Search

Intramuscular tenderness variation and muscle fiber orientation of beef M. adductor femoris (AF), M. biceps femoris (BF), M. gracilis (GL), M. pectineus (PT), M. sartorius (SR), M. semimembranosus (SM), M. semitendinosus (SO), M. vastus intermedius (VI), M. vastus medialis (VM), and M. vastus lateralis (VL) were investigated. The USDA Choice boxed beef subprimals were purchased and aged for 14 d from boxed date. The AF, BF, GL, PT, SR, SM, SO, VI, VM, and VL (n = 10 each) were fabricated from subprimals. Crust-frozen AF, BF, SO, SM, and VL were cut into 2.54-cm steaks perpendicular to the long axis and grilled (71[degrees]C). The PT, SR, VI, and VM were grilled (71[degrees]C) as whole muscles, whereas the GL was grilled after cutting into anterior and posterior regions. Grilled muscles were cut into equal size sections perpendicular to long axis of muscles. Location-specific cores were prepared from each steak/section, and Warner-Bratzler shear force (WBSF) was measured. The muscle fiber orientations of BF, PT, and VI were bipennate, SR and SO were fusiform, and AD, SM, VL, GL, and VM were unipennate. The overall mean WBSF values for BF, SO, AF, SM, PT, SR, GL, VI, VM, and VL were 5.62, 4.86, 4.18, 4.90, 3.76, 4.44, 4.75, 4.78, 4.24, and 6.53 kg, respectively. Based on WBSF values, PT was tender, BF and VL were tough, and VM, VI, SM, GL SR, AF, and SO were intermediate. The first 2 proximal steaks of long head BF were more tender than the rest (P < 0.05). In the SO, the tenderness decreased from the middle of the muscle to both ends (P < 0.05). The anterior sides of the long head BF and SO were tougher than their posterior sides (P < 0.05).The first 4 steaks of the SM were more tender than the rest of the muscle (P < 0.05). There was a significant tenderness increment from the middle of the AF and SR to both ends of each muscle (P < 0.05). The medial side of the VI was more tender than its lateral side (P < 0.05). The VM had its smallest shear force value at the most distal end compared with the rest (P < 0.05). Dry or moist heat oven roasting, as compared with grilling, significantly tenderized SO (P = 0.002) and VL (P < 0.0001) muscles. There were no significant WBSF value differences along the PT and between anterior and posterior regions of the GL. Based on WBSF ratings, PT, SR, VM, GL, and VI could be merchandized as single muscle steaks or medallions and the first 2 to 4 steaks of long head BF, SM, and AF could be marketed as premium-quality steaks. This detailed information on intramuscular tenderness and muscle fiber orientation variations of the round muscles could be used in a value added strategy for the beef round. Key words: beef round muscle, intramuscular tenderness, muscle fiber orientation doi: 10.2527/jas.2009-2683

The M. quadriceps femoris from USDA Choice (n = 12) and USDA Select (n = 12) carcasses were fabricated traditionally (COLD) or innovatively (HOT), in which the seams it shares with the top round and bottom round were separated prerigor to evaluate positional and locational effects on Warner-Bratzler shear force (WBSF), sensory attributes, and objective color. At slaughter, paired USDA Choice and USDA Select carcasses were alternately assigned either the HOT or COLD treatment. At 48 h postslaughter, subprimals were removed, vacuum-packaged, and aged for an additional 5 d. After aging, the M. quadriceps femoris was cut into 2.54-cm-thick steaks and allowed to bloom 1 h. For the M. rectus femoris (REC) and M. vastus lateralis (VAL), [L.sup.*] values significantly (P < 0.050) decreased when moving from the proximal to distal position within the muscle. Similarly, [a.sup.*] and [b.sup.*] values decreased in the VAL when moving from the proximal to the distal aspect. After color measurement, steaks were vacuum-packaged and frozen (-26[degrees]C) until shear and sensory data were collected. Significant position (proximal to distal) and location effects (cranial to caudal) were noted for both muscles. However, treatment did not affect WBSF of the VAL. Although intramuscular variation existed, WBSF and sensory panel tenderness ratings were acceptable for the REC. Although WBSF values were greater and tenderness ratings were less than the REC, the VAL were not extremely tough and therefore could be used in enhancement applications. Key words: beet, color, knuckle, tenderness, value cut

The objective of this study was to identify muscles from cow populations that are equivalent or may possibly be made equivalent to muscles from A-maturity, Select-grade cattle in terms of chemical, compositional, and color characteristics. Objective color, expressible moisture, proximate composition, pH, heme iron concentration, and total collagen content were determined for 9 muscles (M. gluteus medius, M. infraspinatus, M. longissimus dorsi, M. psoas major, M. rectus femoris, M. tensor fascia latae, M. teres major, M. triceps brachii lateral-head, and M. triceps brachii long-head) from 15 cattle from each of 5 commercially identified populations [fed beef cows (B-F), non-fed beef cows (B-NF), fed dairy cows (D-F), non-fed dairy cows (D-NF), and A-maturity, Select-grade cattle (SEL)]. Muscles from B-F and B-NF populations were more similar to the SEL than were the D-F and D-NF. There were 2 muscles, the M. infraspinatus and M. teres major, from the population of B-F that were similar, physically and chemically, to SEL in most traits. The majority of the 9 muscles from the cows did not differ (P < 0.05) from SEL for percentage expressible moisture, proximate composition, and total collagen content. However, notable differences in pH, objective color L*, total pigment content, and heme iron content existed between cow populations and SEL. The muscles from SEL had significantly (P < 0.05) lower total pigment and heme iron concentrations. These differences likely relate to the visual appearance of muscles from the different populations of cattle. Two of the 9 muscles studied were similar among cow populations and A-maturity, Select-grade beef. Key words: cow muscle, beef, color, composition, dairy, muscle property

The objective of this study was to determine whether aging would alter the beneficial effects (tenderness, juiciness, and flavor) of enhancing beef chuck and round steaks with a 20% solution of water, ammonium hydroxide, salt, and carbon monoxide. A randomized, complete block design was used, with 2 treatments [0% (control) and 20% (pump)], 3 aging periods (1, 2, and 3 wk), 3 muscles (M. triceps brachii from the clod heart, M. biceps femoris from the sirloin cap, and M. rectus femoris from the knuckle), and 3 replications. There were a total of 12 subprimals per treatment per aging period (n = 72 each). Individual steaks were cut to a thickness of 2.54 cm and packaged in a high-oxygen modified-atmosphere package (80% oxygen, 20% carbon dioxide). At the end of the aging period, steaks were vacuum packaged and frozen. Steaks were used to determine Warner-Bratzler shear force (WBS) and consumer sensory ratings. For all muscles, WBS values were lower for pump steaks than control at every aging period (P < 0.050). In addition, as aging period increased, WBS values for all steaks increased. Consumer taste panels revealed more desirability for tenderness, juiciness, flavor, and overall acceptability for pump steaks than control steaks. In addition, steaks aged for 1 d were more desirable than steaks aged for 7 and 14 d (P < 0.050). These data indicate that aging does not decrease the benefits (tenderness, juiciness, and flavor) of enhancement. Key words: aging, beef, pH enhancement, tenderness

The objective of this study was to determine the retail shelf stability of beef chuck and round muscles enhanced with ammonium hydroxide, salt, and carbon monoxide. A split plot design was used for each of 3 muscles [triceps brachii (TB), biceps femoris (BF), and rectus femoris (RF)] with 2 treatments (0 and 20% pump), 3 dark storage periods (1, 2, and 3 wk), and 3 replications in the whole plot and retail display period as the split plot. There were a total of 12 subprimals per treatment per dark storage period (n = 72 each). Individual steaks were cut to a thickness of 2.54 cm and packaged in a modified-atmosphere package (MAP). The TB was packaged in a high-oxygen MAP (80% oxygen, 20% carbon dioxide). The BF and RF were packaged in a low-oxygen MAP (100% carbon dioxide). At the completion of each dark storage period, steaks were subjected to 7 d of simulated retail display. Steaks were used for objective and subjective color measurements, total plate counts, and determination of retail purge and oxidation. For all muscles, total plate counts were always numerically greater in injected steaks. Triceps brachii steaks held in dark storage for 3 wk and displayed at retail for 4 or more days all exceeded 107 log of cfu/[cm.sup.2] for aerobic plate count. Biceps femoris and RF steaks packaged in a low-oxygen MAP had much lower bacterial counts, with levels below 4.2 log of cfu/[cm.sup.2], even after 7 d of retail display. Oxidation values for the TB were extremely high (ranging from 12.3 to 26.6), whereas the BF and RF had values that were much lower ( Key words: enhancement, modified-atmosphere packaging, retail display, shelf life

The objective of this study was to evaluate the tenderness of beef chuck and round muscles when enhanced with ammonium hydroxide and salt at different pump levels. A randomized, complete block design of 4 treatments and 3 muscles with 3 replications was used, with a total of 15 subprimals per treatment. Treatments included a 0% (CON), 15% (T15), 22.5% (T22), and 30% (T30) target pump. The triceps brachii (TB), biceps femoris (BF), and rectus femoris (RF) muscles were studied. Muscles were injected with a solution of ammonium hydroxide and sodium chloride (patent-pending technology from Freezing Machines Inc., Dakota Dunes, SD). Individual steaks were cut to a thickness of 2.54 cm, vacuum-packaged in trays, and frozen. Warner-Bratzler shear force, pH, and sensory evaluations were determined. Shear force decreased as the target pump percentage increased for all muscles (P < 0.050): TB = 39.9, 35.1, 32.1, and 27.0 N; BF = 39.4, 26.2, 23.3, and 19.3 N; RF = 42.7, 32.9, 30.7, and 28.9 N for CON, T15, T22, and T30, respectively. In all cases, there were no shear force differences between T15 and T22 (P > 0.050). As percentage pump increased, pH increased. The ultimate pH was moderately strongly to strongly related to shear force (r = 0.55, 0.70, and 0.80 for RF, TB, and BF, respectively). Trained taste panel ratings revealed an increase in tenderness, decrease in connective tissue, and an increase in juiciness as pump level increased for all muscles. In all cases but one (juiciness of the RF), the CON had the least desirable ratings and shear force values (P < 0.050). There were no major differences between T15 and T22, and T30 steaks tended to have an uncharacteristic soft and mushy texture. For this reason a 20% target pump level was determined to be the optimum pump level. These data suggest that adjusting pH in beef with ammonium hydroxide and salt can increase tenderness in muscles from the beef chuck and round. Any level of treatment was beneficial, with the greatest shear force benefit occurring in muscle pumped to 30%. Key words: ammonium hydroxide, beef, enhancement, tenderness

Beef knuckles (n = 160) were obtained from source-verified cattle finished on 30% wet distillers grains plus solubles enriched with varying levels of alfalfa hay (4 or 8%), corn silage (6 or 12%), or corn stalks (3 or 6%) based on NDF. Proximate analysis, pH, oxidation-reduction potential, fatty acid composition, and sensory analysis were conducted on the rectus femoris muscle to determine if roughage inclusion, in conjunction with wet distillers grains plus solubles and cattle source, affects beef flavor with particular interest in liver-like off-flavor. Proximate analysis, fat content, and oxidation-reduction potential were unaffected (P > 0.129) by diet or source. For s.c. adipose tissue, cattle from Nebraska (NE) had greater amounts of MUFA (P = 0.048) and unsaturated fatty acids (P = 0.068) but less SFA (P = 0.065) when compared with cattle from South Dakota. Diet affected s.c. adipose tissue levels of 15:0, 17:0, and n-3 fatty acids in which cattle from NE finished on the low corn stalk diet had (P [less than or equal to] 0.050) lower levels. Cattle from NE had (P [less than or equal to] 0.049) greater i.m. adipose proportions of 13:0 and CLA. Dietary effects (P [less than or equal to] 0.050) were observed for i.m. adipose tissue proportions of 16:0, 18:1(n-9), 18:2(n-6), 20:4(n-6), 22:5(n-3), MUFA, PUFA, and n-6 fatty acids. Sensory analysis revealed that cattle from NE were (P [less than or equal to] 0.023) less juicy and had less bloody notes when compared with cattle from South Dakota. Cattle finished on the low alfalfa diet were (P [less than or equal to] 0.014) more tender and juicy but had more bloody notes. No (P [greater than or equal to] 0.670) dietary or source effects were noted for liver-like off-flavor. Subcutaneous amounts of 18:2(n-6 trans) (r = -0.17) were inversely related to the incidence of liver-like off-flavor, whereas 20:1(n-9) (r = 0.21), CLA cis-9, trans-11 (r = 0.16) were directly related. Data from this study indicate that type and level of roughage inclusion and cattle source have minimal effects on fatty acid profiles and sensory properties of the musculus rectus femoris. However, individual fatty acids of s.c. and i.m. adipose tissue were significantly correlated with liver-like off-flavor. Key words: beef, fatty acid, flavor, liver-like, knuckle, source-verified

Beef knuckles (n = 60) were chosen from a population of 328 knuckles to test a selection procedure and determine the potential causes of liver-like off-flavor. In phase I, 2 independent panelists were allowed to smell the aromas or smell and taste samples of cooked beef to determine the presence or absence of the liver-like off-flavor and off-flavor intensity. The panelists tested knuckles from 5 feedlots, but only identified 29 as having an off-flavor. A kappa statistic was generated to assess the level of agreement of the 2 panelists that indicated the panelists moderately or substantially agreed when judgments were based on smell exclusively or smelling and tasting, respectively. Although the agreement was acceptable ([kappa] = 0.57 and 0.76), there was not enough variation in the liver-like off-flavor and off-flavor intensity for the 2 panelists to detect differences compared with an independent sensory panel. Phase II identified factors that led to the development of the liver-like off-flavor in beef. The M. rectus femoris from knuckles identified from phase I were used. Sensory analysis, proximate composition, heme iron, mineral content, and fatty acid analyses were conducted. Stepwise regression was used to identify factors contributing to the liver-like off-flavor. Specifically, Na, 16:1, cis 18:1(n-7), 20:2(n-6), and 20:3(n6) fatty acids explained (P = 0.021) 46% of the variation of the liver-like off-flavor. Although previously reported as playing a role in the development of the liver-like off-flavor, iron, heme iron, and pH had no effect in this study. Key words: beef, fatty acid, flavor, liver-like, knuckle

The objective of this study was to benchmark carcasses and muscles from commercially identified fed (animals that were perceived to have been fed an increased plane of nutrition before slaughter) and nonfed cull beef and dairy cows and A-maturity, USDA Select steers, so that the muscles could be identified from cull cow carcasses that may be used to fill a void of intermediately priced beef steaks. Carcass characteristics were measured at 24 h postmortem for 75 carcasses from 5 populations consisting of cull beef cows commercially identified as fed (B-F, n = 15); cull beef cows commercially identified as nonfed (B-NF, n = 15); cull dairy cows commercially identified as fed (D-F, n = 15); cull dairy cows commercially identified as nonfed (D-NF, n = 15); and A-maturity, USDA Select grade steers (SEL, n = 15). Nine muscles were excised from each carcass [m. infraspinatus, m. triceps brachii (lateral and long heads), m. teres major, m. longissimus dorsi (also termed LM), m. psoas major, m. gluteus medius, m. rectus femoris, and m. tensor fasciae latae] and subjected to Warner-Bratzler shear force testing and objective sensory panel evaluation after 14 d of postmortem aging. Carcass characteristics differed (P < 0.05) among the 5 commercially identified slaughter groups for the traits of lean maturity, bone maturity, muscle score, HCW, fat color, subjective lean color, marbling, ribeye area, 12th-rib fat thickness, and preliminary yield grade. Carcasses from commercially identified, fed cull cows exhibited more (P < 0.01) weight in carcass lean than did commercially identified, nonfed cull cows. There was a group x muscle interaction (P = 0.02) for Warner-Bratzler shear force. Warner-Bratzler shear force and sensory overall tenderness values demonstrates that muscles from the SEL group were the most tender (P < 0.01), whereas muscles from the BNF group were the least tender (P < 0.01). Sensory, beef flavor intensity was similar (P > 0.20) among cull cow carcass groups and more intense (P < 0.01) than the SEL carcass group. Muscles from the SEL group exhibited less (P < 0.01) detectable off-flavor than the cull cow carcass groups, whereas the B-NF group exhibited the most (P < 0.01) detectable off-flavor. Although carcass and muscle quality from commercially identified, fed, cull beef and dairy cows was not similar to Amaturity, USDA Select beef, they did show improvements when compared with nonfed, cull, beef and dairy cow carcasses and muscles. Key words: cull cow, benchmarking, Warner-Bratzler, muscle

A 2-yr experiment was conducted to compare carcass characteristics and meat palatability attributes of steers (3/4 British, 1/4 Continental) finished postweaning as calves or yearlings. Calves and yearlings of the same contemporary group were designated to a finishing system at weaning. Calves (n = 73) were finished in the feedlot (191 d) on a high-concentrate diet. Yearlings (n = 84) grazed crop residues after weaning, followed by spring and summer pasture grazing, and concluded with a short finishing period (91 d) in the feedlot. All steers were fed to a constant, fat thickness endpoint of I cm. The M. longissimus lumborum steaks from each production system were aged for 7, 14, or 21 d for Warner-Bratzler shear force determination and for 7 or 14 d for in-house sensory panel evaluation. Insoluble, percent soluble, and total collagen were determined. Yearlings produced heavier (P < 0.001) carcasses with larger (P < 0.001) LM areas and lower (P < 0.001) marbling scores and quality grades. Calves possessed greater amounts of total collagen (P < 0.001), with a significantly greater percentage of soluble collagen compared with yearlings (39.72 vs. 24.38%). Calves produced steaks with lower (P < 0.001) shear force values and greater (P < 0.001) sensory ratings for flavor. The USDA Choice steaks from the calves were more (P < 0.001) tender and more (P < 0.050) palatable than Choice steaks from yearlings, and USDA Select steaks from calves were rated more tender (P < 0.001), juicy (P = 0.012), and desirable (P < 0.001) than Select steaks from yearlings. As expected, increasing aging time from 7- to 14- to 21-d produced steaks with lower (P < 0.001) shear force values, regardless of the production system. Risk probabilities showed 1.24% of the steaks from calf-finished steers and 21.22% of steaks from yearling-finished steers to be tough. Sensory rating probabilities showed the steaks from the calves were most likely to be desirable for tenderness, whereas steaks from the yearlings were most likely to be undesirable for tenderness, juiciness, flavor, and overall acceptability. Thus, calf-finished steers produce carcasses superior in quality and palatability compared with those from yearling-finished steers. However, yearling-finished steers can produce tender beef with extended aging. Key words: beef, production system, meat quality, collagen

This research compared off-flavor notes and the relationship of pH and heme-iron content to off-flavor for different beef muscles. After grading, knuckles and shoulder clods were removed from 16 USDA Choice and 14 USDA Select beef carcasses, vacuum-packaged, and aged for 7 d. The rectus femoris (REC), vastus medalis (VAM), vastus lateralis (VAL), teres major (TER), infraspinatus (INF), and triceps brachii-long head (TRI) were separated, cut into steaks, and frozen (-16[degrees]C). Sensory analysis was conducted using a trained taste panel, with steaks grilled to an internal temperature of 65[degrees]C. Heme-iron concentration and pH were determined. The INF had lower (P < 0.05) off-flavor intensity ratings and less frequent sour flavor than the other muscles, and the VAL had the most intense (P < 0.05) off-flavor ratings and among the greatest frequency of sour, charred, and oxidized flavors. The frequencies of liver-like, bloody, and rancid flavors were not affected by muscle type. Heme-iron concentration did not differ among muscles. Three USDA Select carcasses had intense off-flavor in the muscles. Liver-like flavor was highly negatively correlated with off-flavor intensity for each of the muscles tested. Muscles rated a 5 or below (on an 8-point rating scale, where 1 = extremely intense off-flavor and 8 = no off-flavor) in off-flavor intensity and identified as liver-like by 30% or more of the panelists were grouped together and compared to normal muscles. Those in the liver-flavored group were less frequently identified as charred, probably because the liver-like flavor was so intense. There were no differences between the 2 groups for sour, metallic, bloody, oxidized, or fatty off-flavor notes. Regression equations containing the linear and quadratic functions of heme-iron concentration, muscle pH, and their interaction were established for the frequency of off-flavor notes within each muscle. The REC, TER, VAL, and VAM showed a relationship between pH, heme iron, and off-flavor intensity (P < 0.05). Liver-like flavor was explained partially by pH and heme iron in the REC, VAM, and VAL ([R.sup.2] = 0.45 to 0.55; P < 0.05). Few other significant relationships were found. Heme iron and pH were unrelated to metallic, oxidized, or rancid flavors for any of the muscles tested. These data suggest that liver-like off-flavors are specific to individual animals, and that pH and heme iron are not strongly related to off-flavor notes. Key words: beef, flavor, pH, heme-iron concentration

To determine US consumer acceptance and value of beef from various countries, 24 taste panels of consumers (n = 273 consumers) were conducted in Denver and Chicago. Two pairs of strip steaks were evaluated for flavor, juiciness, tenderness, and overall acceptability on eight-point hedonic scales. One pair consisted of an Australian grass-fed strip steak and a domestic strip steak, whereas the other pair included Canadian and domestic strip steaks. The pairs were matched to similar Warner-Bratzler shear values and marbling scores to decrease variation associated with tenderness and juiciness. A variation of the Vickery auction was used to obtain silent, sealed bids on steaks (0.45 kg) from the same strip loins sampled in the taste panel. Consumers gave higher (P < 0.001) scores for flavor, juiciness, tenderness, and overall acceptability for domestic steaks compared with Australian grass-fed steaks. Domestic steaks averaged $3.68/0.45 kg, whereas consumers placed an average value of $2.48/ 0.45 kg on Australian grass-fed steaks (P < 0.001). Consumers rated Canadian steaks numerically lower for juiciness (P = 0.09) and lower (P < 0.005) for flavor, tenderness, and overall acceptability than domestic samples. Consumers placed an average value of $3.95/ 0.45 kg for domestic steaks and $3.57/0.45 kg for Canadian steaks (P < 0.01). Consumers (19.0%) who preferred Australian grass-fed steaks over domestic steaks paid $1.38/0.45 kg more (P < 0.001), whereas consumers (29.3%) who favored the Canadian steaks over the domestic steaks paid $1.37/0.45 kg more (P < 0.001) for the Canadian steaks. A majority of US consumers seem to be accustomed to the taste of domestic beef and prefer domestic steaks to beef from Australia grass-fed and Canadian beef. Key Words: Beef, Country of Origin, Grain-Fed, Grass-Fed, Palatability

To determine consumer sensory acceptance and value of beef steaks differing in marbling level (high = upper 2/3 USDA Choice and low = USDA Select), but similar in Warner-Bratzler shear value, consumers in Chicago and San Francisco (n = 124 per city) evaluated two matched pairs of high- and low-marbled strip steaks, and had the opportunity to participate in a silent, sealed-bid auction to purchase steaks from the same strip loins as the samples. Consumers who purchased steaks also evaluated the steaks when prepared in their homes. Based on overall acceptability ratings, consumers were categorized into three groups: 1) those who consistently found high marbling more acceptable, 2) those who consistently found low marbling more acceptable, and 3) those who were indifferent. Consumers who evaluated at least one high-marbled and one low-marbled sample in their home were included in an evaluation environment analysis (n = 50). High-marbled steaks were rated higher (P < 0.01) in juiciness, flavor, and overall acceptability than low marbled steaks. In Chicago, consumers tended to bid more (P < 0.10) for high-marbled steaks, whereas consumers in San Francisco did not. Consumers who found high-marbled steaks more acceptable and those who found low-marbled steaks more acceptable were willing to pay more (P < 0.01) for the more acceptable product. Consumers who evaluated high- and low-marbled samples in both the laboratory and home environments rated high- and low-marbled samples similar (P > 0.10) in flavor, juiciness, tenderness and overall acceptability when evaluating the steaks in their homes. In addition, these consumers were willing to pay similar (P > 0.10) amounts for high- and low-marbled samples in both environments. Overall, consumers found high-marbled steaks to be more acceptable than low-marbled steaks in flavor and overall acceptability when tenderness differences were minimized in the laboratory environment. Consumers were willing to pay more for their preference, whether that preference was for high-marbled or low-marbled steaks. Key Words: Beef Quality, Consumer Panels, Consumer Prices

To determine consumer sensory acceptance and value of branded, Argentine (grass-finished, aged 30+ d) and domestic (U.S. grain-finished beef, aged 9 d) strip loins were paired based on similar Warner-Bratzler shear force values (P = 0.34) and similar marbling levels (P = 0.82). Consumers in Chicago, IL, and San Francisco, CA (n = 124 per city), evaluated one pair of Argentine and domestic steaks, and had the opportunity to participate in a silent, sealed-bid auction to purchase steaks matching the taste panel samples. Consumers were categorized into three groups based on overall acceptability ratings: 1) those who found Argentine steaks more acceptable, 2) those who found domestic steaks more acceptable, and 3) those who were indifferent. Consumers rated domestic steaks higher (P < 0.05) in juiciness, tenderness, flavor, and overall acceptability. Consumers in both Chicago and San Francisco were willing to pay more (P < 0.05) for domestic steaks ($0.86 and $0.52 per 0.45 kg, respectively). In both cities, consumers who found Argentine samples more acceptable were willing to pay more (P < 0.05) for Argentine steaks ($0.74 per 0.45 kg in Chicago and $1.82 per 0.45 kg in San Francisco), and consumers who found domestic samples more acceptable were willing to pay more (P < 0.05) for domestic steaks ($1.66 per 0.45 kg in Chicago and $1.34 per 0.45 kg in San Francisco). Consumers who were indifferent were willing to pay similar (P = 0.99) amounts for Argentine and domestic steaks. Although some consumers found Argentine beef more acceptable than domestic beef (19.7 and 16.5% in Chicago and San Francisco, respectively) and were willing to pay more for it, most consumers found domestic beef to be more acceptable (59.0% in Chicago and 61.5% in San Francisco) and were willing to pay more to obtain a more acceptable product. Key Words: Beef Quality, Consumer Panels, Consumer Prices

To determine visual preference and value for fresh beef steaks differing in marbling level and color, consumers in Chicago and San Francisco (n = 124 per city) evaluated two pairs of steaks in a retail case. Steaks differing in marbling level (Modest/ Moderate vs. Slight) and color (bright, cherry-red vs. dark red t were purchased at retail stores in each city. Consumers selected their preferred steak in each pair, described their selection criteria, and provided the price they were willing to pay for each of the four steaks. There was a difference in visual preference in each city, with most consumers preferring (P < 0.01) low (Slight) over high (Moderate/Modest) marbling; however, more (P < 0.01) consumers in Chicago (86.7%) preferred low marbling than in San Francisco (67.0%). Selection criteria were categorized into five groups: marbling, fat, color, appearance, and palatability. Marbling was mentioned by 65.4% of consumers who preferred high marbling, whereas 64.9% of consumers who preferred low marbling mentioned fat as a selection criterion. Bright, cherry-red color was preferred by a higher (P < 0.01) percentage of consumers in both Chicago and San Francisco (67.6 and 76.5%, respectively). Color was mentioned both by consumers who preferred bright, cherry-red color (64.8%) and those who preferred dark red color (63.9%). All preference groups were willing to pay more for their preferred steak (P < 0.01), but consumers who preferred low marbling were willing to pay more (P < 0.01) for their preferred steak than consumers who preferred high marbling. Consumers who preferred bright, cherry-red color were willing to pay more (P < 0.01) for their preferred steak than consumers who preferred dark red color. Consumers who preferred low marbling seemed to desire lean products, and consumers who preferred high marbling seemed to desire products with high eating quality. In this study, consumers were willing to pay more to purchase their preferred product; however, most consumers preferred low marbling and bright, cherry-red color. Key Words: Beef, Consumer Preferences, Market Research

The objective of this experiment was to determine the effect of prerigor injection of several glycolytic inhibitors on pH, color, tenderness, and related traits of low-value beef cuts. The semimembranosus, triceps brachii, and supraspinatus muscles from each of 10 steer carcasses were removed 1 h postmortem. Control samples remained in the carcass at 2[degrees]C for 24 h. Prerigor muscles were injected and tumbled with 10% (by weight) of one of four solutions: sodium citrate (NaC; 200 mM), sodium fluoride (NaF; 200 mM), sodium acetate (NAA; 200 mM), and calcium chloride (Ca[Cl.sub.2]; 300 mM). All muscles treated with NaC and NaF showed the highest pH and glycogen content (P < 0.05), indicating that glycolysis was inhibited. Injection of NaC in semimembranosus and supraspinatus produced the tenderest meat (P < 0.05), showing a greater increase in tenderization at 3 d than at 7 d postmortem. Treatment did not affect color or oxidation-reduction potential, but all treated muscles tended to be more oxidative (higher oxidation-reduction potential). Sodium citrate was identified as a potential compound to enhance tenderness of prerigor muscle without altering color. Further studies are required to investigate its effect on palatability traits and to provide a basis for commercial application of the process. Key Words: Beef, Glycolysis, Inhibitors, Tenderness

Thirty-eight muscles of the beef chuck and round were histochemically stained to characterize fiber-type composition in order to facilitate optimal muscle use in value-added products. Select-grade chucks and rounds (n = 4 each) were chosen to represent two carcass weight classes (250 to 295 kg and 363 to 410 kg) and two yield grades (1 and 3). Muscles were sectioned and stained with a procedure that included a succinate dehydrogenase and an adenosine triphosphatase staining technique. Number and diameter of [beta]-red, [alpha]-red, and [alpha]-white muscle fibers were used to determine muscle fiber percentage, muscle fiber area, and percent area in each muscle. Weight did not significantly (P > 0.05) affect these muscle fiber-type characteristics, probably because of limited sample numbers. Muscles containing greater than 40% [beta]-red fibers were classified as red; greater than 40% [alpha]-white fibers were classified as white. All other muscles were classified as intermediate. Nine of 12 round muscles were white, including semitendinosus, biceps femoris, rectus femoris, adductor, and semimembranosus. The chuck muscles were red (10 of 26), intermediate (9 of 26), and white (7 of 26). These data indicate variable fiber-type composition of most of the muscles of the beef chuck and round. Functional and biochemical traits of each muscle fiber class would be expected to create different processing characteristics, which would influence optimal muscle use in value-added products. Key Words: Beef, Meat, Skeletal Muscle

To evaluate the effect of orientation of hams during electromagnetic scanning on the estimation of dissected lean content, hams were scanned horizontally, posterior first (POS) or dorsal first (DOR), and vertically, medial side (aitchbone) first (MED; standing on the butt face). Weight and percentage of dissected lean were estimated using scan peak for each orientation, ham weight, and fat thickness. The mean scan peak for the MED orientation was approximately twice as great as peaks for the POS and DOR orientations, which suggests that this orientation may offer greater predictive accuracy by reducing the signal to noise ratio. Results, however, indicated that all orientations were equally effective at predicting lean weight and percentage, with [R.sup.2] values of .95 and .75 and root mean square errors of .21 kg and 2.6%, respectively. Key Words: Pork, Composition, Electrical Conductivity, Electromagnetic Field

Carcasses (n = 265) selected to differ in USDA yield grade were evaluated by expert graders and assessed for tenderness with the Tendertec Mark III Beef Grading Instrument. Tendertec measurements were collected on longissimus lumborum muscles in both sides of each carcass. During fabrication of each left carcass side, a rib section (later converted into three steaks) was removed for aging and subsequent sensory panel evaluation at 14 d and for Warner-Bratzler shear force measurements at 14 and 28 d. Correlation coefficients for repeatability of Tendertec output variables, between left and right carcass sides, were .57, .44, .70, and .65 for Area-2, Area-2B, Power-2, and Power-2B, respectively. Correlations between Tendertec output variables and Warner-Bratzler shear force evaluations performed on steaks aged 14 or 28 d were not different from zero. Sensory panel ratings for amount of connective tissue were correlated (P < .01) with Tendertec output variables Area-2 and Area-2B (r = -.168 and -.154, respectively), and ratings for overall tenderness were correlated (P < .05) with the Area-2 output variable (r = -.131) but the coefficients were very low. Segregation analysis, using Tendertec output variables Area-2 and Power-2, significantly (P < .05) stratified sensory panel ratings for connective tissue amount and overall tenderness. Even though the Tendertec probe detected some differences in connective tissue contributions to rib steak tenderness, it was not better than USDA quality grade at segmenting A-maturity carcasses into anticipated tenderness outcomes, and thus its applicability as a grading instrument may be limited to use on more mature beef carcasses. Key Words: Quality Grading, Tenderness, Probes, Palatability

Six Angus bulls with HIGH (>.4) and six bulls with LOW ( .18). More (P < .05) carcasses of calves from sires with HIGH EPD for marbling graded USDA Choice than from LOW EPD sires, 74% vs 47%, respectively. Angus sires can be selected to produce progeny that have increased ability to grade Choice without increasing yield grade or decreasing animal growth or feed efficiency. Key Words: Beef, Marbling, Expected Progeny Differences

A 2-yr study was conducted to determine the effect of EPD for marbling on marbling score, palatability traits, and carcass fatness in beef. Steer (n = 122) and heifer (n = 123) carcasses were obtained by mating Angus bulls having a high (>.4) or low ( Key Words: Beef, Marbling, Expected Progeny Differences

Restriction fragment length polymorphisms (RFLP) have been identified at the bovine calpastatin locus. The objective of the present study was to determine whether these polymorphisms are related to variations in calpastatin activity or beef tenderness in unrelated animals of mixed breeding. A sample of 83 crossbred steers from sires representing 'eight different breeds was examined to determine this relationship. A 2.2-kb cDNA coding for domains 2 through 4 plus a 3[prime] untranslated region of bovine skeletal muscle calpastatin was used as a probe for calpastatin RFLP. Polymorphisms were found using the restriction enzymes BamHI and EcoRI. Polymorphic restriction fragments for BamHI were 9.0 and 5.0 kb and for EcoRI were 6.0 and 4.0 kb. Allelic frequencies for BamHI restriction fragments were .53 for the 9.0-kb allele and .47 for the 5.0-kb allele. Allelic frequencies for EcoRI restriction fragments were .43 for the 6.0-kb allele and .57 for the 4.0-kb allele. No polymorphisms were identified using the restriction enzymes BglII, DraI, or PstI. No associations between EcoRI and BamHI RFLP and 24-h calpastatin activity or Warner-Bratzler shear force at 14 d postmortem were detected. Therefore, the polymorphic EcoRI and BamHI restriction sites within the bovine calpastatin locus do not detect DNA sequence differences responsible for variation in calpastatin activity or tenderness of aged beef. Therefore, these polymorphisms cannot be used to predict tenderness of aged beef from unrelated animals of mixed breeding. These results do not exclude the possibility that other DNA sequences in or near the bovine calpastatin gene are responsible for variation in calpastatin activity or meat tenderness. The lack of a relationship between these calpastatin RFLP and meat tenderness must be distinguished from the well-documented relationship between calpastatin activity and meat tenderness. Therefore, further development of calpastatin-based methods for predicting beef tenderness in unrelated animals of mixed breeding should focus on basic factors influencing calpastatin activity at the molecular and cellular level. Key Words: Calpastatin, RFLP, Beef, Tenderness

To study the use of electromagnetic scanning in prediction of lean content in beef carcasses and cuts, 100 beef cattle (60 steers and 40 heifers), representing a broad range in external fat thickness (.1 to 2.9 cm) and live weight (414 to 742 kg), were selected. Chilled right sides were divided into streamlined (foreshank, brisket, and ventral plate removed) forequarters (FQ) and full hindquarters (HQ) and scanned. Primal rounds, loins, ribs, and chucks were fabricated from the right side, scanned, and physically separated into lean, fat, and bone. Prediction equations for dissected lean content and percentage of lean included the peak of the electromagnetic scan response curve (obtained from scanning the HQ or FQ), length, temperature and weight of the scanned cut, and fat thickness at the 12th rib. Using the coefficient of determination, root mean square error, and Mallows' Cp statistic, the best model for each dependent variable (weight and percentage of lean) that included up to five independent variables was selected. Prediction equations for the HQ or FQ of steers accounted for 84 to 93% of the variation in lean weight of beef sides and quarters and 71 to 93% of primals. Sixty-one to 75% of the variation in percentage of lean in sides and quarters and 48 to 65% of primals was also explained. Similar results were obtained for heifer carcasses. Predicting percentage of lean in any scanned cut, rather than weight of lean, accounted for less of the variation. Weight and fat thickness contributed significantly when predicting percentage of lean. These data indicate that electromagnetic scanning is capable of objectively measuring lean content in beef quarters and primals.

Forty-eight crossbred rabbits were used in three replications of a 2 x 4 factorial arrangement to investigate the short-term responses of tissue accretion, calpains and calpastatin activity, and nucleic acid and protein concentrations to [Beta]-adrenergic agonist (BAA) feeding. Rabbits were fed a 17% CP diet with or without 7 ppm of [L.sub.644,969] and slaughtered after 1, 4, 8, or 16 d of treatment. Empty body dressing percentage and biceps femoris weight (as a percentage of empty body weight [EBW]) were significantly higher in the treated rabbits than in the controls after 16 d of treatment. Heart and liver weights (as a percentage of EBW) were higher (P [is less than] .05) after 1 d and liver weight (as a percentage of EBW) was lower (P [is less than] .05) after 16 d in treated vs controls. Except for an elevation of skeletal muscle m- calpain after 16 d, BAA-supplementation did not affect the calpain- calpastatin system. Muscle RNA concentrations and RNA:DNA ratios were higher (P [is less than] .05) in treated rabbits after 1 d and remained higher thereafter. Protein:RNA ratios were lower (P [is less than] .01) in treated than in control rabbits after 4 d and remained lower throughout the trial. Muscle DNA content was lower after 4 d and higher after 16 d; RNA content was higher after 4, 8, and 16 d; and protein content was higher after 16 d in treated vs control rabbits. Liver nucleic acid and protein concentrations were not affected by BAA treatment. Heart RNA:DNA ratios were higher (P [is less than] .01) after 1 d and protein:RNA ratios were lower (P [is less than] .05) after 4 d in the treated rabbits than in the controls. Collectively, these data imply that BAA-induced muscle growth in rabbits occurs through hyperplasia and seems to be related to elevated protein synthetic capacity.

Studies were conducted to prepare and characterize meat batters, using three fat levels of 8%, 16% and 24%, and five modified connective tissue, MCT, levels of 0%, 10%, 20%, 30% and 40%, in a 3 times 5 complete factorial design. Batter pH, emulsification temperature rise, batter extrusion values and collagen levels were enhanced by rising levels of MCT, and thermal processing yield losses decreased. Effective addition of MCT to reduce losses in low-fat meat batters was achieved without significant alterations in batter stability.

Broiler chicken carcass characteristics, muscle fiber size, muscle composition, catheptic enzyme activity and tenderness were examined with respect to their response time to cimaterol. Cimaterol is a beta-adrenergic agonist which is known to decrease fat accumulation and enhance protein accretion in sheep, swine and poultry. The results showed that muscle tenderness differences began to be noted in thigh muscle and in breast muscle after four days and eight days, respectively, of cimaterol diet. Cimaterol may mediate its effects by decreasing the degradation of skeletal muscle proteins.

A newly developed procedure uses fluorescein isothiocyanate-labeled casein substrate to measure the activity of calpain in cell extracts or biopsy-sized samples. This technique is five times more sensitive than the standard technique. This method helps understand the activities of calpain enzymes and calpastatin in meat tenderization and postmortem myofibrillar protein degradation.