Search

The improvement of solder joint mechanical performance due to bismuth additions is of ongoing interest. This paper investigates the influence of 0–14 wt% Bi on microstructure formation in Sn-0.7 wt%Cu-0.05 wt%Ni-xBi solder balls on Cu substrates. It is shown that Bi additions reduce the Ni content of (Cu,Ni)6Sn5, increase the size of primary (Cu,Ni)6Sn5 rods and reduce the thickness of the Cu6Sn5 reaction layer, although these effects are subtle until the Bi content reaches ∼5 wt%Bi and Bi additions of ≤5 wt% did not significantly affect the positive effects of Ni. Higher Bi additions (≥8 wt% Bi) caused a transition of the tin growth texture from columnar grains with a fibre texture towards a single grain with subgrains. Bi additions increased the non-equilibrium freezing range and caused a nonequilibrium ternary eutectic reaction in joints containing ≥2 wt% Bi. Bi contents less than 2 wt% are required to prevent (Bi) phase formation during solidification.

There is a major interest in replacing cobalt binder in hardmetals (cemented carbides) aiming for materials with similar or even improved properties at a lower price. Nickel is one of the materials most commonly used as a binder alternative to cobalt in these metal-ceramic composites. However, knowledge on mechanical properties and particularly on fatigue behavior of Ni-base cemented carbides is relatively scarce. In this study, the fatigue mechanics and mechanisms of a fine grained WC-Ni grade is assessed. In doing so, fatigue crack growth (FCG) behavior and fatigue limit are determined, and the attained results are compared to corresponding fracture toughness and flexural strength. An analysis of the results within a fatigue mechanics framework permits to validate FCG threshold as the effective fracture toughness under cyclic loading. Experimentally determined data are then used to analyze the fatigue susceptibility of the studied material. It is found that the fatigue sensitivity of the WC-Ni hardmetal investigated is close to that previously reported for Co-base cemented carbides with alike binder mean free path. Additionally, fracture modes under stable and unstable crack growth conditions are inspected. It is evidenced that stable crack growth under cyclic loading within the nickel binder exhibit faceted, crystallographic features. This microscopic failure mode is rationalized on the basis of the comparable sizes of the cyclic plastic zone ahead of the crack tip and the characteristic microstructure length scale where fatigue degradation phenomena take place in hardmetals, i.e. the binder mean free path. (C) 2014 Elsevier Ltd. All rights reserved.

The fracture and fatigue characteristics of several cemented carbide grades are investigated as a function of their microstructure. In doing so, the influence of binder chemical nature and content (Co and 76 wt.% Co-24 wt.% Ni), as well as carbide grain size on hardness, flexural strength, fracture toughness and fatigue crack growth (FCG) behavior is evaluated. Mechanical testing is combined with a detailed inspection of crack-microstructure interaction, by means of scanning electron microscopy, in order to evaluate crack-path tortuosity and to discern fracture and fatigue micromechanisms within the metallic binder. Results show that CoNi-base hardmetals exhibit slightly lower hardness but higher toughness values than Co-base grades. Meanwhile, flexural strength is found to be rather independent of the binder chemical nature. Regarding FCG behavior, experimental results indicate that: (1) FCG threshold (K-th) values for coarse-grained grades are higher than those measured for the medium-grained ones; and (2) fatigue sensitivity levels exhibited by CoNi- and Co-base cemented carbides, for a given binder mean free path, are similar. These findings are rationalized on the basis of the increasing relevance of crack deflection mechanisms as microstructure gets coarser and the evidence of similar fatigue degradation phenomena within the binder independent of its chemical nature, respectively. (C) 2014 Elsevier Ltd. All rights reserved.