Search

Francesca Bugli,1 Valeria Caprettini,2 Margherita Cacaci,1 Cecilia Martini,1 Francesco Paroni Sterbini,1 Riccardo Torelli,1 Stefano Della Longa,3 Massimiliano Papi,4 Valentina Palmieri,4 Bruno Giardina,5 Brunella Posteraro,1 Maurizio Sanguinetti,1 Alessandro Arcovito5 1Istituto di Microbiologia, Università Cattolica del Sacro Cuore, 2Dipartimento di Fisica, Sapienza Università di Roma, Rome, 3Dipartimento di Medicina Clinica, Sanità Pubblica, Scienze della Vita e dell’Ambiente, Università dell’Aquila, L’Aquila, 4Istituto di Fisica, 5Istituto di Biochimica e Biochimica Clinica, Università Cattolica del Sacro Cuore, Rome, Italy Abstract: In order to deliver low-cost viral capsomeres from a large amount of soluble viral VP6 protein from human rotavirus, we developed and optimized a biotechnological platform in Escherichia coli. Specifically, three different expression protocols were compared, differing in their genetic constructs, ie, a simple native histidine-tagged VP6 sequence, VP6 fused to thioredoxin, and VP6 obtained with the newly described small ubiquitin-like modifier (SUMO) fusion system. Our results demonstrate that the histidine-tagged protein does not escape the accumulation in the inclusion bodies, and that SUMO is largely superior to the thioredoxin-fusion tag in enhancing the expression and solubility of VP6 protein. Moreover, the VP6 protein produced according to the SUMO fusion tag displays well-known assembly properties, as observed in both transmission electron microscopy and atomic force microscopy images, giving rise to either VP6 trimers, 60 nm spherical virus-like particles, or nanotubes a few micron long. This different quaternary organization of VP6 shows a higher level of immunogenicity for the elongated structures with respect to the spheres or the protein trimers. Therefore, the expression and purification strategy presented here – providing a large amount of the viral capsid protein in the native form with relatively simple, rapid, and economical procedures – opens a new route toward large-scale production of a more efficient antigenic compound to be used as a vaccination tool or as an adjuvant, as well as represents a top-quality biomaterial to be further modified for biotechnological purposes. Keywords: Virus-like particles, protein-based nanotubes, SUMO fusion tag, human rotavirus vaccine

It is now established that the gastric pathogen Helicobacter pylori has the ability to form biofilms in vitro as well as on the human gastric mucosa. The aim of this study is to evaluate the antimicrobial effects of Clarithromycin on H. pylori biofilm and to enhance the effects of this antibiotic by combining it with Alginate Lyase, an enzyme degrading the polysaccharides present in the extracellular polymeric matrix forming the biofilm. We evaluated the Clarithromycin minimum inhibition concentration (MIC) on in vitro preformed biofilm of a H. pylori. Then the synergic effect of Clarithromycin and Alginate Lyase treatment has been quantified by using the Fractional Inhibitory Concentration index, measured by checkerboard microdilution assay. To clarify the mechanisms behind the effectiveness of this antibiofilm therapeutic combination, we used Atomic Force Microscopy to analyze modifications of bacterial morphology, percentage of bacillary or coccoid shaped bacteria cells and to quantify biofilm properties. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1584-1591, 2016 [ABSTRACT FROM AUTHOR]

Background/Objectives : The International Organization for Standardization (ISO) 20776-2:2021, which replaces ISO 20776-2:2007, focuses solely on the performance of antimicrobial susceptibility testing (AST) assays, emphasizing the ISO 20776-1 broth microdilution method as the reference standard. Consequently, categorical agreement (CA) and associated errors should not be applied. We verified the Vitek Reveal AST assay according to both ISO 20776-2:2021 and ISO 20776-2:2007 criteria. Methods : Samples from 100 simulated and clinical Gram-negative (GN) positive blood cultures (PBCs) were tested at a large teaching hospital. The simulated GN-PBCs were obtained from a hospital collection of isolates selected to represent diverse antimicrobial resistance profiles. The Reveal assay results were compared with those from the reference assay, and the time to result (TTR) for the Reveal assay was calculated. Results : The essential agreement rates were 96.1% (816/849) for simulated and 98.8% (929/940) for clinical GN-PBC samples. The bias values were -3.1 for simulated and -11.0 for clinical samples. The CA rates were 97.7% (808/827) for simulated and 99.2% (924/931) for clinical samples. The mean TTR ± SD (hours) for resistant organisms was significantly lower (4.40 ± 1.15) than that for susceptible, increased exposure (5.52 ± 0.48) and susceptible (5.54 ± 0.49) organisms. Conclusions : Our findings reinforce the potential of the Reveal assay as a valuable tool and support its implementation in clinical microbiology laboratories.

Background: Functionalized nanoparticles (NPs) represent a cutting edge in innovative clinical approaches, allowing for the delivery of selected compounds with higher specificity in a wider time frame. They also hold promise for novel theranostic applications that integrate both diagnostic and therapeutic functions. Pathogens are continuously evolving to try to escape the strategies designed to treat them. Objectives: In this work, we describe the development of a biotechnological device, Nano-Immuno-Probes (NIPs), for early detection and infections treatment. Human Herpes Simplex Virus 2 was chosen as model pathogen. Methods: NIPs consist of PLGA-PEG-Sulfone polymeric NPs conjugated to recombinant Fab antibody fragments targeting the viral glycoprotein G2. NIPs synthesis involved multiple steps and was validated through several techniques. Results: DLS analysis indicated an expected size increase with a good polydispersity index. Z-average and z-potential values were measured for PLGA-PEG-Bis-Sulfone NPs (86.6 ± 10.9 nm; -0.7 ± 0.3 mV) and NIPs (151 ± 10.4 nm; -5.1 ± 1.9 mV). SPR assays confirmed NIPs' specificity for the glycoprotein G2, with an apparent K D of 1.03 ± 0.61 µM. NIPs exhibited no cytotoxic effects on VERO cells at 24 and 48 h. Conclusions: This in vitro study showed that NIPs effectively target HSV-2, suggesting the potential use of these nanodevices to deliver both contrast agents as well as therapeutic compounds.

Introduction: This study investigated the interaction with membrane mimetic systems (LUVs), bacterial membranes, the CD spectra, and the bactericidal activity of two designed trematocine mutants, named Trem-HK and Trem-HSK. Mutants were constructed from the scaffold of Trematocine (Trem), a natural 22-amino acid AMP from the Antarctic fish Trematomus bernacchii , aiming to increase their positive charge., Methods: The selectivity of the designed AMPs towards bacterial membranes was improved compared to Trematocine, verified by their interaction with different LUVs and their membranolytic activity. Additionally, their α-helical conformation was not influenced by the amino acid substitutions. Our findings revealed a significant enhancement in antibacterial efficacy against ESKAPE ( Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa , and Enterobacteriaceae family) pathogens for both Trem-HK and Trem-HSK., Results: Firstly, we showed that the selectivity of the two new designed AMPs towards bacterial membranes was greatly improved compared to Trematocine, verifying their interaction with different LUVs and their membranolytic activity. We determined that their α-helical conformation was not influenced by the amino acid substitutions. We characterized the tested bacterial collection for resistance traits to different classes of antibiotics. The minimum inhibitory and bactericidal concentration (MIC and MBC) values of the ESKAPE collection were reduced by up to 80% compared to Trematocine. The bactericidal concentrations of Trematocine mutants showed important membranolytic action, evident by scanning electron microscopy, on all tested species. We further evaluated the cytotoxicity and hemolytic activity of the mutants. At 2.5 μM concentration, both mutants demonstrated low cytotoxicity and hemolysis, indicating selectivity towards bacterial cells. However, these effects increased at higher concentrations., Discussion: Assessment of in vivo toxicity using the Galleria mellonella model revealed no adverse effects in larvae treated with both mutants, even at concentrations up to 20 times higher than the lowest MIC observed for Acinetobacter baumannii , suggesting a high potential safety profile for the mutants. This study highlights the significant improvement in antibacterial efficacy achieved by increasing the positive charge of Trem-HK and Trem-HSK. This improvement was reached at the cost of reduced biocompatibility. Further research is necessary to optimize the balance between efficacy and safety for these promising AMPs., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Squitieri, Massaro, Graziano, Borocci, Cacaci, Di Vito, Porcelli, Rosato, Ceccacci, Sanguinetti, Buonocore and Bugli.)

Endoscopic Retrograde Cholangio-Pancreatography (ERCP) with biliary stenting is a minimally invasive medical procedure employed to address both malignant and benign obstructions within the biliary tract. Benign biliary strictures (BBSs), typically arising from surgical interventions such as liver transplants and cholecystectomy, as well as chronic inflammatory conditions, present a common clinical challenge. The current gold standard for treating BBSs involves the periodic insertion of plastic stents at intervals of 3-4 months, spanning a course of approximately one year. Unfortunately, stent occlusion emerges as a prevalent issue within this treatment paradigm, leading to the recurrence of symptoms and necessitating repeated ERCPs. In response to this clinical concern, we initiated a pilot study, delving into the microbial composition present in bile and on the inner surfaces of plastic stents. This investigation encompassed 22 patients afflicted by BBSs who had previously undergone ERCP with plastic stent placement. Our preliminary findings offered promising insights into the microbial culprits behind stent occlusion, with Enterobacter and Lactobacillus spp. standing out as prominent bacterial species known for their biofilm-forming tendencies on stent surfaces. These revelations hold promise for potential interventions, including targeted antimicrobial therapies aimed at curtailing bacterial growth on stents and the development of advanced stent materials boasting anti-biofilm properties., (© 2024. The Author(s).)

Researchers have explored natural products to combat the antibiotic resistance of various microorganisms. Cinnamaldehyde (CIN), a major component of cinnamon essential oil (CC-EO), has been found to effectively inhibit the growth of bacteria, fungi, and mildew, as well as their production of toxins. Therefore, this study aimed to create a delivery system for CIN using PLGA microparticles (CIN-MPs), and to compare the antifungal activity of the carried and free CIN, particularly against antibiotic-resistant strains of Candida spp. The first part of the study focused on synthesizing and characterizing the PLGA MPs, which had no toxic effects in vivo and produced results in line with the existing literature. The subsequent experiments analyzed the antifungal effects of MPs-CIN on Candida albicans and Candida glabrata , both resistant (R) and sensitive (S) strains and compared its efficacy with the conventional addition of free CIN to the culture medium. The results indicated that conveyed CIN increased the antifungal effects of the product, particularly towards C. albicans R. The slow and prolonged release of CIN from the PLGA MPs ensured a constant and uniform concentration of the active principle within the cells.

The increasing resistance of bacteria to conventional antibiotics represents a severe global emergency for human health. The broad-spectrum antibacterial activity of silver has been known for a long time, and silver at the nanoscale shows enhanced antibacterial activity. This has prompted research into the development of silver-based nanomaterials for applications in clinical settings. In this work, the synthesis of three different silver nanoparticles (AgNPs) hybrids using both organic and inorganic supports with intrinsic antibacterial properties is described. The tuning of the AgNPs' shape and size according to the type of bioactive support was also investigated. Specifically, the commercially available sulfated cellulose nanocrystal (CNC), the salicylic acid functionalized reduced graphene oxide (rGO-SA), and the commercially available titanium dioxide (TiO 2 ) were chosen as organic (CNC, rGO-SA) and inorganic (TiO 2 ) supports. Then, the antimicrobial activity of the AgNP composites was assessed on clinically relevant multi-drug-resistant bacteria and the fungus Candida albicans . The results show how the formation of Ag nanoparticles on the selected supports provides the resulting composite materials with an effective antibacterial activity.

Candida parapsilosis is the major non- C. albicans species involved in the colonization of central venous catheters, causing bloodstream infections. Biofilm formation on medical devices is considered one of the main causes of healthcare-associated infections and represents a global public health problem. In this context, the development of new nanomaterials that exhibit anti-adhesive and anti-biofilm properties for the coating of medical devices is crucial. In this work, we aimed to characterize the antimicrobial activity of two different coated-surfaces, graphene oxide (GO) and curcumin-graphene oxide (GO/CU) for the first time, against C. parapsilosis . We report the capacity of GO to bind and stabilize CU molecules, realizing a homogenous coated surface. We tested the anti-planktonic activity of GO and GO/CU by growth curve analysis and quantification of Reactive Oxigen Species( ROS) production. Then, we tested the antibiofilm activity by adhesion assay, crystal violet assay, and live and dead assay; moreover, the inhibition of the formation of a mature biofilm was investigated by a viability test and the use of specific dyes for the visualization of the cells and the extra-polymeric substances. Our data report that GO/CU has anti-planktonic, anti-adhesive, and anti-biofilm properties, showing a 72% cell viability reduction and a decrease of 85% in the secretion of extra-cellular substances (EPS) after 72 h of incubation. In conclusion, we show that the GO/CU conjugate is a promising material for the development of medical devices that are refractory to microbial colonization, thus leading to a decrease in the impact of biofilm-related infections.

Antibiotic resistance is a serious health and social problem that will have a substantial impact in the coming years on the world health and economy. Thus, the increasing demand for innovative antibiotics, has prompted many researchers in the medical, microbiological, and biochemical fields to exploit the properties of antimicrobial peptides (AMPs). When properly used, designed, and conveyed, AMPs can really represent a valid alternative to conventional drugs especially in situations that are particularly difficult to treat such as chronic infections found in Cystic Fibrosis (CF) patients. In this review we focused on the applications of AMPs in the specific field of CF, illustrating different types of peptides from natural, naturally modified, synthetic as well as the different strategies used to overcome the barriers, and the physiological conditions in which AMPs must operate., (Copyright © 2022 Elsevier GmbH. All rights reserved.)

The engineering of the surface of nanomaterials with bioactive molecules allows controlling their biological identity thus accessing functional materials with tuned physicochemical and biological profiles suited for specific applications. Then, the manufacturing process, by which the nanomaterial surface is grafted, has a significant impact on their development and innovation. In this regard, we report herein the grafting of sugar headgroups on a graphene oxide (GO) surface by exploiting a green manufacturing process that relies on the use of vibrational ball mills, a grinding apparatus in which the energy is transferred to the reacting species through collision with agate spheres inside a closed and vibrating vessel. The chemical composition and the morphology of the resulting glyco-graphene oxide conjugates (glyco-GO) are assessed by the combination of a series of complementary advanced techniques ( i.e. UV-vis and Raman spectroscopy, transmission electron microscopy, and Magic Angle Spinning (MAS) solid-state NMR (ssNMR) providing in-depth insights into the chemical reactivity of GO in a mechanochemical route. The conjugation of monosaccharide residues on the GO surface significantly improves the antimicrobial activity of pristine GO against P. aeruginosa . Indeed, glyco-GO conjugates, according to the monosaccharide derivatives installed into the GO surface, affect the ability of sessile cells to adhere to a polystyrene surface in a colony forming assay. Scanning electron microscopy images clearly show that glyco-GO conjugates significantly disrupt an already established P. aeruginosa biofilm.

Staphylococcus lugdunensis is a coagulase-negative Staphylococcus that emerges as an important opportunistic pathogen. However, little is known about the regulation underlying the transition from commensal to virulent state. Based on knowledge of S. aureus virulence, we suspected that the agr quorum sensing system may be an important determinant for the pathogenicity of S. lugdunensis . We investigated the functions of the transcriptional regulator AgrA using the agrA deletion mutant. AgrA played a role in cell pigmentation: Δ argA mutant colonies were white while the parental strains were slightly yellow. Compared with the wild-type strain, the Δ argA mutant was affected in its ability to form biofilm and was less able to survive in mice macrophages. Moreover, the growth of Δ agrA was significantly reduced by the addition of 10% NaCl or 0.4 mM H 2 O 2 and its survival after 2 h in the presence of 1 mM H 2 O 2 was more than 10-fold reduced. To explore the mechanisms involved beyond these phenotypes, the Δ agrA proteome and transcriptome were characterized by mass spectrometry and RNA-Seq. We found that AgrA controlled several virulence factors as well as stress-response factors, which are well correlated with the reduced resistance of the Δ agrA mutant to osmotic and oxidative stresses. These results were not the consequence of the deregulation of RNAIII of the agr system, since no phenotype or alteration of the proteomic profile has been observed for the ΔRNAIII mutant. Altogether, our results highlighted that the AgrA regulator of S. lugdunensis played a key role in its ability to become pathogenic. IMPORTANCE Although belonging to the natural human skin flora, Staphylococcus lugdunensis is recognized as a particularly aggressive and destructive pathogen. This study aimed to characterize the role of the response regulator AgrA, which is a component of the quorum-sensing agr system and known to be a major element in the regulation of pathogenicity and biofilm formation in Staphylococcus aureus. In the present study, we showed that, contrary to S. aureus, the agrA deletion mutant produced less biofilm. Inactivation of agrA conferred a white colony phenotype and impacted S. lugdunensis in its ability to survive in mice macrophages and to cope with osmotic and oxidative stresses. By global proteomic and transcriptomic approaches, we identified the AgrA regulon, bringing molecular bases underlying the observed phenotypes. Together, our data showed the importance of AgrA in the opportunistic pathogenic behavior of S. lugdunensis allowing it to be considered as an interesting therapeutic target.

Background: SARS-CoV-2 antigen detection has currently expanded the testing capacity for COVID-19, which yet relies on the SARS-CoV-2 RNA RT-PCR amplification., Objectives: To report on a COVID-19 testing algorithm from a tertiary care hospital emergency department (ED) that combines both antigen (performed on the ED) and RT-PCR (performed outside the ED) testing., Methods: Between December 2020 and January 2021, in a priori designated, spatially separated COVID-19 or non-COVID-19 ED areas, respectively, symptomatic or asymptomatic patients received SARS-CoV-2 antigen testing on nasopharyngeal swab samples. Antigen results were promptly accessible to guide subsequent, outside performed confirmatory (RT-PCR) testing., Results: Overall, 1083 (100%) of 1083 samples in the COVID-19 area and 1815 (49.4%) of 3670 samples in the non-COVID-19 area had antigen results that required confirmation by RT-PCR. Antigen positivity rates were 12.4% (134/1083) and 3.7% (66/1815), respectively. Compared to RT-PCR testing results, sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of antigen testing were, respectively, 68.0%, 98.3%, 88.8%, and 94.1% in the COVID-19 area, and 41.9%, 97.3%, 27.3%, and 98.6% in non-COVID-19 area. Practically, RT-PCR tests were avoided in 50.6% (1855/3670) of non-COVID-19 area samples (all antigen negative) from patients who, otherwise, would have needed antigen result confirmation., Conclusions: Our algorithm had value to preserve RT-PCR from avoidable usage and, importantly, to save time, which translated into a timely RT-PCR result availability in the COVID-19 area.

The custom functionalization of a graphene surface allows access to engineered nanomaterials with improved colloidal stability and tailored specific properties, which are available to be employed in a wide range of applications ranging from materials to life science. The high surface area and their intrinsic physical and biological properties make reduced graphene oxide and graphene oxide unique materials for the custom functionalization with bioactive molecules by exploiting different surface chemistries. In this work, preparation (on the gram scale) of reduced graphene oxide and graphene oxide derivatives functionalized with the well-known antibacterial agent salicylic acid is reported. The salicylic acid functionalities offered a stable colloidal dispersion and, in addition, homogeneous absorption on a sample of textile manufacture (i.e., cotton fabrics), as shown by a Raman spectroscopy study, thus providing nanoengineered materials with significant antibacterial activity toward different strains of microorganisms. Surprisingly, graphene surface functionalization also ensured resistance to detergent washing treatments as verified on a model system using the quartz crystal microbalance technique. Therefore, our findings paved the way for the development of antibacterial additives for cotton fabrics in the absence of metal components, thus limiting undesirable side effects.

Background: Hospitalized patients with COVID-19 admitted to the intensive care unit (ICU) and requiring mechanical ventilation are at risk of ventilator-associated bacterial infections secondary to SARS-CoV-2 infection. Our study aimed to investigate clinical features of Staphylococcus aureus ventilator-associated pneumonia (SA-VAP) and, if bronchoalveolar lavage samples were available, lung bacterial community features in ICU patients with or without COVID-19., Methods: We prospectively included hospitalized patients with COVID-19 across two medical ICUs of the Fondazione Policlinico Universitario A. Gemelli IRCCS (Rome, Italy), who developed SA-VAP between 20 March 2020 and 30 October 2020 (thereafter referred to as cases). After 1:2 matching based on the simplified acute physiology score II (SAPS II) and the sequential organ failure assessment (SOFA) score, cases were compared with SA-VAP patients without COVID-19 (controls). Clinical, microbiological, and lung microbiota data were analyzed., Results: We studied two groups of patients (40 COVID-19 and 80 non-COVID-19). COVID-19 patients had a higher rate of late-onset (87.5% versus 63.8%; p = 0.01), methicillin-resistant (65.0% vs 27.5%; p < 0.01) or bacteremic (47.5% vs 6.3%; p < 0.01) infections compared with non-COVID-19 patients. No statistically significant differences between the patient groups were observed in ICU mortality (p = 0.12), clinical cure (p = 0.20) and microbiological eradication (p = 0.31). On multivariable logistic regression analysis, SAPS II and initial inappropriate antimicrobial therapy were independently associated with ICU mortality. Then, lung microbiota characterization in 10 COVID-19 and 16 non-COVID-19 patients revealed that the overall microbial community composition was significantly different between the patient groups (unweighted UniFrac distance, R 2 0.15349; p < 0.01). Species diversity was lower in COVID-19 than in non COVID-19 patients (94.4 ± 44.9 vs 152.5 ± 41.8; p < 0.01). Interestingly, we found that S. aureus (log 2 fold change, 29.5), Streptococcus anginosus subspecies anginosus (log 2 fold change, 24.9), and Olsenella (log 2 fold change, 25.7) were significantly enriched in the COVID-19 group compared to the non-COVID-19 group of SA-VAP patients., Conclusions: In our study population, COVID-19 seemed to significantly affect microbiological and clinical features of SA-VAP as well as to be associated with a peculiar lung microbiota composition.

Glycerol (Gly) can be dissimilated by two pathways in bacteria. Either this sugar alcohol is first oxidized to dihydroxyacetone (DHA) and then phosphorylated or it is first phosphorylated to glycerol-3-phosphate (GlyP) followed by oxidation. Oxidation of GlyP can be achieved by NAD-dependent dehydrogenases or by a GlyP oxidase. In both cases, dihydroxyacetone phosphate is the product. Genomic analysis showed that Enterococcus faecium harbors numerous genes annotated to encode activities for the two pathways. However, our physiological analyses of growth on glycerol showed that dissimilation is limited to aerobic conditions and that despite the presence of genes encoding presumed GlyP dehydrogenases, the GlyP oxidase is essential in this process. Although E. faecium contains an operon encoding the phosphotransfer protein DhaM and DHA kinase, which are required for DHA phosphorylation, it is unable to grow on DHA. This operon is highly expressed in stationary phase but its physiological role remains unknown. Finally, data obtained from sequencing of a transposon mutant bank of E. faecium grown on BHI revealed that the GlyP dehydrogenases and a major intrinsic family protein have important but hitherto unknown physiological functions., (© The Author(s) 2021. Published by Oxford University Press on behalf of FEMS.)

The aim of this systematic review is to collect clinical trials conducted using essential oils (EOs) in obstetric symptoms by evaluating if and in which context the aromatherapy practice is effective in obstetrics. The research was conducted by using the databases of EMBASE, Medline, Biosis and Toxcenter, PubMed, and Google Scholar search engine, selecting articles from January 2004 to July 2020. This study was performed according to the MOOSE and PRISMA guidelines. Only the randomized clinical trials were considered, and in cases of multiple publications, it was considered the most up to date information. Biases were highlighted. In the presence of homogeneous data, pooling statistics and meta-analysis were applied. The research led to 71 articles, 17 of which were eligible. Among the trials selected, eight investigated the effectiveness of EOs on anxiety, depression, and stress. Two concerned the treatment of nausea and vomiting, six evaluated the application of EOs on labor for pain treatment, and two showed the effectiveness in the treatment of episiotomy. The heterogeneity of works carried out so far has made it possible to develop a meta-analysis only in the field of pain treatment during childbirth, identifying the effectiveness of the EOs Lavandula spp. and Rosa damascena., (© 2020 John Wiley & Sons, Ltd.)

The purpose of this study was to correlate the chemical composition of four commercial concentrated glycerine macerates (C-GMs), produced through the same extraction method, with their in vitro antimicrobial, antioxidant, and immunomodulatory properties, in order to evaluate their potential for healing upper airway diseases. C-GMs of Carpinus betulus (CB), Ficus carica (FC), Alnus glutinosa (AG) and Ribes nigrum (RN) were studied. The quality was evaluated using HPLC and IM-SPME/GC-MS systems; anti-oxidant and anti-microbial activities were assessed by the respective DPPH test, and micro-broth dilution test performed against 10 strains of Streptococcus pyogenes and 10 probiotic strains. ELISA and MTT tests were used to assess the immunomodulatory activity and the cytotoxicity of C-GMs, respectively. A significant correlation was found between the number of active compounds and the in vitro C-GMs effectiveness. Furthermore, the C-GMs of AG showed the best anti-microbial activity on pathological strains and, together with CB, the best anti-oxidant activity. The ELISA test exhibited a good immunomodulatory activity of RN. In vitro data support the integrated use of C-GMs of CB, AG, and RN in presence of airway diseases, and highlight the importance of standard procedures in cultivation, harvest and post-harvest treatments, as a premise for C-GMs with consistent characteristics.

Salmonella spp. represent a public health concern for humans and animals due to the increase of antibiotic resistances. In this scenario, the use of essential oils (EOs) could be a valid tool against Salmonella contamination of meat. This work compares the in vitro effectiveness of an Italian mixture of feed additives based on EOs (GR-OLI) with EO of Origanum vulgare L., recently admitted by European Food Safety Authority (EFSA) for animal use. Twenty-nine Salmonella serotypes isolated from poultry and pig farms were used to assess GR-OLI and O. vulgare EO antimicrobial propeties. O. vulgare EO was active on the disaggregation of mature biofilm, while GR-OLI was capable of inhibiting biofilm formation and disaggregating preformed biofilm. Furthermore, GR-OLI inhibited bacterial adhesion to Caco-2 cells in a dose-dependent manner. Both products showed inhibition of bacterial growth at all time points tested. Finally, the synergistic action of GR-OLI with commonly used antibiotics against resistant strains was investigated. In conclusion, the mixture could be used both to reduce the meat contamination of Salmonella spp. before slaughter, and in synergy with low doses of ciprofloxacin against resistant strains. Although EOs as feed additives are already used in animal husbandry, no scientific study has ever highlighted their real antimicrobial potential.

The aim of this study was to evaluate the antibacterial properties of graphene oxide (GO) against Enterococcus faecalis in vitro conditions and when used to coat dentin surface to prevent E. faecalis adhesion. The ATCC strain of E. faecalis 29212 has been used to perform a viability test. The pellet was suspended in ultrapure water, NaCl, PBS buffer, CaCl 2 and MgCl 2 , Luria-Bertani broth solutions. The viability was evaluated by the colony forming unit counting method. Atomic force microscopy images and the measure of surface zeta potential variation were analyzed. Dentin discs were covered with a film of GO ( n = 15) or were not treated ( n = 15). Bacterial suspension was added to each sample of dentine discs and microbial counts were calculated. Statistically significant differences between two groups were assessed by a two-tailed unpaired t -test. Bacteria cell morphology was investigated with scanning electron microscopy. The highest growth inhibition was obtained in ddH 2 O and CaCl 2 solution while, in PBS and NaCl, GO had poor antibacterial efficacy with a growth enhancing effect in the latter. GO on dentin discs demonstrated high antibacterial activity. GO film has demonstrated acceptable adhesion properties to root dentin and a role in the inhibition of bacterial film proliferation and biofilm formation.

Species of the Enterobacter cloacae complex (ECC) represent an increasing cause of hospital-acquired infections and commonly exhibit multiple antibiotic resistances. In order to identify genes that may play a role in its ability to colonize the host, we used the transposon-sequencing (Tn-seq) approach. To this end, a high-density random transposon insertion library was obtained from E. cloacae subsp. cloacae ATCC 13047, which was used to analyze the fitness of ca. 300,000 mutants in Galleria mellonella colonization model. Following massively parallel sequencing, we identified 624 genes that seemed essential for the optimal growth and/or the fitness within the host. Moreover, 63 genes where mutations resulted in positive selection were found, while 576 genes potentially involved in the in vivo fitness were observed. These findings pointed out the role of some transcriptional regulators, type VI secretion system, and surface-associated proteins in the in vivo fitness of E. cloacae ATCC 13047. We then selected eight genes based on their high positive or negative fold changes (FCs) and tested the corresponding deletion mutants for their virulence and ability to cope with stresses. Thereby, we showed that ECL&#95;02247 (encoding the NAD-dependent epimerase/dehydratase) and ECL&#95;04444 (coding for a surface antigen-like protein) may correspond to new virulence factors, and that the regulator ECL&#95;00056 was involved in in vivo fitness. In addition, bacterial cells lacking the flagellum-specific ATP synthase FliI (ECL&#95;03223) and the hypothetical protein ECL&#95;01421 were affected for mobility and resistance to H 2 O 2 , respectively. All these results yield valuable information regarding genes important for infection process and stress response of E. cloacae ATCC 13047 and participate to a better understanding of the opportunistic traits in this bacterial pathogen., (Copyright © 2020 Guérin, Lallement, Goudergues, Isnard, Sanguinetti, Cacaci, Torelli, Cattoir and Giard.)

The clinical challenge on surface engineering of medical devices to prevent microorganisms adhesion and biofilm formation, has become an essential aspect for medical implants. Antibacterial properties of Graphene Oxide (GO) have been demonstrated across a broad spectrum of bacteria, and the different mechanisms of action with which this nanomaterial interacts with the microbial surface have been elucidated in detail. Innovative protective coatings based on graphene film and hydrogel could represent an innovative solution for the prevention of nosocomial pathogens colonization on implantable device. This brief review mainly focuses on the applications of graphene in nanomedicine with a particular deepening on the antibacterial properties of GO and GO-based nanomaterials. In order to evaluate the possible future applications of GO as an anti-biofilm coating material for medical devices, studies on the ability of graphene coated surface to prevent microbial adhesion are also discussed. A concise review on in vitro toxicity and in vivo safety is also presented.