Search

Layered stacks of the structure Si(100)/Ni/BCxNy were produced by physical (Ni) and chemical (BCN) vapor deposition. The BCN layers were deposited at temperatures of 200, 300, 400, and 500 °C. The resulting samples were characterized by ellipsometry, X-ray photoelectron spectrometry, secondary ion mass spectrometry, atomic force microscopy, and X-ray reflectometry. The formed structures of the samples synthesized at 200 and 500 °C, respectively, were determined. For the synthesis temperature of 200 °C, compounds with Ni-C bonds were found at the interface Ni/BCxNy. For the sample produced at 500 °C, compounds with Ni-Si bonds were identified, dispersed as particles or droplets in the corresponding interface. [ABSTRACT FROM AUTHOR]

Series of Fe3O4/MgO(001) and Fe3O4/Fe/MgO(001) films (single- and bi-layer films, respectively) with a total layer thickness in the range of 20÷150 nm were investigated by the Rutherford backscattering spectrometry (2 MeV He+ ion beam), by the Rutherford backscattering spectrometry channeling experiments (1.5 MeV He+ ion beam). Depending on the layer thickness of each layer and the film geometry, a single Fe peak and/or a double-anomaly feature was revealed in the Rutherford backscattering spectra. For all films no magnesium presence in the surface layer was observed. For both single- and bi-layer films with a total layer thickness less than 60 nm only one minimum was observed in the channeling curves, while a double minimum was revealed for the bi-layer films with a larger thickness. X-ray reflectometry measurements have revealed that the film density is the same as that of the bulk one. [ABSTRACT FROM AUTHOR]

The stoichiometry and electronic properties of bulk Cu2S thin films obtained by vacuum evaporation were investigated by optical spectroscopy, X-ray diffraction and photoemission spectroscopy. The Cu2S/CdS heterojunction interface has been prepared in situ and characterized by photoelectron spectroscopy (X-ray photoemission spectroscopy and ultraviolet photoelectron spectroscopy) after each growth step under ultra high vacuum conditions. The XPS core level spectra as well as valence band spectra of the substrate Cu2S and overlayer CdS were acquired after each step. From these measurements, a large overall band bending of 0.9 eV is observed. The valence band offset is determined to be ΔEVB=1.2 eV and the conduction band offset is ΔECB=0±0.1 eV. [Copyright &y& Elsevier]

Abstract: Iron disilicide synthesis by mechanical alloying was performed. ɛ-FeSi, α-Fe1−x Si2, amorphous FeSi2 were formed with relative intensities depending on the milling period. β-FeSi2 phase was formed after annealing the gridded powder at the temperature where this phase is stable. Mössbauer spectroscopy and X-ray diffraction methods were applied to determine the different phases formed. The morphology of the resulting particles was observed by high resolution scanning electron microscopy. The effect of the milling on bulk iron–silicide samples was and studied chemical effects of the ball milling on Fe–Si2 systems have been studied. [ABSTRACT FROM AUTHOR]

Abstract: We recently found that stabilizing agents have a strong effect on the interface structure of sol–gel deposited coatings. In this work we investigated the influence of the stabilizing agents hydroxypropyl cellulose (HPC) and acetylacetone (acac) on the protection performance and structure of protective zirconium oxide coatings which were deposited from zirconium–tetrapropoxide onto iron samples and heated at 675K. The crystalline structure of the films was characterized with X-ray diffraction (XRD) and transmission electron microscopy (TEM). The element distribution and chemical composition was studied with energy dispersive X-ray spectroscopy (EDX) and secondary ion mass spectrometry (SIMS). Film porosity and protection performance were measured electrochemically with potentiodynamic scans. XRD measurements revealed a higher amount of crystalline zirconium oxide on the surface for acetylacetone coatings than for HPC. However, the SIMS depth profiles showed a thicker mixed iron–zirconium oxide layer in the case of HPC samples. Although the electrochemical results of acetylacetone films indicated a good protection with low film porosity, the dissolution currents of the HPC coatings were still two orders of magnitude lower than for acac. This means, with the use of HPC the protection ability of zirconium coatings on iron can be improved significantly. [Copyright &y& Elsevier]

Abstract: The interface reactions in an epitaxial 10nm-thick Fe3O4/MgO(001) film were investigated by using Rutherford Backscattering spectrometry (RBS), channeling (RBS-C) and X-ray reflectometry (XRR). The as-grown film had a good crystallinity indicated by the minimum yield and the half-angle value for Fe, respectively, χ min(Fe)=22% and ψ 1/2(Fe)=0.62°. Annealing the films under partial argon pressure up to 600°C led to a large enhancement of Mg out-diffusion into the film forming a wustite-type phase, but the total layer thickness did not change much. Ion irradiation of the film by 1MeV Ar ion beam caused a strong Fe ion mixing resulting in a large interfacial zone with a thickness of 23nm. [Copyright &y& Elsevier]

The electrical transport in bismuth nanowires is strongly influenced by both sample geometry and crystallinity. Compared to bulk bismuth, the electrical transport in nanowires is dominated by size effects and influenced by surface states, which gain increasing relevance with increasing surface-to-volume ratios, i.e. with decreasing wire diameter. Bismuth nanowires with tailored diameter and crystallinity constitute, therefore, excellent model systems, allowing to study the interplay of the different transport phenomena. Here, we present temperature-dependent Seebeck coefficient and relative electrical resistance measurements of parallel bismuth nanowire arrays with diameters between 40 and 400 nm synthesized by pulsed electroplating in polymer templates. Both electrical resistance and Seebeck coefficient exhibit a non-monotonic temperature dependence, with the sign of the Seebeck coefficient changing from negative to positive with decreasing temperature. The observed behavior is size-dependent and is attributed to limitations of the mean free path of the charge carriers within the nanowires. The observed size-dependent Seebeck coefficient and in particular the size-dependent sign change opens a promising avenue for single-material thermocouples with p- and n-legs made from nanowires with different diameters., (© 2023. The Author(s).)

Autocatalytic deposition represents a facile, versatile, and scalable wet-chemical tool for nanofabrication. However, the intricate component interplay in plating baths containing multiple metal species impedes alloy deposition. We resolved this challenge in the bimetallic copper-platinum system by exploiting the kinetic stability of platinum complexes, which allows adjusting their ligand sphere and thus reactivity independently from the present copper ions in a preceding, thermally activated ligand exchange step. By using metastable Pt IV precursors of varying degrees of complexation, copper-platinum alloys of adjustable atomic ratio were plated from solutions of identical composition and concentration, but differing local coordination environment. Due to its excellent conformity and nanoscale homogeneity, the reaction is compatible with ambitious 3D substrate morphologies, as demonstrated in the template-assisted fabrication of nanotubes with high aspect ratio. The ability to generate additional synthetic degrees of freedom by decoupling the metal complex speciation from the solution composition is of large interest for redox-chemical synthesis techniques, such as electrodeposition or nanoparticle colloid production., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Low-temperature-processed ITO thin films offer the potential of overcoming the doping limit by suppressing the equilibrium of compensating oxygen interstitial defects. To elucidate this potential, electrical properties of Sn-doped In 2 O 3 (ITO) thin films are studied in dependence on film thickness. In-operando conductivity and Hall effect measurements during annealing of room-temperature-deposited films, together with different film thickness in different environments, allow to discriminate between the effects of crystallization, grain growth, donor activation and oxygen diffusion on carrier concentrations and mobilities. At 200 ∘ C , a control of carrier concentration by oxygen incorporation or extraction is only dominant for very thin films. The electrical properties of thicker films deposited at room temperature are mostly affected by the grain size. The remaining diffusivity of compensating oxygen defects at 200 ∘ C is sufficient to screen the high Fermi level induced by deposition of Al 2 O 3 using atomic layer deposition (ALD), which disables the use of defect modulation doping at this temperature. The results indicate that achieving higher carrier concentrations in ITO thin films requires a control of the oxygen pressure during deposition in combination with seed layers to enhance crystallinity or the use of near room temperature ALD.

Reduction of the operating temperature to an intermediate temperature range between 350 °C and 600 °C is a necessity for Solid Oxide Fuel/Electrolysis Cells (SOFC/SOECs). In this respect the application of proton-conducting oxides has become a broad area of research. Materials that can conduct protons and electrons at the same time, to be used as electrode catalysts on the air electrode, are especially rare. In this article we report on the proton conduction in expitaxially grown BaFeO 2.5+δ (BFO) thin films deposited by pulsed laser deposition on Nb:SrTiO₃ substrates. By using Electrochemical Impedance Spectroscopy (EIS) measurements under different wet and dry atmospheres, the bulk proton conductivity of BFO (between 200 °C and 300 °C) could be estimated for the first time (3.6 × 10 -6 S cm -1 at 300 °C). The influence of oxidizing measurement atmosphere and hydration revealed a strong dependence of the conductivity, most notably at temperatures above 300 °C, which is in good agreement with the hydration behavior of BaFeO 2.5 reported previously., Competing Interests: The authors declare no conflict of interest.

Metal nanowires (NWs) represent a prominent nanomaterial class, the interest in which is fueled by their tunable properties as well as their excellent performance in, for example, sensing, catalysis, and plasmonics. Synthetic approaches to obtain metal NWs mostly produce colloids or rely on templates. Integrating such nanowires into devices necessitates additional fabrication steps, such as template removal, nanostructure purification, or attachment. Here, we describe the development of a facile electroless plating protocol for the direct deposition of gold nanowire films, requiring neither templates nor complex instrumentation. The method is general, producing three-dimensional nanowire structures on substrates of varying shape and composition, with different seed types. The aqueous plating bath is prepared by ligand exchange and partial reduction of tetrachloroauric acid in the presence of 4-dimethylaminopyridine and formaldehyde. Gold deposition proceeds by nucleation of new grains on existing nanostructure tips and thus selectively produces curvy, polycrystalline nanowires of high aspect ratio. The nanofabrication potential of this method is demonstrated by producing a sensor electrode, whose performance is comparable to that of known nanostructures and discussed in terms of the catalyst architecture. Due to its flexibility and simplicity, shape-selective electroless plating is a promising new tool for functionalizing surfaces with anisotropic metal nanostructures.

Background: The German greenhouse gas inventory in the land use change sector strongly depends on national forest inventory data. As these data were collected periodically 1987, 2002, 2008 and 2012, the time series on emissions show several "jumps" due to biomass stock change, especially between 2001 and 2002 and between 2007 and 2008 while within the periods the emissions seem to be constant due to the application of periodical average emission factors. This does not reflect inter-annual variability in the time series, which would be assumed as the drivers for the carbon stock changes fluctuate between the years. Therefore additional data, which is available on annual basis, should be introduced into the calculations of the emissions inventories in order to get more plausible time series., Results: This article explores the possibility of introducing an annual rather than periodical approach to calculating emission factors with the given data and thus smoothing the trajectory of time series for emissions from forest biomass. Two approaches are introduced to estimate annual changes derived from periodic data: the so-called logging factor method and the growth factor method. The logging factor method incorporates annual logging data to project annual values from periodic values. This is less complex to implement than the growth factor method, which additionally adds growth data into the calculations., Conclusion: Calculation of the input variables is based on sound statistical methodologies and periodically collected data that cannot be altered. Thus a discontinuous trajectory of the emissions over time remains, even after the adjustments. It is intended to adopt this approach in the German greenhouse gas reporting in order to meet the request for annually adjusted values.

To reduce energy losses in water electrolysers a fundamental understanding of the water oxidation reaction steps is necessary to design efficient oxygen evolution catalysts. Here we present CoOx/Ti electrocatalytic films deposited by thermal and plasma enhanced chemical vapor deposition (CVD) onto titanium substrates. We report electrochemical (EC), photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) measurements. The electrochemical behavior of the samples was correlated with the chemical and electronic structure by recording XPS spectra before and after each electrochemical treatment (conditioning and cyclovoltammetry). The results show that the electrochemical behavior of CoOx/Ti strongly depends on the resulting electronic structure and composition. The thermal deposition leads to the formation of a pure Co(II)Ox which transforms to a mixed Co(II)Co(III)Ox during the OER. This change in oxidation state is coupled with a decrease in overpotential from η = 0.57 V to η = 0.43 V at 5 mA cm(-2). Plasma deposition in oxygen leads to a Co(III)-dominated mixed CoOx, that has a lower onset potential as deposited due to a higher Co(III) content in the initial deposited material. After the OER XPS results of the CoOx/Ti indicate a partial formation of hydroxides and oxyhydroxides on the oxide surface. Finally the plasma deposition in air, results in a CoOxOH2 surface, that is able to completely oxidizes during OER to an oxyhydroxide Co(III)OOH. With the in situ formed CoOOH we present a highly active catalyst for the OER (η = 0.34 at 5 mA cm(-2); η = 0.37 V at 10 mA cm(-2)).

We present a versatile approach for the fabrication of well-defined networks of interconnected metal nanotubes, which applies electroless plating to ion-track-etched polymer templates that enclose designed pore networks. In order to obtain self-supporting structures, the deposition reactions must be optimized to yield conformal nanoscale metal films on microstructured substrates possessing extensive inner surfaces. Using this route, gold, copper, silver, nickel, and platinum nanotube networks are synthesized. The resulting structures can be handled macroscopically and combine a large surface area with continuous mass transport and conduction pathways, rendering them promising for application in, for example, electrocatalysis and sensing. This potential is demonstrated by employing a gold nanotube network for the amperometric detection of hydrogen peroxide, in which excellent sensitivity, catalyst utilization, and stability is achieved., (Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hydrolysis-condensation of bis(triprop-1-ynylstannyl)butylene led to nanostructured bridged polystannoxane films yielding tin dioxide thin layers upon UV-treatment or annealing in air. According to Fourier transform infrared (FTIR) spectroscopy, contact angle measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and scanning electron microscopy (SEM) data, the films were composed of a network of aggregated "pseudo-particles", as calcination at 600 °C is required to form cassiterite nanocrystalline SnO2 particles. In the presence of reductive gases such as H2 and CO, these films gave rise to highly sensitive, reversible, and reproducible responses. The best selectivity toward H2 was reached at 150 °C with the hybrid thin films that do not show any response to CO at 20-200 °C. On the other hand, the SnO2 films prepared at 600 °C are more sensitive to H2 than to CO with best operating temperature in the 300-350 °C range. This organometallic approach provides an entirely new class of gas-sensing materials based on a class II organic-inorganic hybrid layer, along with a new way to include organic functionality in gas sensing metal oxides.

Nanocrystalline tin dioxide (SnO(2)) ultra-thin films were obtained employing a straightforward solution-based route that involves the calcination of bridged polystannoxane films processed by the sol-gel process from bis(triprop-1-ynylstannyl)alkylene and -arylene precursors. These films have been thoroughly characterized by FTIR, contact angle measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force (AFM) and scanning electron (SEM) microscopies. Annealing at a high temperature gave 30-35 nm thick cassiterite SnO(2) films with a mean crystallite size ranging from 4 to 7 nm depending on the nature of the organic linker in the distannylated compound used as a precursor. In the presence of H(2) and CO gases, these layers led to highly sensitive, reversible and reproducible responses. The sensing properties were discussed in regard to the crystallinity and porosity of the sensing body that can be tuned by the nature of the precursor employed. Organometallic chemistry combined with the sol-gel process therefore offers new possibilities toward metal oxide nanostructures for the reproducible and sensitive detection of combustible and toxic gases.

Calcination of cyclopentadienyltitanium-based organic-inorganic hybrid materials at 450-500 °C led to the formation of anatase titanium dioxide as white powders consisting of a porous network of aggregated nanoparticles, the nanoporosity detected being related to the inter-particle space. Depending on the calcination temperatures, the surface area of the titanium dioxide particles varied from 65 to 158 m(2) g(-1).

The ionization potentials of In(2)O(3) films grown epitaxially by magnetron sputtering on Y-stabilized ZrO(2) substrates with (100) and (111) surface orientation are determined using photoelectron spectroscopy. Epitaxial growth is verified using x-ray diffraction. The observed ionization potentials, which directly affect the work functions, are in good agreement with ab initio calculations using density functional theory. While the (111) surface exhibits a stable surface termination with an ionization potential of ∼ 7.0 eV, the surface termination and the ionization potential of the (100) surface depend strongly on the oxygen chemical potential. With the given deposition conditions an ionization potential of ∼ 7.7 eV is obtained, which is attributed to a surface termination stabilized by oxygen dimers. This orientation dependence also explains the lower ionization potentials observed for In(2)O(3) compared to Sn-doped In(2)O(3) (ITO) (Klein et al 2009 Thin Solid Films 518 1197-203). Due to the orientation dependent ionization potential, a polycrystalline ITO film will exhibit a laterally varying work function, which results in an inhomogeneous charge injection into organic semiconductors when used as electrode material. The variation of work function will become even more pronounced when oxygen plasma or UV-ozone treatments are performed, as an oxidation of the surface is only possible for the (100) surface. The influence of the deposition technique on the formation of stable surface terminations is also discussed., (© 2011 IOP Publishing Ltd)

Self-assembled nanoporous tin-based hybrid thin films prepared by the sol-gel method from organically-bridged ditin hexaalkynides detect hydrogen gas from 50 to 200 °C at the 200-10,000 ppm level. This finding opens a fully new class of gas-sensing materials as well as a new opportunity to integrate organic functionality in gas sensing metal oxides.