Search

Initiated chemical vapor deposition is a versatile technique for synthesizing conformal polymer films on both planar and porous surfaces. It can retain functional groups and avoid undesired cross-linking. However, there is still room for enhancing its performance without altering the feed parameters. Here, we investigate a pulsed iCVD approach to improve the deposition process, achieved by switching on and off the resistively heated filament periodically. By strategically switching off the filament, a shortage of thermally activated primary radicals was created, which allowed uninterrupted chain propagation with fewer termination reactions and potentially increased monomer conversion rates. This has caused significantly faster deposition kinetics with a higher molecular weight and longer chain length for poly(glycidyl methacrylate) compared to continuous deposition. Spectra analyses confirmed that the functionality and stoichiometry ratios remained intact throughout the pulsed deposition process. The pulsed iCVD method is therefore a competitive and sustainable tool, demonstrating fast deposition kinetics and a well-preserved functionality.

Viscoelastic behavior can be beneficial in enhancing the unprecedented dynamics of polymer metamaterials or, in contrast, negatively impacting their wave control mechanisms. It is, therefore, crucial to properly characterize the viscoelastic properties of a polymer metamaterial at its working frequencies to understand viscoelastic effects. However, the viscoelasticity of polymers is a complex phenomenon, and the data on storage and loss moduli at ultrasonic frequencies are extremely limited, especially for additively manufactured polymers. This work presents a protocol to experimentally characterize the viscoelastic properties of additively manufactured polymers and to use them in the numerical analysis of polymer metamaterials. Specifically, the protocol includes the description of the manufacturing process, experimental procedures to measure the thermal, viscoelastic, and mechanical properties of additively manufactured polymers, and an approach to use these properties in finite-element simulations of the metamaterial dynamics. The numerical results are validated in ultrasonic transmission tests. To exemplify the protocol, the analysis is focused on acrylonitrile butadiene styrene (ABS) and aims at characterizing the dynamic behavior of a simple metamaterial made from it by using fused deposition modeling (FDM) three-dimensional (3D) printing. The proposed protocol will be helpful for many researchers to estimate viscous losses in 3D-printed polymer elastic metamaterials that will improve the understanding of material-property relations for viscoelastic metamaterials and eventually stimulate the use of 3D-printed polymer metamaterial parts in various applications.

We report a case of infective endocarditis with a septal abscess that was complicated with abnormal blood flow from the left ventricle to the right atrium (Gerbode defect) along with abnormal blood flow from the aorta to the right atrium (atrial-aortic fistula). This is the first reported case of successful correction of both defects by a percutaneous approach., Competing Interests: The authors have reported that they have no relationships relevant to the contents of this paper to disclose., (© 2024 The Authors.)

Plastic pollution poses a significant environmental challenge, necessitating the investigation of bioplastics with reduced end-of-life impact. This study systematically characterizes four promising bioplastics-polybutylene adipate terephthalate (PBAT), polybutylene succinate (PBS), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), and polylactic acid (PLA). Through a comprehensive analysis of their chemical, thermal, and mechanical properties, we elucidate their structural intricacies, processing behaviors, and potential morphologies. Employing an environmentally friendly process utilizing supercritical carbon dioxide, we successfully produced porous materials with microcellular structures. PBAT, PBS, and PLA exhibit closed-cell morphologies, while PHBV presents open cells, reflecting their distinct overall properties. Notably, PBAT foam demonstrated an average porous area of 1030.86 μm 2 , PBS showed an average porous area of 673 μm 2 , PHBV displayed open pores with an average area of 116.6 μm 2 , and PLA exhibited an average porous area of 620 μm 2 . Despite the intricacies involved in correlating morphology with material properties, the observed variations in pore area sizes align with the findings from chemical, thermal, and mechanical characterization. This alignment enhances our understanding of the morphological characteristics of each sample. Therefore, here, we report an advancement and comprehensive research in bioplastics, offering deeper insights into their properties and potential morphologies with an easy sustainable foaming process. The alignment of the process with sustainability principles, coupled with the unique features of each polymer, positions them as environmentally conscious and versatile materials for a range of applications.

Soft actuators that operate with overpressure have been successfully implemented as soft robotic grippers. Naturally, as these pneumatic devices are prone to cuts, self-healing properties are attractive. Here, we prepared a gripper that operates based on the liquid-gas phase transition of ethanol within its hollow structure. The gripping surface of the device is coated with a self-healing polymer that heals with heat. This gripper also includes a stainless steel wire along the device that heats the entire structure through resistive heating. This design results in a soft robotic gripper that actuates and heals in parallel driven by the same practical stimulus, that is, electricity. Compared to other self-healing soft grippers, this approach has the advantage of being simple and having autonomous self-healing. However, there remain fundamental drawbacks that limit its implementation. The current work critically assesses this overpressure approach and concludes with a broad perspective regarding self-healing soft robotic grippers.

Electrically conductive polymer nanocomposites have been the subject of intense research due to their promising potential as piezoresistive biomedical sensors, leveraging their flexibility and biocompatibility. Although intrinsically conductive polymers such as polypyrrole (PPy) and polyaniline have emerged as lucrative candidates, they are extremely limited in their processability by conventional solution-based approaches. In this work, ultrathin nanostructured coatings of doped PPy are realized on polyurethane films of different architectures via oxidative chemical vapor deposition to develop stretchable and flexible resistance-based strain sensors. Holding the substrates perpendicular to the reactant flows facilitates diffusive transport and ensures excellent conformality of the interfacial integrated PPy coatings throughout the 3D porous electrospun fiber mats in a single step. This allows the mechanically robust (stretchability > 400%, with fatigue resistance up to 1000 cycles) nanocomposites to elicit a reversible change of electrical resistance when subjected to consecutive cycles of stretching and releasing. The repeatable performance of the strain sensor is linear due to dimensional changes of the conductive network in the low-strain regime (ε ≤ 50%), while the evolution of nano-cracks leads to an exponential increase, which is observed in the high-strain regime, recording a gauge factor as high as 46 at 202% elongational strain. The stretchable conductive polymer nanocomposites also show biocompatibility toward human dermal fibroblasts, thus providing a promising path for use as piezoresistive strain sensors and finding applications in biomedical applications such as wearable, skin-mountable flexible electronics.

Alginate dialdehyde and l-lysine-functionalized alginate dialdehyde were prepared to provide active aldehyde and l-lysine sites along the alginate backbone, respectively. Different concentrations of substrates and the reduction agent were added, and their influence on the degree of l-lysine substitution was evaluated. An amination reduction reaction (with l-lysine) was conducted on alginate dialdehyde with a 31% degree of oxidation. The NMR confirmed the presence of l-lysine functionality with the degree of substitution of 20%. The structural change of the polymer was observed via FTIR spectroscopy, confirming the formation of Schiff base covalent linkage after the crosslinking. The additional l-lysine sites on functionalized alginate dialdehyde provide more crosslinking sites on the hydrogel, which leads to a higher modulus storage rate than in the original alginate dialdehyde. This results in dynamic covalent bonds, which are attributed to the alginate derivative-gelatin hydrogels with shear-thinning and self-healing properties. The results suggested that the concentration and stoichiometric ratio of alginate dialdehyde, l-lysine-functionalized alginate dialdehyde, and gelatin play a fundamental role in the hydrogel's mechanical properties.

A solvent-free route of initiated chemical vapor deposition (iCVD) was used to synthesize a bio-renewable poly(α-Methylene-γ-butyrolactone) (PMBL) polymer. α-MBL, also known as tulipalin A, is a bio-based monomer that can be a sustainable alternative to produce polymer coatings with interesting material properties. The produced polymers were deposited as thin films on three different types of substrates-polycarbonate (PC) sheets, microscopic glass, and silicon wafers-and characterized via an array of characterization techniques, including Fourier-transform infrared (FTIR), proton nuclear magnetic resonance spectroscopy ( 1 H NMR), ultraviolet visible spectroscopy (UV-vis), differential scanning calorimetry (DSC), size-exclusion chromatography (SEC), and thermogravimetric analysis (TGA). Optically transparent thin films and coatings of PMBL were found to have high thermal stability up to 310 °C. The resulting PMBL films also displayed good optical characteristics, and a high glass transition temperature ( T g ~164 °C), higher than the T g of its structurally resembling fossil-based linear analogue-poly(methyl methacrylate). The effect of monomer partial pressure to monomer saturation vapor pressure ( P m /P sat ) on the deposition rate was investigated in this study. Both the deposition rate and molar masses increased linearly with Pm/Psat following the normal iCVD mechanism and kinetics that have been reported in literature.

The purpose of this review is to critically assess the kinetic behavior of the furan/maleimide Diels-Alder click reaction. The popularity of this reaction is evident and still continues to grow, which is likely attributed to its reversibility at temperatures above 100 °C, and due to its biobased "roots" in terms of raw materials. This chemistry is used to form thermoreversible crosslinks in polymer networks, and thus allows the polymer field to design strong, but also end-of-life recyclable thermosets and rubbers. In this context, the rate at which the forward reaction (Diels-Alder for crosslinking) and its reverse (retro Diels-Alder for decrosslinking) proceed as a function of temperature is of crucial importance in assessing the feasibility of the design in real-life products. Differences in kinetics based from various studies are not well understood, but are potentially caused by chemical side groups, mass transfer limitations, and the analysis methods being employed. In this work, all the relevant studies are attempted to be placed in perspective with respect to each other, and thereby offer a general guide is offered on how to assess their recycling kinetics., (© 2022 The Authors. Macromolecular Rapid Communications published by Wiley-VCH GmbH.)

In this work, two novel routes to synthesis cross-linked polypropylene (PP) are introduced by using two different precursors (2-thiophenemethyl amine (TMA) and 1-(3 aminopropyl) imidazole (API)), both cross-linked with 1,1'-(methylenedi-4,1-phenylene) bismaleimide (BM) at two different annealing temperature values ( T = 50 °C and T = 150 °C). Both Diels-Alder (DA) and Michael addition reactions were successfully performed with TMA and API, respectively, albeit with different reactivity. Imidazole clearly shows a higher reactivity compared to thiophene. In addition, an increase in annealing temperature leads to a higher degree of cross-linking. The highest degree of cross-linking was obtained by the imidazole product after annealing at 150 °C (IMG1A150) as evident from the highest complex viscosity (|η*|) value of IMG1A150. A difference in rheology and thermal properties between the imidazole and thiophene cross-linked products was also observed. However, both products have superior melt properties and thermal stability compared with the starting material. They show processability at high temperatures. The melt flow behavior and de-cross-linking at higher temperatures can be tuned depending on the choice of imidazole or thiophene. This study shows an advance on the cross-linked PP processing and its product performances for further application on the commercial scale.

In this work, the possibility of preparing cross-linked polypropylene (PP) via Diels−Alder (DA) chemistry is explored. The overall strategy involves reaction of maleated polypropylene (the starting material), furfuryl amine (FFA), and bismaleimide (BM) as the cross-linking agent. The occurrence of reversible cross-linking was studied by checking the presence of relevant peaks in FTIR spectra, i.e., CH out-of-plane bending vibrations of the furan ring’s peak (γCH) at an absorption band of 730−734 cm−1, CH=CH of the BM aromatic ring’s stretching vibrations (υCH=CH) at an absorption band of 1510 cm−1, and the DA adduct (C-O-C, δDAring) at an absorption band of 1186 cm−1. In agreement with the spectroscopic characterization, the presence of a cross-linked network is also confirmed by rheology, namely the higher storage modulus (G′) compared with loss modulus (G″) value (G′ >> G″), as obtained via temperature sweep. Both the maleic anhydride (MA) content as well as the annealing temperature (50 °C and 120 °C) favor the DA reaction, while only partial de-cross-linking (retro DA) is observed at the higher temperature range of 150−200 °C. In addition, the products show higher mechanical robustness and thermal stability compared to the starting material.

Hydrogels have gained a lot of attention with their widespread use in different industrial applications. The versatility in the synthesis and the nature of the precursor reactants allow for a varying range of hydrogels with different mechanical and rheological properties. Understanding of the rheological behavior and the relationship between the chemical structure and the resulting properties is crucial, and is the focus of this review. Specifically, we include detailed discussion on the correlation between the rheological characteristics of hydrogels and their possible applications. Different rheological tests such as time, temperature and frequency sweep, among others, are described and the results of those tests are reported. The most prevalent applications of hydrogels are also discussed.

Polymers are an increasingly used class of materials in semiconductors, photovoltaics and energy storage. Polymers bearing triphenylamine (TPA) or its derivatives in their structures have shown promise for application in electrochemical energy storage devices. The aim of this work is to systematically synthesize polymers bearing TPA units either as pendant groups or directly along the backbone of the polymer and evaluate their performance as electrochemical energy storage electrode materials. The first was obtained via radical polymerization of an acrylate monomer bearing TPA as a side group, resulting in a non-conjugated polymer with individual redox active sites (rP). The latter was obtained by oxidative polymerization of a substituted TPA, resulting in a conjugated polymer with TPA units along its backbone (cP). These polymers were then developed into electrodes by separately blending them with multi-wall carbon nanotubes (rC and cC). The electrodes were characterized and their charge storage stability and mechanical properties were investigated for up to 1000 cycles by cyclic voltammetry, galvanostatic charge-discharge measurements and nanoindentation. The results show that cC offers a higher initial charge capacity than rC as well as improved carbon nanotube dispersion due to its conjugated structure. Although the improved dispersion results in a higher elastic modulus for cC (compared to rC), the stiffer nature of cP made it more vulnerable to degrade upon repetitive volumetric change, while with rP, the decoupled acrylate monomer remained more protected when its redox active units of TPA underwent charge-discharge cycling., Competing Interests: The authors state no conflict of interest., (This journal is © The Royal Society of Chemistry.)

Polymers crosslinked via furan/maleimide thermo-reversible chemistry have been extensively explored as reprocessable and self-healing thermosets and elastomers. For such applications, it is important that the thermo-reversible features are reproducible after many reprocessing and healing cycles. Therefore, side reactions are undesirable. However, we have noticed irreversible changes in the mechanical properties of such materials when exposing them to temperatures around 150 °C. In this work, we study whether these changes are due to the self-reaction of maleimide moieties that may take place at this rather low temperature. In order to do so, we prepared a furan-grafted polyketone crosslinked with the commonly used aromatic bismaleimide (1,1'-(methylenedi-4,1-phenylene)bismaleimide), and exposed it to isothermal treatments at 150 °C. The changes in the chemistry and thermo-mechanical properties were mainly studied by infrared spectroscopy, 1 H-NMR, and rheology. Our results indicate that maleimide self-reaction does take place in the studied polymer system. This finding comes along with limitations over the reprocessing and self-healing procedures for furan/maleimide-based reversibly crosslinked polymers that present their softening (decrosslinking) point at relatively high temperatures. On the other hand, the side reaction can also be used to tune the properties of such polymer products via in situ thermal treatments.

Nowadays, the self-healing approach in materials science mainly relies on functionalized polymers used as matrices in nanocomposites. Through different physicochemical pathways and stimuli, these materials can undergo self-repairing mechanisms that represent a great advantage to prolonging materials service-life, thus avoiding early disposal. Particularly, the use of the Joule effect as an external stimulus for self-healing in conductive nanocomposites is under-reported in the literature. However, it is of particular importance because it incorporates nanofillers with tunable features thus producing multifunctional materials. The aim of this review is the comprehensive analysis of conductive polymer nanocomposites presenting reversible dynamic bonds and their energetical activation to perform self-healing through the Joule effect.

Among smart materials, self-healing is one of the most studied properties. A self-healing polymer can repair the cracks that occurred in the structure of the material. Polyketones, which are high-performance thermoplastic polymers, are a suitable material for a self-healing mechanism: a furanic pendant moiety can be introduced into the backbone and used as a diene for a temperature reversible Diels-Alder reaction with bismaleimide. The Diels-Alder adduct is formed at around 50 °C and broken at about 120 °C, giving an intrinsic, stimuli-responsive self-healing material triggered by temperature variations. Also, reduced graphene oxide (rGO) is added to the polymer matrix (1.6-7 wt%), giving a reversible OFF-ON electrically conductive polymer network. Remarkably, the electrical conductivity is activated when reaching temperatures higher than 100 °C, thus suggesting applications as electronic switches based on self-healing soft devices.

This article reviews some of the intrinsic self-healing epoxy materials that have been investigated throughout the course of the last twenty years. Emphasis is placed on those formulations suitable for the design of high-performance composites to be employed in the aerospace field. A brief introduction is given on the advantages of intrinsic self-healing polymers over extrinsic counterparts and of epoxies over other thermosetting systems. After a general description of the testing procedures adopted for the evaluation of the healing efficiency and the required features for a smooth implementation of such materials in the industry, different self-healing mechanisms, arising from either physical or chemical interactions, are detailed. The presented formulations are critically reviewed, comparing major strengths and weaknesses of their healing mechanisms, underlining the inherent structural polymer properties that may affect the healing phenomena. As many self-healing chemistries already provide the fundamental aspects for recyclability and reprocessability of thermosets, which have been historically thought as a critical issue, perspective trends of a circular economy for self-healing polymers are discussed along with their possible advances and challenges. This may open up the opportunity for a totally reconfigured landscape in composite manufacturing, with the net benefits of overall cost reduction and less waste. Some general drawbacks are also laid out along with some potential countermeasures to overcome or limit their impact. Finally, present and future applications in the aviation and space fields are portrayed.

Low cross-link density thermally reversible networks were successfully synthesized from jatropha and sunflower oils. The oils were epoxidized and subsequently reacted with furfurylamine to attach furan groups onto the triglycerides, preferably at the epoxide sites rather than at the ester ones. Under the same reaction conditions, the modified jatropha oil retained the triglyceride structure more efficiently than its sunflower-based counterpart, i.e., the ester aminolysis reaction was less relevant for the jatropha oil. These furan-modified oils were then reacted with mixtures of aliphatic and aromatic bismaleimides, viz. 1,12-bismaleimido dodecane and 1,1'-(methylenedi-4,1-phenylene)bismaleimide, resulting in a series of polymers with T g ranging between 3.6 and 19.8 °C. Changes in the chemical structure and mechanical properties during recurrent thermal cycles suggested that the Diels-Alder and retro-Diels-Alder reactions occurred. However, the reversibility was reduced over the thermal cycles due to several possible causes. There are indications that the maleimide groups were homopolymerized and the Diels-Alder adducts were aromatized, leading to irreversibly cross-linked polymers. Two of the polymers were successfully applied as adhesives without modifications. This result demonstrates one of the potential applications of these polymers.

In this work, we prepared electrically conductive self-healing nanocomposites. The material consists of multi-walled carbon nanotubes (MWCNT) that are dispersed into thermally reversible crosslinked polyketones. The reversible nature is based on both covalent (Diels-Alder) and non-covalent (hydrogen bonding) interactions. The design allowed for us to tune the thermomechanical properties of the system by changing the fractions of filler, and diene-dienophile and hydroxyl groups. The nanocomposites show up to 1 × 10 4 S/m electrical conductivity, reaching temperatures between 120 and 150 °C under 20-50 V. The self-healing effect, induced by electricity was qualitatively demonstrated as microcracks were repaired. As pointed out by electron microscopy, samples that were already healed by electricity showed a better dispersion of MWCNT within the polymer. These features point toward prolonging the service life of polymer nanocomposites, improving the product performance, making it effectively stronger and more reliable., Competing Interests: The authors declare no conflict of interest.

Self-healing materials can prolong device life, but their relatively weak mechanical strength limits their applications. Introducing tunable metal-ligand interactions into self-healing systems can improve their mechanical strength. However, applying this concept to solid elastomers is a challenge. To address this need, polyurethane-containing metal complexes were fabricated by introduction of a pyridine-containing ligand into polyurethane, and subsequent coordination with Fe 2+ . The strong reversible coordination bond provides mechanical strength and self-healing ability. By optimizing the monomer ratio and Fe 2+ content, the resulting complex possesses a very high tensile strength of 4.6 MPa at strain of around 498 % and a high Young's modulus (3.2 MPa). Importantly, the metal complex exhibits an extremely high self-healing efficiency of approximately 96 % of tensile strength at room temperature and around 30 % at 5 °C. The complex is notch-insensitive and the fracture energy is 76186 J/m 2 , which is among the highest reported values for self-healing systems., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

[2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) is a well-studied sulfobetaine-methacrylate as its zwitterionic structure allows the synthesis of polymers with attractive properties like antifouling and anti-polyelectrolyte behavior. In the present work, we report the Cu⁰-mediated living radical polymerization (Cu⁰-mediated LRP) of SBMA in sodium nitrate aqueous solution instead of previously reported solvents like trifluoroethanol and sodium chloride aqueous/alcoholic solution. Based on this, starch-g-polySBMA (St-g-PSBMA) was also synthesized homogeneously by using a water-soluble waxy potato starch-based macroinitiator and CuBr/hexamethylated tris(2-aminoethyl)amine (Me₆TREN) as the catalyst. The structure of the macroinitiator was characterized by ¹H-NMR, 13 C-NMR, gHSQC, and FT-IR, while samples of PSBMA and St-g-PSBMA were characterized by ¹H-NMR and FT-IR. Monomer conversion was monitored by ¹H-NMR, on the basis of which the reaction kinetics were determined. Both kinetic study and GPC results indicate reasonable controlled polymerization. Furthermore, a preliminary study of the thermal response behavior was also carried through rheological tests performed on aqueous solutions of the prepared materials. Results show that branched zwitterionic polymers are more thermal-sensitive than linear ones.

This work reports on the healing of early stage fatigue damage in ionomer/nano-particulate composites. A series of poly(ethylene- co -methacrylic acid) zinc ionomer/Fe₃O₄ nanoparticle composites with varying amounts of ionic clusters were developed and subjected to different levels of fatigue loading. The initiated damage was healed upon localized inductive heating of the embedded nanoparticles by exposure of the particulate composite to an alternating magnetic field. It is here demonstrated that healing of this early stage damage in ionomer particulate composites occurs in two different steps. First, the deformation is restored by the free-shrinkage of the polymer at temperatures below the melt temperature. At these temperatures, the polymer network is recovered thereby resetting the fatigue induced strain hardening. Then, at temperatures above the melting point of the polymer phase, fatigue-induced microcracks are sealed, hereby preventing crack propagation upon further loading. It is shown that the thermally induced free-shrinkage of these polymers does not depend on the presence of ionic clusters, but that the ability to heal cracks by localized melting while maintaining sufficient mechanical integrity is reserved for ionomers that contain a sufficient amount of ionic clusters guaranteeing an acceptable level of mechanical stability during healing.

Traditional polyetherimides (PEIs) are commonly synthesized from an aromatic diamine and an aromatic dianhydride (e.g., 3,4'-oxidianiline (ODA) and 4,4'-oxidiphtalic anhydride (ODPA)) leading to the imide linkage and outstanding chemical, thermal and mechanical properties yet lacking any self-healing functionality. In this work, we have replaced the traditional aromatic diamine by a branched aliphatic fatty dimer diamine (DD1). This led to a whole family of self-healing polymers not containing reversible chemical bonds, capable of healing at (near) room temperature yet maintaining very high elastomeric-like mechanical properties (up to 6 MPa stress and 570% strain at break). In this work, we present the effect of the DD1/ODPA ratio on the general performance and healing behavior of a room temperature healing polyetherimide. A dedicated analysis suggests that healing proceeds in three steps: (i) an initial adhesive step leading to the formation of a relatively weak interface; (ii) a second step at long healing times leading to the formation of an interphase with different properties than the bulk material and (iii) disappearance of the damaged zone leading to full healing. We argue that the fast interfacial adhesive step is due to van der Waals interactions of long dangling alkyl chains followed by an interphase formation due to polymer chain interdiffusion. An increase in DD1/ODPA ratio leads to an increase in the healing kinetics and displacement shift of the first healing step toward lower temperatures. An excess of DD1 leads to the cross-linking of the polymer thereby restricting the necessary mobility for the interphase formation and limiting the self-healing behavior. The results here presented offer a new route for the development of room temperature self-healing thermoplastic elastomers with improved mechanical properties using fatty dimer diamines.

In this work, we correlate network dynamics, supramolecular reversibility and the macroscopic surface scratch healing behavior for a series of elastomeric ionomers based on an amorphous backbone with varying fractions of carboxylate pendant groups completely neutralized by Na(+), Zn(2+) or Co(2+) as the counter ions. Our results based on temperature dependent dynamic rheology with simultaneous FTIR analysis clearly indicate that the effective supramolecular bond lifetime (τ(b)) is an important parameter to ascertain the ideal range of viscoelasticity for good macroscopic healing. The reversible coordination increased with higher valence metal ions and ionic content. Both rheological and spectroscopic analyses show a decrease in supramolecular assembly with temperature. The temperature dependent τ(b) was used to calculate the activation energy (Ea) of dissociation for the ionic clusters. According to self-healing experiments based on macroscale surface scratching, a supramolecular bond lifetime between 10 and 100 s results in samples with complete surface scratch healing and good mechanical robustness.

Nature uses a variety of strategies to tune wetting behavior for biological applications. By artificially mimicking these strategies, a variety of different wetting conditions can be achieved. Numerous examples exist of designed surfaces that can mimic the wetting behavior of lotus leaves or rose petals, but few surfaces that may reversibly transition between the two have been reported. In this paper, a combination of topological control over conductive, carbon-based nanomaterials and low surface energy coating was used to tune the wetting properties between "lotus" and "rose." The topological control was imparted by a hierarchical "nanohybrid shish kebab" structure, which uses solution-grown polymer single crystals on carbon nanotubes to tune the surface roughness of the latter. The low surface energy polytetrafluoroethylene (PTFE) coating was deposited by the initiated chemical vapor deposition technique. Application of electric potential on these unique nanostructures allows the surfaces to reversibly transition between "lotus" and "rose" behavior. A further irreversible transition between "rose" and the fully wetted Wenzel wetting state was also predicted and shown. These materials show remarkable promise for lab-on-a-chip devices and surface passivation for biological studies.

Initiated chemical vapor deposition (iCVD) has been shown to be suitable for blanketing surfaces with thin polymer coatings of ≈1-2 nm and greater. In this work, iCVD coatings of polytetrafluoroethylene (PTFE) deposited on carbon nanotube (CNT)-based surfaces show CNT-templated PTFE single crystal growth. While the coating forms disoriented agglomerates when deposited on an amorphous carbon background, "shish-kebab" structures are observed when grown on single-walled carbon nanotubes (SWCNT) as well as CNT buckypaper. It is shown that the shish-kebab structure is composed of PTFE lamellae arranged with the chain backbones running parallel to the SWCNT axis. This result allows one to control not only the surface chemistry using PTFE but also the coating surface topology., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this work, initiated chemical vapor deposition (iCVD) has been employed as a one-step liquid-free process combining polymerization and coating for the encapsulation of 3D non-planar substrates. Coatings have been applied using iCVD specifically to encapsulate microparticles of a highly water-soluble crop protection compound (CPC) for controlled release. Release behavior has been compared among different coatings synthesized using different iCVD processing conditions, including varying degrees of polymer hydrophobicity, continuous and pulsed deposition, and crosslinking. iCVD has been found to provide tunable synthesis of hydrophobic, crosslinked polymers with control over mass diffusivity, and coating thickness for enhancing barrier properties., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The potential applications of the photon to thermal conversion technique by gold nanorods has attracted attention for biomedical applications since they show an intense absorption spectrum in the near-infrared region, and therefore, penetrate more deeply into biological tissues. The goal in this study is to assess a local heating phenomenon with a single patterned cluster of gold nanorods that are prepared as a wet chemically synthesized gold nanorod solution and mixed with aqueous 1% alginate and 0.1 M calcium chloride. In particular, we utilized the initiated chemical vapor deposition method to coat the cluster with poly(2-hydroxyethyl methacrylate) to enhance its high temperature resistance in the solution. The influence of the thermal energy on the surroundings is studied by measuring the surface temperature of the single patterned gold nanorod cluster as a function of laser irradiation time. The experimental results were compared with numerical simulation results. The results showed that the irradiated gold nanorods could rapidly heat to maximum surface temperatures of over 60 °C within 120 s. Furthermore, the temperature remained almost constant (i.e. reached a steady state) under continuous laser irradiation and rapidly cooled to the initial temperature within 90 s when the laser was turned off.

In this work, poly(2-hydroxyethyl methacrylate) (PHEMA), a widely used hydrogel, is synthesized using initiated chemical vapor deposition (iCVD), a one-step surface polymerization that does not use any solvents. iCVD synthesis is capable of producing linear stoichiometric polymers that are free from entrained unreacted monomer or solvent and, thus, do not require additional purification steps. The resulting films, therefore, are found to be noncytotoxic and also have low nonspecific protein adsorption. The kinetics of iCVD polymerization are tuned so as to achieve rapid deposition rates ( approximately 1.5 microm/min), which in turn yield ultrahigh molecular weight polymer films that are mechanically robust with good water transport and swellability. The films have an extremely high degree of physical chain entanglement giving rise to high tensile modulus and storage modulus without the need for chemical cross-linking that compromises hydrophilicity.

Background: Safety and efficacy studies of various mechanical circulatory support devices are important, but may not be strictly comparable. Lacking prospective randomized studies for different devices, we believe that comparison of risk factor analyses may give the surgeon a tool more powerful than current studies for matching a patient with an appropriate device. In this paper, we report risk factor profiles for bridge to transplantation with the CardioWest total artificial heart and summarize reports for other devices., Methods: A multiinstitutional risk factor analysis of the CardioWest total artificial heart, as a bridge to transplantation in 81 patients, was conducted. Univariate analyses were performed on 43 preimplantation prognostic factors. From this group, eight factors were chosen for multivariate analysis. Our results were compared with all recent risk factor analyses for other devices., Results: Independent predictors for death at three intervals by multivariate analysis were as follows: "implant to transplant": history of smoking (odds ratio, 34); "implant to 30 days after transplant": history of smoking (odds ratio, 10.00), prothrombin time greater than 16 seconds (odds ratio, 4.76); and "implant to 1 year after transplant": prothrombin time greater than 16 seconds (odds ratio, 3.85). The major difference between this experience and multiple reported experiences with left ventricular assist devices is that for left ventricular assist devices, but not for the temporary CardioWest total artificial heart, right heart failure, high central venous pressure, and being on a ventilator (with or without sepsis) were independent predictors of mortality., Conclusions: Risk factors for bridge to transplantation with the CardioWest total artificial heart are different from those reported for left ventricular assist devices. Recognition of these risk factor differences may facilitate appropriate device selection.

Background: Bridge to transplantation (BTT) is an accepted option when a donor heart is not available. Extensive clinical study has been done with BTT in the adult population, but comparatively fewer data are available in the pediatric population with regard to pulsatile devices., Methods: Ten pediatric patients are presented, all of whom underwent BTT or recovery with pneumatic paracorporeal systems. The Berlin Heart bi-ventricular assist device (BVAD) was utilized in 1 patient, the Medos VAD in 4 patients (1 left ventricular assist device [LVAD], 3 BVADs) and the Thoratec VAD in 5 patients (3 BVADs, 2 LVADs). The pediatric population consisted of 3 females and 7 males. Mean age of the population was 7.4 years, weight 25 kg and body surface area (BSA) 0.88 m(2). Etiology for heart failure consisted of 4 viral, 3 congenital and 3 idiopathic cardiomyopathies. Before implant, all patients had evidence of progressive cardiac failure despite inotropic support, and 2 patients had been on extracorporeal membrane oxygenation (ECMO). Mean duration on the device was 34.3 days (8 to 107 days)., Results: Two patients suffered stroke and recovered without sequelae. Two patients died of ischemic stroke and 1 of sepsis. Seven patients survived (6 transplanted and 1 weaned) for a survival rate of 70% compared with survival for ECMO as BTT, which was 40% to 50%. All survivors had complications related to bleeding, thromboembolic events and infections., Conclusions: The Thoratec VAD can be placed in small patients with large hearts that can accommodate the available cannulas. The Berlin Heart and the Medos VAD have a selection of ventricles with small stroke volumes. All 3 systems can be used successfully in the pediatric population as BTT with better survival than with ECMO.

Bridge to transplant is a well-known strategy to enable patients with congestive heart failure to live until transplant. A 15-year-old boy with Beckers' muscular dystrophy and cardiomyopathy was accepted for heart transplantation. He suffered a cardiac arrest and was placed on extracorporeal membrane oxygenator. A paracorporeal biventricular assist device and a total artificial heart were considered for bridge to transplant. A CardioWest total artificial heart was chosen because of the patient's size. Multiple left ventricular thrombi were identified at the time of the ventriculectomy. The patient did well with the total artificial heart was transplanted and discharged home. The unknown presence of significant left ventricular thrombi raises the question of outcome with a paracorporeal ventricular assist device.

Background: The SynCardia CardioWest total artificial heart (CardioWest TAH) is a biventricular, orthotopic, pneumatic, pulsatile blood pump driven by an external console. For each ventricle, the length of the blood-flow path is shorter and the inflow and outflow valves are larger than in any other bridge-to-transplant device, resulting in greater blood flow at smaller pre-load. Such a device should be optimal for bridging transplant candidates who have biventricular failure and for whom all other therapies have failed., Methods: From January 1, 1993, to April 1, 2002, we prospectively studied 62 consecutive CardioWest TAH implant recipients to document safety and efficacy in bridge to transplantation. We used multisystem monitoring and multidrug therapy for anti-coagulation in 58 patients starting September 1, 1994., Results: Before implantation, patients were critically ill with biventricular heart failure. Mortality in this group from the time of implantation until transplantation was 23%. Causes of death during device support included multi-organ failure (6), sepsis (3), and valve entrapment (2). Forty-eight patients underwent transplantation (77%). Forty-two survived to hospital discharge (68% of the total, 88% of those undergoing transplantation). Adverse events included bleeding (20%), device malfunction (5%), fit complications (3%), mediastinal infections (5%), visceral embolus (1.6%), and stroke during support (1.6%). The linearized stroke rate was 0.068 events per patient-year., Conclusions: Sixty-eight percent of critically ill transplant candidates for whom medical therapy failed were bridged to transplantation with the CardioWest TAH and survived long-term. Most deaths that occurred during device support were related to pre-implant problems. Infection and stroke were rare events. Therefore, we recommend the CardioWest TAH as the biventricular bridge-to-transplant device of choice.

A description of successful management of a patient who developed an empyema as a postoperative complication following the insertion of a CardioWest total artificial heart (TAH) as a bridge to cardiac transplantation is presented. By using traditional methods of management, the patient recovered and went on to transplant.

The observations in vivo of a non-linear, afterload-sensitive end-systolic pressure-volume relation (ESPVR) and a linear, load-insensitive preload recruitable stroke work (PRSW) relation may be reconciled by considering the PRSW as a product of both the ventricular ESPVR and the arterial elastance (Ea). We obtained pressure-volume data from eight conscious dogs. The ESPVR was nonlinear, and its trajectory was afterload-dependent. The PRSW was linear and load-independent. Arterial elastance changed with both acute reductions in preload and steady-state changes in afterload. The PRSW relation thus describes both myocardial function and ventricular-arterial interaction and is a useful index of cardiovascular performance in patients.

Chronic repetitive stimulation of skeletal muscle causes significant changes in contractile mechanics and makes the muscle fatigue resistant. The purpose of this study was to quantify the magnitude and time course of these changes. One latissimus dorsi muscle from each of 28 mongrel dogs was stimulated in situ at 1 Hz for 0, 3, 7, 14, 21, 42, or 70 days. Changes in isometric and isotonic mechanical performance were measured as a function of conditioning time. Isotonic force and velocity data were fitted to the Hill equation to obtain Vmax. The most striking early change was a 30 and 26% decline in muscle mass and cross-sectional area, respectively. Coincident with this was an approximate 40% decline in tetanic and twitch tension. There was a similar decline in the rates of rise and fall of twitch and tetanus tensions (+dT/dt and -dT/dt). The decline in tetanus +dT/dt and -dT/dt followed a similar time course, suggesting that these muscle functions were under similar influences. Calculation of the isometric force data per unit of cross-sectional area minimized the effect of stimulation on isometrically measured muscle function but did not eliminate it. Fusion frequency declined 52% with conditioning. The increases in time-to-peak twitch tension and half-relaxation time were independent of cross-sectional area. Time-to-peak twitch tension and half-relaxation time increased after 7 days of stimulation and became maximal after 42 or 70 days, respectively. Time-to-peak tetanus tension was unchanged by muscle conditioning. Changes in the force-velocity relationship began after 3 days of stimulation, changed very little between 3 and 21 days of stimulation, and showed another change after 42 and 70 days of stimulation. It may be possible to better modify the muscle for dynamic cardiomyoplasty by pharmacological or stimulation regimens once the mechanism of fiber switching is better understood.