Search

The resistance and magnetoresistance of flexible thermoelectric p-type Sb2Te3-MWCNT, p-type Bi2Se3-MWCNT, and n-type Bi2Se3-MWCNT heterostructures were studied in the temperature range from 2 K to 300 K to reveal the conductance mechanisms governing the thermoelectric properties of these heterostructured networks. It was found that the conductance in heterostructured networks at different temperatures is governed by different processes and components of the networks. This effect was found to be related to the growth mechanisms of the Sb2Te3 and Bi2Se3 nanostructures on the MWCNT networks. At near-room temperatures, the Sb2Te3 and Bi2Se3 nanostructures were found to have the dominant contribution to the total conductance of the p-type Sb2Te3-MWCNT and n-type Bi2Se3-MWCNT networks. In turn, the conduction of p-type Bi2Se3-MWCNT heterostructured networks in a full temperature range and p-type Sb2Te3-MWCNT and n-type Bi2Se3-MWCNT heterostructured networks at temperatures below 30 K was governed by the MWCNTs; however, with the contribution from 2D topological states of Sb2Te3 and Bi2Se3 nanostructures, these were manifested by the weak antilocalization effect (WAL) cusps observed at temperatures below 5–10 K for all heterostructured networks considered in this work. [ABSTRACT FROM AUTHOR]

This work is devoted to the fabrication of p-type polyvinyl alcohol (PVA)-based flexible thermoelectric composites using multiwall carbon nanotubes-antimony telluride (MWCNT-Sb2Te3) hybrid filler, the study of the thermoelectrical and mechanical properties of these composites, and the application of these composites in two types (planar and radial) of thermoelectric generators (TEG) in combination with the previously reported PVA/MWCNT-Bi2Se3 flexible thermoelectric composites. While the power factors of PVA/MWCNT-Sb2Te3 and PVA/MWCNT-Bi2Se3 composites with 15 wt.% filler were found to be similar, the PVA/MWCNT-Sb2Te3 composite with 25 wt.% filler showed a ~2 times higher power factor in comparison with the PVA/MWCNT-Bi2Se3 composites with 30 wt.% filler, which is attributed to its reduced electrical resistivity. In addition, developed PVA/MWCNT-Sb2Te3 composites showed a superior mechanical, electrical, and thermoelectric stability during 100 consequent bending cycles down to a 3 mm radius, with insignificant fluctuations of the resistance within 0.01% of the initial resistance value of the not bent sample. Demonstrated for the first time, 2-leg TEGs composed from p-type PVA/MWCNT-Sb2Te3 and n-type PVA/MWCNT-Bi2Se3 composites showed a stable performance under different external loads and showed their potential for applications involving low temperature gradients and power requirements in the range of nW. [ABSTRACT FROM AUTHOR]

The use of organic–inorganic nanocomposites has shown the greatest potential for engineering efficient flexible thermoelectric devices. In this work, a novel approach of encapsulation of as‐grown bismuth selenide‐multiwalled carbon nanotubes (Bi2Se3‐MWCNT) hybrid network in polyvinyl alcohol for fabrication of n‐type flexible thermoelectric films is demonstrated as a successful alternative to the mechanically mixed counterparts. The developed stable flexible n‐type thermoelectric material has a Seebeck coefficient and power factor at room temperature as high as −85 μV K−1 and 0.4 μW m−1 K−2, and figure‐of‐merit, exceeding the value shown by the mixed counterpart by ≈2 orders of magnitude, while requiring 3–4 times less inorganic material in comparison with mixed composites. Charge carrier transport mechanisms and contribution of Bi2Se3 and MWCNT components of not encapsulated and encapsulated hybrid networks to the total Seebeck coefficient, electrical conductance, and power factor are studied. In addition, the fabricated flexible thermoelectric films show good environmental stability at relative humidity levels up to 60%, as well as great mechanical and electrical stability with the increase of resistance within 0.5% and deviations of the Seebeck coefficient within 2% from the initial value during the 100 repetitive bending cycles. [ABSTRACT FROM AUTHOR]

This research is devoted to the fabrication of polyvinyl alcohol (PVOH) based n-type thermoelectric composites with innovative hybrid bismuth selenide-multiwalled carbon nanotube (Bi2Se3-MWCNT) fillers for application in flexible thermoelectric devices. Hybrid fillers were synthesized by direct deposition of Bi2Se3 on multiwalled carbon nanotubes using a physical vapor deposition method, thus ensuring direct electrical contact between the carbon nanotubes and Bi2Se3. The Seebeck coefficient of prepared PVOH/Bi2Se3-MWCNT composites was found to be comparable with that for the Bi2Se3 thin films, reaching −100 µV·K−1 for the composite with 30 wt.% filler, and fluctuations of the resistance of these composites did not exceed 1% during 100 repetitive bending cycles down to 10 mm radius, indicating the good mechanical durability of these composites and proving their high potential for application in flexible thermoelectrics. In addition, other properties of the fabricated composites that are important for the use of polymer-based materials such as thermal stability, storage modulus and linear coefficient of thermal expansion were found to be improved in comparison with the neat PVOH. [ABSTRACT FROM AUTHOR]