Search

We present the first visual orbit for the nitrogen-rich Wolf-Rayet binary, WR 133 (WN5o + O9I) based on observations made with the CHARA Array and the MIRC-X combiner. This orbit represents the first visual orbit for a WN star and only the third Wolf-Rayet star with a visual orbit. The orbit has a period of 112.8 d, a moderate eccentricity of 0.36, and a separation of $a$= 0.79 mas on the sky. We combine the visual orbit with an SB2 orbit and Gaia parallax to find that the derived masses of the component stars are $M_{\rm WR}$ = $9.3\pm1.6 M_\odot$ and $M_{\rm O}$ = $22.6\pm 3.2 M_\odot$, with the large errors owing to the nearly face-on geometry of the system combined with errors in the spectroscopic parameters. We also derive an orbital parallax that is identical to the {\it Gaia}-determined distance. We present a preliminary spectral analysis and atmosphere models of the component stars, and find the mass-loss rate in agreement with polarization variability and our orbit. However, the derived masses are low compared to the spectral types and spectral model. Given the close binary nature, we suspect that WR 133 should have formed through binary interactions, and represents an ideal target for testing evolutionary models given its membership in the cluster NGC 6871., Accepted to ApJ Letters

We present updated orbital elements for the Wolf-Rayet (WR) binary WR\,140 (HD\,193793; WC7pd + O5.5fc). The new orbital elements were derived using previously published measurements along with {\color{black}160} new radial velocity measurements across the 2016 periastron passage of WR 140. Additionally, four new measurements of the orbital astrometry were collected with the CHARA Array. With these measurements, we derive stellar masses of $M_{\rm WR} = 10.31\pm0.45 M_\odot$ and $M_{\rm O} = 29.27\pm1.14 M_{\odot}$. We also include a discussion of the evolutionary history of this system from the Binary Population and Spectral Synthesis (BPASS) model grid to show that this WR star likely formed primarily through mass loss in the stellar winds, with only a moderate amount of mass lost or transferred through binary interactions., 10 pages, 5 figures

MIRC-X is a six telescope beam combiner at the CHARA array that works in J and H wavelength bands and provides an angular resolution equivalent to a $B$=331m diameter telescope. The legacy MIRC combiner has delivered outstanding results in the fields of stellar astrophysics and binaries. However, we required higher sensitivity to make ambitious scientific measurements of faint targets such as young stellar objects, binary systems with exoplanets, and active galactic nuclei. For that purpose, MIRC-X is built and is offered to the community since mid-2017. MIRC-X has demonstrated up to two magnitudes of improved faint magnitude sensitivity with the best-case H

The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adaptive optics are developed to correct atmospheric turbulence and non-common path aberrations between each telescope and the beam combiner lab. This paper describes the AO software and its integration into the CHARA system. We also report initial on-sky tests that demonstrate an increase of scientific throughput by sensitivity gain and by extending useful observing time in worse seeing conditions. Our 6 telescopes and 12 AO systems with tens of critical alignments and control loops pose challenges in operation. We describe our methods enabling a single scientist to operate the entire system., Comment: SPIE, Optical and Infrared Interferometry and Imaging VII, Proceedings Volume 11446, 1144622, Dec 14, 2020 "See, https://doi.org/10.1117/12.2561560"

The CHARA Array is an optical/infrared interferometer that combines the light from six 1-meter telescopes. With baselines ranging from 34 to 331 meters, CHARA provides sub-milliarcsecond resolution to measure stellar diameters, image stellar surfaces, resolve close binary companions, and study circumstellar environments. In this paper, we present recent highlights from the CHARA Array, focusing on the implementation of adaptive optics, the ongoing development of next generation beam combiners, an update on the community access program, and a discussion about future developments.

In this contribution we report on our work to increase the spectral range of the Michigan Infrared Combiner- eXeter (MIRC-X) instrument at the CHARA array to allow for dual H and J band interferometric observations. We comment on the key science drivers behind this project and the methods of characterisation and correction of instrumental birefringence and dispersion. In addition, we report on the first results from on-sky commissioning in November 2019.

Long-baseline optical interferometry has provided a method with which stars are not only resolved, but directly imaged. Resolving features on stellar surfaces is becoming routine for observers using the Center for High Angular Resolution Astronomy (CHARA) Array or the Very Large Telescope Interferometer (VLTI), in particular. The CHARA Array presently has six 1-m telescopes at permanent locations with baselines ranging from 34-331 m.1 Currently for imaging, the six CHARA Array telescopes are combined with the Michigan InfraRed Combiner-eXeter (MIRC-X; formerly the Michigan Infrared Combiner, MIRC).2 Working in H- and J -bands, MIRC-X provides an angular resolution of θH ∼ 0.5 mas and θJ ∼ 0.4 mas, respectively. Four telescopes at a time can be combined at VLTI, either the 8.2-m Unit Telescopes (UTs) or the 1.8-m Auxiliary Telescopes (ATs). The ATs can be moved to provide multiple configurations to increase the possible baselines (up to 130 m). The Precision Integrated-Optics Near-Infrared Imaging ExpeRiment (PIONIER),3 which operates in H-band (θH ∼ 1.3 mas), is the current beam combiner frequently used for imaging. In the following sections, the types of stars imaged by long-baseline optical interferometry will be discussed with significant astrophysical results highlighted.

Benchmark stars are crucial as validating standards for current as well as future large stellar surveys of the Milky Way. However, the number of suitable metal-poor benchmarks is currently limited. We aim to construct a new set of metal-poor benchmarks, based on reliable interferometric effective temperature ($T_\text{eff}$) determinations and a homogeneous analysis with a desired precision of $1\%$ in $T_\text{eff}$. We observed ten late-type metal-poor dwarf and giants: HD2665, HD6755, HD6833, HD103095, HD122563, HD127243, HD140283, HD175305, HD221170, and HD224930. Only three of the ten stars (HD103095, HD122563, and HD140283) have previously been used as benchmarks. For the observations, we used the high angular resolution optical interferometric instrument PAVO at the CHARA array. We modelled angular diameters using 3D limb darkening models and determined $T_\text{eff}$ directly from the Stefan-Boltzmann relation, with an iterative procedure to interpolate over tables of bolometric corrections. Surface gravities ($\log(g)$) were estimated from comparisons to Dartmouth stellar evolution model tracks. We collected spectroscopic observations from the ELODIE and FIES spectrographs and estimated metallicities ($\mathrm{[Fe/H]}$) from a 1D non-LTE abundance analysis of unblended lines of neutral and singly ionized iron. We inferred $T_\text{eff}$ to better than $1\%$ for five of the stars (HD103095, HD122563, HD127243, HD140283, and HD224930). The $T_\text{eff}$ of the other five stars are reliable to between $2-3\%$; the higher uncertainty on the $T_\text{eff}$ for those stars is mainly due to their having a larger uncertainty in the bolometric fluxes. We also determined $\log(g)$ and $\mathrm{[Fe/H]}$ with median uncertainties of $0.03\,\mathrm{dex}$ and $0.09\,\mathrm{dex}$, respectively. These ten stars can, therefore, be adopted as a new, reliable set of metal-poor benchmarks., 13 pages, 7 figures, 8 tables + 10 online tables, abstract shortened to meet arXiv requirements, accepted in A&A

We present the visual orbits of two long period spectroscopic binary stars, HD 8374 and HD 24546, using interferometric observations acquired with the CHARA Array and the Palomar Testbed Interferometer. We also obtained new radial velocities from echelle spectra using the APO 3.5 m and Fairborn 2.0 m telescopes. By combining the visual and spectroscopic observations, we solve for the full, three-dimensional orbits and determine the stellar masses and distances to within 3% uncertainty. We then estimate the effective temperature and radius of each component star through Doppler tomography and spectral energy distribution analyses, in order to compare the observed stellar parameters to the predictions of stellar evolution models. For HD 8374, we find masses of M1 = 1.636 +/- 0.050 Msun and M2 = 1.587 +/- 0.049 Msun, radii of R1 = 1.84 +/- 0.05 Rsun and R2 = 1.66 +/- 0.12 Rsun, temperatures of Teff1 = 7280 +/- 110 K and Teff2 = 7280 +/- 120 K, and an estimated age of 1.0 Gyr. For HD 24546, we find masses of M1 = 1.434 +/- 0.014 Msun and M2 = 1.409 +/- 0.014 Msun, radii of R1 = 1.67 +/- 0.06 Rsun and R2 = 1.60 +/- 0.10 Rsun, temperatures of Teff1 = 6790 +/- 120 K and Teff2 = 6770 +/- 90 K, and an estimated age of 1.4 Gyr. HD 24546 is therefore too old to be a member of the Hyades cluster, despite its physical proximity to the group., 18 pages, 10 figures. Accepted for publication in AJ

Betelgeuse has gone through a sudden shift in its brightness and dimmed mysteriously. This is likely caused by a hot blob of plasma ejected from Betelgeuse and then cooled to obscuring dust. If true, it is a remarkable opportunity to directly witness the formation of dust around a red supergiant star. Today's optical telescope facilities are not optimized for time-evolution monitoring of the Betelgeuse surface, so in this work, we propose a low-cost optical interferometer. The facility will consist of $12 \times 4$ inch optical telescopes mounted on the surface of a large radio dish for interferometric imaging; polarization-maintaining single-mode fibers will carry the coherent beams from the individual optical telescopes to an all-in-one beam combiner. A fast steering mirror assisted fiber injection system guides the flux into fibers. A metrology system senses vibration-induced piston errors in optical fibers, and these errors are corrected using fast-steering delay lines. We will present the design., Comment: Presented at SPIE Optics+Photonics conference, 9 pages, 3 figures

We present models of the inner region of the circumstellar disk of RY Tau which aim to explain our near-infrared ($K$-band: $2.1\,\mu$m) interferometric observations while remaining consistent with the optical to near-infrared portions of the spectral energy distribution. Our sub-milliarcsecond resolution CHARA Array observations are supplemented with shorter baseline, archival data from PTI, KI and VLTI/GRAVITY and modeled using an axisymmetric Monte Carlo radiative transfer code. The $K$-band visibilities are well-fit by models incorporating a central star illuminating a disk with an inner edge shaped by dust sublimation at $0.210\pm0.005\,$au, assuming a viewing geometry adopted from millimeter interferometry ($65^{\circ}$ inclined with a disk major axis position angle of $23^{\circ}$). This sublimation radius is consistent with that expected of Silicate grains with a maximum size of $0.36-0.40\,\mu$m contributing to the opacity and is an order of magnitude further from the star than the theoretical magnetospheric truncation radius. The visibilities on the longest baselines probed by CHARA indicate that we lack a clear line-of-sight to the stellar photosphere. Instead, our analysis shows that the central star is occulted by the disk surface layers close to the sublimation rim. While we do not see direct evidence of temporal variability in our multi-epoch CHARA observations, we suggest the aperiodic photometric variability of RY~Tau is likely related temporal and/or azimuthal variations in the structure of the disk surface layers., Comment: Accepted for publication in The Astrophysical Journal

International audience; CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la Cote d’Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the required precision and sensitivity, CHARA/SPICA combines a low spectral resolution mode R = 140 in the visible and single-mode fibers fed by the AO stages of CHARA. This setup generates additional needs before the interferometric combination: the compensation of atmospheric refraction and longitudinal dispersion, and the fringe stabilization. In this paper, we present the main features of the 6-telescopes fibered visible beam combiner (SPICA-VIS) together with the first laboratory and on-sky results of the fringe tracker (SPICA-FT). We describe also the new fringe-tracker simulator developed in parallel to SPICA-FT.

We present the fabrication and characterization of 3 dB asymmetric directional couplers for the astronomical K-band at wavelengths between 2.0 and 2.4 µm. The couplers were fabricated in commercial Infrasil silica glass using an ultrafast laser operating at 1030 nm. After optimizing the fabrication parameters, the insertion losses of straight single-mode waveguides were measured to be ∼ 1.2 ± 0.5 d B across the full K-band. We investigate the development of asymmetric 3 dB directional couplers by varying the coupler interaction lengths and by varying the width of one of the waveguide cores to detune the propagation constants of the coupled modes. In this manner, we demonstrate that ultrafast laser inscription is capable of fabricating asymmetric 3 dB directional couplers for future applications in K-band stellar interferometry. Finally, we demonstrate that our couplers exhibit an interferometric fringe contrast of > 90 % . This technology paves the path for the development of a two-telescope K-band integrated optic beam combiner for interferometry to replace the existing beam combiner (MONA) in Jouvence of the Fiber Linked Unit for Recombination (JouFLU) at the Center for High Angular Resolution Astronomy (CHARA) telescope array.

In the framework of the ALOHA project (Astronomical Light Optical Hybrid Analysis), devoted to high resolution imaging in the L band, we investigate in this paper the possibility to deploy fibre links between the telescopes of the CHARA Array. As a first step, we set up an outdoor hectometric fibre interferometer to measure the vibration environment at the Mount Wilson Observatory. The optical path difference of this interferometer has been actively stabilised within an accuracy better than 4 nmrms, a stability largely sufficient for any interferometric application.

We implement an electron avalanche photodiode (e-APD) in the MIRC-X instrument, upgrade of the 6-telescope near-infrared imager MIRC, at the CHARA array. This technology should improve the sensitivity of near-infrared interferometry. We first used the classical Mean-Variance analysis to measure the system gain and the amplification gain. We then developed a physical model of the statistical distribution of the camera output signal. This model is based on multiple convolutions of the Poisson statistic, the intrinsic avalanche gain distribution, and the observed distribution of the background signal. At low flux level, this model constraints independently the incident illumination level, the total gain, and the excess noise factor of the amplification. We measure a total transmission of $48\pm3\%$ including the cold filter and the Quantum Efficiency. We measure a system gain of 0.49 ADU/e, a readout noise of $10$ ADU, and amplification gains as high as 200. These results are consistent between the two methods and therefore validate our modeling approach. The measured excess noise factor based on the modeling is $1.47\pm0.03$, with no obvious dependency with flux level or amplification gain. The presented model allows measuring the characteristics of the e-APD array at low flux level independently of preexisting calibration. With $, Comment: 13 pages, 15 figures, to be published in A&A

Constraining substellar evolutionary models (SSEMs) is particularly difficult due to a degeneracy between the mass, age, and luminosity of a brown dwarf. In cases where a brown dwarf is found as a directly imaged companion to a star, as in HD 4747 and HD 19467, the mass, age, and luminosity of the brown dwarf are determined independently, making them ideal objects to use to benchmark SSEMs. Using the Center for High Angular Resolution Astronomy Array, we measured the angular diameters and calculated the radii of the host stars HD 4747 A and HD 19467 A. After fitting their parameters to the Dartmouth Stellar Evolution Database, MESA Isochrones and Stellar Tracks, and Yonsei-Yale isochronal models, we adopt age estimates of $10.74^{+6.75}_{-6.87}$ Gyr for HD 4747 A and $10.06^{+1.16}_{-0.82}$ Gyr for HD 19467 A. Assuming the brown dwarf companions HD 4747 B and HD 19467 B have the same ages as their host stars, we show that many of the SSEMs under-predict bolometric luminosities by $\sim$ 0.75 dex for HD 4747 B and $\sim 0.5$ dex for HD 19467 B. The discrepancies in luminosity correspond to over-predictions of the masses by $\sim$ 12\% for HD 4747 B and $\sim$ 30\% for HD 19467 B. We also show that SSEMs that take into account the effect of clouds reduce the under-prediction of luminosity to $\sim 0.6$ dex and the over-prediction of mass to $\sim 8\%$ for HD 4747 B, an L/T transition object that is cool enough to begin forming clouds. One possible explanation for the remaining discrepancies is missing physics in the models, such as the inclusion of metallicity effects., Comment: 12 pages, 6 figures, 5 tables, accepted to ApJ

We present the visual orbit of the double-lined spectroscopic binary HD 224355 from interferometric observations with the CHARA Array, as well as an updated spectroscopic analysis using echelle spectra from the Apache Point Observatory 3.5m telescope. By combining the visual and spectroscopic orbital solutions, we find the binary components to have masses of M1 = 1.626 +/- 0.005 Msun and M2 = 1.608 +/- 0.005 Msun, and a distance of d = 63.98 +/- 0.26 pc. Using the distance and the component angular diameters found by fitting spectrophotometry from the literature to spectral energy distribution models, we estimate the stellar radii to be R1 = 2.65 +/- 0.21 Rsun and R2 = 2.47 +/- 0.23 Rsun. We then compare these observed fundamental parameters to the predictions of stellar evolution models, finding that both components are evolved towards the end of the main sequence with an estimated age of 1.9 Gyr., Accepted for publication in AJ. 10 pages, 6 figures

We present the visual orbit of the double-lined eclipsing binary, HD 185912, from long baseline interferometry with the CHARA Array. We also obtain echelle spectra from the Apache Point observatory to update the spectroscopic orbital solution and analyze new photometry from Burggraaff et al. to model the eclipses. By combining the spectroscopic and visual orbital solutions, we find component masses of M1 = 1.361 +/- 0.004 Msun and M2 = 1.331 +/- 0.004 Msun, and a distance of d = 40.75 +/- 0.30 pc from orbital parallax. From the light curve solution, we find component radii of R1 = 1.348 +/- 0.016 Rsun and R2 = 1.322 +/- 0.016 Rsun. By comparing these observed parameters to stellar evolution models, we find that HD 185912 is a young system near the zero age main sequence with an estimated age of 500 Myr., Comment: Accepted for publication in the Astronomical Journal. 13 pages, 8 figures. (updated references)

Most massive stars are so distant that their angular diameters are too small for direct resolution. However, the observational situation is now much more favorable, thanks to new opportunities available with optical/IR long-baseline interferometry. The Georgia State University Center for High Angular Resolution Astronomy Array at Mount Wilson Observatory is a six-telescope instrument with a maximum baseline of 330 meters, which is capable of resolving stellar disks with diameters as small as 0.2 milliarcsec. The distant stars are no longer out of range, and many kinds of investigations are possible. Here we summarize a number of studies involving angular diameter measurements and effective temperature estimates for OB stars, binary and multiple stars (including the σ Orionis system), and outflows in Luminous Blue Variables. An enlarged visitors program will begin in 2017 that will open many opportunities for new programs in high angular resolution astronomy.

We present the recent developments preparing the construction of a new visible 6T beam combiner for the CHARA Array, called SPICA. This instrument is designed to achieve a large survey of stellar parameters and to image surface of stars. We first detail the science justification and the general idea governing the establishment of the sample of stars and the main guidance for the optimization of the observations. After a description of the concept of the instrument, we focus our attention on the first important aspect: optimizing and stabilizing the injection of light into single mode fibers in the visible under partial adaptive optics correction. Then we present the main requirements and the preliminary design of a 6T-ABCD integrated optics phase sensor in the H-band to achieve long exposures and reach fainter magnitudes in the visible.

Combining visual and spectroscopic orbits of binary stars leads to a determination of the full 3D orbit, individual masses, and distance to the system. We present a full analysis of the evolved binary system $\delta$ Delphini using astrometric data from the MIRC and PAVO instruments on the CHARA long-baseline interferometer, 97 new spectra from the Fairborn Observatory, and 87 unpublished spectra from Lick Observatory. We determine the full set of orbital elements for $\delta$ Del, along with masses of $1.78 \pm 0.07$ $M_{\odot}$ and $1.62 \pm 0.07$ $M_{\odot}$ for each component, and a distance of $63.61 \pm 0.89$ pc. These results are important in two contexts: for testing stellar evolution models and defining the detection capabilities for future planet searches. We find that the evolutionary state of this system is puzzling, as our measured flux ratios, radii, and masses imply a $\sim$ 200 Myr age difference between the components using standard stellar evolution models. Possible explanations for this age discrepancy include mass transfer scenarios with a now ejected tertiary companion. For individual measurements taken over a span of 2 years we achieve $2$ M$_{J}$ on orbits $>0.75$ AU around individual components of hot binary stars via differential astrometry., Comment: 28 pages, 14 figures, accepted for publication in ApJ

Debate over the planet occurrence rates around intermediate-mass stars has hinged on the accurate determination of masses of evolved stars, and has been exacerbated by a paucity of reliable, directly-measured fundamental properties for these stars. We present long-baseline optical interferometry of five evolved intermediate-mass ($\sim\,1.5\,\mathrm{M}_\odot$) planet-hosting stars using the PAVO beam combiner at the CHARA Array, which we combine with bolometric flux measurements and parallaxes to determine their radii and effective temperatures. We measured the radii and effective temperatures of 6 Lyncis ($5.12\pm0.16\,\mathrm{R}_\odot$, $4949\pm58\,\mathrm{K}$), 24 Sextantis ($5.49\pm0.18\,\mathrm{R}_\odot$, $4908\pm65\,\mathrm{K}$), $\kappa$ Coronae Borealis ($4.77\pm0.07\,\mathrm{R}_\odot$, $4870\pm47\,\mathrm{K}$), HR 6817 ($4.45\pm0.08\,\mathrm{R}_\odot$, $5013\pm59\,\mathrm{K}$), and HR 8641 ($4.91\pm0.12\,\mathrm{R}_\odot$, $4950\pm68\,\mathrm{K}$). We find disagreements of typically 15 per cent in angular diameter and $\sim$200 K in temperature compared to interferometric measurements in the literature, yet good agreement with spectroscopic and photometric temperatures, concluding that the previous interferometric measurements may have been affected by systematic errors exceeding their formal uncertainties. Modelling based on BaSTI isochrones using various sets of asteroseismic, spectroscopic, and interferometric constraints tends to favour slightly ($\sim$15 per cent) lower masses than generally reported in the literature., Comment: Accepted for publication in Monthly Notices of the Royal Astronomical Society. 11 pages, 13 figures, and 6 tables

After an eleven year observing campaign, we present the combined visual{spectroscopic orbit of the formerly unremarkable bright star HR 7345 (HD 181655, HIP 94981, GJ 754.2). Using the Separated Fringe Packet (SFP) method with the CHARA Array, we were able to determine a difficult to complete orbital period of 331.609 +/- 0.004 days. The 11 month period causes the system to be hidden from interferometric view behind the Sun for 3 years at a time. Due to the high eccentricity orbit of about 90% of a year, after 2018 January the periastron phase will not be observable again until late 2021. Hindered by its extremely high eccentricity of 0.9322 +/- 0.0001, the double-lined spectroscopic phase of HR 7345 is observable for 15 days. Such a high eccentricity for HR 7345 places it among the most eccentric systems in catalogs of both visual and spectroscopic orbits. For this system we determine nearly identical component masses of 0.941 +/- 0.076 Msun and 0.926 +/- 0.075 Msun as well as an orbital parallax of 41.08 +/- 0.77 mas., Comment: 20 pages, 3 figures, 4 tables

We present interferometric observations of six O-type stars that were made with the Precision Astronomical Visible Observations (PAVO) beam combiner at the Center for High Angular Resolution Astronomy (CHARA) Array. The observations include multiple brackets for three targets, $\lambda$~Ori~A, $\zeta$~Oph, and 10~Lac, but there are only preliminary, single observations of the other three stars, $\xi$~Per, $\alpha$~Cam, and $\zeta$~Ori~A. The stellar angular diameters range from 0.55 milliarcsec for $\zeta$~Ori~A down to 0.11 mas for 10~Lac, the smallest star yet resolved with the CHARA Array. The rotational oblateness of the rapidly rotating star $\zeta$ Oph is directly measured for the first time. We assembled ultraviolet to infrared flux measurements for these stars, and then derived angular diameters and reddening estimates using model atmospheres and an effective temperature set by published results from analysis of the line spectrum. The model-based angular diameters are in good agreement with observed angular diameters. We also present estimates for the effective temperatures of these stars derived by setting the interferometric angular size and fitting the spectrophotometry., Comment: 13 pages, 6 figures, Table 5 - MRT

MWC 314 is a bright candidate luminous blue variable that resides in a fairly close binary system, with an orbital period of 60.753$\pm$0.003 d. We observed MWC 314 with a combination of optical spectroscopy, broad-band ground- and space-based photometry, as well as with long baseline, near-infrared interferometry. We have revised the single-lined spectroscopic orbit and explored the photometric variability. The orbital light curve displays two minima each orbit that can be partially explained in terms of the tidal distortion of the primary that occurs around the time of periastron. The emission lines in the system are often double-peaked and stationary in their kinematics, indicative of a circumbinary disc. We find that the stellar wind or circumbinary disc is partially resolved in the K\prime-band with the longest baselines of the CHARA Array. From this analysis, we provide a simple, qualitative model in an attempt to explain the observations. From the assumption of Roche Lobe overflow and tidal synchronisation at periastron, we estimate the component masses to be M1 $\approx 5$ M$_\odot$ and M2$\approx 15$ M$_\odot$, which indicates a mass of the LBV that is extremely low. In addition to the orbital modulation, we discovered two pulsational modes with the MOST satellite. These modes are easily supported by a low-mass hydrogen-poor star, but cannot be easily supported by a star with the parameters of an LBV. The combination of these results provides evidence that the primary star was likely never a normal LBV, but rather is the product of binary interactions. As such, this system presents opportunities for studying mass-transfer and binary evolution with many observational techniques., Comment: 26 pages, 7 figures, 5 tables, 2 appendices with 7 additional tables and 2 additional figures. Accepted for publication in MNRAS

We investigate physical properties of the nearby (∼ 7.5 pc) astrometric binary μ Cas in the context of standard evolutionary theory. Based on the spectroscopically determined relative abundances ([α/Fe] ? +0.4 dex, [Fe/H] ∼ ?0.7 dex), all physical inputs such as opacities and equation of state are consistently generated. By combining recent spectroscopic analyses with the astrometric observations from the HIPPARCOS parallaxes and the CHARA array, the evolutionary model grids have been constructed. Through the statistical evaluation of the χ²-minimization among alternative models, we find a reliable evolutionary solution (M A , M B , t age ) = (0.74 M ⊙ , 0.19 M ⊙ , 11 Gyr) which excellently satisfies observational constraints. In particular, we find that the helium abundance of μ Cas is comparable with the primordial helium contents (Y p ∼ 0.245). On the basis of the well-defined stellar parameters of the primary star, the internal structure and the p-mode frequencies have been estimated. From our seismic computation, μ Cas is expected to have a first order spacing ?ν ∼ 169 μHz. The ultimate goal of this study is to describe physical processes inside a low-mass star through a complete modelling from the spectroscopic observation to the evolutionary computation.

WFIRST microlensing observations will return high-precision parallaxes, sigma(pi) < 0.3 microarcsec, for the roughly 1 million stars with H and nu_max, while for the fainter ones, it will enable a mass measurement from the single measurable asteroseismic parameter nu_max. Simulations based on Kepler data indicate that WFIRST will be capable of detecting oscillations in stars from slightly less luminous than the red clump to the tip of the red giant branch, yielding roughly 1 million detections., Comment: 13 pages, 6 figures, submitted to JKAS

Nearby, active stars with relatively rapid rotation and large starspot structures offer the opportunity to compare interferometric, spectroscopic, and photometric imaging techniques. In this paper, we image a spotted star with three different methods for the first time. The giant primary star of the RS Canum Venaticorum binary $\sigma$ Geminorum ($\sigma$ Gem) was imaged for two epochs of interferometric, high-resolution spectroscopic, and photometric observations. The light curves from the reconstructions show good agreement with the observed light curves, supported by the longitudinally-consistent spot features on the different maps. However, there is strong disagreement in the spot latitudes across the methods., Comment: Accepted to ApJ, 19 pages, 16 figures, 5 tables

Red clump stars are fundamental distance indicators in astrophysics, although theoretical stellar models predict a dependence of absolute magnitudes with ages. This effect is particularly strong below 2 Gyr, but even above this limit a mild age dependence is still expected. We use seismically identified red clump stars in the Kepler field for which we have reliable distances, masses and ages from the SAGA survey to first explore this effect. By excluding red clump stars with masses larger than 1.6 Msun (corresponding to ages younger than 2 Gyr), we derive robust calibrations linking intrinsic colors to absolute magnitudes in the following photometric systems: Str\"omgren $by$, Johnson $BV$, Sloan $griz$, 2MASS $JHK_s$ and WISE $W1W2W3$. With the precision achieved we also detect a slope of absolute magnitudes 0.020(0.003) mag per Gyrin the infrared, implying that distance calibrations of clump stars can be off by up to 0.2 mag in the infrared (over the range from 2 Gyr to 12 Gyr) if their ages are unknown. Even larger uncertainties affect optical bands, because of the stronger interdependency of absolute magnitudes on colors and age. Our distance calibrations are ultimately based on asteroseismology, and we show how the distance scale can be used to test the accuracy of seismic scaling relations. Within the uncertainties our calibrations are in agreement with those built upon local red clump with Hipparcos} parallaxes, although we find a tension which if confirmed would imply that scaling relations overestimate radii of red clump stars by 2(+-20%. Data-releases post Gaia DR1 will provide an important testbed for our results., Comment: 26 pages, 8 figures, accepted by ApJ

We discuss the estimation of the interferometric visibility (fringe contrast) for the exozodi survey conducted at the CHARA array with the JouFLU beam combiner. We investigate the use of the statistical median to estimate the uncalibrated visibility from an ensemble of fringe exposures. Under a broad range of operating conditions, numerical simulations indicate that this estimator has a smaller bias compared to other estimators. We also propose an improved method for calibrating visibilities, which not only takes into account the time-interval between observations of calibrators and science targets, but also the uncertainties of the calibrators' raw visibilities. We test our methods with data corresponding to stars that do not display the exozodi phenomenon. The results of our tests show that the proposed method yields smaller biases and errors. The relative reduction in bias and error is generally modest, but can be as high as $\sim 20-40\%$ for the brightest stars of the CHARA data, and statistically significant at the $95\%$ confidence level (CL)., Comment: Published in PASP. 22 pages, 7 figures

Context. T Tauri stars are low-mass young stars whose disks provide the setting for planet formation. Despite this, their structure is poorly understood. We present new infrared interferometric observations of the SU Aurigae circumstellar environment that offer resolution that is three times higher and a better baseline position angle coverage than previous observations. Aims. We aim to investigate the characteristics of the circumstellar material around SU Aur, constrain the disk geometry, composition and inner dust rim structure. Methods. The CHARA array offers unique opportunities for long baseline observations, with baselines up to 331 m. Using the CLIMB three-telescope combiner in the K-band allows us to measure visibilities as well as closure phase. We undertook image reconstruction for model-independent analysis, and fitted geometric models such as Gaussian and ring distributions. Additionally, the fitting of radiative transfer models constrain the physical parameters of the disk. For the first time, a dusty disk wind is introduced to the radiative transfer code TORUS to model protoplanetary disks. Our implementation is motivated by theoretical models of dusty disk winds, where magnetic field lines drive dust above the disk plane close to the sublimation zone. Results. Image reconstruction reveals an inclined disk with slight asymmetry along its minor-axis, likely due to inclination effects obscuring the inner disk rim through absorption of incident star light on the near-side and thermal re-emission and scattering of the far-side. Geometric modelling of a skewed ring finds the inner rim at 0.17 ± 0.02 au with an inclination of 50.9 ± 1.0° and minor axis position angle 60.8 ± 1.2°. Radiative transfer modelling shows a flared disk with an inner radius at 0.18 au which implies a grain size of 0.4 μm assuming astronomical silicates and a scale height of 15.0 at 100 au. Among the tested radiative transfer models, only the dusty disk wind successfully accounts for the K-band excess by introducing dust above the mid-plane.

Stellar rotation is a key in our understanding of both mass-loss and evolution of intermediate and massive stars. It can lead to anisotropic mass-loss in the form of radiative wind or an excretion disk. We used the VEGA visible beam combiner installed on the CHARA array that reaches a sub milliarcsecond resolution. We derived, for the first time, the extension and flattening of 51 Oph photosphere. We found an elongated ratio of 1.45 ± 0.12.

With the precise, nearly-continuous photometry from the Kepler satellite and the sub-milliarcsecond resolving capabilities of the CHARA Array, astronomy is entering a new age for the imaging and understanding of stellar magnetic activity. We present first results from our Guest Observer Program, where 180 single-epoch surface image reconstructions of KIC 5110407 have revealed differential rotation and hints of magnetic activity cycles based on both spot and flare variations. Analysis of our larger, full dataset will establish in unprecedented detail how surface magnetic activity correlates with stellar age and spectral type. In addition to Kepler work, we have harnessed the power of the world's largest infrared interferometer to “directly” image the spotted surfaces of a few of the closest RS CVn systems, allowing a comparison of contemporaneous Doppler and light-curve inversion imaging techniques.

This paper provides a summary of binary star research conducted at the CHARA Array. The high angular resolution provided by the longest baselines of the interferometer can resolve binaries down to sub-milli-arcsecond separations. Combining the visual orbit of a binary with spectroscopic radial velocity variations of the components provides a measurement of the stellar masses and distance to the system. This paper provides an overview of interferometric methods used to resolve binaries and a table of orbits that have been resolved spatially using the CHARA Array. In addition to mapping the orbits of binary stars, the six telescopes in the array provide excellent coverage on the sky for studying the circumstellar environments within binary systems and investigating tidal effects within interacting binaries.

When observed with optical long-baseline interferometers (OLBI), components of a binary star which are sufficiently separated such that their interferometric fringe packets do not overlap are referred to as Separated Fringe Packet (SFP) binaries. These SFP binaries extend out into the regime of systems resolvable by speckle interferometry at single, large-aperture telescopes and can provide additional measurements for preliminary orbits lacking good phase coverage, help constrain elements of already established orbits, and locate new binaries in the undersampled regime between the bounds of spectroscopic surveys and speckle interferometry. In this process, a visibility calibration star is not needed, and the separated fringe packets can provide an accurate vector separation. Presented here we describe the method, usage, and modified orbits for several systems used to validate the procedure.

Asteroseismology can make a substantial contribution to our understanding of the formation history and evolution of our Galaxy by providing precisely determined stellar properties for thousands of stars in different regions of the Milky Way. We present here the different sets of observables used in determining asteroseismic stellar properties, the typical level of precision obtained, the current status of results for ages of dwarfs and giants and the improvements than can be expected in the near future in the context of Galactic archaeology., 4 pages, 4 figures, to appear in Astronomische Nachrichten special issue "Reconstruction the Milky Way's History: Spectroscopic surveys, Asteroseismology and Chemo-dynamical models"

The CHARA Array is a six-telescope optical/IR interferometer operated by the Center for High Angular Resolution Astronomy of Georgia State University and is located at Mount Wilson Observatory just to the north of Los Angeles California. The CHARA Array has the largest operational baselines in the world and has been in regular use for scientific observations since 2004. In this paper we give an update of instrumentation improvements, primarily focused on the beam combiner activity. The CHARA Array supports seven beam combiners: CHARA CLASSIC, a two-way high sensitivity K/H/J band system; CLIMB, a three-way K/H/J open air combiner, FLUOR, a two-way K band high precision system; MIRC, a four/six-way H/K band imaging system; CHAMP, a six way K band fringe tracker; VEGA, a four way visible light high spectral resolution system; and PAVO, a three-way visible light high sensitivity system. The paper will conclude with a review of science results obtained over the last few years, including our most recent imaging results.

The ALOHA research program aims to propose a breakthrough generation of instrument for high resolution imaging in astronomy. This fully innovative concept results from our unique skills with a simultaneous competence in nonlinear optics and high resolution imaging with telescope arrays. Acting like a mixer in a radio receiver, the nonlinear process (sum frequency generation) shifts the infrared radiations emitted by the observed astrophysical source to a visible spectral domain. This way, the light beam is more easily processed by mature optical devices and detectors. The compatibility of the nonlinear process with the spatial coherence analysis has been successfully tested through preliminary in lab experiments. Now it’s time to apply this technique in a real astronomical environment. First on-sky results have been observed during the last missions at the CHARA Array.

We report on interferometric observations with the CHARA Array of two classical Wolf-Rayet stars in suspected binary systems, namely WR 137 and WR 138. In both cases, we resolve the component stars to be separated by a few milliarcseconds. The data were collected in the H-band, and provide a measure of the fractional flux for both stars in each system. We find that the WR star is the dominant H-band light source in both systems ($f_{\rm WR, 137} = 0.59\pm0.04$; $f_{\rm WR, 138} = 0.67\pm0.01$), which is confirmed through both comparisons with estimated fundamental parameters for WR stars and O dwarfs, as well as through spectral modeling of each system. Our spectral modeling also provides fundamental parameters for the stars and winds in these systems. The results on WR 138 provide evidence that it is a binary system which may have gone through a previous mass-transfer episode to create the WR star. The separation and position of the stars in the WR 137 system together with previous results from the IOTA interferometer provides evidence that the binary is seen nearly edge-on. The possible edge-on orbit of WR 137 aligns well with the dust production site imaged by the Hubble Space Telescope during a previous periastron passage, showing that the dust production may be concentrated in the orbital plane., 11 pages, 4 tables, 7 figures, accepted to MNRAS

We intend to implement the ALOHA at 1.55[Formula: see text][Formula: see text]m up-conversion interferometer on the CHARA Array. After a full laboratory investigation, a sensitivity evaluation is conducted on several stars using a single interferometric arm in a photometric mode. The on-sky photometric results allows us to calibrate a numerical simulation of the interferometric configuration, and to predict the future performance of ALOHA at 1.55[Formula: see text][Formula: see text]m as a function of the seeing conditions.

We present long-baseline interferometry of the Kepler exoplanet host star HD179070 (Kepler-21) using the PAVO beam combiner at the CHARA Array. The visibility data are consistent with a single star and exclude stellar companions at separations ~1-1000 mas (~ 0.1-113 AU) and contrasts < 3.5 magnitudes. This result supports the validation of the 1.6 R_{earth} exoplanet Kepler-21b by Howell et al. (2012) and complements the constraints set by adaptive optics imaging, speckle interferometry, and radial velocity observations to rule out false-positives due to stellar companions. We conclude that long-baseline interferometry has strong potential to validate transiting extrasolar planets, particularly for future projects aimed at brighter stars and for host stars where radial velocity follow-up is not available.

Direct detection of thermal emission from nearby hot Jupiters has greatly advanced our knowledge of extrasolar planets in recent years. Since hot Jupiter systems can be regarded as analogs of high contrast binaries, ground-based infrared long baseline interferometers have the potential to resolve them and detect their thermal emission with precision closure phase - a method that is immune to the systematic errors induced by the Earth's atmosphere. In this work, we present closure phase studies toward direct detection of nearby hot Jupiters using the CHARA interferometer array outfitted with the MIRC instrument. We carry out closure phase simulations and conduct a large number of observations for the best candidate {\upsion} And. Our experiments suggest the method is feasible with highly stable and precise closure phases. However, we also find much larger systematic errors than expected in the observations, most likely caused by dispersion across different wavelengths. We find that using higher spectral resolution modes (e.g., R=150) can significantly reduce the systematics. By combining all calibrators in an observing run together, we are able to roughly recalibrate the lower spectral resolution data, allowing us to obtain upper limits of the star-planet contrast ratios of {\upsion} And b across the H band. The data also allow us to get a refined stellar radius of 1.625\pm0.011 R\odot. Our best upper limit corresponds to a contrast ratio of 2.1\times10^3:1 with 90% confidence level at 1.52{\mu}m, suggesting that we are starting to have the capability of constraining atmospheric models of hot Jupiters with interferometry. With recent and upcoming improvements of CHARA/MIRC, the prospect of detecting emission from hot Jupiters with closure phases is promising., Comment: 30 pages, including 9 figures and 4 tables. Published in PASP in August 2011

We present interferometric observations of the Be star Zeta Tau obtained using the MIRC beam combiner at the CHARA Array. We resolved the disk during four epochs in 2007-2009. We fit the data with a geometric model to characterize the circumstellar disk as a skewed elliptical Gaussian and the central Be star as a uniform disk. The visibilities reveal a nearly edge-on disk with a FWHM major axis of ~ 1.8 mas in the H-band. The non-zero closure phases indicate an asymmetry within the disk. Interestingly, when combining our results with previously published interferometric observations of Zeta Tau, we find a correlation between the position angle of the disk and the spectroscopic V/R ratio, suggesting that the tilt of the disk is precessing. This work is part of a multi-year monitoring campaign to investigate the development and outward motion of asymmetric structures in the disks of Be stars., Comment: Accepted for publication in the Astronomical Journal. 27 pages, 7 Figures

We present the results of a comprehensive assessment of companions to solar-type stars. A sample of 454 stars, including the Sun, was selected from the Hipparcos catalog with {\pi} > 40 mas, {\sigma}_{\pi}/{\pi} < 0.05, 0.5 < B - V < 1.0 (~ F6-K3), and constrained by absolute magnitude and color to exclude evolved stars. New observational aspects of this work include surveys for (1) very close companions with long-baseline interferometry at the CHARA Array, (2) close companions with speckle interferometry, and (3) wide proper motion companions identified by blinking multi-epoch archival images. In addition, we include the results from extensive radial-velocity monitoring programs and evaluate companion information from various catalogs. The overall observed fractions of single, double, triple, and higher order systems are 56% \pm 2%, 33% \pm 2%, 8% \pm 1%, and 3% \pm 1%, respectively, counting all confirmed stellar and brown dwarf companions. Our completeness analysis indicates that only a few undiscovered companions remain in this well-studied sample, implying that the majority (54% \pm 2%) of solar-type stars are single, in contrast to the results of prior multiplicity studies. The orbital-period distribution of companions is unimodal and roughly log-normal with a peak of about 300 years. The period-eccentricity relation shows a roughly flat distribution beyond the expected circularization for periods below 12 days. The mass-ratio distribution shows a preference for like-mass pairs, which occur more frequently in relatively close pairs. The fraction of planet hosts among single, binary, and multiple systems are statistically indistinguishable, suggesting that planets are as likely to form around single stars as they are around components of binary or multiple systems with sufficiently wide separations., Comment: Accepted for publication by the ApJS. 182 pages, including 24 figures and 18 tables. The Abstract on astro-ph has been trimmed to adhere to character-limits. Please see the PDF for the full abstract

We present the modification of the orbits of χ Draconis and HD 184467, and a completely new orbit for HD 198084, including data taken at the Center for High Angular Resolution Astronomy (CHARA) Array. These data were obtained using a modification of the technique of separated fringe packets (SFPs). The accuracy of the SFP data surpasses that of data taken by speckle, but the technique is much more time and labor intensive. Additionally, using SFPs with the CHARA Array, it is possible to obtain separations below the detection range of speckle interferometry (30 mas) above the range in “classic” long-baseline interferometry where fringes from a binary overlap are no longer separated (10 mas). Using spectroscopic binary systems with published speckle orbits, we are able to test our new measurements against their ephemerides to calibrate the method as well as produce entirely new orbits for systems with no current astrometric observations.

Using Georgia State University's CHARA Array interferometer, we measured angular diameters for 25 giant stars, six of which host exoplanets. The combination of these measurements and Hipparcos parallaxes produce physical linear radii for the sample. Except for two outliers, our values match angular diameters and physical radii estimated using photometric methods to within the associated errors with the advantage that our uncertainties are significantly lower. We also calculated the effective temperatures for the stars using the newly-measured diameters. Our values do not match those derived from spectroscopic observations as well, perhaps due to the inherent properties of the methods used or because of a missing source of extinction in the stellar models that would affect the spectroscopic temperatures.

The very long baseline interferometer (VLBI) can achieve the highest angular resolution imaging of any telescope at radio wavelengths using thousand-kilometre baselines. The deployment at the center for high angular resolution astronomy (CHARA) array of new beam combiners has enabled the imaging capabilities of the array. CHARA can now obtain images with an angular resolution similar to the VLBI but using hundred-metre baselines. This is achieved by operating the array at the shorter wavelengths of optical and infrared light. We review the successful deployment of the Michigan infrared combiner at the CHARA array and discuss some of the imaging results from this instrument.

We present sub-milliarcseond resolution imaging and modeling of two nearby rapid rotators Alpha Cephei and Alpha Ophiuchi, obtained with the CHARA array - the largest optical/IR interferometer in the world. Incorporating a gravity darkening model, we are able to determine the inclination, the polar and equatorial radius and temperature, as well as the fractional rotation speed of the two stars with unprecedented precision. The polar and equatorial regions of the two stars have ~2000K temperature gradient, causing their apparent temperatures and luminosities to be dependent on their viewing angles. Our modeling allow us to determine the true effective temperatures and luminosities of Alpha Cep and Alpha Oph, permitting us to investigate their true locations on the H-R diagram. These properties in turn give us estimates of the masses and ages of the two stars within a few percent of error using stellar evolution models. Also, based on our gravity darkening modeling, we propose a new method to estimate the masses of single stars in a more direct way through Vsin(i) measurements and precise geometrical constraint. Lastly, we investigate the degeneracy between the inclination and the gravity darkening coefficient, which especially affects the modeling of Alpha Oph. Although incorporating Vsin(i) has lifted the degeneracy to some extent, higher resolution observations are still needed to further constrain the parameters independently.