Search

To compare the intrusive forces and labio-palatal moments generated at the maxillary incisors by a 0.017 x 0.025 inch reverse curve NiTi wire using self-ligating and conventional brackets.

Based on previous in vitro experiments with specimens of porcine mandibular premolars, the simulation of the periodontal ligament response to force in the initial phase of orthodontic tooth movement is described. The initial response of the periodontal ligament can be simulated with a poro-visco-hyperelastic model. For the ground substance a hyperelastic constitutive model for compressible material was used. To facilitate parameter identification a reduced order model and an optimal interpolation metamodel were used. Parameters for the constitutive model identified herein are in good agreement with published values. They indicate a high initial compressibility of the periodontal ligament, which may be attributed to the compressibility of the vascular system within the periodontal ligament. Dimensionless analysis suggests that poroelastic behaviour will gradually cease when viscoelastic relaxation progresses. This was observed as well in the simulation and confirmed by varying the poroelastic model parameters within physically justified limits. Alveolar bone permeability has a significant influence on the flow of pore fluid in the periodontium due to poroelasticity. It is argued that in vivo alveolar bone perforation may adapt locally to optimise for the predominant load situation. A strain rate hardening effect was observed, which is not covered by the simulation, and may be the subject of further investigations. [ABSTRACT FROM AUTHOR]

Background: This study aimed to evaluate the efficacy of polydopamine (PDA) functionalization on orthodontic brackets in inhibiting biofilm formation and promoting surface bioactivity to buffer the acidity of caries-causing bacteria around orthodontic brackets and prevent demineralization. The stability of the coating in artificial saliva (AS) and distilled water was evaluated, along with its effect on pH changes in simulated body fluid (SBF) and distilled water. Methods: Maxillary incisor orthodontic brackets underwent PDA functionalization using a dopamine hydrochloride solution following a specific protocol. Biofilm formation on both control (Br-0) and coated (Br-PDA) brackets was assessed immediately after coating and after two months of aging (Aged Br-PDA) in artificial saliva. The adherent biofilm bacteria on brackets were quantified with colony count assessment and optical density. Surface morphology, Bioactivity, and coating stability were analyzed using Scanning Electron Microscopy (SEM). Coated and uncoated samples were immersed in SBF and deionized water, and pH changes were monitored over 7 days using a pH meter. Results: PDA-functionalized brackets, both freshly coated (1.08 OD) and aged for two months (1.6 OD), showed significantly reduced biofilm formation compared to non-functionalized control brackets (2.07 OD), with p-value < 0.05. This reduction was confirmed through optical density measurements and colony-forming unit (CFU) counts (1.63E + 06, 4.53E + 07, and 7.56E + 07 respectively, p-value < 0.05). SEM analysis revealed alterations in surface morphology and composition, suggesting enhanced biointeraction in the coated brackets. Stability assessments in artificial saliva and deionized water demonstrated the durability of the coating. pH measurements indicated minimal changes in SBF and water, with PDA-functionalized brackets showing slight alterations. Conclusions: Our research findings suggest that PDA-functionalized brackets possess promising antimicrobial properties and stability, offering potential applications in orthodontic treatment to mitigate biofilm formation and prevent white spot lesions around orthodontic brackets. Further investigation is required to optimize the coating formulation and explore its long-term efficacy in clinical settings. [ABSTRACT FROM AUTHOR]

Background. The impact of tongue protrusion forces on the formation of malocclusions is well documented in academic literature. In the case of bone dehiscence of the buccal wall in front of the lower frontal teeth, this process may be even more pronounced. Augmentation with 3D customized allogenic bone blocks (CABB) has been proposed as a potential solution for treating such defects. The objective was to assess the impact of bone block adjustment accuracy on the resistance of teeth to protrusion forces at various stages of alveolar bone loss. Methods: A finite element analysis (FEM) was conducted to ascertain whether augmentation with a CABB will result in increased resilience to tongue protrusion forces. Three-dimensional models of the mandible with dehiscenses were created, based on the dehiscences classification and modification proposed in the journal by the authors of regenerative method. The models feature a CABB positioned at three different distances: 0.1 mm, 0.4 mm, and 1.0 mm. The material parameters were as follows: bone (homogenous, isotropic, E = 2 GPa), teeth (E = 20 GPa), periodontal ligament (E = 0.44 MPa), and membrane between bones (E = 3.4 MPa). A tongue protrusion force within the range of 0–5 N was applied to each individual frontal tooth. Results: The use of an CABB has been shown to positively impact the stability of the teeth. The closer the bone block was placed to the alveolar bone, the more stable was the result. The best results were obtained with a ¼ dehiscence and 0.1 mm distance. Conclusions: The protrusive forces produced by the tongue might not be the biggest one, but in a presence of the bone loss they might have serious results. Even shortly after the surgery, CABB has a positive impact on the incisor resilience. [ABSTRACT FROM AUTHOR]