Search

Aqueous film-forming foams (AFFFs) have been extensively used for extinguishing hydrocarbon-fuel fires at military sites, airports, and fire-training areas. Despite being a significant source of per- and polyfluoroalkyl substances (PFAS), our understanding of PFAS occurrence in AFFF formulations and AFFF-impacted environments is limited, as is the impact of microbial transformation on the environment fate of AFFF-derived PFAS. This literature review compiles PFAS concentrations in electrochemical fluorination (ECF)- and fluorotelomer (FT)-based AFFFs and provides an overview of PFAS occurrence in AFFF-impacted environments. Our analysis reveals that AFFF use is a predominant point source of PFAS contamination, including primary precursors (polyfluoroalkyl substances as AFFF components), secondary precursors (polyfluoroalkyl transformation products of primary precursors), and perfluoroalkyl acids (PFAAs). Moreover, there are discrepancies between PFAS concentration profiles in AFFFs and those measured in AFFF-impacted media. For example, primary precursors constitute 52.6 % and 99.5 % of PFAS mass in ECF- and FT-based AFFFs, respectively, whereas they represent only 0.7 % total mass in AFFF-impacted groundwater. Conversely, secondary precursors, which constitute <1 % of PFAS in AFFFs, represent 4.0-27.8 % of PFAS in AFFF-impacted environments. The observed differences in PFAS levels between AFFFs and environmental samples are likely due to in-situ biotransformation processes. Biotransformation rates and pathways reported for AFFF-derived primary and secondary precursors varied among different classes of precursors, consistent with the PFAS occurrence in AFFF-impacted environments. For example, readily biodegradable primary precursors, N-dimethyl ammonio propyl perfluoroalkane sulfonamide (AmPr-FASA) and n:2 fluorotelomer thioether amido sulfonate (n:2 FtTAoS), were rarely detected in AFFF-impacted environments. In contrast, key secondary precursors, perfluoroalkane sulfonamides (FASAs) and n:2 fluorotelomer sulfonate (n:2 FTS), were widely detected, which was attributed to their resistance to biotransformation. Key knowledge gaps and future research priorities are presented to better understand the occurrence, fate, and transport of AFFF-derived PFAS in the environment and to design more effective remediation strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microbial transformation of per- and polyfluoroalkyl substances (PFAS), including fluorotelomer-derived PFAS, by native microbial communities in the environment has been widely documented. However, few studies have identified the key microorganisms and their roles during the PFAS biotransformation processes. This study was undertaken to gain more insight into the structure and function of soil microbial communities that are relevant to PFAS biotransformation. We collected 16S rRNA gene sequencing data from 8:2 fluorotelomer alcohol and 6:2 fluorotelomer sulfonate biotransformation studies conducted in soil microcosms under various redox conditions. Through co-occurrence network analysis, several genera, including Variovorax , Rhodococcus , and Cupriavidus , were found to likely play important roles in the biotransformation of fluorotelomers. Additionally, a metagenomic prediction approach (PICRUSt2) identified functional genes, including 6-oxocyclohex-1-ene-carbonyl-CoA hydrolase, cyclohexa-1,5-dienecarbonyl-CoA hydratase, and a fluoride-proton antiporter gene, that may be involved in defluorination. This study pioneers the application of these bioinformatics tools in the analysis of PFAS biotransformation-related sequencing data. Our findings serve as a foundational reference for investigating enzymatic mechanisms of microbial defluorination that may facilitate the development of efficient microbial consortia and/or pure microbial strains for PFAS biotransformation.

Aqueous film forming foams (AFFFs) have been used to extinguish fires since the 1960s, leading to widespread subsurface contamination by per- and polyfluoroalkyl substances (PFAS), an essential component of AFFF. This study presents 1-D simulations of PFAS migration in the vadose zone resulting from AFFF releases. Simulation scenarios used soil profiles from three US Air Force (USAF) installations, encompassing a range of climatic conditions and hydrogeologic environments. A three-component mixture, representative of major constituents of AFFF, facilitated the exploration of competitive and synergistic effects of co-constituents on PFAS migration. To accurately capture unsaturated transport of PFAS in porous media, the model considers (1) surfactant-induced flow, (2) non-linear sorption to the solid phase, (3) competitive accumulation at the air-water interface, and (4) the moisture-dependence of the air-water interfacial area. Defined PFAS releases were consistent with fire training exercises, emergency responses, and accidental spills of record. Simulation results illustrate the importance of hydrogeologic, climatic, geochemical, and AFFF release conditions on PFAS transport and retention. Comparison of field observations and model simulations for Ellsworth AFB indicate that much of the PFOA and PFOS mass is associated with the air-water interface and the solid phase, which limits their migration potential in the vadose zone. Results also show that rates of migration in the aqueous phase are largely controlled by hydrogeologic properties, including recharge rates and hydraulic conductivity. AFFF spill scenarios varying in volume, concentration, and frequency reveal the importance of release characteristics in determining rates of PFAS migration and concentration peaks. Variability is attributed to non-linear sorption processes, where, contrary to simple linear partitioning formulations, transport is strongly affected by the concentration of PFAS species. Simulations also demonstrate the importance of modeling the AFFF as a mixture since competitive interfacial accumulation effects are shown to enhance the mobility of less surface-active PFAS compounds., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Linda M. Abriola reports financial support was provided by Strategic Environmental Research and Development Program. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Nearly all per- and polyfluoroalkyl substances (PFAS) biotransformation studies reported to date have been limited to laboratory-scale batch reactors. The fate and transport of PFAS in systems that more closely represent field conditions, i.e., in saturated porous media under flowing conditions, remain largely unexplored. This study investigated the biotransformation of 6:2 fluorotelomer sulfonate (6:2 FTS), a representative PFAS of widespread environmental occurrence, in one-dimensional water-saturated flow-through columns packed with soil obtained from a PFAS-contaminated site. The 305-day column experiments demonstrated that 6:2 FTS biotransformation was rate-limited, where a decrease in pore-water velocity from 3.7 to 2.4 cm/day, resulted in a 21.7-26.1 % decrease in effluent concentrations of 6:2 FTS and higher yields (1.0-1.4 mol% vs. 0.3 mol%) of late-stage biotransformation products (C 4 C 7 perfluoroalkyl carboxylates). Flow interruptions (2 and 7 days) were found to enhance 6:2 FTS biotransformation during the 6-7 pore volumes following flow resumption. Model-fitted 6:2 FTS column biotransformation rates (0.039-0.041 cm w 3 /g s /d) were ∼3.5 times smaller than those observed in microcosms (0.137 cm w 3 /g s /d). Additionally, during column experiments, planktonic microbial communities remained relatively stable, whereas the composition of the attached microbial communities shifted along the flow path, which may have been attributed to oxygen availability and the toxicity of 6:2 FTS and associated biotransformation products. Genus Pseudomonas dominated in planktonic microbial communities, while in the attached microbial communities, Rhodococcus decreased and Pelotomaculum increased along the flow path, suggesting their potential involvement in early- and late-stage 6:2 FTS biotransformation, respectively. Overall, this study highlights the importance of incorporating realistic environmental conditions into experimental systems to obtain a more representative assessment of in-situ PFAS biotransformation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Although 6:2 fluorotelomer sulfonate (6:2 FTS) is a common ingredient in aqueous film-forming foam (AFFF) formulations, its environmental fate at AFFF-impacted sites remains poorly understood. This study investigated the biotransformation of 6:2 FTS in microcosms prepared with soils collected from two AFFF-impacted sites; the former Loring Air Force Base (AFB) and Robins AFB. The half-life of 6:2 FTS in Loring soil was 43.3 days; while >60 mol% of initially spiked 6:2 FTS remained in Robins soil microcosms after a 224-day incubation. Differences in initial sulfate concentrations and the depletion of sulfate over the incubation likely contributed to the different 6:2 FTS biotransformation rates between the two soils. At day 224, stable transformation products, i.e., C 4 C 7 perfluoroalkyl carboxylates, were formed with combined molar yields of 13.8 mol% and 1.2 mol% in Loring and Robins soils, respectively. Based on all detected transformation products, the biotransformation pathways of 6:2 FTS in the two soils were proposed. Microbial community analysis suggests that Desulfobacterota microorganisms may promote 6:2 FTS biotransformation via more efficient desulfonation. In addition, species from the genus Sphingomonas, which exhibited higher tolerance to elevated concentrations of 6:2 FTS and its biotransformation products, are likely to have contributed to 6:2 FTS biotransformation. This study demonstrates the potential role of biotransformation processes on the fate of 6:2 FTS at AFFF-impacted sites and highlights the need to characterize site biogeochemical properties for improved assessment of 6:2 FTS biotransformation behavior., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Perfluoroalkyl acids (PFAAs) have been shown to inhibit biodegradation (i.e., organohalide respiration) of chlorinated ethenes. The potential negative impacts of PFAAs on microbial species performing organohalide respiration, particularly Dehalococcoides mccartyi ( Dhc ), and the efficacy of in situ bioremediation are a critical concern for comingled PFAA-chlorinated ethene plumes. Batch reactor (no soil) and microcosm (with soil) experiments, containing a PFAA mixture and bioaugmented with KB-1, were completed to assess the impact of PFAAs on chlorinated ethene organohalide respiration. In batch reactors, PFAAs delayed complete biodegradation of cis -1,2-dichloroethene ( cis -DCE) to ethene. Maximum substrate utilization rates (a metric for quantifying biodegradation rates) were fit to batch reactor experiments using a numerical model that accounted for chlorinated ethene losses to septa. Fitted values for cis -DCE and vinyl chloride biodegradation were significantly lower ( p < 0.05) in batch reactors containing ≥50 mg/L PFAAs. Examination of reductive dehalogenase genes implicated in ethene formation revealed a PFAA-associated change in the Dhc community from cells harboring the vcrA gene to those harboring the bvcA gene. Organohalide respiration of chlorinated ethenes was not impaired in microcosm experiments with PFAA concentrations of 38.7 mg/L and less, suggesting that a microbial community containing multiple strains of Dhc is unlikely to be inhibited by PFAAs at lower, environmentally relevant concentrations.

Production of 8:2 fluorotelomer alcohol (8:2 FTOH) for industrial and consumer products, including aqueous film-forming foams (AFFFs) used for firefighting, has resulted in its widespread occurrence in the environment. However, the fate of 8:2 FTOH at AFFF-impacted sites remains largely unknown. Using AFFF-impacted soils from two United States Air Force Bases, microcosm experiments evaluated the aerobic biotransformation of 8:2 FTOH (extent and byproduct formation) and the dose-response on microbial communities due to 8:2 FTOH exposure. Despite different microbial communities, rapid transformation of 8:2 FTOH was observed during a 90-day incubation in the two soils, and 7:2 secondary fluorotelomer alcohol (7:2 sFTOH) and perfluorooctanoic acid (PFOA) were detected as major transformation products. Novel transformation products, including perfluoroalkane-like compounds (1H-perfluoroheptane, 1H-perfluorohexane, and perfluoroheptanal) were identified by liquid chromatography-high resolution mass spectrometry (LC-HRMS) and used to develop aerobic 8:2 FTOH biotransformation pathways. Microbial community analysis suggests that species from genus Sphingomonas are potential 8:2 FTOH degraders based on increased abundance in both soils after exposure, and the genus Afipia may be more tolerant to and/or involved in the transformation of 8:2 FTOH at elevated concentrations. These findings demonstrate the potential role of biological processes on PFAS fate at AFFF-impacted sites through fluorotelomer biotransformation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Isoprene is a ubiquitously distributed, biogenic, and climate-active organic compound. Microbial isoprene degradation in oxic environments is fairly well understood; however, studies exploring anaerobic isoprene metabolism remain scarce, with no isolates for study available. Here, we obtained an acetogenic isolate, designated Acetobacterium wieringae strain Y, which hydrogenated isoprene to a mixture of methyl-1-butenes at an overall rate of 288.8 ± 20.9 μM day -1 with concomitant acetate production at a rate of 478.4 ± 5.6 μM day -1 . Physiological characterization demonstrated that isoprene was not utilized in a respiratory process; rather, isoprene promoted acetogenesis kinetically. Bioinformatic analysis and proteomics experiments revealed the expression of candidate ene-reductases responsible for isoprene biohydrogenation. Notably, the addition of isoprene to strain Y cultures stimulated the expression of proteins associated with the Wood-Ljungdahl pathway, indicating unresolved impacts of isoprene on carbon cycling and microbial ecology in anoxic environments (e.g., promoting CO 2 plus H 2 reductive acetogenesis while inhibiting methanogenesis). Our new findings advance understanding of microbial transformation of isoprene under anoxic conditions and suggest that anoxic environments are isoprene sinks. IMPORTANCE Isoprene is the most abundant, biologically generated, volatile organic compound on Earth, with estimated emissions in the same magnitude as methane. Nonetheless, a comprehensive knowledge of isoprene turnover in the environment is lacking, impacting global isoprene flux models and our understanding of the environmental fate and longevity of isoprene. A critical knowledge gap that has remained largely unexplored until recently is the microbiology and associated molecular mechanisms involved in the anaerobic biotransformation of isoprene. By integrating culture-dependent approaches with omics techniques, we isolated an acetogen, Acetobacterium wieringae strain Y, capable of anaerobic biohydrogenation of isoprene. We obtained the complete genome of strain Y, and proteomic experiments identified candidate ene-reductases for catalyzing the asymmetric reduction of the electronically activated carbon-carbon double bond of isoprene. We also demonstrated that isoprene biohydrogenation stimulates the expression of Wood-Ljungdahl pathway enzymes. This study emphasizes the ecological roles of specialized Acetobacterium on the natural cycling of isoprene in anoxic environments and the potential effects of isoprene biohydrogenation on acetogens and methanogens, which have implications for global climate change and bioenergy production.

The environmental fate of per- and polyfluoroalkyl substances (PFAS) in aqueous film-forming foams (AFFFs) remains largely unknown, especially under the conditions representative of natural subsurface systems. In this study, the biotransformation of 8:2 fluorotelomer alcohol (8:2 FTOH), a component of new-generation AFFF formulations and a byproduct in fluorotelomer-based AFFFs, was investigated under nitrate-, iron-, and sulfate-reducing conditions in microcosms prepared with AFFF-impacted soils. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) and high-resolution mass spectrometry (HRMS) were employed to identify biotransformation products. The biotransformation was much slower under sulfate- and iron-reducing conditions with >60 mol % of initial 8:2 FTOH remaining after ∼400 days compared to a half-life ranging from 12.5 to 36.5 days under nitrate-reducing conditions. Transformation products 8:2 fluorotelomer saturated and unsaturated carboxylic acids (8:2 FTCA and 8:2 FTUA) were detected under all redox conditions, while 7:2 secondary fluorotelomer alcohol (7:2 sFTOH) and perfluorooctanoic acid (PFOA) were only observed as transformation products under nitrate-reducing conditions. In addition, 1H-perfluoroheptane (F(CF 2 ) 6 CF 2 H) and 3-F-7:3 acid (F(CF 2 ) 7 CFHCH 2 COOH) were identified for the first time during 8:2 FTOH biotransformation. Comprehensive biotransformation pathways for 8:2 FTOH are presented, which highlight the importance of accounting for redox condition and the related microbial community in the assessment of PFAS transformations in natural environments.

Per- and polyfluoralkyl substances (PFAS) are known to accumulate at interfaces, and the presence of nonaqueous-phase liquids (NAPLs) could influence the PFAS fate in the subsurface. Experimental and mathematical modeling studies were conducted to investigate the effect of a representative NAPL, tetrachloroethene (PCE), on the transport behavior of PFAS in a quartz sand. Perfluorooctanesulfonate (PFOS), perfluorononanoic acid (PFNA), a 1:1 mixture of PFOS and PFNA, and a mixture of six PFAS (PFOS, PFNA, perfluorooctanoic acid (PFOA), perfluoroheptanoic acid (PFHpA), perfluorohexanesulfonate (PFHxS), and perfluorobutanesulfonate (PFBS)) were used to assess PFAS interactions with PCE-NAPL. Batch studies indicated that PFAS partitioning into PCE-NAPL ( K nw < 0.1) and adsorption on 60-80 mesh Ottawa sand ( K d < 6 × 10 -5 L/g) were minimal. Column studies demonstrated that the presence of residual PCE-NAPL (∼16% saturation) delayed the breakthrough of PFOS and PFNA, with minimal effects on the mobility of PFBS, PFHpA, PFHxS, and PFOA. Breakthrough curves (BTCs) obtained for PFNA and PFOS alone and in mixtures were nearly identical, indicating the absence of competitive adsorption effects. A mathematical model that accounts for NAPL-water interfacial sorption accurately reproduced PFAS BTCs, providing a tool to predict PFAS fate and transport in co-contaminated subsurface environments.

Remediation of groundwater impacted by per- and polyfluoroalkyl substances (PFAS) is challenging due to the strength of the carbon-fluorine bond and the need to achieve nanogram per liter drinking water targets. Previous studies have shown that ion exchange resins can serve as effective sorbents for the removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) in conventional water treatment systems. The objectives of this study were to evaluate the in situ delivery and PFAS sorption capacity of a polymer-stabilized ion exchange resin (S-IXR) consisting of Amberlite® IRA910 beads and Pluronic® F-127 in a quartz sand. At concentrations below 100 µg/L, individual and mixed PFAS adsorption on resin beads exhibited linear isotherms with no apparent competitive effects. However, at concentrations up to 100 mg/L, PFAS adsorption isotherms were non-linear and a mixture of six PFAS exhibited strong competitive effects. In columns packed with 40-50 mesh Ottawa sand, injection of the S-IXR suspension created a uniform sorptive zone that increased PFOA or PFOS retention by more than five orders-of-magnitude compared to untreated control columns. Multi-solute column studies revealed earlier breakthrough of shorter-chain length PFAS, which was consistent with the mixed PFAS adsorption data. These findings indicate that injectable ion exchange resins could provide an effective in situ remediation strategy for PFAS-impacted groundwater plumes., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Although microbial reductive dechlorination (MRD) has proven to be an effective approach for in situ treatment of chlorinated ethenes, field implementation of this technology is complicated by many factors, including subsurface heterogeneity, electron donor availability, and distribution of microbial populations. This work presents a coupled experimental and mathematical modeling study designed to explore the influence of heterogeneity on MRD and to assess the suitability of microcosm-derived rate parameters for modeling complex heterogeneous systems. A Monod-based model is applied to simulate a bioremediation experiment conducted in a laboratory-scale aquifer cell packed with aquifer material from the Commerce Street Superfund site in Williston, VT. Results reveal that (uncalibrated) model application of microcosm-derived dechlorination and microbial growth rates for transformation of trichloroethene (TCE), cis-1,2-dichloroethene (cis-DCE), and vinyl chloride (VC) reproduced observed aquifer cell concentration levels and trends. Mean relative errors between predicted and measured effluent concentrations were quantified as 6.7%, 27.0%, 41.5%, 32.0% and 21.6% over time for TCE, cis-DCE, VC, ethene and total volatile fatty acids (fermentable electron donor substrate and carbon source), respectively. The time-averaged extent of MRD (i.e., ethene formation) was well-predicted (4% underprediction), with modeled MRD exhibiting increased deviation from measured values under electron donor limiting conditions (maximum discrepancy of 14%). In contrast, simulations employing a homogeneous (uniform flow) domain resulted in underprediction of MRD extent by an average of 13%, with a maximum discrepancy of 45%. Model sensitivity analysis suggested that trace amounts of natural dissolved organic carbon served as an important fermentable substrate, providing up to 69% of the reducing equivalents consumed for MRD under donor-limiting conditions. Aquifer cell port concentration data and model simulations revealed that ethene formation varied spatially within the domain and was associated with regions of longer residence times. These results demonstrate the strong influence of subsurface heterogeneity on the accuracy of MRD predictions, and highlight the importance of subsurface characterization and the incorporation of flow field uncertainty in model applications for successful design and assessment of in situ bioremediation., Competing Interests: Declaration of competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Dehalococcoidia ( Dia ) class microorganisms are frequently found in various pristine and contaminated environments. Metagenome-assembled genomes (MAGs) and single-cell amplified genomes (SAGs) studies have substantially improved the understanding of Dia microbial ecology and evolution; however, an updated thorough investigation on the genomic and evolutionary characteristics of Dia microorganisms distributed in geographically distinct environments has not been implemented. In this study, we analyzed available genomic data to unravel Dia evolutionary and metabolic traits. Based on the phylogeny of 16S rRNA genes retrieved from sixty-seven genomes, Dia microorganisms can be categorized into three groups, the terrestrial cluster that contains all Dehalococcoides and Dehalogenimonas strains, the marine cluster I, and the marine cluster II. These results reveal that a higher ratio of horizontally transferred genetic materials was found in the Dia marine clusters compared to that of the Dia terrestrial cluster. Pangenome analysis further suggests that Dia microorganisms have evolved cluster-specific enzymes (e.g., dehalogenase in terrestrial Dia , sulfite reductase in marine Dia ) and biosynthesis capabilities (e.g., siroheme biosynthesis in marine Dia ). Marine Dia microorganisms are likely adapted to versatile metabolisms for energy conservation besides organohalide respiration. The genomic differences between marine and terrestrial Dia may suggest distinct functions and roles in element cycling (e.g., carbon, sulfur, chlorine), which require interdisciplinary approaches to unravel the physiology and evolution of Dia in various environments., (Copyright © 2020 Yang, Zhang, Cápiro and Yan.)

Diffusion, sorption-desorption, and biodegradation influence chlorinated solvent storage in, and release (mass flux) from, low-permeability media. Although bioenhanced dissolution of non-aqueous phase liquids has been well-documented, less attention has been directed towards biologically-mediated enhanced diffusion from low-permeability media. This process was investigated using a heterogeneous aquifer cell, packed with 20-30 mesh Ottawa sand and lenses of varying permeability (1.0 × 10 -12 -1.2 × 10 -11  m 2 ) and organic carbon (OC) content (<0.1%-2%), underlain by trichloroethene (TCE)-saturated clay. Initial contaminant loading was attained by flushing with 0.5 mM TCE. Total chlorinated ethenes removal by hydraulic flushing was then compared for abiotic and bioaugmented systems (KB-1® SIREM; Guelph, ON). A numerical model incorporating coupled diffusion and (de)sorption facilitated quantification of bio-enhanced TCE release from low-permeability lenses, which ranged from 6% to 53%. Although Dehalococcoides mccartyi (Dhc) 16S rRNA genes were uniformly distributed throughout the porous media, strain-specific distribution, as indicated by the reductive dehalogenase (RDase) genes vcrA, bvcA, and tceA, was influenced by physical and chemical heterogeneity. Cells harboring the bvcA gene comprised 44% of the total RDase genes in the lower clay layer and media surrounding high OC lenses, but only 2% of RDase genes at other locations. Conversely, cells harboring the vcrA gene comprised 50% of RDase genes in low-permeability media compared with 85% at other locations. These results demonstrate the influence of microbial processes on back diffusion, which was most evident in regions with pronounced contrasts in permeability and OC content. Bioenhanced mass transfer and changes in the relative abundance of Dhc strains are likely to impact bioremediation performance in heterogeneous systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The class Dehalococcoidia within the Chloroflexi phylum comprises the obligate organohalide-respiring genera Dehalococcoides , Dehalogenimonas , and " Candidatus Dehalobium." Knowledge of the unique ecophysiology and biochemistry of Dehalococcoidia has been largely derived from studies with enrichment cultures and isolates from sites impacted with chlorinated pollutants; however, culture-independent surveys found Dehalococcoidia sequences in marine, freshwater, and terrestrial biomes considered to be pristine (i.e., not impacted with organohalogens of anthropogenic origin). The broad environmental distribution of Dehalococcoidia , as well as other organohalide-respiring bacteria, supports the concept of active halogen cycling and the natural formation of organohalogens in various ecosystems. Dechlorination reduces recalcitrance and renders organics susceptible to metabolic oxidation by diverse microbial taxa. During reductive dechlorination, hydrogenotrophic organohalide-respiring bacteria, in particular Dehalococcoidia , can consume hydrogen to low consumption threshold concentrations (<0.3 nM) and enable syntrophic oxidation processes. These functional attributes and the broad distribution imply that Dehalococcoidia play relevant roles in carbon cycling in anoxic ecosystems., (Copyright © 2020 Yang et al.)

Coupling in situ thermal treatment (ISTT) with microbial reductive dechlorination (MRD) has the potential to enhance contaminant degradation and reduce cleanup costs compared to conventional standalone remediation technologies. Impacts of low-temperature ISTT on Dehalococcoides mccartyi (Dhc), a relevant species in the anaerobic degradation of cis-1,2-dichloroethene (cis-DCE) and vinyl chloride (VC) to nontoxic ethene, were assessed in sand-packed columns under dynamic flow conditions. Dissolved tetrachloroethene (PCE; 258 ± 46 μM) was introduced to identical columns bioaugmented with the PCE-to-ethene dechlorinating consortium KB-1 ® . Initial column temperatures represented a typical aquifer (15 °C) or a site undergoing low-temperature ISTT (35 °C), and were subsequently increased to 35 and 74 °C, respectively, to assess temperature impacts on reductive dechlorination activity. In the 15 °C column, PCE was transformed primarily to cis-DCE (159 ± 2 μM), which was further degraded to VC (164 ± 3 μM) and ethene (30 ± 0 μM) within 17 pore volumes (PVs) after the temperature was increased to 35 °C. Regardless of the initial column temperature, ethene constituted >50 mol% of effluent degradation products in both columns after 73-74 PVs at 35 °C, indicating that MRD performance was greatly improved under low-temperature ISTT conditions. Increasing the temperature of the column initially at 35 °C resulted in continued VC and ethene production until a temperature of approximately 43 °C was reached, at which point Dhc activity substantially decreased. The abundance of the vcrA reductive dehalogenase gene exceeded that of the bvcA gene by 1-2.5 orders of magnitude at 15 °C, but this relationship inversed at temperatures >35 °C, suggesting Dhc strain-specific responses to temperature. These findings demonstrate improved MRD performance with low-temperature thermal treatment and emphasize potential synergistic effects at sites undergoing ISTT., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Thermal treatment of soil and groundwater may provide an in situ source of soluble organic compounds and hydrogen (H 2 ) that could stimulate microbial reductive dechlorination (MRD) at sites impacted by chlorinated solvents. The objectives of this study were to identify and quantify the release of electron donors and fermentable precursors during soil heating and to estimate availability of these compounds following thermal treatment. Fourteen solid materials containing <0.01 to 63.81 wt % organic carbon (OC) were incubated at 30, 60, or 90 °C for up to 180 d, leading to the release of direct electron donors (i.e., H 2 and acetate) and fermentable volatile fatty acids (VFAs). Total VFA release ranged from 5 ± 0 × 10 -9 carbon per gram solid (mol C/g s ) during 30 °C incubation of quartz sand to 820 ± 50 × 10 -6 mol C/g s during 90 °C incubation of humic acid, and was positively impacted by incubation time, temperature, and solid-phase OC content. H 2 gas was detected at a maximum of 180 ± 50 × 10 -9 mol H 2 /g s , accounting for less than 0.3% of reducing equivalents associated with VFAs released under the same conditions. These findings will allow for more reliable prediction of substrate release during thermal treatment, supporting the implementation of coupled thermal and biological remediation strategies.

Bioremediation treatment (e.g. biostimulation) can decrease groundwater pH with consequences for Dehalococcoides mccartyi (Dhc) reductive dechlorination activity. To explore the pH resilience of Dhc, the Dhc-containing consortium BDI was exposed to pH 5.5 for up to 40 days. Following 8- and 16-day exposure periods to pH 5.5, dechlorination activity and growth recovered when returned to pH 7.2; however, the ability of the culture to dechlorinate vinyl chloride (VC) to ethene was impaired (i.e. decreased rate of VC transformation). Dhc cells exposed to pH 5.5 for 40 days did not recover the ethene-producing phenotype upon transfer to pH 7.2 even after 200 days of incubation. When returned to pH 7.2 conditions after an 8-, a 16- and a 40-day low pH exposure, tceA and vcrA genes showed distinct fold increases, suggesting Dhc strain-specific responses to low pH exposure. Furthermore, a survey of Dhc biomarker genes in groundwater samples revealed the average abundances of Dhc 16S rRNA, tceA and vcrA genes in pH 4.5-6 groundwater were significantly lower (P-value < 0.05) than in pH 6-8.3 groundwater. Overall, the results of the laboratory study and the assessment of field data demonstrate that sustained Dhc activity should not be expected in low pH groundwater, and the duration of low pH exposure affects the ability of Dhc to recover activity at circumneutral pH., (© FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Bioremediation at chlorinated solvent sites often leads to groundwater acidification due to electron donor fermentation and enhanced dechlorination activity. The microbial reductive dechlorination process is robust at circumneutral pH, but activity declines at groundwater pH values below 6.0. Consistent with this observation, the activity of tetrachloroethene (PCE) dechlorinating cultures declined at pH 6.0 and was not sustained in pH 5.5 medium, with one notable exception. Sulfurospirillum multivorans dechlorinated PCE to cis-1,2-dichloroethene (cDCE) in pH 5.5 medium and maintained this activity upon repeated transfers. Microcosms established with soil and aquifer materials from five distinct locations dechlorinated PCE-to-ethene at pH 5.5 and pH 7.2. Dechlorination to ethene was maintained following repeated transfers at pH 7.2, but no ethene was produced at pH 5.5, and only the transfer cultures derived from the Axton Cross Superfund (ACS) microcosms sustained PCE dechlorination to cDCE as a final product. 16S rRNA gene amplicon sequencing of pH 7.2 and pH 5.5 ACS enrichments revealed distinct microbial communities, with the dominant dechlorinator being Dehalococcoides in pH 7.2 and Sulfurospirillum in pH 5.5 cultures. PCE-to-trichloroethene- (TCE-) and PCE-to-cDCE-dechlorinating isolates obtained from the ACS pH 5.5 enrichment shared 98.6%, and 98.5% 16S rRNA gene sequence similarities to Sulfurospirillum multivorans. These findings imply that sustained Dehalococcoides activity cannot be expected in low pH (i.e., ≤ 5.5) groundwater, and organohalide-respiring Sulfurospirillum spp. are key contributors to in situ PCE reductive dechlorination under low pH conditions.

Effective treatment of sites contaminated with dense non-aqueous phase liquids (DNAPLs) requires detailed understanding of the microbial community responses to changes in source zone strength and architecture. Changes in the spatial and temporal distributions of the organohalide-respiring Dehalococcoides mccartyi (Dhc) strains and Geobacter lovleyi strain SZ (GeoSZ) were examined in a heterogeneous tetrachloroethene- (PCE-) DNAPL source zone within a two-dimensional laboratory-scale aquifer flow cell. As part of a combined remedy approach, flushing with 2.3 pore volumes (PVs) of 4% (w/w) solution of the nonionic, biodegradable surfactant Tween® 80 removed 55% of the initial contaminant mass, and resulted in a PCE-DNAPL distribution that contained 51% discrete ganglia and 49% pools (ganglia-to-pool ratio of 1.06). Subsequent bioaugmentation with the PCE-to-ethene-dechlorinating consortium BDI-SZ resulted in cis-1,2-dichloroethene (cis-DCE) formation after 1 PV (ca. 7 days), while vinyl chloride (VC) and ethene were detected 10 PVs after bioaugmentation. Maximum ethene yields (ca. 90 μM) within DNAPL pool and ganglia regions coincided with the detection of the vcrA reductive dehalogenase (RDase) gene that exceeded the Dhc 16S rRNA genes by 2.0±1.3 and 4.0±1.7 fold in the pool and ganglia regions, respectively. Dhc and GeoSZ cell abundance increased by up to 4 orders-of-magnitude after 28 PVs of steady-state operation, with 1 to 2 orders-of-magnitude increases observed in close proximity to residual PCE-DNAPL. These observations suggest the involvement of these dechlorinators the in observed PCE dissolution enhancements of up to 2.3 and 6.0-fold within pool and ganglia regions, respectively. Analysis of the solid and aqueous samples at the conclusion of the experiment revealed that the highest VC (≥155 μM) and ethene (≥65 μM) concentrations were measured in zones where Dhc and GeoSZ were predominately attached to the solids. These findings demonstrate dynamic responses of organohalide-respiring bacteria in a heterogeneous DNAPL source zone, and emphasize the influence of source zone architecture on bioremediation performance., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Contemporary microbial monitoring of aquifers relies on groundwater samples to enumerate nonattached cells of interest. One-dimensional column studies quantified the distribution of bacterial cells in solid and the aqueous phases as a function of microbial species, growth substrate availability and porous medium (i.e., Appling soil versus Federal Fine Ottawa sand with 0.75% and 0.01% [w/w] organic carbon, respectively). Without supplied growth substrates, effluent from columns inoculated with the tetrachloroethene- (PCE-) to-ethene-dechlorinating bacterial consortium BDI-SZ containing Dehalococcoides mccartyi (Dhc) strains and Geobacter lovleyi strain SZ (GeoSZ), or inoculated with Anaeromyxobacter dehalogenans strain W (AdehalW), captured 94-96, 81-99, and 73-84% of the Dhc, GeoSZ, and AdehalW cells, respectively. Cell retention was organism-specific and increased in the order Dhc < GeoSZ < AdehalW. When amended with 10 mM lactate and 0.11 mM PCE, aqueous samples accounted for 1.3-27 and 0.02-22% of the total Dhc and GeoSZ biomass, respectively. In Appling soil, up to three orders-of-magnitude more cells were associated with the solid phase, and attachment rate coefficients (katt) were consistently greater compared to Federal Fine sand. Cell-solid interaction energies ranged from -2.5 to 787 kT and were consistent with organism-specific deposition behavior, where GeoSZ and AdehalW exhibited greater attachment than Dhc cells. The observed disparities in microbial cell distributions between the aqueous and solid phases imply that groundwater analysis can underestimate the total cell abundance in the aquifer by orders-of-magnitude under conditions of growth and in porous media with elevated organic carbon content. The implications of these findings for monitoring chlorinated solvent sites are discussed.

Parkinson disease (PD) is characterized by the selective demise of dopaminergic (DA) neurons in the substantial nigra pars compacta. Dysregulation of transcriptional factor myocyte enhancer factor 2D (MEF2D) has been implicated in the pathogenic process in in vivo and in vitro models of PD. Here, we identified a small molecule bis(3)-cognitin (B3C) as a potent activator of MEF2D. We showed that B3C attenuated the toxic effects of neurotoxin 1-methyl-4-phenylpyridinium (MPP(+)) by activating MEF2D via multiple mechanisms. B3C significantly reduced MPP(+)-induced oxidative stress and potentiated Akt to down-regulate the activity of MEF2 inhibitor glycogen synthase kinase 3β (GSK3β) in a DA neuronal cell line SN4741. Furthermore, B3C effectively rescued MEF2D from MPP(+)-induced decline in both nucleic and mitochondrial compartments. B3C offered SN4741 cells potent protection against MPP(+)-induced apoptosis via MEF2D. Interestingly, B3C also protected SN4741 cells from wild type or mutant A53T α-synuclein-induced cytotoxicity. Using the in vivo PD model of C57BL/6 mice treated with 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine hydrochloride (MPTP), we showed that B3C maintained redox homeostasis, promoted Akt function activity, and restored MEF2D level in midbrain neurons. Moreover, B3C greatly prevented the loss of tyrosine hydroxylase signal in substantial nigra pars compacta DA neurons and ameliorated behavioral impairments in mice treated with MPTP. Collectedly, our studies identified B3C as a potent neuroprotective agent whose effectiveness relies on its ability to effectively up-regulate MEF2D in DA neurons against toxic stress in models of PD in vitro and in vivo.

Recent clinical evidence supports a link between 25-hydroxyvitamin D insufficiency (serum 25-hydroxyvitamin D [25(OH)D] levels <30 ng/mL) and Parkinson's disease. To investigate the effect of 25(OH)D depletion on neuronal susceptibility to toxic insult, we induced a state of 25(OH)D deficiency in mice and then challenged them with the dopaminergic neurotoxin 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). We found there was no significant difference between control and 25(OH)D-deficient animals in striatal dopamine levels or dopamine transporter and tyrosine hydroxylase expression after lesioning with MPTP. Additionally, we found no difference in tyrosine hydroxylase expression in the substantia nigra pars compacta. Our data suggest that reducing 25(OH)D serum levels in mice has no effect on the vulnerability of nigral dopaminergic neurons in vivo in this model system of parkinsonism.

A combination of batch and column experiments evaluated the mass transfer of two candidate partitioning electron donors (PEDs), n-hexanol (nHex) and n-butyl acetate (nBA), for enhanced bioremediation of trichloroethene (TCE)-dense nonaqueous phase liquid (DNAPL). Completely mixed batch reactor experiments yielded equilibrium TCE-DNAPL and water partition coefficients (KNW) for nHex and nBA of 21.7 ± 0.27 and 330.43 ± 6.7, respectively, over a range of initial PED concentrations up to the aqueous solubility limit of ca. 5000 mg/L. First-order liquid-liquid mass transfer rates determined in batch reactors with nBA or nHex concentrations near the aqueous solubility were 0.22 min(-1) and 0.11 min(-1), respectively. Liquid-liquid mass transfer under dynamic flow conditions was assessed in one-dimensional (1-D) abiotic columns packed with Federal Fine Ottawa sand containing a uniform distribution of residual TCE-DNAPL. Following pulse injection of PED solutions at pore-water velocities (vp) ranging from 1.2 to 6.0 m/day, effluent concentration measurements demonstrated that both nHex and nBA partitioned strongly into residual TCE-DNAPL with maximum effluent levels not exceeding 35% and 7%, respectively, of the applied concentrations of 4000 to 5000 mg/L. PEDs persisted at effluent concentrations above 5 mg/L for up to 16 and 80 pore volumes for nHex and nBA, respectively. Mathematical simulations yielded KNW values ranging from 44.7 to 48.2 and 247 to 291 and liquid-liquid mass transfer rates of 0.01 to 0.03 min(-1) and 0.001 to 0.006 min(-1) for nHex and nBA, respectively. The observed TCE-DNAPL and water mass transfer behavior suggests that a single PED injection can persist in a treated source zone for prolonged time periods, thereby reducing the need for, or frequency of, repeated electron donor injections to support bacteria that derive reducing equivalents for TCE reductive dechlorination from PED fermentation.

The microbial community response to a neat ethanol release (E100, 76 l) onto residual hydrocarbons in sandy soil was evaluated in a continuous-flow 8 m(3) pilot-scale aquifer tank, simulating a release at a bulk fuel terminal. Microbial genotypic shifts were assessed using quantitative real-time PCR analysis. High ethanol concentrations in the capillary fringe at potentially toxic levels, exceeding 100,000 mg l(-1), were tolerated by the microbial community. The high biochemical oxygen demand exerted by ethanol rapidly induced anaerobic conditions, and both methane production (up to 1.2 mg l(-1)) and growth of putative methanogenic Archaea (up to 10(6) gene copies per g of soil) were observed in shallow groundwater and soil samples 75 cm down gradient from the source. Aerobic conditions returned after ethanol was flushed out of the system, approximately 45 days after the spill (less than 7.5 pore volumes flushed). Total Bacteria growth coincided with ethanol migration and availability, which was restricted to a relatively thin layer at the capillary fringe and water table interface. The concentrations of bacteria harbouring the aerobic catabolic genes dmpN (coding for phenol hydroxylase) and to dC1 (coding for toluene dioxygenase) increased (up to 100x) down gradient from the source, likely as a result of both fortuitous growth on ethanol and on aromatic hydrocarbons mobilized by ethanol. Growth of hydrocarbon degraders was corroborated by denaturing gradient gel electrophoresis analysis showing proliferation of Azospirillum and Brevundimonas spp., which are bacteria commonly associated with microaerophilic hydrocarbon degradation. Nevertheless, the relative abundance of hydrocarbon-specific degraders (as a fraction of total Bacteria) decreased as other bacteria grew to a higher extent. Overall, the observed growth of hydrocarbon degraders suggests a potential enhancement in aerobic natural attenuation in shallow aquifers after ethanol and its degradation by-products are degraded or flushed from sites impacted by ethanol-blended fuels.

Fuel-grade ethanol (76L of E95, 95%v/v ethanol, 5%v/v hydrocarbon mixture as a denaturant) was released at the water table in an 8150-L continuous-flow tank packed with fine-grain masonry sand. Ethanol, which is buoyant and hygroscopic, quickly migrated upwards and spread laterally in the capillary zone. Horizontal migration of ethanol occurred through a shallow thin layer with minimal vertical dispersion, and was one order of magnitude slower than the preceding bromide tracer. Dyes, one hydrophobic (Sudan-IV) and one hydrophilic (Fluorescein) provided evidence that the fuel hydrocarbons phase separated from the E95 mixture as ethanol was diluted by pore water and its cosolvent effect was diminished. Most of the added ethanol (98%) was recovered in the effluent wells that captured the flow through the high water content regions above the water table. Complementary bench-scale 2-D visualization experiments with E95 confirmed hydrocarbon phase separation, residual NAPL formation and migration within the capillary fringe. These results corroborate previous bench-scale studies showing that ethanol has high affinity for vadose-zone pore water and can migrate through the capillary zone. The pilot-scale tank experiment provides the first hydrocarbon and ethanol concentration measurements (and thus, quantification of impacts to groundwater quality) from a subsurface spill of E95 in a well-characterized system with a well-defined source. It also provides the first quantitative near-field-scale evidence that capillarity can significantly retard the vertical dispersion and horizontal advection of ethanol. Such effects could be important determinants of the extent of ethanol migration and longevity as well as groundwater impacts.