Search

Although there is a range of approaches for classifying the wake structure behind an array of obstacles, these approaches provide inconsistent results across different array systems. This motivates the present study to integrate and reconcile these approaches into one that is consistent across different systems. This new, transferable classification approach is based on the dimensionless flow blockage of the array and the wake stability parameter. To demonstrate this approach, a series of laboratory experiments was conducted to characterise the wake structure behind an array of emergent cylinders across a practically relevant parameter space that has not previously been explored. Two arrays with the same values of flow blockage and wake stability parameters but different sizes display the same wake structure, demonstrating the controlling influence of these two parameters on the wake structure. This approach classifies four different wake structures, which are distinct in that they display differences in instantaneous and time-averaged flow fields, temporal velocity oscillations, shear layer growth and the length of the steady wake region. The dependence of the wake structure on the two parameters is a consequence of (i) the controlling influence of blockage on the fraction of incident flow passing through the array and (ii) the ability of shallowness to suppress wake instabilities and, to a lesser extent, also influence the velocity through the array. This paper provides a predictive framework for the wake structure based on knowledge of the array geometry, and the depth and velocity of incident flow across the entire relevant practical parameter space. [ABSTRACT FROM AUTHOR]

Previous work suggests that the arrangement of elements in an obstruction may influence the bulk flow velocity through the obstruction, but the physical mechanisms for this influence are not yet clear. This is the motivation for this study, where direct numerical simulation is used to investigate flow through an array of cylinders at a resolution sufficient to observe interactions between wakes of individual elements. The arrangement is altered by varying the gap ratio $G/d$ (1.2 – 18, G is the distance between two adjacent cylinders, d is the cylinder diameter), array-to-element diameter ratio $D/d$ (3.6 – 200, D is the array diameter), and incident flow angle ($0^{\circ} - 30^{\circ}$). Depending on the element arrangement, it is found that the average root-mean-square lift and drag coefficients can vary by an order of magnitude, whilst the average time-mean drag coefficient of individual cylinders ($\overline{C_{d}}$), and the bulk velocity are found to vary by up to $50\,\%$ and a factor of 2, respectively. These arrangement effects are a consequence of the variation in flow and drag characteristics of individual cylinders within the array. The arrangement effects become most critical in the intermediate range of flow blockage parameter $\mathit{\Gamma_{D}^{\prime}} = 0.5-1.5$ ($\mathit{\Gamma_{D}^{\prime}}=\overline{C_{d}}aD/(1-\phi)$ , where a is frontal element area per unit volume, and $\phi$ is solid volume fraction), due to the high variability in element-scale flow characteristics. Across the full range of arrangements modelled, it is confirmed that the bulk velocity is governed by flow blockage parameter but only if the drag coefficient incorporates arrangement effects. Using these results, this paper proposes a framework for describing and predicting flow through an array across a variety of arrangements. [ABSTRACT FROM AUTHOR]

Although there is a range of approaches for classifying the wake structure behind an array of obstacles, these approaches provide inconsistent results across different array systems. This motivates the present study to integrate and reconcile these approaches into one that is consistent across different systems. This new, transferable classification approach is based on the dimensionless flow blockage of the array and the wake stability parameter. To demonstrate this approach, a series of laboratory experiments was conducted to characterise the wake structure behind an array of emergent cylinders across a practically relevant parameter space that has not previously been explored. Two arrays with the same values of flow blockage and wake stability parameters but different sizes display the same wake structure, demonstrating the controlling influence of these two parameters on the wake structure. This approach classifies four different wake structures, which are distinct in that they display differences in instantaneous and time-averaged flow fields, temporal velocity oscillations, shear layer growth and the length of the steady wake region. The dependence of the wake structure on the two parameters is a consequence of (i) the controlling influence of blockage on the fraction of incident flow passing through the array and (ii) the ability of shallowness to suppress wake instabilities and, to a lesser extent, also influence the velocity through the array. This paper provides a predictive framework for the wake structure based on knowledge of the array geometry, and the depth and velocity of incident flow across the entire relevant practical parameter space. [ABSTRACT FROM AUTHOR]