Search

Background We compared the quality of ethnicity coding within the Public Health Scotland Ethnicity Look-up (PHS-EL) dataset, and other National Health Service datasets, with the 2011 Scottish Census. Methods Measures of quality included the level of missingness and misclassification. We examined the impact of misclassification using Cox proportional hazards to compare the risk of severe coronavirus disease (COVID-19) (hospitalization & death) by ethnic group. Results Misclassification within PHS-EL was higher for all minority ethnic groups [12.5 to 69.1%] compared with the White Scottish majority [5.1%] and highest in the White Gypsy/Traveller group [69.1%]. Missingness in PHS-EL was highest among the White Other British group [39%] and lowest among the Pakistani group [17%]. PHS-EL data often underestimated severe COVID-19 risk compared with Census data. e.g. in the White Gypsy/Traveller group the Hazard Ratio (HR) was 1.68 [95% Confidence Intervals (CI): 1.03, 2.74] compared with the White Scottish majority using Census ethnicity data and 0.73 [95% CI: 0.10, 5.15] using PHS-EL data; and HR was 2.03 [95% CI: 1.20, 3.44] in the Census for the Bangladeshi group versus 1.45 [95% CI: 0.75, 2.78] in PHS-EL. Conclusions Poor quality ethnicity coding in health records can bias estimates, thereby threatening monitoring and understanding ethnic inequalities in health. [ABSTRACT FROM AUTHOR]

Background Migrant and ethnic minority groups are often assumed to have poor health relative to the majority population. Few countries have the capacity to study a key indicator, mortality, by ethnicity and country of birth. We hypothesized at least 10% differences in mortality by ethnic group in Scotland that would not be wholly attenuated by adjustment for socio-economic factors or country of birth. Methods and findings We linked the Scottish 2001 Census to mortality data (2001-2013) in 4.62 million people (91% of estimated population), calculating age-adjusted mortality rate ratios (RRs; multiplied by 100 as percentages) with 95% confidence intervals (CIs) for 13 ethnic groups, with the White Scottish group as reference (ethnic group classification follows the Scottish 2001 Census). The Scottish Index of Multiple Deprivation, education status, and household tenure were socio-economic status (SES) confounding variables and born in the UK or Republic of Ireland (UK/RoI) an interacting and confounding variable. Smoking and diabetes data were from a primary care sub-sample (about 53,000 people). Males and females in most minority groups had lower age-adjusted mortality RRs than the White Scottish group. The 95% CIs provided good evidence that the RR was more than 10% lower in the following ethnic groups: Other White British (72.3 [95% CI 64.2, 81.3] in males and 75.2 [68.0, 83.2] in females); Other White (80.8 [72.8, 89.8] in males and 76.2 [68.6, 84.7] in females); Indian (62.6 [51.6, 76.0] in males and 60.7 [50.4, 73.1] in females); Pakistani (66.1 [57.4, 76.2] in males and 73.8 [63.7, 85.5] in females); Bangladeshi males (50.7 [32.5, 79.1]); Caribbean females (57.5 [38.5, 85.9]); and Chinese (52.2 [43.7, 62.5] in males and 65.8 [55.3, 78.2] in females). The differences were diminished but not eliminated after adjusting for UK/RoI birth and SES variables. A mortality advantage was evident in all 12 minority groups for those born abroad, but in only 6/12 male groups and 5/12 female groups of those born in the UK/RoI. In the primary care sub-sample, after adjustment for age, UK/RoI born, SES, smoking, and diabetes, the RR was not lower in Indian males (114.7 [95% CI 78.3, 167.9]) and Pakistani females (103.9 [73.9, 145.9]) than in White Scottish males and females, respectively. The main limitations were the inability to include deaths abroad and the small number of deaths in some ethnic minority groups, especially for people born in the UK/RoI. Conclusions There was relatively low mortality for many ethnic minority groups compared to the White Scottish majority. The mortality advantage was less clear in UK/RoI-born minority group offspring than in immigrants. These differences need explaining, and health-related behaviours seem important. Similar analyses are required internationally to fulfil agreed goals for monitoring, understanding, and improving health in ethnically diverse societies and to apply to health policy, especially on health inequalities and inequities., Author(s): Raj S. Bhopal 1,*, Laurence Gruer 1, Genevieve Cezard 1, Anne Douglas 1, Markus F. C. Steiner 2,3, Andrew Millard 4, Duncan Buchanan 5, S. Vittal Katikireddi 6, Aziz [...]

The objective was to examine and quantify the influence of fibre dimensions, persistence in the lung, and dissolution and cell toxicity in vitro, on the risks of developing lung tumours in rats. Data were brought together from the studies carried out at the IOM under the Colt Fibre Research Programme, and from studies carried out in Switzerland and the USA under the programme of the Thermal Insulation Manufacturers Association. In both studies, groups of rats were exposed by inhalation to a range of airborne fibres. At the end of their lives they were examined for the presence of benign and malignant lung tumours and mesothelioma. The studies differed in a number of details, but were combined on the basis of approximate equivalence of cumulative exposure to airborne fibres. Logistic regression models were used to relate differences in carcinogenicity to fibre characteristics; dimensions, persistence in the lung after intratracheal injection, dissolution rates from bench-top flow-through experiments, measures of inflammation, and other cell responses to fibres in vitro. Despite the small number of data points, the results suggested a primary influence of the airborne concentrations of the numbers of fibres thinner than 1μm diameter and longer than 20μm, and of the measured dissolution rate of the fibres. While these results are based on only a small number of fibre types, the statistical model fits the data reasonably well, and enables some cautious insights into the quantitative influences of dimensions and biopersistence. Results were broadly consistent with those from intraperitoneal injection studies of the same fibres, in that the responses were dependent on both the durability of the fibres and the numbers of long thin fibres. In vitro and in vivo cell responses did not predict significantly the risk of cancer following inhalation. [ABSTRACT FROM PUBLISHER]

A range of respirable man-made mineral fibres were tested for evidence of carcinogenicity by injection into the peritoneal cavity of male SPF Wistar rats; and differences in carcinogenicity were related to the dimensions and biopersistence of the injected fibres. The fibres tested included an amosite asbestos, a silicon carbide whisker, a special purpose glass microfibre, and a range of other man-made vitreous fibres (MMVFs) and refractory ceramic fibres (RCFs) from the TIMA fibre repository. The injected dose of each was designed as the estimated mass required to contain 109 fibres >5μm in length, as determined by optical microscopy. The numbers of long fibres (>15μm) contained in these doses ranged across fibres from 0.1×109 to 0.8×109 fibres; the number of long fibres thinner than 0.95μm ranged from 0.015×109 to 0.4×109. The treatment groups contained between 18 and 24 animals. Animals were killed when they showed signs of debilitation. At autopsy, the diagnosis of mesothelioma was usually obvious macroscopically. Otherwise, histological examination of peritoneal organs was used to search for early tumour development. Judged by median survival time, four of the fibre types, in the doses administered, presented higher mesothelioma activity than amosite asbestos. The other fibres tested were less carcinogenic than the amosite. Only a ceramic material derived by extreme heating to simulate the effect of furnace or oven conditions, produced no mesotheliomas. Attempts were made, using regression models, to relate these differences to fibre dimensions and to measures of durability from separate experiments. The results pointed principally to a link with the injected numbers of fibres >20μm in length and with biopersistence in the rat lung of fibres longer than 5μm. Improved quantification of the relative importance of fibre dimensions and biopersistence indices requires experimentation with a range of doses. [ABSTRACT FROM PUBLISHER]

The study objectives were to assess the ability of intratracheal injection methods to discriminate between nine fibre types in respect of pulmonary biopersistence, and to provide approximate estimates of relative biopersistence and durability for a study of general relationships with biological and toxicological responses. The test fibres included six samples of size-selected fibre types specially prepared for research purposes, two commercially available fibres, and amosite. A 1mg dose of each fibre type was administered to rats by intratracheal injection. The relative biopersistence of fibres in different size categories was assessed from the changes in mean lung burden, as determined by electron microscopy, at 3 days and 1, 6 and 12 months after injection. The ability of the test materials to resist dissolution was measured in a parallel series of simple in vitro acellular experiments at two pHs and in a continuous flow dissolution test. The observed differences in the persistence of fibres of differing length recovered from rat lungs were consistent with the current hypothesis that short fibres are cleared by cellular processes and long fibres by dissolution and disintegration. Differences in persistence of long (>20μm) fibres were correlated with measured rates of dissolution in vitro. Differences in persistence among those fibre types also studied by others workers were consistent with their findings after inhalation and intratracheal injection. Overall, the differences in the biopersistences of the test fibres following intratracheal injection were sufficient to enable an examination of the relationship of biopersistence with other biological and toxicological responses. Biopersistence was influenced by both fibre dimensions and solubility. [ABSTRACT FROM PUBLISHER]