Search

Urban centers across the globe are responsible for a significant fraction of energy consumption and CO2 emission. As urban centers continue to grow, the popularity of glass as cladding material in urban buildings is an alarming trend. Dynamic windows reduce heating and cooling loads in buildings by passive heating in cold seasons and mitigating solar heat gain in hot seasons. In this work, we develop a mesoscopic building energy model that demonstrates reduced building energy consumption when thermochromic windows are employed. Savings are realized across eight disparate climate zones of the United States. We use the model to determine the ideal critical transition temperature of 20 to 27.5 {\deg}C for thermochromic windows based on metal halide perovskite materials. Ideal transition temperatures are realized experimentally in composite metal halide perovskite film composed of perovskite crystals and an adjacent reservoir phase. The transition temperature is controlled by co-intercalating methanol, instead of water, with methylammonium iodide and tailoring the hydrogen-bonding chemistry of the reservoir phase. Thermochromic windows based on metal halide perovskites represent a clear opportunity to mitigate the effects of energy-hungry buildings.

Metal halide perovskites (MHPs) combine extraordinary optoelectronic properties with chemical and mechanical properties not found in their semiconductor counterparts. For instance, they exhibit optoelectronic properties on par with single-crystalline gallium arsenide yet exhibit near-zero formation energies. The small lattice energy of MHPs means they undergo a rich diversity of polymorphism near standard conditions similar to organic materials. MHPs also demonstrate ionic transport as high as state-of-the-art battery electrodes. The most widespread applications for metal halide perovskites (e.g. photovoltaics and solid-state lighting) typically view low formation energies, polymorphism, and high ion transport as a nuisance that should be eliminated. Here, we put these properties into perspective by comparing them to other technologically relevant semiconductors in order to highlight how unique this combination of properties is for semiconductors and to illustrate ways to leverage these properties in emerging applications.

Temperature coefficients for maximum power (TPCE), open circuit voltage (VOC), and short circuit current (JSC) are standard specifications included in data sheets for any commercially available pho...

Colloidal halide perovskite nanocrystals (NCs) have the possibility of easy scale-up due to their batch synthesis and have demonstrated excellent optoelectronic properties. In particular, perovskit...

The ability to engineer the surface chemistry of complex ternary nanocrystals is critical to their successful application in photovoltaic, thermoelectric, and other energy conversion devices. For m...

Motivated by increased awareness about nitrate contamination of surface waters and its deleterious effects in human and animal health, we sought an alternative, non-noble metal catalyst for the che...

Halide perovskites are exciting photoactive semiconductors with exceptional photovoltaic and optoelectronic properties. Literature in this area focuses on solution phase aspects of these materials, for example in inks for solar cells, or the growth of bulk or nanosized crystals. Critically, varying solute-solvent interactions often cause heavily mixed perovskites to have compositions that strongly deviate from their synthetic loading. In contrast, complex halide perovskites prepared by solid-state methods in the absence of solvents display much more predictable compositions and significantly suppressed phase segregation. Further, because they generate less waste, solvent-free methods are often ‘greener’ and more industrially scalable. Herein, we review the solvent-free methods used to synthesize single composition ‘parent’ and heavily mixed perovskites in the solid-state. We discuss the known mechanisms for ion diffusion involved in these transformations, summarize and contrast their main benefits and features, and review their use in the preparation of mixed-cation and/or mixed-halide perovskites.

Intermetallics are atomically ordered crystalline compounds containing two or more main group and transition metals. In addition to their rich crystal chemistry, intermetallics display unique properties of interest for a variety of applications, including superconductivity, hydrogen storage, and catalysis. Because of the presence of metals with a wide range of reduction potentials, the controlled synthesis of intermetallics can be difficult. Recently, soft chemical syntheses such as the modified polyol and ship-in-a-bottle methods have helped advance the preparation of these materials. However, phase-segregated products and complex multistep syntheses remain common. Here, we demonstrate the use of heterobimetallic single-source precursors for the synthesis of 10-15 and 11-15 binary intermetallics. The coordination environment of the precursor, as well as the exact temperature used play a critical role in determining the crystalline intermetallic phase that is produced, highlighting the potential versatility of this approach in the synthesis of a variety of compounds. Furthermore, we show that a recently developed novel plasma-processing technique is successful in removing the surface graphitic carbon observed in some of the prepared compounds. This new single-source precursor approach is a powerful addition to the synthesis of atomically ordered intermetallic compounds and will help facilitate their further study and development for future applications.

Colloidal metal halide perovskite nanocrystals (NCs) with chiral ligands are outstanding candidates as a circularly polarized luminescence (CPL) light source due to many advantages such as high photoluminescence quantum efficiency, large spin-orbit coupling, and extensive tunability

Metal halide perovskites feature crystalline-like electronic band structures and liquid-like physical properties. The crystal–liquid duality enables optoelectronic devices with unprecedented performance and a unique opportunity to chemically manipulate the structure with low energy input. In this work, we leverage the low formation energy of metal halide perovskites to demonstrate multicolor reversible chromism. We synthesized layered Ruddlesden-Popper FAn+1PbnX3n+1 (FA = formamidinium, X = I, Br; n = number of layers = 1, 2, 3 … ∞) and reversibly tune the dimensionality (n) by modulating the strength and number of H-bonds in the system. H-bonding was controlled by exposure to solvent vapor (solvatochromism) or temperature change (thermochromism), which shuttles FAX salt pairs between the FAn+1PbnX3n+1 domains and adjacent FAX “reservoir” domains. Unlike traditional chromic materials that only offer a single-color transition, FAn+1PbnX3n+1 films reversibly switch between multiple colors including yellow, orange, red, brown, and white/colorless. Each colored phase exhibits distinct optoelectronic properties characteristic of 2D superlattice materials with tunable quantum well thickness., Metal halide perovskites feature crystalline-like electronic band structures and liquid-like physical properties that allow chemical manipulation of the structure with low energy input. Here, the authors leverage the low formation energy of 2D metal halide perovskites to demonstrate films that reversibly switch between multiple colors using tunable quantum well thickness.

Organolead halide and mixed halide perovskites (CH3NH3PbX3, CH3NH3PbX3–nYn, X and Y = Cl–, Br–, or I–) are promising materials for photovoltaics and optoelectronic devices. 207Pb solid-state NMR spectroscopy has previously been applied to characterize phase segregation and halide ion speciation in mixed halide perovskites. However, NMR spectroscopy is an insensitive technique that often requires large sample volumes and long signal averaging periods. This is especially true for mixed halide perovskites, which give rise to extremely broad 207Pb solid-state NMR spectra. Here, we quantitatively compare the sensitivity of the various solid-state NMR techniques on pure and mixed halide organolead perovskites and demonstrate that both fast MAS and DNP can provide substantial gains in NMR sensitivity for these materials. With fast MAS and proton detection, high signal-to-noise ratio two-dimensional (2D) 207Pb–1H heteronuclear correlation (HETCOR) NMR spectra can be acquired in less than half an hour from only ca...

Hybrid lead perovskites containing a mixture of organic and inorganic cations and anions have led to solar cell devices with performance and stability that are better than those of their single-halide analogs. 207Pb solid-state nuclear magnetic resonance and single-particle photoluminescence spectroscopies show that the structure and composition of mixed-halide and likely other hybrid lead perovskites are much more complex than previously thought and are highly dependent on their synthesis. While a majority of reports in the area focus on the construction of photovoltaic devices, this Perspective focuses instead on achieving a better understanding of the fundamental chemistry and photophysics of these materials, because this will aid not only in constructing improved devices but also in generating new uses for these unique materials.

An optimized synthetic procedure for preparing photostable nanocrystalline methylammonium lead halide materials is reported. The procedure was developed by adjusting the lead halide to methylammonium/octylammonium halide precursor ratio. At a high precursor ratio (1:3), a blue-shifted photoinduced luminescence peak is measured at 642 nm for CH3NH3PbI3 with 0.01 to 12 mJ pulsed-laser irradiation. The appearance of this peak is reversible over 300 min upon blocking the irradiation. In order to determine if the peak is the result of a phase change, in situ x-ray diffraction measurements were performed. No phase change was measured with an irradiance that causes the appearance of the photoinduced luminescence peak. Luminescence microscpectroscopy measurements showed that the use of a lower precursor ratio (1:1.5) produces CH3NH3PbI3 and CH3NH3PbBr3 perovskites that are stable over 4 min of illumination. Given the lack of a measured phase change, and the dependence on the precursor ratio, the photoinduced luminesce peak may derive from surface trap states. The enhanced photostability of the resulting perovskite nanocrystals produced with the optimized synthetic procedure supports their use in stable optoelectronic devices.

Lead halide perovskites possess unique characteristics that are well-suited for optoelectronic and energy capture devices, however, concerns about their long-term stability remain. Limited stability is often linked to the methylammonium cation, and all-inorganic CsPbX3 (X=Cl, Br, I) perovskite nanocrystals have been reported with improved stability. In this work, the photostability and thermal stability properties of CsPbX3 (X=Cl, Br, I) nanocrystals were investigated by means of electron microscopy, X-ray diffraction, thermogravimetric analysis coupled with FTIR (TGA-FTIR), ensemble and single particle spectral characterization. CsPbBr3 was found to be stable under 1-sun illumination for 16 h in ambient conditions, although single crystal luminescence analysis after illumination using a solar simulator indicates that the luminescence states are changing over time. CsPbBr3 was also stable to heating to 250 °C. Large CsPbI3 crystals (34±5 nm) were shown to be the least stable composition under the same conditions as both XRD reflections and Raman bands diminish under irradiation; and with heating the γ (black) phase reverts to the non-luminescent δ phase. Smaller CsPbI3 nanocrystals (14±2 nm) purified by a different washing strategy exhibited improved photostability with no evidence of crystal growth but were still thermally unstable. Both CsPbCl3 and CsPbBr3 show crystal growth under irradiation or heat, likely with a preferential orientation based on XRD patterns. TGA-FTIR revealed nanocrystal mass loss was only from liberation and subsequent degradation of surface ligands. Encapsulation or other protective strategies should be employed for long-term stability of these materials under conditions of high irradiance or temperature.

Metal–semiconductor nanohybrids (or heterostructures), such as Au–CdS, have become an important class of materials because of their role in photochemical hydrogen production and in other catalytic reactions. Here we report the results of photophysical studies of the interactions of these particles with ATTO dyes (ATTO 590 and 655), which are used as fluorescent probes in a wide range of spectroscopic techniques, most notably super-resolution microscopies. The most important feature of the Au–CdS particles is that they provide the possibility of selective excitation at either their CdS or their Au domains, which absorb preferentially at wavelengths shorter or longer than 500 nm, respectively, thus making possible an excited-state charge transfer reaction from ATTO. Fluorescence quenching of ATTO is dominated by charge transfer to either the CdS domain (λex = 400 nm) or the Au domain (λex = 570 nm). This quenching is quantified by steady-state and time-resolved absorption and fluorescence measurements, and ...

In this invited paper, we highlight some of our most recent work on the synthesis of low dimensional nanomaterials. Current graduate students and members of our group present four specific case systems: Nowotny–Juza phases, nickel phosphides, germanium-based core/shells, and organolead mixed-halide perovskites. Each system is accompanied by commentary from the student involved, which explains the motivation behind their work, as well as a protocol detailing the key experimental considerations involved in their synthesis. We trust these and similar efforts will help further advance our understanding of the broader field of synthetic nanomaterials chemistry, while, at the same time, highlighting how important this area is to the development of new materials for technologically relevant applications.

Organolead mixed-halide perovskites such as CH3NH3PbX3–aX′a (X, X′ = I, Br, Cl) are interesting semiconductors because of their low cost, high photovoltaic power conversion efficiencies, enhanced moisture stability, and band gap tunability. Using a combination of optical absorption spectroscopy, powder X-ray diffraction (XRD), and, for the first time, 207Pb solid state nuclear magnetic resonance (ssNMR), we probe the extent of alloying and phase segregation in these materials. Because 207Pb ssNMR chemical shifts are highly sensitive to local coordination and electronic structure, and vary linearly with halogen electronegativity and band gap, this technique can provide the true chemical speciation and composition of organolead mixed-halide perovskites. We specifically investigate samples made by three different preparative methods: solution phase synthesis, thermal annealing, and solid phase synthesis. 207Pb ssNMR reveals that nonstoichiometric dopants and semicrystalline phases are prevalent in samples ma...

Many technologically relevant semiconductors contain toxic, heavily regulated (Cd, Pb, As), or relatively scarce (Li, In) elements and often require high manufacturing costs. We report a facile, general, low-temperature, and size tunable (4–28 nm) solution phase synthesis of ternary APnE2 semiconductors based on Earth-abundant and biocompatible elements (A = Na, Pn = Bi, E = S or Se). The observed experimental band gaps (1.20–1.45 eV) fall within the ideal range for solar cells. Computational investigation of the lowest energy superstructures that result from “coloring”, caused by mixed cation sites present in their rock salt lattice, agrees with other better-known members of this family of materials. Our synthesis unlocks a new class of low cost and environmentally friendly ternary semiconductors that show properties of interest for applications in energy conversion.