Search

The complexity of cancer requires a comprehensive approach to understand its diverse manifestations and underlying mechanisms. Initially outlined by Hanahan and Weinberg in 2000 and updated in 2010, the hallmarks of cancer provide a conceptual basis for understanding inherent variability in cancer biology. Recent expansions have further elucidated additional hallmarks, including phenotypic plasticity and senescent cells. The International Agency for Research on Cancer (IARC) has identified the key characteristics of carcinogens (KCCs) to evaluate their carcinogenic potential. We analyzed chemicals of concern for environmental exposure that interact with specific receptors to induce genomic instability, epigenetic alterations, immune suppression, and receptormediated effects, thereby contributing to chronic inflammation. Despite their varying degrees of carcinogenicity, these chemicals have similar KCC profiles. Our analysis highlights the pivotal role of receptor binding in activating most other KCCs, underscoring their significance in cancer initiation. Although KCCs are associated with early molecular or cellular events, they do not encompass processes directly linked to full cellular malignancy. Thus, there is a need to integrate clear endpoints that anchor KCCs to the acquisition of a complete malignant phenotype into chemical testing. From the perspective of toxicology and cancer research, an all-encompassing strategy that incorporates both existing and novel KCCs and cancer hallmarks is essential to enable the targeted identification of prevalent carcinogens and facilitate zone-specific prevention strategies. To achieve this goal, collaboration between the KCC and cancer hallmarks communities becomes essential. [ABSTRACT FROM AUTHOR]

During the key event 1 of skin sensitization defined as covalent binding or haptenization of sensitizer to either thiol or amino group of skin proteins, a sensitizer not only covalently binds with skin proteins but also interacts with nucleophilic small molecules such as glutathione (GSH). Although GSH would not be directly associated with skin sensitization, this interaction may be applied for developing an alternative test method simulating key event 1, haptenization. Thus, the aim of the present study was to examine whether N-acetyl-L-cysteine methyl ester (NACME), a thiol-containing compound, was selected as an electron donor to determine whether NACME reacted with sensitizers. Following a reaction of NACME with a sensitizer in a 96-well plate, the remaining NACME was measured spectrophotometrically using 5,5'-dithio-bis-(2-nitrobenzoic acid) (DTNB). Following the optimization of test conditions with two different vehicles, such as acetonitrile (ACN) and dimethyl sulfoxide (DMSO), 64 test chemicals were tested to determine the predictive capacity of current NACME test method. The results obtained showed, the predictive capacity of 94.6% sensitivity, 88.9% specificity, and 92.2% accuracy utilizing DMSO as a vehicle with a cutoff NACME depletion of 5.85%. The three parameters were also over 85% in case of ACN. These values were comparable to or better than other OECD-approved test methods. Data demonstrated that a simple thiol-containing compound NACME might constitute as a reliable candidate for identifying reactive skin sensitizers, and that this method be considered as practical method as a screening tool for assessing a chemical's tendency to initiate skin sensitization. [ABSTRACT FROM AUTHOR]

In the past few years, due to the Covid-19 pandemic, the interest towards textiles with antimicrobial functionalities faced a significant boost. This study proposes a rapid and convenient method, in terms of reactants and equipment, for fabricating antimicrobial coatings on textiles. Through the electroless silver plating reaction, silver coatings were successfully applied on cotton and polyester, rapidly and at room temperature. Functionalized samples were characterized by morphological (optical and scanning electron microscopies) and chemical tests (X-ray photoelectron spectroscopy, XPS) to investigate the nature of the silver coating. Although distinct nanoparticles did not form, XPS analysis detected the presence of silver, which resulted in an increased surface roughness and hydrophobicity of both cotton and polyester textiles. Ag-coated samples exhibited approximately 80% biocompatibility with murine L929 fibroblasts or human HaCaT cells, and strong antibacterial properties against Escherichia coli in direct contact tests. In antiviral experiments with SARS-CoV-2 virus, treated cotton showed a 100% viral reduction in 30 min, while polyester achieved 100% reduction in 1 h. With a human norovirus surrogate, the Feline Calicivirus, both treated textiles have a faster antiviral response, with more than 60% viral reduction after 5 min, while achieving a 100% reduction in 1 h. In conclusion, this study presents a fast, efficient, and low-cost solution for producing antimicrobial textiles with broad applications in medical and healthcare scenarios. [ABSTRACT FROM AUTHOR]

γ-aminobutyric acid (GABA) and rare ginsenosides are good antioxidant and anti-fatigue active components that can be enriched via probiotic fermentation. In this study, ginseng and germinated brown rice were used as raw materials to produce six fermented purees using fermentation and non-fermentation technology. We tested the chemical composition of the purees and found that the content of GABA and rare ginsenoside (Rh4, Rg3, and CK) in the puree made of ginseng and germinated brown rice (FGB) increased significantly after fermentation. The antioxidant activity of the six purees was determined using cell-free experiments, and it was found that FGB had better ferric-ion-reducing antioxidant power (FRAP) and 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging rates, exhibiting better antioxidant effects. We then evaluated the antioxidant effect of FGB in HepG2 cells induced by H2O2 and found that FGB can reduce the generation of reactive oxygen species (ROS) in HepG2 cells and increase the membrane potential level, thereby improving oxidative damage in these cells. In vivo experiments also showed that FGB has good antioxidant and anti-fatigue activities, which can prolong the exhaustive swimming time of mice and reduce the accumulation of metabolites, and is accompanied by a corresponding increase in liver glycogen and muscle glycogen levels as well as superoxide dismutase and lactate dehydrogenase activities. Finally, we believe that the substances with good antioxidant and anti-fatigue activity found in FGB are derived from co-fermented enriched GABA and rare ginsenosides. [ABSTRACT FROM AUTHOR]

This article explores the use of omics data, such as genomic, transcriptomic, proteomic, and metabolomic data, in chemical grouping and read-across for chemical risk assessment. It explains that traditional approaches to chemical safety rely on in vivo toxicity data, but there is a growing recognition of the need for more mechanistically based approaches that do not involve animal testing. The article introduces non-experts to the concept of grouping and read-across, discusses the value of omics technologies in this context, presents case studies, and identifies challenges and next steps for incorporating omics data into chemical grouping. It also discusses the regulatory landscape and the need for standardized reporting templates. However, it acknowledges that there are limitations to chemical grouping, as structural similarity does not always predict similar biological responses. Overall, the article highlights the potential of omics data in chemical grouping and the need for further research and implementation in this area. [Extracted from the article]

Diabetes mellitus is a severe condition that has the potential to impair strength. The disease known as diabetes mellitus, which is a chronic condition, is brought on by a significant rise in blood glucose levels. The diagnosis of this condition is made using a variety of chemical and physical testing. Diabetes, however, can harm the organs if it goes undetected. This study develops a hybrid deep-learning technique to recognize Type 2 diabetes mellitus. The data is cleaned up at the pre-processing stage using a data transformation technique based on the Yeo-Jhonson transformation. The tanimoto similarity is used in the feature selection process to select the best features from the data. To prepare data for future processing, data augmentation is performed. The Deep Residual Network and the Rider-based Neural Network are recommended and trained separately for the T2DM identification using the Competitive Multi-Verse Rider Optimizer. The outputs generated by the RideNN and DRN classifiers are blended using correlation-based fusion. The suggested CMVRO-based NN-DRN has shown improved performance with the highest accuracy of 91.4%, sensitivity of 94.8%, and specificity of 90.1%. [ABSTRACT FROM AUTHOR]

Purpose: Evaluate the inflammatory outcome of a two-piece novel titanium dental implant (test article) vs. a one- piece titanium dental implant (control article) inducing experimental peri-implantitis in a dog model. Materials & Methods: A novel, two-piece pre-assembled implant with a 0.2-thickness sleeve in its coronal 4.2 mm part was developed (Test article). Ligature-induced experimental periimplantitis model was applied, followed by decontamination and bone grafting in seven dogs. Four groups were assessed according to decontamination and resurfacing protocol: E1 (Experimental 1): test article- sleeve removed, mechanical and chemical decontamination, new rough surface non-threaded sleeve was inserted; E2 (Experimental 2): test article- sleeve removed, mechanical and chemical decontamination, test article remained denuded presenting a turned non-threaded surface; C1 (Control 1): sleeve remained, mechanical and chemical decontamination in test article, original rough surface, non-threaded sleeve; C2 (Control 2): control article cleaning, mechanical and chemical decontamination of original rough surface, threaded implant. Buccolingual and mesiodistal sections were prepared for each site. Resin qualitative and semi-quantitative histopathologic inflammatory parameters were analyzed. Results: Group C1 showed statistically significant highest signs of residual long-term inflammation, followed by groups E1, and C2. Group E2 displayed the lowest local inflammation. Mesio/Distal aspects displayed increased long-term inflammatory infiltrate albeit not statistically significant. Conclusions: Within the limits of the present study, it may be concluded that – (1) The decontamination procedure is more effective in a commercial one-piece vs. a two-piece dental implant. (2) Mechanical and chemical decontamination outcome is insufficient. Resurfacing improves the decontamination outcome. (3) Decontamination of the turned surface is superior to the rough surface. Clinical relevance: When choosing the most appropriate dental implant for individuals with a high risk for peri-implant disease, a one-piece dental implant with a turned crestal surface is preferable. Once occurring, the control of peri-implant disease inflammation may be more successful. Decontamination is usually not enough. Resurfacing is highly recommended if possible. [ABSTRACT FROM AUTHOR]

The demand for superhydrophobic fabric with self‐cleaning and antibacterial features as potential practical applications has been rising steadily with the passage of time. In this research work, the wet chemical method is used to manufacture cotton with a superhydrophobic coating. Thus, Nanoparticles of silver were produced by using an in situ method. Afterward, the fabric is treated with a solution of perfluorooctyltriethoxysilane to make it superhydrophobic. The cotton fabric performs remarkably with exceptional hydrophobicity as it had a contact angle of 157 ± 1° and less than 10° in sliding angle. Water droplet's dynamic behavior is also studied so that the superhydrophobic fabric development can be proven. The fabric shows excellent chemical durability by performing chemical tests. The antimicrobial and self‐cleaning properties are greatly enhanced by the superhydrophobic coating on cotton. Particle density on the superhydrophobic cotton before and after self‐cleaning was found 5.1 and 0.4 mg/cm2. In addition, the treated cotton fabric also exhibited superior antibacterial properties against Escherichia coli bacteria. Therefore, the developed multifunctional cotton fabric can be used in real‐life applications. Highlights: Cotton fabric enables to repelling of dirt, oil, and water‐based stains more effectively.Silver nanoparticles possess potent antibacterial properties.Incorporation of PFOTS controls the release of silver into the environment.Versatile applications from healthcare and hospitality to outdoor and athletic apparel. [ABSTRACT FROM AUTHOR]

Food commerce, especially for the general public, is greatly impacted by the capacity to identify and recognize chemical samples for food applications. Every chemical sample response has a unique, distinguishing smell. These advancements highlight the method of an artificial neural networks (ANN) to distinguish the distinctive fragrance from the reaction of substances. The categorization of various smell patterns has diminished confidence in ANN technology. Using an ANN technique and a sensor-based e-nose system for food applications, each chemical's identification has been done commercially. The system comprises a 5-gas sensor selection that recognizes chemical talk while allowing for an improvement in permitting while falling gas is planned outside. To build a model of a different signal reaction, individual sensors are equally collected and merged into the innovation -favored sensor array. Demonstrates how it is related to the chemical test. The e-nose categorization has been tested with five different chemical samples and five different sensor classes. The e-nose approach, which comprises five sensors, can classify each chemical reaction model, starting with the results. With more sensors being employed, the classification accuracy of the precise chemical reaction improves. These data demonstrate that the ANN-based e-nose method promises a successful classification system for chemical sample responses for a characteristic odor sample. [ABSTRACT FROM AUTHOR]

Introduction Methods Results Conclusion People with HIV (PWH) are at an increased risk of developing cardiovascular disease (CVD) compared to HIV‐negative individuals. We sought to evaluate the adherence to medications for CVD in PWH and identify factors associated with non‐adherence to these medications.We conducted a cross‐sectional study at the University Hospitals of Leicester NHS Trust between 16 April 2019 and 8 November 2022. We recruited consecutive PWH, who were attending a routine follow‐up outpatient appointment and were prescribed at least one medication for CVD. In addition, we included urinary adherence results of patients with samples collected as part of routine clinical care. We used liquid chromatography–tandem mass spectrometry (LC–MS/MS) to assess if their prescribed medications (antihypertensives, diuretics, beta‐blockers, lipid‐lowering agents, antiplatelets, anticoagulants, antidiabetic medications) were present in the participant's urine sample. Multivariable models were used to identify demographic or clinical features that were associated with non‐adherence.A total of 162 PWH were included in the analysis. Median age was 55 [interquartile range (IQR): 50–61] years, 63% were male, average time living with HIV was 15 years (IQR: 11–19) and the majority (98%) had an undetectable HIV viral load. In approximately one‐third of patients (59/162), at least one prescribed medication of interest was not detected in urine. Non‐adherence to lipid‐lowering agents was common (35/88, 40%). On multivariable logistic regression, the number of prescribed cardiovascular medications, was associated with medication non‐adherence [medication non‐adherence, per one medication increase: adjusted odds ratio (95% confidence interval) = 1.78 (1.34–2.36); p < 0.001].We found sub‐optimal adherence to medications for CVD in PWH. In order to maximize the clinical benefit of statin therapy in PWH, factors requiring consideration include: improved medication adherence, awareness of polypharmacy, educational interventions and quantitative assessment of sub‐optimal adherence through chemical adherence testing. [ABSTRACT FROM AUTHOR]

The aim of the study was to evaluate the functional properties of muffins fortified with white clover flowers (Trifolium repens L.), which were added to the dough in the following amounts: (i) 0% (control); (ii) 2.5%; (iii) 5.5%; (iv) 7.5%; and (v) 10%. The organoleptic properties were assessed by a panel of consumers. Additionally, the following parameters were also tested: basic chemical composition, total polyphenols, the antioxidant activity together with antiproliferative effects on the A375 melanoma cell line, starch nutritional fractions and the in vitro glycemic index. As a result, replacing wheat flour with white clover flour significantly affected the color, aroma and taste of the muffins. The content of proteins, fats, total ash, dietary fiber, resistant starch (RS), slowly digestible starch (SDS),total polyphenols and antioxidant activity increased statistically significantly with the elevated amount of white clover flour added to the dough. At the same time, the content of free glucose (FG), rapidly available glucose (RAG) and rapidly digestible starch (RDS), the value of the in vitro glycemic index and the viability of melanoma cancer cells decreased significantly. The muffins enriched with white clover flowers might constitute an interesting proposition and extension of the existing assortment of confectionery products. [ABSTRACT FROM AUTHOR]

There is a growing interest in the effects of climate warming on olfaction, as temperature may affect this essential sense. In insects, the response of the olfactory system to developmental temperature might be mediated by body size or mass because body size and mass are negatively affected by developmental temperature in most ectotherms. We tested this hypothesis of a mass-mediated effect of developmental temperature on olfaction in the moth Spodoptera littoralis. We measured the olfactory sensitivity of male to female sex pheromone and five plant odors using electroantennography. We compared males reared at an optimal temperature (25 °C with a daily fluctuation of ±5 °C) and at a high temperature (33 ± 5 °C) close to the upper limit of S. littoralis. On average, the olfactory sensitivity of males did not differ between the two developmental temperatures. However, our analyses revealed an interaction between the effects of developmental temperature and body mass on the detection of the six chemicals tested. This interaction is explained by a positive relationship between antennal sensitivity and body mass observed only with the high developmental temperature. Our results show that the effect of developmental temperature may not be detected when organism size is ignored. An interaction between the effects of developmental temperature and body mass on olfaction in a moth is explained by a positive relationship between antennal sensitivity and body mass observed only with a high temperature. [ABSTRACT FROM AUTHOR]

In recent years, heavy rainfall disasters linked to climate change have become more frequent, raising concerns about the release of chemicals stored in factories. Assessing chemical contamination during such emergencies therefore necessitates the development of a quick and easy method for evaluating hazardous contaminants in combination with toxicity testing. This study proposes a "toxicity screening" method that combines biological response testing and chemical analysis to systematically evaluate hazardous contaminants in emergency situations. The toxicity screening method evaluates the water quality in three steps, including water quality measurements and a delayed fluorescence (DF) assay, metal content measurements and a DF assay, and targeted screening analysis and a DF assay. The efficacy of this method was tested using industrial wastewater from 14 locations. Seven of the samples were non-toxic, while the other seven samples were toxic, displaying no observed effect concentration (NOEC) values ranging from 0.625 to 20%. Two toxic samples in the first phase possessed high total chlorine concentrations (0.4 mg L−1) and conductivities (2200 mS m−1), indicating that the main sources of toxicity were residual chlorine and a high salt concentration. In the second phase, metal content analysis identified metals as the toxicity cause in four samples. In the third phase, the organic contaminants were analyzed, and tri-n-octyl phosphate (TNOP) was detected at a concentration of 0.00027 mg L−1. The results of solid-phase extraction experiments and exposure tests with TNOP alone indicated that the contribution of TNOP to the toxicity was negligible and that chemicals not adsorbed on the solid-phase extraction cartridges were the cause of toxicity. The proposed method can therefore be considered effective for disaster-related water quality assessment, delivering results within 12 days. [ABSTRACT FROM AUTHOR]

This document is a collection of summaries of various research articles related to dermatology. The first article focuses on occupational contact dermatitis (OCD) among professional cleaners, highlighting the prevalence, risk factors, and prevention methods. The second article discusses allergic contact dermatitis (ACD) caused by topical antibacterials/antiseptics, examining the demographic and clinical characteristics of patients in Turkey. The third article explores changes in sensitization patterns in chronic actinic dermatitis (CAD) and the frequency of positive patch testing in CAD patients. The fourth article presents a systematic review and meta-analysis of hand eczema (HE) in healthcare workers, providing an overview of the prevalence and incidence of HE, as well as the severity of the condition. The final article focuses on a genome-wide association study of HE, identifying a genetic locus associated with the condition and exploring the genetic overlap between HE and atopic dermatitis (AD). This collection of abstracts includes studies on various topics related to dermatology and skin sensitization. [Extracted from the article]

The quality of the yellowfin tuna caught by small-scale fishers is heavily influenced by how the catches are handled and stored on board. One effective method that small-scale fishers can use to maintain the quality of their catch is by cooling it with ice. This helps prevent the growth of bacteria in the fish, which can cause sensory, physical, microbiological, and chemical damage. Such damage can result in poor catch quality and lower market value. Therefore, this study aimed to assess the quality of the yellowfin tuna catches by small-scale fishermen in Bone Bay, specifically at the Lonrae fish landing site. This assessment involved conducting sensory, physical, microbiological, and chemical tests on the catch. The results indicated that the catch had high quality, as evidenced by a sensory score of 8. The fish had a pH ranging from 5.7 to 5.8 and a temperature close to 0°C. The average total bacteria count was 1.1 x 104 colonies/g, and there were no traces of Salmonella or Escherichia coli (<3 MPN/g). The histamine values ranged from 6.99 to 7.31. Heavy metals, specifically mercury, lead, and cadmium, were measured at 0.05, 0.0166, and 0.0049mg/ k, respectively. [ABSTRACT FROM AUTHOR]

Research on natural sources of polyunsaturated fatty acids (PUFAs) for both food and nutraceutical prospects has significantly grown in recent years. Some plant oils and lipid extracts contain carotenoids, xanthophylls, sterols, and/or phenolic compounds that can provoke a lipid hydroperoxides (LOOHs) overestimation when quantifying them using nonselective colorimetric assays. Herein, we have optimized a mid‐infrared method using Fourier‐transform infrared spectroscopy coupled with attenuated total reflectance (ATR) to quantify LOOHs in oils or lipid extracts. This method is based on the conversion of triphenylphosphine (TPP) to triphenylphosphine oxide (TPPO) in the presence of hydroperoxides, with a direct assessment of TPPO levels following the formation of an oil film on the ATR crystal's surface, allowing for a low detection limit of 0.5 mmol of LOOH kg−1. The concentration of oil and TPP, as well as the reaction time, were optimized. It was demonstrated that the presence of pigments, unsaponifiable compounds, phenolics, and/or PUFAs on oils, do not disrupt the analysis. Furthermore, the stoichiometry of the TPP/LOOH reaction was examined, confirming the reliability of the method in detecting various forms of hydroperoxides. An accelerated oxidation study was carried out and the hydroperoxide contents measured using TPP/TPPO were found to be comparable to those obtained using the ferric thiocyanate method. Our method offers a fast, simple, robust, and sensitive approach to accurately quantify hydroperoxides, regardless of the chemical composition of oil or lipid extracts. Practical Application: The hydroperoxide assay method outlined in this study allows for the rapid and straightforward detection of hydroperoxides in pure oil matrices. The method's elevated sensitivity facilitates the early identification of oxidation indicators in oils, especially those with significant carotenoid or xanthophyll contents since these compounds may affect the results when using methods based on colorimetric quantification of hydroperoxides. This accurate, precise, and reproducible approach requires only small quantities of test samples and chemical products, making it well suited to routine application in laboratories and industrial environments. [ABSTRACT FROM AUTHOR]

In connection with the requirements of international and national organizations to comply with ethical principles for experiments using animals, alternative test systems are being sought and tested to replace animals in ecological, toxicological, and genotoxicological studies. One such alternative may be the nematode Caenorhabditis elegans, which has a biotransformation system of chemical compounds similar to the mammalian system. The genotoxicity of the pesticide paraquat and the antibacterial agent furacilin was studied on C. elegans by horizontal gel electrophoresis of total DNA in order to assess its integrity. It has been shown that paraquat in concentrations of 0.01 to 0.05 mol/L and furacilin in concentrations of 0.0001 and 0.00025 mol/L caused DNA breaks in nematode cells. The antioxidant N-acetylcysteine at a concentration of 0.01 mol/L reduced the genotoxicity of both compounds. [ABSTRACT FROM AUTHOR]

Microalgae are unicellular, photosynthetic organisms in aquatic environments and are sensitive to water quality and contaminants. While green algae and diatoms are widely used for toxicity assessments, there is a relatively limited amount of toxicity data available for freshwater dinoflagellates. Here, we evaluated the sub‐lethal effects of the metals Cu, Cr, Ni, and Zn and the herbicides atrazine and S‐metolachlor on the freshwater dinoflagellate Palatinus apiculatus. Based on the 72‐h median effective concentration (EC50), P. apiculatus showed sensitive responses to metals in the order of Cu (0.052 mg L−1), Cr (0.085 mg L−1), Zn (0.098 mg L−1), and Ni (0.13 mg L−1). Among the tested herbicides, P. apiculatus was more sensitive to atrazine (0.0048 mg L−1) than S‐metolachlor (0.062 mg L−1). In addition, we observed morphological alterations and significant increases in reactive oxygen species (ROS) production in cells exposed to 0.05 mg L−1 of Cu and 0.005 mg L−1 of atrazine. These indicated that metals and pesticides induced oxidative stress in cellular metabolic processes and consequently caused severe physiological damage to the cells. Our results provide baseline data on the toxic effects of typical environmental contaminants on freshwater dinoflagellate, suggesting that P. apiculatus could be used as a bioindicator in freshwater toxicity assessments. Practitioner Points: The sub‐lethal effects of metals and pesticides on the freshwater dinoflagellate Palatinus apiculatus were evaluated.Palatinus sensitively responded to metals and pesticides; of test chemicals, atrazine (0.0048 mg L−1 of EC50) was the most sensitive.Metals and pesticides induced oxidative stress and consequently caused severe physiological damage to the Palatinus cells.The freshwater dinoflagellate Palatinus can be used as a bioindicator in freshwater toxicity assessments. [ABSTRACT FROM AUTHOR]

Because of their topical application in patients and meaningful UV/VIS absorptive properties, the degradation and potential toxicity under irradiation of diflunisal (DIF) and naphazoline (NAF) were studied. In addition, the impact of pH on their photostability was examined, showing the highest degradation of acidic DIF at pH 1 and 13 and the highest degradation of basic NAF at pH below 7. An LC–UV analysis and chemical tests showed the first-order kinetics for their degradation and generation of reactive oxygen species (ROS). A UPLC-HRMS/MS analysis allowed us to identify four degradants of DIF (from DD-1 to DD-4) and six degradants of NAF (from ND-1 to ND-6). When Toxtree software was used, a high class III of toxicity was observed for DD-2, DD-3, and DD-4, and for all the NAF degradants. Furthermore, the ND-2 product, i.e., 2-[(1-methylnaphthalen-2-yl)methyl]-4,5-dihydro-1H-imidazole, was shown to present medium mutagenic and high tumorigenic effects according to OSIRIS Property Explorer. In addition, two in vitro tests on BALB/c 3T3 mouse fibroblasts showed a phototoxic effect of DIF and NAF at the lowest concentrations tested, i.e., 5 µg/mL. Thus, our present results could be useful to design further phototoxicity studies for DIF and NAF to minimize the risk of phototoxicity due to their photodegradation. [ABSTRACT FROM AUTHOR]

Early brain development depends on adequate transport of thyroid hormones (THs) from the maternal circulation to the fetus. To reach the fetal brain, THs have to cross several physiological barriers, including the placenta, blood–brain-barrier and blood–cerebrospinal fluid-barrier. Transport across these barriers is facilitated by thyroid hormone transmembrane transporters (THTMTs). Some endocrine disrupting chemicals (EDCs) can interfere with the transport of THs by THTMTs. To screen chemicals for their capacity to disrupt THTMT facilitated TH transport, in vitro screening assays are required. In this study, we developed assays for two THTMTs, organic anion transporter polypeptide 1C1 (OATP1C1) and organic anion transporter 4 (OAT4), both known to play a role in the transport of THs across barriers. We used overexpressing cell models for both OATP1C1 and OAT4, which showed an increased uptake of radiolabeled T4 compared to control cell lines. Using these models, we screened various reference and environmental chemicals for their ability to inhibit T4 uptake by OATP1C1 and OAT4. Tetrabromobisphenol A (TBBPA) was identified as an OATP1C1 inhibitor, more potent than any of the reference chemicals tested. Additionally perfluorooctanesulfonic acid (PFOS), perfluoroctanic acid (PFOA), pentachlorophenol and quercetin were identified as OATP1C1 inhibitors in a similar range of potency to the reference chemicals tested. Bromosulfophthalein, TBBPA, PFOA and PFOS were identified as potent OAT4 inhibitors. These results demonstrate that EDCs commonly found in our environment can disrupt TH transport by THTMTs, and contribute to the identification of molecular mechanisms underlying TH system disruption chemicals. [ABSTRACT FROM AUTHOR]

Water is the most important basic need for sustaining life, and groundwater remains the primary source of this need in the coastal area of Semarang City. This indicates that the recharge of the source must be monitored as an important part of water resource management. Therefore, this study aimed to determine the origin of groundwater through the analysis of stable isotopes 18O and ²H, as well as the calculation of the sodium adsorption ratio (SAR) in Semarang City. The purpose is to determine the origin of deep wells and the quality of water for irrigation. The methods used in this study included hydrogeological mapping, testing groundwater samples, and the analysis of stable isotopes 18O and ²H. Semarang City was located in an area with geological components, including the Alluvium and Damar Formation, as well as geological structures such as rectification. Chemical parameter testing was carried out by comparing the SAR aspect of 30 samples with their electrical conductivity (EC). From the analysis of stable isotopes 18O and ²H, most of the samples were obtained from deep groundwater, while 1 was found in shallow aquifers. Furthermore, the stable isotope composition of 29 samples still followed the Global Meteoric Water Line (GMWL), indicating that they were obtained from global rainwater and had experienced mixing. [ABSTRACT FROM AUTHOR]

Tire and road wear particles (TRWP) contain complex mixtures of chemicals and release them to the environment, and potential toxic effects of these chemicals still need to be characterized. We used a standardized surrogate for TRWP, cryogenically milled tire tread (CMTT), to isolate and evaluate effects of tire‐associated chemicals. We examined organic chemical mixtures extracted and leached from CMTT for the toxicity endpoints genotoxicity, estrogenicity, and inhibition of bacterial luminescence. The bioassays were performed after chromatographic separation on high‐performance thin‐layer chromatography (HPTLC) plates. Extracts of CMTT were active in all three HPTLC bioassays with two estrogenic zones, two genotoxic zones, and two zones inhibiting bacterial luminescence. Extracts of CMTT artificially aged with thermooxidation were equally bioactive in each HPTLC bioassay. Two types of aqueous leachates of unaged CMTT, simulating either digestion by fish or contact with sediment and water, contained estrogenic chemicals and inhibitors of bacterial luminescence with similar profiles to those of CMTT extracts. Of 11 tested tire‐associated chemicals, two were estrogenic, three were genotoxic, and several inhibited bacterial luminescence. 1,3‐Diphenylguanidine, transformation products of N‐(1,3‐dimethylbutyl)‐N′‐phenyl‐p‐phenylenediamine, and benzothiazoles were especially implicated through comparison to HPTLC retention factors in the CMTT samples. Other bioactive bands in CMTT samples did not correspond to any target chemicals. Tire particles clearly contain and can leach complex mixtures of toxic chemicals to the environment. Although some known chemicals contribute to estrogenic, genotoxic, and antibacterial hazards, unidentified toxic chemicals are still present and deserve further investigation. Overall, our study expands the understanding of potential adverse effects from tire particles and helps improve the link between those effects and the responsible chemicals. Environ Toxicol Chem 2024;43:1962–1972. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]

Effect concentrations of ammonia, nickel, sodium chloride, and potassium chloride from short‐term 7‐day tests were compared to those from standard chronic 28‐day toxicity tests with juvenile mussels (fatmucket, Lampsilis siliquoidea) to evaluate the sensitivities of the 7‐day tests. The effect concentrations for nickel (59 µg Ni/L), chloride (316–519 mg Cl/L, a range from multiple tests), and potassium (15 mg K/L) obtained from the 7‐day tests were within a range of effect concentrations for each corresponding chemical in the 28‐day tests (41–91 µg Ni/L, 251–>676 mg Cl/L, 15–23 mg K/L), whereas the 7‐day ammonia effect concentration (0.40 mg/L total ammonia nitrogen; TAN) was up to 3.3‐fold greater than the 28‐day effect concentrations (0.12–0.36 mg TAN/L) but with overlapped 95% confidence limits. These results indicate that the 7‐day tests produced similar estimates compared to the 28‐day tests. Further studies are needed to evaluate the 7‐day test sensitivity using additional chemicals with different modes of toxic action. Environ Toxicol Chem 2024;43:2020–2025. Published 2024. This article is a U.S. Government work and is in the public domain in the USA. [ABSTRACT FROM AUTHOR]

Globally, there is a move towards using local, native species for ecotoxicological risk assessments. Anthropogenic stressors from urban, agricultural, and industrial activities can impact the health of receiving ecosystems. Biomarkers can provide valuable insights as early warning signals of the potential environmental impacts of stressors. The aim of this study was to develop biomarkers in the green-lipped mussel (Perna canaliculus), a potential bioindicator of environmental health for coastal marine ecosystems in New Zealand. Reverse transcription quantitative polymerase chain reaction (RT-qPCR) assays targeting the expression of genes involved in oxidative stress, xenobiotic transfer, membrane transportation, cellular and DNA response/repair, and endocrine disruption were developed and validated for P. canaliculus. We found significant modulation of genes associated with oxidative stress, xenobiotic transfer, membrane transport, endocrine disruption, and genotoxicity in P. canaliculus following 48-hour exposures to copper and benzo[α]pyrene. These results demonstrate the potential of P. canaliculus as a bioindicator species for environmental risk assessment. The gene expression assays showed potential as early indicators of exposure to the chemicals tested but require additional validation to assess their ability to predict effects at higher levels of biological organisation. [ABSTRACT FROM AUTHOR]

Application of hydraulic fracturing to produce "unconventional" oil and gas from shale formations and other low-permeability geological units has raised concerns about the potential environmental impacts, including potential adverse effects of fracturing fluids (FF) on groundwater. In this study, laboratory batch test experiments and new analytical methods were developed to analyze FF chemicals as potential indicators (tracers) to detect impacts of fracturing fluids on groundwater. The tests, conducted over 101–196 days, included FF with synthetic chemicals (~40,000–4,000,000 µg/L), placed in batches with groundwater and sediment at 5° and 25 °C, along with sterile controls. Using the new methods, measurable concentrations of the FF chemicals were many orders in magnitude lower (~3000 to 3,000,000 X) compared to their concentrations in synthetic fracturing fluids, indicating that these chemicals are excellent candidates as indicators of FF contamination in groundwater, if they are relatively persistent, and not prone to extensive loss by sorption during migration in the subsurface. Variable sorption and degradation of the chemicals was observed in both batch and column tests. Sorption was negligible (sorption coefficient, Kd~0.0) for some synthetic chemicals (polyethylene glycol, ethanolamines, isopropanol, and ethyl hexanol) in some tests. At the other extreme, strong sorption was observed for some of the higher molecular weight cocamido propyl betaine (max Kd = 1.17) and polyethylene glycol (max Kd = 1.12) components, and triethanolamine (max Kd = 0.47) in other tests. Apparent loss by degradation was observed for each chemical in some tests, but negligible in others. The shortest apparent half-lives were for isopropanol and ethyl hexanol at 25 °C (t½ < 11 days), and the most persistent synthetic chemicals were polyethylene glycols (t½ ≥ 182 d) and the ethanolamines (t½ ≥ 212 d). Of the potentially diagnostic FF chemicals investigated, the relatively hydrophilic and persistent lower molecular weight polyethylene glycols are some of the most promising as potential indicators of contamination of groundwater by FF. [ABSTRACT FROM AUTHOR]

The aim of the study was to evaluate changes in the degree of C=C conversion (DC%), chemical structure, optical properties and roughness of one-shade composites before/after photoaging. Τhe one-shade materials tested were Charisma Topaz One (CHT), Clearfil Majesty ES-2 Universal (MES), Essentia Universal (ESU) and Omnichroma (OMN), with G-aenial Anterior (CNA) serving as control. Specimens (2 mm thickness) were prepared and tested for DC% and chemical structure (ATR–FTIR spectroscopy), optical properties (L*a*b*–ΔΕ, translucency parameter–TP, opalescence parameter–OP, contrast ratio–CR and total transmittance–TT by UV–Vis spectroscopy) and roughness (Sa, Sz, Sdr, Sds and Sc by optical profilometry) before and after photoaging (Xe-arc weatherometer). Significant differences were found in DC% between top–bottom surfaces (ESU, OMN before; ESU, CNA after). Photoaging improved DC%, reduced ester peaks implying photodegradation, reduced L* (CHT, OMN, CNA), a* (CHT, CNA), b* (OMN, CNA), TP (all, except for MES), OP (only MES), CR (only MES, but an increase in CNA) and TT (CHT, OMN). OMN, CNA and MES demonstrated ΔΕ > 3.3. Photoaging significantly increased all roughness parameters in all materials, except for MES (Sz, Sdr, Sc) and OMN (Sdr). Although listed in the same group, significant differences were found in one-shade composites before and after photoaging. Several products were strongly affected by photoaging, demonstrating evidence of photodegradation, an increased roughness and color changes exceeding the clinically acceptable levels. [ABSTRACT FROM AUTHOR]

This article compares chemical coagulation with electrocoagulation, two popular methods for the primary treatment of wastewater generated in the process of underground coal gasification (UCG). The primary aim was to determine which method is more effective in the removal of cyanide and sulphide ions, metals and metalloids, as well as organic compounds. In both cases, experiments were conducted in batch 1 dm3 reactors and using iron ions. Four types of coagulants were tested during the chemical coagulation study: FeCl2, FeSO4, Fe2(SO4)3, and FeCl3. In the electrocoagulation experiments, pure iron Armco steel was used to manufacture the sacrificial iron anode. Both processes were tested under a wide range of operating conditions (pH, time, Fe dose) to determine their maximum efficiency for treating UCG wastewater. It was found that, through electrocoagulation, a dose as low as 60 mg Fe/dm3 leads to >60% cyanide reduction and >98% sulphide removal efficiency, while for chemical coagulation, even a dose of 307 mg Fe/dm3 did not achieve more than 24% cyanide ion removal. Moreover, industrial chemical coagulants, especially when used in very high doses, can be a substantial source of cross-contamination with trace elements. [ABSTRACT FROM AUTHOR]

The interest in the quality control of the raw materials, intermediates, and final products, as well as production methods, of beer has increased significantly in recent decades due to the needs and expectations of consumers. Increasing in the industrialization and globalization of beer supply chains led to a need for novel analytical tools suitable for the rapid and reliable characterization of the materials involved. In this study, an ultracompact instrument operating in the NIR region of the spectrum, microNIR, was tested for the chemical investigation of barley malts. The essential raw materials for brewing require careful control since they deeply affect the characteristic flavor and taste of the final products. Therefore, a robust prediction model able to classify base and specialty barley malts was developed starting from NIR measurements. Soft Independent Class Analogy (SIMCA) was selected as the chemometric technique for the optimization of two prediction models, and ground and sieved materials were investigated using spectroscopy. The microNIR/chemometric approach proposed in this study permitted the correct prediction of the malt samples included in the external validation set, providing false positive and false negative rates no higher than 3.41% and 0.25%, respectively, and confirming the feasibility of the novel analytical platform. [ABSTRACT FROM AUTHOR]

Airborne particulate pollution, which contains heavy metals (HMs) among other contaminants, is associated with many health effects related to respiratory problems, such as cardiopulmonary lesions and systemic diffusion. This study aimed to evaluate the levels of HMs contamination using different plants and monitors, as well as to evaluate the relationship between HMs content and magnetic properties in leaves of different types of biomonitors. For analysis, 180 samples were taken from biomonitors; Cupressus lusitanica (Cupressaceae), Citrus (Rutaceae), and Ficus benjamina (Moraceae), and monitors (road dust, surface and, deep soil). Seven HMs were measured: Cu, Pb, Ni, Cr, Fe, V, and Zn in all samples. Specific susceptibility (χlf), and isothermal remanent magnetization curves (IRM) were assessed in biomonitors samples. The results revealed that the major biomonitor was C. lusitanica, which also showed the highest χlf (20.54 × 10–8 m3/kg) and IRM (2.66 mAm2/kg). Additionally, given the low coercivity of the magnetic material found in the χlf and SIRM values, those magnetic properties can be used interchangeably to determine the magnetic minerals in the biomonitors studied. We conclude that the use of biomonitors and monitors presents a potential to be used as an alternative method for contaminant monitoring and the use of magnetic properties is feasible to measure air pollution. [ABSTRACT FROM AUTHOR]

The fruit fly, Drosophila melanogaster, is an experimentally tractable model system that has recently emerged as a powerful "new approach methodology" (NAM) for chemical safety testing. As oogenesis is well conserved at the molecular and cellular level, measurements of Drosophila fecundity can be useful for identifying chemicals that affect reproductive health across species. However, standard Drosophila fecundity assays have been difficult to perform in a high-throughput manner because experimental factors such as the physiological state of the flies and environmental cues must be carefully controlled to achieve consistent results. In addition, exposing flies to a large number of different experimental conditions (such as chemical additives in the diet) and manually counting the number of eggs laid to determine the impact on fecundity is time-consuming. We have overcome these challenges by combining a new multiwell fly culture strategy with a novel 3D-printed fly transfer device to rapidly and accurately transfer flies from one plate to another, the RoboCam, a low-cost, custom-built robotic camera to capture images of the wells automatically, and an image segmentation pipeline to automatically identify and quantify eggs. We show that this method is compatible with robust and consistent egg laying throughout the assay period and demonstrate that the automated pipeline for quantifying fecundity is very accurate (r2 = 0.98 for the correlation between the automated egg counts and the ground truth). In addition, we show that this method can be used to efficiently detect the effects on fecundity induced by dietary exposure to chemicals. Taken together, this strategy substantially increases the efficiency and reproducibility of high-throughput egg-laying assays that require exposing flies to multiple different media conditions. [ABSTRACT FROM AUTHOR]

Recently, there has been a strong interest in nanoparticles (NPs) and their use in a wide range of food applications due to their possession of a set of unique physical and chemical properties. In this work, the nanoformulation was synthesized by coating Fe Ion and Zahdi date pit powder (ZDP) by whey protein. This nanosystem was functionalized by folic acid (FA) molecules. The physiochemical characteristics of WPI@Fe-ZDP-FA nanocomposite were evaluated and confirmed by dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and radical scavenging activity using DPPH methods. These NPs were added to skim milk and yogurt was produced from it. The effects of this addition on the chemical, physical and sensory properties of yogurt were studied during storage at 5∘C for 28 days. The prepared nanocomposite was used in proportions of 0.25%, 0.5% and 0.75%, respectively. The chemical tests included measuring the percentage of moisture, protein, carbohydrates, fat, and ash, in addition to the total acidity and pH, while the rheological tests included hardness, cohesion and flexibility. A sensory evaluation of the curd parameters was also performed. The curd treatments to which the nanocomposite was added showed a decrease in the level of moisture over the length of the storage period and an increase in the percentage of protein, carbohydrates and ash compared to the control sample that was without the addition. As for the rheological tests, there was a discrepancy in the results of the treatments when compared to the control treatment, as the addition of 0.25% has higher characteristics than all other treatments, especially in the ability to retain water and spontaneous whey excretion. It was more acceptable in terms that the novel WPI@Fe-ZDP-FA nanoformulation greatly improved the characteristics of texture, taste and flavor in yogurt. [ABSTRACT FROM AUTHOR]

Poly (O-anisidine) composites are a class of advanced materials that combine the properties of POA and other materials to produce a product with unique characteristics. Here, chemical oxidation polymerization was carried out to synthesize the plain POA and its three composite materials, namely POA-chitosan, POA-chitosan-curcumin, and POA-chitosan-curcumin-chloroaniline. Various characterization methods such as FTIR, XRD, and SEM were used to access the final properties and end groups of the prepared samples. For the coating application, epoxy resin was used along with hardener (Replamide 340) and applied to the mild steel panels. The coating is made by reinforcement of 2 and 4% (w/w) of formulation. The applied coating is tested by TGA, anticorrosion, and mechanical testing. Two anticorrosion tests, namely the salt spray test and EIS, were executed. Multifarious mechanical testing along with chemical and solvents resistance tests were completed with satisfactory results. Composite material's coat gives admirable results when compared with plain epoxy. All the formulations showed good adhesion on the metal substrate. Among all the formulations, POA-chitosan-curcumin-chloroaniline composite (2%) gives the best anticorrosive properties, i.e., sustains well in a corrosive environment. Along with this, it gives good scratch hardness (1.8 kg) as compared to plain epoxy coating (1.2 kg). [ABSTRACT FROM AUTHOR]

Gd 2 Zr 2 O 7 is considered a promising host material for immobilizing high-level radioactive waste. However, its interplay between grain sizes, radiation resistance and chemical stability is not well understood yet. Herein, Gd 1.7 Nd 0.3 Zr 0.5 Ce 1.5 O 7 ceramics with defect-fluorite phase and three different grain sizes (96, 390 and 1959 nm) were successfully fabricated and irradiated by 140 keV He ion beam up to a fluence of 8 × 1017 ions/cm2. Phase evolutions, microstructure changes and chemical stabilities were investigated. The nano-grained ceramic exhibits the lowest degree of amorphization and a delayed irradiation-induced lattice expansion and damage evolution process, demonstrating an enhanced ability in suppressing the coalescence of He bubbles inside the grain. Grain boundaries parallel to the surface were found to be more favorable sinks for irradiation-induced defects. Chemical stability tests showed that the 42 days leaching rates of all elements were between 10−7∼10−5 g/m2·d. All samples have maintained this superior chemical stability even after irradiation. Interestingly, the leaching test results also suggested that grain size may be not the primary factor influencing the long-term leaching rate. [ABSTRACT FROM AUTHOR]

For buckwheat, the optimal harvest period is difficult to determine—too early or too late a harvest affects the nutritional quality of buckwheat. In this paper, physical and chemical tests are combined with a method using near-infrared spectroscopy nondestructive testing technology to study buckwheat harvest and determine the optimal harvest period. Physical and chemical tests to determine the growth cycle were performed at 83 days, 90 days, 93 days, 96 days, 99 days, and 102 days, in which the buckwheat grain starch, fat, protein, total flavonoid, and total phenol contents were assessed. Spectral images of buckwheat in six different harvest periods were collected using a near-infrared spectral imaging system. Four preprocessing methods (SNV, S-G, DWT, and the normaliz function) and three dimensionality reduction algorithms (IVSO, VCPA, VISSA) were used to process the raw buckwheat spectral data, and the full and eigen spectra were established as a random forest (RF). Random forest (RF) and Least Squares Support Vector Machine (LS-SVM) classification models were used to determine the full and eigen spectra, respectively, and the optimal model for the buckwheat single harvest period was determined and validated. Through physical and chemical tests, it was concluded that the 90-day harvest buckwheat grain protein, fat, and starch contents were the highest, and that the total flavonoid and total phenolic contents were also high. The SNV preprocessing method was the most effective, and the feature bands extracted using the IVSO algorithm were more representative. The IVSO-RF model was the best discriminative model for the classification of buckwheat in different harvest periods, with the correct rates of the training and prediction sets reaching 100% and 96.67%, respectively. When applying the IVSO-RF model to the buckwheat single harvest period to verify the classification, the correct rate of the training set for each harvest period reached 96%, and that of the prediction set reached 100%. Near-infrared spectroscopy combined with the IVSO-RF modeling method for buckwheat harvest period detection is a rapid, nondestructive classification method. When this was combined with physical and chemical analyses, it was determined that a growth cycle of 90 days is the best harvest period for buckwheat. The results of this study can not only improve the quality of buckwheat crops but also be applied to other crops to determine their optimal harvest period. [ABSTRACT FROM AUTHOR]

Objective Clarify the reasons for the leakage and failure of the gas-gathering pipeline welds on an active shale gas platform in Sichuan. Methods Failure analysis of welds is conducted based on macroscopic morphology analysis, non-destructive testing, physical and chemical performance testing, metallographic structure analysis, and microscopic analysis of the weld area. Results There are many defects in the pipe section specimen, such as excessive welding reinforcement, undercut, overlap, and misalignment, which may lead to stress concentration in the welding area; prior to welding construction, due to weather conditions, a large amount of water containing rusts are easily generated on the inner wall and groove area of the pipeline. During welding, these rusts may enter the deposited metal, causing excessive hydrogen content in the weld zone diffusion and increasing sensitivity to hydrogen-induced cracking at the welded joint. Conclusions Hydrogen induced cracking (HIC) in the weld seam area occurs under the combined influence of the external environment, stress concentration of pipeline welds, and excessive hydrogen content in the weld area, a large number of HIC microcracks intermittently merging to form macroscopic cracking failure. [ABSTRACT FROM AUTHOR]

This article discusses the use of glucocorticoids (GCs) in the treatment of autoimmune and inflammatory disorders. Despite their effectiveness, even low-dose GCs can increase the risk of various complications, including cardiovascular disease, severe infections, hypertension, diabetes, osteoporosis, and overall mortality. The article provides recommendations for the management of GC therapy, including patient education, tapering regimens, diagnosing GC-induced adrenal insufficiency (GIAI), and managing adrenal crisis. It also highlights the need for further research to better understand the risks and effects of GIAI and to develop improved diagnostic tests and treatment options. [Extracted from the article]

This article discusses the use of filamentous fungi as industrial strains for the production of high-value compounds. Filamentous fungi, such as Aspergillus oryzae and Trametes versicolor, have shown great potential in synthesizing secondary metabolites, producing proteins, and enhancing enzyme production. Genetic engineering and genome editing have played a significant role in developing efficient production strains. The article also explores strategies for the development of fungal biofactories, including classical and recent methods for strain improvement. Additionally, the role of -omics technologies in understanding fungal biology and optimizing fungal strains for specific industrial applications is discussed. Overall, the article highlights the efforts of the scientific community to develop sustainable filamentous fungal strains for industrial purposes. [Extracted from the article]

The volcanism that took place during the Neogene in the southeastern Iberian Peninsula caused a large accumulation of volcanosedimentary materials, which were subsequently altered and transformed into bentonite deposits. The mineral composition and technical quality of these deposits have been demonstrated and established in this work. The main object of this research is the mineral, chemical and thermal characterization of the bentonites that lie in the southeastern region of Spain and to demonstrate their technical capabilities to be used as pozzolans. The first phase of characterization of the samples was carried out by X-ray diffraction (XRD), oriented aggregates (OAs), X-ray fluorescence (XRF) and thermogravimetric analysis (TGA). In the second phase, a chemical–technical quality test (CTQT) was carried out, aimed at determining reactive SiO2 and reactive CaO, whereas in the third phase, a chemical pozzolanicity test (CPT) was carried out to establish the pozzolanic behavior of the samples over two test periods: 8 and 15 days. The XRD and OA analyses showed that the bentonite samples are made up of a main phase formed by montmorillonite, quartz, plagioclase-albite and chabazite–Ca. The results obtained by XRF on the bentonite samples indicated that the SiO2 contents are high and vary between 43.33% and 64.71%, while Al2O3 ranges between 15.81% and 17.49%. The CTQT established that more than 80% of the SiO2 and CaO present in the samples are reactive, which was confirmed by the results of the chemical pozzolanicity test (CPT). The results obtained show that the bentonites in this study present technical qualities that are undoubtedly reinforced by their mineral constitution and chemical composition. These tests could become a practical guide for the selection of eco-efficient materials in the production of pozzolanic cements and environmentally friendly ceramic products. [ABSTRACT FROM AUTHOR]

Copyright of Forensic Science & Technology is the property of Institute of Forensic Science, Ministry of Public Security and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In vitro toxicology research has accelerated with the use of in silico, computational approaches and human in vitro tissue systems, facilitating major improvements evaluating the safety and health risks of novel consumer products. Innovation in molecular and cellular biology has shifted testing paradigms, with less reliance on low-throughput animal data and greater use of medium- and high-throughput in vitro cellular screening approaches. These new approach methodologies (NAMs) are being implemented in other industry sectors for chemical testing, screening candidate drugs and prototype consumer products, driven by the need for reliable, human-relevant approaches. Routine toxicological methods are largely unchanged since development over 50 years ago, using high-doses and often employing in vivo testing. Several disadvantages are encountered conducting or extrapolating data from animal studies due to differences in metabolism or exposure. The last decade saw considerable advancement in the development of in vitro tools and capabilities, and the challenges of the next decade will be integrating these platforms into applied product testing and acceptance by regulatory bodies. Governmental and validation agencies have launched and applied frameworks and "roadmaps" to support agile validation and acceptance of NAMs. Next-generation tobacco and nicotine products (NGPs) have the potential to offer reduced risks to smokers compared to cigarettes. These include heated tobacco products (HTPs) that heat but do not burn tobacco; vapor products also termed electronic nicotine delivery systems (ENDS), that heat an e-liquid to produce an inhalable aerosol; oral smokeless tobacco products (e.g., Swedish-style snus) and tobacco-free oral nicotine pouches. With the increased availability of NGPs and the requirement of scientific studies to support regulatory approval, NAMs approaches can supplement the assessment of NGPs. This review explores how NAMs can be applied to assess NGPs, highlighting key considerations, including the use of appropriate in vitro model systems, deploying screening approaches for hazard identification, and the importance of test article characterization. The importance and opportunity for fit-for-purpose testing and method standardization are discussed, highlighting the value of industry and cross-industry collaborations. Supporting the development of methods that are accepted by regulatory bodies could lead to the implementation of NAMs for tobacco and nicotine NGP testing. [ABSTRACT FROM AUTHOR]

This article presents the results of research on the growth kinetics, microstructure (SEM/EDS/XRD), and corrosion behavior of Zn-5Al coatings obtained using a high-temperature hot dip process on B500B reinforcing steel. The corrosion resistance of the coatings was determined using the neutral salt spray (NSS) test (EN ISO 9227). Based on chemical composition tests in micro-areas (EDS) and phase composition tests (XRD), corrosion products formed on the coating surface after exposure to a corrosive environment containing chlorides were identified. In the outer layer of the coating, areas rich in Zn and Al were found, which were solid solutions of Al in Zn (α), while the diffusion layer was formed by a layer of Fe(Al,Zn)3 intermetallics. The growth kinetics of the coatings indicate the sequential growth of the diffusion layer, controlled by diffusion in the initial phase of growth, and the formation of a periodic layered structure with a longer immersion time. The NSS test showed an improved corrosion resistance of reinforcing bars with Zn-5Al coatings compared to a conventional hot-dip-galvanized zinc coating. The increase in corrosion resistance was caused by the formation of beneficial corrosion products: layered double hydroxides (LDH) based on Zn2+ and Al3+ cations and Cl− anions and simonkolleite—Zn5(OH)8Cl2·H2O. [ABSTRACT FROM AUTHOR]

Femtosecond laser processing significantly alters the surface structure and chemical composition, impacting its wetting properties. Post-treatments such as immersion in a hydrocarbon liquid (petrol) or storage in a vacuum can significantly reduce ice adhesion, making the surfaces interesting for anti-ice applications. This study investigates their durability against acetone, ethylene glycol, and UV radiation. The laser-structured surfaces were immersed in the respective liquids for up to 48 h. The results indicate limited durability of the superhydrophobic and icephobic layers when submerged in acetone and ethylene glycol, with more favorable results for petrol treatment than vacuum treatment. Similar results were obtained after 100 h of UV exposure, showing a decrease in superhydrophobic properties and an increase in ice adhesion. However, repeated vacuum treatments conducted after the chemical durability tests revealed the potential for partial recovery of the hydrophobic and icephobic properties. XPS analysis was performed throughout the experiments to evaluate changes in surface chemistry resulting from the post-laser treatments and the durability tests. [ABSTRACT FROM AUTHOR]