Search

In the last few years, an increasing interest has developed regarding the application of different techniques for the identification of pollutants inside the tissues deriving from patients affected by benign or neoplastic diseases. Particular attention was paid to neoplasia linked to particular exposures, e.g., heavy metals, carbon dusts, silica, asbestos. As regards the last pollutant, a wide body of scientific literature has been collected, considering the severe effects caused by mineral fibers on human health. Optical and electronic microscopies were widely applied to identify the fibers in respiratory and extra-respiratory organs to detect the minerals and to link their presence to an exposure source and to understand their role in cancer development. The main advantage of electron microscopy lies in the possibility of coupling the microscopes with energy dispersive spectrometers and also collecting data on the elemental composition of various inorganic phases. In term of sample preparation and time of analysis, the most utilized microscope technique is Scanning Electron Microscopy with an annexed energy dispersive spectrometer (SEM/EDS), allowing for the morphological and chemical characterization of the observed particles/fibers. Moreover, this technique is envisaged by Italian Law for asbestos identification in air and bulk samples. On the other hand, this technique does not allow a reliable identification of the mineral phase in the case of polymorphs with the same chemical formula but different crystal structures. In this work, the coupling of a spectroscopical technique—micro-Raman spectroscopy—to SEM/EDS is proposed for a sure phase identification of particles, showing EDS spectra with ambiguous phase identification, observed in samples of tissues from patients affected by colorectal cancer and living in an asbestos-polluted area. In these tissues, different particles with EDS spectra that do not allow a sure identification of the phase—in particular calcium-rich particles and titanium oxides—were successively analyzed by micro-Raman spectroscopy. Thanks to this last technique, it was possible to ascribe the mineral phases associated to these particles to "aragonite" (a calcium carbonate polymorph) and to "anatase" (a Ti dioxide polymorph). [ABSTRACT FROM AUTHOR]

Asbestos is a term that includes six fibrous mineral phases related to different lung diseases, including asbestosis, lung cancer, and Malignant Pleural Mesothelioma (MPM). Since the last century, these minerals have been widely studied under their mineralogical/chemical and physical aspects with in vivo and in vitro studies to understand the mechanisms of their carcinogenicity. There are several techniques described in the literature, as optical and electron microscopies, for the identification of coated (asbestos bodies, ABs) and uncoated fibers, but only micro-Raman spectroscopy permits a sure characterization of these minerals—and of the related phases—directly in the histological sections of pulmonary parenchyma without any manipulation. In this case, the risk of the loss of associated inorganic phases from asbestos bodies (ABs) and fibers (e.g.: iron or carbonaceous micro-particles) is avoided. Asbestos bodies are produced by the activity of alveolar macrophages with degradation/inactivation of asbestos fibers. Inside the alveolar macrophages, organic and inorganic material settles on the foreign fibers forming an iron-rich proteic and carbonaceous coating. In this study, Variable Pressure Scanning Electron Microscopy with annexed Electron Dispersive Spectroscopy (VP-SEM/EDS) and micro-Raman spectroscopy were applied to the characterization of the phases in the ABs. Characterization of carbonaceous materials (CMs), observed in pristine asbestos phases in previous works, was therefore performed, addressing the micro-Raman laser beam on different points of the asbestos bodies, and Raman mappings on ABs were carried out for the first time. Coupling the data obtained by VP-SEM/EDS and micro-Raman spectroscopy, it was possible to collect information about the iron and carbonaceous phases adhered to the fibers, probably lost during the classical tissue digestion procedures. Information about both mineral and carbonaceous components might be useful to understand the whole structure of "asbestos bodies" and the inflammogenic and carcinogenic effects of the asbestos phases coupled to CMs, that might derive from cigarette smoke or from environmental pollution; this study might be useful to deepen also the possible detrimental role of ABs in the tissues. [ABSTRACT FROM AUTHOR]

Plasma treatment has been used in recent years to activate the surfaces of adhesive substrates and thus as an adhesion promoter between adhesive and substrates. The use of plasma treatments is widely adopted in the automotive industries especially for polymers that present low surface energy, such as polypropylene. In this work, polypropylene substrates used in the automotive industries have been treated with two different techniques: vacuum and atmospheric plasma. Then, polyurethane and methacrylate adhesives have been used to bond single lap joints (SLJs). Typically, these two adhesives cannot bond polypropylene substrates without surface treatments. An experimental plan has been designed to investigate the process parameters that can increase the functional polar groups (FPGs) maximizing the adhesion strength. Besides the types of plasma, two different gas carriers (air and nitrogen) and different treatment times have been investigated. The substrates, treated and not treated, have been assessed through scanning electron microscopy, energy-dispersive X-ray analysis, and Fourier-transform infrared spectroscopy to quantitatively assess the increment of FPGs after the different treatments. The experimental plan shows that the atmospheric plasma can improve the surface of the substrates by using a smaller time. Mechanical tests on SLJs show that methacrylate and polyurethane cannot bond polypropylene substrates without the plasma treatment. On the other hand, the treated substrates can form a strong bonding with the adhesive since all SLJs exhibit a substrate failure. Mechanical tests have been also carried out after three different aging cycles showing that the adopted plasma treatment is not affected by the aging cycles. [ABSTRACT FROM AUTHOR]