Search

With the increasing research on giant dielectric materials, there is growing interest in the development of switching materials with giant dielectric properties. In this study, a novel organic–inorganic hybrid material (Et3NC2H4Br)FeCl4 was synthesized. It was characterized through differential scanning calorimetry (DSC) and in situ temperature-dependent powder X-ray diffraction (PXRD), which determined its phase transition temperature (TC) to be 362 K. Temperature-dependent dielectric measurements revealed that the material exhibited switchable dielectric properties, with the real part of the dielectric constant exceeding 106 at 500 Hz and a dielectric switching ratio surpassing 103. The ratio refers to the ratio between the high dielectric state and the low dielectric state of a step-like dielectric anomaly. Single-crystal X-ray diffraction (SCXRD) analysis confirmed that the material crystallized in the P21/c space group with a zero-dimensional structure. The optical bandgap, determined through UV-visible spectroscopy, was calculated to be 2.62 eV. Additionally, analysis using Hirshfeld surfaces and 2D fingerprint plots revealed that the predominant intermolecular interactions are H⋯Cl and H⋯H interactions. This study is anticipated to provide insights and hope for the design and application of high-temperature giant dielectric switching materials. [ABSTRACT FROM AUTHOR]

The impact of molecular point groups on phase transition materials has been seldom discussed. Two organic cations with different symmetries were incorporated into a [SnCl6]2− framework. By breaking the symmetry of cations, a novel hybrid material with two successive phase transitions featuring a rare "on–off–on" nonlinear optical switch was obtained. [ABSTRACT FROM AUTHOR]

Organic–inorganic hybrid perovskite materials have garnered considerable interest due to their potential in optoelectronic applications. Herein, we assemble a novel one-dimensional organic–inorganic hybrid perovskite from the organic cation with trans-configuration, (trans-4-methylcyclohexylammonium)CdCl3 (compound 1), which undergoes successive high-temperature structural phase transitions accompanied by dual switchable dielectric anomalies. The variable-temperature structural analyses indicate that the phase transition from the triclinic P1¯ to the monoclinic space group P21/c at 385 K is driven by the swinging motion of half organic cations, while the subsequent transition to the orthorhombic space group Cmcm at 436 K is attributed to the order–disorder transformation of all organic cations. Moreover, compound 1 exhibits semiconducting characteristics and blue light emission with a remarkably long lifetime of 9.94 ns. These findings are poised to inspire the design of novel multifunctional hybrid perovskites with superior performance. [ABSTRACT FROM AUTHOR]

In recent years, phase change materials (PCMs) have received extensive attention because of their applications in many fields, such as construction, semiconductor, energy and intelligent response switch. Organic‐inorganic hybrid materials (OIHMs) are wide applied in the preparation of PCMs due to their controllability of organic and inorganic components. In this study, we successfully synthesized an organic‐inorganic hybrid material (BTTD)MnCl4 (compound 1, BTTD=[(CH3)2NCH2Cl(CH2)3CH2ClN(CH3)2]. The purity of compound 1 was confirmed by PXRD. The crystal structure of compound 1 was analyzed at 300 K, 381 K and 400 K. The three different crystal structures prove the phase change of compound 1. According to the result of differential scanning calorimeter (DSC), the phase transition of compound 1 is reversible. Moreover, the measured bandgap (Eg) of 1 is 2.25 eV. The dielectric constant of compound 1 fluctuates near 370 K, indicating the changes of electrical properties, so compound 1 can be used to cut off circuit. This temperature is close to the boiling point of water under standard ambient conditions. Therefore, this work provides a new direction for the design of intelligent response switch for electric kettle. [ABSTRACT FROM AUTHOR]

Crystal phase transformation is often accompanied by changes in corresponding physical properties. For instance, dielectric properties may undergo abrupt changes near the phase-transition temperatures. Currently, designing and synthesizing organic–inorganic hybrid materials with significant dielectric changes remains a field worth exploring. In this study, the compound [N(Et)3CH2Cl]2[MnCl4] (compound 1) was synthesized and characterized. The compound exhibited a reversible phase transition at 320 K, and dielectric permittivity anomalies were found near the phase-transition temperature. The observed changes in the space group from P1¯ (2) at LTP (below the phase-transition temperature) to P42/nmc (137) at HTP (above the phase-transition temperature) also proved an order–disorder phase transition. Significantly, compound 1 was green, and strong emission at 520 nm could be observed under ultraviolet excitation, which can be attributed to the d–d transition of the spin–orbital prohibition produced by the cations. Both dielectric and fluorescence properties of compound 1 may find applications in the fields of switchable, dielectric, and luminescent materials. [ABSTRACT FROM AUTHOR]

Phase change materials (PCMs) have drawn increasing attention for their promising applications in thermal switches, data communication, and energy storage. Because of the complexity of the interactions between molecules, it is still a challenge to design PCMs with a desired high phase transition temperature (Tc). In this study, a one-dimensional hybrid perovskite of (TEACCl)PbBr3 (1, TEACCl = Et3NCH2Cl) was successfully designed and synthesized with a Tc = 390 K. Disordering of TEACCl+ on the heating process is the origin of the structural phase transition of 1 from the P21/c to P63/mmc structure. It is noted that the phase transition is associated with an excellent switchable dielectric property, which indicates that 1 has the potential to be applied to sensor equipment. After calculation, 1 is an infrequent indirect bandgap semiconductor with an energy gap of 3.57 eV. Moreover, 1 exhibits strong red fluorescence under irradiation of UV light. This work will provide guidance for designing high Tc switching materials. [ABSTRACT FROM AUTHOR]

Microwave‐assisted Fenton process over a high microwave‐responsive catalyst (Fe3O4−BiOCl) was developed. The morphology, composition and magnetic recovery of the prepared catalyst were analyzed. Correspondingly, the optimal reaction conditions were obtained and the catalyst had a good recovery performance. A good degradation result (COD removal efficiency=82.57 %, TOC removal efficiency=85.15 %, TN removal efficiency=80.86 %) was obtained with low energy consumption and chemical inputs, which proved that the system has a certain industrialization prospect. Furthermore, take p‐nitrophenol (PNP) as an example, The reaction mechanism of this process had been investigated. The reaction was divided into three stages: 1. Activation 2. Oxidation 3. Mineralization. In the Oxidation phase, the reaction followed zero‐order reaction kinetics model and the rate constant was 0.0642 mM s−1. To investigate the kinetics, a heterogeneous Fenton‐photocatalysis synergistic degradation mechanism based on experimental data was proposed. [ABSTRACT FROM AUTHOR]

The impact of molecular point groups on phase transition materials has been seldom discussed. Two organic cations with different symmetries were incorporated into a [SnCl 6 ] 2- framework. By breaking the symmetry of cations, a novel hybrid material with two successive phase transitions featuring a rare "on-off-on" nonlinear optical switch was obtained.