Search

This article presents a case study demonstrating a non-intrusive method for the well-being monitoring of elderly people. It is based on our real-time energy measurement system, which uses tiny beacons attached to electricity meters. Four participants aged 67-82 years took part in our study. We observed their electric power consumption for approx. a month, and then we analyzed them, taking into account the participants' notes on their activities. We created typical daily usage profiles for each participant and used anomaly detection to find unusual energy consumption. We found out that real-time energy measurement can give significant insight into someone's daily activities and, consequently, bring invaluable information to caregivers about the well-being of an elderly person, while being discreet and entirely non-intrusive., Comment: 6 pages, 4 figures

In this article, we present the results of experiments with finding an efficient radio transmission method for an electric energy measurement system called OneMeter 2.0. This system offers a way of collecting energy usage data from beacons attached to regular, non-smart meters. In our study, we compared several low power wide area network (LPWAN) protocols, out of which we chose the LoRaWAN protocol. We verified the energy consumption of a LoRa-based transmission unit, as well as the transmission range between network nodes in urban conditions. We discovered that LoRaWAN-based transmission was highly energy-efficient and offered decent coverage, even in a difficult, dense urban environment., Comment: 7 pages, 8 figures

In the era of cutting-edge autonomous systems, Unmanned Aerial Vehicles (UAVs) are becoming an essential part of the solutions for numerous complex challenges. This paper evaluates UAV peer-to-peer telemetry communication, highlighting its security vulnerabilities and explores a transition to a het-erogeneous multi-hop mesh all-to-all communication architecture to increase inter-swarm connectivity and reliability. Additionally, we suggest a symmetric key agreement and data encryption mechanism implementation for inter - swarm communication, to ensure data integrity and confidentiality without compromising performance., Comment: 4 pages, 2 figures, submitted and accepted to iCCC24

Many technical solutions are bio-inspired. Octopus-inspired robotic arms belong to continuum robots which are used in minimally invasive surgery or for technical system restoration in areas difficult-toaccess. Continuum robot missions are bounded with their motions, whereby the motion of the robots is controlled by humans via wireless communication. In case of a lost connection, robot autonomy is required. Distributed control and distributed decision-making mechanisms based on artificial intelligence approaches can be a promising solution to achieve autonomy of technical systems and to increase their resilience. However these methods are not well investigated yet. Octopuses are the living example of natural distributed intelligence but their learning and decision-making mechanisms are also not fully investigated and understood yet. Our major interest is investigating mechanisms of Distributed Artificial Intelligence as a basis for improving resilience of complex systems. We decided to use a physical continuum robot prototype that is able to perform some basic movements for our research. The idea is to research how a technical system can be empowered to combine movements into sequences of motions by itself. For the experimental investigations a suitable physical prototype has to be selected, its motion control has to be implemented and automated. In this paper, we give an overview combining different fields of research, such as Distributed Artificial Intelligence and continuum robots based on 98 publications. We provide a detailed description of the basic motion control models of continuum robots based on the literature reviewed, discuss different aspects of autonomy and give an overview of physical prototypes of continuum robots.

X (formerly Twitter) has evolved into a contemporary agora, offering a platform for individuals to express opinions and viewpoints on current events. The majority of the topics discussed on Twitter are directly related to ongoing events, making it an important source for monitoring public discourse. However, linking tweets to specific news presents a significant challenge due to their concise and informal nature. Previous approaches, including topic models, graph-based models, and supervised classifiers, have fallen short in effectively capturing the unique characteristics of tweets and articles. Inspired by the success of the CLIP model in computer vision, which employs contrastive learning to model similarities between images and captions, this paper introduces a contrastive learning approach for training a representation space where linked articles and tweets exhibit proximity. We present our contrastive learning approach, CATBERT (Contrastive Articles Tweets BERT), leveraging pre-trained BERT models. The model is trained and tested on a dataset containing manually labeled English and Polish tweets and articles related to the Russian-Ukrainian war. We evaluate CATBERT's performance against traditional approaches like LDA, and the novel method based on OpenAI embeddings, which has not been previously applied to this task. Our findings indicate that CATBERT demonstrates superior performance in associating tweets with relevant news articles. Furthermore, we demonstrate the performance of the models when applied to finding the main topic -- represented by an article -- of the whole cascade of tweets. In this new task, we report the performance of the different models in dependence on the cascade size.

Community detection is a critical challenge in analysing real graphs, including social, transportation, citation, cybersecurity, and many other networks. This article proposes three new, general, hierarchical frameworks to deal with this task. The introduced approach supports various linkage-based clustering algorithms, vertex proximity matrices, and graph representation learning models. We compare over a hundred module combinations on the Stochastic Block Model graphs and real-life datasets. We observe that our best pipelines (Wasserman-Faust and the mutual information-based PPMI proximity, as well as the deep learning-based DNGR representations) perform competitively to the state-of-the-art Leiden and Louvain algorithms. At the same time, unlike the latter, they remain hierarchical. Thus, they output a series of nested partitions of all possible cardinalities which are compatible with each other. This feature is crucial when the number of correct partitions is unknown in advance.

Minimum spanning trees (MSTs) provide a convenient representation of datasets in numerous pattern recognition activities. Moreover, they are relatively fast to compute. In this paper, we quantify the extent to which they are meaningful in low-dimensional partitional data clustering tasks. By identifying the upper bounds for the agreement between the best (oracle) algorithm and the expert labels from a large battery of benchmark data, we discover that MST methods can be very competitive. Next, we review, study, extend, and generalise a few existing, state-of-the-art MST-based partitioning schemes. This leads to some new noteworthy approaches. Overall, the Genie and the information-theoretic methods often outperform the non-MST algorithms such as K-means, Gaussian mixtures, spectral clustering, Birch, density-based, and classical hierarchical agglomerative procedures. Nevertheless, we identify that there is still some room for improvement, and thus the development of novel algorithms is encouraged.

Recently autonomous and semi-autonomous Unmanned Aerial Vehicle (UAV) swarms started to receive a lot of research interest and demand from various civil application fields. However, for successful mission execution, UAV swarms require Global navigation satellite system signals and in particular, Global Positioning System (GPS) signals for navigation. Unfortunately, civil GPS signals are unencrypted and unauthenticated, which facilitates the execution of GPS spoofing attacks. During these attacks, adversaries mimic the authentic GPS signal and broadcast it to the targeted UAV in order to change its course, and force it to land or crash. In this study, we propose a GPS spoofing detection mechanism capable of detecting single-transmitter and multi-transmitter GPS spoofing attacks to prevent the outcomes mentioned above. Our detection mechanism is based on comparing the distance between each two swarm members calculated from their GPS coordinates to the distance acquired from Impulse Radio Ultra-Wideband ranging between the same swarm members. If the difference in distances is larger than a chosen threshold the GPS spoofing attack is declared detected., Comment: 8 pages, 3 figures

Jamming is a form of the Denial of Service (J-DoS) attack. It is a significant threat that causes malfunction in Unmanned Aerial Vehicle systems, especially when used in hostile environments. The attackers mainly operate in the wireless communication environment by following a few preexisting scenarios. In this paper, we propose an idea for a Jamming detection mechanism. The mechanism utilizes the network parameters available to the system and some additional measures to distinguish between bad transmission quality and Jamming to avoid false positive alarms. After detecting a Jamming attack, appropriate countermeasures or mitigation techniques can be applied to keep the system safe., Comment: 6 pages, 1 figure

The volume available on small satellites restricts the size of optical apertures to a few centimetres, limiting the Ground-Sampling Distance (GSD) in the visible to typically 3 m at 500 km. We present in this paper the latest development of a laboratory demonstrator of a segmented deployable telescope that will triple the achievable ground resolution and improve photometric capability of CubeSat imagers. Each mirror segment is folded for launch and unfolds in space. We demonstrate through laboratory validation very high deployment repeatability of the mirrors <{\pm}5 {\mu}m. To enable diffraction-limited imaging, segments are controlled in piston, tip, and tilt. This is achieved by an initial coarse alignment of the mirrors followed by a fine phasing step. Finally, we investigate the impact of the thermal environment on high-order wavefront error and the conceptual design of a deployable secondary fitting inside 1U., Comment: Proceedings of 13th IAA Symposium on Small Satellites for Earth Observation (SSSEO 2021)

Convolutional neural networks (CNNs) are used in many areas of computer vision, such as object tracking and recognition, security, military, and biomedical image analysis. This review presents the application of convolutional neural networks in one of the fields of dentistry - orthodontics. Advances in medical imaging technologies and methods allow CNNs to be used in orthodontics to shorten the planning time of orthodontic treatment, including an automatic search of landmarks on cephalometric X-ray images, tooth segmentation on Cone-Beam Computed Tomography (CBCT) images or digital models, and classification of defects on X-Ray panoramic images. In this work, we describe the current methods, the architectures of deep convolutional neural networks used, and their implementations, together with a comparison of the results achieved by them. The promising results and visualizations of the described studies show that the use of methods based on convolutional neural networks allows for the improvement of computer-based orthodontic treatment planning, both by reducing the examination time and, in many cases, by performing the analysis much more accurately than a manual orthodontist does., Comment: Preprint to Elsevier