Search

Non-equilibrium Monte Carlo simulations based on Jarzynski's equality are a well-understood method to compute differences in free energy and also to sample from a target probability distribution without the need to thermalize the system under study. In each evolution, the system starts from a given base distribution at equilibrium and it is gradually driven out-of-equilibrium while evolving towards the target parameters. If the target distribution suffers from long autocorrelation times, this approach represents a promising candidate to mitigate critical slowing down. Out-of-equilibrium evolutions are conceptually similar to Normalizing Flows and they can be combined into a recently-developed architecture called Stochastic Normalizing Flows (SNFs). In this contribution we first focus on the promising scaling with the volume guaranteed by the purely stochastic approach in the $\mathrm{SU}(3)$ lattice gauge theory in 4 dimensions; then, we define an SNF by introducing gauge-equivariant layers between the out-of-equilibrium Monte Carlo updates, and we analyse the improvement obtained as well as the inherited scaling with the volume. Finally, we discuss how this approach can be systematically improved and how simulations of lattice gauge theories in four dimensions for large volumes and close to criticality can be realistically achieved., Comment: 1+8 pages, 6 figures, contribution for the 41st International Symposium on Lattice Field Theory (Lattice 2024), 28 July - 3 August 2024, Liverpool, UK; v2: 1+9 pages, 6 figures, reference added

The Compton Spectrometer and Imager (COSI) is an upcoming NASA Small Explorer satellite mission scheduled for launch in 2027 and designed to conduct an all-sky survey in the energy range of 0.2-5 MeV. Its instrument consists of an array of germanium detectors surrounded on four sides and underneath by active shields that work as anticoincidence system (ACS) to reduce the contribution of background events in the detectors. These shields are composed of bismuth germanium oxide (BGO), a scintillator material, coupled with Silicon photomultipliers, aimed to collect optical photons produced from interaction of ionizing particles in the BGO and convert them into an electric signal. The reference simulation framework for COSI is MEGAlib, a set of software tools based on the Geant4 toolkit. The interaction point of the incoming radiation, the design of the ACS modules and the BGO surface treatment change the light collection and the overall shielding accuracy. The use of the Geant4 optical physics library, with the simulation of the scintillation process, is mandatory for a more realistic evaluation of the ACS performances. However, including the optical processes in MEGAlib would dramatically increase the computing time of the COSI simulations. We propose the use of a response function encoding the energy resolution and 3D light yield correction based on a separate Geant4 simulation of the ACS that includes the full optical interaction. We present the verification of the Geant4 optical physics library against analytical computations and available laboratory measurements obtained using PMTs as readout device, as a preparatory phase for the simulation of the COSI ACS response., Comment: Proceedings Volume 13093, Space Telescopes and Instrumentation 2024: Ultraviolet to Gamma Ray, Yokohama, Japan

The study of entanglement in gauge theories is expected to provide insights into many fundamental phenomena, including confinement. However, calculations of quantities related to entanglement in gauge theories are limited by ambiguities that stem from the non-factorizability of the Hilbert space. In this work we study lattice gauge theories that admit a dual description in terms of spin models, for which the replica trick and R\'enyi entropies are well defined. In the first part of this work, we explicitly perform the duality transformation in a replica geometry, deriving the structure of a replica space for a gauge theory. Then, in the second part, we calculate, by means of Monte Carlo simulations, the entropic c-function of the $\Z_2$ gauge theory in three spacetime dimensions, exploiting its dual description in terms of the three-dimensional Ising model., Comment: 23+18 pages; v2: added references, matches pubished version

The detection of gravitational waves from a binary neutron star merger by Advanced LIGO and Advanced Virgo (GW170817), along with the discovery of the electromagnetic counterparts of this gravitational wave event, ushered in a new era of multimessenger astronomy, providing the first direct evidence that BNS mergers are progenitors of short gamma-ray bursts (GRBs). Such events may also produce very-high-energy (VHE, > 100GeV) photons which have yet to be detected in coincidence with a gravitational wave signal. The Cherenkov Telescope Array (CTA) is a next-generation VHE observatory which aims to be indispensable in this search, with an unparalleled sensitivity and ability to slew anywhere on the sky within a few tens of seconds. New observing modes and follow-up strategies are being developed for CTA to rapidly cover localization areas of gravitational wave events that are typically larger than the CTA field of view. This work will evaluate and provide estimations on the expected number of of gravitational wave events that will be observable with CTA, considering both on- and off-axis emission. In addition, we will present and discuss the prospects of potential follow-up strategies with CTA., Comment: Presented at the 38th International Cosmic Ray Conference (ICRC 2023), 2023 (arXiv:2309.08219)

Entanglement entropy encodes important features of strongly interacting quantum many-body systems and gauge theories, but its analytical study is still limited to systems with high level of symmetry. This motivates the search for efficient techniques to investigate this quantity numerically, through Monte Carlo calculations on the lattice. In this contribution, we discuss the computation of the entropic c-function by means of an algorithm based on Jarzynski's equality, which is an exact theorem from non equilibrium statistical mechanics. After presenting benchmark results for the Ising model in two dimensions, where our algorithm successfully reproduces the analytical predictions from conformal field theory, we discuss its generalization to the three-dimensional Ising model, for which we were able to extract universal terms beyond the area law. Finally we point out some future generalizations of this calculation., Comment: 7 pages, contribution for the 40th International Symposium on Lattice Field Theory (Lattice 2023), July 31st - August 4th, 2023, Fermi National Accelerator Laboratory

The Compton Spectrometer and Imager (COSI) is a NASA Small Explorer (SMEX) satellite mission in development with a planned launch in 2027. COSI is a wide-field gamma-ray telescope designed to survey the entire sky at 0.2-5 MeV. It provides imaging, spectroscopy, and polarimetry of astrophysical sources, and its germanium detectors provide excellent energy resolution for emission line measurements. Science goals for COSI include studies of 0.511 MeV emission from antimatter annihilation in the Galaxy, mapping radioactive elements from nucleosynthesis, determining emission mechanisms and source geometries with polarization measurements, and detecting and localizing multimessenger sources. The instantaneous field of view for the germanium detectors is >25% of the sky, and they are surrounded on the sides and bottom by active shields, providing background rejection as well as allowing for detection of gamma-ray bursts and other gamma-ray flares over most of the sky. In the following, we provide an overview of the COSI mission, including the science, the technical design, and the project status., Comment: 8 pages

The Compton Spectrometer and Imager (COSI) is a selected Small Explorer (SMEX) mission launching in 2027. It consists of a large field-of-view Compton telescope that will probe with increased sensitivity the under-explored MeV gamma-ray sky (0.2-5 MeV). We will present the current status of cosipy, a Python library that will perform spectral and polarization fits, image deconvolution, and all high-level analysis tasks required by COSI's broad science goals: uncovering the origin of the Galactic positrons, mapping the sites of Galactic nucleosynthesis, improving our models of the jet and emission mechanism of gamma-ray bursts (GRBs) and active galactic nuclei (AGNs), and detecting and localizing gravitational wave and neutrino sources. The cosipy library builds on the experience gained during the COSI balloon campaigns and will bring the analysis of data in the Compton regime to a modern open-source likelihood-based code, capable of performing coherent joint fits with other instruments using the Multi-Mission Maximum Likelihood framework (3ML). In this contribution, we will also discuss our plans to receive feedback from the community by having yearly software releases accompanied by publicly-available data challenges.

We report the Astrorivelatore Gamma ad Immagini LEggero (AGILE) observations of solar flares, detected by the on board anticoincidence system in the 80-200 keV energy range, from 2007 May 1st to 2022 August 31st. In more than 15 yr, AGILE detected 5003 X-ray, minute-lasting transients, compatible with a solar origin. A cross-correlation of these transients with the Geostationary Operational Environmental Satellites (GOES) official solar flare database allowed to associate an intensity class (i.e., B, C, M, or X) to 3572 of them, for which we investigated the main temporal and intensity parameters. The AGILE data clearly revealed the solar activity covering the last stages of the 23rd cycle, the whole 24th cycle, and the beginning of the current 25th cycle. In order to compare our results with other space missions operating in the high-energy range, we also analyzed the public lists of solar flares reported by RHESSI and Fermi Gamma-ray Burst Monitor. This catalog reports 1424 events not contained in the GOES official dataset, which, after statistical comparisons, are compatible with low-intensity, short-duration solar flares. Besides providing a further dataset of solar flares detected in the hard X-ray range, this study allowed to point out two main features: a longer persistence of the decay phase in the high-energy regime, with respect to the soft X-rays, and a tendency of the flare maximum to be reached earlier in the soft X-rays with respect to the hard X-rays. Both these aspects support a two-phase acceleration mechanism of electrons in the solar atmosphere., Comment: 22 pages, 10 figures

We study the entanglement entropy in lattice field theory using a simulation algorithm based on Jarzynski's theorem. We focus on the entropic c-function for the Ising model in two and in three dimensions: after validating our algorithm against known analytical results from conformal field theory in two dimensions, we present novel results for the three-dimensional case. We show that our algorithm, which is highly parallelized on graphics processing units, allows one to precisely determine the subleading corrections to the area law, which have been investigated in many recent works. Possible generalizations of this study to other strongly coupled theories are discussed., Comment: 1+33 pages; v2: typos corrected, matches published version

Gamma-Flash is an Italian project funded by the Italian Space Agency (ASI) and led by the National Institute for Astrophysics (INAF), devoted to the observation and study of high-energy phenomena, such as terrestrial gamma-ray flashes and gamma-ray glows produced in the Earth's atmosphere during thunderstorms. The project's detectors and the data acquisition and control system (DACS) are placed at the "O. Vittori" observatory on the top of Mt. Cimone (Italy). Another payload will be placed on an aircraft for observations of thunderstorms in the air. This work presents the architecture of the data acquisition and control system and the data flow., Comment: 4 pages, 1 figure, Astronomical Data Analysis Software and System XXXII (2022)

AGILE is a space mission launched in 2007 devoted to high-energy astrophysics. The AGILE Team is involved in the multi-messenger campaigns to send and receive science alerts about transient events in the shortest time possible. For this reason, the AGILE Team developed several real-time analysis pipelines to analyse data and follow-up external science alerts. However, the results obtained by these pipelines are preliminary and must be validated with manual analyses that are the bottleneck of the workflow. To speed up the scientific analysis performed by scientists, the AGILE Team developed the AGILEScience mobile application (for iOS and Android devices) that offers to the AGILE Team a password-protected section used to visualise the results of automated pipelines. We present in this contribution an improved functionality of the AGILEScience application that aims to enable the AGILE Team to execute a full scientific analysis using their mobile devices. When the analysis is completed, the system sends an email to notify the user that can visualise the results (e.g. plots, tables, and HTML pages) through the application. The possibility to perform scientific analysis from a mobile device enables the AGILE researchers to perform fast scientific analyses remotely to validate the preliminary results obtained with the automated pipelines. This workflow reduces the overall reaction time of the AGILE Team for the follow-up of transient phenomena., Comment: 4 pages, 4 figures, Astronomical Data Analysis Software and System XXXI (24-28 Ottobre 2021)

The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged)., Comment: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editing

The ASTRI Mini-Array is a project for the Cherenkov astronomy in the TeV energy range. ASTRI Mini-Array consists of nine Imaging Atmospheric Cherenkov telescopes located at the Teide Observatory (Canarias Islands). Large volumes of monitoring and logging data result from the operation of a large-scale astrophysical observatory. In the last few years, several "Big Data" technologies have been developed to deal with such volumes of data, especially in the Internet of Things (IoT) framework. We present the Monitoring, Logging, and Alarm (MLA) system for the ASTRI Mini-Array aimed at supporting the analysis of scientific data and improving the operational activities of the telescope facility. The MLA system was designed and built considering the latest software tools and concepts coming from Big Data and IoT to respond to the challenges posed by the operation of the array. A particular relevance has been given to satisfying the reliability, availability, and maintainability requirements towards all the array sub-systems and auxiliary devices. The system architecture has been designed to scale up with the number of devices to be monitored and with the number of software components to be considered in the distributed logging system.

We report the AGILE observations of GRB 220101A, which took place at the beginning of 1st January 2022 and was recognized as one of the most energetic gamma-ray bursts (GRBs) ever detected since their discovery. The AGILE satellite acquired interesting data concerning the prompt phase of this burst, providing an overall temporal and spectral description of the event in a wide energy range, from tens of keV to tens of MeV. Dividing the prompt emission into three main intervals, we notice an interesting spectral evolution, featuring a notable hardening of the spectrum in the central part of the burst. The average fluxes encountered in the different time intervals are relatively moderate, with respect to those of other remarkable bursts, and the overall fluence exhibits a quite ordinary value among the GRBs detected by MCAL. However, GRB 220101A is the second farthest event detected by AGILE, and the burst with the highest isotropic equivalent energy of the whole MCAL GRB sample, releasing E_iso=2.54x10^54 erg and exhibiting an isotropic luminosity of L_iso=2.34x10^52 erg/s (both in the 400 keV - 10 MeV energy range). We also analyzed the first 10^6 s of the afterglow phase, using the publicly available Swift XRT data, carrying out a theoretical analysis of the afterglow, based on the forward shock model. We notice that GRB 220101A is with high probability surrounded with a wind-like density medium, and that the energy carried by the initial shock shall be a fraction of the total E_iso, presumably near 50%., Comment: 16 pages, 9 figures, 4 tables

The Compton Spectrometer and Imager (COSI) is a 0.2-5 MeV Compton telescope capable of imaging, spectroscopy, and polarimetry of astrophysical sources. Such capabilities are made possible by COSI's germanium cross-strip detectors, which provide high efficiency, high resolution spectroscopy and precise 3D positioning of photon interactions. Science goals for COSI include studies of 0.511 MeV emission from antimatter annihilation in the Galaxy, mapping radioactive elements from nucleosynthesis, determining emission mechanisms and source geometries with polarization, and detecting and localizing multimessenger sources. The instantaneous field of view (FOV) for the germanium detectors is >25% of the sky, and they are surrounded on the sides and bottom by active shields, providing background rejection as well as allowing for detection of gamma-ray bursts or other gamma-ray flares over >50% of the sky. We have completed a Phase A concept study to consider COSI as a Small Explorer (SMEX) satellite mission, and here we discuss the advances COSI-SMEX provides for astrophysics in the MeV bandpass., Comment: 9 pages, 4 figures, 1 table, author affiliations provided on final page. arXiv admin note: substantial text overlap with arXiv:1908.04334

The ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) Mini-Array (MA) project is an international collaboration led by the Italian National Institute for Astrophysics (INAF). ASTRI MA is composed of nine Cherenkov telescopes operating in the energy range 1-100 TeV, and it aims to study very high-energy gamma ray astrophysics and optical intensity interferometry of bright stars. ASTRI MA is currently under construction, and will be installed at the site of the Teide Observatory in Tenerife (Spain). The hardware and software system that is responsible of monitoring and controlling all the operations carried out at the ASTRI MA site is the Supervision Control and Data Acquisition (SCADA). The LOgging UnifieD (LOUD) subsystem is one of the main components of SCADA. It provides the service responsible for collecting, filtering, exposing and storing log events collected by all the array elements (telescopes, LIDAR, devices, etc.). In this paper, we present the LOUD architecture and the software stack explicitly designed for distributed computing environments exploiting Internet of Things technologies (IoT).

The Cherenkov Telescope Array (CTA) will be the next generation ground-based observatory for very-high-energy (VHE) gamma-ray astronomy, with the deployment of tens of highly sensitive and fast-reacting Cherenkov telescopes. It will cover a wide energy range (20 GeV - 300 TeV) with unprecedented sensitivity. To maximize the scientific return, the observatory will be provided with an online software system that will perform the first analysis of scientific data in real-time. This study investigates the precision and accuracy of available science tools and analysis techniques for the short-term detection of gamma-ray sources, in terms of sky localization, detection significance and, if significant detection is achieved, a first estimation of the integral photon flux. The scope is to evaluate the feasibility of the algorithms' implementation in the real-time analysis of CTA. In this contribution we present a general overview of the methods and some of the results for the test case of the short-term detection of a gamma-ray burst afterglow, as the VHE counterpart of a gravitational wave event., Comment: Proceedings of the 37th International Cosmic Ray Conference (ICRC 2021), PoS(ICRC2021)69, 8 pages + full author list, 5 figures

The detection of electromagnetic (EM) emission following the gravitational wave (GW) event GW170817 opened the era of multi-messenger astronomy with GWs and provided the first direct evidence that at least a fraction of binary neutron star (BNS) mergers are progenitors of short Gamma-Ray Bursts (GRBs). GRBs are also expected to emit very-high energy (VHE, > 100 GeV) photons, as proven by the recent MAGIC and H.E.S.S. observations. One of the challenges for future multi-messenger observations will be the detection of such VHE emission from GRBs in association with GWs. In the next years, the Cherenkov Telescope Array (CTA) will be a key instrument for the EM follow-up of GW events in the VHE range, owing to its unprecedented sensitivity, rapid response, and capability to monitor a large sky area via scan-mode operation. We present the CTA GW follow-up program, with a focus on the searches for short GRBs possibly associated with BNS mergers. We investigate the possible observational strategies and we outline the prospects for the detection of VHE EM counterparts to transient GW events., Comment: Proceedings of the 37th International Cosmic Ray Conference (ICRC 2021); PoS (ICRC2021) 998

The Cherenkov Telescope Array (CTA) is an initiative that is currently building the largest gamma-ray ground Observatory that ever existed. A Science Alert Generation (SAG) system, part of the Array Control and Data Acquisition (ACADA) system of the CTA Observatory, analyses online the telescope data - arriving at an event rate of tens of kHz - to detect transient gamma-ray events. The SAG system also performs an online data quality analysis to assess the instruments' health during the data acquisition: this analysis is crucial to confirm good detections. A Python and a C++ software library to perform the online data quality analysis of CTA data, called rta-dq-lib, has been proposed for CTA. The Python version is dedicated to the rapid prototyping of data quality use cases. The C++ version is optimized for maximum performance. The library allows the user to define, through XML configuration files, the format of the input data and, for each data field, which quality checks must be performed and which types of aggregations and transformations must be applied. It internally translates the XML configuration into a direct acyclic computational graph that encodes the dependencies of the computational tasks to be performed. This model allows the library to easily take advantage of parallelization at the thread level and the overall flexibility allow us to develop generic data quality analysis pipelines that could also be reused in other applications.

The energy range between about 100 keV and 1 GeV is of interest for a vast class of astrophysical topics. In particular, (1) it is the missing ingredient for understanding extreme processes in the multi-messenger era; (2) it allows localizing cosmic-ray interactions with background material and radiation in the Universe, and spotting the reprocessing of these particles; (3) last but not least, gamma-ray emission lines trace the formation of elements in the Galaxy and beyond. In addition, studying the still largely unexplored MeV domain of astronomy would provide for a rich observatory science, including the study of compact objects, solar- and Earth-science, as well as fundamental physics. The technological development of silicon microstrip detectors makes it possible now to detect MeV photons in space with high efficiency and low background. During the last decade, a concept of detector ("ASTROGAM") has been proposed to fulfil these goals, based on a silicon hodoscope, a 3D position-sensitive calorimeter, and an anticoincidence detector. In this paper we stress the importance of a medium size (M-class) space mission, dubbed "ASTROMEV", to fulfil these objectives., Comment: White Paper for the Voyage 2050 Program by ESA. Accepted for publication in "Experimental Astronomy". arXiv admin note: text overlap with arXiv:1711.01265

The birth of gravitational-wave / electromagnetic astronomy was heralded by the joint observation of gravitational waves (GWs) from a binary neutron star (BNS) merger by Advanced LIGO and Advanced Virgo, GW170817, and of gamma-rays from the short gamma-ray burst GRB170817A by the Fermi Gamma-ray Burst Monitor (GBM) and INTEGRAL. This detection provided the first direct evidence that at least a fraction of BNSs are progenitors of short GRBs. GRBs are now also known to emit very-high-energy (VHE, > 100 GeV) photons as has been shown by recent independent detections of the GRBs 1901114C and 180720B by the ground-based gamma-ray detectors MAGIC and H.E.S.S. In the next years, the Cherenkov Telescope Array (CTA) will boost the searches for VHE counterparts thanks to its unprecedented sensitivity, rapid response and capability to monitor large sky areas via survey-mode operation. In this contribution, we present the CTA program of observations following the detection of GW events. We discuss various follow-up strategies and links to multi-wavelength and multi-messenger observations. Finally we outline the capabilities and prospects of detecting VHE emission from GW counterparts.

The Cherenkov Telescope Array (CTA) will be able to perform unprecedented observations of the transient very high-energy sky. An on-line science alert generation (SAG) pipeline, with a required 30 second latency, will allow the discovery or follow-up of gamma ray bursts (GRBs) and flaring emission from active galactic nuclei, galactic compact objects and electromagnetic counterparts of gravitational waves or neutrino messengers. The CTA sensitivity for very short exposures does not only depend on the technological performance of the array (e.g. effective area, background discrimination efficiency). The algorithms to evaluate the significance of the detection also define the sensitivity, together with their computational efficiency in order to satisfy the SAG latency requirements. We explore the aperture photometry and likelihood analysis techniques, and the associated parameters (e.g. on-source to off-source exposure ratio, minimum number of required signal events), defining the CTA ability to detect a significant signal at short exposures. The resulting CTA differential flux sensitivity as a function of the observing time, obtained using the latest Monte Carlo simulations, is compared to the sensitivities of Fermi-LAT and current-generation IACTs obtained in the overlapping energy ranges., Comment: Proceedings of the 36th International Cosmic Ray Conference - Madison, WI, USA (PoS(ICRC2019)673)

Both the interplanetary space and the Earth magnetosphere are populated by low energy ($\leq300$ keV) protons that are potentially able to scatter on the reflecting surface of Wolter-I optics of X-ray focusing telescopes and reach the focal plane. This phenomenon, depending on the X-ray instrumentation, can dramatically increase the background level, reducing the sensitivity or, in the most extreme cases, compromising the observation itself. The use of a magnetic diverter, deflecting protons away from the field of view, requires a detailed characterization of their angular and energy distribution when exiting the mirror. We present the first end-to-end Geant4 simulation of proton scattering by X-ray optics and the consequent interaction with the diverter field and the X-ray detector assembly, selecting the ATHENA Wide Field Imager as a case study for the evaluation of the residual soft proton induced background. We obtain that, in absence of a magnetic diverter, protons are indeed funneled towards the focal plane, with a focused Non X-ray Background well above the level required by ATHENA science objectives ($5\times10^{-4}$ counts cm$^{-2}$ s$^{-1}$ keV$^{-1}$), for all the plasma regimes encountered in both L1 and L2 orbits. These results set the proton diverter as a mandatory shielding system on board the ATHENA mission and all high throughput X-ray telescopes operating in the interplanetary space. For a magnetic field computed to deflect 99\% of the protons that would otherwise reach the WFI, Geant4 simulations show that this configuration, in the assumption of a uniform field, would efficiently shield the focal plane, yielding a residual background level of the order or below the requirement., Comment: Accepted for publication on The Astrophysical Journal on 28/08/2018

Given the unprecedented effective area, the new ATHENA Silicon Pore Optics (SPO) focusing technology, the dynamic and variable L2 environment, where no X-ray mission has flown up to date, a dedicated Geant4 simulation campaign is needed to evaluate the impact of low energy protons scattering on the ATHENA mirror surface and the induced residual background level on its X-ray detectors. The Geant4 mass model is built as part of the ESA AREMBES project activities using the BoGEMMS framework. An SPO mirror module row is the atomic unit of the mass model, allowing the simulation of the full structure by means of 20 independent runs, one for each row. Thanks to the BoGEMMS configuration files, both single pores, mirror modules or the entire SPO row can be built with the same Geant4 geometry. Both Remizovich, in its elastic approximation, and Coulomb single scattering Geant4 models are used in the interaction of mono-energetic proton beams with a single SPO pore. The scattering efficiency for the first model is almost twice the efficiency obtained with the latter but for both cases we obtain similar polar and azimuthal angular distributions, with about 70-75% of scatterings generated by single or double reflections. The soft proton flux modelled for the plasma sheet region is used as input for the simulation of soft proton funnelling by the full SPO mass model. A much weaker soft proton vignetting than the one observed by XMM-Newton EPIC detectors is generated by ATHENA mirrors. The residual soft proton flux reaching the focal plane, defined as a 15 cm radius, is 10^4 times lower than the input L2 soft proton population entering the mirror, at the same energy, with rates comparable or higher than the ones observed in XMM EPIC-pn most intense soft proton flares., Comment: Proceeding of the SPIE Astronomical Telescopes + Instrumentation Conference, 10 - 15 June 2018

BoGEMMS, (Bologna Geant4 Multi-Mission Simulator) is a software project for fast simulation of payload on board of scientific satellites for prompt background evaluation that has been developed at the INAF/IASF Bologna. By exploiting the Geant4 set of libraries, BoGEMMS allows to interactively set the geometrical and physical parameters (e.g. physics list, materials and thicknesses), recording the interactions (e.g. energy deposit, position, interacting particle) in NASA FITS and CERN root format output files and filtering the output as a real observation in space, to finally produce the background detected count rate and spectra. Four different types of output can be produced by the BoGEMMS capturing different aspects of the interactions. The simulator can also run in parallel jobs and store the results in a centralized server via xrootd protocol. The BoGEMMS is a multi-mission tool, generally designed to be applied to any high-energy mission for which the shielding and instruments performances analysis is required., Comment: 5 pages, 3 figures

After the development of a BoGEMMS (Bologna Geant4 Multi-Mission Simulator) template for the back- ground study of X-ray telescopes, a new extension is built for the simulation of a Gamma-ray space mission (e.g. AGILE, Fermi), conceived to work as a common, multi-purpose framework for the present and future electron tracking gamma-ray space telescopes. The Gamma-ray extension involves the Geant4 mass model, the physics list and, more important, the production and treatment of the simulation output. From the user point of view, the simulation set-up follows a tree structure, with the main level being the selection of the simulation framework (the general, X-ray or gamma-ray application) and the secondary levels being the detailed configuration of the geometry and the output format. The BoGEMMS application to Gamma-ray missions has been used to evaluate the instrument performances of a new generation of Gamma-ray tele- scopes (e.g. Gamma-Light), and a full simulation of the AGILE mission is currently under construction, to scientifically validate and calibrate the simulator with real in-space data sets. A complete description of the BoGEMMS Gamma-ray framework is presented here, with an overview of the achieved results for the potential application to present and future experiments (e.g., GAMMA-400 and Gamma-Light). The evaluation of the photon conversion efficiency to beta particle pairs and the comparison to tabulated data allows the preliminary physical validation of the overall architecture. The Gamma-ray module application for the study of the Gamma-Light instrument performances is reported as reference test case.

Consider $n$ independent measurements, with the additional information of the times at which measurements are performed. This paper deals with testing statistical hypotheses when $n$ is large and only a small amount of observations concentrated in short time intervals are relevant to the study. We define a testing procedure in terms of multiple likelihood ratio (LR) statistics obtained by splitting the observations into groups, and in accordance with the following principles: P1) each LR statistic is formed by gathering the data included in $G$ consecutive vectors of observations, where $G$ is a suitable time window defined a priori with respect to an arbitrary choice of the `origin of time'; P2) the null statistical hypothesis is rejected only if at least $k$ LR statistics are sufficiently small, for a suitable choice of $k$. We show that the application of the classical Wilks' theorem may be affected by the arbitrary choice of the "origin of time", in connection with P1). We then introduce a Wilks' theorem for grouped data which leads to a testing procedure that overcomes the problem of the arbitrary choice of the `origin of time', while fulfilling P1) and P2). Such a procedure is more powerful than the corresponding procedure based on Wilks' theorem., Comment: arXiv admin note: text overlap with arXiv:1411.0947

Low energy protons (< 300 keV) can enter the field of view of X-ray space telescopes, scatter at small incident angles, and deposit energy on the detector, causing intense background flares at the focal plane or in the most extreme cases, damaging the X-ray detector. A correct modelization of the physics process responsible for the grazing angle scattering processes is mandatory to evaluate the impact of such events on the performance of future X-ray telescopes as the ESA ATHENA mission. For the first time the Remizovich model, in the approximation of no energy losses, is implemented top of the Geant4 release 10.2. Both the new scattering physics and the built-in Coulomb scattering are used to reproduce the latest experimental results on grazing angle proton scattering. At 250 keV multiple scattering delivers large proton angles and it is not consistent with the observation. Among the tested models, the single scattering seems to better reproduce the scattering efficiency at the three energies but energy loss obtained at small scattering angles is significantly lower than the experimental values. In general, the energy losses obtained in the experiment are higher than what obtained by the simulation. The experimental data are not completely representative of the soft proton scattering experienced by current X-ray telescopes because of the lack of measurements at low energies (< 200 keV) and small reflection angles, so we are not able to address any of the tested models as the one that can certainly reproduce the scattering behavior of low energy protons expected for the ATHENA mission. We can, however, discard multiple scattering as the model able to reproduce soft proton funneling, and affirm that Coulomb single scattering can represent, until further measurements, the best approximation of the proton scattered angular distribution at the exit of X-ray optics., Comment: submitted to Experimental Astronomy

ATHENA, with a launch foreseen in 2028 towards the L2 orbit, addresses the science theme "The Hot and Energetic Universe", coupling a high-performance X-ray Telescope with two complementary focal-plane instruments. One of these, the X-ray Integral Field Unit (X-IFU) is a TES based kilo-pixel array providing spatially resolved high-resolution spectroscopy (2.5 eV at 6 keV) over a 5 arcmin FoV. The background for this kind of detectors accounts for several components: the diffuse Cosmic X-ray Background, the low energy particles (<~100 keV) focalized by the mirrors and reaching the detector from inside the field of view, and the high energy particles (>~100 MeV) crossing the spacecraft and reaching the focal plane from every direction. Each one of these components is under study to reduce their impact on the instrumental performances. This task is particularly challenging, given the lack of data on the background of X-ray detectors in L2, the uncertainties on the particle environment to be expected in such orbit, and the reliability of the models used in the Monte Carlo background computations. As a consequence, the activities addressed by the group range from the reanalysis of the data of previous missions like XMM-Newton, to the characterization of the L2 environment by data analysis of the particle monitors onboard of satellites present in the Earth magnetotail, to the characterization of solar events and their occurrence, and to the validation of the physical models involved in the Monte Carlo simulations. All these activities will allow to develop a set of reliable simulations to predict, analyze and find effective solutions to reduce the particle background experienced by the X-IFU, ultimately satisfying the scientific requirement that enables the science of ATHENA. While the activities are still ongoing, we present here some preliminary results already obtained by the group.

e-ASTROGAM (`enhanced ASTROGAM') is a breakthrough Observatory mission dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with polarimetric capability. In the largely unexplored MeV-GeV domain, e-ASTROGAM will open a new window on the non-thermal Universe, making pioneering observations of the most powerful Galactic and extragalactic sources, elucidating the nature of their relativistic outflows and their effects on Galactic ecosystems. With a line sensitivity in the MeV energy range one to two orders of magnitude better than previous generation instruments, will determine the origin of key isotopes fundamental for the understanding of supernova explosion and the chemical evolution of our Galaxy. The mission will provide unique data of significant interest to a broad astronomical community, complementary to powerful observatories such as LIGO-Virgo-GEO600-KAGRA, SKA, ALMA, E-ELT, TMT, LSST, JWST, Athena, CTA, IceCube, KM3NeT, and the promise of eLISA. Keywords: High-energy gamma-ray astronomy, High-energy astrophysics, Nuclear Astrophysics, Compton and Pair creation telescope, Gamma-ray bursts, Active Galactic Nuclei, Jets, Outflows, Multiwavelength observations of the Universe, Counterparts of gravitational waves, Fermi, Dark Matter, Nucleosynthesis, Early Universe, Supernovae, Cosmic Rays, Cosmic antimatter., Comment: Exp Astron (2017)

The Cherenkov Telescope Array (CTA) is the future large observatory in the very high energy (VHE) domain. Operating from 20 GeV to 300 TeV, it will be composed of tens of Imaging Air Cherenkov Telescopes (IACTs) displaced in a large area of a few square kilometers in both the southern and northern hemispheres. The CTA/DATA On-Site Analysis (OSA) is the system devoted to the development of dedicated pipelines and algorithms to be used at the CTA site for the reconstruction, data quality monitoring, science monitoring and realtime science alerting during observations. The OSA integral sensitivity is computed here for the most studied source at Gamma-rays, the Crab Nebula, for a set of exposures ranging from 1000 seconds to 50 hours, using the full CTA Southern array. The reason for the Crab Nebula selection as the first example of OSA integral sensitivity is twofold: (i) this source is characterized by a broad spectrum covering the entire CTA energy range; (ii) it represents, at the time of writing, the standard candle in VHE and it is often used as unit for the IACTs sensitivity. The effect of different Crab Nebula emission models on the CTA integral sensitivity is evaluated, to emphasize the need for representative spectra of the CTA science targets in the evaluation of the OSA use cases. Using the most complete model as input to the OSA integral sensitivity, we obtain a significant detection of the Crab nebula (about 10% of flux) even for a 1000 second exposure, for an energy threshold less than 10 TeV.

Low energy protons (<100-300 keV) in the Van Allen belt and the outer regions can enter the field of view of X-ray focusing telescopes, interact with the Wolter-I optics, and reach the focal plane. The use of special filters protects the XMM-Newton focal plane below an altitude of 70000 km, but above this limit the effect of soft protons is still present in the form of sudden flares in the count rate of the EPIC instruments, causing the loss of large amounts of observing time. We try to characterize the input proton population and the physics interaction by simulating, using the BoGEMMS framework, the proton interaction with a simplified model of the X-ray mirror module and the focal plane, and comparing the result with a real observation. The analysis of ten orbits of observations of the EPIC/pn instrument show that the detection of flares in regions far outside the radiation belt is largely influenced by the different orientation of the Earth's magnetosphere respect with XMM-Newton's orbit, confirming the solar origin of the soft proton population. The Equator-S proton spectrum at 70000 km altitude is used for the proton population entering the optics, where a combined multiple and Firsov scattering is used as physics interaction. If the thick filter is used, the soft protons in the 30-70 keV energy range are the main contributors to the simulated spectrum below 10 keV. We are able to reproduce the proton vignetting observed in real data-sets, with a 50\% decrease from the inner to the outer region, but a maximum flux of 0.01 counts cm-2 s-1 keV-1 is obtained below 10 keV, about 5 times lower than the EPIC/MOS detection and 100 times lower than the EPIC/pn one. Given the high variability of the flare intensity, we conclude that an average spectrum, based on the analysis of a full season of soft proton events is required to compare Monte Carlo simulations with real events.

The Cherenkov Telescope Array (CTA) observatory will be one of the largest ground-based very high-energy gamma-ray observatories. The On-Site Analysis will be the first CTA scientific analysis of data acquired from the array of telescopes, in both northern and southern sites. The On-Site Analysis will have two pipelines: the Level-A pipeline (also known as Real-Time Analysis, RTA) and the level-B one. The RTA performs data quality monitoring and must be able to issue automated alerts on variable and transient astrophysical sources within 30 seconds from the last acquired Cherenkov event that contributes to the alert, with a sensitivity not worse than the one achieved by the final pipeline by more than a factor of 3. The Level-B Analysis has a better sensitivity (not be worse than the final one by a factor of 2) and the results should be available within 10 hours from the acquisition of the data: for this reason this analysis could be performed at the end of an observation or next morning. The latency (in particular for the RTA) and the sensitivity requirements are challenging because of the large data rate, a few GByte/s. The remote connection to the CTA candidate site with a rather limited network bandwidth makes the issue of the exported data size extremely critical and prevents any kind of processing in real-time of the data outside the site of the telescopes. For these reasons the analysis will be performed on-site with infrastructures co-located with the telescopes, with limited electrical power availability and with a reduced possibility of human intervention. This means, for example, that the on-site hardware infrastructure should have low-power consumption. A substantial effort towards the optimization of high-throughput computing service is envisioned to provide hardware and software solutions with high-throughput, low-power consumption at a low-cost., Comment: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.05894

The Cherenkov Telescope Array (CTA) is the next generation observatory for the study of very high-energy gamma rays from about 20 GeV up to 300 TeV. Thanks to the large effective area and field of view, the CTA observatory will be characterized by an unprecedented sensitivity to transient flaring gamma-ray phenomena compared to both current ground (e.g. MAGIC, VERITAS, H.E.S.S.) and space (e.g. Fermi) gamma-ray telescopes. In order to trigger the astrophysics community for follow-up observations, or being able to quickly respond to external science alerts, a fast analysis pipeline is crucial. This will be accomplished by means of a Real-Time Analysis (RTA) pipeline, a fast and automated science alert trigger system, becoming a key system of the CTA observatory. Among the CTA design key requirements to the RTA system, the most challenging is the generation of alerts within 30 seconds from the last acquired event, while obtaining a flux sensitivity not worse than the one of the final analysis by more than a factor of 3. A dedicated software and hardware architecture for the RTA pipeline must be designed and tested. We present comparison of OpenCL solutions using different kind of devices like CPUs, Graphical Processing Unit (GPU) and Field Programmable Array (FPGA) cards for the Real-Time data reduction of the Cherenkov Telescope Array (CTA) triggered data., Comment: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.05894

The Cherenkov Telescope Array (CTA), the new generation very high-energy gamma-ray observatory, will improve the flux sensitivity of the current Cherenkov telescopes by an order of magnitude over a continuous range from about 10 GeV to above 100 TeV. With tens of telescopes distributed in the Northern and Southern hemispheres, the large effective area and field of view coupled with the fast pointing capability make CTA a crucial instrument for the detection and understanding of the physics of transient, short-timescale variability phenomena (e.g. Gamma-Ray Bursts, Active Galactic Nuclei, gamma-ray binaries, serendipitous sources). The key CTA system for the fast identification of flaring events is the Real-Time Analysis (RTA) pipeline, a science alert system that will automatically detect and generate science alerts with a maximum latency of 30 seconds with respect to the triggering event collection and ensure fast communication to/from the astrophysics community. According to the CTA design requirements, the RTA search for a true transient event should be performed on multiple time scales (from minutes to hours) with a sensitivity not worse than three times the nominal CTA sensitivity. Given the CTA requirement constraints on the RTA efficiency and the fast response ability demanded by the transient science, we perform a preliminary evaluation of the RTA sensitivity as a function of the CTA high-level technical performance (e.g. effective area, point spread function) and the observing time. This preliminary approach allows the exploration of the complex parameter space defined by the scientific and technological requirements, with the aim of defining the feasibility range of the input parameters and the minimum background rejection capability of the RTA pipeline., Comment: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.05894

This paper provides a generalization of a classical result obtained by Wilks about the asymptotic behavior of the likelihood ratio. The new results deal with the asymptotic behavior of the joint distribution of a vector of likelihood ratios which turn out to be stochastically dependent.

High-energy phenomena in the cosmos, and in particular processes leading to the emission of gamma- rays in the energy range 10 MeV - 100 GeV, play a very special role in the understanding of our Universe. This energy range is indeed associated with non-thermal phenomena and challenging particle acceleration processes. The technology involved in detecting gamma-rays is challenging and drives our ability to develop improved instruments for a large variety of applications. GAMMA-LIGHT is a Small Mission which aims at an unprecedented advance of our knowledge in many sectors of astrophysical and Earth studies research. The Mission will open a new observational window in the low-energy gamma-ray range 10-50 MeV, and is configured to make substantial advances compared with the previous and current gamma-ray experiments (AGILE and Fermi). The improvement is based on an exquisite angular resolution achieved by GAMMA-LIGHT using state-of-the-art Silicon technology with innovative data acquisition. GAMMA-LIGHT will address all astrophysics issues left open by the current generation of instruments. In particular, the breakthrough angular resolution in the energy range 100 MeV - 1 GeV is crucial to resolve patchy and complex features of diffuse sources in the Galaxy as well as increasing the point source sensitivity. This proposal addresses scientific topics of great interest to the community, with particular emphasis on multifrequency correlation studies involving radio, optical, IR, X-ray, soft gamma-ray and TeV emission. At the end of this decade several new observatories will be operational including LOFAR, SKA, ALMA, HAWK, CTA. GAMMA-LIGHT will "fill the vacuum" in the 10 MeV-10 GeV band, and will provide invaluable data for the understanding of cosmic and terrestrial high-energy sources., Comment: 6 pages, 8 figures

The Data Access System (DAS) is a metadata and data management software system, providing a reusable solution for the storage of data acquired both from telescopes and auxiliary data sources during the instrument development phases and operations. It is part of the Customizable Instrument WorkStation system (CIWS-FW), a framework for the storage, processing and quick-look at the data acquired from scientific instruments. The DAS provides a data access layer mainly targeted to software applications: quick-look displays, pre-processing pipelines and scientific workflows. It is logically organized in three main components: an intuitive and compact Data Definition Language (DAS DDL) in XML format, aimed for user-defined data types; an Application Programming Interface (DAS API), automatically adding classes and methods supporting the DDL data types, and providing an object-oriented query language; a data management component, which maps the metadata of the DDL data types in a relational Data Base Management System (DBMS), and stores the data in a shared (network) file system. With the DAS DDL, developers define the data model for a particular project, specifying for each data type the metadata attributes, the data format and layout (if applicable), and named references to related or aggregated data types. Together with the DDL user-defined data types, the DAS API acts as the only interface to store, query and retrieve the metadata and data in the DAS system, providing both an abstract interface and a data model specific one in C, C++ and Python. The mapping of metadata in the back-end database is automatic and supports several relational DBMSs, including MySQL, Oracle and PostgreSQL., Comment: Accepted for pubblication on ADASS Conference Series

The CIWS-FW is aimed at providing a common and standard solution for the storage, processing and quick look at the data acquired from scientific instruments for astrophysics. The target system is the instrument workstation either in the context of the Electrical Ground Support Equipment for space-borne experiments, or in the context of the data acquisition system for instrumentation. The CIWS-FW core includes software developed by team members for previous experiments and provides new components and tools that improve the software reusability, configurability and extensibility attributes. The CIWS-FW mainly consists of two packages: the data processing system and the data access system. The former provides the software components and libraries to support the data acquisition, transformation, display and storage in near real time of either a data packet stream and/or a sequence of data files generated by the instrument. The latter is a meta-data and data management system, providing a reusable solution for the archiving and retrieval of the acquired data. A built-in operator GUI allows to control and configure the IW. In addition, the framework provides mechanisms for system error and logging handling. A web portal provides the access to the CIWS-FW documentation, software repository and bug tracking tools for CIWS-FW developers. We will describe the CIWS-FW architecture and summarize the project status., Comment: Accepted for pubblication on ADASS Conference Series

The ASTRI project is the INAF (Italian National Institute for Astrophysics) flagship project developed in the context of the Cherenkov Telescope Array (CTA) international project. ASTRI is dedicated to the realization of the prototype of a Cherenkov small-size dual-mirror telescope (SST-2M) and then to the realization of a mini-array composed of a few of these units. The prototype and all the necessary hardware devices are foreseen to be installed at the Serra La Nave Observing Station (Catania, Italy) in 2014. The upcoming data flow will be properly reduced by dedicated (online and offline) analysis pipelines aimed at providing robust and reliable scientific results (signal detection, sky maps, spectra and light curves) from the ASTRI silicon photo-multipliers camera raw data. Furthermore, a flexible archiving system has being conceived for the storage of all the acquired ASTRI (scientific, calibration, housekeeping) data at different steps of the data reduction up to the final scientific products. In this contribution we present the data acquisition, the analysis pipeline and the archive architecture that will be in use for the ASTRI SST prototype. In addition, the generalization of the data management system to the case of a mini-array of ASTRI telescopes will be discussed., Comment: Poster presented to the International Cosmic Ray Conference (ICRC 2013) composed by 4 pages and 3 figures