Search

The Best Available Techniques (BAT) Reference Document (BREF) on Surface Treatment using Organic Solvents including Preservation of Wood and Wood Products with Chemicals is part of a series of documents presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and – where necessary – update BAT reference documents as required by Article 13(1) of Directive 2010/75/EU on Industrial Emissions (the Directive). This document is published by the European Commission pursuant to Article 13(6) of the Directive. The BREF on Surface Treatment Using Organic Solvents including Preservation of Wood and Wood Products with Chemicals covers the surface treatment of substances, objects or products using organic solvents as well as the preservation of wood and wood products using chemicals as specified in Sections 6.7 and 6.10 of Annex I to Directive 2010/75/EU respectively. Important issues for the implementation of Directive 2010/75/EU in the surface treatment using organic solvents (STS) and the wood preservation with chemicals (WPC) sectors are emissions to air and water as well as energy and water consumption. Chapter 1 provides general information on the STS sector and on the main environmental issues associated with their use. Chapters 2 to 14 give the applied processes, current emission and consumption levels, techniques to consider in the determination of BAT for the STS sectors that are covered by these chapters. Chapter 15 provides general information, applied processes, current emission and consumption levels, techniques to consider in the determination of BAT for the wood preservation sector. Chapter 16 provides thumbnail descriptions of additional STS sectors, for which a data collection via questionnaires has not been carried out. General techniques to consider in the determination of BAT (i.e. those techniques to consider that are widely applied in the STS sector) are reported in Chapter 17. Chapter 18 presents the BAT conclusions as defined in Article 3(12) of the Directive, both general and sector-specific. Chapter 19 provides the emerging techniques for the STS and WPC sectors. Concluding remarks and recommendations for future work are presented in Chapter 20., JRC.B.5-Circular Economy and Industrial Leadership

The Best Available Techniques (BAT) Reference Document (BREF) for the Food, Drink and Milk Industries is part of a series of documents presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and – where necessary – update BAT reference documents as required by Article 13(1) of Directive 2010/78/EU on Industrial Emissions (the Directive). This document is published by the European Commission pursuant to Article 13(6) of the Directive. The BREF for the Food, Drink and Milk Industries covers the treatment and processing, other than exclusively packaging, of the animal and/or vegetable raw materials, whether previously processed or unprocessed, intended for the production of food or feed, as specified in Section 6.4 (b) of Annex I to Directive 2010/75/EU. Important issues for the implementation of Directive 2010/75/EU in the food, drink and milk (FDM) sector are emissions to water, energy and water consumption. Chapter 1 provides general information on the FDM sector and on the industrial processes and techniques used within this sector. Chapter 2 provides information on the common industrial processes, abatement systems and general techniques that are used across the FDM sector. General techniques to consider in the determination of BAT (i.e. those techniques to consider that are widely applied in the FDM sector) are reported in Chapter 2. Chapters 3 to 15 give the applied processes, current emission and consumption levels, techniques to consider in the determination of BAT and emerging techniques for the FDM sectors that are covered by these chapters. Chapter 16 provides thumbnail descriptions of additional FDM sectors, for which a data collection via questionnaires has not been carried out. Chapter 17 presents the BAT conclusions as defined in Article 3(12) of the Directive, both general and sector-specific. Concluding remarks and recommendations for future work are presented in Chapter 18., JRC.B.5-Circular Economy and Industrial Leadership

The monitoring of emissions to air and water represents an important element in preventing and reducing pollution from industrial installations and in ensuring a high level of protection of the environment taken as a whole. Therefore, the Industrial Emissions Directive 2010/75/EU (IED) addresses the monitoring of emissions in a number of instances. This JRC Reference Report on Monitoring (ROM) summarises information on the monitoring of emissions to air and water from IED installations, thereby providing practical guidance for the application of the Best Available Techniques (BAT) conclusions on monitoring in order to help competent authorities to define monitoring requirements in the permits of IED installations. Moreover, the information and recommendations provided by this document may help the Technical Working Groups (TWGs) to derive BAT conclusions during the drawing up and review of BAT Reference documents (BREFs)., JRC.B.5-Circular Economy and Industrial Leadership

The BAT Reference Document (BREF) for Large Combustion Plants is part of a series of documents presenting the results of an exchange of information between the EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review, and -where necessary- update BAT reference documents as required by Article 13(1) of Directive 2010/75/EU on Industrial Emissions. This document is published by the European Commission pursuant to Article 13(6) of the Directive. This BREF for Large Combustion Plants concerns the following activities specified in Annex I to Directive 2010/75/EU: - 1.1: Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more. - 1.4: Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant. - 5.2: Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. In particular, this document covers upstream and downstream activities directly associated with the aforementioned activities including the emission prevention and control techniques applied. The fuels considered in this document are any solid, liquid and/or gaseous combustible material including: - solid fuels (e.g. coal, lignite, peat); - biomass (as defined in Article 3(31) of Directive 2010/75/EU); - liquid fuels (e.g. heavy fuel oil and gas oil); - gaseous fuels (e.g. natural gas, hydrogen-containing gas and syngas); - industry-specific fuels (e.g. by-products from the chemical and iron and steel industries); - waste except mixed municipal waste as defined in Article 3(39) and except other waste listed in Article 42(2)(a)(ii) and (iii) of Directive 2010/75/EU. Important issues for the implementation of Directive 2010/75/EU in the Large Combustion Plants sector are the emissions to air of nitrogen oxides, sulphur dioxide, hydrogen chloride and fluoride, organic compounds, dust, and metals including mercury; emissions to water resulting especially from the use of wet abatement techniques for the removal of sulphur dioxide from the flue gases; resource efficiency and especially energy efficiency. This BREF contains 12 Chapters. Chapters 1 and 2 provide general information on the Large Combustion Plants industrial sector and on the industrial processes used within this sector. Chapter 3 provides data and general information concerning the environmental performance of installations within the sector in terms of water consumption, the generation of waste and general techniques used within this sector. It also describes in more detail the general techniques to prevent or, where this is not practicable, to reduce the environmental impact of installations in this sector that were considered in determining the BAT. Chapters 4 to 9 provide the following information given below on specific combustion processes (gasification, combustion of solid fuel, combustion of liquid fuel, combustion of gaseous fuel, multi-fuel combustion and waste co-incineration). Chapter 10 presents the BAT conclusions as defined in Article 3(12) of the Directive. Chapter 11 presents information on 'emerging techniques' as defined in Article 3(14) of the Directive. Concluding remarks and recommendations for future work are presented in Chapter 12., JRC.B.5-Circular Economy and Industrial Leadership

The Best Available Techniques (BAT) Reference Document (BREF) for the Production of Large Volume Organic Chemicals is part of series of documents presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and – where necessary – update BAT reference documents as required by Article 13(1) of Directive 2010/78/EU on Industrial Emissions (the Directive). This document is published by the European Commission pursuant to Article 13(6) of the Directive. The BREF for the production of Large Volume Organic Chemicals concerns the production of the following organic chemicals, as specified in Section 4.1 of Annex I to Directive 2010/75/EU: a. simple hydrocarbons (linear or cyclic, saturated or unsaturated, aliphatic or aromatic); b. oxygen-containing hydrocarbons such as alcohols, aldehydes, ketones, carboxylic acids, esters and mixtures of esters, acetates, ethers, peroxides and epoxy resins; c. sulphurous hydrocarbons; d. nitrogenous hydrocarbons such as amines, amides, nitrous compounds, nitro compounds or nitrate compounds, nitriles, cyanates, isocyanates; e. phosphorus-containing hydrocarbons; f. halogenic hydrocarbons; g. organometallic compounds; k. surface-active agents and surfactants. This document also covers the production of hydrogen peroxide as specified in Section 4.2 (e) of Annex I to Directive 2010/75/EU; and the combustion of fuels in process furnaces/heaters, where this is part of the abovementioned activities. The production of the aforementioned chemicals is covered by this document when it is done in continuous processes where the total production capacity of those chemicals exceeds 20 kt/yr. While the main aim of the LVOC BREF is to facilitate reduction of emissions from chemical processes, other environmental issues - like energy efficiency, resource efficiency, wastes and residues - are also covered. This BREF contains 14 Chapters. Chapters 1 and 2 provide general information on the Large Volume Organics industrial sector and on generic industrial production processes used in this sector. Chapters 3 to 12 provide general information , applied processes and techniques, current emission and consumption levels, techniques to consider in determination of BAT and emerging techniques for various illustrative processes: lower olefins, aromatics, ethylbenzene and styrene, formaldehyde, ethylene oxide and ethylene glycols, phenol, ethanolamines, toluene diisocyanate and methylene diphenyl diisocyanate, ethylene dichloride and vinyl chloride monomer and hydrogen peroxide. Chapter 13 presents BAT conclusions as defined in Article 3(12) of the Directive. Concluding remarks and recommendations for future work are presented in Chapter 14., JRC.B.5-Circular Economy and Industrial Leadership

The BAT reference document (BREF) entitled 'Common Waste Water and Waste Gas Treatment/Management Systems in the Chemical Sector' forms part of a series presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and, where necessary, update BAT reference documents as required by Article 13(1) of the Directive 2010/75/EU on industrial emissions. This document is published by the European Commission pursuant to Article 13(6) of the Directive. This BREF for Common Waste Water and Waste Gas Treatment/Management Systems in the Chemical Sector concerns the activities specified in Sections 4 and 6.11 of Annex I to Directive 2010/75/EU, namely: - Section 4: Chemical industry; - Section 6.11: Independently operated treatment of waste water not covered by Council Directive 91/271/EEC and discharged by an installation undertaking activities covered under Section 4 of Annex I to Directive 2010/75/EU. This document also covers the combined treatment of waste water from different origins if the main pollutant load originates from the activities covered under Section 4 of Annex I to Directive 2010/75/EU. In particular, this document covers the following issues: - environmental management systems; - water saving; - waste water management, collection, and treatment; - waste management; - treatment of waste water sludge with the exception of incineration; - waste gas management, collection, and treatment; - flaring; - diffuse emissions of volatile organic compounds (VOCs) to air; - odour emissions; - noise emissions. Important issues for the implementation of Directive 2010/75/EU in the chemical industry are emissions to air and water. This BREF contains six chapters. Chapter 1 provides general information on waste water and waste gas. Chapter 2 provides data and information concerning the environmental performance of waste water treatment plants (WWTPs) at chemical sites. Chapter 3 describes in more detail the techniques to prevent or, where this is not practicable, to reduce the environmental impact of operating installations in this sector that were considered in determining the BAT. This information includes, where relevant, the environmental performance levels (e.g. emission and consumption levels) which can be achieved by using the techniques, the associated monitoring and the costs and the cross-media issues associated with the techniques. Chapter 4 presents the BAT conclusions as defined in Article 3(12) of the Directive. Chapter 5 presents information on 'emerging techniques' as defined in Article 3(14) of the Directive. Chapter 6 is dedicated to concluding remarks and recommendations for future work., JRC.B.5-Circular Economy and Industrial Leadership

The BAT reference document entitled ‘Production of Chlor-alkali’ forms part of a series presenting the results of an exchange of information between EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review and, where necessary, update BAT reference documents as required by Article 13(1) of the Directive 2010/75/EU on industrial emissions. This document is published by the European Commission pursuant to Article 13(6) of the Directive. This BREF for the production of chlor-alkali covers certain industrial activities specified in Sections 4.2(a) and 4.2(c) of Annex I to Directive 2010/75/EU, namely the production of chlor-alkali chemicals (chlorine, hydrogen, potassium hydroxide and sodium hydroxide) by the electrolysis of brine. In particular, this document covers the following processes and activities: - the storage of salt; - the preparation, purification and resaturation of brine; - the electrolysis of brine; - the concentration, purification, storage and handling of sodium/potassium hydroxide; - the cooling, drying, purification, compression, liquefaction, storage and handling of chlorine; - the cooling, purification, compression, storage and handling of hydrogen; - the conversion of mercury cell plants to membrane cell plants; - the decommissioning of mercury cell plants; - the remediation of chlor-alkali production sites. Important issues for the implementation of Directive 2010/75/EU in the chlor-alkali industry are the conversion and decommissioning of mercury cell plants, the conversion of asbestos diaphragm cell plants and the use of non-asbestos diaphragms, electricity consumption, and emissions of chlorine to air and water. The BREF contains seven chapters. Chapters 1 and 2 provide general information on the chlor-alkali industry and on the industrial processes and techniques used within this sector. Chapter 3 provides data and information concerning the environmental performance of installations in terms of current emissions, consumption of raw materials, water and energy, and generation of waste. Chapter 4 describes the techniques to prevent or reduce the environmental impact of installations in the sector. In Chapter 5 the BAT conclusions, as defined in Article 3(12) of the Directive, are presented for the chlor-alkali industry. Chapters 6 and 7 are dedicated to emerging techniques as well as to concluding remarks and recommendations for future work in the sector, respectively., JRC.J.5-Sustainable Production and Consumption

El éxito del proceso de Sevilla depende de la activa participación de los mejores expertos de la UE-28, en la calidad de la información, y en el alto grado de consenso conseguido. Lograr ese éxito no es sencillo, dado el elevado número de instituciones, intereses y personas involucrados. Con ánimo de promover una activa y eficaz participación de los miembros de los grupos técnicos de trabajo, se han recopilado unas recomendaciones al respecto., JRC.J.5-Sustainable Production and Consumption

Not applicable., JRC.J.5-Sustainable Production and Consumption