Search

Gold nanoparticles (Au NPs) have been extensively used as artificial enzymes, but their performance is still limited. We address this challenge by focusing on multimetallic nanorattles comprising an Au core inside a bimetallic AgAu shell, separated by a void (Au@AgAu NRs). They were prepared by a galvanic replacement approach and contained an ultrathin and porous shell comprising an AgAu alloy. By investigating the peroxide-like activity using TMB oxidation as a model transformation, we have found an increase of 152 fold in activities for the NRs relative to conventional Au NPs. Based on the kinetics results, the NRs also showed the lowest K-m, indicating better interaction with the substrate and faster product formation. We also observed a linear relationship between the concentration of the product and oxTMB as a function of H2O2 concentration, which could be further applied for H2O2 sensing applications (colorimetric detection). These data suggest that the NRs enable the combined effect of an increased surface area relative to solid counterparts, the possibility of exposing highly active surface sites, and the exploitation of nanoconfinement effects due to the void regions between the core and shell components. These results provide important insights into the optimization of peroxidase-like performances beyond what can be achieved in conventional NPs and may inspire the development of better-performing artificial enzymes.

Additive manufacturing (AM) has revolutionized and continues to revolutionize the manufacture of parts and components with complex geometries that are difficult to manufacture by traditional processes. There are many materials, including polymers, that can be used in this process. The improvement of mechanical, electrical, thermal, tribological, and magnetic properties can be achieved through the addition of filling materials to meet certain design and manufacturing requirements. This research studied the mechanical (tensile, flexural, and impact) and electrical properties of parts produced by 3D printing, through the fused deposition modeling (FDM) process, with acrylonitrile butadiene styrene (ABS) raw material reinforced with commercially supplied graphene, varying the infill and layer thickness parameters. These parts were then compared with parts produced through FDM and injection molding processes using ABS raw material without graphene reinforcement. A central composite design (CCD) was used in the experimental tests to ensure reliability of the results. The addition of graphene to ABS decreased the yield point for tensile strength by 51.5% and for flexural strength by 48.6%, both of which were statistically significant. In the impact energy test, the manufactured parts with the addition of graphene also decreased the impact energy by 36.8%; however, they were not statistically significant. The electrical properties (resistivity and conductivity) of the ABS-graphene were evaluated through the 4-point test and the results showed an average conductivity of 2.46 × 10− 1 (Ω.m)− 1, which classifies it as a semiconductor.

Plasmonic catalysis enables the use of light to accelerate molecular transformations. Its application to the control reaction selectivity is highly attractive but remains challenging. Here, we have found that the plasmonic properties in AgPd nanoparticles allowed different reaction pathways for tunable product formation under visible light irradiation. By employing the hydrogenation of phenylacetylene as a model transformation, we demonstrate that visible light irradiation can be employed to steer the reaction pathway from hydrogenation to homocoupling. Our data showed that the decrease in the concentration of H species at the surface due to plasmon-enhanced H2 desorption led to the control in selectivity. These results provide important insights into the understanding of reaction selectivity with light, paving the way for the application of plasmonic catalysis to the synthesis of 1,3-diynes, and bringing the vision of light-driven transformations with target selectivity one step closer to reality.

The investigation of antibodies raised against different SARS-CoV-2 antigens can help to determine the extent of previous SARS-CoV-2 infections in the population and track the humoral response to vaccination. Therefore, serological surveys can provide key information to better manage the pandemic and/or to implement the most effective vaccination program. Here we describe a time series anti-Nucleocapsid, anti-Spike IgG serological survey analysis in the city of Matinhos, PR, Brazil during the year of 2021. Seroconversion rates to the Nucleocapsid antigen was not influenced by gender or age. Comparison of the serological data with official COVID-19 cases in the city suggest that case sub notification is higher than 47%. Furthermore, by applying serological data, the corrected infection fatality rate was estimated to be lower than 2.4 % in contrast with the official estimative of 3.6 %. The rates of IgG reactive to Spike antigen resembled the curve of the fraction the population that had taken the second vaccine dose. Up to 82% of Spike seroconversion was detected in the end of 2021 confirming the effective of the COVID-19 vaccination program in the city. This SARS-CoV-2 serological study unraveled the SARS-CoV-2 infection rates and the response to vaccination in the city of Matinhos. It is likely that the numbers reported here may be similar in other cities in Brazil.

Anatomical and physiological specializations for plant adaptation to harsh climates result from molecular mechanisms that can be encoded in the nucleus or organelle. In this study, the complete plastomes of an arctic species

Resumo Fundamento Atualmente o sistema de saúde público brasileiro (SUS) não contempla a angiotomografia de coronárias. Objetivos Ranquear sob a perspectiva do SUS, a custo-efetividade de estratégias diagnósticas combinando teste ergométrico, cintilografia miocárdica, ecocardiograma por estresse e angiotomografia de coronárias para o diagnóstico de doença arterial coronariana em uma coorte hipotética de pacientes com probabilidade pré-teste intermediária. Métodos Análise de custo-efetividade por meio de árvore de decisão. Foram analisados a relação de custo-efetividade incremental e o benefício líquido em saúde das estratégias diagnósticas, com a adoção de múltiplos limiares de disposição a pagar entre 0,05 e 1 PIB per capita por diagnóstico correto. Nos casos de testes sequenciais, um segundo teste confirmatório era realizado quando o primeiro fosse positivo. Resultados Após exclusão das estratégias diagnósticas dominadas ou com dominância estendida, a fronteira de eficiência foi composta por três estratégias: teste ergométrico, teste ergométrico seguido de ecocardiograma de estresse, e ecocardiograma de estresse seguido de angiotomografia de coronárias, sendo esta última a estratégia mais custo-efetiva. Pelo critério do benefício líquido, o ranqueamento das estratégias mais custo-efetivas variou conforme a disposição a pagar. Conclusão Utilizando conceitos atuais de avaliação de tecnologias em saúde, este estudo fornece um ranqueamento para a tomada de decisão sobre qual estratégia diagnóstica utilizar, em uma população com risco pré-teste intermediário para DAC. Com estimativa factível de custos para a ATC, o impacto da inclusão desta ao rol do arsenal diagnóstico representaria uma estratégia custo-efetiva na maioria dos cenários avaliados nas variações de disposição a pagar. Abstract Background The Brazilian public health system does not include computed tomography angiography (CTA). Objective Rank, according to the Brazilian public health system, the cost-effectiveness of different strategies for the diagnosis of coronary artery disease (CAD), combining exercise tests (ET), myocardial scintigraphy (MS), stress echocardiography (SE), and CTA in a hypothetical intermediate pre-test probability cohort of patients. Methods This study implemented a cost-effectiveness analysis through a decision tree. The incremental cost-effectiveness ratio (ICER) and net benefit were analyzed by adopting multiple thresholds of willingness to pay, from 0.05 to 1 GDP per capita per correct diagnosis. In sequential tests, a second confirmatory test was performed only when the first was positive. Results After excluding dominated or extended dominance diagnostic strategies, the efficiency frontier consisted of three strategies: ET, ET followed by SE, and SE followed by CTA, the last being the most cost-effective strategy. Through the net benefit, the ranking of the most cost-effective strategies varied according to willingness to pay. Conclusions Using current concepts of health technology assessment, this study provides a ranking for decision-making concerning which diagnostic strategy to use in a population with an intermediate pre-test risk for CAD. With a feasible cost estimate adopted for CTA, the impact of including this to the list of the diagnostic arsenal would represent a cost-effective strategy in most of the evaluated scenarios with broad variations in the willingness to pay.

Single-particle reconstruction can be used to perform three-dimensional (3D) imaging of homogeneous populations of nano-sized objects, in particular viruses and proteins. Here, it is demonstrated that it can also be used to obtain 3D reconstructions of heterogeneous populations of inorganic nanoparticles. An automated acquisition scheme in a scanning transmission electron microscope is used to collect images of thousands of nanoparticles. Particle images are subsequently semi-automatically clustered in terms of their properties and separate 3D reconstructions are performed from selected particle image clusters. The result is a 3D dataset that is representative of the full population. The study demonstrates a methodology that allows 3D imaging and analysis of inorganic nanoparticles in a fully automated manner that is truly representative of large particle populations.

Metal coating films were deposited on the surface of the pieces of non-conducting polymers, acrylonitrile butadiene styrene (ABS), high impact polystyrene (HIPS) and poly (lactic acid) (PLA). These three polymers have been used since they are the main raw materials available for fusion and deposition molding equipment. In order to achieve surface metallization by electrodeposition, it was necessary to apply a pre-treatment using the chemical polymerization technique in solution with the electroconductive polymer polypyrrole (PPy) was deposited on the specimens. A uniform layer of PPy was deposited on the surface of the specimens of the ABS and HIPS polymers, while in the specimen of the polymer PLA this layer showed uniformity faults. After this pretreatment was possible to perform copper electrodeposition, creating the metallic coatings on the ABS / PPy, HIPS / PPy and PLA / PPy surfaces. This metallic coating was uniform in all specimens except the one of the PLA polymer that was not sanded. The adhesion of the coating was evaluated by the adhesion test with tape and the quality of the appearance (absence of visual defects), the morphology, the uniformity, the thickness, the conductivity and the adhesion quality of the films were analyzed.

The acoustic properties of ultrasound phantom materials have always been important, but with new applications interrogating tissue mechanical properties, viscoelasticity has also become an interesting feature to consider. Along with Young's modulus, the viscous component of tissue is affected by certain diseases and can therefore be used as a biomarker. Furthermore, viscoelasticity varies between tissue types and individuals, and therefore it would be useful with a phantom material that reflects this physiological range. Here we describe a gel for ultrasound imaging with a range of mechanical properties given by mixing different ratios of two oil-based gels, clear ballistic and styrene-ethylene/butylene-styrene (SEBS). The gels were mixed in five different proportions, ranging from 0-100% of either gel. For each of the gel compositions, we measured time of flight to determine speed of sound, narrowband ultrasound transmission for attenuation, stress-relaxation for viscoelasticity, mass and volume. Analysis of the stress-relaxation data using the generalized Maxwell model suggests that the material can be described by five parameters, E0, E1, E2, η1 and η2, and that each of these parameters decreases as more SEBS is incorporated into the mixed material. Instantaneous Young's modulus (the sum of E0, E1 and E2 in our model) ranges between 49 and 117 kPa for the different ratios, similar to values reported for cancerous tissue. Despite the large span of obtainable mechanical properties, speed of sound is relatively constant regardless of composition, with mean value estimates (± 95 % CI) between 1438 ± 9 and 1455 ± 3 m/s for pure and mixed gels. This was attributed to a variation in density and Poisson's ratio, following from the relation linking them to speed of sound and elasticity. Furthermore, both speed of sound and attenuation were within a suitable range for ultrasound phantoms. Combining this ballistic gel with SEBS copolymer in oil allows for control of mechanical properties, both elastic and viscous as evaluated by the material model. Furthermore, it does so without compromising ease of use, longevity and safety of the pre-made gel.

Metal nanoparticles have been widely exploited in catalysis, but their full impact on the environment and human health is still under debate. Here we describe the one-step fabrication of recoverable and reusable polymer microbead-supported metal and metal oxide nanocatalysts for application in batch reactions and flow systems. Au, Ag, and Fe3O4 nanoparticles were prepared directly at the surface of commercial benzylamine-coated spherical polymer beads in water by using low-energy microwave radiation for 5 min. The functionalization of microbead surface with betalamic acid, an antioxidant from plant origin, before irradiation changes the morphology and catalytic properties of the grafted nanoparticles. No leaching of the active phase was observed during the application of these effective and ready-to-use nanocatalysts on the reduction of 4-nitrophenol and oxidation of dihydrorhodamine 123. The supported nanocatalysts were recovered by filtration and/or magnetic separation and reused up to three times without significant drop in catalytic performance. These results can stimulate the controlled and facile synthesis of recoverable microbead-supported magnetic and nonmagnetic nanocatalysts that can be applied under myriad reaction conditions and reused multiple times.

Treatments of simulated effluent solutions containing the Reactive Black 5 (RB5) were carried out by electrochemical, photoelectrochemical, electro-Fenton and photoelectro-Fenton methods using a one-compartment cell with a boron-doped diamond anode and a 3% of manganese dioxide nanoflowers supported on a carbon Vulcan XC72 gas diffusion electrode cathode. In the photo-assisted processes, the solution was irradiated using a 40-W UVC lamp immersed in the treated solution. For Fenton-based processes, only 5 min was required to attain 95% (photoelectro-Fenton) and 93% (electro-Fenton) RB5 dye degradation. When conversion to CO2 is taken into account after 6-h treatment, electrochemical method mineralized ~ 13% of the organic load whereas removals greater than 90% were attained using the Fenton-based processes. These completely different results can be explained by the distinct spatial availability of the generated hydroxyl radical: only near the anode surface as in electrochemical-based processes or added to those distributed across the solution bulk as in Fenton-based processes.

Control over the bottom up synthesis of metal nanoparticles (NP) depends on many experimental factors, including the choice of stabilising and reducing agents. By selectively manipulating these species, it is possible to control NP characteristics through solution-phase synthesis strategies. It is not known, however, whether NPs produced from mechanochemical syntheses are governed by the same rules. Using the Au NPs mechanosynthesis as a model system, we investigate how a series of common reducing agents affect both the reduction kinetics and size of Au NPs. It is shown that the relative effects of reducing agents on mechanochemical NP synthesis differ significantly from their role in analogous solution-phase reactions. Hence, strategies developed for control over NP growth in solution are not directly transferrable to environmentally benign mechanochemical approaches. This work demonstrates a clear need for dedicated, systematic studies on NP mechanosynthesis.

Gold nanoparticles (NPs) combined with Lewis bases, such as piperazine, were found to perform selective hydrogenation reactions via the heterolytic cleavage of H2. Since gold nanoparticles can be prepared by many different methodologies and using different capping ligands, in this study, we investigated the influence of capping ligands adsorbed on gold surfaces on the formation of the gold–ligand interface. Citrate (Citr), poly(vinyl alcohol) (PVA), polyvinylpyrrolidone (PVP), and oleylamine (Oley)-stabilized Au NPs were not activated by piperazine for the hydrogenation of alkynes, but the catalytic activity was greatly enhanced after removing the capping ligands from the gold surface by calcination at 400 °C and the subsequent adsorption of piperazine. Therefore, the capping ligand can limit the catalytic activity if not carefully removed, demonstrating the need of a cleaner surface for a ligand–metal cooperative effect in the activation of H2 for selective semihydrogenation of various alkynes under mild reaction conditions.

Current time-resolvedin situapproaches limit the scope of mechanochemical investigations possible. Here we develop a new, general approach to simultaneously follow the evolution of bulk atomic and electronic structure during a mechanochemical synthesis. This is achieved by coupling two complementary synchrotron-based X-ray methods: X-ray absorption spectroscopy (XAS) and X-ray diffraction. We apply this method to investigate the bottom-up mechanosynthesis of technologically important Au micro and nanoparticles in the presence of three different reducing agents, hydroquinone, sodium citrate, and NaBH4. Moreover, we show how XAS offers new insight into the early stage generation of growth species (e.g.monomers and clusters), which lead to the subsequent formation of nanoparticles. These processes are beyond the detection capabilities of diffraction methods. This combined X-ray approach paves the way to new directions in mechanochemical research of advanced electronic materials.

Recently, the widespread use of antibiotics is becoming a serious worldwide public health challenge, which causes antimicrobial resistance and the occurrence of superbugs. In this context, MnO2 has been proposed as an alternative approach to achieve target antibacterial properties on Streptococcus mutans (S. mutans). This requires a further understanding on how to control and optimize antibacterial properties in these systems. We address this challenge by synthesizing δ-MnO2 nanoflowers doped by magnesium (Mg), sodium (Na), and potassium (K) ions, thus displaying different bandgaps, to evaluate the effect of doping on the bacterial viability of S. mutans. All these samples demonstrated antibacterial activity from the spontaneous generation of reactive oxygen species (ROS) without external illumination, where doped MnO2 can provide free electrons to induce the production of ROS, resulting in the antibacterial activity. Furthermore, it was observed that δ-MnO2 with narrower bandgap displayed a superior ability to inhibit bacteria. The enhancement is mainly attributed to the higher doping levels, which provided more free electrons to generate ROS for antibacterial effects. Moreover, we found that δ-MnO2 was attractive for in vivo applications, because it could nearly be degraded into Mn ions completely following the gradual addition of vitamin C. We believe that our results may provide meaningful insights for the design of inorganic antibacterial nanomaterials.

Herein, we describe the synthesis, characterization and electrochemical performance of four phosphonium-based ionic liquids (ILs) as electrolytes, Physicochemical properties such as viscosity, density, ionic conductivity, and thermal stability of ILs and conventional organic solvent ethylene carbonate (EC)/diethyl carbonate (DEC) were experimentally determined at different temperatures. All ILs showed thermal stability greater than 300 degrees C, surpassing the stability of the conventional organic solvent, whose flash points were 145 and 23 degrees C for EC and DEC, respectively. Nevertheless, at room temperature, all ILs are much more viscous than EC/DEC. The composite Si -[P-2224][FSI] (triethyl-n-butylphosphonium bis(fluoromethylsulfonyl)imide) and Si-EC/DEC anodes exhibit initial specific capacities at 0.15 A/g of 2409 and 2631 mAh/g, respectively. This demonstrates that despite the inferior transport properties of ILs, short alkyl-substituted phosphonium ILs like [P-2224][FSI] are potentially competitive for the new generation of electrolytes for LIBs. NMR, DSC, TGA, and galvanostatic discharged/charged were used as characterization techniques.

Colloidal particles with a spherical shape and diameters in the range of 0.01−1 μm have been a subject of extensive research, with applications in areas such as photonics, electronics, catalysis, drug delivery, and medicine. For most of these applications, it is of critical importance to achieve monodispersity for the size while expanding the diversity in terms of structure and composition. The uniformity in size allows one to establish rigorous correlations between this parameter and the physicochemical properties of the colloidal particles while ensuring experimental repeatability and measurement accuracy. On the other hand, the diversity in structure and composition offers additional handles for tailoring the properties. By switching from the conventional plain, solid structure to a core-shell, hollow, porous, or Janus structure, it offers immediate advantages and creates new opportunities, especially in the context of self-assembly, encapsulation, and controlled release. As for composition, monodispersed colloidal spheres were traditionally limited to amorphous materials such as polystyrene and silica. For metals and semiconducting materials, which are more valuable to applications in photonics, electronics, and catalysis, they tend to crystallize and thus grow anisotropically into non-spherical shapes, especially when their sizes pass 0.1 μm. Taken together, it is no wonder why chemical synthesis of monodispersed colloidal spheres has been a constant theme of research in areas such as colloidal science, materials chemistry, materials science, and soft matter. In this account, we summarize our efforts over the past two decades in developing solution-phase methods for the facile synthesis of colloidal spheres that are uniform in size, together with a broad range of compositions (including metals and semiconductors) and structures (e.g., solid, core-shell, hollow, porous, and Janus, among others). We start with the synthesis of monodispersed colloidal spheres made of semiconductors, metals with low melting points, and precious metals. Through chemical reactions, these colloidal spheres can be transformed into core-shell or hollow structures with new compositions and properties. Next, we discuss the synthesis of colloidal spheres with a Janus structure while taking a pseudo-spherical shape. Specifically, metal-polymer hybrid particles comprised of one metal nanoparticle partially embedded in the surface of a polymer sphere can be produced through precipitation polymerization in the presence of metal seed. With these Janus particles serving as templates, other types of Janus structures such as hollow spheres with a single hole in the surface can be obtained via site-selected deposition. Alternatively, such hollow spheres can be fabricated through a physical transformation process that involves swelling of polymer spheres, followed by freeze-drying. All these synthesis and transformation processes are solution-based, offering flexibility and potential for large-scale production. At the end, we highlight some of the applications enabled by these colloidal spheres, including fabrication of photonic devices, encapsulation, and controlled release for nanomedicine.

Helicobacter pylori (H. pylori) eradication using standard triple therapy (STT) with proton pump inhibitors (PPI), amoxicillin and clarithromycin (CLA) has been the standard in Latin America. However, CLA resistance is a rising problem affecting eradication rates. Genetic polymorphisms of CYP2C19, a PPI metabolizer may also affect eradication. The primary aims of this study were to evaluate the effect of clarithromycin resistance on H. pylori eradication in a population from Santiago, and to establish the pooled clarithromycin resistance in Santiago, Chile. Symptomatic adult patients attending a tertiary hospital in Santiago were recruited for this study. CLA resistance and the polymorphisms of CYP2C19 were determined on DNA extracted from gastric biopsies, using PCR. The STT was indicated for 14 days and eradication was determined by a urea breath test 4–6 weeks after therapy. A meta-analysis of CLA resistance studies among adult residents in Santiago was performed. Seventy-three out of 121 consecutive patients had positive rapid urease test (RUT) and received STT. Sixty-nine patients (95%) completed the study. The H. pylori eradication rate was 63% and the prevalence of CLA resistance was 26%. According to the CYP2C19 polymorphisms, 79.5% of the RUT-positive patients were extensive metabolizers. Multivariable analyses showed that only CLA resistance was significantly and inversely associated with failure of eradication (OR: 0.13; 95% confidence interval [95% CI], 0.04–0.49). A meta-analysis of two previous studies and our sample set (combined n = 194) yielded to a pooled prevalence of CLA resistance of 31.3% (95% CI 23.9–38.7). Our study shows that CLA resistance is associated with failure of H. pylori eradication. Given the high pooled prevalence of CLA resistance, consideration of CLA free therapies in Santiago is warranted. We could recommend bismuth quadruple therapy or high-dose dual therapy, according to bismuth availability. Further studies need to evaluate the best therapy.

Localized surface plasmons generated on metallic nanostructures can be used to accelerate molecular transformations; however, the efficiency is limited by the challenge to control the energy/charge transfer at the interfaces. Here, we combine density functional theory (DFT) calculations and experiments to reveal the mechanism of nitrophenol reduction on Au nanoparticles under visible-light irradiation and propose a strategy to further enhance the reaction rates. DFT calculations show a reduced activation barrier under electronic excitation on Au(111), thus explaining the measured higher rates under visible-light irradiation. Furthermore, we propose a heterostructure with Au nanoparticles covered by a thin film of hexagonal boron nitride; the latter is used to decouple the molecular orbitals from the metal to enable charge localization in the molecule. DFT calculations show that by this electronic decoupling, the activation barrier can be lowered by a factor of five. This work thus provides a valuable strategy for optimizing catalytic efficiency in plasmonic photocatalysis.

Listeriosis is a foodborne disease caused by the Gram-positive bacterium Listeria monocytogenes, a pathogen that modulates its intracellular survival via vacuolar escape and cytosolic replication. In the present study, we examined the ability of 58 L. monocytogenes isolates recovered in Brazil (beef, clinical and environmental samples, from 1978 to 2013) to invade, replicate and spread in a human intestinal epithelial cell line (Caco-2). Premature stop codons were common in the inlA gene of serotype 1/2c strains from beef and environment samples, associated with decreased Caco-2 cell invasion when compared to other serotypes. The isolates varied widely in their intracellular doubling times, and there was no clear relationship between serotypes and samples origin. Serotype 1/2a isolates were generally impaired in their ability to spread between Caco-2 cells, with an average 30 % smaller focus area than the 10403S reference strain. However, most isolates of serotype 1/2b exhibited enhanced cell-to-cell spread, with an average 35 % increase in focus area. Our findings are consistent with serotype being a better predictors of cell invasion potential and cell spread compared with sample origin of isolates, although the most invasive isolates were primarily isolated from beef. Additionally, we have identified isolates that could provide novel insight into the pathogenicity of L. monocytogenes that may not be revealed by studying common laboratory reference strains.

Made available in DSpace on 2022-04-28T19:45:51Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-11-15 The development of negative electrode materials with better performance than those currently used in Li-ion technology has been a major focus of recent battery research. Here, we report the synthesis and electrochemical evaluation of in situ-formed nitrogen-doped carbon/SiOC. The materials were synthesized by a sol–gel process using 3-(aminopropyl)triethoxysilane (APTES), sodium citrate and glycerol. The electrochemical performance of pyrolyzed materials was studied using poly(acrylic acid) binder and commercial organic electrolyte. Our reported approach enables changes in both the amount of nitrogen and the morphology as a function of the molar ratio of APTES:citrate and reaction time. Spherical-shaped NC/SiOC composite electrodes deliver a delithiation capacity of 622 mAh/g at 0.1 A/g and an initial coulombic efficiency of ∼63%, while in the large bulk material, respective values of 367 mAh/g and ∼55% were obtained. After 1000 charge/discharge cycles at 1.6 A/g, the latter material exhibits 98% of the initial capacity once it returned to lower current cycling. Overall, our results indicate that NC/SiOC materials are quite promising for electrochemical applications since both their large capacity and stability demonstrate superior performance compared to traditional graphite. Moreover, our synthesis is simple and, more importantly, environmentally friendly chemicals, such as sodium citrate and glycerol, are used. Departamento de Química Fundamental Instituto de Química – Universidade de São Paulo, Av. Prof. Lineu Prestes 748 Departamento de ciencias Universidad de Ingenieria y Tecnologia – UTEC Instituto de Química. UNESP, Rue Francisco Degni, 55 Department of Chemistry University of Helsinki, A.I. Virtasen Aukio 1 NanoQAM and Département de Chimie Université du Québec à Montréal, Case Postale, 8888 Succursale Centre-Ville Instituto de Química. UNESP, Rue Francisco Degni, 55

Resumo Fundamento A cardiopatia chagásica (CC) é uma condição de progressão lenta, cujo principal achado histopatológico é fibrose. Objetivos Avaliar se a fibrose cardíaca aumenta ao longo do tempo e se correlaciona com aumento no tamanho do ventrículo esquerdo (CE) e redução na fração de ejeção (FE) na CC crônica. Métodos Estudo retrospectivo que incluiu 20 indivíduos (50% homens; 60±10 anos) com CC crônica que se submeteram a dois exames de ressonância magnética cardíaca (RMC) com realce tardio com gadolínio em um intervalo mínimo de quatro anos entre os exames. Volume, FE e massa de fibrose do ventrículo esquerdo (VE) foram determinados por RMC. Associações da massa de fibrose na primeira RMC com alterações no volume do VE e FE ventricular esquerda na segunda RMC foram testadas por análise de regressão logística. Valores p cinco unidades absolutas na FE ventricular esquerda da primeira para a segunda RMC (OR 1,48; IC95% 1,03-2,13; p=0,03). A massa de fibrose do VE foi maior e aumentou entre os dois estudos de RMC no grupo de pacientes que apresentaram diminuição na FE entre os testes. Conclusões Mesmo pacientes em estágios iniciais da CC apresentam um aumento na fibrose do miocárdio ao longo do tempo, e a presença de fibrose do VE no basal está associada a uma diminuição da função sistólica do VE. Abstract Background Chagas heart disease (CHD) is a slow progressing condition with fibrosis as the main histopathological finding. Objectives To study if cardiac fibrosis increases over time and correlates with increase in left ventricular (LV) size and reduction of ejection fraction (EF) in chronic CHD. Methods Retrospective study that included 20 individuals (50% men; 60±10 years) with chronic CHD who underwent two cardiac magnetic resonance imaging (MRI) with late gadolinium enhancement with a minimum interval of four years between tests. LV volume, EF, and fibrosis mass were determined by cardiac MRI. Associations of fibrosis mass at the first cardiac MRI and changes in LV volume and EF at the second cardiac MRI were tested using logistic regression analysis. P values 5 absolute units in LV EF from the first to the second MRI (OR 1.48, 95% CI 1.03-2.13, p=0.03). LV fibrosis mass was larger and increased between MRI studies in the group that presented decrease in LV EF between the tests. Conclusions Even patients at an initial stage of CHD show an increase in myocardial fibrosis over time, and the presence of LV fibrosis at baseline is associated with a decrease in LV systolic function.

Recently, the widespread use of antibiotics is becoming a serious worldwide public health challenge, which causes antimicrobial resistance and the occurrence of superbugs. In this context, MnO2 has been proposed as an alternative approach to achieve target antibacterial properties on Streptococcus mutans (S. mutans). This requires a further understanding on how to control and optimize antibacterial properties in these systems. We address this challenge by synthesizing δ-MnO2 nanoflowers doped by magnesium (Mg), sodium (Na), and potassium (K) ions, thus displaying different bandgaps, to evaluate the effect of doping on the bacterial viability of S. mutans. All these samples demonstrated antibacterial activity from the spontaneous generation of reactive oxygen species (ROS) without external illumination, where doped MnO2 can provide free electrons to induce the production of ROS, resulting in the antibacterial activity. Furthermore, it was observed that δ-MnO2 with narrower bandgap displayed a superior ability to inhibit bacteria. The enhancement is mainly attributed to the higher doping levels, which provided more free electrons to generate ROS for antibacterial effects. Moreover, we found that δ-MnO2 was attractive for in vivo applications, because it could nearly be degraded into Mn ions completely following the gradual addition of vitamin C. We believe that our results may provide meaningful insights for the design of inorganic antibacterial nanomaterials.