Search

Quantifying electron-phonon interactions for the surface states of topological materials can provide key insights into surface-state transport, topological superconductivity, and potentially how to manipulate the surface state using a structural degree of freedom. We perform time-resolved x-ray diffraction (XRD) and angle-resolved photoemission (ARPES) measurements on Bi$_2$Te$_3$ and Bi$_2$Se$_3$, following the excitation of coherent A$_{1g}$ optical phonons. We extract and compare the deformation potentials coupling the surface electronic states to local A$_{1g}$-like displacements in these two materials using the experimentally determined atomic displacements from XRD and electron band shifts from ARPES.We find the coupling in Bi$_2$Te$_3$ and Bi$_2$Se$_3$ to be similar and in general in agreement with expectations from density functional theory. We establish a methodology that quantifies the mode-specific electron-phonon coupling experimentally, allowing detailed comparison to theory. Our results shed light on fundamental processes in topological insulators involving electron-phonon coupling.

We present first-principles quantum transport simulations of single-walled carbon nanotubes based on the NEGF method and including carrier-carrier interactions within the self-consistent GW approximation. Motivated by the characteristic enhancement of interaction between charge carriers in one-dimensional systems, we show that the developed framework can predict Auger recombination, hot carrier relaxation, and impact ionization in this type of nanostructures. Using the computed scattering rates, we infer the inverse electron-hole pair lifetimes for different Auger processes in several device configurations.

A van der Waals (vdW) charge qubit, electrostatically confined within two-dimensional (2D) vdW materials, is proposed as building block of future quantum computers. Its characteristics are systematically evaluated with respect to its two-level anti-crossing energy difference ($\Delta$). Bilayer graphene ($\Delta$ $\approx$ 0) and a vdW heterostructure ($\Delta$ $\gg$ 0) are used as representative examples. Their tunable electronic properties with an external electric field define the state of the charge qubit. By combining density functional theory and quantum transport calculations, we highlight the optimal qubit operation conditions based on charge stability and energy-level diagrams. Moreover, a single-electron transistor (SET) design based on trilayer vdW heterostructures capacitively coupled to the charge qubit is introduced as measurement setup with low decoherence and improved measurement properties. It is found that a $\Delta$ greater than 20 meV results in a rapid mixing of the qubit states, which leads to a lower measurement quantity, i.e. contrast and conductance. With properly optimized designs, qubit architectures relying on 2D vdW structures could be integrated into an all-electronic quantum computing platform.

Achieving high valley degeneracy (i.e. "band convergence") in a material usually results in considerably enhanced thermoelectric properties. However, it is still unclear why this strategy of designing efficient thermoelectric materials is so successful, since the benefit of increased density of states may be severely degraded by intervalley scattering. Using first-principles calculations, we investigate these effects in $p$-type PbTe, where temperature induces alignment of the $L$ and $\Sigma$ valleys at $\sim$~620~K. We explicitly show that the thermoelectric power factor and figure of merit peak near the band convergence temperature. The figure of merit maximum is larger than those of the individual $L$ and $\Sigma$ valleys. Surprisingly, intervalley scattering does not considerably affect the figure of merit near the band convergence temperature and optimal doping conditions, although it reduces the power factor by almost a factor of 2. Our results suggest that band convergence will significantly increase the figure of merit if intervalley scattering is roughly proportional to the density of states and the lattice thermal conductivity is considerably lower than the electronic thermal conductivity, even if intervalley scattering is strong., Comment: 15 pages, 6 figures, Journal publication

Spectral approximation and variational inducing learning for the Gaussian process are two popular methods to reduce computational complexity. However, in previous research, those methods always tend to adopt the orthonormal basis functions, such as eigenvectors in the Hilbert space, in the spectrum method, or decoupled orthogonal components in the variational framework. In this paper, inspired by quantum physics, we introduce a novel basis function, which is tunable, local and bounded, to approximate the kernel function in the Gaussian process. There are two adjustable parameters in these functions, which control their orthogonality to each other and limit their boundedness. And we conduct extensive experiments on open-source datasets to testify its performance. Compared to several state-of-the-art methods, it turns out that the proposed method can obtain satisfactory or even better results, especially with poorly chosen kernel functions., Comment: 10 figures

We investigate the design of steep-slope metal-oxide-semiconductor field-effect transistors (MOSFETs) exploiting monolayers of transition metal dihalides as channel materials. With respect to other previously proposed steep-slope transistors, these devices require simplified manufacturing processes, as no confinement of the 2D material is needed, nor any tunneling heterojunction or ferroelectric gate insulators, and only n- or p-type contacts are demanded. We demonstrate their operation by studying an implementation based on monolayer CrI$_2$ through quantum transport simulations. We show that the subthermionic capabilities of the device originate from a cold-source effect, intrinsically driven by the shape of the band structure of the 2D material and robust against the effects of thermalization induced by the electron-phonon interactions. Due to the absence of a tunneling barrier when the device is switched on, current levels can be achieved that are typically out of reach for tunnel FETs. The device also exhibits excellent scaling properties, maintaining a subthermionic subthreshold swing (SS) up to channel lengths as short as 5 nm., Comment: 7 pages, 8 figures

Two-dimensional (2D) semiconductors are promising channel materials for next-generation field-effect transistors (FETs) thanks to their unique mechanical properties and enhanced electrostatic control. However, the performance of these devices can be strongly limited by the scattering processes between carriers and phonons, usually occurring at high rates in 2D materials. Here, we use quantum transport simulations calibrated on first-principle computations to report on dissipative transport in antimonene and arsenene $n$-type FETs at the scaling limit. We show that the widely-used approximations of either ballistic transport or simple acoustic deformation potential scattering result in large overestimation of the ON current, due to neglecting the dominant intervalley and optical phonon scattering processes. We additionally investigate valley engineering strategy [Nano Lett. \textbf{19}, 3723 (2019)] to improve the device performance by removing the valley degeneracy and suppressing most of the intervalley scattering channels via an uniaxial strain along the zigzag direction. The method is applicable to other similar 2D semiconductors characterized by multivalley transport., Comment: 9 pages, 7 figures

IV-VI materials are some of the most efficient bulk thermoelectric materials due to their proximity to soft-mode phase transitions, which leads to low lattice thermal conductivity. It has been shown that the lattice thermal conductivity of PbTe can be considerably reduced by bringing PbTe closer to the phase transition e.g. via lattice expansion. However, the effect of soft phonon modes on the electronic thermoelectric properties of such system remains unknown. Using first principles calculations, we show that the soft zone center transverse optical phonons do not deteriorate the electronic thermoelectric properties of PbTe driven closer to the phase transition via lattice expansion due to external stress, and thus enhance the thermoelectric figure of merit. We find that the optical deformation potentials change very weakly as the proximity to the phase transition increases, but the population and scattering phase space of soft phonon modes increase. Nevertheless, scattering between electronic states near the band edge and soft optical phonons remains relatively weak even very near the phase transition., Comment: 8 pages, 7 figures

The availability of transistors capable of operating at low supply voltage is essential to improve the key performance metric of computing circuits, i.e., the number of operations per unit energy. In this paper, we propose a new device concept for energy-efficient, steep-slope transistors based on heterojunctions of 2D materials. We show that by injecting electrons from an isolated and weakly dispersive band into a strongly dispersive one, subthermionic subthreshold swings can be obtained, as a result of a cold-source effect and of a reduced thermalization of carriers. This mechanism is implemented by integrating in a MOSFET architecture two different monolayer materials coupled through a van der Waals heterojunction, combining the subthermionic behavior of tunnel field-effect transistors (FETs) with the robustness of a MOSFET architecture against performance-degrading factors, such as traps, band tails and roughness. A further advantage with respect to tunnel FETs is that only an n-type or p-type doping is required to fabricate the device. In order to demonstrate the device concept and to discuss the underlying physics and the design options, we study through abinitio and full-quantum transport simulations a possible implementation that exploits two recently reported 2D materials., Comment: Accepted for publication in Physical Review Research

The interactions between electrons and lattice vibrational modes play the key role in determining the carrier transport properties, thermoelectric performance and other physical quantities related to phonons in semiconductors. However, for two-dimensional (2D) materials, the widely-used models for carrier transport only consider the interactions between electrons and some specific phonon modes, which usually leads to inaccruate predictions of electrons/phonons transport properties. In this work, comprehensive investigations on full electron-phonon couplings and their influences on carrier mobility and thermoelectric performances of 2D group-IV and V elemental monolayers were performed, and we also analyzed in details the selection rules on electron-phonon couplings using group-theory arguments. Our calculations revealed that, for the cases of shallow dopings where only intravalley scatterings are allowed, the contributions from optical phonon modes are significantly larger than those from acoustic phonon modes in group-IV elemental monolayers, and LA and some specific optical phonon modes contribute significantly to the total intravalley scatterings. When the doping increases and intervalley scatterings are allowed, the intervalley scatterings are much stronger than intravalley scatterings, and ZA/TA/LO phonon modes dominate the intervalley scatterings in monolayer Si, Ge and Sn. The dominant contributions to the total intervalley scatterings are ZA/TO in monolayer P, ZA/TO in monolayer As and TO/LO in monolayer Sb. Based on the thorough investigations on the full electron-phonon couplings, we predict accurately the carrier mobilities and thermoelectric figure of merits in these two elemental crystals, and reveal significant reductions when compared with the calculations based on the widely-used simplified model., Comment: 7 pages

We present a first principles based model of electron-phonon scattering mechanisms and thermoelectric transport at the L and $\Sigma$ valleys in <200b>$p$-type PbTe, accounting for their thermally induced shifts. Our calculated values of all thermoelectric transport parameters at room temperature are in very good agreement with experiments for a wide range of doping concentrations. Scattering due to longitudinal optical phonons is the main scattering mechanism in $p$-type PbTe, while scattering due to transverse optical modes is the weakest. The L valleys contribute most to thermoelectric transport at 300 K due to the sizeable energy difference between the L and $\Sigma$ valleys. We show that both scattering between the L and $\Sigma$ valleys and additional transport channels of the $\Sigma$ valleys are beneficial for the overall thermoelectric performance of $p$-type PbTe at 300 K. Our findings thus support the idea that materials with high valley degeneracy may be good thermoelectrics., Comment: 16 pages, 6 figures

The temperature renormalization of the bulk band structure of a topological crystalline insulator, SnTe, is calculated using first principles methods. We explicitly include the effect of thermal-expansion-induced modification of electronic states and their band inversion on electron-phonon interaction. We show that the direct gap decreases with temperature, as both thermal expansion and electron-phonon interaction drive SnTe towards the phase transition to a topologically trivial phase as temperature increases. The band gap renormalization due to electron-phonon interaction exhibits a non-linear dependence on temperature as the material approaches the phase transition, while the lifetimes of the conduction band states near the band edge show a non-monotonic behavior with temperature. These effects should have important implications on bulk electronic and thermoelectric transport in SnTe and other topological insulators., Comment: 10 pages, 8 figures. Accepted for publication in Phys. Rev. B on June 8, 2020

The strategy of band convergence of multi-valley conduction bands or multi-peak valence bands has been widely used to search or improve thermoelectric materials. However, the phonon-assisted intervalley scatterings due to multiple band degeneracy are usually neglected in the thermoelectric community. In this work, we investigate the (thermo)electric properties of non-polar monolayer $\beta$- and $\alpha$-antimonene considering full mode- and momentum-resolved electron-phonon interactions. We also analyze thoroughly the selection rules on electron-phonon matrix-elements using group-theory arguments. Our calculations reveal strong intervalley scattering between the nearly degenerate valley states in both $\beta$- and $\alpha$-antimonene, and the commonly-used deformation potential approximation neglecting the dominant intervalley scattering gives inaccurate estimations of the electron-phonon scattering and thermoelectric transport properties. By considering full electron-phonon interactions based on the rigid-band approximation, we find that, the maximum value of the thermoelectric figure of merits $zT$ at room temperature reduces to 0.37 in $\beta$-antimonene, by a factor of 5.7 comparing to the value predicted based on the constant relaxation-time approximation method. Our work not only provides an accurate prediction of the thermoelectric performances of antimonenes that reveals the key role of intervalley scatterings in determining the electronic part of zT, but also showcases a computational framework for thermoelectric materials., Comment: 7 figures

Unlike in many other semiconductors, the band gap of PbTe increases considerably with temperature. We compute the thermoelectric transport properties of n-type PbTe from first principles including the temperature variation of the electronic band structure. The calculated temperature dependence of the thermoelectric quantities of PbTe is in good agreement with previous experiments when the temperature changes of the band structure are accounted for. We also calculate the optimum band gap values which would maximize the thermoelectric figure of merit of n-type PbTe at various temperatures. We show that the actual gap values in PbTe closely follow the optimum ones between 300 K and 900 K, resulting in the high figure of merit. Our results indicate that an appreciable increase of the band gap with temperature in direct narrow-gap semiconductors is very beneficial for achieving high thermoelectric performance., Comment: 10 pages, 9 figures