Search

This paper presents developments in stationary phase coatings for microelectromechanical system gas chromatography (MEMS GC). Specifically, we present the coating of MEMS GC separation columns with a chiral stationary phase for the separation of amino acid enantiomers. Three commercial columns coated with chiral stationary phases from Restek were tested: Rt-βDEXm, Rt-βDEXsm, and Rt-βDEXsa. Four amino acid enantiomers (d- and l-) were tested with the 3 commercial columns: alanine (Ala), valine (Val), leucine (Leu), and aspartic acid (Asp). The Rt-βDEXsm column provided the best experimental performance with separation of d- and l-Ala and partial separation of d- and l-Asp. The resolution, Rs, values were 4.65 for the Ala enantiomers and 0.98 for the Asp enantiomers, respectively. The Rt-βDEXsm chiral stationary phase was dynamically coated on three 10-m-long microcolumns connected in series to investigate amino acid enantiomer separation. Successful separation of d- and l-Ala and partial separation of d- and l-Asp were observed with the microcolumns. The Rs values from the chiral-stationary-phase-coated microcolumns were 1.21 and 0.553 for the Ala and Asp enantiomers, respectively. The chromatographically separated amino acid enantiomers were detected by the MAss Spectrometer for Planetary EXploration (MASPEX), a spaceflight mass spectrometer. Future work is required for improving the MEMS GC separation column performance consisting of testing static versus dynamic coating methods and more rigorous investigation of the stationary phase coating thickness. A discussion is provided on future work for the development of an MEMS GC suite targeting broad analyte selectivity for future space science missions.

The energy loss of ions in plasma is a challenging issue in inertial confinement fusion and many theoretical models exist on ion-stopping power. Here, the authors use laser-generated plasma probed by accelerator-produced ions in experiments to discriminate various ion stopping models near the Bragg peak.

Objective: Biomechanical modeling of infrarenal aortic aneurysms seeks to predict ruptures in advance, thereby reducing aneurysm-related deaths. As individual methods focusing on strain and stress analysis lack adequate discretization power, this study aims to explore multifactorial characterization for progressive aneurysmal degeneration. The study's objective is to compare stress- and strain-related parameters in infrarenal aortic aneurysms., Methods: Twenty-two patients with abdominal aortic aneurysms (AAAs) (mean maximum diameter, 53.2 ± 7.2 mm) were included in the exploratory study, examined by computed tomography angiography (CTA) and three-dimensional real-time speckle tracking ultrasound (4D-US). The conformity of aneurysm anatomy in 4D-US and CTA was determined with the mean point-to-point distance (MPPD). CTA was employed for each AAA to characterize stress-related indices using the semi-automated A4-clinics RE software. Five segmentations from one 4D-US examination were fused into one averaged model for strain analysis using MATLAB and the Abaqus solver., Results: The mean MPPD between the adjacent points of the 4D-US and CTA-derived geometry was 1.8 ± 0.4 mm. The interclass correlation coefficients for all raters and all measurements for the maximum AAA diameter in 2D, 4D ultrasound, and CTA indicate moderate to good reliability (interclass correlation coefficient 1 0.69 with 95% confidence interval [CI], 0.49-0.84; P  < .001). The peak wall stress (PWS) correlates fairly with the maximum AAA diameter in 2D-US (r = 0.54; P  < .01) and 4D-US (r = 0.53; P  < .05) and moderately strongly with the maximum exterior AAA diameter (r = 0.63; P  < .01). The peak wall rupture risk index shows a strong correlation with the PWS (ρ > 0.9; P  < .001) and is influenced by anatomical parameters with equal strength. Isolated observation of the intraluminal thrombus does not provide significant information in the determination of PWS. The maximum AAA diameter in 2D-US shows a fair negative correlation with the mean circumferential, longitudinal and in-plane shear strain (ρ = -0.46; r = -0.45; ρ = -0.47; P  < .05 for all). The circumferential strain ratio as an indicator of wall motion heterogeneity increases with the aneurysm diameter (r = 0.47; P  < .05). The direct comparison of wall strain and wall stress indices shows no quantitative correlation., Conclusions: The strain and stress analyses provide independent biomechanical information of AAAs. At the current stage of development, the two methods are considered complementary and may optimize a more patient-specific rupture risk prediction in the future., Competing Interests: None., (© 2024 by the Society for Vascular Surgery. Published by Elsevier Inc.)

Abdominal aortic aneurysms are a degenerative disease of the aorta associated with high mortality. To date, in vivo information to characterize the individual elastic properties of the aneurysm wall in terms of rupture risk is lacking. We have used time-resolved 3D ultrasound strain imaging to calculate spatially resolved in-plane strain distributions characterized by mean and local maximum strains, as well as indices of local variations in strains. Likewise, we here present a method to generate averaged models from multiple segmentations. Strains were then calculated for single segmentations and averaged models. After registration with aneurysm geometries based on CT-A imaging, local strains were divided into two groups with and without calcifications and compared. Geometry comparison from both imaging modalities showed good agreement with a root mean squared error of 1.22 ± 0.15 mm and Hausdorff Distance of 5.45 ± 1.56 mm (mean ± sd, respectively). Using averaged models, circumferential strains in areas with calcifications were 23.2 ± 11.7% (mean ± sd) smaller and significantly distinguishable at the 5% level from areas without calcifications. For single segmentations, this was possible only in 50% of cases. The areas without calcifications showed greater heterogeneity, larger maximum strains, and smaller strain ratios when computed by use of the averaged models. Using these averaged models, reliable conclusions can be made about the local elastic properties of individual aneurysm (and long-term observations of their change), rather than just group comparisons. This is an important prerequisite for clinical application and provides qualitatively new information about the change of an abdominal aortic aneurysm in the course of disease progression compared to the diameter criterion., (© 2023. The Author(s).)

Abdominal aortic aneurysm disease is the local enlargement of the aorta, typically in the infrarenal section, causing up to 200,000 deaths/year. In vivo information to characterize the individual elastic properties of the aneurysm wall in terms of rupture risk is lacking. We used a method that combines 4D ultrasound and direct deformation estimation to compute in vivo 3D Green-Lagrange strain in murine angiotensin II-induced dissecting aortic aneurysms, a commonly used mouse model. After euthanasia, histological staining of cross-sectional sections along the aorta was performed in areas where in vivo strains had previously been measured. The histological sections were segmented into intact and fragmented elastin, thrombus with and without red blood cells, and outer vessel wall including the adventitia. Meshes were then created from the individual contours based on the histological segmentations. The isolated contours of the outer wall and lumen from both imaging modalities were registered individually using a coherent point drift algorithm. 2D finite element models were generated from the meshes, and the displacements from the registration were used as displacement boundaries of the lumen and wall contours. Based on the resulting deformed contours, the strains recorded were grouped according to segmented tissue regions. Strains were highest in areas containing intact elastin without thrombus attachment. Strains in areas with intact elastin and thrombus attachment, as well as areas with disrupted elastin, were significantly lower. Strains in thrombus regions with red blood cells were significantly higher compared to thrombus regions without. We then compared this analysis to statistical distribution indices and found that the results of each aligned, elucidating the relationship between vessel strain and structural changes. This work demonstrates the possibility of advancing in vivo assessments to a microstructural level ultimately improving patient outcomes., (© 2023. The Author(s).)

As radiotherapy is an important part of the treatment in a variety of pediatric tumors of the central nervous system (CNS), proton beam therapy (PBT) plays an evolving role due to its potential benefits attributable to the unique dose distribution, with the possibility to deliver high doses to the target volume while sparing surrounding tissue. Children receiving PBT for an intracranial tumor between August 2013 and October 2017 were enrolled in the prospective registry study KiProReg. Patient's clinical data including treatment, outcome, and follow-up were analyzed using descriptive statistics, Kaplan-Meier, and Cox regression analysis. Adverse events were scored according to the Common Terminology Criteria for Adverse Events (CTCAE) 4.0 before, during, and after PBT. Written reports of follow-up imaging were screened for newly emerged evidence of imaging changes, according to a list of predefined keywords for the first 14 months after PBT. Two hundred and ninety-four patients were enrolled in this study. The 3-year overall survival of the whole cohort was 82.7%, 3-year progression-free survival was 67.3%, and 3-year local control was 79.5%. Seventeen patients developed grade 3 adverse events of the CNS during long-term follow-up (new adverse event n = 7; deterioration n = 10). Two patients developed vision loss (CTCAE 4°). This analysis demonstrates good general outcomes after PBT.

Background: Radiotherapy (RT) of ependymoma in children is an important part of the interdisciplinary treatment concept. However, feasibility and dose concepts are still under investigation, particularly in very young children. The aim of this study was to evaluate the standard dose and volume of proton therapy (PT) in children with ependymoma., Methods: In this analysis, 105 patients with localized, intracranial ependymoma under the age of 18 years treated with PT between 2013 and 2018 were included. Patient characteristics, treatment, outcome, and follow-up data were analyzed using descriptive statistics, Kaplan-Meier, and Cox regression analysis., Results: The median age of patients at PT was 2.8 years (0.9-17.0 years). The molecular subgroup analysis was performed in a subset of 50 patients (37 EP-PFA, 2 EP-PFB, 7 EP-RELA, 2 EP-YAP, 2 NEC [not elsewhere classified]). The median total dose was 59.4 Gy (54.0-62.0 Gy). The median follow-up time was 1.9 years. The estimated 3-year overall survival (OS), local control (LC), and progression-free survival (PFS) rates were 93.7%, 74.1%, and 55.6%, respectively. Within univariable analysis, female gender and lower dose had a positive impact on OS, whereas age ≥4 years had a negative impact on OS and PT given after progression had a negative impact on PFS. In the multivariable analysis, multiple tumor surgeries were associated with lower PFS. New ≥3° late toxicities occurred in 11 patients., Conclusion: For children with localized ependymoma, PT was effective and well tolerable. Multiple surgeries showed a negative impact on PFS., (© The Author(s) 2021. Published by Oxford University Press on behalf of the Society for Neuro-Oncology.)

Objectives: The four-dimensional ultrasound (4D-US) enables imaging of the aortic segment and simultaneous determination of the wall expansion. The method shows a high spatial and temporal resolution, but its in vivo reliability is so far unknown for low-measure values. The present study determines the intraobserver repeatability and interobserver reproducibility of 4D-US in the atherosclerotic and non-atherosclerotic infrarenal aorta., Methods: In all, 22 patients with non-aneurysmal aorta were examined by an experienced examiner and a medical student. After registration of 4D images, both the examiners marked the aortic wall manually before the commercially implemented speckle tracking algorithm was applied. The cyclic changes of the aortic diameter and circumferential strain were determined with the help of custom-made software. The reliability of 4D-US was tested by the intraclass correlation coefficient (ICC)., Results: The 4D-US measurements showed very good reliability for the maximum aortic diameter and the circumferential strain for all patients and for the non-atherosclerotic aortae (ICC >0.7), but low reliability for circumferential strain in calcified aortae (ICC = 0.29). The observer- and masking-related variances for both maximum diameter and circumferential strain were close to zero., Conclusions: Despite the low-measured values, the high spatial and temporal resolution of the 4D-US enables a reliable evaluation of cyclic diameter changes and circumferential strain in non-aneurysmal aortae independent from the observer experience but with some limitations for calcified aortae. The 4D-US opens up a new perspective with regard to noninvasive, in vivo assessment of kinematic properties of the vessel wall in the abdominal aorta., (© 2021 The Authors. Journal of Ultrasound in Medicine published by Wiley Periodicals LLC on behalf of American Institute of Ultrasound in Medicine.)

Osteoporotic vertebral fractures often necessitate fusion surgery, with high rates of implant failure. We present a novel bioactive composite of calcium phosphate cement (CPC) and the collagen I mimetic P-15 for pedicle screw augmentation in osteoporotic bone. Methods involved expression analysis of osteogenesis-related genes during osteoblastic differentiation by RT-PCR and immunostaining of osteopontin and Ca 2+ deposits. Untreated and decalcified sheep vertebrae were utilized for linear pullout testing of pedicle screws. Bone mineral density (BMD) was measured using dual-energy X-ray absorptiometry (DEXA). Expression of ALPI II ( p < 0.0001), osteopontin ( p < 0.0001), RUNX2 ( p < 0.0001), and osteocalcin ( p < 0.0001) was upregulated after co-culture of MSC with CPC-P-15. BMD was decreased by 28.75% ± 2.6%. Pullout loads in untreated vertebrae were 1405 ± 6 N ( p < 0.001) without augmentation, 2010 ± 168 N ( p < 0.0001) after augmentation with CPC-P-15, and 2112 ± 98 N ( p < 0.0001) with PMMA. In decalcified vertebrae, pullout loads were 828 ± 66 N ( p < 0.0001) without augmentation, 1324 ± 712 N ( p = 0.04) with PMMA, and 1252 ± 131 N ( p < 0.0078) with CPC-P-15. CPC-P-15 induces osteoblastic differentiation of human MES and improves pullout resistance of pedicle screws in osteoporotic and non-osteoporotic bone.

Objective: Radiotherapy (RT) is an integral part of the interdisciplinary treatment of patients with high-risk neuroblastoma (NB). With the continuous improvements of outcome, the interest in local treatment strategies that reduce treatment-related side effects while achieving optimal oncological results is growing. Proton beam therapy (PBT) represents a promising alternative to conventional photon irradiation with regard to the reduction of treatment burden., Method: Retrospective analysis of children with high or intermediate risk NB receiving PBT of the primary tumor site during first-line therapy between 2015 and 2020 was performed. Data from the prospective in-house registry Standard Protonentherapie WPE - Kinder- (KiProReg) with respect to tumor control and treatment toxicity were analyzed. Adverse events were classified according to CTCAE Version 4 (V4.0) before, during, and after PBT., Results: In total, 44 patients (24 male, 20 female) with high (n = 39) or intermediate risk NB (n = 5) were included in the analysis. Median age was 3.4 years (range, 1.4-9.9 years). PBT doses ranged from 21.0 to 39.6 Gray (Gy) (median 36.0 Gy). Five patients received PBT to the MIBG-avid residual at the primary tumor site at time of PBT according to the NB-2004 protocol. In 39 patients radiation was given to the pre-operative tumor bed with or without an additional boost in case of residual tumor. After a median follow-up (FU) of 27.6 months, eight patients developed progression, either local recurrence (n = 1) or distant metastases (n = 7). Four patients died due to tumor progression. At three years, the estimated local control, distant metastatic free survival, progression free survival, and overall survival was 97.7, 84.1, 81.8, and 90.9%, respectively. During radiation, seven patients experienced higher-grade (CTCAE ≥ °3) hematologic toxicity. No other higher grade acute toxicity occurred. After PBT, one patient developed transient myelitis while receiving immunotherapy. No higher grade long-term toxicity was observed up to date., Conclusion: PBT was a well tolerated and effective local treatment in children with high and intermediate risk NB. The role of RT in an intensive multidisciplinary treatment regimen remains to be studied in the future in order to better define timing, doses, target volumes, and general need for RT in a particularly sensitive cohort of patients., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Jazmati, Butzer, Hero, Ahmad Khalil, Merta, Bäumer, Plum, Fuchs, Koerber, Steinmeier, Peters, Doyen, Thole, Schmidt, Blase, Tippelt, Eggert, Schwarz, Simon and Timmermann.)

Objective: The rupture of abdominal aortic aneurysms (AAAs) is associated with high mortality despite surgical developments. The determination of aneurysm diameter allows for follow up of aneurysm growth but fails in precisely predicting aneurysm rupture. In this study, time resolved three dimensional ultrasound (4D ultrasound) based wall motion indices (WMIs) are investigated to see if they are capable of distinguishing between uneven affected regions of the aneurysm wall., Methods: In a prospective study, 56 patients with an AAA were examined using 4D ultrasound. Local longitudinal, circumferential, and shear strains were computed using custom methods. The deformation of the neck and sac of each aneurysm was characterised by statistical indices of the obtained distributions of local wall strains (WMIs): mean and peak strain, heterogeneity index, and local strain ratio. The locations of regions with highest local peak strain were determined., Results: Compared with the aneurysm neck, the sac is characterised by low mean strain, but highly heterogeneous deformation, described by high local strain ratio and heterogeneity index. Differences were highly significant (p < .001) for all strain components. The regions with the highest circumferential peak strain were found more often in the posterior part of the aneurysm neck (p < .050) and sac (p < .001) regions, compared with other wall regions. No statistically significant correlation was found between the WMIs and maximum AAA diameter, except for longitudinal mean strain, which decreased with the increasing diameter (rho = -.42, p < .010)., Conclusion: Characterisation of wall kinematics by 4D ultrasound based WMIs provides a new and independent criterion for the distinction of diseased tissue in the AAA sac and the less affected neck region. This is a promising step towards the establishment of new biomarkers to differentiate between the mechanical instability of the AAA and rupture risk., (Copyright © 2020 European Society for Vascular Surgery. Published by Elsevier B.V. All rights reserved.)

The aim of this study was to measure, characterize, and compare the time-resolved three-dimensional wall kinematics of the ascending and the abdominal aorta. Comprehensive description of aortic wall kinematics is an important issue for understanding its physiological functioning and early detection of adverse changes. Data on the three-dimensional, dynamic cyclic deformation of the aorta in vivo are scarce. Either most imaging techniques available are too slow to capture aortic wall motion (CT, MRI) or they do not provide three-dimensional geometry data. Three-dimensional volume data sets of ascending and abdominal aortae of male healthy subjects (25.5 [24.5, 27.5] years) were acquired by use of a commercial echocardiography system with a temporal resolution of 11-25 Hz. Longitudinal and circumferential strain, twist, and relative volume change were determined by use of a commercial speckle tracking algorithm and in-house software. The kinematics of the abdominal aorta is characterized by diameter change, almost constant length and unidirectional, either clockwise or counter clockwise twist. In contrast, the ascending aorta undergoes a complex deformation with alternating clockwise and counterclockwise twist. Length and diameter changes were in the same order of magnitude with a phase shift between both. Longitudinal strain and its phase shift to circumferential strain contribute to the proximal aorta's Windkessel function. Complex cyclic deformations are known to be highly fatiguing. This may account for increased degradation of components of the aortic wall and therefore promote aortic dissection or aneurysm formation.

Computational analysis of the biomechanics of the vascular system aims at a better understanding of its physiology and pathophysiology and eventually at diagnostic clinical use. Because of great inter-individual variations, such computational models have to be patient-specific with regard to geometry, material properties and applied loads and boundary conditions. Full-field measurements of heterogeneous displacement or strain fields can be used to improve the reliability of parameter identification based on a reduced number of observed load cases as is usually given in an in vivo setting. Time resolved 3D ultrasound combined with speckle tracking (4D US) is an imaging technique that provides full field information of heterogeneous aortic wall strain distributions in vivo. In a numerical verification experiment, we have shown the feasibility of identifying nonlinear and orthotropic constitutive behaviour based on the observation of just two load cases, even though the load free geometry is unknown, if heterogeneous strain fields are available. Only clinically available 4D US measurements of wall motion and diastolic and systolic blood pressure are required as input for the inverse FE updating approach. Application of the developed inverse approach to 4D US data sets of three aortic wall segments from volunteers of different age and pathology resulted in the reproducible identification of three distinct and (patho-) physiologically reasonable constitutive behaviours. The use of patient-individual material properties in biomechanical modelling of AAAs is a step towards more personalized rupture risk assessment., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Objective/background: Ultrasound measurement of aortic diameter for aneurysm screening allows supervision of aneurysm growth. Additional biomechanical analysis of wall motion and aneurysm deformation can supply information about individual elastic properties and the pathological state of the aortic wall. Local aortic wall motion was analyzed through imaged aortic segments according to age and pathology., Methods: Sixty-five patients were examined with a commercial four dimensional ultrasound system (4D-US). Three groups were defined: patients with normal aortic diameter and younger than 60 years of age (n = 21); those with normal aortic diameter and older than 60 years of age (n = 25); and those with infrarenal aortic aneurysm (n = 19). A diastolic reference shape of aortic wall segments was obtained and local and temporally resolved wall strain was determined. Indices characterizing the resulting wall strain distribution were determined., Results: The analysis of biomechanical properties displayed increasing heterogeneous and dyssynchronous circumferential strain with increasing patient age. Young patients exhibited higher mean strain amplitude. The distribution of the spatial heterogeneity index and local strain ratio was inversely proportional to age. The maximum local strain amplitude was significantly higher in the young (0.26 ± 0.17) compared with the old (0.16 ± 0.07) or aneurysmal aorta (0.16 ± 0.10). Temporal dyssynchrony significantly differed between young (0.13 ± 0.10) and old (aneurysmal 0.31 ± 0.04, non-aneurysmal 0.29 ± 0.05), regardless of aortic diameter. The spatial heterogeneity index and local strain ratio differentiate non-aneurysmal and aneurysmal aorta, regardless of age., Conclusions: 4D-US strain imaging enables description of individual wall motion (kinematics) of the infrarenal aorta with high spatial and temporal resolution. Functional differences between young, old, and aneurysmal aorta can be described by mean (circumferential) strain amplitude, the spatial heterogeneity index, and the local strain ratio. Further investigation is required to refine this new perspective of patient individualized characterization of the pathological AAA wall and eventually to rupture risk stratification., (Copyright © 2015 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.)

Computational analysis of the biomechanics of the vascular system aims at a better understanding of its physiology and pathophysiology. To be of clinical use, however, these models and thus their predictions, have to be patient specific regarding geometry, boundary conditions and material. In this paper we present an approach to determine individual material properties of human aortae based on a new type of in vivo full field displacement data acquired by dimensional time resolved three dimensional ultrasound (4D-US) imaging. We developed a nested iterative Finite Element Updating method to solve two coupled inverse problems: The prestrains that are present in the imaged diastolic configuration of the aortic wall are determined. The solution of this problem is integrated in an iterative method to identify the nonlinear hyperelastic anisotropic material response of the aorta to physiologic deformation states. The method was applied to 4D-US data sets of the abdominal aorta of five healthy volunteers and verified by a numerical experiment. This non-invasive in vivo technique can be regarded as a first step to determine patient individual material properties of the human aorta., (© 2013 Elsevier Ltd. All rights reserved.)

Background: Aortic wall strains are indicators of biomechanical changes of the aorta due to aging or progressing pathologies such as aortic aneurysm. We investigated the potential of time-resolved three-dimensional ultrasonography coupled with speckle-tracking algorithms and finite element analysis as a novel method for noninvasive in vivo assessment of aortic wall strain., Methods: Three-dimensional volume datasets of 6 subjects without cardiovascular risk factors and 2 abdominal aortic aneurysms were acquired with a commercial real time three-dimensional echocardiography system. Longitudinal and circumferential strains were computed offline with high spatial resolution using a customized commercial speckle-tracking software and finite element analysis. Indices for spatial heterogeneity and systolic dyssynchrony were determined for healthy abdominal aortas and abdominal aneurysms., Results: All examined aortic wall segments exhibited considerable heterogenous in-plane strain distributions. Higher spatial resolution of strain imaging resulted in the detection of significantly higher local peak strains (p ≤ 0.01). In comparison with healthy abdominal aortas, aneurysms showed reduced mean strains and increased spatial heterogeneity and more pronounced temporal dyssynchrony as well as delayed systole., Conclusions: Three-dimensional ultrasound speckle tracking enables the analysis of spatially highly resolved strain fields of the aortic wall and offers the potential to detect local aortic wall motion deformations and abnormalities. These data allow the definition of new indices by which the different biomechanical properties of healthy aortas and aortic aneurysms can be characterized., (Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.)

G3S1 cells are a new line derived from EM-G3 breast cancer cells by chronic nutritional stress and treatments with 12-O-tetradecanoylphorbol-13-acetate. These cells are capable of growing in standard medium. G3S1 cells exhibited elevated invasiveness in Matrigel invasion chambers as compared with parental EM-G3 cells. Elevated invasiveness of G3S1 cells was accompanied by higher incidence of myzitiras morphotype (sucker-like) and newly observed vthela morphotype (leech-like) both inducible in Hanks' Balanced Salt Solution test. Time-lapse phase contrast microscopy showed a capacity of G3S1 cells to form lobopodial protrusions already 20 min after seeding on gelatin. These protrusions could make contact with the dish and possibly produce the vthela shape. The possible relationship of mysitiras and vthela morphotypes to an increase in malignant potential marked by enhanced invasiveness was thus indicated., (Copyright 2009 Wiley Periodicals, Inc.)