Search

Objective: This in vivo study compared two bleaching techniques with regard to the degree of tooth sensitivity (TS), color change, and treatment stability for a 6-month follow-up period. Materials and methods: Sixty volunteers were selected according to inclusion and exclusion criteria and submitted to in-office bleaching. For group 1, we performed one bleaching session with a 35% hydrogen peroxide gel and a second bleaching session after 7 days; for group 2, we performed two bleaching sessions with two applications per session, each session with a 7-day interval, using a light-emitting diodes (LEDs) device emitting violet light (405-410 nm) without employing peroxide-containing bleaching gel. TS was recorded immediately before and immediately after each bleaching session using the Variance Analogic Scale. The color of upper central incisors and upper canines at baseline was recorded immediately after each bleaching session, after 15, 30, and 180 days, with a value-oriented shade guide used by two well-trained observers. Results: The two whitening protocols results were similar regarding the immediate effectiveness and 6-month stability of tooth whitening. Dental bleaching with violet LED did not promote postoperative pain sensitivity at any of the evaluated times. However, dental bleaching performed with 35% hydrogen peroxide promoted higher postoperative pain sensitivity. Conclusions: The violet light alone provided dental bleaching and had the clinical advantage of promoting less immediate postoperative sensitivity; however, an unwanted repigmentation occurred after dental bleaching with light alone.

Objective: The aim of this in vitro study was to evaluate the degradation of type I collagen fibers after treatment with a papain-based gel associated with a blue dye (PapaMBlue™) for use in antimicrobial photodynamic therapy., Materials and Methods: For such, 60 bioabsorbable membrane sponge discs were used. Group 1 was the negative control group. In groups 2, 3, and 4, the papain-based gel PapaMBlue gel was applied all over the samples for 4 min and irradiated using red laser (660 ± 10 nm) with 15, 30, and 40 J/cm 2 , respectively. In group 5, the papain-based gel was applied all over the samples for 4 min. In group 6, the photosensitizing dye was applied all over the samples for 4 min. The compositional analysis of the samples was performed using ATR-FTIR (attenuated total reflectance-Fourier transformed infrared spectroscopy). The data were statistically analyzed using ANOVA and Tukey's test (p < 0.05)., Results: Neither classic Papacarie™ nor the modified product with a photosensitizing agent (PapaMBlue) promoted collagen degradation., Conclusions: The irradiation of methylene blue added to papain gel with red light did not alter the chemical structure of type I collagen.

This study intended to evaluate the effects of a papain-gel with a red-light absorbing pigment (methylene blue - MB) to mediate photodynamic therapy (PDT) against Streptococcus mutans biofilms. The PapaMBlue was compared with free MB to generate reactive oxygen species using fluorescence probes (SOSG and HPF). PDT (660-nm light) was carried out against S. mutans biofilms grown on either plastic dishes or on collagen membrane and assayed by CFU, live-dead staining using confocal microscopy, transmission electron microscopy and H&E staining for collagen films. Cytotoxicity and subcellular localization was studied in human fibroblasts. Sponges of bioabsorbable type I collagen membrane were exposed to papain based gel, irradiated with laser and analyzed about their integrity by ATR-FTIR. The PapaMBlue produced higher amounts of singlet oxygen and hydroxyl radicals than free MB, possibly due to better disaggregation of the dye in solution. The PapaMBlue antimicrobial effects on biofilms proved to be capable of reducing the S. mutans. Both MTT and PrestoBlue assays showed higher cell viability and metabolism scores in fibroblasts treated with PapaMBlue and MB, possibly due to stimulation of mitochondrial activity and that collagen triple helix is unaffected. The PapaMBlue is equally effective as MB in destroying S. mutans biofilms growing on plastic or collagen without affecting fibroblasts.

Considering the improvement of biomaterials that facilitate atraumatic restorative techniques in dentistry, a papain-based gel can be used in the chemomechanical removal of decayed dental tissue. However, there is no information regarding the influence of this gel on the structure of sound collagen. The aim of the present study was to investigate the adsorption of a papain-based gel (Papacarie(TM)) to collagen and determine collagen integrity after treatment. A pilot study was first performed with 10 samples of type I collagen membrane obtained from bovine Achilles deep tendon to compare the influence of hydration (Milli-Q water) on infrared bands of collagen. In a further experiment, 10 samples of type I collagen membrane were used to evaluate the effects of Papacarie(TM) on the collagen microstructure. All analyses were performed using the attenuated total reflectance technique of Fourier transform infrared (ATR-FTIR). The results demonstrated that the application of Papacarie(TM) does not lead to the degradation of collagen and this product can be safely used in minimally invasive dentistry. As the integrity of sound collagen is preserved after the application of the papain-based gel, this product is indicated for the selective removal of infected dentin, leaving the affected dentin intact and capable of re-mineralization.

One possible undesirable consequence of orthodontic therapy is the development of incipient caries lesions of enamel around brackets. The aim of this study was to compare the effects of CO2 (λ = 10.6 μm) and Nd:YAG (λ = 1,064 nm) lasers associated or not with topical fluoride application on the prevention of caries lesions around brackets. Brackets were bonded to the enamel of 65 premolars. The experimental groups (n = 13) were: G1--application of 1.23% acidulated fluoride phosphate gel (AFP, control); G2--Nd:YAG laser irradiation (0.6 W, 84.9 J/cm(2), 10 Hz, 110 μs, contact mode); G3--Nd:YAG laser irradiation associated with AFP; G4--CO2 laser irradiation (0.5 W, 28.6 J/cm(2), 50 Hz, 5 μs, and 10 mm focal distance); and G5--CO2 laser irradiation associated with AFP. Quantitative light-induced fluorescence was used to assess enamel demineralization. The data were statistically compared (α = 5%). The highest demineralization occurred in the Nd:YAG laser group (G2, 26.15% ± 1.94). The demineralization of all other groups was similar to that of the control group. In conclusion, CO2 laser alone was able to control enamel demineralization around brackets at the same level as that obtained with topical fluoride application.

Objectives: This study investigated the radio-opacity of commercially available glass ionomer cements (GICs), flowable resin composites (FRCs) and calcium hydroxide cements (CHCs) and compared this with the radio-opacity of enamel, dentine and aluminium stepwedge. 16 GICs, 8 FRCs and 4 CHCs were analysed., Methods: Three sets of three samples were prepared: 1 mm, 2 mm and 3 mm thickness for GIC and FRC and 1 mm thickness for CHC. Specimens of enamel and dentine with the same thicknesses were obtained. As a control, an aluminium stepwedge was used. Radiographs were taken with a digital Kodak RVG 5000 (0.32 s, 30 cm). The images were analysed using the Image Tool(®) program (v. 2.00; The University of Texas Health Science Center, San Antonio, TV) to obtain the mean grey values., Results: Analysis of variance was used to investigate the significance of differences among the groups. For pairwise comparisons, the Tukey test was applied (p < 0.05). The GICs Ionomaster (Wilcos, Petrópolis, Brazil), Maxxion (FGM, Joinville, Brazil), Bioglass R (Biodinâmica, Ibiporã, Brazil), Bioglass F (Biodinâmica), Vidrion R (SS White, Rio de Janerio, Brazil) and Vidrion F (SS White), presented radio-opacity lower than that of dentine. All FRCs and CHCs studied showed radio-opacity higher than that of dentine. Vitro Fil (DFL, Rio de Janeiro, Brazil), Magic Glass (Vigodent, Rio de Janeiro, Brazil), Vitrebond (3M, Sumaré SP, Brazil), Riva Self Cure (SDI, Victoria, Australia), Riva Light Cure (SDI), Fill Magic (Vigodent), Opallis (FGM, Joinville, Brazil), Surefil SDR (Dentsply, Milford, DE), Tetric N (Ivoclar Vivadent, Schaan, Lichtenstein), Tetric (Ivoclar Vivadent), Hydro C (Dentsply, Petrópolis, Brazil), Hydcal (Technew, Madalena, Portugal) and Liner (Vigodent) showed radio-opacity similar to or greater than that of enamel for all thicknesses., Conclusions: The increased thickness of the materials studied increases their radio-opacity. Some commercially available GICs used as a base and liner for restorations have a very low radio-opacity (Ionomaster, Maxxion, Bioglass R, Bioglass F, Vidrion R and Vidrion F).

Aim: The aim of this study was to analyze and compare the influence of short-term NaOCl-storage and long-term water storage on the microtensile bond strength (µTBS) of etch-and-rinse adhesive system to human dentin., Materials and Methods: Thirty-six third human molars were randomly divided into 6 groups (n = 6) according to the aging protocol: G1 (water, 24 hours); G2 (water, 6 months); G3 (water, 12 months); G4 (10% sodium hypochlorite--NaOCl, 1 hour); G5 (10% NaOCl, 3 hours) and G6 (10% NaOCl, 5 hours). A two-step etch-and-rinse adhesive (Adper Single Bond 2) was applied according to the manufacturers' instructions. A composite (Filtek Z250) was applied in four horizontal increments and was individually cured. Specimens were cut following the microtensile test technique, submitted to the different aging protocols, and tested in tension. The fracture pattern was observed in a stereomicroscope (40* magnification) and in a scanning electron microscope. The µTBS data were analyzed by ANOVA and Tukey's test (α = 0.05)., Results: The effect of storage in 10% NaOCl for 1 or 3 hours was not significantly different from that of aging in distilled water (DW) for 6 or 12 months (p > 0.05). Beams immersed in DW for 24 hours and in 10% NaOCl for 5 hours showed the highest and lowest µTBS values respectively., Conclusion: The aging protocols negatively influenced dentin bond strength. Aging specimens in 10% NaOCl for 1 or 3 hours can be an alternative method for long-term water storage (6 or 12 months) bond strength studies., Clinical Significance: This aging protocol allows a quick achievement of longitudinal bond strength data, so that results are available to the professionals in this area while the materials are yet present at the dental market.

Aim: This study was undertaken to examine the effect of root canal (RT) sealers content and the cleaning procedure of RT walls on bond strength (BS) of a fiber reinforced composite (FRC) post cemented with resin-based or zinc phosphate cement., Materials and Methods: Forty bovine roots were divided into 2 groups (n = 20) and obturated with gutta-percha points plus Sealer 26 sealer or gutta-percha points plus N-Rickert sealer. In each group, half (n = 10) of intracanal walls was cleaned with ethanol and the other half with sulfuric ether. In each of these subgroups, half of intracanal posts (n = 5) were cemented with Bistite resin-based cement and half with zinc phosphate cement. Specimens were submitted to pull-out test and tensile force until post dislodgement. The maximum forces required for post removal was expressed in MPa, means were submitted to statistical analysis (Analysis of Variance Test, a = 0.05)., Results: Fiber reinforced composite cemented with zinc phosphate were significantly more retentive than those cemented with Bistite (p < 0.05). Regarding the influence of eugenol-based sealer on post retention, there was a statistically significant difference (p < 0.05) only between groups cemented with Bistite, in which canals filled with N-Rickert + gutta-percha showed lower BS than canals filled with Sealer 26 + gutta-percha., Conclusion: Despite endodontic cement used, higher pull-out bond strength were obtained when posts were cemented with zinc phosphate., Clinical Significance: The importance of ethanol or sulphuric ether application to properly replace water from intraradicular dentine still requires further investigations, especially to clarify if this technique may reduce the effect of aging and improve the stability of the bond, when used to cement fiber posts into the root canal.

This study aimed to evaluate the chemical interaction of collagen with some substances usually applied in dental treatments to increase the durability of adhesive restorations to dentin. Initially, the similarity between human dentin collagen and type I collagen obtained from commercial bovine membranes of Achilles deep tendon was compared by the Attenuated Total Reflectance technique of Fourier Transform Infrared (ATR-FTIR) spectroscopy. Finally, the effects of application of 35% phosphoric acid, 0.1M ethylenediaminetetraacetic acid (EDTA), 2% chlorhexidine, and 6.5% proanthocyanidin solution on microstructure of collagen and in the integrity of its triple helix were also evaluated by ATR-FTIR. It was observed that the commercial type I collagen can be used as an efficient substitute for demineralized human dentin in studies that use spectroscopy analysis. The 35% phosphoric acid significantly altered the organic content of amides, proline and hydroxyproline of type I collagen. The surface treatment with 0.1M EDTA, 2% chlorhexidine, or 6.5% proanthocyanidin did not promote deleterious structural changes to the collagen triple helix. The application of 6.5% proanthocyanidin on collagen promoted hydrogen bond formation., (Copyright © 2012 Wiley Periodicals, Inc.)

Objectives: The aim of this study was to describe roughness and gloss alterations of enamel after treatment with 38% hydrogen peroxide (HP) and after polishing with 2% neutral sodium fluoride (SF) or a dental tooth paste containing nanohydroxiapatite particles (nHA) using power spectral density (PSD) description, roughness parameters (Ra, RMS, and Z range) and gloss analysis., Methods: An atomic force microscope (AFM) and a spectrophotometer were used to analyze eighteen specimens of upper incisors. After initial analyses, all specimens were bleached with 38% HP for 135 min. The specimens were analyzed after bleaching. Nine specimens were polished with SF (Group Fluor) and the other nine specimens were polished with nHA (Group nHA), then all specimens were analyzed after polishing. Roughness and gloss were analyzed with ANOVA and Tukey's t-test., Results: No statistical difference was found for Ra and RMS among initial, after bleaching and after polishing in both groups. For Z range, Group nHA showed a significant decrease after polishing. Bleaching with 38% HP did not increase the PSD in the spatial frequency of the visible light spectrum range in both groups. After polishing, nHA group showed a decrease in PSD for all morphological wavelengths. Gloss did not show statistical difference after bleaching in both groups. Gloss showed significant increase after polishing with nHA., Significance: bleaching treatment with 38% HP didn't alter enamel surface roughness or gloss. PSD analyses were very suitable to identifying the morphological changes on the surfaces., (Copyright © 2011 Wiley Periodicals, Inc.)

Objective: The aim of this study was to assess by atomic force microscopy (AFM) the effect of Er,Cr:YSGG laser application on the surface microtopography of radicular dentin., Background: Lasers have been used for various purposes in dentistry, where they are clinically effective when used in an appropriate manner. The Er,Cr:YSGG laser can be used for caries prevention when settings are below the ablation threshold., Materials and Methods: Four specimens of bovine dentin were irradiated using an Er,Cr:YSGG laser (λ = 2.78 μm), at a repetition rate of 20 Hz, with a 750-μm-diameter sapphire tip and energy density of 2.8 J/cm(2) (12.5 mJ/pulse). After irradiation, surface topography was analyzed by AFM using a Si probe in tapping mode. Quantitative and qualitative information concerning the arithmetic average roughness (Ra) and power spectral density analyses were obtained from central, intermediate, and peripheral areas of laser pulses and compared with data from nonirradiated samples., Results: Dentin Ra for different areas were as follows: central, 261.26 (±21.65) nm; intermediate, 83.48 (±6.34) nm; peripheral, 45.8 (±13.47) nm; and nonirradiated, 35.18 (±2.9) nm. The central region of laser pulses presented higher ablation of intertubular dentin, with about 340-760 nm height, while intermediate, peripheral, and nonirradiated regions presented no difference in height of peritubular and interperitubular dentin., Conclusion: According to these results, we can assume that even when used at a low-energy density parameter, Er,Cr:YSGG laser can significantly alter the microtopography of radicular dentin, which is an important characteristic to be considered when laser is used for clinical applications.

The aim of this study was to investigate whether distinct cooling of low fluence erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser irradiation would influence adhesion. Main factors tested were: substrates (two), irradiation conditions (three), and adhesives (three). A 750 microm diameter tip was used, for 50 s, 1 mm from the surface, with a 0.25 W power output, 20 Hz, energy density of 2.8 J/cm(2) with energy per pulse of 12.5 mJ. When applied, water delivery rate was 11 ml/min. The analysis of variance (ANOVA) showed that laser conditioning significantly decreased the bond strength of all adhesive systems applied on enamel. On dentin, laser conditioning significantly reduced bond strength of etch-and-rinse and one-step self-etch systems; however, laser irradiation under water cooling did not alter bonding of two-step self-etching. It may be concluded that the irradiation with Er,Cr:YSGG laser at 2.8 J/cm(2) with water coolant was responsible for a better adhesion to dentin, while enamel irradiation reduced bond strength, irrespective of cooling conditions.

Aim: The aim of this study was to evaluate how cavity preparation and primer application methods influence the adhesion of composite resin to dentin using a self-etching system., Methods and Materials: Forty-eight extracted, sound human molars were divided into six groups (n=8) according to the method used for the surface preparation of the teeth (#600-grit paper disc, diamond bur, and Er:YAG laser) and the primer application method utilized (active or passive). Following the adhesive procedure using a self-etching system, 5 mm high composite buildups were created with Z-250 composite resin. After storage in water at 37 degrees C for 24 hours, the specimens were vertically sectioned into serial 1 mm2 sticks and tested for microtensile strength (micro-TBS). Nine additional molars were prepared for morphological analysis using scanning electron microscopy (SEM)., Results: Statistical analysis showed surface preparation technique (p < 0.00) and primer application methods (p < 0.001) do influence bond strength of the self-etching system tested. The best adhesion was achieved with specimens having the dentin ground with sandpaper followed by those ground with diamond burs. The worst bonding was obtained with Er:YAG laser ablated dentin. The active primer application method increased bonding performance compared to the passive method., Conclusions: Within the limitations of the study, it can be stated surface treatment can influence the bond strength of the self-etching system tested and the active primer application method is more effective in achieving success in bonding to dentin compared with the passive application method., Clinical Significance: Clinicians should use the active application method to apply a mild acidic self-etching primer along with an appropriate tooth surface preparation to facilitate the bond strength between dentin and composite resin.

A Human Teeth Bank (HTB) is a nonprofit institution, associated to a college, to a university or to some other institution. Its purpose is to fulfill academic needs, by supplying human teeth for research or for preclinical laboratory training of students, thus eliminating the illegal commerce of teeth that still takes place in dental schools. It is also up to an HTB to work for the elimination of cross-infection caused by indiscriminate handling of extracted teeth. In order to work properly, an HTB should have a strict control of its internal procedures, which include separation and stocking of teeth, as well as an appropriate maintaining of donors' and beneficiaries' records. In this article, we discuss the functions that an HTB can perform, and how the Human Teeth Bank, School of Dentistry, University of S o Paulo, works and organizes itself today.