Search

Therapeutic microbubbles (thMBs) contain drug-filled liposomes linked to microbubbles and targeted to vascular proteins. Upon the application of a destructive ultrasound trigger, drug uptake to tumour is improved. However, the structure of thMBs currently uses powerful non-covalent bonding of biotin with avidin-based proteins to link both the liposome to the microbubble (MB) and to bind the targeting antibody to the liposome-MB complex. This linkage is not currently FDA-approved, and therefore, an alternative, maleimide-thiol linkage, that is currently used in antibody-drug conjugates was examined. In a systematic manner, vascular endothelial growth factor receptor 2 (VEGFR2)-targeted MBs and thMBs using both types of linkages were examined for their ability to specifically bind to VEGFR2 in vitro and for their ultrasound imaging properties in vivo. Both showed equivalence in the production of the thMB structure, in vitro specificity of binding and safety profiles. In vivo imaging showed subtle differences for thMBs where biotin thMBs had a faster wash-in rate than thiol thMBs, but thiol thMBs were longer-lived. The drug delivery to tumours was also equivalent, but interestingly, thiol thMBs altered the biodistribution of delivery away from the lungs and towards the liver compared to biotin thMBs, which is an improvement in biosafety.

Free-standing, 2D gold nanosheets (AuNS) offer broad potential applications from computing to biosensing and healthcare. Such applications, however, require improved control of material growth. We recently reported the synthesis of AuNS only ∼0.47 nm (two atoms) thick, which exhibited very high catalytic activity. The synthesis is a one-pot, seedless procedure in which chloroauric acid is reduced by sodium citrate in the presence of methyl orange (MO). In this study, we use spectrophotometric analysis and TEM imaging to probe AuNS formation and optimize the procedure. Previously, we suggested that MO acted as the confining agent, directing two-dimensional growth of the gold. Here, we provide the first reported analysis of the HAuCl 4 and MO reaction. We show that MO is rapidly oxidized to give 4-diazobenzenesulfonic acid, indicating that a complex interplay between HAuCl 4 , MO, and other reaction products leads to AuNS formation. Time-resolved studies indicate that synthesis time can be significantly reduced from over 12 to 2-3 h. Decreasing the reaction temperature from 20 to 4 °C improved AuNS yield by 16-fold, and the catalytic activity of the optimized material matches that obtained previously. Our elucidation of AuNS formation mechanisms has opened avenues to further improve and tune the synthesis, enhancing the potential applications of ultrathin AuNS., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

For a series of phospholipid coated calamitic nematic liquid crystal droplets (5CB, 6CB, 7CB, E7 and MLC7023) of diameter ∼18 μm, the addition of chiral dopant leaves the sign of surface anchoring unchanged. Herein we report that for these chiral nematic droplets an analyte induced transition from a Frank-Pryce structure (with planar anchoring) to a nested-cup structure (with perpendicular anchoring) is accompanied by changes in the intensity of reflected light. We propose this system as both a general scheme for understanding director fields in chiral nematic liquid crystal droplets with perpendicular anchoring and as an ideal candidate to be utilised as the basis for developing cheap, single use LC-based sensor devices., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The hydrophobicity of a drug can be a major challenge in its development and prevents the clinical translation of highly potent anti-cancer agents. We have used a lipid-based nanoemulsion termed Lipid-Oil-Nanodroplets (LONDs) for the encapsulation and in vivo delivery of the poorly bioavailable combretastatin A4 (CA4). Drug delivery with CA4 LONDs was assessed in a xenograft model of colorectal cancer. LC-MS/MS analysis revealed that CA4 LONDs, administered at a drug dose four times lower than drug control, achieved equivalent concentrations of CA4 intratumorally. We then attached CA4 LONDs to microbubbles (MBs) and targeted this construct to VEGFR2. A reduction in tumor perfusion was observed in CA4 LONDs-MBs treated tumors. A combination study with irinotecan demonstrated a greater reduction in tumor growth and perfusion (P = 0.01) compared to irinotecan alone. This study suggests that LONDs, either alone or attached to targeted MBs, have the potential to significantly enhance tumor-specific hydrophobic drug delivery., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Gold nanorods (AuNRs) have attracted a great deal of attention due to their potential for use in a wide range of biomedical applications. However, their production typically requires the use of the relatively toxic cationic surfactant cetyltrimethylammonium bromide (CTAB) leading to continued demand for protocols to detoxify them for in vivo applications. In this study, a robust and facile protocol for the displacement of CTAB from the surface of AuNRs using phospholipids is presented. After the displacement, CTAB is not detectable by NMR spectroscopy, surface-enhanced Raman spectroscopy, or using pH-dependent ζ-potential measurements. The phospholipid functionalized AuNRs demonstrated superior stability and biocompatibility (IC 50  > 200 µg mL -1 ) compared to both CTAB and polyelectrolyte functionalized AuNRs and are well tolerated in vivo. Furthermore, they have high near-infrared (NIR) absorbance and produce large amounts of heat under NIR illumination, hence such particles are well suited for plasmonic medical applications., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

We describe a modified microfluidic method for making Giant Unilamellar Vesicles (GUVs) via water/octanol-lipid/water double emulsion droplets. At a high enough lipid concentration we show that the de-wetting of the octanol from these droplets occurs spontaneously (off-chip) without the need to use shear to aid the de-wetting process. The resultant mixture of octanol droplets and GUVs can be separated by making use of the buoyancy of the octanol. A simpler microfluidic device and pump system can be employed and, because of the higher flow-rates and much higher rate of formation of the double emulsion droplets (∼1500 s-1 compared to up to ∼75 s-1), it is easier to make larger numbers of GUVs and larger volumes of solution. Because of the potential for using GUVs that incorporate lyotropic nematic liquid crystals in biosensors we have used this method to make GUVs that incorporate the nematic phases of sunset yellow and disodium chromoglycate. However, the phase behaviour of these lyotropic liquid crystals is quite sensitive to concentration and we found that there is an unexpected spread in the concentration of the contents of the GUVs obtained.

Microbubbles (MBs) are widely used as contrast enhancement agents for ultrasound imaging and have the potential to enhance therapeutic delivery to diseases such as cancer. Yet, they are only stable in solution for a few hours to days after production, which limits their potential application. Freeze-drying provides long-term storage, ease of transport, and consistency in structure and composition, thereby facilitating their use in clinical settings. Therapeutic microbubbles (thMBs) consisting of MBs with attached therapeutic payload potentially face even greater issues for production, stability, and well-defined drug delivery. The ability to freeze-dry thMBs represents an important step for their translation to the clinic. Here, we show that it is possible to freeze-dry and reconstitute thMBs that consist of lipid-coated MBs with an attached liposomal payload. The thMBs were produced microfluidically, and the liposomes contained either calcein, as a model drug, or gemcitabine. The results show that drug-loaded thMBs can be freeze-dried and stored for at least 6 months. Upon reconstitution, they maintain their structural integrity and drug loading. Furthermore, we show that their in vivo echogenicity is maintained post-freeze-drying. Depending on the gas used in the original bubbles, we also demonstrate that the approach provides a method to exchange the gas core to allow the formulation of thMBs with different gases for combination therapies or improved drug efficacy. Importantly, this work provides an important route for the facile off-site production of thMBs that can be reformulated at the point of care.

Most cancer patients receive chemotherapy at some stage of their treatment which makes improving the efficacy of cytotoxic drugs an ongoing and important goal. Despite large numbers of potent anti-cancer agents being developed, a major obstacle to clinical translation remains the inability to deliver therapeutic doses to a tumor without causing intolerable side effects. To address this problem, there has been intense interest in nanoformulations and targeted delivery to improve cancer outcomes. The aim of this work was to demonstrate how vascular endothelial growth factor receptor 2 (VEGFR2)-targeted, ultrasound-triggered delivery with therapeutic microbubbles (thMBs) could improve the therapeutic range of cytotoxic drugs. Methods: Using a microfluidic microbubble production platform, we generated thMBs comprising VEGFR2-targeted microbubbles with attached liposomal payloads for localised ultrasound-triggered delivery of irinotecan and SN38 in mouse models of colorectal cancer. Intravenous injection into tumor-bearing mice was used to examine targeting efficiency and tumor pharmacodynamics. High-frequency ultrasound and bioluminescent imaging were used to visualise microbubbles in real-time. Tandem mass spectrometry (LC-MS/MS) was used to quantitate intratumoral drug delivery and tissue biodistribution. Finally, 89 Zr PET radiotracing was used to compare biodistribution and tumor accumulation of ultrasound-triggered SN38 thMBs with VEGFR2-targeted SN38 liposomes alone. Results: ThMBs specifically bound VEGFR2 in vitro and significantly improved tumor responses to low dose irinotecan and SN38 in human colorectal cancer xenografts. An ultrasound trigger was essential to achieve the selective effects of thMBs as without it, thMBs failed to extend intratumoral drug delivery or demonstrate enhanced tumor responses. Sensitive LC-MS/MS quantification of drugs and their metabolites demonstrated that thMBs extended drug exposure in tumors but limited exposure in healthy tissues, not exposed to ultrasound, by persistent encapsulation of drug prior to elimination. 89 Zr PET radiotracing showed that the percentage injected dose in tumors achieved with thMBs was twice that of VEGFR2-targeted SN38 liposomes alone. Conclusions: thMBs provide a generic platform for the targeted, ultrasound-triggered delivery of cytotoxic drugs by enhancing tumor responses to low dose drug delivery via combined effects on circulation, tumor drug accumulation and exposure and altered metabolism in normal tissues., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

In liquid crystal (LC) droplets, small changes in surface anchoring energy can produce large changes in the director field which result in readily detectable optical effects. This makes them attractive for use as biosensors. Coating LC droplets with a phospholipid monolayer provides a bridge between the hydrophobic world of LCs and the water-based world of biology and makes it possible to incorporate naturally occurring biosensor systems. However, phospholipids promote strong perpendicular (homeotropic) anchoring that can inhibit switching of the director field. We show that the tendency for phospholipid layers to promote perpendicular anchoring can be suppressed by using synthetic phospholipids in which the acyl chains are terminated with bulky tert -butyl or ferrocenyl groups; the larger these end-group(s), the less likely the system is to be perpendicular/radial. Additionally, the droplet director field is found to be dependent on the nature of the LC, particularly its intrinsic surface properties, but not (apparently) on the sign of the dielectric anisotropy, the proximity to the melting/isotropic phase transition, the surface tension (in air), or the values of the Frank elastic constants.

The production and stability of microbubbles (MBs) is enhanced by increasing the viscosity of both the formation and storage solution, respectively. Glycerol is a good candidate for biomedical applications of MBs, since it is biocompatible, although the exact molecular mechanisms of its action is not fully understood. Here, we investigate the influence glycerol has on lipid-shelled MB properties, using a range of techniques. Population lifetime and single bubble stability were studied using optical microscopy. Bubble stiffness measured by AFM compression is compared with lipid monolayer behavior in a Langmuir-Blodgett trough. We deduce that increasing glycerol concentrations enhances stability of MB populations through a 3-fold mechanism. First, binding of glycerol to lipid headgroups in the interfacial monolayer up to 10% glycerol increases MB stiffness but has limited impact on shell resistance to gas permeation and corresponding MB lifetime. Second, increased solution viscosity above 10% glycerol slows down the kinetics of gas transfer, markedly increasing MB stability. Third, above 10%, glycerol induces water structuring around the lipid monolayer, forming a glassy layer which also increases MB stiffness and resistance to gas loss. At 30% glycerol, the glassy layer is ablated, lowering the MB stiffness, but MB stability is further augmented. Although the molecular interactions of glycerol with the lipid monolayer modulate the MB lipid shell properties, MB lifetime continually increases from 0 to 30% glycerol, indicating that its viscosity is the dominant effect on MB solution stability. This three-fold action and biocompatibility makes glycerol ideal for therapeutic MB formation and storage and gives new insight into the action of glycerol on lipid monolayers at the gas-liquid interface.

2D metal nanomaterials offer exciting prospects in terms of their properties and functions. However, the ambient aqueous synthesis of atomically-thin, 2D metallic nanomaterials represents a significant challenge. Herein, freestanding and atomically-thin gold nanosheets with a thickness of only 0.47 nm (two atomic layers thick) are synthesized via a one-step aqueous approach at 20 °C, using methyl orange as a confining agent. Owing to the high surface-area-to-volume ratio, abundance of unsaturated atoms exposed on the surface and large interfacial areas arising from their ultrathin 2D nature, the as-prepared Au nanosheets demonstrate excellent catalysis performance in the model reaction of 4-nitrophenol reduction, and remarkable peroxidase-mimicking activity, which enables a highly sensitive colorimetric sensing of H 2 O 2 with a detection limit of 0.11 × 10 -6 m. This work represents the first fabrication of freestanding 2D gold with a sub-nanometer thickness, opens up an innovative pathway toward atomically-thin metal nanomaterials that can serve as model systems for inspiring fundamental advances in materials science, and holds potential across a wide region of applications., Competing Interests: S.Y. and S.D.E. have filed a patent (Application number: 1818923.3) relating to 2D metal nanomaterials., (© 2019 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

We describe a novel biosensor based on phospholipid-coated nematic liquid crystal (LC) droplets and demonstrate the detection of Smp43, a model antimicrobial peptide (AMP) from the venom of North African scorpion Scorpio maurus palmatus. Mono-disperse lipid-coated LC droplets of diameter 16.7 ± 0.2 μm were generated using PDMS microfluidic devices with a flow-focusing configuration and were the target for AMPs. The droplets were trapped in a bespoke microfluidic trap structure and were simultaneously treated with Smp43 at gradient concentrations in six different chambers. The disruption of the lipid monolayer by the Smp43 was detected (<6 μM) at concentrations well within its biologically active range, indicated by a dramatic change in the appearance of the droplets associated with the transition from a typical radial configuration to a bipolar configuration, which is readily observed by polarizing microscopy. This suggests the system has feasibility as a drug-discovery screening tool. Further, compared to previously reported LC droplet biosensors, this LC droplet biosensor with a lipid coating is more biologically relevant and its ease of use in detecting membrane-related biological processes and interactions has the potential for development as a reliable, low-cost and disposable point of care diagnostic tool.

Four novel amino acid-functionalised triphenylenes have been prepared with glycine, l-alanine, l-phenylalanine and l-tryptophan ethyl ester side-chains. The glycine derivative is a good gelator of chloroform, the alanine derivative gels ethanol and toluene, and the phenylalanine derivative gels benzene and toluene. The tryptophan derivative does not gel any of the solvents tested, most probably due to its more bulky structure, but forms microspheres by evaporation-induced self-assembly. The self-assembly properties of the π-gelators have been investigated using infrared, UV-absorption and fluorescence spectroscopy, concentration- and temperature-dependent NMR, and X-ray scattering experiments on dried xerogel as well as the wet organogel. The latter experiments suggest the glycine gel in chloroform includes columnar aggregates, with an overall disordered columnar oblique mesophase. These compounds are of interest because of the well-known hole-transporting properties of triphenylene liquid crystals: 1-D columnar assemblies of these compounds may find applications in organic electronic devices.

Under a layer of 0.1 M HCl in isopropanol, soft ultraviolet (UV) (365 nm) photolysis of the thiol-on-gold self-assembled monolayer (SAM) derived from the lipoic acid ester of α-hydroxy-1-acetylpyrene results in the expected removal of the acetylpyrene protecting group. When photolyzing through a mask, this can be used to produce a patterned surface and, at a controlled electrochemical potential, it is then possible to selectively and reversibly electrodeposit copper on the photolyzed regions. Rather surprisingly, under these photolysis conditions, there is not only the expected photodeprotection of the ester but also partial removal of the lipoic acid layer which has been formed. In further studies, it is shown that this type of acid-catalyzed photoremoval of SAM layers by soft UV is a rather general phenomenon and results in the partial removal of the thiol-on-gold SAM layers derived from other ω-thiolated carboxylic acids. However, this phenomenon is chain-length dependent. Under conditions in which there is a ∼60% reduction in the thickness of the SAM derived from dithiobutyric acid, the SAM derived from mercaptoundecanoic acid is almost unaffected. The process by which the shorter-chain SAM layers are partially removed is not fully understood because these compounds do not absorb significantly in the 365 nm region of the spectrum! Significantly, this study shows that acid catalysis photolysis of thiol-on-gold SAMs needs to be used with caution.

A novel poly(amino acid methacrylate) brush comprising zwitterionic cysteine groups (PCysMA) was utilized as a support for lipid bilayers. The polymer brush provides a 12-nm-thick cushion between the underlying hard support and the aqueous phase. At neutral pH, the zeta potential of the PCysMA brush was ∼-10 mV. Cationic vesicles containing >25% DOTAP were found to form a homogeneous lipid bilayer, as determined by a combination of surface analytical techniques. The lipid mobility as measured by FRAP (fluorescence recovery after photobleaching) gave diffusion coefficients of ∼1.5 μm(2) s(-1), which are comparable to those observed for lipid bilayers on glass substrates.

Axial orientation of discotic columnar liquid crystals in nanopores of inorganic templates, with the columns parallel to the axis of the nanochannels, is considered desirable for applications such as production of molecular wires. Here, we evaluate experimentally the role of the rigidity of the LC columns in achieving such orientation in nanopores where the planar anchoring (i.e., columns parallel to wall surface) is enforced. We studied the columnar phase of several discotic compounds with increasing column rigidity in the following order: dendronized carbazole, hexakis(hexyloxy)triphenylene (HAT6), a 1:1 HAT6-trinitrofluorenone (TNF) complex, and a helicene derivative. Using 2-D X-ray diffraction, AFM, grazing incidence diffraction, and polarized microscopy, we observed that the orientation of the columns changes from circular concentric to axial with increasing column rigidity. Additionally, when the rigidity is borderline, increasing pore diameter can change the configuration from axial back to circular. We derive expressions for distortion free energy that suggest that the orientation is determined by the competition between, on the one hand, the distortion energy of the 2-d lattice and the mismatch of its crystallographic facets with the curved pore wall in the axial orientation and, on the other hand, the bend energy of the columns in the circular configuration. Furthermore, the highly detailed AFM images of the core of the disclinations of strength +1 and +1/2 in the center of the pore reveal that the columns spiral down to the very center of the disclination and that there is no amorphous or misaligned region at the core, as suggested previously.

By forming lipid bilayers within SU8 patterns, between interdigitated electrodes, we have demonstrated that it is possible to manipulate charged membrane components using low applied voltages over relatively short time scales. Two distinct patterns were studied: a nested "fish trap" which served as a molecular trap, and a diffusion aided Brownian ratchet which operated as a molecular pump. By reducing the size of the structures we have demonstrated that large applied fields (>200 V/cm) can be achieved on-chip, using low applied potentials (<13 V). By using ac fields applied orthogonal to the direction of desired motion, the molecular pumps provide a voltage independent method for moving charged components within lipid membranes over large distances. The reduced scale of the trap structures compared to those previously used in our laboratory has led to over a 10-fold decrease in the operational time require for charge build-up, from 16 h down to 1.5 h. The observed benefits of scaling means that these systems should be suitable for the on-chip separation and manipulation of charged species within supported lipid membranes.

It has been shown that the base-initiated cyclo-oligomerisation of phthalonitriles is favoured by bulky α-substituents making it possible to obtain the metal-free phthalocyanine directly and in high yield. The phthalocyanine with eight α-isoheptyl substituents gives a high time-of-flight hole mobility of 0.14 cm(2)·V(-1)·s(-1) within the temperature range of the columnar hexagonal phase, that is 169-189 °C.

Membrane proteins are key components of the plasma membrane and are responsible for control of chemical ionic gradients, metabolite and nutrient transfer, and signal transduction between the interior of cells and the external environment. Of the genes in the human genome, 30% code for membrane proteins (Krogh et al. J. Mol. Biol.2001, 305, 567). Furthermore, many FDA-approved drugs target such proteins (Overington et al. Nat. Rev. Drug Discovery 2006, 5, 993). However, the structure-function relationships of these are notably sparse because of difficulties in their purification and handling outside of their membranous environment. Methods that permit the manipulation of membrane components while they are still in the membrane would find widespread application in separation, purification, and eventual structure-function determination of these species (Poo et al. Nature 1977, 265, 602). Here we show that asymmetrically patterned supported lipid bilayers in combination with AC electric fields can lead to efficient manipulation of charged components. We demonstrate the concentration and trapping of such components through the use of a "nested trap" and show that this method is capable of yielding an approximately 30-fold increase in the average protein concentration. Upon removal of the field, the material remains trapped for several hours as a result of topographically restricted diffusion. Our results indicate that this method can be used for concentrating and trapping charged membrane components while they are still within their membranous environment. We anticipate that our approach could find widespread application in the manipulation and study of membrane proteins., (© 2011 American Chemical Society)

We report on the development of novel cyano-biphenyl-based thiolate self-assembled monolayers designed to promote homeotropic alignment of calamitic liquid crystals. The molecules developed contain an ortho-nitrobenzyl protected carboxylic acid group that on irradiation by soft UV (365 nm) is cleaved to yield carboxylic acid groups exposed at the surface that promote planar alignment. Using a combination of wetting, X-ray photoelectron spectroscopy, Fourier transform-infrared reflection absorption spectroscopy, and ellipsometry we show that high photolysis yields (>90%) can be achieved and that the patterned SAMs are suitable for the controlled alignment of calamitic liquid crystals. This study further shows that such photo-patterned SAMs can be used to control the formation of focal conic domains (FCDs) in the smectic-A phase in terms of positioning and size confinement on surfaces.

An assay has been developed in which the activity of an ubiquinol oxidase from Escherichia coli, cytochrome bo(3) (cbo(3)), is determined as a function of the hydrophobic substrate ubiquinol-10 (UQ-10) in tethered bilayer lipid membranes (tBLMs). UQ-10 was added in situ, while the enzyme activity and the UQ-10 concentration in the membrane have been determined by cyclic voltammetry. Cbo(3) is inhibited by UQ-10 at concentrations above 5-10 pmol/cm(2), while product inhibition is absent. Cyclic voltammetry has also been used to characterise the effects of three inhibitors; cyanide, inhibiting oxygen reduction; 2-n-Heptyl-4-hydroxyquinoline N-oxide (HQNO), inhibiting the quinone oxidation and Zn(II), thought to block the proton channels required for oxygen reduction and proton pumping activity. The electrochemical behaviour of cbo(3) inhibited with HQNO and Zn(II) is almost identical, suggesting that Zn(II) ions inhibit the enzyme reduction by quinol, rather than oxygen reduction. This suggests that at Zn(II) concentration below 50µM the proton release of cbo(3) is inhibited, but not the proton uptake required to reduce oxygen to water., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Tethered bilayer lipid membranes (tBLM) are formed on 1) pure tether lipid triethyleneoxythiol cholesterol (EO(3)C) or on 2) mixed self-assembled monolayers (SAMs) of EO(3)C and 6-mercaptohexanol (6MH). While EO(3)C is required to form a tBLM with high resistivity, 6MH dilutes the cholesterol content in the lower leaflet of the bilayer forming ionic reservoirs required for submembrane hydration. Here we show that these ionic reservoirs are required for ion transport through gramicidin or valinomycin, most likely due to the thermodynamic requirements of ions to be solvated once transported through the membrane. Unexpectedly, electrochemical impedance spectroscopy (EIS) shows an increase of capacitance upon addition of gramicidin, while addition of valinomycin decreases the membrane resistance in the presence of K(+) ions. We hypothesise that this is due to previously reported phase separation of EO(3)C and 6MH on the surface. This results in ionic reservoirs on the nanometre scale, which are not fully accounted for by the equivalent circuits used to describe the system.

We studied the anchoring of 6CB on a series of self-assembled monolayers (SAMs) with a functional group that mimics that of the nematic liquid crystal (LC). The SAMs were first characterized by wetting, Fourier-transform infrared spectroscopy, and surface potential measurements. We found that, in two of these SAMs, the end group dipoles were oriented close to the normal of the surface and that these promoted homeotropic anchoring. In the case of the other SAM, the dipole was oriented parallel to the surface, and planar anchoring was obtained. Raman scattering by adsorbates on thin metal films is enhanced by the electromagnetic fields of surface plasmon polaritons (SPPs). Despite the inherent polarization of SPPs, there have been few reports in which SPP Raman scattering has been used to study molecular orientation. We have developed optical instrumentation to provide efficient excitation and collection of SPP Raman scattered light using attenuated total reflection geometry. The Kretschmann prism coupling configuration was used to excite SPPs on thin (500 A) gold films with adsorbed SAMs of alkanethiols in contact with thin films (50 microm) of the nematic liquid crystal 4'-hexylbiphenyl-4-carbonitrile (6CB, Merck). The anchoring and orientational wetting of the LC 6CB at the interface with omega-functionalized SAMs was studied using this arrangement. In agreement with the results of previous studies, a high-energy surface (-COOH) was found to promote planar anchoring, whereas a low-energy surface (-CF(3)) was found to induce homeotropic anchoring.

Surfing gold and silica! A new cholesterol-based tether was attached to both amine-functionalised silica and gold surfaces. The resultant self-assembled monolayers, which can be deep-UV-patterned, were used in attaching essentially equivalent patterned supported lipid bilayers both on silica for fluorescence studies (left figure) and on gold for impedance studies (right figure).We report a new cholesterol-based self-assembled monolayer (SAM) for use in attaching lipid membranes to both gold and silica surfaces that can be patterned by deep UV (254 nm) photolysis. It allows essentially equivalent patterned supported bilayers to be created both on gold for impedance studies and on silica for fluorescence studies. On either surface an amine-functionalised SAM is reacted with an N-hydroxysuccinimidylcarbonyl-functionalised EO3-cholesteryl derivative. The formation of the amine-functionalised SAM and its reaction with the EO3-cholesteryl derivative were followed by contact-angle measurements, ellipsometry and X-ray photoelectron spectroscopy. The resultant layer of cholesterol tethers was patterned by deep UV photolysis, which regenerates the original SiO(2) surface in exposed regions on a silica substrate and oxidises thiol groups on a gold substrate. This patterned surface containing hydrophilic SiO(2) (or -OH groups) and hydrophobic cholesterol tether regions can be converted to a surface patterned with supported lipid bi- and monolayers (respectively) by immersing in a solution of small unilamellar vesicles of egg yolk phosphatidycholine. The formation of the lipid bi- and monolayer regions on the silica surface was evidenced by fluorescence microscopy. Crucially the bilayer regions remain fully fluid yielding lipid mobilities comparable to those found in physisorbed bilayers. Furthermore charged fluorescent lipids are shown to migrate in an applied field thus providing a platform for the studying the electrophoresis (potentially) for a wide range of charged membrane components, such as membrane proteins. The formation of the patterned lipid membrane on the gold surface was confirmed by electrochemical impedance measurements.

This work demonstrates the use of deep UV micropatterned chlorotrimethylsilane (TMS) monolayers to support lipid membranes on SiO(2) surfaces. After immersing such a patterned surface into a solution containing small unilamellar vesicles of egg PC, supported bilayer lipid membranes were formed on the hydrophilic, photolyzed regions and lipid monolayer over the hydrophobic, non-photolyzed regions. A barrier between the lipid monolayer and bilayer regions served to stop charged lipids migrating between the two. This allows the system to be used to separate charged lipids or proteins by electrophoresis. Either oppositely charged fluorescence labeled lipids [Texas Red DHPE (negative charge) and D291 (positive charge)] or lipids with different charge numbers [Texas Red DHPE (one negative charge) and NBD PS (two negative charges)] can be separated. We have also studied the migration of streptavidin attached to a biotinylated lipid. Negatively charged streptavidin responds to the applied electric field by moving in the direction of electroosmotic flow, i.e. towards the negative electrode. However the direction of streptavidin movement can be controlled by altering the difference in zeta potential between that of the streptavidin (zeta(1)) and the lipid membrane (zeta(2)). If zeta(1) > zeta(2), streptavidin moves to the negative electrode, while if zeta(1) < zeta(2), streptavidin moves to the positive electrode. This balance was manipulated by adding positively charged lipid DOTAP to the membrane. After measuring the average drift velocity of streptavidin as a function of DOTAP concentration, the point where zeta(1) approximately zeta(2) was found. At this point zeta(1) was calculated to be -9.8 mV which is in good agreement with the value of -13 mV from force measurements and corresponds to a charge of -2e per streptavidin, thus demonstrating the applicability of this method for determining protein charge.

We have developed a simple native-like surface-tethered membrane system to investigate the activity of cbo(3) (cytochrome bo(3)), a terminal oxidase in Escherichia coli. The tethered membranes consist of E. coli inner-membrane extracts mixed with additional E. coli lipids containing various amounts of the cbo(3) substrate UQ-10 (ubiquinol-10). Tethered membranes are formed by self-assembly from vesicles on to gold electrodes functionalized with cholesterol derivatives. cbo(3) activity was monitored using CV (cyclic voltammetry) with electron transfer to cbo(3) mediated by UQ-10. The apparent K(m) for oxygen with this system is 1.1+/-0.4 microM, in good agreement with values reported in the literature for whole-cell experiments and for purified cbo(3). Increasing the concentration of lipophilic UQ-10 in the membrane leads to an increase in cbo(3) activity. The activity of cbo(3) with long-chain ubiquinones appears to be different from previous reports using short-chain substrate analogues such as UQ-1 in that typical Michaelis-Menten kinetics are not observed using UQ-10. This native-like membrane model thus provides new insights into the interaction of transmembrane enzymes with hydrophobic substrates which contrasts with studies using hydrophilic UQ analogues.

The inner membrane of Escherichia coli, overexpressing an ubiquinol oxidase, cytochrome bo3 (cbo3), was "tethered" in a planar configuration to a gold electrode. Electron transfer to cbo3 was achieved via native ubiquinol-8 or added ubiquinol-10, and impedance spectroscopy was used to characterize the diffusion properties of the ubiquinol/ubiquinone in the tethered membrane system. Spectra were obtained at varying direct current (DC) potentials covering the potential window in which the voltammetric catalytic wave of cbo3 is visible. These spectra were compared to those obtained after addition of a potent inhibitor of cbo3, cyanide, and the difference in impedance was analyzed using a derived equivalent circuit, which is similar to that of open finite-length diffusion (OFLD) or the finite Warburg circuit, but with the boundary conditions modified to account for the fact that ubiquinol reoxidation is limited by enzyme activity. Analysis of the impedance spectra of the tethered membrane system gave kinetic parameters that are consistent with values obtained using cyclic voltammetry. Importantly, the diffusion rate of ubiquinone (10(-13)-10(-12) cm2/s) was found to be orders of magnitude lower than accepted values for lateral diffusion (10(-8)-10(-7) cm2/ s). It is hypothesized that this result represent perpendicular diffusion of quinone across the membrane, corresponding to a "flip" time between 0.05 and 1 s.

Preferential binding of F-actin to lipid bilayers containing ponticulin was investigated on both planar supported bilayers and on a cholesterol-based tethering system. The transmembrane protein ponticulin in Dictyostelium discoideum is known to provide a direct link between the actin cytoskeleton and the cell membrane ( Wuestehube, L. J. ; Luna, E. J. J. Cell Biol. 1987, 105, 1741- 1751 ). Purification of ponticulin has allowed an in vitro model of the F-actin cytoskeletal scaffold system to be formed and investigated by AFM, epi-fluorescence microscopy, surface plasmon resonance (SPR), and quartz crystal microbalance with dissipation (QCM-D). Single filament features of F-actin bound to the ponticulin containing lipid bilayer are shown by AFM to have a pitch of 37.3 +/- 1.1 nm and a filament height of 7.0 +/- 1.6 nm. The complementary techniques of QCM-D and SPR were used to obtain dissociation constants for the interaction of F-actin with ponticulin containing bilayers, giving 10.5 +/- 1.7 microM for a physisorbed bilayer and 10.8 +/- 3.6 microM for a tethered bilayer, respectively.

Solid-supported bilayer lipid membranes (SBLMs) containing membrane protein have been generated through a simple lipid dilution technique. SBLM formation from mixtures of native Escherichia coli bacterial inner membrane (IM) vesicles diluted with egg phosphatidylcholine (egg PC) vesicles has been explored with dissipation enhanced quartz crystal microbalance (QCM-D), atomic force microscopy (AFM), attenuated total internal-reflection Fourier-transform infrared spectroscopy (ATR-FTIR), and fluorescence recovery after photobleaching (FRAP). QCM-D studies reveal that SBLM formation from vesicle mixtures ranging between 0% and 100% IM can be divided into two regimes. Samples with < or = 40% IM form SBLMs, while samples of greater IM fractions are dominated by vesicle adsorption. FRAP experiments showed that the bilayers formed from mixed vesicles with < or = 40% IM were fluid, and comprised a mixture of both egg PC and IM. ATR-FTIR measurements on SBLMs membranes formed with 30% IM confirm that protein is present. SBLM formation was also explored as a function of temperature by QCM-D and FRAP. For samples of 30% IM, QCM-D data show a decreased mass and viscoelasticity at elevated temperatures, and an increased fluidity is observed by FRAP measurements. These results suggest improved biomimetic characteristics can be obtained by forming and maintaining the system at, or close to, 37 degrees C.

Pore-suspending membranes on porous alumina substrates with pore diameters of 60 nm were prepared by fusion of vesicles on a (cholesterylpolyethylenoxy)thiol-functionalized surface, and their functionality demonstrated by the activity of the proton pump bacteriorhodopsin.

The formation of tethered lipid bilayer membranes (tBLMs) from unilamelar vesicles of egg yolk phosphatidylcholine (EggPC) on mixed self-assembled monolayers (SAMs) from varying ratios of 6-mercaptohexanol and EO(3)Cholesteryl on gold has been monitored by simultaneous attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and electrochemical impedance spectroscopy (EIS). The influence of the lipid orientation (and hence the anisotropy) of lipids on a gold film on the dichroic ratio was studied by simulations of spectra with a matrix method for anisotropic layers. It is shown that for certain tilt angles of the dielectric tensor of the adsorbed anisotropic layer dispersive and negative absorption bands are possible. The experimental data indicate that the structure of the assemblies obtained varies with varying SAM composition. On SAMs with a high content of EO(3)Cholesteryl, tBLMs with reduced fluidity are formed. For SAMs with a high content of 6-mercaptohexanol, the results are consistent with the adsorption of flattened vesicles, and spherical vesicles have been found in a small range of surface compositions. The kinetics of the adsorption process is consistent with the assumption of spherical vesicles as long-living intermediates for surfaces of a high 6-mercaptohexanol content. No long-living spherical vesicles have been detected for surfaces with a large fraction of EO(3)Cholesteryl tethers. The observed differences between the surfaces suggest that for the formation of tBLMs (unlike supported BLMs) no critical surface coverage of vesicles is needed prior to lipid bilayer formation.

We introduce a new method for forming tethered bilayer lipid membranes on surfaces patterned using a photocleavable self-assembled monolayer (SAM). A SAM terminated with a hydrophobic fluorocarbon residue was bound to a gold surface through a link containing a photocleavable ortho-nitrobenzyl moiety. Hydrophilic regions were produced by irradiation with soft UV (365 nm) through a photomask. The patterned surface was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. Tethered bilayer lipid membranes with well-defined bilayer and monolayer regions were then formed by exposure to egg PC vesicles. The membranes had resistance and capacitance values of 0.52 MOmega.cm2 and 0.83 microF.cm-2, respectively.

Colloidal probe atomic force microscopy (AFM) was used to study the interaction between a surface bearing tethered cholesterol groups and an egg phosphatidylcholine (egg-PC) monolayer. The cholesterol bearing surface was comprised of a mixed self-assembled monolayer comprised of O-cholesteryl N-(8'-mecapto-3',6'-dioxaoctyl)carbamate (CPEO3) molecules and beta-mercaptoethanol formed on a 20 mum diameter gold-coated silica particle. The egg-PC monolayer was adsorbed onto an octadecylthiol monolayer formed on template-stripped gold. The force between the surfaces, as a function of separation, was measured for surface concentrations of CPEO3 from 0 to 100 mol %. At all concentrations there was a long-range repulsive double-layer force due to weak surface charges. At surface concentrations of CPEO3 from 1 to 29 mol % the interaction on the approach of the surfaces showed a maximum in the repulsive force, followed by a small (2-5 nm) jump into a force minimum corresponding to adhesion of the surfaces. On separation, a normalized pull-off force of 1.0-1.6 mN m(-1) was measured. Over the same concentration range, the calculated interaction energy per CPEO3 molecule decreased from 1.1 +/- 0.2 kT to 0.04 kT. At surface concentrations of 35 mol % and above there was no reproducible adhesion between the cholesterol-bearing surface and the phospholipid monolayer. We attribute the occurrence of short-range attraction and adhesion in the 1-29 mol % regime to the insertion of (some) cholesterol groups into the phospholipid monolayer. At higher surface concentrations the efficiency of insertion is reduced due to steric effects. We discuss the experimental results in the light of the energetics of the insertion of a cholesterol molecule into a lipid bilayer.

This work demonstrates the use of photocleavable cholesterol derivatives to create supported bilayer lipid membrane arrays on silica. The photocleavable cholesteryl tether is attached to the surface by using the reaction of an amine-functionalized self-assembled monolayer (SAM) and the N-hydroxysuccinimide-based reagent 9. The resultant SAM contains an ortho-nitrobenzyl residue that can be cleaved by photolysis by using soft (365 nm) UV light regenerating the original amine surface, and which can be patterned using a mask. The photoreaction yield was approximately 75 % which was significantly higher than previously found for related ortho-nitrobenzyl photochemistry on gold substrates. The SAMs were characterized by means of contact angle measurements, ellipsometry and X-ray photoelectron spectroscopy. Patterned surfaces were characterized with SEM and AFM. After immersing the patterned surface into a solution containing small unilamellar vesicles of egg phosphatidylcholine (PC), supported lipid membranes were formed comprised of lipid bilayer over the amine functionalized "hydrophilic" regions and lipid monolayer over the cholesteryl "hydrophobic" regions. This was confirmed by fluorescence microscopy and AFM. FRAP studies yielded a lateral diffusion coefficient for the probe molecule of 0.14+/-0.05 microm(2) s(-1) in the bilayer regions and approximately 0.01 microm(2) s(-1) in the monolayer regions. This order of magnitude difference in diffusion coefficients effectively serves to isolate the bilayer regions from one another, thus creating a bilayer array.

We report thiol-on-gold self-assembled monolayers (SAMs) that can be photodeprotected using soft UV irradiation (lambda = 365 nm) to yield CO(2)H functionalized surfaces complementing those reported previously, which yielded NH(2) functionalized surfaces. The photolysis of these SAMs were monitored using a combination of surface sensitive techniques. In the SAM environment the photodeprotection yields are lower than those obtained for equivalent reactions in dilute solution. The protected carboxylic acids SAMs are shown to have a low yield approximately 50% due to competing photoreduction reactions of the nitro group. The results from infrared studies show that, as the photolysis progresses, the long chain protected residues reorganize and shield the functional COOH groups, thereby reducing the hydrophilic character of the surface.

An electrode surface is presented that enables the characterization of redox-active membrane enzymes in a native-like environment. An ubiquinol oxidase from Escherichia coli, cytochrome bo(3) (cbo(3)), has been co-immobilized into tethered bilayer lipid membranes (tBLMs). The tBLM is formed on gold surfaces functionalized with cholesterol tethers which insert into the lower leaflet of the membrane. The planar membrane architecture is formed by self-assembly of proteoliposomes, and its structure is characterized by surface plasmon resonance (SPR), electrochemical impedance spectroscopy (EIS), and tapping-mode atomic force microscopy (TM-AFM). The functionality of cbo(3) is investigated by cyclic voltammetry (CV) and is confirmed by the catalytic reduction of oxygen. Interfacial electron transfer to cbo(3) is mediated by the membrane-localized ubiquinol-8, the physiological electron donor of cbo(3). Enzyme coverages observed with TM-AFM and CV coincide (2-8.5 fmol.cm(-)(2)), indicating that most-if not all-cbo(3) on the surface is catalytically active and thus retains its integrity during immobilization.

Surface modification using light is one of the most powerful methods for controlling the physical and chemical properties offunctionalized surfaces. In this paper, we report on systems where soft UV irradiation (lambda = 365 nm) converts a "low" activity fluorocarbon to a "high" activity amine-functionalized surface. An amine-functionalized SAM (self-assembled monolayer) is first masked using a tertiary amine catalyzed reaction with an N-hydroxysuccinimidyl carbonyl reagent. This mild, room-temperature reaction introduces a hydrophobic photocleavable nitrobenzyl "protecting group" terminated with a fluorocarbon end-chain. UV irradiation (lambda = 365 nm) of this hydrophobic/fluorocarbon surface cleaves the nitrobenzyl residue, returning the surface to the original hydrophilic/amine-functionalized state. This provides a mild, generic method of producing surfaces with hydrophilic/hydrophobic patterns or patterned with amine functional residues. Two different protecting groups, one terminated with a single and the other with three fluorocarbon end chains, are compared. In the case of the more bulky protecting group, only a small proportion of the amine residues react, but the surface is equally hydrophobic and the amine residues equally well shielded from further reaction. Surfaces are characterized by X-ray photoelectron spectroscopy, ellipsometry, surface potential, and contact angle measurements. Images of the photopatterned SAMs were obtained using scanning electron microscopy.

A novel electrochemical approach is described for redox-active membrane proteins. A total membrane extract (in the form of vesicles) of Bacillus subtilis is tethered onto gold surfaces modified with cholesterol based thiols. The membrane vesicles remain intact on the surface and do not rupture or fuse to form a planar bilayer. Oxidation/reduction signals are obtained of the natural co-enzyme, menaquinone-7, located in the membrane. The membrane protein, succinate menaquinone oxidoreductase (SQR), remains in the vesicles and is able to reduce fumarate using menaquinone as mediator. The catalysis of the reverse reaction (oxidation of succinate), which is the natural catalytic function of SQR, is almost absent with menaquinone. However, adding the co-enzyme ubiquinone, which has a reduction potential that is about 0.2 V higher, restores the succinate oxidation activity.

This review describes various methods for the attachment of phospholipid bilayers to solid supports. The simplest approach involves vesicle unrolling onto a surface that has been previously modified with a continuous self-assembled monolayer (SAM). The choice of a suitable SAM can lead to the formation of attached bilayers that have the desired biomimetic properties and are suitable for studying transmembrane proteins. However, there are intrinsic problems associated with this approach if one is interested in studying ion transport phenomena. In particular, the relatively low resistance values found for such bilayers do not permit studies of single ion channels. For such studies to be carried out the background leakage through the lipid film must be greatly reduced. In an attempt to reduce the problems of leakage we have formed patterned SAMs in which a blocking, hydrophobic, layer covers 90% of the electrode surface. The remaining portion of the surface, which is hydrophilic, supports the formation of a bilayer. This approach has led to an improvement in the quality of the bilayers formed but has still not provided bilayers with sufficiently high specific resistances to study single ion channels. Finally, we describe new approaches based on the formation of bilayers suspended over small apertures. These 'suspended' bilayers are similar in structure to those used in black lipid membrane experiments and give rise to highly blocking bilayer membranes. Unfortunately, this approach requires the use of solvents to create the suspended bilayer and they are relatively fragile.

Derivatives of the sodium salt of dimyristoylphosphatidylinositol (DMPI) have been synthesized specifically deuterated in the headgroup. A 50:50 (molar) mixture of DMPI with dimyristoylphosphatidylcholine (DMPC) hydrated to the level of 16 waters/lipid gives a biomembrane-like Lalpha phase at 50 degrees C. Comparison of the neutron diffraction scattering profiles for deuterated and undeuterated membranes allowed the depth of each deuterium (hydrogen) within the bilayer to be determined to +/-0.5 A. This gave the orientation of the inositol ring which lies more-or-less along the bilayer normal projecting directly out into the water. This orientation is similar to that of the sugar residue in glycolipids and confirms previous models for PI. On the assumption that the (P)O-DAG bond is more-or-less parallel to the bilayer normal, it is consistent with a roughly trans, trans, trans, gauche- conformation for the glyceryl-phosphate-inositol link. In the case of DMPI, it is the C4-hydroxy group which is most fully extended into the water layer, but when this is phosphorylated, the inositol ring turns over and tilts so that the C5-hydroxy group is now the one furthest extended into the water layer. Hence, at each stage in the pathway PI --> PI-4P --> PI-4,5-P2, it is the hydroxy position most exposed to the water which undergoes phosphorylation. Whereas the orientation of the inositol ring in DMPI can be seen simply as maximizing its hydration, the tilt of the ring in DMPI-4P cannot be explained in this way. It is suggested that it is due to an electrostatic interaction.