Search

Electron transfer and subsequent charge separation across donor-acceptor heterojunctions remain the most important areas of study in the field of third- generation photovoltaics. In this context, it is particularly important to unravel the dynamics of individual ultrafast processes (such as photoinduced electron transfer, carrier trapping and association, and energy transfer and relaxation), which prevail in materials and at their interfaces. In the frame of the National Center of Competence in Research “Molecular Ultrafast Science and Technology,” a research instrument of the Swiss National Science Foundation, several groups active in the field of ultrafast science in Switzerland have applied a number of complementary experimental techniques and computational simulation tools to scrutinize these critical photophysical phenomena. Structural, electronic, and transport properties of the materials and the detailed mechanisms of photoinduced charge separation in dye- sensitized solar cells, conjugated polymer- and small molecule-based organic photovoltaics, and high-efficiency lead halide perovskite solar energy converters have been scrutinized. Results yielded more than thirty research articles, an overview of which is provided here.

Methylammonium lead bromide perovskite (MAPbBr3) has been widely investigated for applications in visible perovskite light-emitting diodes (LEDs). Fine-tuning of the morphology and of the crystal size, from the microscale down to the quantum confinement regime, has been used to increase the photoluminescence quantum yield (PLQY). However, the physical processes underlying the PL emission of this perovskite remain unclear. Here, we elucidate the origin of the PL emission of polycrystalline MAPbBr3 thin films by different spectroscopic techniques. We estimate the exciton binding energy, the reduced exciton effective mass, and the trap density. Moreover, we confirm the coexistence of free carriers and excitons, quantifying their relative population and mutual interaction over a broad range of excitation densities. Finally, the enhanced PLQY upon crystal size reduction to the micro- and nanometer scale in the presence of additives is attributed to favored excitonic recombination together with reduced surface trapping thanks to efficient passivation by the additives.

Linking covalently both electron donor and acceptor components is an efficient way to gain thermodynamic control over the formation of well-ordered heterojunction materials suitable for organic photovoltaics. In this context, we attached flexible polymer segments to the termini of a (perylene bisimide)–quaterthiophene–(perylene bisimide) triad. The microphase segregation of the resulting coil-rod-coil architecture served to reliably promote the formation of lamellar phases. The lamellae were oriented vertically relative to the substrate, and they could be laterally aligned by mechanical rubbing, as determined by small and wide angle X-ray scattering, transmission electron microscopy, electron diffraction and AFM. Transient absorption spectroscopy revealed that light absorption was followed by charge separation and that charge recombination was slower in thin films than for solution-phase samples, especially when longer side chains were used. Thus, this study is a first step towards reliable lamellar phase segregation in donor–acceptor materials on the route towards improved materials for organic photovoltaics.

Organometal halide perovskites have emerged as promising next-generation solar cell technologies presenting outstanding efficiencies. However, many questions concerning their working principles remain to be answered. Here, we present a detailed study of hole transfer dynamics into polymeric hole transporting materials (HTMs), poly(triarylamine) (PTAA), poly(3-hexylthiophee-2,5-diyl (P3HT), and poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt-4,7-(2,1,3-benzothiadiazole) (PCPDTBT). The hole transfer dynamics are shown to occur on a time scale of thousands of picoseconds, being orders of magnitude slower compared to hole transfer involving commonly used Spiro-OMeTAD as HTM.

Methylammonium lead bromide perovskite (MAPbBr3) has been widely investigated for applications in visible perovskite light-emitting diodes (LEDs). Fine-tuning of the morphology and of the crystal size, from the microscale down to the quantum confinement regime, has been used to increase the photoluminescence quantum yield (PLQY). However, the physical processes underlying the PL emission of this perovskite remain unclear. Here, we elucidate the origin of the PL emission of polycrystalline MAPbBr3 thin films by different spectroscopic techniques. We estimate the exciton binding energy, the reduced exciton effective mass, and the trap density. Moreover, we confirm the coexistence of free carriers and excitons, quantifying their relative population and mutual interaction over a broad range of excitation densities. Finally, the enhanced PLQY upon crystal size reduction to the micro- and nanometer scale in the presence of additives is attributed to favored excitonic recombination together with reduced surface trapping thanks to efficient passivation by the additives.

Linking covalently both electron donor and acceptor components is an efficient way to gain thermodynamic control over the formation of well-ordered heterojunction materials suitable for organic photovoltaics. In this context, we attached flexible polymer segments to the termini of a (perylene bisimide)–quaterthiophene–(perylene bisimide) triad. The microphase segregation of the resulting coil-rod-coil architecture served to reliably promote the formation of lamellar phases. The lamellae were oriented vertically relative to the substrate, and they could be laterally aligned by mechanical rubbing, as determined by small and wide angle X-ray scattering, transmission electron microscopy, electron diffraction and AFM. Transient absorption spectroscopy revealed that light absorption was followed by charge separation and that charge recombination was slower in thin films than for solution-phase samples, especially when longer side chains were used. Thus, this study is a first step towards reliable lamellar phase segregation in donor–acceptor materials on the route towards improved materials for organic photovoltaics.

Electron transfer and subsequent charge separation across donor-acceptor heterojunctions remain the most important areas of study in the field of third- generation photovoltaics. In this context, it is particularly important to unravel the dynamics of individual ultrafast processes (such as photoinduced electron transfer, carrier trapping and association, and energy transfer and relaxation), which prevail in materials and at their interfaces. In the frame of the National Center of Competence in Research “Molecular Ultrafast Science and Technology,” a research instrument of the Swiss National Science Foundation, several groups active in the field of ultrafast science in Switzerland have applied a number of complementary experimental techniques and computational simulation tools to scrutinize these critical photophysical phenomena. Structural, electronic, and transport properties of the materials and the detailed mechanisms of photoinduced charge separation in dye- sensitized solar cells, conjugated polymer- and small molecule-based organic photovoltaics, and high-efficiency lead halide perovskite solar energy converters have been scrutinized. Results yielded more than thirty research articles, an overview of which is provided here.

Hybrid organic–inorganic metal perovskites have emerged as highly promising materials for solar energy conversion. However, key questions regarding the working principles of perovskite solar cells remain to be answered in order to improve the design of such devices. In the present study, we have investigated the influence of excess excitation energy on the initial photo-products generated from FTO/meso- TiO2/CH3NH3PbI3 samples. We find that upon resonant excitation at the band edge, part of the formation of free charges passes via an excitonic state that dissociates on the sub-picosecond time scale. An exciton binding energy of <10 meV is estimated from the lifetime of the exciton. On the other hand, if excess energy is available, free charges are directly generated. We have then investigated the hole injection into spiro- OMeTAD at the CH3NH3PbI3/spiro-OMeTAD interface. By following spectroscopically the generation of the oxidized form of the molecular hole conductor spiro-OMeTAD, we confirm that the hole injection is essentially ultrafast and occurs on the sub-80 femtosecond time scale. On this time scale, the hole injection competes with carrier cooling after photo-excitation and therefore the charge injection can occur from non- thermalised states.

Organometal halide perovskites have emerged as promising next-generation solar cell technologies presenting outstanding efficiencies. However, many questions concerning their working principles remain to be answered. Here, we present a detailed study of hole transfer dynamics into polymeric hole transporting materials (HTMs), poly(triarylamine) (PTAA), poly(3-hexylthiophee-2,5-diyl (P3HT), and poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt-4,7-(2,1,3-benzothiadiazole) (PCPDTBT). The hole transfer dynamics are shown to occur on a time scale of thousands of picoseconds, being orders of magnitude slower compared to hole transfer involving commonly used Spiro-OMeTAD as HTM.