Search

Selective detection of adenosine monophosphate (AMP) and adenosine diphosphate (ADP) which are less charged molecules than adenosine triphosphate (ATP) or pyrophosphate (PPi) in aqueous solution has been considered challenging because AMP and ADP have relatively low binding affinity for phosphate receptors. In this study, colorimetric discrimination of nucleoside phosphates was achieved based on catalytic signal amplification through the activation of artificial peroxidase. This method showed high selectivity for AMP and ADP over ATP and PPi, unlike previous phosphate sensors that use Zn2+-dipicolylamine-based receptors. High selectivity of the suggested method allowed discrimination of AMP in aqueous solution by the naked eye, and the detection limit was estimated to be 0.5 μM. Mechanism analysis revealed AMP acted as activators in the peroxidation cycle of the Mn2(bpmp)/ABTS/H2O2 system despite having relatively low binding affinity. Additionally, high selectivity and quantitative signal amplification allowed for the development of colorimetric phosphodiesterase and a small molecule kinase assay method. The newly proposed method offers direct, real-time, and quantitative analysis of enzyme activities and inhibition, and is expected to be further applied to high-throughput screening of inhibitors.

Development of a simple, effective, and practical method for (Z)-selective semihydrogenation of alkynes has been considered necessary for easy-to-access applications at organic laboratory scales. Herein, (Z)-selective semihydrogenation of alkynes was achieved using a copper nanocatalyst which was generated in situ simply by adding ammonia borane to an ethanol solution of copper sulfate. Different types of alkynes including aryl–aryl, aryl–alkyl, and aliphatic alkynes were selectively reduced to (Z)-alkenes affording up to 99% isolated yield. The semihydrogenation of terminal alkynes to alkenes and gram-scale applications were also reported. In addition to eliminating catalyst preparation, the proposed approach is simple and practical and serves as a suitable alternative method to the conventional Lindlar catalyst.

In this study, we developed a metal-free and highly chemoselective method for the reduction of aromatic nitro compounds. This reduction was performed using tetrahydroxydiboron [B

(Z)-1,8-Di(pyren-1-yl)oct-4-ene (1) was prepared as a probe for olefin metathesis. The conversions of substrate by olefin metathesis under various conditions were calculated using the ratiometric fluorescence intensity change of 1. The conversions calculated by 1 and gas chromatography were consistent. These results show that conversions of olefin metathesis can be simply obtained from the fluorescence change of 1 and this method can be applied to the high-throughput screening (HTS) method for various olefin metathesis.

Development of a simple, effective, and practical method for (Z)-selective semihydrogenation of alkynes has been considered necessary for easy-to-access applications at organic laboratory scales. Herein, (Z)-selective semihydrogenation of alkynes was achieved using a copper nanocatalyst which was generated in situ simply by adding ammonia borane to an ethanol solution of copper sulfate. Different types of alkynes including aryl-aryl, aryl-alkyl, and aliphatic alkynes were selectively reduced to (Z)-alkenes affording up to 99% isolated yield. The semihydrogenation of terminal alkynes to alkenes and gram-scale applications were also reported. In addition to eliminating catalyst preparation, the proposed approach is simple and practical and serves as a suitable alternative method to the conventional Lindlar catalyst.

Yeast vacuoles, lysosomes, are cell organelles that have antimicrobial activity against several bacteria in vitro. Lysosomes have a potential application to the treatment of pathogens such as antibiotics in vivo. Therefore, the in vivo efficacy of lysosomes was examined in a rat infection model against pathogenic Escherichia coli with varying susceptibilities to standard antimicrobial agents. Before in vivo testing, the concentration-dependent safety of lysosomes was confirmed by blood test and histopathology of normal rats. The therapeutic efficacy of lysosomes was examined in terms of the survival of E. coli in infected rat blood. The complete blood count and histopathology results were affected by the lysosomes concentration. In addition, the E. coli growth was inhibited by the initial injection of lysosomes. These results support the use of lysosomes as a bacterial inhibitor of an infected rat model.

Background The beneficial effects of ginsenoside species have been well demonstrated in a number of studies. However, the function of ginsenoside Ro (GRo), an oleanane-type saponin, has not been sufficiently investigated. Thus, the aim of the present study was to investigate the anti-inflammatory effects of GRo in vitro using the Raw 264.7 mouse macrophage cell line treated with lipopolysaccharide (LPS), and to clarify the possible mechanism of GRo involving heme oxygenase-1 (HO-1), which itself plays a critical role in self-defense in the presence of inflammatory stress. Methods Raw 264.7 cells were pretreated with GRo (up to 200μM) for 1 h before treatment with 1 μg/mL LPS, and both cell viability and inflammatory markers involving HO-1 were evaluated. Results GRo significantly increased cell viability in a dose dependent manner following treatment with LPS, and decreased levels of reactive oxygen species and nitric oxide. GRo decreased inflammatory cytokines such as nitric oxide synthase and cyclooxygenase-2 induced by LPS. Moreover, GRo increased the expression of HO-1 in a dose dependent manner. Cotreatment of GRo with tin protoporphyrin IX, a selective inhibitor of HO-1, not only inhibited upregulation of HO-1 induced by GRo, but also reversed the anti-inflammatory effect of GRo in LPS treated Raw 264.7 cells. Conclusion GRo induces anti-inflammatory effects following treatment with LPS via upregulation of HO-1.

The Doppler phenomena caused by a moving receiver or environmental scatters around a receiver were emulated in an AC (Anechoic Chamber) and a RC (Reverberation Chamber) using platform and mode stirring. In order to verify the emulated Doppler spread spectrum, the measured results in the AC and the RC were investigated by incorporating Jakes's and 802.11 TGn Doppler models, respectively.

This paper proposes the source location estimation technique with the modulated scattering technique (MST) for indoor wireless environments. The uniform circular scatterer array (UCSA) that consist of flve optically modulated scatterers as array elements and a dipole antenna at the center of the UCSA is employed for estimating a source location from the impinging signal. In contrast with a conventional uniform circular array (UCA), the proposed method using the MST needs only one RF path. Also, the plane-wave assumption of the impinging signal is not necessary for an array signal processing because the proposed method is based on a phaseless measurement. Therefore, the proposed method can be applied in short-range LOS and NLOS environments that the plane-wave signal cannot be formed. A source location is estimated by using a simple estimation algorithm based on the power difierence of the scattering signals modulated by two scatterers on the UCSA. The power difierence is caused by difierent propagation loss between a source and each scatterer. The performance of the proposed method is demonstrated by measuring the angles of the incoming signals in the anechoic chamber and by comparing the estimated angles with the simulated results.

Two commercial PRRSV ELISA kits (IDEXX and Bionote) were evaluated for their sensitivity and specificity using 476 PRRS-positive serum samples collected from 7 animal challenge experiments and 1,000 PRRS-negative sera. Both ELISA kits exhibited 100% sensitivity with sera collected 14 to 42 days post-infection, and the results from the kits were highly correlated (R(2)=0.9207). The specificity of IDEXX or Bionote kit was 99.9% or 99.7%, respectively. In addition, the Bionote ELISA kit was used to examine 100 sera that were determined to be falsely positive either by IDEXX 2XR or 3XR ELISA, and only 7 of these samples were found to be positive. These results indicate that both ELISA kits exhibited similar levels of sensitivity and specificity and would complement one another for the verification of false-positive samples.

The prevalence of resistant genes against β-lactams in 119 Aeromonas strains was determined. A large number (99.2%) of the present fish strains were resistant to one or more β- lactams including ceftiofur, amoxicillin-clavulanic acid, ampicillin, piperacillin and cefpodoxime. Among antibiotic resistance phenotypes, the simultaneous resistance to all β-lactams occurred in 25.2% (n=30) of all strains, which consisted of 18 strains of A. dhakensis, 8 strains of A. caviae, 2 strains of A. hydrophila and only one strain of A. veronii. For exploring genetic background of the antibiotic resistances, multiple PCR assays were subjected to detect β-lactamase-encoding genes, bla(TEM), bla(OXA-B) and bla(CTX-M). In the results, the bla(TEM-1) gene was harbored in all strains, whereas only 3 strains harbored bla(OXA) gene. In the case of bla(CTX-M) gene, the gene was detected in 21.0% (25 out of 119) of all strains, which countered with 80% (20 out of 25) of A. dhakensis, 8% (2 out of 25) of A. caviae and 12% (3 out of 25) of A. hydrophila. In addition, most of the bla(CTX-M) positive strains showed simultaneous resistance to all β-lactams (18 out of 30 strains). In sequence analysis for bla(CTX-M) genes detected, they were CTX-M group 1-encoding genes including bla(CTX-M-33) from 3 eel strains of A. dhakensis. Therefore, A. dhakensis obtained from cultured fish could represent a reservoir for spreading genes encoding CTX-M group 1 enzymes and hence should be carefully monitored, especially for its potential risk to public health.

A reverberation chamber (RC) is modelled using a finite-difference time-domain (FDTD) method. To evaluate the performance, firstly, the electric field distribution and then the spatial correlation are computed inside the chamber using the FDTD method. In this work, dipole antennas operating at 750 MHz are used in transmitting and receiving mode. Empirical cumulative distribution functions obtained from FDTD simulations and measured S21 are compared with the Rayleigh distribution. The spatial correlation of the electric field inside the RC is computed from the FDTD-simulated and measured results and compared with published correlation functions.