Search

The near surface mounted (NSM) method of inserting fiber reinforced polymer (FRP) elements (rods or lamina) into notches has been shown to be a good way for restoring reinforced concrete (RC) elements. The knowledge about the use of Glass-FRP rod following the NSM to reinforce RC beams is limited. This paper deals with the analysis of static and dynamic behaviour of RC beams with and without strengthening. The response of RC beams was assessed at different concrete's damage level by non-destructive vibration tests. First, a couple of beams have been analysed: one RC beam subjected to bending and under vibration tests; another one beam, damaged by bending and strengthened with NSM Carbon-FRP rods tested again under vibration. Further, one RC beam damage was analysed under bending and vibration tests without strengthening; successively, the beam model with NSM GFRP rod has been tested following the same loading path. Below experimental results are shown and commented; in particular, changes in frequency values are related to the evolution of damage level affected RC beams with NSM CFRP and GFRP rods. [ABSTRACT FROM AUTHOR]

In this paper experimental results of investigation on reinforced concrete (RC) beams strengthened with the near surface method (NSM) are analyzed considering the response under bending tests on two beams. One of the RC beams was damaged by bending until the yield of reinforcement and successively strengthened with carbon fiber polymer (CFRP) rod, while the second beam was strengthened with glass-FRP rod. Both the beams have been subjected to bending tests until failure. Experimental diagrams and discussion on static response are presented in the paper. It also places a particular emphasis on the non-linear response of RC sections strengthened with CFRP and GFRP rods under bending moment beyond the first elastic behavior. [ABSTRACT FROM AUTHOR]