimination between AoPrbA and AoTanB. Each variant was expressed in Pichia pastoris and were purified from the culture supernatant. Five purified variants of AoPrbA and four variants of AoTanB showed reduced paraben hydrolase and tannase activities compared with AoPrbA and AoTanB wild types, respectively. Interestingly, the AoPrbA wild type did not hydrolyze gallic acid methyl ester, whereas the Thr200Glu, Leu232Gln, and Leu428Ser variants did, indicating that these three variants acquired tannase activity. In particular, the Leu428Ser variant exhibited considerably greater hydrolysis of gallic acid and protocatechuic acid methyl esters. Meanwhile, the AoTanB wild type, and Glu203Asp, His237Ala and Ser440Leu variants hydrolyzed the protocatechuate methyl and 4-hydroxybenzoate ethyl esters; however, the Glu203Thr variant did not hydrolyze above-mentioned substrates. Additionally, the ratio of paraben hydrolase activity to tannase activity in Ser440Leu was markedly elevated., Competing Interests: Declaration of Competing Interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Dienelactone hydrolase (DLH) is one of numerous hydrolytic enzymes with an α/β-hydrolase fold, which catalyze the hydrolysis of dienelactone to maleylacetate. The DLHs share remarkably similar tertiary structures and a conserved arrangement of catalytic residues. This study presents the crystal structure and comprehensive functional characterization of a novel thermostable DLH from the bacterium Hydrogenobacter thermophilus (HtDLH). The crystal structure of the HtDLH, solved at a resolution of about 1.67 Å, exhibits a canonical α/β-hydrolase fold formed by eight β-sheet strands in the core, with one buried α-helix and six others exposed to the solvent. The structure also confirmed the conserved catalytic triad of DHLs formed by Cys121, Asp170, and His202 residues. The HtDLH forms stable homodimers in solution. Functional studies showed that HtDLH has the expected esterase activity over esters with short carbon chains, such as p-nitrophenyl acetate, reaching optimal activity at pH 7.5 and 70 °C. Furthermore, HtDLH maintains more than 50 % of its activity even after incubation at 90 °C for 16 h. Interestingly, HtDLH exhibits catalytic activity towards polyethylene terephthalate (PET) monomers, including bis-1,2-hydroxyethyl terephthalate (BHET) and 1-(2-hydroxyethyl) 4-methyl terephthalate, as well as other aliphatic and aromatic esters. These findings associated with the lack of activity on amorphous PET indicate that HtDLH has characteristic of a BHET-degrading enzyme. This work expands our understanding of enzyme families involved in PET degradation, providing novel insights for plastic biorecycling through protein engineering, which could lead to eco-friendly solutions to reduce the accumulation of plastic in landfills and natural environments., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Herein, a novel multifunctional enzyme β-glucosidase/xylanase/feruloyl esterase (GXF) was constructed by fusion of β-glucosidase and bifunctional xylanase/feruloyl esterase. The activities of β-glucosidase, xylanase, feruloyl esterase and acetyl xylan esterase displayed by GXF were 67.18 %, 49.54 %, 38.92 % and 23.54 %, respectively, higher than that of the corresponding single functional enzymes. Moreover, the GXF performed better in enhancing aroma and quality of Longjing tea than the single functional enzymes and their mixtures. After treatment with GXF, the grassy and floral odors of tea infusion were significantly improved. Moreover, GXF treatment could improve concentrations of flavonoid aglycones of myricetin, kaempferol and quercetin by 68.1-, 81.42- and 77.39-fold, respectively. In addition, GXF could accelerate the release of reducing sugars, ferulic acid and xylo-oligosaccharides by 9.48-, 8.25- and 4.11-fold, respectively. This multifunctional enzyme may have potential applications in other fields such as food production and biomass degradation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In the realm of disease vectors and agricultural pest management, insecticides play a crucial role in preserving global health and ensuring food security. The pervasive use, particularly of organophosphates (OPs), has given rise to a substantial challenge in the form of insecticide resistance. Carboxylesterases emerge as key contributors to OP resistance, owing to their ability to sequester or hydrolyze these chemicals. Consequently, carboxylesterase enzymes become attractive targets for the development of novel insecticides. Inhibiting these enzymes holds the potential to restore the efficacy of OPs against which resistance has developed. This study aimed to screen the FooDB library to identify potent inhibitory compounds targeting carboxylesterase, Ha006a from the agricultural pest Helicoverpa armigera. The ultimate objective is to develop effective interventions for pest control. The compounds with the highest scores underwent evaluation through docking studies and pharmacophore analysis. Among them, four phytochemicals-donepezil, protopine, 3',4',5,7-tetramethoxyflavone, and piperine-demonstrated favorable binding affinity. The Ha006a-ligand complexes were subsequently validated through molecular dynamics simulations. Biochemical analysis, encompassing determination of IC 50 values, complemented by analysis of thermostability through Differential Scanning Calorimetry and interaction kinetics through Isothermal Titration Calorimetry was conducted. This study comprehensively characterizes Ha006a-ligand complexes through bioinformatics, biochemical, and biophysical methods. This investigation highlights 3',4',5,7-tetramethoxyflavone as the most effective inhibitor, suggesting its potential for synergistic testing with OPs. Consequently, these inhibitors offer a promising solution to OP resistance and address environmental concerns associated with excessive insecticide usage, enabling a significant reduction in their overuse., (© 2024. The Author(s).)

Phthalate esters (PAEs) are emerging hazardous and toxic chemicals that are extensively used as plasticizers or additives. Diethyl phthalate (DEP) and dimethyl phthalate (DMP), two kinds of PAEs, have been listed as the priority pollutants by many countries. PAE hydrolases are the most effective enzymes in PAE degradation, among which family IV esterases are predominate. However, only a few PAE hydrolases have been characterized, and as far as we know, no crystal structure of any PAE hydrolases of the family IV esterases is available to date. HylD1 is a PAE hydrolase of the family IV esterases, which can degrade DMP and DEP. Here, the recombinant HylD1 was characterized. HylD1 maintained a dimer in solution, and functioned under a relatively wide pH range. The crystal structures of HylD1 and its complex with monoethyl phthalate were solved. Residues involved in substrate binding were identified. The catalytic mechanism of HylD1 mediated by the catalytic triad Ser140-Asp231-His261 was further proposed. The hylD1 gene is widely distributed in different environments, suggesting its important role in PAEs degradation. This study provides a better understanding of PAEs hydrolysis, and lays out favorable bases for the rational design of highly-efficient PAEs degradation enzymes for industrial applications in future., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal, relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The overwhelming use of PET plastic in various day-to-day activities led to the voluminous increase in PET waste and growing environmental hazards. A plethora of methods have been used that are associated with secondary pollutants. Therefore, microbial degradation of PET provides a sustainable approach due to its versatile metabolic diversity and capacity. The present work highlights the cutinase enzyme's role in PET degradation. This study focuses on the bacterial cutinases homologs screened from 43 reported phylum of bacteria. The reported bacterial cutinases for plastic degradation have been chosen as reference sequences, and 917 sequences have shown homology across the bacterial phyla. The dienelactone hydrolase (DLH) domain was identified for attaining specificity towards PET binding in 196 of 917 sequences. Various computational tools have been used for the physicochemical characterization of 196 sequences. The analysis revealed that most selected sequences are hydrophilic, extracellular, and thermally stable. Based on this analysis, 17 sequences have been further pursued for three-dimensional structure prediction and validation. The molecular docking studies of 17 selected sequences revealed efficient PET binding with the three sequences derived from the phylum Bacteroidota, the lowest binding energy of -5.9 kcal/mol, Armatimonadota, and Nitrososphaerota with -5.8 kcal/mol. The two enzyme sequences retrieved from the phylum Bacteroidota and Armatimonadota are metagenomically derived. Therefore, the present studies concluded that there is a high probability of finding cutinase homologs in various environmental resources that can be further explored for PET degradation., (© 2024. The Author(s) under exclusive licence to Sociedade Brasileira de Microbiologia.)

The rapid increase in global plastic consumption, especially the worldwide use of polyethylene terephthalate (PET), has caused serious pollution problems. Due to the low recycling rate of PET, a substantial amount of waste accumulates in the environment, which prompts a growing focus on enzymatic degradation for its efficiency and environmentally friendliness. This study systematically designed and modified a cutinase, Est1 from Thermobifida alba AHK119, known for its potential of plastic-degradation at high temperatures. Additionally, the introduction of clustering algorithms provided the ability to understand and modify biomolecules, to accelerate the process of finding the optimal mutations. K-means was further proceeded based on the positive mutations. After comprehensive screening for thermostability and activity mutation sites, the dominant mutation Est1_5M (Est1 with the mutations of N213M, T215P, S115P, Q93A, and L91W) exhibited satisfying degradation ability for commercial PET bottles. The results showed that Est1_5M achieved a degradation rate of 90.84% in 72 h, 65-fold higher than the wild type. This study offers reliable theoretical and practical support for the development of efficient PET-degrading enzymes, providing a reference for plastic pollution management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Enzymatic depolymerization of PET waste emerges as a crucial and sustainable solution for combating environmental pollution. Over the past decade, PET hydrolytic enzymes, such as PETase from Ideonella sakaiensis (IsPETases), leaf compost cutinases (LCC), and lipases, have been subjected to rational mutation to enhance their enzymatic properties. ICCM, one of the best LCC mutants, was selected for overexpression in Escherichia coli BL21(DE3) for in vitro PET degradation. However, overexpressing ICCM presents challenges due to its low productivity. A new stress-inducible T7RNA polymerase-regulating E. coli strain, ASIA hsp , which significantly enhances ICCM production by 72.8 % and achieves higher enzyme solubility than other strains. The optimal cultural condition at 30 °C with high agitation, corresponding to high dissolved oxygen levels, has brought the maximum productivity of ICCM and high PET-hydrolytic activity. The most effective PET biodegradation using crude or pure ICCM occurred at pH 10 and 60 °C. Moreover, ICCM exhibited remarkable thermostability, retaining 60 % activity after a 5-day reaction at 60 °C. Notably, crude ICCM eliminates the need for purification and efficiently degrades PET films., Competing Interests: Declaration of Competing Interest The authors declare that they have no competing interests., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Tannins are critical plant defense metabolites, enriched in bark and leaves, that protect against microorganisms and insects by binding to and precipitating proteins. Hydrolyzable tannins contain ester bonds which can be cleaved by tannases-serine hydrolases containing so-called "cap" domains covering their active sites. However, comprehensive insights into the biochemical properties and structural diversity of tannases are limited, especially regarding their cap domains. We here present a code pipeline for structure prediction-based hierarchical clustering to categorize the whole family of bacterial tannases, and have used it to discover new types of cap domains and other structural insertions among these enzymes. Subsequently, we used two recently identified tannases from the gut/soil bacterium Clostridium butyricum as model systems to explore the biochemical and structural properties of the cap domains of tannases. We demonstrate using molecular dynamics and mutagenesis that the cap domain covering the active site plays a major role in enzyme substrate preference, inhibition, and activity-despite not directly interacting with smaller substrates. The present work provides deeper knowledge into the mechanism, structural dynamics, and diversity of tannases. The structure-based clustering approach presents a new way of classifying any other enzyme family, and will be of relevance for enzyme types where activity is influenced by variable loop or insert regions appended to a core protein fold., (© 2024 The Author(s). Protein Science published by Wiley Periodicals LLC on behalf of The Protein Society.)

Phenylpropanoid sucrose esters are a large and important group of natural substances with significant therapeutic potential. This work describes a pilot study of the enzymatic hydroxycinnamoylation of sucrose and its derivatives which was carried out with the aim of obtaining precursors of natural phenylpropanoid sucrose esters, e.g., vanicoside B. In addition to sucrose, some chemically prepared sucrose acetonides and substituted 3'- O -cinnamates were subjected to enzymatic transesterification with vinyl esters of coumaric, ferulic and 3,4,5-trimethoxycinnamic acid. Commercial enzyme preparations of Lipozyme TL IM lipase and Pentopan 500 BG exhibiting feruloyl esterase activity were tested as biocatalysts in these reactions. The substrate specificity of the used biocatalysts for the donor and acceptor as well as the regioselectivity of the reactions were evaluated and discussed. Surprisingly, Lipozyme TL IM catalyzed the cinnamoylation of sucrose derivatives more to the 1'-OH and 4'-OH positions than to the 6'-OH when the 3'-OH was free and the 6-OH was blocked by isopropylidene. In this case, Pentopan reacted comparably to 1'-OH and 6'-OH positions. If sucrose 3'- O -coumarate was used as an acceptor, in the case of feruloylation with Lipozyme in CH 3 CN, 6- O -ferulate was the main product (63%). Pentopan feruloylated sucrose 3'- O -coumarate comparably well at the 6-OH and 6'-OH positions (77%). When a proton-donor solvent was used, migration of the 3'- O -cinnamoyl group from fructose to the 2-OH position of glucose was observed. The enzyme hydroxycinnamoylations studied can shorten the targeted syntheses of various phenylpropanoid sucrose esters.

Bacteriophages (phages) are viruses that infect bacteria. Many of them produce specific enzymes called depolymerases to break down external polysaccharide structures. Accurate annotation and domain identification of these depolymerases are challenging due to their inherent sequence diversity. Hence, we present DepoScope, a machine learning tool that combines a fine-tuned ESM-2 model with a convolutional neural network to identify depolymerase sequences and their enzymatic domains precisely. To accomplish this, we curated a dataset from the INPHARED phage genome database, created a polysaccharide-degrading domain database, and applied sequential filters to construct a high-quality dataset, which is subsequently used to train DepoScope. Our work is the first approach that combines sequence-level predictions with amino-acid-level predictions for accurate depolymerase detection and functional domain identification. In that way, we believe that DepoScope can greatly enhance our understanding of phage-host interactions at the level of depolymerases., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Concha-Eloko et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Phytohormone levels are regulated through specialized enzymes, participating not only in their biosynthesis but also in post-signaling processes for signal inactivation and cue depletion. Arabidopsis thaliana (At) carboxylesterase 15 (CXE15) and carboxylesterase 20 (CXE20) have been shown to deplete strigolactones (SLs) that coordinate various growth and developmental processes and function as signaling molecules in the rhizosphere. Here, we elucidate the X-ray crystal structures of AtCXE15 (both apo and SL intermediate bound) and AtCXE20, revealing insights into the mechanisms of SL binding and catabolism. The N-terminal regions of CXE15 and CXE20 exhibit distinct secondary structures, with CXE15 characterized by an alpha helix and CXE20 by an alpha/beta fold. These structural differences play pivotal roles in regulating variable SL hydrolysis rates. Our findings, both in vitro and in planta, indicate that a transition of the N-terminal helix domain of CXE15 between open and closed forms facilitates robust SL hydrolysis. The results not only illuminate the distinctive process of phytohormone breakdown but also uncover a molecular architecture and mode of plasticity within a specific class of carboxylesterases., (© 2024. The Author(s).)

In bacteria, peptidyl-tRNA hydrolase (Pth, E.C. 3.1.1.29) is a ubiquitous and essential enzyme for preventing the accumulation of peptidyl-tRNA and sequestration of tRNA. Pth is an esterase that cleaves the ester bond between peptide and tRNA. Here, we present the crystal structure of Pth from Enterococcus faecium (EfPth) at a resolution of 1.92 Å. The two molecules in the asymmetric unit differ in the orientation of sidechain of N66, a conserved residue of the catalytic site. Enzymatic hydrolysis of substrate α-N-BODIPY-lysyl-tRNA Lys (BLT) by EfPth was characterized by Michaelis-Menten parameters K M 163.5 nM and Vmax 1.9 nM/s. Compounds having pyrrolinone scaffold were tested for inhibition of Pth and one compound, 1040-C, was found to have IC 50 of 180 nM. Antimicrobial activity profiling was done for 1040-C. It exhibited equipotent activity against drug-susceptible and resistant S. aureus (MRSA and VRSA) and Enterococcus (VSE and VRE) with MICs 2-8 μg/mL. 1040-C synergized with gentamicin and the combination was effective against the gentamicin resistant S. aureus strain NRS-119. 1040-C was found to reduce biofilm mass of S. aureus to an extent similar to Vancomycin. In a murine model of infection, 1040-C was able to reduce bacterial load to an extent comparable to Vancomycin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Homocysteine thiolactone (HTL), a toxic metabolite of homocysteine (Hcy) in hyperhomocysteinemia (HHcy), is known to modify protein structure and function, leading to protein damage through formation of N-Hcy-protein. HTL has been highly linked to HHcy-associated cardiovascular and neurodegenerative diseases. The protective role of HTL hydrolases against HTL-associated vascular toxicity and neurotoxicity have been reported. Although several endogeneous enzymes capable of hydrolyzing HTL have been identified, the primary enzyme responsible for its metabolism remains unclear. In this study, three human carboxylesterases were screened to explore new HTL hydrolase and human carboxylesterase 1 (hCES1) demonstrates the highest catalytic activity against HTL. Given the abundance of hCES1 in the liver and the clinical significance of its single-nucleotide polymorphisms (SNPs), six common hCES1 nonsynonymous coding SNP (nsSNPs) variants were examined and characterized for their kinetic parameters. Variants E220G and G143E displayed 7.3-fold and 13.2-fold lower catalytic activities than its wild-type counterpart. In addition, the detailed catalytic mechanism of hCES1 for HTL hydrolysis was computational investigated and elucidated by Quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) method. The function of residues E220 and G143 in sustaining its hydrolytic activity of hCES1 was analyzed, and the calculated energy difference aligns well with experimental-derived results, supporting the validity of our computational insights. These findings provide insights into the potential protective role of hCES1 against HTL-associated toxicity, and warrant future studies on the possible association between specific genetic variants of hCES1 with impaired catalytic function and clinical susceptibility of HTL-associated cardiovascular and neurodegenerative diseases., (© 2024 The Protein Society.)

Environmental pollution caused by plastic waste has become global problem that needs to be considered urgently. In the pursuit of a circular plastic economy, biodegradation provides an attractive strategy for managing plastic wastes, whereas effective plastic-degrading microbes and enzymes are required. In this study, we report that Blastobotrys sp. G-9 isolated from discarded plastic in landfills is capable of depolymerizing polyurethanes (PU) and poly (butylene adipate-co-terephthalate) (PBAT). Strain G-9 degrades up to 60% of PU foam after 21 days of incubation at 28 ℃ by breaking down carbonyl groups via secretory hydrolase as confirmed by structural characterization of plastics and degradation products identification. Within the supernatant of strain G-9, we identify a novel cutinase BaCut1, belonging to the esterase family, that can reproduce the same effect. BaCut1 demonstrates efficient degradation toward commercial polyester plastics PU foam (0.5 mg enzyme/25 mg plastic) and agricultural film PBAT (0.5 mg enzyme/10 mg plastic) with 50% and 18% weight loss at 37 ℃ for 48 h, respectively. BaCut1 hydrolyzes PU into adipic acid as a major end-product with 42.9% recovery via ester bond cleavage, and visible biodegradation is also identified from PBAT, which is a beneficial feature for future recycling economy. Molecular docking, along with products distribution, elucidates a special substrate-binding modes of BaCut1 with plastic substrate analogue. BaCut1-mediated polyester plastic degradation offers an alternative approach for managing PU plastic wastes through possible bio-recycling., Competing Interests: Declaration of Competing Interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Small-scale bioreactors that are affordable and accessible would be of major benefit to the research community. In previous work, an open-source, automated bioreactor system was designed to operate up to the 30 mL scale with online optical monitoring, stirring, and temperature control, and this system, dubbed Chi.Bio, is now commercially available at a cost that is typically 1-2 orders of magnitude less than commercial bioreactors. In this work, we further expand the capabilities of the Chi.Bio system by enabling continuous pH monitoring and control through hardware and software modifications. For hardware modifications, we sourced low-cost, commercial pH circuits and made straightforward modifications to the Chi.Bio head plate to enable continuous pH monitoring. For software integration, we introduced closed-loop feedback control of the pH measured inside the Chi.Bio reactors and integrated a pH-control module into the existing Chi.Bio user interface. We demonstrated the utility of pH control through the small-scale depolymerization of the synthetic polyester, poly(ethylene terephthalate) (PET), using a benchmark cutinase enzyme, and compared this to 250 mL bioreactor hydrolysis reactions. The results in terms of PET conversion and rate, measured both by base addition and product release profiles, are statistically equivalent, with the Chi.Bio system allowing for a 20-fold reduction of purified enzyme required relative to the 250 mL bioreactor setup. Through inexpensive modifications, the ability to conduct pH control in Chi.Bio reactors widens the potential slate of biochemical reactions and biological cultivations for study in this system, and may also be adapted for use in other bioreactor platforms.

Enzyme-mediated polyethylene terephthalate (PET) depolymerization has recently emerged as a sustainable solution for PET recycling. Towards an industrial-scale implementation of this technology, various strategies are being explored to enhance PET depolymerization (PETase) activity and improve enzyme stability, expression, and purification processes. Recently, rational engineering of a known PET hydrolase (LCC-leaf compost cutinase) has resulted in the isolation of a variant harboring four-point mutations (LCC-ICCG), presenting increased PETase activity and thermal stability. Here, we revealed the enzyme's natural extracellular expression and used it to efficiently screen error-prone genetic libraries based on LCC-ICCG for enhanced activity toward consumer-grade PET. Following multiple rounds of mutagenesis and screening, we successfully isolated variants that exhibited up to a 60% increase in PETase activity. Among other mutations, the improved variants showed a histidine to tyrosine substitution at position 218, a residue known to be involved in substrate binding and stabilization. Introducing H218Y mutation on the background of LCC-ICCG (named here LCC-ICCG/H218Y) resulted in a similar level of activity improvement. Analysis of the solved structure of LCC-ICCG/H218Y compared to other known PETases featuring different amino acids at the equivalent position suggests that H218Y substitution promotes enhanced PETase activity. The expression and screening processes developed in this study can be further used to optimize additional enzymatic parameters crucial for efficient enzymatic degradation of consumer-grade PET., (© 2024 The Author(s). Biotechnology Journal published by Wiley‐VCH GmbH.)

To enhance the enzymatic digestibility of polyethylene terephthalate (PET), which is highly oriented and crystallized, a polyethylene glycol (PEG) surfactant of varying molecular weights was utilized to improve the stability of mutant cutinase from Humicola insolens (HiC) and to increase the accessibility of the enzyme to the substrate. Leveraging the optimal conditions for HiC hydrolysis of PET, the introduction of 1 % w/v PEG significantly increased the yield of PET hydrolysis products. PEG600 was particularly effective, increasing the yield by 64.58 % compared to using HiC alone. Moreover, the mechanisms by which PEG600 and PEG6000 enhance enzyme digestion were extensively examined using circular dichroism and fluorescence spectroscopy. The results from CD and fluorescence analyses indicated that PEG alters the protein conformation, thereby affecting the catalytic effect of the enzyme. Moreover, PEG improved the affinity between HiC and PET by lowering the surface tension of the solution, substantially enhancing PET hydrolysis. This study suggests that PEG holds considerable promise as an enzyme protector, significantly aiding in the hydrophilic modification and degradation of PET in an environmentally friendly and sustainable manner., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Isoamyl fatty acid esters (IAFEs) are widely used as fruity flavor compounds in the food industry. In this study, various IAFEs were synthesized from isoamyl alcohol and various fatty acids using a cutinase enzyme (Rcut) derived from Rhodococcus bacteria. Rcut was immobilized on methacrylate divinylbenzene beads and used to synthesize isoamyl acetate, butyrate, hexanoate, octanoate, and decanoate. Among them, Rcut synthesized isoamyl butyrate (IAB) most efficiently. Docking model studies showed that butyric acid was the most suitable substrate in terms of binding energy and distance from the active site serine (Ser114) γ-oxygen. Up to 250 mM of IAB was synthesized by adjusting reaction conditions such as substrate concentration, reaction temperature, and reaction time. When the enzyme reaction was performed by reusing the immobilized enzyme, the enzyme activity was maintained at least six times. These results demonstrate that the immobilized Rcut enzyme can be used in the food industry to synthesize a variety of fruity flavor compounds, including IAB.

Enzymatic recycling of plastic and especially of polyethylene terephthalate (PET) has shown great potential to reduce its negative impact on our society. PET hydrolases (PETases) have been optimized using rational design and machine learning, but the mechanistic details of the PET depolymerization process remain unclear. Belonging to the carboxylic-ester hydrolase family with a canonical Ser-His-Asp catalytic triad, their observed alkaline pH optimum is generally thought to be related to the protonation state of the catalytic His. Here, we explore this aspect in the context of LCC ICCG , an optimized PETase, derived from the leaf-branch compost cutinase enzyme. We use NMR to identify the dominant tautomeric structure of the six histidines. Five show surprisingly low pKa values below 4.0, whereas the catalytic H242 in the active enzyme displays a pKa value that varies from 4.9 to 4.7 when temperatures increase from 30°C to 50°C. Whereas the hydrolytic activity of the enzyme toward a soluble substrate can be modeled by the corresponding protonation/deprotonation curve, an important discrepancy is found when the substrate is the solid plastic. This opens the way to further mechanistic understanding of the PETase activity and underscores the importance of studying the enzyme at the liquid-solid interface., Competing Interests: Declaration of interests S.G., L.P., G.A., A.M., and V.T. are employees of Carbios, and confidentiality agreements prevent them from disclosing any newly submitted declaration of invention. A.M. and V.T. have filed patents WO 2018/011284, WO 2018/011281, and WO 2020/021118 entitled “Novel esterases and uses thereof.”, (Copyright © 2024 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Bacterial peptidyl tRNA hydrolase (Pth) or Pth1 emerges as a pivotal enzyme involved in the maintenance of cellular homeostasis by catalyzing the release of peptidyl moieties from peptidyl-tRNA molecules and the maintenance of a free pool of specific tRNAs. This enzyme is vital for bacterial cells and an emerging drug target for various bacterial infections. Understanding the enzymatic mechanisms and structural intricacies of bacterial Pth is pivotal in designing novel therapeutics to combat antibiotic resistance. This review provides a comprehensive analysis of the multifaceted roles of Pth in bacterial physiology, shedding light on its significance as a potential drug target. This article delves into the diverse functions of Pth, encompassing its involvement in ribosome rescue, the maintenance of a free tRNA pool in bacterial systems, the regulation of translation fidelity, and stress response pathways within bacterial systems. Moreover, it also explores the druggability of bacterial Pth, emphasizing its promise as a target for antibacterial agents and highlighting the challenges associated with developing specific inhibitors against this enzyme. Structural elucidation represents a cornerstone in unraveling the catalytic mechanisms and substrate recognition of Pth. This review encapsulates the current structural insights of Pth garnered through various biophysical techniques, such as X-ray crystallography and NMR spectroscopy, providing a detailed understanding of the enzyme's architecture and conformational dynamics. Additionally, biophysical aspects, including its interaction with ligands, inhibitors, and substrates, are discussed, elucidating the molecular basis of bacterial Pth's function and its potential use in drug design strategies. Through this review article, we aim to put together all the available information on bacterial Pth and emphasize its potential in advancing innovative therapeutic interventions and combating bacterial infections.

Feruloyl esterase has a wide range of applications, but there are still problems with low enzyme yield and activity, and complex purification steps. Our previous research found Lactobacillus amylovorus feruloyl esterase could be secreted extracellular in Escherichia coli. In this study, multiple strategies were implemented to maximize the extracellular production of feruloyl esterase with improved activity in E. coli. Firstly, codon-optimized feruloyl esterase was obtained based on the preference of E. coli, resulting in 41.97 % increase in extracellular secretion. Furthermore, by cascading T7 promoters, replacing the 5' UTR, randomly mutating the N-terminal sequence, and co-expressing secretory cofactors, the extracellular secretion was increased by 36.46 %, 31.25 %, 20.66 % and 25.75 %, respectively. Moreover, the feruloyl esterase were mutated to improve the substrate affinity and activity. The catalytic efficiency of Fae-Q134T and Fae-Q198A increased by 4.62-fold and 5.42-fold. Combining above strategies, extracellular feruloyl esterase activity was increased from 2013.70 U/L to 10,349.04 U/L. These results indicated that the activity and yield of feruloyl esterase secreted by E. coli were significantly increased, which laid a foundation for its industrial application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

One of the four cutinases encoded in the Aspergillus nidulans genome, ANCUT1, is described here. Culture conditions were evaluated, and it was found that this enzyme is produced only when cutin is present in the culture medium, unlike the previously described ANCUT2, with which it shares 62% amino acid identity. The differences between them include the fact that ANCUT1 is a smaller enzyme, with experimental molecular weight and pI values of 22 kDa and 6, respectively. It shows maximum activity at pH 9 and 60 °C under assayed conditions and retains more than 60% of activity after incubation for 1 h at 60 °C in a wide range of pH values (6-10) after incubations of 1 or 3 h. It has a higher activity towards medium-chain esters and can modify long-chain length hydroxylated fatty acids constituting cutin. Its substrate specificity properties allow the lipophilization of alkyl coumarates, valuable antioxidants and its thermoalkaline behavior, which competes favorably with other fungal cutinases, suggests it may be useful in many more applications., (© 2024. The Author(s).)

Understanding the mechanisms influencing poly(ethylene terephthalate) (PET) biodegradation is crucial for developing innovative strategies to accelerate the breakdown of this persistent plastic. In this study, we employed all-atom molecular dynamics simulation to investigate the adsorption process of the LCC-ICCG cutinase enzyme onto the PET surface. Our results revealed that hydrophobic, π-π, and H bond interactions, specifically involving aliphatic, aromatic, and polar uncharged amino acids, were the primary driving forces for the adsorption of the cutinase enzyme onto PET. Additionally, we observed a negligible change in the enzyme's tertiary structure during the interaction with PET (RMSD = 1.35 Å), while its secondary structures remained remarkably stable. Quantitative analysis further demonstrated that there is about a 24% decrease in the number of enzyme-water hydrogen bonds upon adsorption onto the PET surface. The significance of this study lies in unraveling the molecular intricacies of the adsorption process, providing valuable insights into the initial steps of enzymatic PET degradation.

This study reports the tannase purification produced by a tannery effluent-originated fungal isolate i.e., Aspergillus fumigatus MA under solid state fermentation (SSF) condition. Purification of tannase from culture filtrate was attained using ammonium sulfate precipitation with subsequent diethylaminoethyl (DEAE)-cellulose mediated ion exchange chromatographic technique. Fractional precipitation of the culture filtrate with 60-80% ammonium sulfate yielded 80.9% recovery of tannase with 6.16-fold purification. The enzyme fractions were collected and eluted as a single peak using 0.5 M NaCl-gradient concentration. DEAE-cellulose column chromatography results in overall 23-fold purification with 27.6% recovery of the enzyme. SDS-PAGE analysis of purified tannase confirmed the presence of a single band of protein with a molecular mass equivalent to 66.2 kDa. The highest activity of tannase was observed at optimum pH ranged between 5.0-6.0 whereas, the tannase stability (>80%) was observed at 4.0 to 7.0 pH ranges. The purified tannase activity was found to be optimally active at 30 °C whereas stability (>90%) was accomplished between 30-50 °C temperature. The K m and V max were found to be 1.61 × 10 -3 M and 1.04 mM respectively. These properties suggest the potential of the enzyme to be utilized in various food, feed, and pharmaceutical sectors.

Cutinases are serine esterases that belong to the α/β hydrolases superfamily. The natural substrates for these enzymes are cutin and suberin, components of the plant cuticle, the first barrier in the defense system against pathogen invasion. It is well-reported that plant pathogens produce cutinases to facilitate infection. Fusarium verticillioides, one important corn pathogens, is an ascomycete upon which its cutinases are poorly explored. Consequently, the objective of this study was to perform the biochemical characterization of three precursor cutinases (FvCut1, FvCut2, and FvCut3) from F. verticillioides and to obtain structural insights about them. The cutinases were produced in Escherichia coli and purified. FvCut1, FvCut2, and FvCut3 presented optimal temperatures of 20, 40, and 35 °C, and optimal pH of 9, 7, and 8, respectively. Some chemicals stimulated the enzymatic activity. The kinetic parameters revealed that FvCut1 has higher catalytic efficiency (Kcat/Km) in the p-nitrophenyl-butyrate (p-NPB) substrate. Nevertheless, the enzymes were not able to hydrolyze polyethylene terephthalate (PET). Furthermore, the three-dimensional models of these enzymes showed structural differences among them, mainly FvCut1, which presented a narrower opening cleft to access the catalytic site. Therefore, our study contributes to exploring the diversity of fungal cutinases and their potential biotechnological applications., (Copyright © 2023 Elsevier Inc. All rights reserved.)

With an aim of producing commercially important tannase enzyme using cheap and readily available agro-residues, leaves of Indian Gooseberry ( Phyllanthus emblica ) and Jamun ( Syzygium cumini ), peels of Lemon ( Citrus limon ), and Pomegranate ( Punica granatum ) were screened. Newly isolated Geotrichum cucujoidarum was utilized for the study. Preliminary studies indicated that tannase titer obtained is not proportional to the tannin content of the agro-residues and solid state fermentation superior compared to submerged fermentation. Jamun mixed with lemon peel in equal proportion supplemented with minerals under solid-state fermentation gave a tannase titer of 15.46 U/g dry solids. Through successful implantation of Plackett-Burman design, yeast extract concentration, inoculum volume, and amount of substrate were found to be the most significant factors. Further optimization of these three factors through Response Surface Methodology resulted in the 1.7-fold increase in tannase titer. Validation experiments using 3.97 g of Jamun leaves + lemon peel powder mixed with a nutrient solution having ( w/v ) yeast extract - 1.1%, dextrose - 3%, Urea - 1.125%, potassium chloride - 0.1%, magnesium sulfate heptahydrate - 0.1% with the initial pH of 5, inoculated with 2.48 ml of inoculum gave a tannase titer of 26.43 U/g dry solids after 6 days of solid-state fermentation.

Arabidopsis PHYTOALEXIN DEFICIENT 4 (PAD4) has an essential role in pathogen resistance as a heterodimer with ENHANCED DISEASE SUSCEPTIBILITY 1 (EDS1). Here we investigated an additional PAD4 role in which it associates with and promotes the maturation of the immune-related cysteine protease RESPONSIVE TO DEHYDRATION 19 (RD19). We found that RD19 and its paralog RD19c promoted EDS1- and PAD4-mediated effector-triggered immunity to an avirulent Pseudomonas syringae strain, DC3000, expressing the effector AvrRps4 and basal immunity against the fungal pathogen Golovinomyces cichoracearum. Overexpression of RD19, but not RD19 protease-inactive catalytic mutants, in Arabidopsis transgenic lines caused EDS1- and PAD4-dependent autoimmunity and enhanced pathogen resistance. In these lines, RD19 maturation to a pro-form required its catalytic residues, suggesting that RD19 undergoes auto-processing. In transient assays, PAD4 interacted preferentially with the RD19 pro-protease and promoted its nuclear accumulation in leaf cells. Our results lead us to propose a model for PAD4-stimulated defense potentiation. PAD4 promotes maturation and nuclear accumulation of processed RD19, and RD19 then stimulates EDS1-PAD4 dimer activity to confer pathogen resistance. This study highlights potentially important additional PAD4 functions that eventually converge on canonical EDS1-PAD4 dimer signaling in plant immunity., (© The Author(s) 2023. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.)

Lipolytic enzymes are important contributors in industrial processes from lipid hydrolysis to biofuel production or even polyester biodegradation. While these enzymes can be used in numerous applications, the genotype-phenotype space of certain promising enzymes is still poorly explored. This limits the effective application of such biocatalysts. In this work the genotype space of a 55 kDa carboxylesterase GDEst-95 from Geobacillus sp. 95 was explored using site-directed mutagenesis and directed evolution methods. In this study four site-directed mutants (Gly108Arg, Ala410Arg, Leu226Arg, Leu411Ala) were created based on previous analysis of GDEst-95 carboxylesterase. Error-prone PCR resulted three mutants: two of them with distal mutations: GDEst-RM1 (Arg75Gln), GDEst-RM2 (Gly20Ser Arg75Gln) and the third, GDEst-RM3, with a distal (Ser210Gly) and Tyr317Ala (amino acid position near to the active site) mutation. Mutants with Ala substitution displayed approximately twofold higher specific activity. Arg mutations lead a reduced specific activity, retaining 2.86 % (Gly108Arg), 10.95 % (Ala410Arg), and 44.23 % (Leu226Arg) of lipolytic activity. All three random mutants displayed increased specific activity as well as improved catalytic properties. This research provides the first deeper insights into the functionality of understudied Geobacillus spp. carboxylesterases with 55 kDa in size., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Oligomeric feruloyl esterase (FAE) has great application prospect in industry due to its potentially high stability and fine-tuned activity. However, the relationship between catalytic capability and oligomeric structure remains undetermined. Here we identified and characterized a novel, cold-adapted FAE (BtFae) derived from Bacteroides thetaiotaomicron. Structural studies unraveled that BtFae adopts a barrel-like decameric architecture unique in esterase families. By disrupting the interface, the monomeric variant exhibited significantly reduced catalytic activity and stability toward methyl ferulate, potentially due to its impact on the flexibility of the catalytic triad. Additionally, our results also showed that the monomerization of BtFae severely decreased the ferulic acid release from de-starched wheat bran and insoluble wheat arabinoxylan by 75 % and 80 %, respectively. Collectively, this study revealed novel connections between oligomerization and FAE catalytic function, which will benefit for further protein engineering of FAEs at the quaternary structure level for improved industrial applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

The depolymerization of lignocellulosic biomass is facilitated by feruloyl esterases (FAEs), which hydrolyze ester bonds between lignin and polysaccharides. Fungal FAEs belonging to subfamily (SF) 6 release precursors such as ferulic acid derivatives, attractive for biochemical production. Among these, Aspergillus sydowii FAE (AsFaeE), an SF6 FAE, exhibits remarkable activity across various substrates. In this study, we conducted X-ray crystallography and kinetic analysis to unravel the molecular mechanisms governing substrate recognition and catalysis by AsFaeE. AsFaeE exhibits a typical α/β-hydrolase fold, characterized by a catalytic triad of serine, aspartate, and histidine. Comparative analysis of substrate-free, ferulic acid-bound, and sinapic acid-bound forms of AsFaeE suggests a conformational change in the loop covering the substrate-binding pocket upon binding. Notably, Pro158 and Phe159 within this loop cover the phenolic part of the substrate, forming three layers of planar rings. Our structure-based functional mutagenesis clarifies the roles of the residues involved in substrate binding and catalytic activity. Furthermore, distinct substrate-binding mechanisms between AsFaeE and other studied FAEs are identified. This investigation offers the initial structural insights into substrate recognition by SF6 FAEs, equipping us with structural knowledge that might facilitate the design of FAE variants capable of efficiently processing a wider range of substrate sizes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Amino ester hydrolases (AEHs) are capable of rapid synthesis of cephalexin but suffer from rapid deactivation even at low temperatures. Previous efforts to engineer AEH have generated several improved variants but have been limited in scope in part due to limitations in activity assay throughput for β-lactam synthesis reactions. Rational design of 'whole variants' was explored to rapidly improve AEH thermostability by mutating between 3-15% of residues. Most variants were found to be inactive due to a mutated calcium binding site, the function of which has not previously been described. Four active variants, all with improved melting temperatures, were characterized in terms of synthesis and hydrolysis activity, melting temperature, and deactivation at 25°C. Two variants were found to have improved total turnover numbers relative to the initial AEH variant; however, a clear tradeoff exists between improved stability and overall activity of each variant., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Chlorogenic acid esterases (ChlEs) are a useful class of enzymes that hydrolyze chlorogenic acid (CGA) into caffeic and quinic acids. ChlEs can break down CGA in foods to improve their sensory properties and release caffeic acid in the digestive system to improve the absorption of bioactive compounds. This work presents the structure, molecular dynamics, and biochemical characterization of a ChlE from Lactobacillus helveticus (Lh). Molecular dynamics simulations suggest that substrate access to the active site of LhChlE is modulated by two hairpin loops above the active site. Docking simulations and mutational analysis suggest that two residues within the loops, Gln 145 and Lys 164 , are important for CGA binding. Lys 164 provides a slight substrate preference for CGA, whereas Gln 145 is required for efficient turnover. This work is the first to examine the dynamics of a bacterial ChlE and provides insights on substrate binding preference and turnover in this type of enzyme., (© 2023 The Authors. FEBS Letters published by John Wiley & Sons Ltd on behalf of Federation of European Biochemical Societies.)

Over recent years, Alicyclobacillus acidocaldarius, a Gram-positive nonpathogenic rod-shaped thermo-acid-tolerant bacterium, has posed numerous challenges for the fruit juice industry. However, the bacterium's unique characteristics, particularly its nonpathogenic and thermophilic capabilities, offer significant opportunities for genetic exploration by biotechnologists. This study presents the computational proteogenomics report on the carboxylesterase (CE) enzyme in A. acidocaldarius, shedding light on structural and evolutional of CEs from this bacterium. Our analysis revealed that the average molecular weight of CEs in A. acidocaldarius was 41 kDa, with an isoelectric point around 5. The amino acid composition favored negative amino acids over positive ones. The aliphatic index and hydropathicity were approximately 88 and - 0.15, respectively. While the protein sequence showed no disulfide bonds in the CEs' structure, the presence of Cys amino acids was observed in the structure of CEs. Phylogenetic analysis presented more than 99% similarity between CEs, indicating their close evolutionary relationship. By applying homology modeling, the 3-dimensional structural models of the carboxylesterase were constructed, which with the help of structural conservation and solvent accessibility analysis highlighted key residues and regions responsible for enzyme stability and conformation. The specific patterns presented the total solvent accessibility of less than 25 (Å 2 ) was in considerable position as well as Gly residues were noticeably have high accessibility to solvent in all structures. Ala was the more frequent amino acids in the conserved-SASA of carboxylesterases. Furthermore, unsupervised agglomerative hierarchical clustering based on solvent accessibility feature successfully clustered and even distinguished this enzyme from proteases from the same genome. These findings contribute to a deeper understanding of the nonpathogenic A. acidocaldarius carboxylesterase and its potential applications in biotechnology. Additionally, structural analysis of CEs would help to address potential solutions in fruit juice industry with utilization of computational structural biology., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

The steady growth in industrial production of synthetic plastics and their limited recycling have resulted in severe environmental pollution and contribute to global warming and oil depletion. Currently, there is an urgent need to develop efficient plastic recycling technologies to prevent further environmental pollution and recover chemical feedstocks for polymer re-synthesis and upcycling in a circular economy. Enzymatic depolymerization of synthetic polyesters by microbial carboxylesterases provides an attractive addition to existing mechanical and chemical recycling technologies due to enzyme specificity, low energy consumption, and mild reaction conditions. Carboxylesterases constitute a diverse group of serine-dependent hydrolases catalysing the cleavage and formation of ester bonds. However, the stability and hydrolytic activity of identified natural esterases towards synthetic polyesters are usually insufficient for applications in industrial polyester recycling. This necessitates further efforts on the discovery of robust enzymes, as well as protein engineering of natural enzymes for enhanced activity and stability. In this essay, we discuss the current knowledge of microbial carboxylesterases that degrade polyesters (polyesterases) with focus on polyethylene terephthalate (PET), which is one of the five major synthetic polymers. Then, we briefly review the recent progress in the discovery and protein engineering of microbial polyesterases, as well as developing enzyme cocktails and secreted protein expression for applications in the depolymerisation of polyester blends and mixed plastics. Future research aimed at the discovery of novel polyesterases from extreme environments and protein engineering for improved performance will aid developing efficient polyester recycling technologies for the circular plastics economy., (© 2023 The Author(s).)

Quorum sensing (QS) is the process by which microorganisms employ chemicals called autoinducers (AIs) to communicate with their population. The QS mechanism generally controls the expression of the virulence related genes in bacteria. N-acyl homoserine lactones (AHLs) are the most widespread QS molecules. Due to their diverse AHL-lactonase activities, Bacillus species make particularly suitable candidates for procedures such as demolition of pathogenic bacterial QS signals and bioremediation of β-lactam antibiotics from contaminated environments. In this study, seven Bacillus strains with Quorum quenching (QQ) activity were isolated using an enrichment medium supplemented with Penicillin G (PenG). The AHL-lactonase encoding gene (aiiA) was amplified by PCR and sequenced. Amino acid sequences underwent multiple sequence alignment. Docking studies were carried out with both C6HSL and PenG ligand using AutoDock tools. The aiiA amino acid sequences of the isolates were found to be well conserved. Furthermore, amino acid sequence alignment revealed that 74.9% of amino acid sequences were conserved in the genus Bacillus. Docking of the C6HSL to wild type (3DHA) and H97D variant reduced the docking score by only 0.1 kcal/mol for the mutated protein. When PenG docked with a higher (1.5 kcal/mol) score as a ligand to wild-type and mutant receptors, the docking score for the mutated protein likewise decreased by 0.1 kcal/mol. This research contributed to the diversification of organisms with QQ activity and beta-lactam antibiotic resistance. It also clarified the binding score of the PenG ligand to the Bacillus AHL lactonase molecule for the first time., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Pectin methylesterases (PMEs) are enzymes that play a critical role in modifying pectins, a class of complex polysaccharides in plant cell walls. These enzymes catalyze the removal of methyl ester groups from pectins, resulting in a change in the degree of esterification and consequently, the physicochemical properties of the polymers. PMEs are found in various plant tissues and organs, and their activity is tightly regulated in response to developmental and environmental factors. In addition to the biochemical modification of pectins, PMEs have been implicated in various biological processes, including fruit ripening, defense against pathogens, and cell wall remodelling. This review presents updated information on PMEs, including their sources, sequences and structural diversity, biochemical properties and function in plant development. The article also explores the mechanism of PME action and the factors influencing enzyme activity. In addition, the review highlights the potential applications of PMEs in various industrial sectors related to biomass exploitation, food, and textile industries, with a focus on development of bioproducts based on eco-friendly and efficient industrial processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Feruloyl esterases (FAEs) hydrolyze the ester bonds between hydroxycinnamic acids and arabinose residues of plant cell walls and exhibit considerable diversity in terms of substrate specificity. Here, we report the crystal structure of an FAE from Fusarium oxysporum (FoFaeC) at 1.7 Å resolution in complex with p-coumaric acid, which is the first ligand-bound structure of a tannase-like FAE. Our data reveal local conformational changes around the active site upon ligand binding, suggesting alternation between an active and a resting state of the enzyme. A swinging tyrosine residue appears to be gating the substrate binding pocket, while the lid domain of the protein exerts substrate specificity by means of a well-defined hydrophobic core that encases the phenyl moiety of the substrate., (© 2023 Federation of European Biochemical Societies.)

A novel near-infrared (NIR) fluorescent probe CHC-CES1 based on a hemi-cyanine skeleton for detecting carboxylesterase 1 (CES1) activity was developed. Herein, CHC-CES1 could be specifically hydrolysed to CHC-COOH along with a significant NIR fluorescence signal enhancement at 670 nm. Systematic evaluation indicated that CHC-CES1 possessed an outstanding selectivity and sensitivity towards CES1, and possessed good chemical stability in complex biosamples. Finally, CHC-CES1 was successfully used for the real-time imaging of endogenous CES1 activity in living cells. Moreover, CHC-CES1 was applied to evaluate the inhibitory effects of various pesticides towards CES1, and visually revealed the inhibitory effect of combined residue pesticides.

In recent years, the drawbacks of plastics have become evident, with plastic pollution becoming a major environmental issue. There is an urgent need to find solutions to efficiently manage plastic waste by using novel recycling methods. Biocatalytic recycling of plastics by using enzyme-catalyzed hydrolysis is one such solution that has gained interest, in particular for recycling poly(ethylene terephthalate) (PET). To provide insights into PET hydrolysis by cutinases, we have here characterized the kinetics of a PET-hydrolyzing cutinase from Fusarium solani pisi (FsC) at different pH values, mapped the interaction between FsC and the PET analogue BHET by using NMR spectroscopy, and monitored product release directly and in real time by using time-resolved NMR experiments. We found that primarily aliphatic side chains around the active site participate in the interaction with BHET and that pH conditions and a mutation around the active site (L182A) can be used to tune the relative amounts of degradation products. Moreover, we propose that the low catalytic performance of FsC on PET is caused by poor substrate binding combined with slow MHET hydrolysis. Overall, our results provide insights into obstacles that preclude efficient PET hydrolysis by FsC and suggest future approaches for overcoming these obstacles and generating efficient PET-hydrolyzing enzymes.

Enhanced Disease Susceptibility 1 (EDS1), a key component of microbe-triggered immunity and effector-triggered immunity in most higher plants, forms functional heterodimeric complexes with its homologs Phytoalexin Deficient 4 (PAD4) or Senescence-associated Gene 101 (SAG101). Here, the crystal structure of VvEDS1 Nterm , the N-terminal domain of EDS1 from Vitis vinifera, is reported, representing the first structure of an EDS1 entity beyond the model plant Arabidopsis thaliana. VvEDS1 Nterm has an α/β-hydrolase fold, is similar to the N-terminal domain of A. thaliana EDS1 and forms stable homodimers in solution as well as in crystals. These VvEDS1 Nterm homodimers are spatially incompatible with heterodimers with PAD4 or SAG101, they explain why VvEDS1 Nterm does not interact with V. vinifera PAD4 according to gel filtration, and they serve as a guide to develop a plausible, albeit experimentally not verified model of full-length EDS1. VvEDS1 Nterm is a splicing variant comprising two of three exons of the VvEDS1 gene. It originates from a naturally occurring mRNA, in which the first of two introns was removed while the second one containing a stop codon close to the exon/intron border was retained. This is a potential case of intron retention and the first report of this phenomenon in the context of EDS1. Its biological significance has not yet been clarified, nor has the question if a VvEDS1 Nterm protein with a specific function can occur under physiological conditions., (© 2023 The Authors. Protein Science published by Wiley Periodicals LLC on behalf of The Protein Society.)

Feruloyl esterases (FAEs, EC 3.1.1.73) catalyze the hydrolytic cleavage of ester bonds between feruloyl and arabinosyl moieties in arabinoxylans. Recently, we discovered that two bacterial FAEs could catalyze release of diferulic acids (diFAs) from highly substituted, cross-linked corn bran arabinoxylan. Here, we show that several fungal FAEs, notably AnFae1 (Aspergillus niger), AoFae1 (A. oryzae), and MgFae1 (Magnaporthe oryzae (also known as M. grisae)) also catalyze liberation of diFAs from complex arabinoxylan. By comparing the enzyme kinetics of diFA release to feruloyl esterase activity of the enzymes on methyl- and arabinosyl-ferulate substrates we demonstrate that the diFA release activity cannot be predicted from the activity of the enzymes on these synthetic substrates. A detailed structure-function analysis, based on AlphaFold2 modeled enzyme structures and docking with the relevant di-feruloyl ligands, reveal how distinct differences in the active site topology and surroundings may explain the diFA releasing action of the enzymes. Interestingly, the analysis also unveils that the carbohydrate binding module of the MgFae1 may play a key role in the diFA releasing ability of this enzyme. The findings contribute further understanding of the function of FAEs in the deconstruction of complex arabinoxylans and provide new opportunities for enzyme assisted upgrading of complex bran arabinoxylans., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)