Search

Genetic diversity within species of Tripsacum was surveyed based on randomly amplified polymorphic DNA (RAPD) variation, as detected with the polymerase chain reaction (PCR). Thirteen of the 16 Tripsacum species, including both temperate and tropical species, were included in this study using 56 decamer oligonucleotide primers. All of the 56 primers generated repeatable RAPD profiles and 53 of them detected polymorphic bands among the Tripsacum species. These 53 primers generated 350 repeatable bands ranging in size from 150–1600 bp, each primer generating an average of seven scoreable bands. Cluster analysis of polymorphic RAPDs indicated four major clusters. Cluster 1 consists of North American Tripsacum species, cluster 2 consists of South American Tripsacum species, cluster 3 includes T. zopilotense and T. latifolium from Mexico, and cluster 4 consists of Mesoamerican Tripsacum species. Cluster analysis does not reveal the division of two taxonomic sections (Fasciculata and Tripsacum). Copyright 1999 Annals of Botany Company [ABSTRACT FROM AUTHOR]

Introduction: Sacroiliac joint (SIJ) fusion is a surgical treatment option for SIJ pathology in select patients who have failed conservative management. More recently, minimally invasive surgical (MIS) techniques have been developed. This study aimed to determine the trends in procedure volume and reimbursement rates for SIJ fusion., Methods: Publicly available Medicare databases were assessed using the National Summary Data Files for 2010 to 2020. Files were organized according to current procedural terminology (CPT) codes. CPT codes specific to open and MIS SI joint fusion (27279 and 27280) were identified and tracked. To track surgeon reimbursements, the CMS Medicare Physician Fee Schedule Look-Up Tool was used to extract facility prices. Descriptive statistics and linear regression were used to evaluate trends in procedure volume, utilization, and reimbursement rates. Compound annual growth rates were calculated, and discrepancies in inflation were corrected for using the Consumer Price Index., Results: A total of 33,963 SIJ fusions were conducted in the Medicare population between 2010 and 2020, with an overall increase in procedure volume of 2,350.9% from 318 cases in 2010 to 7,794 in 2020. Since the introduction of the 27279 CPT code in 2015, 8,806 cases (31.5%) have been open and 19,120 (68.5%) have been MIS. Surgeon reimbursement for open fusions increased nominally by 42.8% (inflation-adjusted increase of 20%) from $998 in 2010 to $1,425 in 2020. Meanwhile, reimbursement for MIS fusion experienced a nominal increase of 58.4% (inflation-adjusted increase of 44.9%) from $582 in 2015 to $922 in 2020., Conclusion: SIJ fusion volume in the Medicare population has increased substantially in the past 10 years, with MIS SIJ fusion accounting for most of the procedures since the introduction of the 27279 CPT code in 2015. Reimbursement rates for surgeons have also increased for both open and MIS procedures, even after adjusting for inflation., (Copyright © 2023 by the American Academy of Orthopaedic Surgeons.)

Clinical/methodical Issue: In the new edition of the German S3-guideline published in June 2021, the diagnosis and treatment of cholangiocarcinoma (CCA) and gallbladder carcinoma are addressed for the first time. This article discusses the local and locoregional treatment options for intrahepatic CCA (iCCA)., Standard Radiological Methods: Mortality is high in iCCA and the incidence is rising. In unresectable patients, treatment options include local and locoregional approaches., Methodical Innovations: Besides recommendations regarding surgery, biliary drainage, intraductal locoregional therapy and radiation therapy, two recommendations regarding interventional radiologic therapies are included in the updated S3-guideline. Percutaneous thermal ablation via radiofrequency or microwave ablation (RFA/MWA) is suggested for unresectable tumors with up to 3 cm in diameter as primary therapy and for recurrent tumors. In advanced, liver dominant iCCA, intra-arterial therapies such as transarterial radioembolization (TARE), transarterial chemoembolization (TACE) or hepatic arterial infusion (HAI) are recommended as single therapy or in combination with other therapies., Achievements: Due to a lack of randomized controlled studies, the efficacy of locoregional therapies in iCCA is challenging to assess; however, various cohort studies, meta-analyses and review articles confirm their efficiency., Practical Recommendations: Interventional radiological therapies alone or in combination with systemic therapies have the potential to improve the prognosis of patients with iCCA. Due to the various therapeutic options, patients with iCCA should be treated in centers which cover the entire therapeutic spectrum., (© 2021. The Author(s), under exclusive licence to Springer Medizin Verlag GmbH, ein Teil von Springer Nature.)

Background: Patients with substantially impaired kidney function and peripheral arterial disease (PAD) underwent comparative CO 2 -based depiction of the pelvic arteries (PAs)., Purpose: To evaluate the feasibility and diagnostic performance of CO 2 -based C-arm computed tomography (CACT) and compare its depiction of PAs with CO 2 -digital subtraction angiography (DSA)., Material and Methods: Fifteen patients (10 men, mean age 70 ± 11 years) with PAD received CO 2 -DSA and CO 2 -CACT of the PAs, depicted from the aorta to femoral arteries. These were divided into nine segments (135 in total) and graded by two independent readers for image quality (IQ; 1 = sufficient, 2 = minimal impairments, 3 = insufficient, 4 = outside field of view) and subsequent stenosis grading (SG; grade 1: normal to grade 4: occlusion), under exclusion of all segments with insufficient IQ. Inter-observer and inter-modality agreement calculation and subsequent consensus reading were performed and correlated to a standard of reference (StOR), representing a modality consensus., Results: Of 135 segments, 117 showed sufficient IQ, excluding 18 segments (10 CACT, 8 DSA). Inter-observer agreement for IQ and consecutive SG demonstrated good to excellent agreement: IQ DSA : κ = 0.83, IQ CACT : κ = 0.76; Stenosis DSA : κ = 0.71, Stenosis CACT : κ = 0.84. Inter-modality agreement for SG lay at κ = 0.76 and κ = 0.65, respectively. More stenoses could be detected by CACT, and analysis of pooled consensus values of SG in CACT cons versus StOR showed an excellent agreement (κ = 0.96) that proved considerably higher than the moderate agreement between consensus values in DSA cons versus StOR (κ = 0.43)., Conclusion: CO 2 -CACT proved feasible, and has the potential to optimize angiographic work-up of PAD in patients with contraindications for other contrast media.

Objective: Anterior lumbar interbody fusion (ALIF) and lateral lumbar interbody fusion (LLIF) are alternative and less invasive techniques to stabilize the spine and indirectly decompress the neural elements compared with open posterior approaches. While reoperation rates have been described for open posterior lumbar surgery, there are sparse data on reoperation rates following these less invasive procedures without direct posterior decompression. This study aimed to evaluate the overall rate, cause, and timing of reoperation procedures following anterior or lateral lumbar interbody fusions without direct posterior decompression., Methods: This was a retrospective cohort study of all consecutive patients indicated for an ALIF or LLIF for lumbar spine at a single academic institution. Patients who underwent concomitant posterior fusion or direct decompression surgeries were excluded. Rates, causes, and timing of reoperations were analyzed. Patients who underwent a revision decompression were matched with patients who did not require a reoperation, and preoperative imaging characteristics were analyzed to assess for risk factors for the reoperation., Results: The study cohort consisted of 529 patients with an average follow-up of 2.37 years; 40.3% (213/529) and 67.3% (356/529) of patients had a minimum of 2 years and 1 year of follow-up, respectively. The total revision rate was 5.7% (30/529), with same-level revision in 3.8% (20/529) and adjacent-level revision in 1.9% (10/529) of patients. Same-level revision patients had significantly shorter time to revision (7.14 months) than adjacent-level revision patients (31.91 months) (p < 0.0001). Fifty percent of same-level revisions were for a posterior decompression. After further analysis of decompression revisions, an increased preoperative canal area was significantly associated with a lower risk of further decompression revision compared to the control group (p = 0.015; OR 0.977, 95% CI 0.959-0.995)., Conclusions: There was a low reoperation rate after anterior or lateral lumbar interbody fusions without direct posterior decompression. The majority of same-level reoperations were due to a need for further decompression. Smaller preoperative canal diameters were associated with the need for revision decompression.

Background: Chemosaturation with percutaneous hepatic perfusion (CS-PHP; Hepatic CHEMOSAT® Delivery System; Delcath Systems Inc, USA) is a novel interventional procedure, which delivers high doses of melphalan directly to the liver in patients with liver tumors while limiting systemic toxicity through hemofiltration of the hepatic venous blood. We have previously shown promising efficacy for patients with ocular melanoma (OM) and cholangiocarcinoma (CCA) within our single-center and multi-center experiences. The aim of this study was to analyze the safety and efficacy of CS-PHP after 141 treatments at Hannover Medical School, Germany., Methods: Overall response rates (ORR) were assessed according to Response Evaluation Criteria In Solid Tumors (RECIST1.1). Median Overall survival (mOS), median progression-free survival (mPFS), and median hepatic PFS (mhPFS) were analyzed using the Kaplan-Meier estimation., Results: Overall, 60 patients were treated with CS-PHP in the salvage setting from October 2014 until January 2019 at Hannover Medical School with a total of 141 procedures. Half of the patients were patients with hepatic metastases of ocular melanoma (OM) (n = 30), 14 patients had CCA (23.3%), 6 patients had hepatocellular carcinoma (10%), and 10 patients were treated for other secondary liver malignancies (16.7%). In total, ORR and disease stabilization rate were 33.3% and 70.3% (n = 25), respectively. ORR was highest for patients with OM (42.3%), followed by patients with CCA (30.8%). Independent response-associated factors were normal levels of lactate dehydrogenase (odds ratio (OR) 13.7; p = 0.015) and diagnosis with OM (OR 9.3; p = 0.028). Overall, mOS was 9 months, mPFS was 4 months, and mhPFS was 5 months. Patients with OM had the longest mOS, mPFS, and mhPFS with 12, 6, and 6 months, respectively. Adverse events included most frequently significant, but transient, hematologic toxicities (80% of grade 3/4 thrombopenia), less frequently hepatic injury up to liver failure (3.3%) and cardiovascular events including two cases of ischemic insults (5%)., Conclusion: Salvage treatment with CS-PHP is safe and effective particularly in patients OM and CCA. Careful attention should be paid to possible, serious hepatic, and cardiovascular complications.

It has been recently recognized that controlled surface structuring on the nanometer scale is a successful strategy to endow different materials with antimicrobial properties. Despite many studies on bacterial interactions with nanostructured surfaces, a quantitative link between surface topography and bacterial adhesion is still missing. To quantitatively link cell adhesion data with topographical surface parameters, we performed single-cell spectroscopy on chemically identical surfaces with controlled nano-contact point density achieved by immobilization of gold nanoparticles (AuNP) on gold thin films. Such materials surfaces have previously shown antimicrobial (anti-adhesive) efficacy towards Gram-negative Escherichia coli cells. In the current study, the influence of nano-structured surfaces on the surface coverage and adhesion forces of clinically relevant Candida albicans (C. albicans), the fungus primarily associated with implant infections, was investigated to validate their antimicrobial potency against different microbial cells. The adhesion forces of C. albicans cells to nanostructured surfaces showed a decreasing trend with decreasing contact-point density and correlated well with the results of the respective C. albicans cell counts. The surfaces with the lowest contact-point density, 25 AuNP/μm², resulted in an average adhesion force of 5 nN, which was up to 5 times lower compared to control and 61 AuNP/μm² surfaces. Further, detailed analyses of force-distance curves revealed that the work of adhesion, and thus the energy required to remove the C. albicans cell from the surface is up to 10 times lower on 25 AuNP/μm² surfaces compared to unstructured surfaces. These findings show that a controlled tuning of nanostructured surfaces in terms of accessible nano-contact points is crucial to generate surface structures with enhanced antimicrobial properties. The gained knowledge can be further exploited for the design of biomaterials surfaces to prevent adhesion of some most commonly encountered pathogens., Competing Interests: Declaration of Competing Interest The authors declare no competing interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: Civil air travel is increasingly recognized as an important potential source for the rapid spread of infectious diseases that were geographically confined in the past, creating international epidemics with great health and socio-economic impact., Objective: The objective of this systematic review is to elucidate the correlations of materials surfaces (composition, structure, properties) and microbial dependences on them in aircraft., Methods: The review was prepared according to PRISMA guidelines. Based on a systematic search for studies published before 30 June 2018 in English, we selected and reviewed the contamination, tenacity, and transmission of microorganisms related to specific surfaces within the aircraft cabin. We also reviewed the chemical composition and properties of these surface materials applied within aircraft., Results: From a total of 828 records 15 articles were included for further analysis in this systematic review, indicating that the aircraft interior surfaces in seat areas (tray tables, armrests, seat covers) and lavatories (door knob handles, toilet flush buttons) are generally colonized by various types of potentially hazardous microorganisms., Conclusions: The interior surfaces in seat and lavatory areas could pose higher health risks by causing infections due to their relatively high microbial contamination compared with other interior surfaces. The classification, chemical composition, surface structures and physicochemical properties of materials surfaces have a varied effect on the adhesion, colonization, tenacity and potential transmission of microorganisms within the aircraft cabin. Strategies are proposed for the interruption of surface-related infection chains in the aircraft field., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Bactericidal materials gained interest in the health care sector as they are capable of preventing material surfaces from microbial colonization and subsequent spread of infections. However, commercialization of antimicrobial materials requires proof of their efficacy, which is usually done using in vitro methods. The ISO 22196 standard (Japanese test method JIS Z 2801) is a method for measuring the antibacterial activity of daily goods. As it was found reliable for testing the biocidal activity of antimicrobially active materials and surface coatings most of the laboratories participating in this study used this protocol. Therefore, a round robin test for evaluating antimicrobially active biomaterials had to be established. To our knowledge, this is the first report on inaugurating a round robin test for the ISO 22196 / JIS Z 2801. The first round of testing showed that analyses in the different laboratories yielded different results, especially for materials with intermediate antibacterial effects distinctly different efficacies were noted. Scrutinizing the protocols used by the different participants and identifying the factors influencing the test outcomes the approach was unified. Four critical factors influencing the outcome of antibacterial testing were identified in a series of experiments: (1) incubation time, (2) bacteria starting concentration, (3) physiological state of bacteria (stationary or exponential phase of growth), and (4) nutrient concentration. To our knowledge, this is the first time these parameters have been analyzed for their effect on the outcome of testing according to ISO 22196 / JIS Z 2801. In conclusion, to enable assessment of the results obtained it is necessary to evaluate these single parameters in the test protocol carefully. Furthermore, uniform and robust definitions of the terms antibacterial efficacy / activity, bacteriostatic effects, and bactericidal action need to be agreed upon to simplify communication of results and also regulate expectations regarding antimicrobial tests, outcomes, and materials.

Surface structures in the nanometer range emerge as the next evolutionary breakthrough in the design of biomaterials with antimicrobial properties. However, in order to advance the application of surface nanostructuring strategies in medical implants, the very nature of the microbial repealing mechanism has yet to be understood. Herein, we demonstrate that the random immobilization of gold nanoparticles (AuNPs) on a material's surface generates the possibility to explore microbial adhesion in dependence of contact point densities at the biointerface between the microbe, i.e., Escherichia coli and the material's surface. By optimizing the contact point density defined by individual AuNPs, yet keeping the surface chemistry unchanged as evidenced by X-ray photoelectron spectroscopy, we show that the initial microbial adhesion can be successfully reduced up to 50%, compared to control (unstructured) surfaces. Furthermore, we observed a decrease in the size of microbial cells adhered to nanostructured surfaces. The results show that the spatial distance between the contact points plays a crucial role in regulating microbial adhesion, thus advancing our understanding of the microbial adhesion mechanism on nanostructured surfaces. We suggest that the introduced strategy for nanostructuring materials surfaces opens a research direction for highly microbial-resistant biomaterials., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Differential proteomics targeting the protein abundance is commonly used to follow changes in biological systems. Differences in localization and degree of post-translational modifications of proteins including phosphorylations are of tremendous interest due to the anticipated role in molecular regulatory processes. Because of their particular low abundance in prokaryotes, identification and quantification of protein phosphorylation is traditionally performed by either comparison of spot intensities on two-dimensional gels after differential phosphoprotein staining or gel-free by stable isotope labeling, sequential phosphopeptide enrichment and following LC-MS analysis. In the current work, we combined in a proof-of-principle experiment these techniques using 14 N/ 15 N metabolic labeling with succeeding protein separation on 2D gels. The visualization of phosphorylations on protein level by differential staining was followed by protein identification and determination of phosphorylation sites and quantification by LC-MS/MS. This approach should avoid disadvantages of traditional workflows, in particular the limited capability of peptide-based gel-free methods to quantify isoforms of proteins. Comparing control and stress conditions allowed for relative quantification in protein phosphorylation in Bacillus pumilus exposed to hydrogen peroxide. Altogether, we quantified with this method 19 putatively phosphorylated proteins., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: Although the crucial importance of sediments in aquatic systems is well-known, sediments are often neglected as a factor in the evaluation of water quality assessment. To support and extend previous work in that field, this study was conducted to assess the impact of surface water and sediment on fish embryos in the case of a highly anthropogenically influenced river catchment in Central Hesse, Germany., Results: The results of 96 h post fertilisation fish embryo toxicity test with Danio rerio (according to OECD Guideline 236) revealed that river samples comprising both water and sediment exert pivotal effects in embryos, whereas surface water alone did not. The most prominent reactions were developmental delays and, to some extent, malformations of embryos. Developmental delays occurred at rates up to 100% in single runs. Malformation rates ranged mainly below 10% and never exceeded 25%., Conclusion: A clear relationship between anthropogenic point sources and detected effects could not be established. However, the study illustrates the critical condition of the entire river system with respect to embryotoxic potentials present even at the most upstream test sites. In addition, the study stresses the necessity to take into account sediments for the evaluation of ecosystem health in industrialised areas.

Study Design: Inter- and intra-rater variability study., Objective: On the basis of a Scoliosis Research Society effort, this study seeks to determine whether the new adult spinal deformity (ASD) classification system is clear and reliable., Summary of Background Data: A classification of adult ASD can serve several purposes, including consistent characterization of a clinical entity, a basis for comparing different treatments, and recommended treatments. Although pediatric scoliosis classifications are well established, an ASD classification is still being developed. A previous classification developed by Schwab et al has met with clinical relevance but did not include pelvic parameters, which have shown substantial correlation with health-related quality of life measures in recent studies., Methods: Initiated by the Scoliosis Research Society Adult Deformity Committee, this study revised a previously published classification to include pelvic parameters. Modifier cutoffs were determined using health-related quality of life analysis from a multicenter database of adult deformity patients. Nine readers graded 21 premarked cases twice each, approximately 1 week apart. Inter- and intra-rater variability and agreement were determined for curve type and each modifier separately. Fleiss' kappa was used for reliability measures, with values of 0.00 to 0.20 considered slight, 0.21 to 0.40 fair, 0.41 to 0.60 moderate, 0.61 to 0.80 substantial, and 0.81 to 1.00 almost perfect agreement., Results: Inter-rater kappa for curve type was 0.80 and 0.87 for the 2 readings, respectively, with modifier kappas of 0.75 and 0.86, 0.97 and 0.98, and 0.96 and 0.96 for pelvic incidence minus lumbar lordosis (PI-LL), pelvic tilt (PT), and sagittal vertical axis (SVA), respectively. By the second reading, curve type was identified by all readers consistently in 66.7%, PI-LL in 71.4%, PT in 95.2%, and SVA in 90.5% of cases. Intra-rater kappa averaged 0.94 for curve type, 0.88 for PI-LL, 0.97 for PT, and 0.97 for SVA across all readers., Conclusion: Data from this study show that there is excellent inter- and intra-rater reliability and inter-rater agreement for curve type and each modifier. The high degree of reliability demonstrates that applying the classification system is easy and consistent.