Search

This technique holds several advantages over contemporary techniques: It utilizes technology that is already deployed in the field, it offers a significant degree of generality, and so far it has displayed a very high-level of sensitivity without sacrificing accuracy. Validation is performed in the form of simulations based in the IEEE 13 Node System and non-linear fault models. Test results are encouraging, indicating potential for real-life applications., Comment: IEEE ISGT 2023

Underfrequency (UF) load shedding schemes are traditionally implemented in two ways: One approach is based on manual load shedding, with system operators requesting loads to be shed ahead of anticipated stressful operating conditions. Manual load shedding is usually done through phone calls. The second method is automatic load shedding via underfrequency relays. Using static settings, these schemes can be designed to operate in stages and drop previously identified loads. The main limitation of traditional load shedding schemes is that they are reactive and leave little room for optimized corrective actions. This work presents a proactive and automatic underfrequency load shedding solution for power systems. Measurements are captured via phasor measurement units (PMUs) at relatively low sampling rates of 30 Hz. These measurements are then processed by particle filters who predict the future state of the system's frequency. Based on these predictions excess load is determined and shed. Comparative case studies are performed in simulated environments. Easy-to-implement models, without hard-to-derive parameters, highlight potential aspects for real-life implementation., Comment: IEEE General Meeting 2023

This paper presents a model for detecting high-impedance faults (HIFs) using parameter error modeling and a two-step per-phase weighted least squares state estimation (SE) process. The proposed scheme leverages the use of phasor measurement units and synthetic measurements to identify per-phase power flow and injection measurements which indicate a parameter error through $\chi^2$ Hypothesis Testing applied to the composed measurement error (CME). Although current and voltage waveforms are commonly analyzed for high-impedance fault detection, wide-area power flow and injection measurements, which are already inherent to the SE process, also show promise for real-world high-impedance fault detection applications. The error distributions after detection share the measurement function error spread observed in proven parameter error diagnostics and can be applied to HIF identification. Further, this error spread related to the HIF will be clearly discerned from measurement error. Case studies are performed on the 33-Bus Distribution System in Simulink., Comment: Accepted for publication in 2023 IEEE ISGT North America. 5 pages, 6 figures

An important challenge for smart grid security is designing a secure and robust smart grid communications architecture to protect against cyber-threats, such as Denial-of-Service (DoS) attacks, that can adversely impact the operation of the power grid. Researchers have proposed using Software Defined Network frameworks to enhance cybersecurity of the smart grid, but there is a lack of benchmarking and comparative analyses among the many techniques. In this work, a distributed three-controller software-defined networking (D3-SDN) architecture, benchmarking and comparative analysis with other techniques is presented. The selected distributed flat SDN architecture divides the network horizontally into multiple areas or clusters, where each cluster is handled by a single Open Network Operating System (ONOS) controller. A case study using the IEEE 118-bus system is provided to compare the performance of the presented ONOS-managed D3-SDN, against the POX controller. In addition, the proposed architecture outperforms a single SDN controller framework by a tenfold increase in throughput; a reduction in latency of $>20\%$; and an increase in throughput of approximately $11\%$ during the DoS attack scenarios., Comment: This work has been submitted to the 2023 IEEE Power & Energy Society General Meeting for possible publication. 5 pages, 4 figures

Distribution systems of the future smart grid require enhancements to the reliability of distribution system state estimation (DSSE) in the face of low measurement redundancy, unsynchronized measurements, and dynamic load profiles. Micro phasor measurement units ($\mu$PMUs) facilitate co-synchronized measurements with high granularity, albeit at an often prohibitively expensive installation cost. Supervisory control and data acquisition (SCADA) measurements can supplement $\mu$PMU data, although they are received at a slower sampling rate. Further complicating matters is the uncertainty associated with load dynamics and unsynchronized measurements-not only are the SCADA and $\mu$PMU measurements not synchronized with each other, but the SCADA measurements themselves are received at different time intervals with respect to one another. This paper proposes a non-linear state estimation framework which models dynamic load uncertainty error by updating the variances of the unsynchronized measurements, leading to a time-varying system of weights in the weighted least squares state estimator. Case studies are performed on the 33-Bus Distribution System in MATPOWER, using Ornstein-Uhlenbeck stochastic processes to simulate dynamic load conditions., Comment: This work has been submitted to the 2023 IEEE Power & Energy Society General Meeting for possible publication. 5 pages, 4 figures

Smart Grid (SG) research and development has drawn much attention from academia, industry and government due to the great impact it will have on society, economics and the environment. Securing the SG is a considerably significant challenge due the increased dependency on communication networks to assist in physical process control, exposing them to various cyber-threats. In addition to attacks that change measurement values using False Data Injection (FDI) techniques, attacks on the communication network may disrupt the power system's real-time operation by intercepting messages, or by flooding the communication channels with unnecessary data. Addressing these attacks requires a cross-layer approach. In this paper a cross-layered strategy is presented, called Cross-Layer Ensemble CorrDet with Adaptive Statistics(CECD-AS), which integrates the detection of faulty SG measurement data as well as inconsistent network inter-arrival times and transmission delays for more reliable and accurate anomaly detection and attack interpretation. Numerical results show that CECD-AS can detect multiple False Data Injections, Denial of Service (DoS) and Man In The Middle (MITM) attacks with a high F1-score compared to current approaches that only use SG measurement data for detection such as the traditional physics-based State Estimation, Ensemble CorrDet with Adaptive Statistics strategy and other machine learning classification-based detection schemes.

This paper presents a hybrid data-driven physics model-based framework for real time monitoring in smart grids. As the power grid transitions to the use of smart grid technology, it's real time monitoring becomes more vulnerable to cyber attacks like false data injections (FDI). Although smart grids cyber-physical security has an extensive scope, this paper focuses on FDI attacks, which are modeled as bad data. State of the art strategies for FDI detection in real time monitoring rely on physics model-based weighted least squares state estimation solution and statistical tests. This strategy is inherently vulnerable by the linear approximation and the companion statistical modeling error, which means it can be exploited by a coordinated FDI attack. In order to enhance the robustness of FDI detection, this paper presents a framework which explores the use of data-driven anomaly detection methods in conjunction with physics model-based bad data detection via data fusion. Multiple anomaly detection methods working at both the system level and distributed local detection level are fused. The fusion takes into consideration the confidence of the various anomaly detection methods to provide the best overall detection results. Validation considers tests on the IEEE 118 bus system.

Uncertainty and variability of renewable energy sources present an imperative technical challenge for Electrical Distribution Utilities. Power Quality indices represent quality of energy delivered and reliability. In this work, a control strategy design for real-time PQ management in active distribution systems is presented. The present work addresses management of voltage fluctuations induced by the variability in renewable generation. A zero energy reserve approach to tackle fluctuations of renewable energy generators is developed. The power consumption of flexible loads is modulated to reduce the technical losses and peak load of the feeder in this reactive power control strategy. A Volt VAR control strategy formulation, using the capability of smart inverters to provide dynamic reactive power is presented. Unbalanced power flow, different load profiles and flexible loads as virtual energy storages are used to improve voltage profile and reduce technical losses while maintaining system reliability. IEEE 13 bus distribution system is used for control strategy design validation. Comparative results indicate reduction in the system technical losses and the stress on automatic voltage regulators. The ease of design of control strategy indicate potential real-life application., Comment: 7 pages, 11 figures