Search

The precision of the luting protocol plays a crucial role in the success and survival rate of porcelain laminate veneers (PLVs). This in vitro study aimed to evaluate the influence of different luting techniques on the positioning of PLVs through a novel, noninvasive, scanning-based technique. A total of 45 ceramic PLVs were milled and cemented on human tooth replicas. Specimens were divided into three groups of 15, each subjected to a different luting protocol: flowable composite (Group A), dual-cure resin cement (Group B), and preheated composite resin (Group C). After luting procedures, specimens were scanned, and every STL file was superimposed with the original tooth design in Geomagic Control X version 2022.1 software to assess linear (incisal, mid, cervical) and angular discrepancies. Statistical analysis was performed using one-way ANOVA, Tukey’s HSD tests, and regression analysis. ANOVA results showed no statistically significant differences for incisal (F = 0.327, p = 0.723), mid (F = 0.287, p = 0.752), cervical (F = 0.191, p = 0.827), and angular (F = 0.026, p = 0.975) measurements. Tukey’s HSD post hoc tests confirmed the lack of significant pairwise differences between groups. The study demonstrated that the type of luting agent used does not significantly impact the final position of PLVs. This suggests flexibility in the choice of luting agents without compromising the accuracy of PLV placement.

Abstract The aim of this study was to evaluate the antimicrobial efficacy of an air gas soft jet CAP for its potential use in removing oral biofilms, given that plasma-based technologies have emerged as promising methods in periodontology. Two types of biofilms were developed, one by Streptococcus mutans UA 159 bacterial strain and the other by a complex mixture of saliva microorganisms isolated from a patient with periodontitis. This latter biofilm was characterized via Next Generation Sequencing to determine the main bacterial phyla. The CAP source was applied at a distance of 6 mm for different time points. A statistically significant reduction of both CFU count and XTT was already detected after 60 s of CAP treatment. CLSM analysis supported CAP effectiveness in killing the microorganisms inside the biofilm and in reducing the thickness of the biofilm matrix. Cytotoxicity tests demonstrated the possible use of CAP without important side effects towards human gingival fibroblasts cell line. The current study showed that CAP treatment was able to significantly reduce preformed biofilms developed by both S. mutans and microorganisms isolated by a saliva sample. Further studies should be conducted on biofilms developed by additional saliva donors to support the potential of this innovative strategy to counteract oral pathogens responsible for periodontal diseases.

Objective: To investigate the therapeutic and prophylactic use of antibiotics in dentistry in two countries. Methods: This study used questionnaires to examine the prescribing habits of dentists in Italy (9th country in Europe for systemic antibiotic administration) and Albania an Extra European Union Country. A total of 1300 questionnaires were sent to Italian and Albanian dentists. Results: In total, 180 Italian and 180 Albanian dentists completed the questionnaire. Penicillin use was higher in Italy (96.6 %) than Albania (82.8 %). Only 26.1 % of Italian dentists and 32 % of Albanian dentists followed the national guidelines for antibiotic administration. Conclusions: Dentists tend to overprescribe antibiotics for treating existing conditions or as prophylaxis. They also highlighted a lack of adherence to established guidelines for antibiotic use. In addition, factors such as age, nationality, and sex appeared to influence the choice of antibiotics. Clinical significance: Recently, the growth of antibiotic-resistant bacteria has become a global concern. The authors of this article highlight how dentists often prescribe antibiotics without a real need. Limiting the use of antibiotics in this category may help mitigate antibiotic resistance.

Abstract Background One of the main factors for the osseointegration of dental implants is the development of an adequate soft tissue barrier, mainly composed by collagen, which protects the implant from bacterial development. The structural features of the peri-implant collagen are influenced by the implant components and, in particular, by the type of the surface. In the clinical practice, healing abutments are characterized by smooth surfaces, named machined. Recently, a new laser technique, Synthegra, has been developed to obtain a topography-controlled surface with micrometric regular pores that seems reducing the risk of peri-implantitis. Based on this background, this study aims investigating the structural organization and spatial distribution of collagen surrounding healing abutments characterized by laser-treated and machined surfaces. Methods Gingiva portions surrounding custom-made healing abutments (HA), characterized by alternated laser-treated and machined surfaces, were collected and analyzed by combining Fourier Transform InfraRed Imaging (FTIRI) spectroscopy, a non-invasive and high-resolution bidimensional analytical technique, with histological and multivariate analyses. Results Masson’s trichrome staining, specific for collagen, highlighted a massive presence of collagen in all the analyzed samples, evidencing a surface-related spatial distribution. The nature of collagen, investigated by the FTIRI spectroscopy, appeared more abundant close to the laser-treated surface, with a perpendicular disposition of the bundles respect to the HA; conversely, a parallel distribution was observed around the machined surface. A different secondary structure was also found, with a higher amount of triple helices and a lower quantity of random coils in collagen close to the laser treated surfaces. Conclusions FTIRI spectroscopy demonstrates that the use of a laser treated transmucosal surface can improve the morphological organization of the peri-implant collagen, which presents a distribution more similar to that of natural teeth. Trial registration: This trial is registered with ClinicalTrials.gov Identifier: (Registration Number: NCT05754970). Registered 06/03/2023, retrospectively registered, https://clinicaltrials.gov/show/NCT05754970 .

Abstract Background Today dental implants represent an effective therapy in case of partial or total edentulism, with an excellent success rate. Despite the results obtained, there may be biological or mechanical complications during the therapy, which lead to the loss of the implant. This systematic review aims to evaluate the current state of the art in the literature on techniques used for the removal of dental implants. Various aspects will be analyzed, such as the success of the technique, any complications, and the advantages and disadvantages of their use. Methods Two reviewers conducted a literature analysis (PubMed, Embase, Web of Science) of the last 20 years (2003–2023). The main criterion analyzed was the success of the technique, while secondary outcomes such as complications and risks of the technique were also analyzed. 258 articles were identified in the various search databases. 42 eligible articles were subsequently identified after an article screening. Only 18 full texts were subsequently included in the review. Results A total of 18 articles were selected and 1142 implants and 595 patients were included. The main techniques used were the Counter-Torque Ratchet Technique (CTRT), Piezoelectric bone surgery (PBS), trephine drills, carbide burs, Erbium, Chromium, Yttrium, Scandium, Gallium, Garnett (Er:Cr:YSGG) laser and carbon dioxide (CO2) laser. Combined uses of techniques have been identified such as: PBS and trephine burs or carbide burs, trephine burs with the use of a 3d-printed guide, CTRT and trephine burs. The technique with the highest success rate, less morbidity for the patient, and less removal of bone appears to be the CTRT. Conclusions The use of conservative techniques, especially CTRT, in bone removal is useful to allow for immediate implant placement in the removal area. However, further studies with a high sample size are needed to be performed on all techniques, particularly new randomized controlled trials (RCTs) that allow for the analysis of the success of alternative techniques such as Laser and Piezosurgery, which appear to be very promising.

Background and Objectives: Unfavorable intrabony defects (IBDs) are associated with the progression of periodontal disease and tooth loss. Growing scientific evidence has demonstrated the effectiveness of platelet concentrations in periodontal treatment. The aim of our study was to demonstrate the non-inferiority of an autogenous bone graft (ABG) associated with leukocyte- and platelet-rich fibrin (L-PRF) compared to ABG + Collagen Membrane in the treatment of IBDs. Material and Methods: Sixty-four patients with at least one IBD were randomly assigned to two groups: ABG+L-PRF and CM+ABG. Clinical and radiographic evaluations were performed at baseline and 12-month follow-up. Clinical attachment level (CAL), gingival recession (GR), probing pocket depth (PPD), and radiograph defect bone level (DBL) were compared between the two treatments. To evaluate the effectiveness of ABG+L-PRF, a non-inferiority margin of =1 mm (−1 mm for GR) was chosen; a second non-inferiority margin of =0.5 mm (−0.5 mm for GR) was set for clinical relevance. Results: At 12-month follow up, both treatments showed clinical and radiographic improvements. The 90% confidence intervals of the CM+ABG–L-PRF+ABG mean difference for CAL gain (−0.0564 mm [−0.316 to 0.203]), DBL gain (−0.433 mm [−0.721 to −0.145]), and PPD reduction (0.232 mm [0.015 to 0.449]) were below the 0.5 mm non-inferiority margin; the GR increase (0.255 mm [0.0645 to 0.445]) stayed above the −0.5 mm. Conclusions: the L-PRF+ABG treatment of unfavorable IBDs is non-inferior with respect to the CM+ABG therapy for CAL gain, but with a lower GR, a slightly higher PPD, and DBL gain.

This systematic review assessed to evaluate the potential correlation between oral health and air pollution. To the best of the authors’ knowledge, this is the first systematic review endeavoring to compare air pollution and oral health. A systematic search was performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-analyses) statement and employed the PICO(S) approach (Patient or Population, Intervention, Control or Comparison, Outcome, and Study types). The search was limited to English-language articles, and publications within a 15-year timeframe were included in the electronic search. A comprehensive search was conducted across PubMed, Scopus, Embase, and Web of Science databases, spanning the years 2008 to 2023, resulting in a total of 4983 scientific articles. A final selection of 11 scientific papers was made based on their study type and the specific air pollutants examined. The selected papers analyzed various air pollutants associated with health-related diseases, including Ozone, Nitrogen Dioxide, Nitrogen Monoxide, Carbon Monoxide, sulfur dioxide, and particulate matter. Three out of eleven of the reviewed studies assert a strong correlation between air pollutants and oral diseases, specifically periodontitis. However, the exact biological mechanisms underlying this correlation do not seem to be fully understood, indicating the need for further comprehensive investigation in this regard. Dentists can contribute to the collective effort by educating their patients about the oral health implications of air pollution, thereby supporting initiatives aimed at promoting environmental and health sustainability.

Abstract Background Dental implant is the principal treatment for edentulism and the healthiness of the peri-implant tissue has a pivotal role for its longterm success. In addition, it has been shown that also the topography of the healing abutment can influence the outcome of the restoration. The objective of this human clinical trial was to assess the impact of a novel laser-treated healing abutment on peri-implant connective tissue and extracellular matrix proteins compared to the conventional machined surface, which served as the control group. Methods During second surgical stage a customized healing abutment were inserted on 30 single dental implants. Healing abutments were realized with two alternated different surface (two side laser-treated surfaces and two side machined surfaces) in order to be considered both as test and control on the same implant and reduce positioning bias. Following the soft tissue healing period (30 ± 7 days) a 5 mm circular biopsy was retrieved. Immuno-histochemical and quantitative real-time PCR (qPCR) analyses were performed on Collagen, Tenascin C, Fibrillin I, Metalloproteinases (MMPs) and their inhibitor (TIMPs). 15 were processed for qPCR, while the other 15 were processed for immunohistochemical analysis. Paired t-test between the two groups were performed. A value of p

The goal of plastic periodontal surgery is to obtain complete root coverage, increasing gingival thickness (GT), a positive prognostic factor for gingival margin stability over time. The aim of this study was to compare the effectiveness of the Coronally Advanced Flap (CAF) in RT1 (GR; gingival recession with no loss of interproximal attachment) when associated with a connective tissue graft from the maxillary tuberosity (tCTG) or with leukocyte and platelet-rich fibrin (L-PRF) membranes in obtaining root coverage and increasing the thickness and width of the keratinized tissue, along with aesthetic improvement, taking into account a number of patient-related outcomes. Thirty patients with two adjacent RT1 GRs (GRs with no loss of interproximal attachment) were each treated using CAF associated with tCTG (15 patients) or L-PRF. The main outcome was a GT increase; secondary outcomes were keratinized tissue width (KT), gingival recession (GR), probing depth (PD), clinical attachment level (CAL), root coverage percentage (RC%), complete root coverage (CRC), and root coverage esthetic score (RES). Patient-reported outcomes were discomfort (D), dentine hypersensitivity (DH), patient-related esthetic score (PRES), and overall treatment satisfaction (OTS). After 12 months, clinical and patient-reported parameters did not show significant differences between groups, with the only exception being a GT gain, which was significantly greater in the CAF + tCTG group. Our results showed that both techniques were effective in treating RT1 GRs, with comparable patient-related outcomes. However, the use of tCTG produces significantly thicker tissue, covering the exposed root surface.

Abstract Periodontitis is one of the main frequent intraoral diseases. Pathogenesis triggers are the immune responses with pro-inflammatory cytokines production and non-coding RNAs expression. The purpose of the present study was to evaluate the involvement of selected miRNAs in various stages of periodontitis and their relationship with the levels of inflammatory mediators in gingival crevicular fluid (GCF). For this study, 36 subjects (21 with periodontal disease, 15 healthy controls) were selected with an age mean of 59.1 ± 3.7 years. Clinical parameters included plaque index, gingival index, sulcus bleeding index, pocket depth, and clinical attachment level. The GCF samples were taken using capillary paper. The levels of miRNAs in GCF were estimated using a Real-Time PCR and TNFα and IL-6 levels were assessed by enzyme-linked immunosorbent assay (ELISA). The results indicated that the miRNA-103a-3p, miRNA-23a-3p, miRNA-15a-5p, and miRNA-223-3p were significantly upregulated with respect to healthy controls. Significant differences were observed for miRNA-23a-3p, miRNA-103a-3p and miRNA-423-5p levels in accord with the disease stages. Inflammatory mediators evaluated in GCF correlate well with the clinical parameters and the severity of the periodontal disease. miRNAs can represent biomarkers of disease stage and can be investigated as a possible therapeutic target, as well as levels of TNFα and IL-6 may drive the disease progression by acting as prognostic markers.

Background and Objectives: Dental implants are recognized as an effective treatment in the management of edentulous patients; controversies surround the connection between the sufficiency of keratinized gingiva (KG) and peri-implant health. Maintaining an ample amount of peri-implant KG is crucial for minimizing gingival inflammation, highlighting the need for regular consideration of soft-tissue augmentation. Among the diverse periodontal plastic surgical procedures, the apically positioned flap (APF) is notable for its ability to enhance the width of keratinized tissue while minimizing patient morbidity. The aim of this study was to evaluate the effects of L-PRF on palatal wound healing and patient discomfort after surgery. Materials and Methods: Twenty patients with two adjacent submerged fixtures in the maxilla and buccal keratinized gingiva widths < 2 mm were treated with APF and L-PRF. Clinical evaluations were performed at 1, 2, 3, and 4 weeks post-surgery, focusing on parameters such as complete wound epithelialization (CWE), postoperative discomfort (D), changes in feeding habits (CFH), alteration of sensitivity (AS) around the wound area, and the consumption of analgesics. Results: Our data revealed CWE in 5 patients by the end of the second week, with the remaining 15 achieving CWE by the end of the third week. For D and CHF, a statistically significant improvement was recorded for all cases between the first and second weeks, as well as AS, although less substantial, by the third week. No significant changes were noted for AS over the initial two weeks. Conclusions: These findings suggest that L-PRF may enhance wound healing and decrease patient discomfort following APF for fixture uncovering.

Chlorhexidine digluconate (CHX) has shown the ability to significantly reduce inflammation and marginal bone loss (MBL) at the 1-year follow-up but limited data exist regarding its long-term efficacy in peri-implant stability. The objective was to compare the long-term effects (5 years of follow-up) of a placebo gel (16 patients in Group A) or a 0.20% CHX gel (15 patients in Group B) used at each previous surgical and prosthetic stage. Control visits were conducted in 2022, investigating the long-term effects by biological, radiological, and clinical evaluation. The data were statistically analyzed. The research achieved a 96.7% implant success rate over five years, but 41.9% of patients did not attend annual oral hygiene check-ups. The average MBL was 1.04 ± 0.39 mm, with no significant differences between the two groups. Notably, patients who attended regular periodontal check-ups experienced significantly less MBL than those who did not (p < 0.05). At five years, direct effects of CHX were absent, with both groups showing moderate bone loss. However, the results suggest that early disinfection could enhance both short- and long-term outcomes. In fact, patients with initial minor MBL due to use of CHX, preserve this advantage also after 5 years of follow-up. Additionally, the data underscore the importance of annual check-ups in early detection and management of biological complications.

Abstract Recent studies have focused their attention on conjunctivitis as one of the symptoms of coronavirus disease 2019 (COVID-19). Therefore, tear samples were taken from COVID-19 patients and the presence of SARS-CoV-2 was evidenced using Real Time reverse transcription polymerase chain reaction. The main aim of this study was to analyze mRNA expression in the tears of patients with COVID-19 compared with healthy subjects using Next Generation Sequencing (NGS). The functional evaluation of the transcriptome highlighted 25 genes that differ statistically between healthy individuals and patients affected by COVID-19. In particular, the NGS analysis identified the presence of several genes involved in B cell signaling and keratinization. In particular, the genes involved in B cell signaling were downregulated in the tears of COVID-19 patients, while those involved in keratinization were upregulated. The results indicated that SARS-CoV-2 may induce a process of ocular keratinization and a defective B cell response.

Removable partial dentures (RPD) are still a valid alternative for the restoration of missing teeth. Additionally, implant-supported removable partial dentures (ISRPD) represent a valid alternative as it allows to avoid the use of clasps and increase stability. The objective of this study was to evaluate through an OHIP-14 questionnaire the level of satisfaction and quality of life (QoL) of patients treated before RPD and then with ISRPD. Twenty patients were rehabilitated with traditional RPDs, and after one year the prosthesis was modified into ISRPD, by inserting an implant and a ball or locator attachment. At the end of both phases, patients completed the Oral Health Impact Profile (OHIP-14) questionnaire. The collected data were statistically analyzed through the Wilcoxon U test, as overall OHIP score and difference between treatments. The mean of the OHIP summary (range from 0 to 56) in the RPD Group was 20.95 (±5.27). In the ISRPD Group it was 13.95 (±3.91), with a statistically significant difference (p < 0.05) between the two Groups. The same findings were highlighted for the differences between groups in every domain question. Patients showed significant improvements after rehabilitation in all areas of investigation, stating how the transformation of a removable prosthesis into an implant-supported one can improve patients’ QoL with benefits in chewing ability, aesthetics and self-satisfaction.

Clinical outcomes of dental restorations depend primarily on the choice of materials used, and nowadays, dental CAD-CAM (Computer-Aided Design Computer-Aided Manufacturing) materials have strongly changed daily clinical practice. The aim of this systematic review is to analyze CAD-CAM dental materials according to their mechanical properties and in relation to their clinical applications. A literature review was performed on PubMed, Scopus, Web of Knowledge, and the Cochrane Library. Articles addressing at least one of the following topics regarding dental materials for CAD-CAM systems: manufacturers, mechanical features, materials’ composition, optical properties, clinical indications, and/or outcomes were included in the review. A flowchart was performed as described in the PRISMA guidelines. Among the 564 articles found, 63 were analyzed and evaluated. Within the limitations of this systematic review, it can be concluded that CAD-CAM materials present a wide range of clinical applications due to their improved mechanical properties. Specifically, in addition to materials that have been in use for a long time (such as feldspathic ceramics), resin block composites can also be used for permanent restorations.

Background. Inflammatory responses have been associated with delayed oral mucosal wound healing and the pathogenesis of the periodontal disease. The invasion of microbes into the tissues and the establishment of a chronic infection may be due to impaired healing. The protracted inflammatory phase may delay wound healing and probably support tissue fibrosis and reduce tissue regeneration. Vanillin is a well-known natural compound with potential anti-inflammatory capacity. Hence, we hypothesized that Vanillin could accelerate wound healing reducing inflammation and especially cytokine production making the oral tissue repair process easier. Methods. Our hypothesis was tested using primary human gingival fibroblast (HGF) cell pretreated with Vanillin and primed with IL-1β, as inductor of proinflammatory environment. After 24 hours of treatments, the gene expression and production of IL-6, TNF-α, IL-8, COX-2, iNOS, and nitric oxide (NO) generation and the wound healing rate were determined. Results. In IL-1β-primed cells, preincubation with Vanillin reduced IL-6, IL-8, COX-2, and iNOS expression and NO release, compared to IL-1β-primed cells. Moreover, Vanillin determines the increased gene expression of nAChRα7, leading us to hypothesize a role of Vanillin in the activation of the cholinergic anti-inflammatory pathway. Furthermore, in presence of mechanical injury, the Vanillin preincubation, wound closure may be reducing the expression and release of IL-6 and TNF-α and upregulation of COX-2 and IL-8. Conclusion. Together, the results of this study highlight the anti-inflammatory and tissue repair ability of Vanillin in IL-1β-primed HGF. Therefore, Vanillin shows a potential therapeutic interest as an inflammatory modulator molecule with novel application in periodontal regeneration and oral health.

Transmission pathways of SARS-CoV-2 are aerosol, droplet and touching infected material. The diffusion of the virus contagion among people is easier in indoor location, but direct detection of SARS-CoV-2 in air or on surfaces is quite sparse, especially regarding public transport, while it would be important to know how and if it is safe to use them. To answer these questions we analysed the air and the surfaces most usually touched by passengers inside a city bus during normal operation, in order to understand the possible spreading of the virus and the effectiveness of the protective measures. The measurements were carried out across the last week of the lockdown and the first week when, gradually, all the travel restrictions were removed. The air and surface samples were analysed with the RT-PCR for the detection of SARS-CoV-2 virus. After two weeks of measurements and more than 1100 passenger travelling on the bus the virus was never detected both on surfaces and on air, suggesting that the precautions adopted on public transportation are effective in reducing the COVID-19 spreading.

Background: Squamous cell carcinoma is the most frequent malignant cancer of the oral cavity. Metastasis involvement is one of the most relevant prognostic factors in terms of survival probability. Patients with oral cancers often undergo extensive en bloc resective surgery of the mandible and maxilla, with or without cervical nodal dissection, based on the presence or occult risk of regional metastases. Several factors affect the choice of flap, to recover aesthetics and function. Case Presentation: The case of a 60-year-old man who underwent maxillectomy with neck dissection as well as a reconstruction with a combination of multiple vascularized free flaps is presented. Conclusions: The excellent integration of the free flaps and the total absence of complications led to a high-quality aesthetic and functional performance of the reconstruction obtained through two different flaps. More specifically, the fibular free flap for bone reconstruction allows a two-team approach and maintains an excellent vascularization, even in case of several osteotomies for the maxillary reconstruction as reported. In addition, the use of free radial forearm flap for soft tissue reconstruction permits to obtain long caliber vessels, thus facilitating surgery without repositioning of the patient during surgery and therefore, consequently reducing surgery times.

The efficacy of SARS-CoV-2 mRNA-based vaccines in preventing COVID-19 disease has been extensively demonstrated; however, it is of uttermost importance to acquire knowledge on the persistence of immune-protection both in terms of levels of neutralizing antibodies and specialized memory cells. This can provide important scientific basis for decisions on the need of additional vaccine doses and on when these should be administered thus resulting in an improvement in vaccination schedules. Here, we briefly report the changes in antibody levels and cellular immunity following BNT162b2 administration. We show an important fall in anti S1-Spike antibodies in BNT162b2 vaccinated subjects overtime, paralleled by a contextual consolidation of specific spike (S) T-cells, mainly of the CD8+ compartment. Contrariwise, CD4+ S-specific response shows a considerable interindividual variability. These data suggest that the well-known antibody drop in vaccinated subjects is replaced by memory cell consolidation that can protect from severe adverse effects of SARS-CoV-2 infection.

COVID-19 pandemic has hit people’s health, economy, and society worldwide. Great confidence in returning to normality has been placed in the vaccination campaign. The knowledge of individual immune profiles and the time required to achieve immunological protection is crucial to choose the best vaccination strategy. We compared anti-S1 antibody levels produced over time by BNT162b2 and AZD1222 vaccines and evaluated the induction of antigen-specific T-cells. A total of 2569 anti-SARS-CoV-2 IgG determination on dried blood spot samples were carried out, firstly in a cohort of 1181 individuals at random time-points, and subsequently, in an independent cohort of 88 vaccinated subjects, up to the seventeenth week from the first dose administration. Spike-specific T-cells were analysed in seronegative subjects between the two doses. AZD1222 induced lower anti-S1 IgG levels as compared to BNT162b2. Moreover, 40% of AZD1222 vaccinated subjects and 3% of BNT162b2 individuals resulted in seronegative during all the time-points, between the two doses. All these subjects developed antigen-specific T cells, already after the first dose. These results suggest that this test represents an excellent tool for a wide sero-surveillance. Both vaccines induce a favourable immune profile guaranteeing efficacy against severe adverse effects of SARS-CoV-2 infection, already after the first dose administration.

The purposes of this study were to evaluate the efficacy of water–airborne-particle abrasion (WAPA) as pre-etching procedure for tooth surfaces to increase bond strength, and to compare the survival rate of WAPA vs. non-WAPA glass–ceramic restorations with a 15-year follow-up. The occlusal surfaces of 20 human molars were sectioned and flattened. The prepared surfaces areas were subdivided into two parts: one received WAPA treatment (prophy jet handpiece with 50 µm aluminium oxide particles) followed by acid etching (37% phosphoric acid for 20 s/3-step etch-and-rinse); the other one was only acid-etched. In total, 108 specimens were obtained from the teeth, of which 80 were used to measure the micro-tensile bond strength (μTBS) in the WAPA (n = 40) and control (n = 40) groups, while the remaining specimens (n = 28) were investigated via SEM to evaluate the micromorphology and roughness (Ra) before and after the different treatment steps. The survival rate (SR) was performed on 465 glass–ceramic restorations (131 patients) comparing WAPA treatment (n = 183) versus non-WAPA treatment (n = 282). The bond strength was 63.9 ± 7.7 MPa for the WAPA group and 51.7 ± 10.8 MPa for the control group (p < 0.001). The Ra was 98 ± 24 µm for the enamel control group, 150 ± 35 µm for the enamel WAPA group, 102 ± 27 µm for the dentin control group and 160 ± 25 µm for the dentin WAPA group. The Ra increase from the WAPA procedure for enamel and dentin was statistically significant (p < 0.05). Under SEM, resin tags were present in both groups although in the WAPA they appeared to be extended in a 3D arrangement. The SR of the WAPA group (11.4 years) was 94%, while the SR of the non-WAPA group (12.3 years) was 87.6% (p < 0.05). The WAPA treatment using aluminium oxide particles followed by a 3-step etch-and-rinse adhesive system significantly improved bioadhesion with an increased bond strength of 23.6% and provided superior long-term clinical performance of glass–ceramic restorations.

It seems that during SARS-CoV-2 infection, total cholesterol, LDL-C, and HDL-C values decrease and lipids could play a fundamental role in viral replication. Moreover, it has been shown that SARS-CoV-2 infection could influence thyroid function. We performed a retrospective analysis of 118 hospitalized patients with COVID-19, comparing pre-infection lipid profile (53 patients) and thyroid-stimulating hormone (TSH) values (45 patients) to those measured on admission. Our aim was to evaluate whether SARS-CoV-2 infection could be involved in thyroid and lipid profile alterations and study possible correlations with disease severity and clinical outcome. Median baseline values at the admission time were: total cholesterol at 136.89 ± 42.73 mg/dL, LDL-C 81.53 ± 30.35 mg/dL, and HDL-C 32.36 ± 15.13 mg/dL; and triglycerides at 115.00 ± 40.45 mg/dL, non-HDL-C 104.53 ± 32.63 md/dL, and TSH 1.15 ± 1.08 μUI/mL. Median values of pre-infection total cholesterol, HDL-C, and TSH were significantly higher than those measured at the admission time (p value < 0.05). The C-reactive protein (CRP) negatively correlated with LDL-C (p = 0.013) and HDL-C (p = 0.05). Our data underline a possible impact of SARS-CoV-2 infection on thyroid function. Moreover it suggests a possible relation between COVID-19 and the lipid profile with a negative correlation between CRP, LDL-C, and HDL-C values, proposing the hypothesis that lipid lowering could follow the rising of the COVID-19 inflammatory state.

Background and Objectives: The objective of this study was to evaluate the association between periodontal disease and obstructive sleep apnea syndrome (OSAS). Materials and Methods: Electronic search using PubMed, Scopus, LILACS, and Cochrane library was carried out for randomized controlled trials, cohort, case-control, longitudinal and epidemiological studies on humans published from January 2009 until September 2020. The participants had to be male and female adults who were diagnosed with OSAS either by overnight polysomnography (carried out at a sleep laboratory or at home) or by a home sleep testing monitor (Apnea Risk Evaluation System). Methodological quality assessment was carried out using the Newcastle-Ottawa Quality Assessment Scale (NOS) for case-control studies while an adapted form of NOS was used for cross-sectional studies. Results: Ten studies fulfilled the inclusion criteria of our review, 5 were case-control studies, and 5 cross-sectional. Sample size ranged from 50 to 29,284 subjects, for a total of 43,122 subjects, 56% of them were male, their age ranged from 18 to 85 years old. The heterogeneity among the studies regarding the classification of periodontal disease, and the different methods for OSAS severity assessment, complicated the comparison among the studies. Conclusions: There is low evidence of a possible association between OSAS and periodontitis. The pathophysiological mechanism, cause-effect, or dose-response relationship are still unclear. Further studies are needed and should use a precise classification of OSAS subjects, while the new classification of periodontitis from the World Workshop of Chicago 2017 should be used for the periodontal assessment.

Curcumin, primary component of the spice turmeric extracted from the rhizomes of Curcuma longa, represents the major anti-oxidant and anti-inflammatory substance found in turmeric, acting thought various mechanisms not completely understood. Curcumin modulates cytokines, growth factors, transcription factors, inflammatory molecules and cell signaling pathways. During restorative dentistry practice, free resin monomers of 2-hydroxyethyl methacrylate (HEMA) propagate through dentin micro-channel and pulp into the bloodstream affecting cellular integrity. The study highlights the significance of application of curcumin bioactive component into liposomal formulations (CurLIP) to restore the homeostasis of dental pulp stem cells (hDPSCs) in response to 3 and 5 mmol L–1 HEMA treatment. Cell proliferation in combination with changes of the morphological features, proinflammatory cytokines secretion as Interleukin (IL) 6, IL8, Monocyte Chemoattractant Protein-1 (MCP1) and Interferon-gamma (IFNγ) were assayed along with the nuclear factor (NF)-kB, an inducible transcription factor involved in the activation of several cell processes associated to extracellular signal-regulated kinases (ERK) and posphorylated (p-) ERK pathway. Our results showed a decreased cell proliferation, morphological changes and upregulation of IL6, IL8, MCP1 and IFNγ in presence of 3 and 5 mmol L–1 HEMA treatment. CurLIP therapy in hDPSCs provokes an increase in cell proliferation and the block of inflammatory cytokines secretion through the inhibitory regulation of NFkB/ERK and pERK signaling cascade. The natural nanocarrier CurLIP influences numerous biochemical and molecular cascades causing anti-inflammatory properties in response to HEMA treatment in human dental pulp stem cells, representing an innovative endodontic formulation able to improve the quality of dental care with a major human community impact.

Implant abutment connection was described among the main causes of peri-implant bone resorption. The aim of this in vitro study was to test the coupling capacity, the surface modification of a new hybrid connection and the influence of repeated connection activations caused during the main clinical and laboratory phases. A total of 40 implant-abutment screw retained systems with 10°-conical and internal hexagon connection were tested. The connection was screwed, fixed to the universal test machine, removed the screw and a pull-out test was performed. Test was repeated five times in succession. Also Scanning Electron Microscopy (SEM) was used to detect microscopically surface modification. Analysis of variance and Tukey tests were used for the statistical analysis. Pull-out test reveals a mean value of 131.35 ± 16.52 Newton Centimeter (N·cm). For each single activation, results from first to fifth were: 113.9 ± 13.02, 126.1 ± 12.81, 138.11 ± 15.15, 138.8 ± 11.90 and 140 ± 12.99 N·cm. A statistically significant difference between the measurements and an increase in the removal force was shown. The collected data supports the use of this new type of connection, resulting in a very strong interface between implant and abutment. Also, repeated activation of connection can promote a better coupling of the implant-abutment interface.

Dentine pretreatment through sandblasting procedures has been widely studied but no curve test results are currently available. Thus, the aim herein was to in vitro compare the adhesive strength in sandblasted or not samples using a universal testing machine. Thirty -two bovine teeth were divided into two groups, namely test (n = 16 bars), sandblasting with aluminum oxide particles (50 µm) was performed before the adhesion procedures), and control (n = 16 bars), where no sandblasting procedure was performed. A bi-material curve test was used to evaluate the characteristics of the dentine pretreatment in terms of tensile stress and fracture strength. A scanning electron microscope (SEM) was used to analyze the fracture topography in the composite, bonding, dentin, and at the relative interfaces. The results demonstrated a statistically significant difference between the two groups in terms of tensile stress at maximum load showing values of 84.300 ± 51.342 MPa and 35.071 ± 16.609 MPa, respectively for test and control groups (p = 0.033). Moreover, a fracture strength test showed values of 18.543 ± 8.145 MPa for test and 8.186 ± 2.833 MPa for control group (p = 0.008). In conclusion, the sandblasting treatment of the dentine significantly influenced the mechanical resistance of the adhesion in this in vitro study.

Marginal bone loss (MBL) is a key factor in long-term implant success rate. Among the different factors that influence MBL, it is the different implant shoulder designs, such as scalloped or non-scalloped, which have been widely studied on screw retained but not on cemented retained implants. Thus, the aim of the present study was to evaluate the MBL around scalloped and non-scalloped cemented retained dental implants after 4 years of loading, in humans. A total of 15 patients were enrolled in the present study. A radiographic and clinical examination was performed after implant placement (T0) and after 4 years from it (T1). The results demonstrated a differential MBL (T1-T0) of 2.436 ± 1.103 mm and 1.923 ± 1.021 mm, respectively for test (scalloped) and control (non-scalloped) groups with a statistically significant difference between them. On the other hand, no statistically significant differences were found between the groups in terms of prosthetic complication and abutment decementation, whilst ceramic crowns chipping was shown in both groups. In conclusion, the use of a scalloped platform did not provide better results on the maintenance of MBL after 4 years follow-up. In this study, this probably was determined by multiple factors, among which was the subcrestal insertion of scalloped implants.

In recent years, Zirconia-reinforced Lithium Silicate ceramic (ZLS), combining lithium-silicate and zirconia features, has shown to have excellent mechanical and aesthetic characteristics. Thus, the aim of this study was to compare the fracture strength of ZLS single crowns cemented with two different cementation techniques. Twenty crowns were realised and cemented on teeth replicas achieved from an extracted premolar human tooth. The samples were divided into two groups of 10 specimens each, Glass-ionomeric cement (GIC) group and Self-Adhesive Resin Cement (ARC) group. The mechanical test was performed using a universal testing machine. The specimens were then evaluated with a scanning electron microscope (SEM) to identify for all crowns and related abutments the pattern of fracture after the breaking point. The data obtained were statistically analysed. The mean fracture toughness values and standard deviations (±SD) were 2227 ± 382 N and 3712 ± 319 N respectively for GIC and ARC groups. In fact, t-test showed a statistically significant difference between the two groups (p < 0.001). Moreover, the SEM results demonstrated portions of abutments still attached to the crown fragments in the ARC group, whilst these were not present in the GIC group. Within the limitations of this study, these results suggest the use of adhesive cementation for ZLS crowns, which significantly increase the compressive strength of ZLS restorations compared to GIC.

Adhesive restorations have been shown to guarantee excellent performance and longevity, although this comes with some disadvantages. Among these, the vulnerability of dentine to different agents has been widely evaluated. The aim of this study was to evaluate the possible penetration of impression materials into freshly cut dentine. Dentine from 27 teeth was impressed with polyether (Impregum Penta L) (nine teeth) and with polyvinyl siloxane (Aquasil Ultra LV) (nine teeth). The surface of nine teeth after the impressions were used as the control. Specifically, the extroflections caused by the imprinting of the dentinal tubules on the impression material, the so-called impression tags, were measured. Furthermore, the presence of the material inside the tubules was examined. Scanning electron microscopy analysis showed material tags for all of the experimental groups. The mean lengths (±SD) were 22.6 (±11.0) µm for polyether, 21.8 (±12.8) µm for polyvinyl siloxane and 11.3 (±7.0) µm for the tooth control, with mean diameters (±SD) of 2.8 (±0.5), 2.4 (±0.7) and 3.1 (±0.7) µm, respectively. Fractal analysis showed fractal dimensions of 1.78 (±0.03), 1.77 (±0.03) and 1.71 (±0.03), respectively. These data demonstrated that the impression materials can remain inside the dentinal tubules, which can adversely affect the adhesive procedures.

It was shown that AEDG peptide (Ala-Glu-Asp-Gly, Epitalon) regulates the function of the pineal gland, the retina, and the brain. AEDG peptide increases longevity in animals and decreases experimental cancerogenesis. AEDG peptide induces neuronal cell differentiation in retinal and human periodontal ligament stem cells. The aim of the study was to investigate the influence of AEDG peptide on neurogenic differentiation gene expression and protein synthesis in human gingival mesenchymal stem cells, and to suggest the basis for the epigenetic mechanism of this process. AEDG peptide increased the synthesis of neurogenic differentiation markers: Nestin, GAP43, β Tubulin III, Doublecortin in hGMSCs. AEDG peptide increased Nestin, GAP43, β Tubulin III and Doublecortin mRNA expression by 1.6−1.8 times in hGMSCs. Molecular modelling method showed, that AEDG peptide preferably binds with H1/6 and H1/3 histones in His-Pro-Ser-Tyr-Met-Ala-His-Pro-Ala-Arg-Lys and Tyr-Arg-Lys-Thr-Gln sites, which interact with DNA. These results correspond to previous experimental data. AEDG peptide and histones H1/3, H1/6 binding may be one of the mechanisms which provides an increase of Nestin, GAP43, β Tubulin III, and Doublecortin neuronal differentiation gene transcription. AEDG peptide can epigenetically regulate neuronal differentiation gene expression and protein synthesis in human stem cells.

Background: Many bone substitutes have been applied for sinus regeneration procedures, such as autogenous bone, inorganic bovine bone, porous and resorbable hydroxyapatite, tricalcium phosphate, bioactive glass, and blood clots. The aim of the present study was a tomographic, histological and histomorphometrical evaluation in humans, of specimens retrieved from sinuses augmented with MgHA/collagen-based scaffolds, after a healing period of 6 months.Materials and Methods: Eleven healthy patients and a total of 15 sinuses were included in this study. The maxillary sinuses were filled with commercial MgHA/collagen-based scaffolds (RegenOss) with a porous three-dimensional (3D) structure (Fin-Ceramica Faenza S.p.A., Faenza, Italy). These grafts have a composite design, that replicate the organization of bone structure, obtained by a technique in which a specific hybrid organic–inorganic composite is spontaneously built by a biological mechanism. The CBCT scans were done before the procedure, after the surgical protocol (T1), and 6 months after sinus surgery (T2) for implantology. Bone specimens were stored in 10% formalin solution, embedded in a glycolmethacrylate resin and sectioned by a high-precision diamond disc. Histologic and histomorphometric analysis were carried out to evaluate the graft reabsorption and bone healing.Results: The mean volume after graft elevation, calculated for each of the 15 sinuses, was 2,906 mm3 in the immediate postoperative period (5–7 days), ranging from 2,148.8 to 3,146.4 mm3. In the late postoperative period (6 months) it was 2,806.7 mm3, ranging from 2,010.9 to 3,008.9 mm3. The sinuses were completely healed and no residual MgHA/collagen-based scaffolds were visible. Osteoblasts appeared actively secreting bone matrix and marrow spaces contained moderate numbers of stromal cells and vascular network. Osteoblasts were observed actively secreting osteoid matrix. The tissues present in the samples were composed of 1.9 ± 1.9% of lamellar bone, 36 ± 1% of woven bone and 58 ± 3.8% of marrow spaces.Conclusion: Mg-MgHA/collagen-based scaffolds can successfully be used for sinus augmentation procedures.

Immediate dentin sealing (IDS) is an advantageous approach for realizing adhesive restorations, but it interferes with the polymerization of impression material due to the oxygen-inhibition layer (OIL), which leaves residues of impression material on the teeth. The aim of this study is to identify a clinical surface cleaning protocol after IDS in order to achieve defect-free impressions. Sixty extracted human teeth were cut to expose fresh dentin and the IDS protocol was performed. Samples were divided into six groups where different surface cleaning protocols were made before taking impressions: G1S and G1P groups, IDS and silicone (S) or polyether (P) impressions; G2S and G2P, treatment with prophy paste and impressions; G3S and G3P, final cleaning phase with surfactant agent and impressions. Teeth were evaluated with a scanning electron microscope to identify the areas (expressed in mm2) where residual impression material was present. The results demonstrate a reduction of residues in the G2 groups and the total disappearance in G3 groups with statistically significant differences between them. Superficial cleaning protocols with the prophy paste and surfactant agent lead to the elimination of the interaction with impression materials and OIL. These results suggest a safe clinical protocol for obtaining defect-free impressions after IDS.

The aim of this in vitro study was to evaluate the alterations of a titanium surface after treatment with two different types of ultrasonic tips: conventional steel versus an innovative copper alloy silver-plated one. Twenty smooth-surface, grade IV unalloyed titanium discs were divided into two groups. The discs were ultrasonically instrumented and the scaler was connected with a loading machine. The surface morphology was examined using scanning electron microscopy (SEM) and fractal analysis of lacunarity was calculated to highlight the alteration of the surface using the two different tips. The SEM analysis showed different degrees of surface roughness between the two types of scaler tips. Moreover, these observations demonstrated that the new tip showed fewer irregularities on the disc’s surface than the conventional steel tip. The statistical and fractal analysis showed a statistically significant difference between the two groups. Surface alterations of titanium induced by the conventional ultrasonic tips were much greater than those made by copper alloy silver plated tips. The presented results suggest that the use of this new ultrasonic tip may reduce the alterations on the implant surface during its use in dental practice.