Search

Peroxo-diiron(III) species are present in the active sites of many metalloenzymes that carry out challenging organic transformations. The reactivity of these species is influenced by various factors, such as the structure and topology of the supporting ligands, the identity of the axial and equatorial co-ligands, and the oxidation states of the metal ion(s). In this study, we aim to diversify the importance of equatorial ligands in controlling the reactivity of peroxo-diiron(III) species. As a model compound, we chose the previously published and fully characterized [(PBI) 2 (CH 3 CN)Fe III (μ-O 2 )Fe III (CH 3 CN)(PBI) 2 ] 4+ complex, where the steric effect of the four PBI ligands is minimal, so the labile CH 3 CN molecules easily can be replaced by different monodentate co-ligands (substituted pyridines and N-donor heterocyclic compounds). Thus, their effect on the electronic and spectral properties of peroxo-divas(III) intermediates could be easily investigated. The relationship between structure and reactivity was also investigated in the stoichiometric deformylation of PPA mediated by peroxo-diiron(III) complexes. It was found that the deformylation rates are influenced by the Lewis acidity and redox properties of the metal centers, and showed a linear correlation with the Fe III /Fe II redox potentials (in the range of 197 to 415 mV)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Inc.)

Unidirectional photochemical molecular motors can act as a power source for molecular machines. The motors operate by successive excited state isomerization and ground state helix inversion reactions, attaining unidirectionality from an interplay of steric strain and stereochemistry. Optimizing the yield of the excited state isomerization reaction is an important goal that requires detailed knowledge of excited state dynamics. Here, we investigate the effect of electron withdrawing and donating substituents on excited state structure and ultrafast dynamics in a series of newly synthesized first generation photochemical molecular motors. All substituents red-shift the absorption spectra, while some modify the Stokes shift and render the fluorescence quantum yield solvent polarity dependent. Raman spectra and density functional theory calculations reveal that the stretching mode of the C=C "axle" in the electronic ground state shows a small red-shift when conjugated with electron withdrawing substituents. Ultrafast fluorescence measurements reveal substituent and solvent polarity effects, with the excited state decay being accelerated by both polar solvent environment and electron withdrawing substituents. Excited state structural dynamics are investigated by fluorescence coherence spectroscopy and femtosecond stimulated Raman spectroscopy. The time resolved Raman measurements are shown to provide structural data specifically on the Franck-Condon excited state. The C=C localized modes have a different substituent dependence compared to the ground state, with the unsubstituted motor having the most red-shifted mode. Such measurements provide valuable new insights into pathways to optimize photochemical molecular motor performance, especially if they can be coupled with high-quality quantum molecular dynamics calculations., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Artificial molecular motors and machines constitute a critical element in the transition from individual molecular motion to the creation of collective dynamic molecular systems and responsive materials. The design of artificial light-driven molecular motors operating with high efficiency and selectivity constitutes an ongoing fundamental challenge. Here we present a highly versatile synthetic approach based on Rieche formylation that boosts the quantum yield of the forward photoisomerization reaction while reaching near-perfect selectivity in the steps involved in the unidirectional rotary cycle and drastically reducing competing photoreactions. This motor is readily accessible in its enantiopure form and operates with nearly quantitative photoconversions. It can easily be functionalized further and outperforms its direct predecessor as a reconfigurable chiral dopant in cholesteric liquid crystal materials., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Biomolecular polymerization motors are biochemical systems that use supramolecular (de-)polymerization to convert chemical potential into useful mechanical work. With the intent to explore new chemomechanical transduction strategies, here we show a synthetic molecular system that can generate forces via the controlled disassembly of self-organized molecules in a crystal lattice, as they are freely suspended in a fluid. An amphiphilic monomer self-assembles into rigid, high-aspect-ratio microcrystalline fibres. The assembly process is regulated by a coumarin-based pH switching motif. The microfibre crystal morphology determines the monomer reactivity at the interface, resulting in anisotropic etching. This effect exerts a directional pulling force on microscopic beads adsorbed on the crystal surface through weak multivalent interactions. We use optical-tweezers-based force spectroscopy to extract mechanistic insights into this process, quantifying a stall force of 2.3 pN (±0.1 pN) exerted by the ratcheting mechanism produced by the disassembly of the microfibres., (© 2024. The Author(s).)

The control over fluid flow achievable in microfluidic devices creates opportunities for applications in many fields. In simple microchannels, flow is purely laminar when one solvent is used, and hence, achieving reliable mixing is an important design consideration. Integration of structures, such as grooves, into the channels to act as static mixers is a commonly used approach. The mixing induced by these structures can be validated by determining concentration profiles in microfluidic channels following convergence of solvent streams from separate inlets. Spatially resolved characterisation is therefore necessary and requires in-line analysis methods. Here we report a line-focused illumination approach to provide operando , spatially resolved Raman spectra across the width of channels in the analysis of single- and multi-phase liquid systems and chemical reactions. A scientific complementary metal oxide semiconductor (sCMOS) sensor is used to overcome smearing encountered during spectral readout of images with CCD sensors. Isotopically labelled probes, in otherwise identical flow streams, show that z -confocality limits the spatial resolution and certainty as to the extent of mixing that can be achieved. These limitations are overcome using fast chemical reactions between reagents entering a microchannel in separate solvent streams. We show here that the progression of a chemical reaction, for which only the product is observable, is a powerful approach to determine the extent of mixing in a microchannel. Specifically resonance enhancement of Raman scattering from a product formed allows for determination of the true efficiency of mixing over the length and width of microchannels. Raman spectral images obtained by line-focused illumination show onset of mixing by observing the product of reagents entering from the separate inlets. Mixing is initially off-centre and immediately before the apex of the first groove of the static mixer, and then evolves along the entire width of the channel after a full cycle of grooves.

Redox non-innocent ligands hold the potential to expand the redox chemistry and activity of transition metal catalysts. The impact of the additional redox chemistry of phenol ligands in oxidation catalysis is explored here in the complex μ-oxido-diiron(III) polypyridyl (1) [(L)Fe(III)(μ-O)Fe(III)(L)](ClO 4 ) 2 (where HL is 2-(((di(pyridin-2-yl)methyl) (pyridin-2-ylmethyl) amino)methyl)phenol) and its tert-butyl substituted analog 2, in which each of the Fe(III) centers is coordinated to a phenolato moiety of the ligand. Complex 1 was shown earlier to catalyse the oxidation of benzyl alcohols to aldehydes with H 2 O 2 . In particular acid was found to accelerate the reactions by removal of a lag period before catalysis initiated. Here, we use reaction monitoring with resonance Raman, UV/vis absorption and EPR spectroscopy to show that under catalytic conditions, i.e. with excess H 2 O 2 , rapid (< 5 s) loss of the phenolato moiety occurs, resulting in the formation of an N4 ligated Fe(III) complex. This N4 coordinated complex forms a Fe(III)-OOH species, which is responsible for alcohol oxidation and over time a relatively stable oxido-bridged dinuclear Fe(III) complex forms as a resting state in the catalytic system. The main role of acid in the catalysis is shown to be to facilitate the initial coordination of H 2 O 2 by driving the formation of mononuclear complexes from 1 and 2. The data show that although the phenolato moiety imparts interesting redox properties on complex 1, it does not contribute directly to the oxidation catalysis observed with H 2 O 2 ., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Wesley Browne reports financial support was provided by European Research Council. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Unidirectional photochemically driven molecular motors (PMMs) convert the energy of absorbed light into continuous rotational motion. As such they are key components in the design of molecular machines. The prototypical and most widely employed class of PMMs is the overcrowded alkenes, where rotational motion is driven by successive photoisomerization and thermal helix inversion steps. The efficiency of such PMMs depends upon the speed of rotation, determined by the rate of ground state thermal helix inversion, and the quantum yield of photoisomerization, which is dependent on the excited state energy landscape. The former has been optimized by synthetic modification across three generations of overcrowded alkene PMMs. These improvements have often been at the expense of photoisomerization yield, where there remains room for improvement. In this perspective we review the application of ultrafast spectroscopy to characterize the excited state dynamics in PMMs. These measurements lead to a general mechanism for all generations of PMMs, involving subpicosecond decay of a Franck-Condon excited state to populate a dark excited state which decays within picoseconds via conical intersections with the electronic ground state. The model is discussed in the context of excited state dynamics calculations. Studies of PMM photochemical dynamics as a function of solvent suggest exploitation of intramolecular charge transfer and solvent polarity as a route to controlling photoisomerization yield. A test of these ideas for a first generation motor reveals a high degree of solvent control over isomerization yield. These results suggest a pathway to fine control over the performance of future PMMs.

The activation of alkyl hydroperoxides to generate radicals is a key step in the initiation of radical polymerisations in many industrial applications, not least protective coatings. Cobalt soaps (Co(ii) alkyl carboxylates) are highly effective catalysts under ambient conditions but viable alternatives based on less scarce catalysts are desirable, with especially iron and manganese catalysts showing potential. Manganese complexes of the ligand N , N ', N ″-trimethyl-1,4,7-triazacyclononane (tmtacn) are long established as catalysts for organic oxidations with H 2 O 2 , however their reactivity with alkyl hydroperoxides is less studied especially in apolar solvents. Here we show that this family of complexes can be employed as catalysts for the decomposition of alkyl hydroperoxides in apolar solvents such as styrene/methyl methacrylate mixtures and resins based on styrene/bisphenol-A based diglycidyl ether bismethacrylate (BADGE-MA). The progress of alkene polymerisation in crosslinking resins is followed by Raman spectroscopy to establish its dependence on the oxidation state of the manganese catalyst used, as gelation time and onset of autoacceleration are of particular interest for many applications. We show, through reaction progress monitoring with UV/vis absorption and Raman spectroscopy, that the stability of the manganese complexes in the resin mixtures has a substantial effect on curing progress and that the oxidation state of the resting state of the catalyst is most likely Mn(ii), in contrast to reactions with H 2 O 2 as oxidant in which the oxidation state of the resting state of catalyst is Mn(iii). Manganese complexes of tmtacn are shown to be capable initiators of alkene radical polymerisations, and their rich coordination and redox chemistry means that resin curing kinetics can potentially be tuned more readily than with cobalt alkyl carboxylates., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Molecular motors based on the overcrowded alkene motif convert light energy into unidirectional mechanical motion through an excited state isomerization reaction. The realization of experimental control over conversion efficiency in these molecular motors is an important goal. Here, we combine the synthesis of a novel "push-pull" overcrowded alkene motor with photophysical characterization by steady state and ultrafast time-resolved electronic spectroscopy. We show that tuning of the charge transfer character in the excited state has a dramatic effect on the photoisomerization yield, enhancing it to near unity in nonpolar solvents while largely suppressing it in polar solvents. This behavior is explained through reference to solvent- and substituent-dependent potential energy surfaces and their effect on conical intersections to the ground state. These observations offer new routes to the fine control of motor efficiency and introduce additional degrees of freedom in the synthesis and exploitation of light-driven molecular motors.

Electrochemistry and electrochemical reactions are increasingly important in the transition to a sustainable chemical industry. The electron transfer that drives such reactions takes place within nanometers of the electrode surface, and follow-up chemical reactions take place within the diffusion layer. Hence, understanding electrochemical reactions requires time-, potential-, and spatially resolved analysis. The confocal nature of Raman spectroscopy provides high spatial resolution, in addition to detailed information on molecular structure. The intrinsic weakness of nonresonant Raman scattering, however, is not sensitive enough for relatively minor changes to the solution resulting from reactions at the electrode interface. Indeed, the limit of detection is typically well above the concentrations used in electrochemical studies. Here, we show that surface-enhanced Raman scattering (SERS) and resonance Raman (rR) spectroscopy allow for spatially and time-resolved analysis of solution composition at (<1-2 nm) and near (within 5 μm) the electrode surface, respectively, in a selective manner for species present at low (<1 mM) concentrations. We show changes in concentration of species at the electrode surface, without the need for labels, specific adsorption, or resonance enhancement, using a SERS-active gold electrode prepared readily by electrochemical surface roughening. A combination of smooth and roughened gold electrodes is used to distinguish between surface and resonance enhancement using the well-known redox couples ferrocene and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). We discuss the impact of specific adsorption on the spectral analysis with the ruthenium(II) polypyridyl complex, [Ru(bpy) 3 ] 2+ . The dual function of the electrode (surface enhancement and electron transfer) in the analysis of solution processes is demonstrated with the reversible oxidation of TMA (4, N,N -trimethylaniline), where transient soluble species are identified in real time, with rapid spectral acquisition, making use of localized enhancement. We anticipate that this approach will find use in elucidating electro(catalytic) reactions at electrode interfaces.

Renewable polysaccharide feedstocks are of interest in bio-based food packaging, coatings and hydrogels. Their physical properties often need to be tuned by chemical modification, e.g. by oxidation using periodate, to introduce carboxylic acid, ketone or aldehyde functional groups. The reproducibility required for application on an industrial scale, however, is challenged by uncertainty about the composition of product mixtures obtained and of the precise structural changes that the reaction with periodate induces. Here, we show that despite the structural diversity of gum arabic, primarily rhamnose and arabinose subunits undergo oxidation, whereas (in-chain) galacturonic acids are unreactive towards periodate. Using model sugars, we show that periodate preferentially oxidises the anti 1,2-diols in the rhamnopyranoside monosaccharides present as terminal groups in the biopolymer. While formally oxidation of vicinal diols results in the formation of two aldehyde groups, only traces of aldehydes are observed in solution, with the main final products obtained being substituted dioxanes, both in solution and in the solid state. The substituted dioxanes form most likely by the intramolecular reaction of one aldehyde with a nearby hydroxyl group, followed by hydration of the remaining aldehyde to form a geminal diol. The absence of significant amounts of aldehyde functional groups in the modified polymer impacts crosslinking strategies currently attempted in the preparation of renewable polysaccharide-based materials., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Controlling molecular translation at the nanoscale is a key objective for development of synthetic molecular machines. Recently developed third generation photochemically driven molecular motors (3GMs), comprising pairs of overcrowded alkenes capable of cooperative unidirectional rotation offer the possibility of converting light energy into translational motion. Further development of 3GMs demands detailed understanding of their excited state dynamics. Here we use time-resolved absorption and emission to track population and coherence dynamics in a 3GM. Femtosecond stimulated Raman reveals real-time structural dynamics as the excited state evolves from a Franck-Condon bright-state through weakly-emissive dark-state to the metastable product, yielding new insight into the reaction coordinate. Solvent polarity modifies the photoconversion efficiency suggesting charge transfer character in the dark-state. The enhanced quantum yield correlates with suppression of a low-frequency flapping motion in the excited state. This detailed characterization facilitates development of 3GMs, suggesting exploitation of medium and substituent effects to modulate motor efficiency., (© 2023. The Author(s).)

The mechanism and the reactive species involved in the oxidation of alkenes, and alcohols with H 2 O 2 , catalysed by an in situ prepared mixture of a Mn II salt, pyridine-2-carboxylic acid and a ketone is elucidated using substrate competition experiments, kinetic isotope effect (KIE) measurements, and atom tracking with 18 O labelling. The data indicate that a single reactive species engages in the oxidation of both alkenes and alcohols. The primary KIE in the oxidation of benzyl alcohols is ca. 3.5 and shows the reactive species to be selective despite a zero order dependence on substrate concentration, and the high turnover frequencies (up to 30 s -1 ) observed. Selective 18 O labelling identifies the origin of the oxygen atoms transferred to the substrate during oxidation, and is consistent with a highly reactive, e. g ., [Mn V (O)(OH)] or [Mn V (O) 2 ], species rather than an alkylperoxy or hydroperoxy species., Competing Interests: The authors declare no conflict of interest., (© 2022 The Authors. ChemCatChem published by Wiley-VCH GmbH.)

The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host-guest phenomena in well-defined 3D solid materials. In this work, we detail the synthesis of a diamine-based light-driven molecular motor and its incorporation into a series of imine-based polymers and covalent organic frameworks (COF). We study structural and dynamic properties of the molecular building blocks and derived self-assembled solids with a series of spectroscopic, diffraction, and theoretical methods. Using an acid-catalyzed synthesis approach, we are able to obtain the first crystalline 2D COF with stacked hexagonal layers that contains 20 mol% molecular motors. The COF features a specific pore volume and surface area of up to 0.45 cm 3 g -1 and 604 m 2 g -1 , respectively. Given the molecular structure and bulkiness of the diamine motor, we study the supramolecular assembly of the COF layers and detail stacking disorders between adjacent layers. We finally probe the motor dynamics with in situ spectroscopic techniques revealing current limitations in the analysis of these new materials and derive important analysis and design criteria as well as synthetic access to new generations of motorized porous framework materials., Competing Interests: The authors declare no competing financial interests., (This journal is © The Royal Society of Chemistry.)

Thiophenol is a model compound used in the study of self-assembly of arylthiols on gold surfaces. In particular, changes in the surface-enhanced Raman scattering (SERS) spectra of these self-assembled monolayers (SAMs) with a change of conditions have been ascribed to, for example, differences in orientation with respect to the surface, protonation state, and electrode potential. Here, we show that potential-induced changes in the SERS spectra of SAMs of thiophenol on electrochemically roughened gold surfaces can be due to local pH changes at the electrode. The changes observed during the potential step and cyclic voltammetry experiments are identical to those induced by acid-base switching experiments in a protic solvent. The data indicate that the potential-dependent spectral changes, assigned earlier to changes in molecular orientation with respect to the surface, can be ascribed to changes in the pH locally at the electrode. The pH at the electrode can change as much as several pH units during electrochemical measurements that reach positive potentials where oxidation of adventitious water can occur. Furthermore, once perturbed by applying positive potentials, the pH at the electrode takes considerable time to recover to that of the bulk solution. It is noted that the changes in pH even during cyclic voltammetry in organic solvents can be equivalent to the addition of strong acids, such as CF 3 SO 3 H, and such effects should be considered in the study of the redox chemistry of pH-sensitive redox systems and potential-dependent SERS in particular., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption. The complex mechanism of light-gated breathing is established by a series of in situ diffraction and spectroscopic experiments, supported by quantum mechanical and molecular dynamic simulations. Unexpectedly, this study identifies a novel light-induced deformation mechanism of constrained azobenzene photoswitches relevant to the future design of light-responsive materials., (© 2022. The Author(s).)

Electron/proton transfers in water proceeding from ground/excited states are the elementary reactions of chemistry. These reactions of an iconic class of molecules─polypyridineRu(II)─are now controlled by capturing or releasing three of them with hosts that are shape-switchable. Reversible erection or collapse of the host walls allows such switchability. Some reaction rates are suppressed by factors of up to 120 by inclusive binding of the metal complexes. This puts nanometric coordination chemistry in a box that can be open or shut as necessary. Such second-sphere complexation can allow considerable control to be exerted on photocatalysis, electrocatalysis, and luminescent sensing involving polypyridineRu(II) compounds. The capturing states of hosts are symmetry-matched to guests for selective binding and display submicromolar affinities. A perching complex, which is an intermediate state between capturing and releasing states, is also demonstrated.

Controlling dynamic stereochemistry is an important challenge, as it is not only inherent to protein structure and function but often governs supramolecular systems and self-assembly. Typically, disulfide bonds exhibit stereodivergent behavior in proteins; however, how chiral information is transmitted to disulfide bonds remains unclear. Here, we report that hydrogen bonds are essential in the control of disulfide chirality and enable stereodivergent chirality transfer. The formation of S-S···H-N hydrogen bonds in solution can drive conformational adaption to allow intramolecular chirality transfer, while the formation of C=O···H-N hydrogen bonds results in supramolecular chirality transfer to form antiparallel helically self-assembled solid-state architectures. The dependence on the structural information encoded in the homochiral amino acid building blocks reveals the remarkable dynamic stereochemical space accessible through noncovalent chirality transmission.

Molecular recognition-driven self-assembly employing single-stranded DNA (ssDNA) as a template is a promising approach to access complex architectures from simple building blocks. Oligonucleotide-based nanotechnology and soft-materials benefit from the high information storage density, self-correction, and memory function of DNA. Here we control these beneficial properties with light in a photoresponsive biohybrid hydrogel, adding an extra level of function to the system. An ssDNA template was combined with a complementary photo-responsive unit to reversibly switch between various functional states of the supramolecular assembly using a combination of light and heat. We studied the structural response of the hydrogel at both the microscopic and macroscopic scale using a combination of UV-vis absorption and CD spectroscopy, as well as fluorescence, transmission electron, and atomic force microscopy. The hydrogels grown from these supramolecular self-assembly systems show remarkable shape-memory properties and imprinting shape-behavior while the macroscopic shape of the materials obtained can be further manipulated by irradiation., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Herein, we show that the photoactive complexes [(Cp)Fe(arene)] + (Cp = cyclopentadienyl; arene = C 6 H 6 , C 6 H 5 Me) act as latent catalysts that allow for photochemical control over the onset of alkyd paint curing, without the need for antiskinning agents such as the volatile 2-butanone oxime normally used to prevent curing during paint storage. The highly soluble neutral complexes [(Cp)Fe(Ch)] and [(Cp)Fe(Ch')] (Ch = cyclohexadienyl, Ch' = methylcyclohexadienyl) readily convert to the photoactive complexes [(Cp)Fe(arene)] + upon oxidation in alkyd, allowing the latter to be dosed in a wide range of concentrations. Infrared and Raman studies show similar spectral changes of the alkyd paint matrix as have been observed in alkyd curing mediated by well-known, industrially applied cobalt- and manganese-based catalyst Co(neodecanoate) 2 and [(Me 3 TACN) 2 Mn 2 (μ-OOCR) 3 ](OOCR). The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)] + system performs equally well as these cobalt- and manganese-based catalysts in terms of drying time and outperform the manganese catalyst by showing a hardness development (increase) similar to that of the cobalt-based catalyst. Based on electron paramagnetic resonance and light-activity studies, we propose that photolysis of [(Cp)Fe(arene)] + generates short-lived active Fe II species, explaining the desired latency. The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)] + alkyd curing systems presented herein are unique examples of intrinsically latent paint curing catalysts that (1) are based on an abundant and harmless transition metal (Fe), (2) do not require any antiskinning agents, and (3) show favorable performance in terms of drying times and hardness development., Competing Interests: The authors declare the following competing financial interest(s): J.B., J.F. and B.B. are inventors on PCT International Patent Application WO2021/001410 (to Akzo Nobel Coatings International B.V.), which claims the use of catalysts described in this work., (© 2022 The Authors. Published by American Chemical Society.)

The curing of bis-methacrylate-styrene resins initiated by the cobalt catalyzed decomposition of cumyl hydroperoxide is monitored at ambient temperatures in situ by EPR and Raman spectroscopy. EPR spectroscopy shows the appearance of organic radicals after ca. 1 h from initiation with an increase in intensity from both polystyrene and methacrylate based radical species over a further ca. 2 h period to reach a maximum spin concentration of ca. 2-3 mM. Alkene conversion to polymer was monitored by Raman spectroscopy in real time in situ with EPR spectroscopy and reveals that the appearance of the radical signals is first observed only as the conversion approaches its maximum extent (70% at room temperature), i.e. , the resin reaches a glass-like state. The radicals persist for several months on standing at room temperature. Flash frozen samples (77 K) did not show EPR signals within 1 h of initiation. The nature of the radicals responsible for the EPR spectra observed were explored by DFT methods and isotope labelling experiments (D 8 -styrene) and correspond to radicals of both methacrylate and polystyrene. Combined temperature dependent EPR and Raman spectroscopy shows that conversion increases rapidly upon heating of a cured sample, reaching full conversion at 80 °C with initially little effect on the EPR spectrum. Over time ( i.e. subsequent to reaching full conversion of alkene) there was a small but clear increase in the EPR signal due to the methacrylate based radicals and minor decrease in the signal due to the polystyrene based radicals. The appearance of the radical signals as the reaction reaches completion and their absence in samples flash frozen before polymerization has halted, indicate that the observed radicals are non-propagating. The formation of the radicals due to stress within the samples is excluded. Hence, the observed radicals are a representative of the steady state concentration of radicals present in the resin over the entire timespan of the polymerization. The data indicate that the lack of EPR signals is most likely due to experimental aspects, in particular spin saturation, rather than low steady state concentrations of propagating radicals during polymerization., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A multistable molecular switching system based on an anthracene-extended bis-thiaxanthylidene with three individually addressable states that can be interconverted by electrochemical, thermal, and photochemical reactions is reported. Besides reversible switching between an open-shell diradical- and a closed-shell electronic configuration, our findings include a third dicationic state and control by multiple actuators. This dicationic state with an orthogonal conformation can be switched electrochemically with the neutral open-shell triplet state with orthogonal conformation, which was characterized by EPR. The remarkably stable diradical shows kinetic stability as a result of a significant activation barrier for isomerization to a more stable neutral closed-shell folded geometry. We ascribe this activation barrier of Δ G ⧧ (293 K) = 25.7 kcal mol -1 to steric hindrance in the fjord region of the overcrowded alkene structure. The folded closed-shell state can be converted back to the diradical state by irradiation with 385 nm. The folded state can also be oxidized to the dicationic state. These types of molecules with multiple switchable states and in particular stable diradicals show great potential in the design of new functional materials such as memory devices, logic gates, and OFETs.

Controlling the transmission of thin films with external stimuli is an important goal in functional optical materials and devices. Tuning is especially challenging where both broad band (neutral density filtering) and spectrally varied (colour) transmission are required. The external control provided by photochemically driven switching, between transmission levels and colours, is functionally simple from a device perspective. The limits due to the spectral ranges of individual photochromic compounds can be overcome by combining several photochromes within one material or device. Here we show that a combination of photochromic molecular switches immobilised in a PMMA polymer matrix enables tuning of colour and transparency. We show that only a single excitation wavelength is required through the use of the primary inner filter effect and the layered construction of the films in which the photochromes nitrospiropyran (NSP), and nitrothiospiropyran (TSP) or 1,2-bis-terthienyl-hexafluorocyclopentene ( DTE ) are separated spatially. The approach taken circumvents the need to match photochemical quantum yields and thermal reactivity of the component photochromes. The photochemical switching of the films was characterised by UV/vis absorption spectroscopy and shows that switching rates and photostationary states are limited by inner filter effects rather than the intrinsic properties of photochromes, such as photochemical quantum yields and thermal stability. The photochemical behaviour and stability of the photochromes in solution and in the PMMA films were compared and the concentration range over which self-inhibition of photochemical switching occurs was established. The rate of photochemical switching and the difference in transmission between the spiropyran and merocyanine forms in solution enable prediction of the performance in the films and enable rational design of colour tuning ranges and responsivity in thin film filters., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The electrons that nature uses to reduce CO 2 during photosynthesis come from water oxidation at the oxygen-evolving complex of photosystem II. Molecular catalysts have served as models to understand its mechanism, in particular the O-O bond-forming reaction, which is still not fully understood. Here we report a Ru(IV) side-on peroxo complex that serves as a 'missing link' for the species that form after the rate-determining O-O bond-forming step. The Ru(IV) side-on peroxo complex (η 2 -1 iv -OO) is generated from the isolated Ru(IV) oxo complex (1 iv =O) in the presence of an excess of oxidant. The oxidation (IV) and spin state (singlet) of η 2 -1 iv -OO were determined by a combination of experimental and theoretical studies. 18 O- and 2 H-labelling studies evidence the direct evolution of O 2 through the nucleophilic attack of a H 2 O molecule on the highly electrophilic metal-oxo species via the formation of η 2 -1 iv -OO. These studies demonstrate water nucleophilic attack as a viable mechanism for O-O bond formation, as previously proposed based on indirect evidence., (© 2021. The Author(s), under exclusive licence to Springer Nature Limited.)

The complex [FeIII2(μ-O2)(L3)4(S)2]4+ (L3 = 2-(4-thiazolyl)benzimidazole, S = solvent) forms upon reaction of [FeII(L3)2] with H2O2 and is a functional model of peroxo-diiron intermediates invoked during the catalytic cycle of oxidoreductases. The spectroscopic properties of the complex are in line with those of complexes formed with N-donor ligands. [FeIII2(μ-O2)(L3)4(S)2]4+ shows both nucleophilic (aldehydes) and electrophilic (phenol, N,N-dimethylanilines) oxidative reactivity and unusually also electron transfer oxidation.

Oxidized starch can be efficiently prepared using H 2 O 2 as an oxidant and iron(III) tetrasulfophthalocyanine (FePcS) as a catalyst, with properties in the same range as those for commercial oxidized starches prepared using NaOCl. Herein, we performed an in-depth study on the oxidation of potato starch focusing on the mode of operation of this green catalytic system and its fate as the reaction progresses. At optimum batch reaction conditions (H 2 O 2 /FePcS molar ratio of 6000, 50 °C, and pH 10), a high product yield (91 wt %) was obtained with substantial degrees of substitution (DS COOH of 1.4 and DS CO of 4.1 per 100 AGU) and significantly reduced viscosity (197 mPa·s) by dosing H 2 O 2 . Model compound studies showed limited activity of the catalyst for C6 oxidation, indicating that carboxylic acid incorporation likely results from C-C bond cleavage events. The influence of the process conditions on the stability of the FePcS catalyst was studied using UV-vis and Raman spectroscopic techniques, revealing that both increased H 2 O 2 concentration and temperature promote the irreversible degradation of the FePcS catalyst at high pH. The rate and extent of FePcS degradation were found to strongly depend on the initial H 2 O 2 concentration where also the rapid decomposition of H 2 O 2 by FePcS occurs. These results explain why the slow addition of H 2 O 2 in combination with low FePcS catalyst concentration is beneficial for the efficient application in starch oxidation., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The bistability of molecular switches is an essential characteristic in their use as functional components in molecular-based devices and machines. For photoswitches, light-driven switching between two stable states proceeds via short-lived changes of the bond order in electronically excited states. Here, bistable switching of a ditertbutyl-substituted spiropyran photoswitch is instead demonstrated by oxidation and subsequent reduction in an overall four-state cycle. The spiropyran structure chosen has reduced sensitivity to the effect of secondary electrochemical processes such as H + production and provides transient access to a decreased thermal Z - E isomerization barrier in the one electron oxidized state, akin to that achieved in the corresponding photochemical path. Thus, we show that the energy needed for switching spiropyrans to the merocyanine form on demand, typically delivered by a photon, can instead be provided electrochemically. This opens up further opportunities for the utilization of spiropyrans in electrically controlled applications and devices.

The design of unidirectional photomolecular motors demands a critical understanding of an ultrafast photochemical isomerization. An intermediate dark excited state mediates the reaction via a conical intersection (CI) with the ground state, but a correlation between molecular structure and photoisomerization efficiency has remained elusive. Here femtosecond stimulated Raman spectroscopy captures vibrational spectra of the dark state in a set of molecular motors bearing different substituents. A direct correlation between isomerization quantum yield, dark state lifetime, and excited state vibrational spectrum is found. Electron withdrawing substituents lead to activity in lower frequency modes, which we correlate with a pyramidalization distortion at the ethylenic axle occurring within 100 fs. This structure is not formed with an electron donating substituent, where the axle retains double bond character. Further structural reorganization is observed and assigned to excited state reorganization and charge redistribution on the sub-picosecond time scale. The correlation of the dark state structure with photoconversion performance suggests guidelines for developing new more efficient motor derivatives.

Light-driven unidirectional molecular rotary motors have the potential to power molecular machines. Consequently, optimizing their speed and efficiency is an important objective. Here, we investigate factors controlling the photochemical yield of the prototypical unidirectional rotary motor, a sterically overcrowded alkene, through detailed investigation of its excited-state dynamics. An isoviscosity analysis of the ultrafast fluorescence decay data resolves friction from barrier effects and reveals a 3.4 ± 0.5 kJ mol -1 barrier to excited-state decay in nonpolar media. Extension of this analysis to polar solvents shows that this barrier height is a strong function of medium polarity and that the decay pathway becomes near barrierless in more polar media. Thus, the properties of the medium can be used as a route for controlling the motor's excited-state dynamics. The connection between these dynamics and the quantum yield of photochemical isomerization is probed. The photochemical quantum yield is shown to be a much weaker function of solvent polarity, and the most efficient excited-state decay pathway does not lead to a strongly enhanced quantum yield for isomerization. These results are discussed in terms of the solvent dependence of the complex multidimensional excited-state reaction coordinate.

Surface-enhanced Raman spectroscopy (SERS) is an emerging analytical technique for chemical analysis, which is favourable due to its combination of short measurement time, high sensitivity and molecular specificity. However, the application of SERS is still limited, largely because in real samples the analyte is often present in a complex matrix that contains micro/macro particles that block the probe laser, as well as molecular contaminants that compete for the enhancing surface. Here, we show a simple and scalable spray-deposition technique to fabricate SERS-active paper substrates which combine sample filtration and enhancement in a single material. Unlike previous spray-deposition methods, in which simple colloidal nanoparticles were sprayed onto solid surfaces, here the colloidal nanoparticles are mixed with hydroxyethyl cellulose (HEC) polymer before application. This leads to significantly improved uniformity in the distribution of enhancing particles as the film dries on the substrate surface. Importantly, the polymer matrix also protects the enhancing particles from air-oxidation during storage but releases them to provide SERS enhancement when the film is rehydrated. These SERS-paper substrates are highly active and a model analyte, crystal violet, was detected down to 4 ng in 10 μL of sample with less than 20% point-by-point signal deviation. The filter paper and HEC effectively filter out both interfering micro/macro particles and molecular (protein) contaminants, allowing the SERS-paper substrates to be used for SERS detection of thiram in mud and melamine in the presence of protein down to nanogram levels without sample pre-treatment or purification.

A series of iron(IV) oxo complexes, which differ in the donor (CH 2 py or CH 2 COO - ) cis to the oxo group, three with hemilabile pendant donor/second coordination sphere base/acid arms (pyH/py or ROH), have been prepared in water at pH 2 and 7. The ν Fe═O values of 832 ± 2 cm -1 indicate similar Fe IV ═O bond strengths; however, different reactivities toward C-H substrates in water are observed. HAT occurs at rates that differ by 1 order of magnitude with nonclassical KIEs ( k H /k D = 30-66) consistent with hydrogen atom tunneling. Higher KIEs correlate with faster reaction rates as well as a greater thermodynamic stability of the iron(III) resting states. A doubling in rate from pH 7 to pH 2 for substrate C-H oxidation by the most potent complex, that with a cis -carboxylate donor, [Fe IV O(Htpena)] 2+ , is observed. Supramolecular assistance by the first and second coordination spheres in activating the substrate is proposed. The lifetime of this complex in the absence of a C-H substrate is the shortest (at pH 2, 3 h vs up to 1.3 days for the most stable complex), implying that slow water oxidation is a competing background reaction. The iron(IV)═O complex bearing an alcohol moiety in the second coordination sphere displays significantly shorter lifetimes due to a competing selective intramolecular oxidation of the ligand.

Correction for 'The evolution of spiropyran: fundamentals and progress of an extraordinarily versatile photochrome' by Luuk Kortekaas et al., Chem. Soc. Rev., 2019, 48, 3406-3424, DOI: .

Molecular machines, switches, and motors enable control over nanoscale molecular motion with unprecedented precision in artificial systems. Integration of these compounds into robust material scaffolds, in particular nanostructured solids, is a fabrication strategy for smart materials with unique properties that can be controlled with external stimuli. Here, we describe a subclass of these structures, namely light-responsive porous materials metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and porous aromatic frameworks (PAFs) appended with molecular photoswitches. In this review, we provide an overview of a broad range of light-responsive porous materials focusing on potential applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The spiropyran family of photochromes are key components in molecular-based responsive materials and devices, e.g., as multiphotochromes, covalently coupled dyads, triads, etc. This attention is in no small part due to the change in properties that accompany the switch between spiropyran and merocyanine forms. Although the spiropyran is a single structural isomer, the merocyanine form represents a family of isomers ( TTT , TTC , CCT , etc.) and protonation states. Combining two spiropyrans into one compound increases the number of possible structures dramatically and the interaction between the units determines, which are impeded due to intramolecular quenching of excited states. Here, we show that the coupling of two spiropyran photochromes through their phenol units yields favorable interactions (crosstalk) between the components that provides access to species inaccessible with the component monospiropyran alone. Specifically, the ring opening of one spiropyran unit, which is thermally stable at -30 °C, prevents ring opening of the second spiropyran unit. Furthermore, whereas protonated E - and Z -monomerocyanines were previously shown to undergo thermal- and photo-equilibration, the corresponding protonated E - and Z - bimerocyanines are thermally stable and show one-way photoisomerization from the Z , Z - to an emissive E , E -bimerocyanine form. Subsequent deprotonation at room temperature resets the system to the bispiro ring-closed form, but deprotonation at -30 °C yields the otherwise inaccessible bimerocyanine form. This form is photochemically inert but undergoes a two-step thermal relaxation via the merocyanine-spiropyran form, showing that the connection at the phenol units provides sufficient intramolecular interaction to fine-tune the complex isomerization pathways of spiropyrans and demonstrating noncommutability in photo- and pH-regulated multistep isomerization pathways.

Establishing how life can emerge from inanimate matter is among the grand challenges of contemporary science. Chemical systems that capture life's essential characteristics-replication, metabolism and compartmentalization-offer a route to understanding this momentous process. The synthesis of life, whether based on canonical biomolecules or fully synthetic molecules, requires the functional integration of these three characteristics. Here we show how a system of fully synthetic self-replicating molecules, on recruiting a cofactor, acquires the ability to transform thiols in its environment into disulfide precursors from which the molecules can replicate. The binding of replicator and cofactor enhances the activity of the latter in oxidizing thiols into disulfides through photoredox catalysis and thereby accelerates replication by increasing the availability of the disulfide precursors. This positive feedback marks the emergence of light-driven protometabolism in a system that bears no resemblance to canonical biochemistry and constitutes a major step towards the highly challenging aim of creating a new and completely synthetic form of life.

Light activated photosensitizers generate reactive oxygen species (ROS) that interfere with cellular components and can induce cell death, e.g., in photodynamic therapy (PDT). The effect of cellular components and especially proteins on the photochemistry and photophysics of the sensitizers is a key aspect in drug design and the correlating cellular response with the generation of specific ROS species. Here, we show the complex range of effects of binding of photosensitizer to a multidrug resistance protein, produced by bacteria, on the formers reactivity. We show that recruitment of drug like molecules by LmrR (Lactococcal multidrug resistance Regulator) modifies their photophysical properties and their capacity to induce oxidative stress especially in 1O2 generation, including rose bengal (RB), protoporphyrin IX (PpIX), bodipy, eosin Y (EY), riboflavin (RBF), and rhodamine 6G (Rh6G). The range of neutral and charged dyes with different exited redox potentials, are broadly representative of the dyes used in PDT.

The visible-light-driven rotation of an overcrowded alkene-based molecular motor strut in a dual-function metal-organic framework (MOF) is reported. Two types of functional linkers, a palladium-porphyrin photosensitizer and a bispyridine-derived molecular motor, were used to construct the framework capable of harvesting low-energy green light to power the rotary motion. The molecular motor was introduced in the framework using the postsynthetic solvent-assisted linker exchange (SALE) method, and the structure of the material was confirmed by powder (PXRD) and single-crystal X-ray (SC-XRD) diffraction. The large decrease in the phosphorescence lifetime and intensity of the porphyrin in the MOFs upon introduction of the molecular motor pillars confirms efficient triplet-to-triplet energy transfer between the porphyrin linkers and the molecular motor. Near-infrared Raman spectroscopy revealed that the visible light-driven rotation of the molecular motor proceeds in the solid state at rates similar to those observed in solution.

Efficient photomolecular motors will be critical elements in the design and development of molecular machines. Optimisation of the quantum yield for photoisomerisation requires a detailed understanding of molecular dynamics in the excited electronic state. Here we probe the primary photophysical processes in the archetypal first generation photomolecular motor, with sub-50 fs time resolved fluorescence spectroscopy. A bimodal relaxation is observed with a 100 fs relaxation of the Franck-Condon state to populate a red-shifted state with a reduced transition moment, which then undergoes multi-exponential decay on a picosecond timescale. Oscillations due to the excitation of vibrational coherences in the S 1 state are seen to survive the ultrafast structural relaxation. The picosecond relaxation reveals a strong solvent friction effect which is thus ascribed to torsion about the C-C axle. This behaviour is contrasted with second generation photomolecular motors; the principal differences are explained by the existence of a barrier on the excited state surface in the case of the first-generation motors which is absent in the second generation. These results will help to provide a basis for designing more efficient molecular motors in the future., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Iron centers featuring thiolates in their metal coordination sphere (as ligands or substrates) are well-known to activate dioxygen. Both heme and non-heme centers that contain iron-thiolate bonds are found in nature. Investigating the ability of iron-thiolate model complexes to activate O 2 is expected to improve the understanding of the key factors that direct reactivity to either iron or sulfur. We report here the structural and redox properties of a thiolate-based dinuclear Fe complex, [Fe II 2 (LS) 2 ] (LS 2- = 2,2'-(2,2'-bipyridine-6,6'-iyl)bis(1,1-diphenylethanethiolate)), and its reactivity with dioxygen, in comparison with its previously reported protonated counterpart, [Fe II 2 (LS)(LSH)] + . When reaction with O 2 occurs in the absence of protons or in the presence of 1 equiv of proton (i.e., from [Fe II 2 (LS)(LSH)] + ), unsupported μ-oxo or μ-hydroxo Fe III dinuclear complexes ([Fe III 2 (LS) 2 O] and [Fe III 2 (LS) 2 (OH)] + , respectively) are generated. [Fe III 2 (LS) 2 O], reported previously but isolated here for the first time from O 2 activation, is characterized by single crystal X-ray diffraction and Mössbauer, resonance Raman, and NMR spectroscopies. The addition of protons leads to the release of water and the generation of a mixture of two Fe-based "oxygen-free" species. Density functional theory calculations provide insight into the formation of the μ-oxo or μ-hydroxo Fe III dimers, suggesting that a dinuclear μ-peroxo Fe III intermediate is key to reactivity, and the structure of which changes as a function of protonation state. Compared to previously reported Mn-thiolate analogues, the evolution of the peroxo intermediates to the final products is different and involves a comproportionation vs a dismutation process for the Mn and Fe derivate, respectively.

A one-pot multi-step method for the oxidative cleavage of alkenes to aldehydes/ketones under ambient conditions is described as an alternative to ozonolysis. The first step is a highly efficient manganese catalyzed epoxidation/ cis -dihydroxylation of alkenes. This step is followed by an Fe(III) assisted ring opening of the epoxide (where necessary) to a 1,2-diol. Carbon-carbon bond cleavage is achieved by treatment of the diol with sodium periodate. The conditions used in each step are not only compatible with the subsequent step(s), but also provide for increased conversion compared to the equivalent reactions carried out on the isolated intermediate compounds. The described procedure allows for carbon-carbon bond cleavage in the presence of other alkenes, oxidation sensitive moieties and other functional groups; the mild conditions (r.t.) used in all three steps make this a viable general alternative to ozonolysis and especially for use under flow or continuous batch conditions., (© 2019 The Authors. Published by Wiley‐VCH Verlag GmbH & Co. KGaA.)

Lewis acid (LA) activation by coordination to metal oxido species has emerged as a new strategy in catalytic oxidations. Despite the many reports of enhancement of performance in oxidation catalysis, direct evidence for LA-catalyst interactions under catalytically relevant conditions is lacking. Here, we show, using the oxidation of alkenes with H 2 O 2 and the catalyst [Mn 2 (μ-O) 3 (tmtacn) 2 ](PF 6 ) 2 ( 1 ), that Lewis acids commonly used to enhance catalytic activity, e.g., Sc(OTf) 3 , in fact undergo hydrolysis with adventitious water to release a strong Brønsted acid. The formation of Brønsted acids in situ is demonstrated using a combination of resonance Raman, UV/vis absorption spectroscopy, cyclic voltammetry, isotope labeling, and DFT calculations. The involvement of Brønsted acids in LA enhanced systems shown here holds implications for the conclusions reached in regard to the relevance of direct LA-metal oxido interactions under catalytic conditions.

The Fe III /Fe II redox potentials for [Fe(tpen)] 2+/3+ , [Fe(tpena)] +/2+ , and [Fe(tpenO)] +/2+ ( N -R- N , N ' ,N '-tris(2-pyridylmethyl)ethane-1,2-diamine, where R = CH 2 C 6 H 4 N, CH 2 COO - , CH 2 CH 2 O - , respectively) span 470 mV with the oxidation potentials following the order [Fe II (tpenO)] + (MeOH) < [Fe II (tpena)] + (MeCN) < [Fe II (tpen)] 2+ (MeCN). In their +3 oxidation states the complexes react with 1 equiv of H 2 O 2 to give the purple [Fe III (OOH)(HL)] n + ( n = 2 for L = tpena, tpenO; n = 3 for L = tpen). A pyridine arm is decoordinated in these complexes, furnishing a second coordination sphere base which is protonated at ambient pH. The lifetimes of these transient species depend on how readily the substrate (sometimes the solvent) is oxidized and reflect the trend in both the O-O bond lability and oxidizing potency of the putative iron-based oxidant derived from the iron(III) peroxides. In methanol solution, [Fe III (tpenO)] 2+ and [Fe III (tpena)] 2+ exist in their Fe(III) states and hence the formation of [Fe III (OOH)(Htpena)] 2+ and [Fe III (OOH)(HtpenO)] 2+ is instantaneous. This is in contrast to the short lag time that occurs before adduct formation between [Fe II (tpen)] 2+ and H 2 O 2 due to the requisite prior oxidation of the solution-state iron(II) complex to its iron(III) state. Stabilization of the +3 iron oxidation state in the resting state catalysts affords complexes that activate H 2 O 2 more readily with the consequence of higher yields in the oxidation of the C-H bonds using H 2 O 2 as terminal oxidant. The presence of a cis monodentate carboxylato donor increases the rate of oxidation by hydrogen atom transfer in comparison to the systems with an alkoxo or pyridine in this position. Competing with substrate oxidation is the oxidative modification of the alkoxido group in [Fe III (tpenO)] 2+ , converting it to a carboxylato group in the presence of H 2 O 2 : in effect, transforming tpenO to tpena.