431 results on '"Bouzakis, K"'
Search Results
2. Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
3. Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts
4. Bias voltage optimum adjustment considering coatings’ strength and adhesion requirements when cutting various steels
5. Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performance
6. Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools
7. 3D-laser scanning of the Parthenon west frieze blocks and their digital assembly based on extracted characteristic geometrical details
8. Effect of the interface fatigue strength of NCD coated hardmetal inserts on their cutting performance in milling
9. Repetitive impact test near uncoated and coated cutting edges for assessing their fatigue behavior
10. Fatigue strength of diamond coating-substrate interface assessed by inclined impact tests at ambient and elevated temperatures
11. Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts
12. Fast determination of parameters describing manufacturing imperfections and operation wear of nanoindenter tips
13. An Intelligent System for the Determination of the Required Setups and the Associated Clamping Points and Clamping Devices in Milling
14. Automatic Part Geometry and Material Removal Recognition to Optimize the Cutting Conditions along Tool Paths in NC-Milling
15. Classification of Features Considering Their Machinability and Factory Facilities for Computer Aided Process Planning
16. Strain rate effect on the fatigue failure of thin PVD coatings: An investigation by a novel impact tester with adjustable repetitive force
17. FEM supported semi-solid high pressure die casting process optimization based on rheological properties by isothermal compression tests at thixo temperatures extracted
18. Coated tools’ wear description in down and up milling based on the cutting edge entry impact duration
19. Nano-impact test on a TiAlN PVD coating and correlation between experimental and FEM results
20. Adhesive interlayers' effect on the entire structure strength of glass molding tools' Pt–Ir coatings by nano-tests determined
21. Effect of PVD films wet micro-blasting by various Al2O3 grain sizes on the wear behaviour of coated tools
22. Diffusion and oxidation phenomena at elevated temperatures in the contact area between hardened steel and various PVD coatings
23. Methods for Determining Coating's Strength Properties Changes After Inducing Plastic or Elastic Residual Stresses
24. Fatigue Induced Alteration of the Superficial Strength Properties of 2024 Aluminum Alloy
25. Influence of dry micro-blasting grain quality on wear behaviour of TiAlN coated tools
26. Velocity effects in metal forming and machining processes
27. Cutting performance of coated tools with various adhesion strength quantified by inclined impact tests
28. Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools’ cutting performance
29. Adaption of graded Cr/CrN-interlayer thickness to cemented carbide substrates' roughness for improving the adhesion of HPPMS PVD films and the cutting performance
30. The effect of substrate pretreatments and HPPMS-deposited adhesive interlayers’ materials on the cutting performance of coated cemented carbide inserts
31. Automating the manufacturing process under a web based framework
32. A methodological framework for end-of-life management of electronic products
33. Application in milling of coated tools with rounded cutting edges after the film deposition
34. Design and manufacturing aspects of a vaginal speculum of antiquity, as investigated by computer tomographies
35. Correlation of the impact resistance of variously doped CrAlN PVD coatings with their cutting performance in milling aerospace alloys
36. Characterization of fatigue and adhesion properties of a-C:H/CrN coatings on bearing rings by impact tests
37. Position analysis in polynomial form of class-three Assur groups with two or three prismatic joints
38. Manufacturing of cylindrical gears by generating cutting processes: A critical synthesis of analysis methods
39. Increasing tool life by adjusting the milling cutting conditions according to PVD films’ properties
40. Investigation of coated tools’ cutting performance in milling Ti6Al4V and its correlation to the temperature dependent impact resistance of the film
41. Deviations in determining coatings' and other materials' mechanical properties, when considering different indenter tip geometries and calibration procedures
42. Effect of film ion bombardment during the pvd process on the mechanical properties and cutting performance of TiAlN coated tools
43. The construction and the quality assurance–quality control of the 112 MDT-Barrel Inner Small precision chambers of the ATLAS Muon Spectrometer
44. The inclined impact test: A novel method for the quantification of the adhesion properties of PVD films
45. An Innovative Methodology for the Performance Evaluation of Coated Cemented Carbide Inserts in Milling of Inconel 718
46. Off-line programming of an industrial robot for manufacturing
47. Bending and indentation tests to determine chipboards' mechanical strength critical stresses and their correlation to the specific cutting force in milling
48. The effect of annealing duration at deposition temperature on the strength properties gradation of PVD films and on the wear behaviour of coated cemented carbide inserts
49. An accurate and fast approach for determining materials stress–strain curves by nanoindentation and its FEM-based simulation
50. Wear development of cemented carbide inserts coated with mono and multilayer PVD films, considering their strength properties, adhesion and the cutting loads
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.