Search

The design of an active, effective, and economically viable catalyst for CO 2 conversion into value-added products is crucial in the fight against global warming and energy demand. We have developed very efficient catalysts for reverse water-gas shift (rWGS) reaction. Specific conditions of the synthesis by combustion allow the obtention of macroporous materials based on nanosized Ni particles supported on a mixed oxide of high purity and crystallinity. Here, we show that Ni/La-doped CeO 2 catalysts─with the "right" Ni and La proportions─have an unprecedented catalytic performance per unit mass of catalyst for the rWGS reaction as the first step toward CO 2 valorization. Correlations between physicochemical properties and catalytic activity, obtained using a combination of different techniques such as X-ray and neutron powder diffraction, Raman spectroscopy, in situ near ambient pressure X-ray photoelectron spectroscopy, electron microscopy, and catalytic testing, point out to optimum values for the Ni loading and the La proportion. Density functional theory calculations of elementary steps of the reaction on model Ni/ceria catalysts aid toward the microscopic understanding of the nature of the active sites. This finding offers a fundamental basis for developing economical catalysts that can be effectively used for CO 2 reduction with hydrogen. A catalyst based on Ni 0.07 /(Ce 0.9 La 0.1 O x ) 0.93 shows a CO production of 58 × 10 -5 mol CO ·g cat -1 ·s -1 (700 °C, H 2 /CO 2 = 2; selectivity to CO > 99.5), being stable for 100 h under continuous reaction.

The monolacunary Keggin-type [PW 11 O 39 ] 7- (PW 11 ) heteropolyanion was immobilized on porous framework of mesoporous silicas, namely SBA-15 and an ethylene-bridged periodic mesoporous organosilica (PMOE). The supports were functionalized with a cationic group ( N -trimethoxysilypropyl- N, N, N -trimethylammonium, TMA) for the successful anchoring of the anionic polyoxometalate. The PW 11 @TMA-SBA-15 and PW 11 @TMA-PMOE composites were evaluated as heterogeneous catalysts in the oxidative desulfurization of a model diesel. The PW 11 @TMA-SBA-15 catalyst showed a remarkable desulfurization performance by reaching ultra-low sulfur levels (<10 ppm) after only 60 min using either a biphasic extractive and catalytic oxidative desulfurization (ECODS) system (1:1 MeCN/diesel) or a solvent-free catalytic oxidative desulfurization (CODS) system. Furthermore, the mesoporous silica composite was able to be recycled for six consecutive cycles without any apparent loss of activity. The promising results have led to the application of the catalyst in the desulfurization of an untreated real diesel supplied by CEPSA (1,335 ppm S) using the biphasic system. The system has proved to be a highly efficient process by reaching desulfurization values higher than 90% for real diesel during three consecutive cycles., (Copyright © 2019 Ribeiro, Granadeiro, Corvo, Pires, Campos-Martin, de Castro and Balula.)

Mesocrystals (basically nanostructures showing alignment of nanocrystals well beyond crystal size) are attracting considerable attention for modeling and optimization of functionalities. However, for surface-driven applications (heterogeneous catalysis), only those mesocrystals with excellent textural properties are expected to fulfill their potential. This is especially true for oxidative desulfuration of dibenzothiophenes (hard to desulfurize organosulfur compounds found in fossil fuels). Here, we probe the catalytic activity of anatases for the oxidative desulfuration of dibenzothiophenes under atmospheric pressure and mild temperatures. Specifically, for this study, we have taken advantage of the high stability of the (101) anatase surface to obtain a variety of uniform colloidal mesocrystals (approximately 50 nm) with adequate orientational order and good textural properties (pores around 3-4 nm and surface areas around 200 m 2 /g). Ultimately, this stability has allowed us to compare the catalytic activity of anatases that expose a high number of aligned single crystal-like surfaces while differing in controllable surface characteristics. Thus, we have established that the type of tetrahedral coordination observed in these anatase mesocrystals is not essential for oxidative desulfuration and that both elimination of sulfates and good textural properties significantly improve the catalytic activity. Furthermore, the most active mesocrystals have been used to model the catalytic reaction in three-(oil-solvent-catalyst) and two-phase (solvent-catalyst) systems. Thus, we have been able to observe that the transfer of DBT from the oil to the solvent phase partially limits the oxidative process and to estimate an apparent activation energy for the oxidative desulfuration reaction of approximately 40 kJ/mol in the two-phase system to avoid mass transfer limitations. Our results clearly establish that (101) anatase mesocrystals with excellent textural properties show adequate stability to withstand several post-treatments without losing their initial mesocrystalline character and therefore could serve as models for catalytic processes different from the one studied here., Competing Interests: The authors declare no competing financial interest.

This work describes a relatively simple methodology for efficiently deconstructing cellulose into monomeric glucose, which is more easily transformed into a variety of platform molecules for the production of chemicals and fuels. The approach undertaken herein first involves the dissolution of cellulose in an ionic liquid (IL), followed by a second reconstruction step aided by an antisolvent. The regenerated cellulose exhibited strong structural and morphological changes, as revealed by XRD and SEM analyses. These changes dramatically affect the hydrolytic reactivity of cellulose with dilute mineral acids. As a consequence, the glucose yield obtained from the deconstructed-reconstructed cellulose was substantially higher than that achieved through hydrolysis of the starting cellulose. Factors that affect the hydrolysis reaction include the type of cellulose substrate, the type of IL used in pretreatment, and the type of acid used in the hydrolysis step. The best results were obtained by treating cellulose with IL and using phosphotungstic acid (0.067 mol L(-1) ) as a catalyst at 413 K. Under these conditions, the conversion of cellulose was almost complete (>99%), with a glucose yield of 87% after only 5 h of reaction., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

First direct images of cobalt nanoparticles covered by a few atomic layers thick TiO(x) moieties after reduction treatment of a Co/TiO(2) system with the simultaneous formation of Co-O-Ti bonds confirm the development of the SMSI decoration effect., (This journal is © The Royal Society of Chemistry 2011)

Titanium/silica systems were prepared by grafting a titanium alkoxide (titanium isopropoxide and titanium (triethanolaminate) isopropoxide) precursor onto amorphous silica. The grafting process, which consisted of the hydrolysis of the Ti precursor by the hydroxyl groups on the silica surface, yielded samples containing Ti-loadings of 1-1.6 wt %. The as synthesized and calcined TiO(2)-SiO(2) samples were characterized by UV-vis, FTIR, XPS, and XANES spectroscopic techniques. These systems were tested in the liquid-phase epoxidation of oct-1-ene with hydrogen peroxide reaction. Spectroscopic data indicated that titanium anchoring takes place by reaction between the alkoxide precursor and surface OH groups of the silica substrate. The nature of surface titanium species generated by chemical grafting depends largely on the titanium precursor employed. Thus, the titanium isopropoxide precursor yields tetrahedrally coordinated polymeric titanium species, which give rise to a low-efficiency catalyst. However, if an atrane precursor (titanium (triethanolaminate) isopropoxide) is employed, isolated titanium species are obtained. The fact that these species remain isolated even after calcination is due to the protective effect of the triethanolaminate ligand that avoids titanium polymerization. These differences in the titanium environment have a pivotal role in the performance of these systems in the epoxidation of alkenes with hydrogen peroxide.

Hydrogen peroxide (H2O2) is widely used in almost all industrial areas, particularly in the chemical industry and environmental protection. The only degradation product of its use is water, and thus it has played a large role in environmentally friendly methods in the chemical industry. Hydrogen peroxide is produced on an industrial scale by the anthraquinone oxidation (AO) process. However, this process can hardly be considered a green method. It involves the sequential hydrogenation and oxidation of an alkylanthraquinone precursor dissolved in a mixture of organic solvents followed by liquid-liquid extraction to recover H2O2. The AO process is a multistep method that requires significant energy input and generates waste, which has a negative effect on its sustainability and production costs. The transport, storage, and handling of bulk H2O2 involve hazards and escalating expenses. Thus, novel, cleaner methods for the production of H2O2 are being explored. The direct synthesis of H2O2 from O2 and H2 using a variety of catalysts, and the factors influencing the formation and decomposition of H2O2 are examined in detail in this Review.

Palladium catalysts supported on gamma-alumina (AN, AS), amorphous silica-alumina (ASA), and beta-zeolite (betaZ) were prepared with the aim to reduce the content of polycyclic aromatic hydrocarbons (PAHs) in diesel fuels. The removal of PAH compounds was evaluated with a model feed (toluene, naphthalene, and dibenzothiophene)that approached the composition of diesel fuel. The catalysts were characterized by N2 adsorption-desorption isotherms, X-ray photoelectron spectroscopy, transmission electron microscopy, temperature-programmed reduction/temperature-programmed oxidation, Fourier transform (FT) IR of absorbed CO, and diffuse reflectance FT spectroscopy of adsorbed NH3. When palladium was supported on ASA instead of AN or betaZ, the intrinsic activity improved considerably. Such behavior is discussed in terms of larger Brønsted acidity and the degree of reduction of the Pd species on Pd/ASA. For the 2.2 Pd/betaZ catalyst, interaction of the Pd clusters with zeolite protons led to formation of Pddelta+ species, which are not active in the hydrogenation of aromatics. All catalysts were resistant to poisoning by S compounds.

A commercial mesoporous silica (Grace Davison) was chemically grafted with trimethylsilyl chloride (TMSCl) and hexamethyldisilanaze (HMDS). The silylation process brought about some reduction in the specific BET area, the pore volume, and the pore sizes of the samples. Thermogravimetric studies of the silylated samples revealed that the grafting process is kinetically controlled at short reaction times. In the kinetic regime, increasing concentrations of the silylant agent up to 2 wt% in the solvent led to an increase of the extent of the silylated surface, although this limitation disappeared at higher concentrations. Silylation was confirmed by diffuse reflectance infrared Fourier transform (DRIFTS), (29)Si CP-MAS NMR, and photoelectron (XPS) spectroscopic techniques. Solid-state (29)Si MAS-NMR spectra of the silylated samples revealed the presence of -SiCH(3) groups (9.5 ppm) together with two resonances, Q3 (approximately equal to -104 ppm) and Q4 (approximately equal to -114 ppm), coming from siloxane [Qn approximately Si(OSi)n(OH)(4-n), n approximately 2-4] groups, the Q3 signal decreasing upon silylation. The DRIFT spectra of the silylated samples exhibited two well defined bands at 2970 and 2907 cm(-1), due to stretching vibration modes of the C-H bonds in surface -CH(3) groups formed during the silylation process, and also the disappearance of the band at 3740 cm(-1). This observation indicates the complete removal of terminal and geminal hydroxyl groups by grafting with the silylating agent. Similarly, high-resolution photoelectron spectra of the Si2p core levels showed a high binding-energy component (103.5 eV) in all the samples, coming from the Si coordinated with oxide anions in SiO(2), together with a second component at 102.1 eV, which is the fingerprint of Si coordinated by oxide anions and an organic group. Finally, the samples were ranked according to their hydrophobicity, as determined from the temperature-programmed desorption profiles of adsorbed water and 2-methylbutane.

A simple procedure for the preparation of amorphous silica containing thiol groups which quantitatively affords sulfonic acid groups has been developed, resulting in site densities and activity for the esterification of acetic acid with methanol greater than a commercial Nafion silica composite.