Search

This document is a collection of abstracts from the Canadian Journal of Plant Pathology, covering a wide range of topics related to plant diseases and their management. The abstracts provide brief overviews of each study and its findings, offering valuable information for researchers and library patrons interested in plant pathology. Topics include the effects of biostimulants on lettuce growth, organic amendments for managing root-lesion nematodes in apple orchards, using high-throughput sequencing for pathogen surveillance in bees and pollen, identifying and characterizing viruses affecting blueberries, and various studies on agricultural topics such as scorch viruses in blueberries, NLR immune receptors in wheat, and greenhouse gas emissions in cropping systems. Other studies focus on apple replant disease, bio-surveillance methods for phytopathogens in grain and oilseed, fungal endophytes for managing apple replant disease, genetic diversity in clubroot, and identifying virulence factors in Plasmodiophora brassicae. Additional studies cover topics such as wheat resistance to Fusarium head blight, proteins facilitating virus infection in Arabidopsis, metabarcoding for monitoring crop-associated phytopathogens, antibacterial activity of maple leaf extracts, genetic mapping for stem rust resistance in barley, and the impact of row spacing and fungicide timing on leaf disease severity in spring wheat. The document also includes studies on crop disease monitoring, climate change and crop production, resistance to diseases, root system architecture, genomic regions associated with root system [Extracted from the article]

Early monitoring of within-field yield variability and forecasting yield potential is critical for farmers and other key stakeholders such as policymakers. Remote sensing techniques are progressively being used in yield prediction studies due to easy access and affordability. Despite the increasing use of remote sensing techniques for yield prediction in agriculture, there is still a need for medium-resolution satellite imagery when predicting canola yield using a combination of crop and soil information. In this study, we investigated the utility of remotely sensed flowering information from PlanetScope (at 4 m) satellite imagery combined with derived soil and topography parameters to predict canola yield. Our yield prediction model was trained and validated using data from 21 fields managed under variable rate seed and fertilizer application, including cleaned harvester yield maps, soil, and topography maps. To quantify the flowering intensity of canola, 9 vegetation indices (VIs) were calculated using spectral bands from PlanetScope imagery acquired for the reproductive stages of canola. We created five random forest regression models using different subsets of covariates, including VIs, soil, and topography features, to predict canola yield within the season. Using a random forest regression algorithm, we recorded accuracies ranging from poor to best performing using coefficient of determination and root mean squared error (R2: 0.47 to 0.66, RMSE: 325 to 399 kg ha−1). The optimal subset of covariates identified electrical conductivity (EC), Normalized Difference Yellowness Index, and Canola Index as the key variables explaining within-spatial variability in canola yield. Our final model exhibited a validation R2 of 0.46 (RMSE = 730 kg ha−1), demonstrating the potential of medium-resolution satellite imagery during the flowering stage to detect and quantify sub-field spatial and temporal floral phenology changes when predicting canola yield. [ABSTRACT FROM AUTHOR]

Feralization of genetically engineered (GE) crops increases the risk that transgenes will become integrated into natural and naturalizing plant populations. A key assumption of the management of GE crops is that populations of escaped plants are short-lived and therefore the risks they pose are limited. However, few populations of escaped crop plants have been tracked over the long term so our understanding of their persistence in ruderal or natural landscapes is limited. We repeated a large-scale road survey of feral GE canola populations in North Dakota, USA, initially conducted in 2010. Our objectives in 2021 were to determine the current distribution of feral canola populations, and to establish the relative frequency of GE and non-GE phenotypes in populations of canola throughout North Dakota. Our results indicate that, although the incidence of feral canola was less in 2021 than 2010, escaped canola populations remain common throughout the state. The prevalence of alternate forms of GE herbicide resistance changed between surveys, and we found an overabundance of non-GE plants compared to the frequency of non-transgenic forms in cultivation. Indirect evidence of persistence includes sampling plants with multiple transgenic traits, and finding populations far from transportation routes. We conclude that feral canola populations expressing transgenic herbicide resistance are established outside of cultivation, that they may be under selection for loss of the transgene, but that they nonetheless pose long-term risks by harboring transgenes in the unmanaged landscape. [ABSTRACT FROM AUTHOR]

Abscisic acid (ABA) plays multiple and pivotal roles in plant defence against abiotic and biotic stresses. Blackleg, mainly caused by the fungal pathogen Leptosphaeria maculans, is one of the most devastating diseases in canola (Brassica napus) resulting in significant yield loss worldwide. Few studies have investigated the function of ABA biosynthesis genes in response to fungal pathogens. In this study, we identified and characterized BnNCED3 (9‐cis‐epoxycarotenoid dioxygenease) and BnTX1 (trithorax‐like factor) from B. napus. Transgenic B. napus ‘Westar’ plants overexpressing BnNCED3 showed enhanced adult plant resistance to blackleg infection. Chromatin immunoprecipitation‐quantitative PCR demonstrated that BnTX1 bound to the promoter region of the BnNCED3 gene. However, the overexpression of BnTX1 in transgenic plants decreased adult plant resistance to blackleg pathogen infection. The expression analysis confirmed the abundance of BnNCED3 transcripts was higher in BnTX1‐RNAi knockdown plants than in overexpressing plants. Thus, BnTX1 might play a negative role in regulating BnNCED3 gene expression and hence ABA biosynthesis, thereby affecting plant disease resistance. Our study provides a new model demonstrating how increased ABA levels can enhance plant disease resistance, which may lead to the characterization of minor/quantitative genes in the B. napus–L. maculans interaction. [ABSTRACT FROM AUTHOR]

Salinity stress is a significant challenge in agricultural production. When soil contains high salts, it can adversely affect plant growth and productivity due to the high concentration of soluble salts in the soil water. To overcome this issue, foliar applications of methyl jasmonate (MJ) and gibberellic acid (GA3) can be productive amendments. Both can potentially improve the plant's growth attributes and flowering, which are imperative in improving growth and yield. However, limited literature is available on their combined use in canola to mitigate salinity stress. That's why the current study investigates the impact of different levels of MJ (at concentrations of 0.8, 1.6, and 3.2 mM MJ) and GA3 (0GA3 and 5 mg/L GA3) on canola cultivated in salt-affected soils. Applying all the treatments in four replicates. Results indicate that the application of 0.8 mM MJ with 5 mg/L GA3 significantly enhances shoot length (23.29%), shoot dry weight (24.77%), number of leaves per plant (24.93%), number of flowering branches (26.11%), chlorophyll a (31.44%), chlorophyll b (20.28%) and total chlorophyll (27.66%) and shoot total soluble carbohydrates (22.53%) over control. Treatment with 0.8 mM MJ and 5 mg/L GA3 resulted in a decrease in shoot proline (48.17%), MDA (81.41%), SOD (50.59%), POD (14.81%) while increase in N (10.38%), P (15.22%), and K (8.05%) compared to control in canola under salinity stress. In conclusion, 0.8 mM MJ + 5 mg/L GA3 can improve canola growth under salinity stress. More investigations are recommended at the field level to declare 0.8 mM MJ + 5 mg/L GA3 as the best amendment for alleviating salinity stress in different crops. [ABSTRACT FROM AUTHOR]

In this study, a rutabaga (Brassica napus ssp. napobrassica) donor parent FGRA106, which exhibited broad-spectrum resistance to 17 isolates representing 16 pathotypes of Plasmodiophora brassicae, was used in genetic crosses with the susceptible spring-type canola (B. napus ssp. napus) accession FG769. The F2 plants derived from a clubroot-resistant F1 plant were screened against three P. brassicae isolates representing pathotypes 3A, 3D, and 3H. Chi-square (χ2) goodness-of-fit tests indicated that the F2 plants inherited two major clubroot resistance genes from the CR donor FGRA106. The total RNA from plants resistant (R) and susceptible (S) to each pathotype were pooled and subjected to bulked segregant RNA-sequencing (BSR-Seq). The analysis of gene expression profiles identified 431, 67, and 98 differentially expressed genes (DEGs) between the R and S bulks. The variant calling method indicated a total of 12 (7 major + 5 minor) QTLs across seven chromosomes. The seven major QTLs included: BnaA5P3A.CRX1.1, BnaC1P3H.CRX1.2, and BnaC7P3A.CRX1.1 on chromosomes A05, C01, and C07, respectively; and BnaA8P3D.CRX1.1, BnaA8P3D.RCr91.2/BnaA8P3H.RCr91.2, BnaA8P3H.Crr11.3/BnaA8P3D.Crr11.3, and BnaA8P3D.qBrCR381.4 on chromosome A08. A total of 16 of the DEGs were located in the major QTL regions, 13 of which were on chromosome C07. The molecular data suggested that clubroot resistance in FGRA106 may be controlled by major and minor genes on both the A and C genomes, which are deployed in different combinations to confer resistance to the different isolates. This study provides valuable germplasm for the breeding of clubroot-resistant B. napus cultivars in Western Canada. [ABSTRACT FROM AUTHOR]

The objective of this study was to characterize ruminal degradation, intestinal digestion and total true nutrient supply to dairy cows from canola feedstock (canola seeds) and coproducts (meal and pellets) from bio‐oil processing which were impacted by source origin. The feedstocks and coproducts (mash, pellet) were randomly collected from five different bio‐oil processing plants with five different batches of samples in each bio‐processing plant in Canada (CA) and China (CH). In situ rumen degradation kinetics were determined using four fistulated Holstein cows with incubation times at 0, 2, 4, 8, 12, 24 and 48 h. Intestinal digestions were determined using the three‐step in vitro method with preincubation at 12 h. The DVE/OEB and National Research Council systems were applied to evaluate the truly absorbable nutrient supply to dairy cows and feed milk values (FMVs). The results showed that in situ undegradable fractions (U) (p = 0.025) were higher in CA meals, and potentially degradable fraction of D was higher (p = 0.016) in CH meals. CH meals had higher total digestible dry matter (TDDM, p = 0.018) and intestinal digestibility of protein (dIDP, p = 0.016). Canola meals from CA had lower MREE (microbial protein synthesized in the rumen based on available rumen degradable protein; p = 0.011) and DVME (rumen synthesized microbial protein digested in the small intestine; p = 0.011) and had higher ECP (endogenous protein in the small intestine, p = 0.001) and absorbed endogenous crude protein (truly absorbed ECP in the small intestine) than CH (p = 0.001). The FMV evaluated based on the metabolic protein and net energy showed no differences between CA and CH in both coproducts and feedstocks. [ABSTRACT FROM AUTHOR]

Non‐crop vegetation areas in agricultural landscapes are vital for maintaining biodiversity. However, they potentially host pest insects, which can cause economic loss in crop fields. Some insect species have been found to spill into crops from these areas, but this varies depending on species, landscape composition and the time of the season. To determine if five common pest insects of canola crops were spilling into fields during the late growing season, we collected samples at various distances from non‐crop areas, in a part of the Canadian Prairies (Alberta, Canada) where this crop is widely grown. Sampling occurred at 15 sites in each of 10 fields (N = 150 sites). We modelled changes in pest abundance over distance from the non‐crop areas and contrasted the abundance of each taxon in the crop and non‐crop areas. Only leafhoppers (Hemiptera: Cicadellidae) demonstrated a declining gradient in abundance that is consistent with spillover from non‐crop vegetation areas into the canola fields. Weevils were found to have significantly higher abundance in the non‐crop areas, indicating a relationship between this taxon and the non‐crop area in the late season, but there was no decline in abundance, which might indicate spillover occurring. All taxa demonstrated spatial differences in abundance among fields. This study found limited evidence that the pests are spilling over from non‐crop vegetation into canola crops during the late season. Therefore, movement of pests from non‐crop vegetation areas at this time is unlikely to be a driver of pest pressure for this economically important crop. [ABSTRACT FROM AUTHOR]

Context: Spring-sown forage brassicas are commonly used to fill feed gaps in high-rainfall temperate livestock systems, but they have wider potential as an autumn-sown forage in drier environments within Australia's crop–livestock zone. Aims: We modelled the production potential of autumn-sown forage brassicas grown in diverse environments and tested their ability to alter the frequency and magnitude of feed gaps. Methods: Long-term production potential was simulated in APSIM for four forage brassica genotypes, compared with forage wheat and dual-purpose canola across 22 diverse agro-climatic locations. For seven regions, the change in frequency and magnitude of forage deficits from adding forage brassicas to representative forage–livestock systems was predicted. Key results: Across locations, median yields of forage brassicas ranged from 7 to 19 t DM/ha, and their annual metabolisable-energy yield was higher than that of forage wheat at most sites and nearly always exceeded dual-purpose canola. Forage brassicas performed better than forage wheat in later-sowing events (late April to early May) and maintained growth and quality later into spring. At five of the seven regions, adding 15% of farm forage area to forage brassicas reduced the frequency and magnitude of feed deficits by 35–50% and 20–40%, respectively. However, they were less beneficial where winter–spring feed gaps are uncommon. Conclusions: We demonstrated that autumn-sown forage brassicas can be reliable and productive contributors to the feed base in drier environments and are a suitable alternative to forage cereals. Implications: Forage brassicas can help reduce feed gaps and improve livestock production in a range of production systems spanning Australia's crop–livestock zone. Long-term simulation modelling showed that autumn-sown forage brassicas can serve as a reliable and valuable forage source in drier environments across Australia's crop–livestock zone. They have a long grazing window and stable production across a range of sowing dates and environments. Integrating forage brassicas into the existing feed base can reduce the frequency and magnitude of on-farm feed deficits in livestock production systems. They can also allow for a safe increase in stocking rates and reduce the need for supplementary feed. [ABSTRACT FROM AUTHOR]

Pork production is a significant agricultural enterprise in the United States and Canada. The United States is the third-largest global producer of pork and Canada ranks seventh in pork production. The North American Free Trade Agreement and its successor, the U.S.-Mexico-Canada Agreement, have facilitated trade and integration between the two countries. The majority of production systems are modern and intensive, characterized by large vertically integrated farms using advanced technologies. Both nations benefit from their status as major producers of feed grains, with the United States leading in corn and soybeans, while Canada excels in canola and barley production. The regulatory frameworks for food safety, animal welfare, and environmental stewardship differ slightly, with the FDA and USDA overseeing these aspects in the United States, and Health Canada and the Canada Food Inspection Agency in Canada. The United States and Canada also have well-established distribution networks for pork products, relying on both domestic and international markets. Export markets play a crucial role, with the United States being a major importer of Canadian pigs, and both countries exploring opportunities in Asia. Despite a rise in global demand, domestic pork consumption trends differ, with per capita consumption remaining stable in the USA and declining in Canada. Changing consumer preferences, including a demand for ethically raised and locally sourced pork, may influence production practices. Future trends in pig production include a focus on consumer concerns, sustainability, disease prevention, reduction of antimicrobial use, and advancements in technology. The industry is adapting to challenges such as disease outbreaks and changing regulations, with a strong emphasis on animal welfare. Labor and workforce considerations, along with advancements in technology and automation, are expected to shape the efficiency of pork production in the future. [ABSTRACT FROM AUTHOR]

Understanding of functional responses (i.e., changes in predator feeding rates with prey density) of key predators to different crop pest stages is critical to strengthening biological control, particularly in view of climate change and temperature variation. We investigated prey preferences of Coccinella septempunctata L. (Coleoptera: Coccinelidae) to egg and larval stages of a key brassicaceous pest of canola (Brassica napus L., Brassicaceae), the diamondback moth, Plutella xylostella L. (Lepidoptera: Plutellidae). First, laboratory choice and no‐choice bioassays tested the hypotheses that C. septempunctata accepts and differentially prefers two prey developmental stages (eggs and larvae). Then, C. septempunctata larvae and adults were exposed to six densities of P. xylostella eggs over 24 h in functional response bioassays that determined the number of eggs consumed. Finally, the functional response bioassays were repeated with larval prey and extended with three temperature regimes: 10, 22 and 32 °C. In both choice and no‐choice assays, C. septempunctata adults and larvae consumed more P. xylostella larvae than eggs. The functional response of C. septempunctata depended on predator developmental stage and temperature, with reduced handling time and increased attack rates and consumption under warmer conditions. At 10 and 22 °C, the functional responses of both C. septempunctata larvae and adults were of Type II, i.e., rates of prey consumption increase at decelerating rates and then plateau with increasing prey density. Our study demonstrates that both larvae and adults of C. septempunctata can consume high numbers of eggs and early instar P. xylostella larvae; these responses are temperature‐dependent with increased consumption rates at higher temperatures. This may lead to improvements in management of P. xylostella in canola. [ABSTRACT FROM AUTHOR]

There are different climate classes in Iran where about 85% of the agricultural lands are located in arid and semi-arid regions. To mitigate or compensate effects of drought stress and increase crop fitting and yield, effects of micronutrient application have been studied by several researchers. Field experiments were conducted during the 2021–2022 and 2022–2023 crop seasons to investigate the effect of micronutrients on quantitative and qualitative characteristics of canola cultivars under late-season drought stress conditions. The experiments were arranged in a factorial split-plot design, with two irrigation treatments – normal irrigation (control) or restricted irrigation at flowering stage – and four foliar applications of Zn and Mn after rosette stage (F1: Water, F2: ZnSO4, F3: MnSO4 and F4: ZnSO4 + MnSO4) as the main factor. Winter canola cultivars, including Okapy, Hyola401 and Hyola308, as sub-factor. The results showed that limited irrigation at flowering reduced seed yield, oil percentage and fatty acids content in different canola cultivars. Most of the canola oil is composed of unsaturated fatty acids, and the occurrence of drought stress at the reproductive stage reduced oil quality. By contrast, the minimum yield loss was obtained from Hylon401 cultivar, an early mature cultivar. Overall, it is recommended Hylon401 cultivar for normal irrigation and Hylon308 cultivar for a drought environment when considered the acceptable seed yield in canola. In general, it is suggested that a suitable performance of canola seeds is achieved by foliar application of manganese and zinc. [ABSTRACT FROM AUTHOR]

Two field experiments were conducted during the main seasons of 2021/2022 at the Research and Production Station of National Research Centre in Egypt to investigate the effects of farmyard manure (FYM) and boron on Canola growth, yield, oil yield, and quality. The results unequivocally demonstrated that the combined application of FYM at a rate of 14.4 ton ha-1 with a foliar spray of boron at 100 ppm positively influenced plant characteristics, leading to enhanced growth rates and higher yields compared to the control group. Moreover, this integrated approach significantly improved nutrient content by enhancing levels of oil content, carbohydrates, proteins, phenolics, flavonoids, and total soluble sugars. These findings provide compelling evidence that utilizing farm manure along with boron can effectively enhance Canola properties in newly reclaimed soils while promoting sustainable agricultural practices. [ABSTRACT FROM AUTHOR]

Metsulfuron-methyl, a widely used herbicide, could cause damage to the sensitive plants in crop-rotation systems at extremely low levels in the soil. The potential of plant growth-promoting bacteria (PGPB) for enhancing the resistance of plants against herbicide stress has been discovered recently. Therefore, it is poorly understood how physiological processes occur in plants, while PGPB reduce the phytotoxicity of herbicides for agricultural crops. In greenhouse studies, the effect of strains Pseudomonas protegens DA1.2 and Pseudomonas chlororaphis 4CH on oxidative damage, acetolactate synthase (ALS), enzymatic and non-enzymatic antioxidants in canola (Brassica napus L.), and wheat (Triticum aestivum L.) were investigated under two levels (0.05 and 0.25 mg∙kg−1) of metsulfuron-methyl using spectrophotometric assays. The inoculation of herbicide-exposed wheat with bacteria significantly increased the shoots fresh weight (24–28%), amount of glutathione GSH (60–73%), and flavonoids (5–14%), as well as activity of ascorbate peroxidase (129–140%), superoxide dismutase SOD (35–49%), and ALS (50–57%). Bacterial treatment stimulated the activity of SOD (37–94%), ALS (65–73%), glutathione reductase (19–20%), and the accumulation of GSH (61–261%), flavonoids (17–22%), and shoots weight (27–33%) in herbicide-exposed canola. Simultaneous inoculation prevented lipid peroxidation induced by metsulfuron-methyl in sensitive plants. Based on the findings, it is possible that the protective role of bacterial strains against metsulfuron-metil is linked to antioxidant system activation. [ABSTRACT FROM AUTHOR]

Today, the effects of climate change have started to be experienced and will continue to be experienced. It is estimated that many sectors will be affected by climate change. The agricultural sector is one of these sectors. Thrace Region is one of our important regions that contribute to wheat, canola, and sunflower production in Turkey. Therefore, when unpredictable situations arise with climate change, it is very important to accurately determine how the cultivation areas of these three plants, which have an important role in the agriculture and food sector, will change in the future against climate change. First of all, it is necessary to predict precisely how the climate will change, and then to determine what precautions should be taken by making plans. The aim of this study is to predict how climate change will affect the geographical distributions of wheat, canola and sunflower plants grown in the Thrace Region in the future, using a plant suitability model. For this purpose, the suitability of wheat, canola and sunflower plants for the current period (1950-2000) in the Thrace Region was determined using the Ecocrop module included in the DIVA-GIS program, and then in line with the results of the HADGEM2_ES model RCP4.5 and RCP8.5 scenarios for the next period, in the 2050s, suitability estimates were made for these three plants by using the Ecocrop module. Current and future prediction results are compared with each other. As a result, in the TR21 Thrace Region in the 2050s, in the HADGEM2_ES model RCP4.5 scenario for wheat, suitable, very suitable, and excellent areas will be replaced by not suited, very marginal, marginal areas, respectively. This will be more severe under RCP8.5 scenario. For canola, suitable and very suitable areas will be replaced by suitable and excellent areas, respectively, in the 2050s, and this positive situation will occur more in the RCP4.5 scenario. In sunflower, on the other hand, it has been predicted that the areas that are excellent current will not change in the future. It is recommended that producers, decision makers and practitioners direct the future in line with these results while planning. [ABSTRACT FROM AUTHOR]

To meet the rising requirement for food production, by 2050, it is necessary to increase global production two-fold, necessitating the growth of new crop varieties. However, this process is time-consuming, largely determined by the crop's generation period. To address this challenge, Speed Breeding (SB) technology leverages controlled environmental conditions to accelerate plant development, allowing for the multiplication of many generations per year. SB also allows for the integration of advanced protocols such as gene editing, phenotyping, and genotyping accelerating crop improvement. SB has been effectively applied to various crops, including cereals, pulses and canola crops, producing 4–6 generations in a year. With its application to a wide range of crops and lower labor requirements than breeding methods, SB offers a practical and efficient option for crops with large populations. Speed breeding has come up as a highly efficient and potent method for rapidly developing new plant varieties. Notable successes have been achieved in crops like cereals, oilseed and vegetables where new cultivars have been developed with desirable attributes such as more protein content, disease resistance, salt tolerance and drought tolerance. Overall, speed breeding offers an accessible and transformative option for crop improvement, which will definitely help in global agricultural demand and mitigate the result of climate alteration on agriculture. This review provides a glance of SB's activities across various crops and its significance in the current context of crop improvement. [ABSTRACT FROM AUTHOR]

Breeding for disease resistance in major crops is of crucial importance for global food security and sustainability. However, common biotechnologies such as traditional transgenesis or genome editing do not provide an ideal solution, whereas transgenic crops free of selection markers such as cisgenic/intragenic crops might be suitable. In this study, after cloning and functional verification of the Rcr1 gene for resistance to clubroot (Plasmodiophora brassicae), we confirmed that the genes Rcr1 , Rcr2 , Rcr4 , and CRa from Brassica rapa crops and the resistance gene from B. napus oilseed rape cv. 'Mendel' on chromosome A03 were identical in their coding regions. We also determined that Rcr1 has a wide distribution in Brassica breeding materials and renders potent resistance against multiple representative clubroot strains in Canada. We then modified a CRISPR/Cas9-based cisgenic vector system and found that it enabled the fast breeding of selection-marker-free transgenic crops with add-on traits, with selection-marker-free canola (B. napus) germplasms with Rcr1 -rendered stable resistance to clubroot disease being successfully developed within 2 years. In the B. napus background, the intragenic vector system was able to remove unwanted residue sequences from the final product with high editing efficiency, and off-target mutations were not detected. Our study demonstrates the potential of applying this breeding strategy to other crops that can be transformed by Agrobacterium. Following the streamlined working procedure, intragenic germplasms can be developed within two generations, which could significantly reduce the breeding time and labor compared to traditional introgression whilst still achieving comparable or even better breeding results. [ABSTRACT FROM AUTHOR]

Lignocellulosic biomass such as canola straw is produced as low-value residue from the canola processing industry. Its high cellulose and hemicellulose content makes it a suitable candidate for the production of hydrogen via supercritical water gasification. However, supercritical water gasification of lignocellulosic biomass such as canola straw suffers from low hydrogen yield, hydrogen selectivity, and conversion efficiencies. Cost-effective and sustainable catalysts with high catalytic activity for supercritical water gasification are increasingly becoming a focal point of interest. In this research study, novel wet-impregnated nickel-based catalysts supported on carbon-negative hydrochar obtained from hydrothermal liquefaction (HTL-HC) and hydrothermal carbonization (HTC-HC) of canola straw, along with other nickel-supported catalysts such as Ni/Al2O3, Ni/ZrO2, Ni/CNT, and Ni/AC, were synthesized for gasification of canola straw on previously optimized reaction conditions of 500 °C, 60 min, 10 wt%, and 23–25 MPa. The order of hydrogen yield for the six supports was (10.5 mmol/g) Ni/ZrO2 > (9.9 mmol/g) Ni/Al2O3 > (9.1 mmol/g) Ni/HTL-HC > (8.8 mmol/g) Ni/HTC-HC > (7.7 mmol/g) Ni/AC > (6.8 mmol/g) Ni/CNT, compared to 8.1 mmol/g for the non-catalytic run. The most suitable Ni/ZrO2 catalyst was further modified using promotors such as K, Zn, and Ce, and the performance of the promoted Ni/ZrO2 catalysts was evaluated. Ni-Ce/ZrO2 showed the highest hydrogen yield of 12.9 mmol/g, followed by 12.0 mmol/g for Ni-Zn/ZrO2 and 11.6 mmol/g for Ni-K/ZrO2. The most suitable Ni-Ce/ZrO2 catalysts also demonstrated high stability over their repeated use. The superior performance of the Ni-Ce/ZrO2 was due to its high nickel dispersion, resilience to sintering, high thermal stability, and oxygen storage capabilities to minimize coke deposition. [ABSTRACT FROM AUTHOR]

The growing population requires higher crop yields, and one promising approach is growing crops in less fertile lands. To do this successfully, we must understand how well different crops can tolerate salt stress. In this study, we evaluated the salt tolerance potential of five commercial Brassica cultivars (Westar, Faisal canola, Punjab canola, Nifa Gold, and Aari canola) under controlled conditions. We grew these cultivars in a medium with varying levels of NaCl (ranging from 0 to 300 mM). We measured different growth parameters and their root architecture using an automated root scanner. Salt stress affected the growth of all cultivars. However, one cultivar, Aari canola, showed remarkable resilience. It showed up to 1.4-fold higher germination, up to 9-fold higher germination index, up to 7.7-fold fresh weight, and 2.4-fold dry biomass than the rest of the cultivars under the stress conditions. While other cultivars demonstrated reductions of up to 31% in root volume, 20% in root surface area, and 19% in the number of root tips under salt stress, Aari canola displayed minimal changes in these parameters. Aari canola, however, exhibited a substantial reduction in root diameter (up to 60%). The cultivar's unique morphological adaptations in root architecture to salt stress, characterized by noticeable increases in root volume, surface area, and root tips at the cost of reduced root diameter, imply the presence of an intrinsic defensive mechanism against salinity, making it a good candidate for cultivation in saline terrains. [ABSTRACT FROM AUTHOR]

Simple Summary: Interest is increasing in grazing winter canola as an alternative crop in winter wheat rotations in the Southern High Plains of the USA and similar environments. In this study, winter cereal rye and winter canola pastures (forage) were compared for two winter growing seasons to determine the relative effect of pasture type on beef cattle performance, along with the effect of grazing on canola grain production. Canola grain yields were reduced by 25% when canola was grazed for approximately one month after grazing was initiated, but before the onset of rapid regrowth in spring. No differences existed for forage mass, nutritive value, or animal performance, although forage mineral composition of canola could be a concern. Grazing winter canola as a dual-purpose crop in semiarid environments is feasible when proper grazing management is applied; a 20–25% reduction in grain yield should be anticipated, but expect animal gains to offset that loss. Interest is increasing in grazing winter canola (Brassica napus) as an alternative crop in winter wheat (Triticum aestivum) rotations in the Southern High Plains (SHP) of the USA and similar environments. In this stidy, winter cereal rye (Secale cereale) and winter canola pastures (forage) were compared for two winter growing seasons at New Mexico State University's Rex E. Kirksey Agricultural Science Center at Tucumcari, NM, USA, to determine the relative effect of pasture type on late-gestation beef cows and growing yearling cattle, along with the effect of grazing on canola grain production. Canola grain yields were reduced by 25% when canola was grazed until removal approximately one month after grazing was initiated, but before the onset of rapid regrowth after winter (641 vs. 486 kg grain ha−1 for never grazed or grazed canola, respectively, p < 0.0256). No differences existed for forage mass, nutritive value, or animal performance, although forage mineral composition of canola could be a concern. Grazing winter canola as a dual-purpose crop in the SHP and similar environments is feasible when proper grazing management is applied; producers should anticipate a 20–25% reduction in grain yield, but expect animal gains to offset that loss. [ABSTRACT FROM AUTHOR]

SUMMARY: Genome‐wide association studies (GWAS) identified thousands of genetic loci associated with complex plant traits, including many traits of agronomical importance. However, functional interpretation of GWAS results remains challenging because of large candidate regions due to linkage disequilibrium. High‐throughput omics technologies, such as genomics, transcriptomics, proteomics and metabolomics open new avenues for integrative systems biological analyses and help to nominate systems information supported (prime) candidate genes. In the present study, we capitalise on a diverse canola population with 477 spring‐type lines which was previously analysed by high‐throughput phenotyping of growth‐related traits and by RNA sequencing and metabolite profiling for multi‐omics‐based hybrid performance prediction. We deepened the phenotypic data analysis, now providing 123 time‐resolved image‐based traits, to gain insight into the complex relations during early vegetative growth and reanalysed the transcriptome data based on the latest Darmor‐bzh v10 genome assembly. Genome‐wide association testing revealed 61 298 robust quantitative trait loci (QTL) including 187 metabolite QTL, 56814 expression QTL and 4297 phenotypic QTL, many clustered in pronounced hotspots. Combining information about QTL colocalisation across omics layers and correlations between omics features allowed us to discover prime candidate genes for metabolic and vegetative growth variation. Prioritised candidate genes for early biomass accumulation include A06p05760.1_BnaDAR (PIAL1), A10p16280.1_BnaDAR, C07p48260.1_BnaDAR (PRL1) and C07p48510.1_BnaDAR (CLPR4). Moreover, we observed unequal effects of the Brassica A and C subgenomes on early biomass production. Significance Statement: In crop plants, deciphering the genetic basis of complex traits, and the identification of causal genes based on GWAS results is a major challenge. Here, we demonstrate the power of combining extensive multi‐omics data, genome‐wide associations, QTL co‐localisations and system‐genetic analyses to pinpoint well supported candidate genes for metabolic variation, early vegetative growth and biomass accumulation despite extended regions of linkage disequilibrium typically present in an elite canola breeding population. [ABSTRACT FROM AUTHOR]

Crop rotations with residue incorporation can be beneficial to the sustainability of agriculture, however as long-term studies are required to determine effects on soil properties, farmers usually don't practice crop rotations. The objective of this study was to evaluate the effects of crop rotations with residue incorporation (0%, 50%, 100%, and 200%) on soil chemical properties of a volcanic soil after 4 years of cultivation. The evaluated rotations were canola (Brassica napus L.)-bread wheat (Triticum aestivum L.), canola-durum wheat (Triticum turgidum L.), canola-corn (Zea mays L.), bean (Phaseolus vulgaris L.)-bread wheat, bean-durum wheat, and bean-corn. The experiment consisted of six crop rotations, four levels of residue incorporation, and four replicates, analyzed as split-plot design. Samples were taken from the topsoil, and the following soil chemical properties were evaluated: pH, organic matter, electrical conductivity, nitrogen (N), phosphorous (P), potassium (K), calcium (Ca), magnesium (Mg), sodium (Na), aluminum (Al), and sulfur (S). The results showed that crop rotations affected all the chemical properties evaluated, whereas the level of residue incorporation only affected the concentrations of exchangeable Mg and K. Most of the evaluated crops rotations had beneficial effects on the soil properties. The canola-durum wheat crop rotation recorded the lowest values in OM, available N and the exchangeable Ca, Mg, and Na. Exchangeable Mg and K had a directly proportional relationship with the level of residue incorporation. In conclusion, the incorporation of residues in different doses during 4 years of crop rotation in this volcanic soil had little effect on its chemical properties. [ABSTRACT FROM AUTHOR]

Winter canola (Brassica napus L.) is a potential alternative to winter wheat in Oklahoma rotation systems as a means to overcome the negative impacts of continuous wheat systems. However, its performance may suffer in the acid soils that are common to intensive agriculture systems in the southern Great Plains region. The objective of this study was to quantify the impact of soil pH and Al3+ concentration on winter canola production. Two field trials were conducted in 2016 and 2017 across four different locations in central Oklahoma to evaluate the performance of four canola cultivars in soils with a range of pH from 4.0 to 8.0. Yield, soil pH, and Al3+ concentrations were measured from each plot to study the relationships between these variables. At all but one location, soil pH and Al3+ concentrations were inversely related and when data across these locations were combined, Al3+ concentrations decreased as pH increased to a critical value of 4.8 (r² = 0.83). In general, it was found that yield decreased linearly as pH decreased below 5.8 (r² = 0.75) and increased linearly as Al3+ concentrations decreased below 87 mg kg-1 (r² = 0.73). Above these thresholds, yield was unrelated to pH or Al3+ concentrations. It was also observed that at one location with very low naturally occurring Al3+, high canola yields were achievable even in low soil pH. Therefore, Al3+ concentrations may be a better indicator of the effects of acidic soils on winter canola yields than pH values alone. [ABSTRACT FROM AUTHOR]

In this study, the influence of diesel and biodiesel fuels with various flow rate of hydrogen (3 L per minute and 6 L per minute) addition through the intake manifold of a diesel engine was investigated at three different engine speed (1500 rpm, 1800 rpm, and 2100 rpm) by considering second law of thermodynamic as a different perspective. Energy, exergy, and sustainability analysis were evaluated by utilizing the data from the experiments. According to the results, it is enlightened that useful work energy ascends with the hydrogen addition in all engine speeds and the net work rates of all test fuels were found as highest at 1800 rpm engine speed while the rate of energy heat loss decreased with hydrogen addition. Furthermore, exergy input is also increased with the hydrogen addition to the engine whereas exergy destruction and exergy heat lost decreased with the increment of the hydrogen. The highest values of energy efficiency and exergy efficiency obtained at 1800 rpm engine speed by using diesel fuel with 6 L per minute hydrogen addition as 38.67 % and 35.09 %, respectively. The highest entropy generation occurred at 2100 rpm as 0.288 kW/K for the biodiesel fuel and the lowest value was observed as 0.201 kW/K for DH6 fuel at 1800 rpm. The analyses showed that the sustainability index values determined to be in the range of 1.437–1.541 and the increase in hydrogen ratio enhanced the sustainability index at all engine speeds and the DH6 and BH6 fuels are more sustainable fuels than the other experimental fuels. • Energy and exergy input augment with the enhancement of the hydrogen. • Energy heat loss, exergy heat lost, and exergy destruction and decreased with hydrogen addition. • The max. values of energy and exergy efficiency were obtained at 1800 rpm with DH6. • DH6 and BH6 fuels are more sustainable fuels than the other experimental fuels. [ABSTRACT FROM AUTHOR]

Canola hull, meal and straw are abundantly available as low-value agricultural residues in Canada. These lignocellulosic feedstocks have the potential for the generation of biofuels as alternatives to fossil fuels. Supercritical water gasification is an emerging hydrothermal process for the conversion of recalcitrant biomasses into value-added hydrogen with the application of water beyond its critical temperature and pressure. This study focuses on the comparative investigation of supercritical water gasification of canola residues for H 2 production through optimization of process temperature (350–500 °C), reaction time (20–80 min) and feedstock concentration (10–25 wt%) at a constant pressure of 23–25 MPa. Supercritical water gasification of canola straw resulted in a high H 2 yield of 7.1 mmol/g to 6.2 mmol/g of H 2 from canola hull and 5.5 mmol/g of H 2 from canola meal at a temperature, reaction time and feedstock concentration of 500 °C, 40 min and 20 wt%, respectively. Furthermore, H 2 yield and total gas yield from canola straw were maximized to 8.1 mmol/g and 29.7 mmol/g at the optimized supercritical water gasification conditions of 500 °C, 60 min and 10 wt%. Hydrochar obtained at high gasification temperatures also revealed aromatic carbon structures and thermal stability due to dehydrogenation, decarboxylation, deamination and aromatization. The overall results demonstrated the potential of supercritical water gasification as an evolving hydrothermal process to convert lignocellulosic biomass into high-value H 2 -rich gas. [Display omitted] • A comparative study of hydrothermal gasification of canola residues was performed. • Temperature, reaction time and feed concentration were optimized for H 2 production. • H 2 yield varied as canola straw (7.1 mmol/g) > hull (6.2 mmol/g) > meal (5.5 mmol/g). • Hydrochar at high temperatures revealed high aromatic carbon and thermal stability. • Water-gas shift, methanation and hydrogeneration affected H 2 , CO, CO 2 and CH 4 yields. [ABSTRACT FROM AUTHOR]

Soybean meal is more beneficial than canola meal (CM) due to the better balance of amino acids in the nutrition of broilers. Three experiments were conducted to assess the impact of replacing soybean meal with CM at different levels during the rearing stages of Ross 308 male broilers on performance, carcass traits, and liver enzyme concentrations. In the first experiment, 420 one-day-old chicks received starter diets with six graded levels of CM from 0 to 15% for 10 days. In the second experiment, 360 eleven-day-old chicks were fed six experimental grower diets varying in CM from 0 to 25% over 14 days. In the third experiment, three hundred 25-day-old chicks were subjected to six finisher diets ranging in CM from 0 to 40% over 18 days. The findings revealed that the inclusion of the CM at the examined levels had no adverse effects on broilers' performance, carcass traits, and liver enzymes in the first and second experiments (P>0.05). Dietary CM inclusion of more than 32% in the third experiment had significant adverse effects on the performance, European broiler index, and liver enzymes of broilers (P<0.05). In conclusion, the CM can be included in broiler diets at levels up to 15% during the starter and 20% during the grower periods without adversely affecting growth performance and carcass traits. Nonetheless, an inclusion level of CM exceeding 32% of the diet during the finisher period resulted in decreased weight gain and harmful effects on liver function. [ABSTRACT FROM AUTHOR]

Induced resistance in plants can be manipulated using the application of elicitors. In this study, the effects of Salicylic Acid (SA), chitosan, γ-Aminobutyric Acid (GABA), Serenad Aso (Bacillus subtilis QST713), and combined application of these elicitors were studied on the resistance of canola to cabbage aphid, Brevicoryne brassicae L. (Hemiptera: Aphididae). The number of B. brassicae attracted to canola plants treated with different inducers was significantly lower compared to the control in the field experiments. The lowest population density of aphid was observed on plants treated with SA+GABA and SA+chitosan. Moreover, the highest amounts of glucosinolates in canola leaves were recorded in SA+GABA treatment. The contents of sugar, lipid, and glycogen of B. brassicae were lowest when fed on the plants treated with SA integrated with GABA or chitosan. Furthermore, the activity of catalase, esterase, peroxidase and glutathione Stransferase enzymes was the lowest in SA+GABA and SA+chitosan. These findings suggest that exogenous application of SA integrated with GABA or chitosan on canola plants are successful in suppressing the B. brassicae population and can be considered in integrated management programs against this and other aphids. [ABSTRACT FROM AUTHOR]

Amending soil with manure from cattle fed biochar (BC) (biochar–manure [BM]) is a potential best management practice to improve plant nutrition in the circular economy. Yet, information concerning the agronomic performance of BM under temperate field conditions is scarce. A 2‐year study on a Gray Luvisol was conducted to determine the effect of BM on the crop growth of spring wheat (Triticum aestivum L.), followed by canola (Brassica napus L.), soil fertility, and microbial function. Treatments included (i) no amendments (control), (ii) BC at 5 and 10 Mg·ha−1 (BC5 and BC10), (iii) regular stockpiled manure (RM) at 100 kg total N·ha−1, (iv) stockpiled BM at 100 kg total N·ha−1, and (v) BC and RM (BC+RM) or BC and BM (BC+BM) at the aforementioned rates. During the wheat growing season in 2020, which had high precipitation, grain yield was 2.4 times greater in BM+BC10 than in BM alone (1416 vs. 579 kg·ha−1, p < 0.001), highlighting synergistic effects of BM together with BC application on agronomic performance. Conversely, lower precipitation and warmer temperatures in the canola growing season in 2021 hampered any statistical differences among treatments. While soil microbial biomass did not change by the end of the experiment, shifts toward amino acid utilization with BC additions in both crops potentially influenced crop growth and nitrogen‐use efficiency. In summary, BM+BC at 10 Mg·ha−1 performed best in this study during the first cropping season under cold and rainy conditions. Core Ideas: Biochar and biochar–manure additions increased wheat production.There were shifts toward amino acid utilization with biochar additions.Precipitation and temperature played an essential part in level of biochar addition benefits. [ABSTRACT FROM AUTHOR]

A collection of isolates of the fungi Leptosphaeria maculans and L. biglobosa, which cause blackleg disease on Brassica napus (canola/oilseed rape) and other Brassicaceae species, was assembled to represent the global diversity of these pathogens and a resource for international research. The collection consists of 226 isolates (205 L. maculans and 21 L. biglobosa) from 11 countries. The genomes of all 205 L. maculans isolates were sequenced, and the distribution and identity of avirulence gene alleles were determined based on genotypic information and phenotypic reactions on B. napus lines that hosted specific resistance genes. Whilst the frequencies of some avirulence alleles were consistent across each of the regions, others differed dramatically, potentially reflecting the canola/oilseed rape cultivars grown in those countries. Analyses of the single‐nucleotide polymorphism (SNP) diversity within these L. maculans isolates revealed geographical separation of the populations. This "open access" resource provides a standardized set of isolates that can be used to define the basis for how these fungal pathogens cause disease, and as a tool for discovery of new resistance traits in Brassica species. [ABSTRACT FROM AUTHOR]

Leptosphaeria maculans is a fungal pathogen that causes blackleg disease in canola (Brassica napus), resulting in significant yield and economic losses in Canada and many parts of the world. Plant NAC transcription factors play critical roles in plant development and response to biotic or abiotic stress. In this study, we identified and characterized a BnNAC19 gene from Brassica napus. The overexpression of BnNAC19 in transgenic canola plants contributed to the improvement of seedling resistance against L. maculans. The mycelial growth of a green fluorescent protein‐tagged strain of L. maculans and production of pycnidiospores were shown to be inhibited in the transgenic canola plants overexpressing BnNAC19. In addition, the canola transgenic line overexpressing BnNAC19 showed increased disease resistance in the adult plant, which was determined by quantitative resistance. Both increased seedling and adult plant resistance in transgenic canola plants overexpressing BnNAC19 indicate that the BnNAC19 gene plays a positive role against L. maculans. The expression pattern of genes BnNAC19 upstream and downstream of BnNAC19 that participate in plant defence pathways were investigated to elucidate the B. napus resistance mechanisms to L. maculans infection, and hence to aid the long‐term blackleg disease‐resistant breeding programmes. [ABSTRACT FROM AUTHOR]

This document is a collection of abstracts from the Canadian Journal of Plant Pathology. The abstracts cover a range of topics related to plant pathology and disease management. The first abstract discusses the potential of microbial agents to restore garlic seed stocks with latent fusarium infections. The second abstract explores the use of Bacillus amyloliquefaciens as a biocontrol agent in cannabis and other crops. The third abstract focuses on phosphate solubilizing microbes and their dual potential as bio-fertilizers and bio-fungicides. The fourth abstract presents a study on estimating fusarium head blight severity in winter wheat using deep learning and a spectral index. The fifth abstract examines the resistance of Stemphylium vesicarium in onions to two SDHI fungicides. The final abstract discusses the management of Verticillium stripe disease in canola through genetics and understanding the interaction between Brassica napus and Verticillium longisporum. These abstracts provide valuable insights into the field of plant pathology and offer potential solutions for disease management in various crops. [Extracted from the article]

This study aimed to investigate the effects of grains, and protein sources in the starter diet on daily gain, pro- and anti-inflammatory genes expression, ruminal volatile fatty acid (VFA) concentration, and blood metabolites in the dairy calves. Forty Holstein calves were randomly assigned to treatments in a 2 × 2 factorial arrangement with the factors of grain source (steam-flaked corn, CG vs. steam-rolled barley, BG) and pelleted protein source (soybean meal, SBM vs. canola meal, CM). The daily gain of calves who fed with SBM was higher than those fed with CM. Total VFA concentration in the rumen of calves fed with CG was greater than BG at day 35 (p < 0.05), and calves receiving SBM had higher total VFA concentration than calves fed with CM. The relative expression of tumor necrosis factor-α and interleukin-1β genes were significantly decreased in the calves fed with BG and CM compared to calves fed with CG and SBM. Calves receiving the starter diet based on BG had the highest (p < 0.05) gene expression of interferon-γ. Feeding calves with SBM is recommended because it resulted in a greater daily gain than CM. Complete replacement of SBM with CM, and CG with BG is not recommended in dairy calves. [ABSTRACT FROM AUTHOR]

Canola is the second-largest cultivated oilseed crop in the world and produces meal consisting of about 35–40% proteins. Despite this, less than 1% of the global plant-based protein market is taken up by canola protein. The reason behind such underutilization of canola protein and its rapeseed counterpart could be the harsh conditions of the industrial oil extraction process, the dark colour of the meal, the presence of various antinutrients, the variability in the protein composition based on the source, and the different properties of the two major protein components. Although academic research has shown immense potential for the use of canola protein and its rapeseed counterpart in emulsion development and stabilization, there is still a vast knowledge gap in efficiently utilizing canola proteins as an effective emulsifier in the development of various emulsion-based foods and beverages. In this context, this review paper summarizes the last 15 years of research on canola and rapeseed proteins as food emulsifiers. It discusses the protein extraction methods, modifications made to improve emulsification, emulsion composition, preparation protocols, and emulsion stability results. The need for further improvement in the scope of the research and reducing the knowledge gap is also highlighted, which could be useful for the food industry to rationally select canola proteins and optimize the processing parameters to obtain products with desirable attributes. [ABSTRACT FROM AUTHOR]

In the current industrial scenario, cadmium (Cd) as a metal is of great importance but poses a major threat to the ecosystem. However, the role of micronutrient − amino chelates such as iron − lysine (Fe − lys) in reducing Cr toxicity in crop plants was recently introduced. In the current experiment, the exogenous applications of Fe − lys i.e., 0 and10 mg L − 1, were examined, using an in vivo approach that involved plant growth and biomass, photosynthetic pigments, oxidative stress indicators and antioxidant response, sugar and osmolytes under the soil contaminated with varying levels of Cd i.e., 0, 50 and 100 µM using two different varieties of canola i.e., Sarbaz and Pea − 09. Results revealed that the increasing levels of Cd in the soil decreased plant growth and growth-related attributes and photosynthetic apparatus and also the soluble protein and soluble sugar. In contrast, the addition of different levels of Cd in the soil significantly increased the contents of malondialdehyde (MDA) and hydrogen peroxide (H2O2), which induced oxidative damage in both varieties of canola i.e., Sarbaz and Pea − 09. However, canola plants increased the activities of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and non-enzymatic compounds such as phenolic, flavonoid, proline, and anthocyanin, which scavenge the over-production of reactive oxygen species (ROS). Cd toxicity can be overcome by the supplementation of Fe − lys, which significantly increased plant growth and biomass, improved photosynthetic machinery and sugar contents, and increased the activities of different antioxidative enzymes, even in the plants grown under different levels of Cd in the soil. Research findings, therefore, suggested that the Fe − lys application can ameliorate Cd toxicity in canola and result in improved plant growth and composition under metal stress. [ABSTRACT FROM AUTHOR]

Our study investigates prospects for a fuel-grade canola oil supply chain that prioritizes the use of non-No. 1 Canola as a biofuel feedstock. Using low-grade canola oil to produce biofuels can reduce feedstock costs and offer the opportunity to utilize existing petroleum infrastructure to transport and store canola oil, thereby reducing capital costs for biorefinery investments. We conducted a township-level GIS analysis to assess the availability of canola seed in Alberta and identify potential fuel-grade crushing sites based on the amount of annually accessible non-No. 1 Canola. Using an improved service-area approach, we identify three potential sites for fuel-grade crushers, all of which had sufficient seed to produce, on average, over 65 thousand tonnes of oil per year (from 2016 to 2019). Northwestern Alberta appears to be especially suitable for a fuel-grade canola crushing plant, since it has the highest average amounts of non-No. 1 seed, and there are no existing food-grade crushers to compete with. Results further show that spatial and temporal variation in canola harvests impacts how much non-No.1 seed is available and could therefore influence investment decisions on where to locate fuel-grade canola crushing plants. New fuel-grade crushing plants could also stimulate regional development and boost incomes for local canola producers. Our analysis is relevant to policy and business decisions related to fuel-grade canola oil supply chain investments. [ABSTRACT FROM AUTHOR]

Background: Rapeseed (Brassica napus L.) also known as 'rape' is bright yellow flowering member of family Brassicaceae, cultivated for its oil rich seed. It is third most important oilseed crop after soybean and oil palm. Despite an important oilseeds crop there is little advancement in suitable crop management strategies for improving crop productivity. The SRI has set of principles such as use of young seedlings, one seedling per hill, square planting, mechanical weeding, addition of organic matter. Recently the SRI is being successfully experimented in other crops such as wheat, maize, soybean, blackgram, kidney bean, potato in the name of System of Crop Intensification. Methods: This research experiment was carried out at the Student's Research Farm, Khalsa College, Amritsar during the rabi season of 2018-19. The Split plot design with three replications was carried under age of seedling in main plot treatments A1 [20 day seedling], A2 [30 day seedling] and A3 [40 day seedling] and four intra row spacing treatments in sub plots S1 [15 cm], S2 [30 cm], S3 [45 cm] and S4 [60 cm]. Result: Seed yield decreased progressively with increase in age of seedling. Wider spacing between plants (45 cm) observed high number of siliquae per plant than closer spacing (15 cm). Seed yield was significantly highest when crop was transplanted with 45 cm intra row spacing. The percent increase in seed yield in different SMI (System of Mustard Intensification) spacing treatments over closer spacing S1 (15 cm) were 21.62, 6.36, 4.89, per cent in S3, S4 and S2 respectively. [ABSTRACT FROM AUTHOR]

With the aim of evaluate the thermal tolerance of twelve suspoemulsion formulations containing conidia of I. javanica (at low and high moisture content) as an active ingredient and the biological effectiveness in the greenhouse, we developed twelve oil-based formulations of I. javanica with canola, castor bean, corn, soybean, peanut and mineral oil and surfactant mixtures: six formulations with conidia at low humidity (5-7%) and six with conidia at higher humidity (40-50%). Formulations were developed using the HLB system; Span 80 (HLB 4.3) and Tween 80 (HLB 15) like surfactants were mixed with oils. Thermotolerance was evaluated after exposure to 45 °C for 2, 8 and 24 h. Additionally, to evaluate the functionality of the formulations, greenhouse bioassays were performed using tomato plants infested with Bemisia tabaci. To determine the viability and shelf life, 10 mL of each formulation was stored for 5 and 9 months, and the storage temperature oscillated between 12 and 34 °C (at typical room temperature), with 12 / 12 h light / dark cycles, after 9 months of storage. The viability of unformulated conidia and those contained in the formulations was >82% after exposure to 45 °C for 2 h. The B (mineral oil), C (corn, soybean and peanut oils), D (corn oil), E (canola and soybean oils), and F (castor oil) formulations (low humidity), unformulated conidia and PAE-SIN caused mortality ranging from 43-56%. The conidia in formulations on oil exhibited 53-65% viability at 24 h and were statistically similar to each other but significantly different from the conidia (unformulated) with the viability 5%; at 72 h, the viability of conidia in all formulations was 78-88%, and the values were statistically similar to each other but significantly different from that of the conidia (unformulated) with the viability 6%. The formulations evaluated in this work presented lethality in B. tabaci nymphs 1-4, it is also suggested that these formulations confer thermal protection acquired by the formulation since unformulated conidia are drastically affected. The humidity of the conidia in the moment of developing formulations is a factor that affects the final tolerance and the viability in the shelf life. [ABSTRACT FROM AUTHOR]

In plants, an increasing number of traits and new characteristics are being developed using gene editing. Simple traits represented by a single gene can be managed through backcross breeding, but this is typically not the case for more complex traits which may result from the function of a large number of genes. Here, we demonstrate two case studies of improving oleic oil content and developing pod shatter reduction in Brassica napus by using gene editing tools on an industrial scale. There are four BnaFAD2 genes involved in oleic oil content and eight BnaSHP genes involved in pod shatter tolerance. In order to develop these two traits, we delivered nuclease ribonucleoproteins with Gene Repair OligoNucleotides (GRONs) into protoplasts, with subsequent regeneration into plants on an industrial scale, which encompassed robust tissue culture protocols, efficient gene editing, robotics sampling, and molecular screening, vigorous plant regeneration, growth, and phenotyping. We can produce precise loss-of-function-edited plants with two improved agronomically important complex traits, high oleic oil or pod shatter reduction, in elite canola varieties within 1-3 years, depending on the trait complexity. In the edited plants carrying loss of function of four BnaFAD2 genes, the seed fatty acid oleic acid content reached 89% compared to 61% in the non-edited wildtype control. The plants carrying eight edited BnaSHP genes achieved 51% pod shatter reduction in multiple year field testing in the target environment compared to the wildtype control. [ABSTRACT FROM AUTHOR]

To improve the accuracy of canola identification in the southwest cloudy and foggy mountains of China, this letter puts forward a group of canola recognition features with the multi-temporal Sentinel-1 images. The Jeffries-Matusita (J-M) distance of sample types and the accuracy of canola extraction of support vector machine were compared. The results showed that the J-M values of canola crop with forest land and other green vegetation were improved obviously, among which the J-M value of forest land category increased to 1.93, and that of other green vegetation 1.82. The producer's accuracy (PA) of canola was improved to 70.93%, and the user's accuracy (UA) was increased to 75.86% with F1-measure 73.31%. The canola crop area recognition accuracy was 82.58%. The feature combination can enhance the distinguishability among sample categories, improve the extraction accuracy of canola crops, but the results still have a gap with the reliable results proposed by previous scholars due to the complex crops planting structure, the irregularity of the plot and the resolution of Synthetic Aperture Radar (SAR) images. This research can provide a reference for the distribution extraction of canola in mountain areas. [ABSTRACT FROM AUTHOR]

Effects of replacing canola meal with dehulled hemp meal in the diet of lactating dairy cows on the dry matter intake (DMI), milk production, milk fatty acid profile, blood metabolites, total-tract nutrient digestibility, and transfer of cannabinoids were determined in 12 lactating, nonpregnant Holstein cows. These cows were used in a 3 × 3 Latin square design with three 3-wk experimental periods consisting of 2 wk of adaptation and 1 wk of sampling. Cows received basal partial mixed rations supplemented with either 15% dry matter (DM) canola meal (CM15), 15% DM dehulled hemp meal (HM15), or 7.5% DM dehulled hemp meal and 7.5% DM canola meal (CM7.5HM7.5). Diets were formulated to be isoenergetic and isonitrogenous, but the HM15 and CM7.5HM7.5 diets contained, on average 1.2 percentage units more crude protein (CP) that the CM15 diet. The CP of the dehulled hemp meal contained less soluble protein than that of canola meal. Hence, the intake of soluble protein did not differ among diets. Canola meal contained less crude fat than hemp seed meal (3.46% vs. 8.25% DM). The lipid fraction of canola meal fat contained more oleic acid (C18:1 cis -9; 47.3 vs. 14.9 g/100 g of fatty acids, FA) and vaccenic acid (18:1 cis -11; 13.7 vs. 1.2 g/100 g of FA) and less linoleic acid (C18:2n-6; 21.9 vs. 55.7 g/100 g of FA) and α linolenic acid (C18:3n-3; 3.2 vs. 8.9 g/100 g of FA) than the lipid fraction of hemp seed meal. The hemp seed meal contained 4.9 µg/g cannabidiol, 5.1 µg/g cannabidiolic acid, and 0.1 µg/g tertahydroxycannabinolic acid A. Treatments did not differ in DMI, yields of milk, milk protein and milk fat, total-tract neutral detergent fiber digestibility, and blood plasma concentrations of β-hydroxybutyrate and nonesterified FA. Apparent total-tract DM digestibility was lowest in the HM15 treatment, whereas the CP digestibility and the concentrations of urea in blood, urine, and milk were lowest in the CM15 treatment. Cannabinoids were not detected in urine, milk, and blood plasma. Replacing canola meal with hemp seed meal increased milk fat contents of polyunsaturated fatty acids (PUFA), which were 3.42, 3.90, and 4.25 g/100 g of FA for the CM15, CM7.5HM7.5, and HM15 treatments, respectively. Especially, the milk fat contents of 18:2n-6 (1.99 vs. 1.56 g/100 g FA) and 18:3n-3 (0.31 vs. 0.43 g/100 g FA) were increased by hemp meal feeding. Especially, the milk fat contents of 18:2n-6 (1.99 vs. 1.56 g/100 g FA) and 18:3n-3 (0.31 vs. 0.43 g/100 g FA) were increased by hemp meal feeding. Our data show that hemp seed meal is a suitable and safe replacement for canola meal as a feed for lactating dairy cows and that this replacement increases CP digestibility and urea in urine, milk, and blood plasma, as well the PUFA content of milk fat. [ABSTRACT FROM AUTHOR]

Inhomogeneous lignin from a canola (rapeseed) straw was isolated and valorized as regularly shaped spherical microparticles for drug delivery formulations. Lignin with a purity of 83% and broad molecular weight distribution (Ð > 5.0) was extracted by alkali pulping and acetylated to increase spheronization ability. Lignins with high degrees of acetylation (0.76 and 0.89) were successfully assembled into microparticles with uniform sizes (approximately 2 μm) and smooth spherical surfaces via solvent–antisolvent precipitation. Hydrophobic coumarin 153 and positively charged ciprofloxacin were used as model drugs to assess the encapsulation and release performance of lignin microparticles. Highly acetylated lignin microparticles displayed encapsulation efficiencies of 89.6% for coumarin 153% and 90.6% for ciprofloxacin. Scanning electron microscope images showed that coumarin 153 was encapsulated in the hydrophobic core, while ciprofloxacin was adsorbed on the less hydrophobic shell. The synthesis of lignin microcarriers not only provides a facile approach to utilizing waste canola straw lignin for drug delivery matrices but also has the potential to serve as an alternative lignin powder feedstock for bio-based materials. [ABSTRACT FROM AUTHOR]

Brassica is an essential genus in agriculture, and gene flow from living modified (LM) organisms to native relatives or non-modified cultivars of the crucifer family is a critical issue in Asia. Loop-mediated isothermal amplification (LAMP) is a simple, rapid, and accurate method for identifying LM crops. This study aimed to develop a LAMP assay for the laboratory diagnosis and field analysis of three novel LM canola events: T45, 73496, and MON88302. The genomic DNA of each LM canola was amplified by incubating at 63 °C for 30 min with a newly developed 2 × LAMP premix containing Bst DNA polymerase and event-specific primer sets. The sensitivity of the LAMP assay for the three canola events in our condition ranged from 100 pg·μL−1 to 1 ng·μL−1. Genetic elements of the three LM events were identified through a combination of the LAMP assay, a syringe-type DNA extraction kit, and a portable isothermal amplifier. This study proposes a novel, simple system based on isothermal amplification for the DNA detection of the three LM canola events in a survey field. [ABSTRACT FROM AUTHOR]

Globally, insect pollinators that are linked to increased yields in many crops have experienced severe population declines. Crop diversification is often proposed as an effective conservation measure to boost pollinator populations. Here, we investigate the potential benefits of mixed oilseed rape/milk vetch cultivation for wild pollinator communities by comparing it with oilseed rape monocultures. Studying 8 mixed and 10 monocropping fields positioned along a gradient of increasing semi‐natural habitat coverage in mountainous agricultural landscapes, we found that agricultural landscapes with mixed cultivation harboured higher wild pollinator diversity than oilseed rape monocropping landscapes. This positive effect was observed irrespective of the proportion of semi‐natural habitat. Meanwhile, the pollinator community composition in mixed cultivation landscapes was similar to that of oilseed rape monoculture landscapes, and, contrary to expectations, mixed cultivation did not benefit specific pollinator trait groups like cavity‐nesting bees. Overall, we believe the higher pollinator diversity linked to mixed cultivation can increase insect‐pollinated crop yields, and mixed oilseed rape‐milk vetch cultivation might represent a potential mitigation measure for the negative impacts agricultural intensification has on wild pollinator communities. [ABSTRACT FROM AUTHOR]

Context: Limitations to crop yield due to subsurface (5–15 cm depth) compaction layers (>2 MPa) and subsurface acidity (pHCa <4.8) have frequently been reported on the non-sodic soils of south-eastern Australia, but amendment studies have been limited in number and inconsistent in the extent and longevity of any response. Aim: We tested the hypothesis that amendment of subsurface acidity and compaction would lead to increased grain yield. Method: We investigated crop response to the alleviation of these combined subsurface soil constraints by using deep ripping and dry limestone injection to 30 cm depth over 3 years in a canola–cereal sequence. Key results: Deep tillage and injection of limestone into the soil both failed to produce significant grain yield responses in any year, despite the reduction of soil strength and increase in pH in subsurface layers. Early vegetative growth sometimes responded to the treatments, but the loss of stored soil water during drier than average seasons appeared to limit grain response. However, we also observed that a proportion of plant roots penetrated these relatively thin constraint layers in unamended soils. Conclusions: Amelioration of subsurface acidity and compaction does not necessarily increase grain yield. Implications: The effects of subsurface acidity and compaction should be tested on other species and during varying rainfall deciles. Given the potentially large resource requirements for deep amendment of soils, we propose that the selection of tolerant species and cultivars might be more effective in the short term. Recorded apparent declines in canola grain yield have been associated with abnormal canola roots. We investigated the amelioration of low subsurface soil pH and hardpans by deep lime placement and deep ripping. Despite increased soil pH and lower soil strength in the subsurface soil, there were no significant grain yield responses in either canola or cereals during drier than normal years. [ABSTRACT FROM AUTHOR]

Rancid animal fats unsuitable for human or animal food production represent low‐value and abundant, yet underexploited organic chemical precursors. The current work describes a strategy to synthesize high sulfur‐content materials (HSMs) that directly utilizes a blend of partially hydrolyzed chicken fat and plant oils as the organic comonomers, following up on analogous reactions using brown grease in place of chicken fat. The reaction of sulfur and chicken fat with either canola or sunflower oil yielded crosslinked polymer composites CFSx or GFSx, respectively (x = wt% sulfur, varied from 85%–90%). The composites exhibited compressive strengths of 24.7–31.7 MPa, and flexural strengths of 4.1–5.7 MPa, exceeding the value of established construction materials like ordinary Portland cement (compressive strength ≥17 MPa required for residential building, flexural strength 2–5 MPa). The composites also exhibited thermal stability up to 215–224 °C. The simple single‐step protocol described herein represents a way to upcycle an affordable and previously unexploited animal fat resource to form structural composites via the atom economical inverse vulcanization mechanism. [ABSTRACT FROM AUTHOR]

Oilseed rape (Brassica napus L.) is a significant agro‐economic crop with a wide range of uses. Drought is the most frequent unfavourable environmental stressor restraining its growth and development worldwide. This study was conducted to characterize the drought‐responsive phenylpropanoid pathway and its link to hormonal changes in two cultivars, drought‐resistant "Saturnin" and drought‐susceptible "Mosa." Drought susceptibility in cv. Mosa was confirmed by its lower water use efficiency and higher lipid peroxidation levels with reactive oxygen species (ROS) accumulation. In cv. Saturnin, higher salicylic acid (SA) levels and expression of dehydration‐responsive element binding 2 (DREB2) and non‐expressor of pathogenesis‐related gene 1 (NPR1) led to an upregulation of production of anthocyanin pigment 1 (PAP1) and phenylpropanoid pathway‐related gene (CHS, F5H and COMT1) expression, increasing hydroxycinnamic acid and flavonoid compound concentrations. However, in cv. Mosa, higher increases in the activity of lignifying enzymes (polyphenol oxidase, coniferyl alcohol peroxidase, syringaldazine peroxidase, guaiacol peroxidase) and expression of the lignin synthesis‐related gene cinnamyl alcohol dehydrogenase 2 (CAD2) were found along with greater increases in abscisic acid (ABA) levels and upregulation of ABA‐responsive element binding 2 (AREB2) and basic helix–loop–helix transcription factor MYC2. These results indicate that drought‐induced SA‐mediated activation of the hydroxycinnamic acid and flavonoid pathways contributes to drought resistance, whereas ABA‐mediated lignification contributes to drought susceptibility. [ABSTRACT FROM AUTHOR]

The global demand for crop production is rapidly growing due to the continued rise in world population. Crop productivity varies generally with soil nutrient profile and climate. The optimal use of fertilizers might help to attain higher crop yield in canola. To circumvent nutrient imbalance issues in soil, two separate field trials were conducted to determine (a) the best source of nitrogen (N) between ammonium sulfate (NH4)2SO4) and ammonium nitrate (NH4NO3), (b) significance of gibberellic acid (GA3) and potassium (K), in an attempt to enhance canola yield and yield attributes. Both experiments were carried out in randomized complete block design (RCBD) with three replicates. The nitrogen source in the form of NH4)2SO4 (0, 10, 20 and 30 kg/ha) and NH4NO3 (0, 50, 75 and 100 kg/ha) was applied in the rhizosphere after 3 and 7 weeks of sowing, referred to as experiment 1 (E1). In another separate experiment (E2), the canola crop was sprayed with four level of GA3 (0, 10, 15, 30 g/ha) and K (0, 2.5, 3.5, 6 g/ha) individually or in combination by using hydraulic spryer, 30 days after sowing (DAS). The data was collected at different growth stages of canola and analyzed statistically. The E1 trail showed that N fortification in the form of NH4NO3 (100 kg/ha) and (NH4)2SO4 (30 kg/ha) had a positive effect on the plant height, number of branches, fruiting zone, seed yield per plant, seed yield per hectare of canola except oil percentage. Moreover, canola plants (E2) also displayed a significant improvement on all studied features with high doses of GA3 (30 g/ha) and K (6 g/ha) individualy and in combined form. The correlation coefficient analysis of (NH4)2SO4 and NH4NO3 was highly significant to plant height, number of branches, fruiting zone, seed yield per plant, seed yield per hectare of canola In a nutshell, compared to both source of N, NH4NO3 was more efficient and readily available source of N. GA3 being a growth elicitor and potassium as a micronutrient serve as potential source to improve yield and to manage nutrient profile of canola. [ABSTRACT FROM AUTHOR]

Due to the expanding population and the constantly changing climate, food production is now considered a crucial concern. Although passive satellite remote sensing has already demonstrated its capabilities in accurate crop development monitoring, its limitations related to sunlight and cloud cover significantly restrict real-time temporal monitoring resolution. Considering synthetic aperture radar (SAR) technology, which is independent of the Sun and clouds, SAR remote sensing can be a perfect alternative to passive remote sensing methods. However, a variety of SAR sensors and delivered SAR indices present different performances in such context for different vegetation species. Therefore, this work focuses on comparing various SAR-derived indices from C-band and (Sentinel-1) and X-band (TerraSAR-X) data with the in situ information (phenp; pgy development, vegetation height and soil moisture) in the context of tracking the phenological development of corn, winter wheat, rye, canola, and potato. For this purpose, backscattering coefficients in VV and VH polarizations (σ V V 0 , σ V H 0 ), interferometric coherence, and the dual pol radar vegetation index (DpRVI) were calculated. To reduce noise in time series data and evaluate which filtering method presents a higher usability in SAR phenology tracking, signal filtering, such as Savitzky–Golay and moving average, with different parameters, were employed. The achieved results present that, for various plant species, different sensors (Sentinel-1 or TerraSAR-X) represent different performances. For instance, σ V H 0 of TerraSAR-X offered higher consistency with corn development (r = 0.81), while for canola σ V H 0 of Sentinel-1 offered higher performance (r = 0.88). Generally, σ V V 0 , σ V H 0 performed better than DpRVI or interferometric coherence. Time series filtering makes it possible to increase an agreement between phenology development and SAR-delivered indices; however, the Savitzky–Golay filtering method is more recommended. Besides phenological development, high correspondences can be found between vegetation height and some of SAR indices. Moreover, in some cases, moderate correlation was found between SAR indices and soil moisture. [ABSTRACT FROM AUTHOR]

In this work, we present the results of the inoculation of canola seeds (Brassica napus L.) with Trichoderma viride strains that promote the growth of plants. Seven morphologically different strains of T. viride (TvI-VII) were shown to be capable of synthesizing auxins and exhibited cellulolytic and pectinolytic activities. To gain a deeper insight into the molecular mechanisms underlying canola–T. viride interactions, we analyzed the canola stress genes metallothioneins (BnMT1-3) and stringent response genes (BnRSH1-3 and BnCRSH). We demonstrated the presence of cis-regulatory elements responsive to fungal elicitors in the promoter regions of B. napus MT and RSH genes and observed changes in the levels of the transcripts of the above-mentioned genes in response to root colonization by the tested fungal strains. Of the seven tested strains, under laboratory conditions, T. viride VII stimulated the formation of roots and the growth of canola seedlings to the greatest extent. An experiment conducted under field conditions during drought showed that the inoculation of canola seeds with a suspension of T. viride VII spores increased yield by 16.7%. There was also a positive effect of the fungus on the height and branching of the plants, the number of siliques, and the mass of a thousand seeds. We suggest that the T. viride strain TvVII can be used in modern sustainable agriculture as a bioinoculant and seed coating to protect B. napus from drought. [ABSTRACT FROM AUTHOR]