Search

The hard palate plate has an important structural function that separates the nasal cavity and the nasopharynx. Incomplete regeneration of palatal fistulae in children with a cleft palate deformity after primary palatoplasty is a relatively common complication. To date, the information about the physicochemical bone features of this region is deficient, due to the low availability of human samples. Swine and human bone share anatomical similarities. Specifically, pig bones are widely used as experimental animal models in dental, orthopedic, or surgical techniques. The aim of this study was to show different techniques to evaluate and characterize alternative properties of pig hard palate bone, compared to commercial hydroxyapatite, one of the most used biomaterials for bone tissue regeneration. Chemical analyses by Energy dispersive spectroscopy (EDS) and X-ray fluorescence (XRF) showed calcium and phosphate ions as the main constituents of bone, while magnesium, iron, sodium, potassium, and zinc ions were minor constituents. The calcium phosphate molar ratio (Ca/P) in the bone was low (1.1 ± 0.2) due to the very young specimen sample used. The FTIR spectrum shows the presence of phosphates ions (PO43-) and the main characteristics of collagen type I. The XRD results showed that the hard palate bone has a mixture of calcium, octacalcium dihydrogen phosphate (OCP), and apatite, where OCP is the predominant phase. Besides, this research demonstrated that the young bone has low crystallinity and small crystal size compared with commercial hydroxyapatite (HA). The palatine process of maxilla density and porosity data reported, suggest that the palate bone is getting closer to the compact bone with a 52.78 ± 2.91% porosity and their mechanical properties depend on the preparation conditions and the area of the bone analyzed.

A comparative study was conducted on the efficiency of mercury removal using bacterial nanocellulose (BNC) membranes obtained from the fermentation of the microorganism Komagataeibacter medellinensis, in contrast with its oxidized analog obtained by modifying the bacterial nanocellulose membranes via oxidation with 2,2,6,6-Tetramethylpiperidine-1-oxyl. Both types of membranes (modified and unmodified) were characterized to identify variations in the Physico-chemical parameters after modification. FTIR spectra confirmed the chemical modification of cellulose in all reaction conditions by the presence of a new characteristic band at ∼1730 cm−1, corresponding to the new carboxylic groups produced by the oxidative process, and the decline of the band at ∼1,650 cm−1, corresponding to the hydroxyl groups of the C6 carbon. While the XRD profiles indicated that the percentage of BNC crystallinity decreased and the SEM images showed that the nanoribbon network was interrupted as the amount of oxidizing agent increased. The kinetics of mercury removal from both types of membrane was evaluated by calculating the concentration of mercury at different times and establishing a mathematical model to describe the kinetics of this process. The modified membranes improved significantly the adsorption process of the metal ion and it was found that the modification that results in the greatest adsorption efficiency was BNC-m 7.5 with a value of 92.97%. The results obtained suggest that the modification of the bacterial nanocellulose membranes by oxidation transcendentally improves the mercury removal capacity, outlining the modified membranes as an excellent material for mercury removal in wastewater.

Bacterial nanocellulose (BNC) has a negative surface charge in physiological environments, which allows the adsorption of calcium ions to initiate the nucleation of different calcium phosphate phases. The aim of this study was to investigate different methods of mineralization in three-dimensional microporous bacterial nanocellulose with the intention of mimicking the composition, structure, and biomechanical properties of natural bone. To generate the 3D microporous biomaterial, porogen particles were incorporated during BNC fermentation with the Komagataeibacter medellinensis strain. Calcium phosphates (CPs) were deposited onto the BNC scaffolds in five immersion cycles, alternating between calcium and phosphate salts in their insoluble forms. Scanning electron microscopy (SEM) showed that the scaffolds had different pore sizes (between 70 and 350 µm), and their porous interconnectivity was affected by the biomineralization method and time. The crystals on the BNC surface were shown to be rod-shaped, with a calcium phosphate ratio similar to that of immature bone, increasing from 1.13 to 1.6 with increasing cycle numbers. These crystals also increased in size with an increasing number of cycles, going from 25.12 to 35.9 nm. The main mineral phase observed with X-ray diffraction was octacalcium dihydrogen hexakis phosphate (V) pentahydrate (OCP). In vitro studies showed good cellular adhesion and high cell viability (up to 95%) with all the scaffolds. The osteogenic differentiation of human bone marrow mesenchymal stem cells on the scaffolds was evaluated using bone expression markers, including alkaline phosphatase, osteocalcin, and osteopontin. In conclusion, it is possible to prepare 3D BNC scaffolds with controlled microporosity that allow osteoblast adhesion, proliferation, and differentiation.

The hard palate plate has an important structural function that separates the nasal cavity and the nasopharynx. Incomplete regeneration of palatal fistulae in children with a cleft palate deformity after primary palatoplasty is a relatively common complication. To date, the information about the physicochemical bone features of this region is deficient, due to the low availability of human samples. Swine and human bone share anatomical similarities. Specifically, pig bones are widely used as experimental animal models in dental, orthopedic, or surgical techniques. The aim of this study was to show different techniques to evaluate and characterize alternative properties of pig hard palate bone, compared to commercial hydroxyapatite, one of the most used biomaterials for bone tissue regeneration. Chemical analyses by Energy dispersive spectroscopy (EDS) and X-ray fluorescence (XRF) showed calcium and phosphate ions as the main constituents of bone, while magnesium, iron, sodium, potassium, and zinc ions were minor constituents. The calcium phosphate molar ratio (Ca/P) in the bone was low (1.1 ± 0.2) due to the very young specimen sample used. The FTIR spectrum shows the presence of phosphates ions (PO 4 3- ) and the main characteristics of collagen type I. The XRD results showed that the hard palate bone has a mixture of calcium, octacalcium dihydrogen phosphate (OCP), and apatite, where OCP is the predominant phase. Besides, this research demonstrated that the young bone has low crystallinity and small crystal size compared with commercial hydroxyapatite (HA). The palatine process of maxilla density and porosity data reported, suggest that the palate bone is getting closer to the compact bone with a 52.78 ± 2.91% porosity and their mechanical properties depend on the preparation conditions and the area of the bone analyzed., Competing Interests: The authors declare no conflict of interest., (© 2022 The Author(s).)

A comparative study was conducted on the efficiency of mercury removal using bacterial nanocellulose (BNC) membranes obtained from the fermentation of the microorganism Komagataeibacter medellinensis , in contrast with its oxidized analog obtained by modifying the bacterial nanocellulose membranes via oxidation with 2,2,6,6-Tetramethylpiperidine-1-oxyl. Both types of membranes (modified and unmodified) were characterized to identify variations in the Physico-chemical parameters after modification. FTIR spectra confirmed the chemical modification of cellulose in all reaction conditions by the presence of a new characteristic band at ∼1730 cm -1 , corresponding to the new carboxylic groups produced by the oxidative process, and the decline of the band at ∼1,650 cm -1 , corresponding to the hydroxyl groups of the C6 carbon. While the XRD profiles indicated that the percentage of BNC crystallinity decreased and the SEM images showed that the nanoribbon network was interrupted as the amount of oxidizing agent increased. The kinetics of mercury removal from both types of membrane was evaluated by calculating the concentration of mercury at different times and establishing a mathematical model to describe the kinetics of this process. The modified membranes improved significantly the adsorption process of the metal ion and it was found that the modification that results in the greatest adsorption efficiency was BNC-m 7.5 with a value of 92.97%. The results obtained suggest that the modification of the bacterial nanocellulose membranes by oxidation transcendentally improves the mercury removal capacity, outlining the modified membranes as an excellent material for mercury removal in wastewater., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Suárez-Avendaño, Martínez-Correa, Cañas-Gutierrez, Castro-Riascos, Zuluaga-Gallego, Gañán-Rojo, Peresin, Pereira and Castro-Herazo.)