Search

The hydrodynamic operation of the `Forest Flyer' type of explosive launching system for shock physics projectiles was investigated in detail using one- and two-dimensional continuum dynamics simulations. The simulations were insensitive to uncertainties in the material properties, and reproduced measurements of the projectile. The most commonly-used variant, with an Al alloy case, was predicted to produce a slightly curved projectile, subjected to some shock heating, and likely exhibiting some porosity from tensile damage. The flatness can be improved by using a case of lower shock impedance, such as polymethyl methacrylate. High-impedance cases, including Al alloys but with denser materials improving the launching efficiency, can be used if designed according to the physics of oblique shock reflection. The tensile stress induced in the projectile depends on the relative thickness of the explosive, expansion gap, and projectile. The thinner the projectile with respect to the explosive, the smaller the tensile stress. If the explosive is initiated with a plane wave lens, the tensile stress is lower than for initiation with multiple detonators over a plane. The previous plane wave lens designs did however induce a tensile stress close to the spall strength of the projectile. The tensile stress can be reduced by changes in the component thicknesses. Experiments to verify the operation of explosively-launched projectiles should attempt to measure porosity induced in the projectile: arrival time measurements may be insensitive to porous regions caused by damaged or recollected material.

We present a new fiber based quantum key distribution (QKD) scheme which can be regarded as a modification of an idea proposed by Inoue, Waks and Yamamoto (IWY) [1]. The scheme described here uses a single phase modulator and two differential delay elements in series at the transmitter that form an interferometer when combined with a third differential delay element at the receiver. The protocol is characterized by a high efficiency, reduced exposure to an attack by an eavesdropper, and higher sensitivity to such an attack when compared to other QKD schemes. For example, the efficiency with which transmitted data contribute to the private key is 3/4 compared with 1/4 for BB84 [2]. Moreover, an eavesdropper can aquire a maximum of 1/3 of the key which leads to an error probability in the private key of 1/3. This can be compared to 1/2 and 1/4 for these same parameters in both BB84 and IWY. The combination of these considerations should lead to increased range and key distribution rate over present fiber-based QKD schemes., Comment: 4 pages, 5 figures, 1 equation

Quantum cryptography is an emerging technology in which two parties may simultaneously generate shared, secret cryptographic key material using the transmission of quantum states of light. The security of these transmissions is based on the inviolability of the laws of quantum mechanics and information-theoretically secure post-processing methods. An adversary can neither successfully tap the quantum transmissions, nor evade detection, owing to Heisenberg's uncertainty principle. In this paper we describe the theory of quantum cryptography, and the most recent results from our experimental free-space system with which we have demonstrated for the first time the feasibility of quantum key generation over a point-to-point outdoor atmospheric path in daylight. We achieved a transmission distance of 0.5 km, which was limited only by the length of the test range. Our results provide strong evidence that cryptographic key material could be generated on demand between a ground station and a satellite (or between two satellites), allowing a satellite to be securely re-keyed on orbit. We present a feasibility analysis of surface-to-satellite quantum key generation., Comment: 12 pages, 4 figures