120 results on '"Bonfante E."'
Search Results
2. Cone-beam computed tomography compared to X-ray in diagnosis of extremities bone fractures: A study of 198 cases
- Author
-
Ricci, Prof. M., Boldini, M., Bonfante, E., Sambugaro, E., Vecchini, E., Schenal, G., Magnan, B., and Montemezzi, S.
- Published
- 2019
- Full Text
- View/download PDF
3. Influence of straight versus angulated screw channel titanium bases on failure loads of two‐piece ceramic and titanium implants restored with screw‐retained monolithic crowns: An in‐vitro study
- Author
-
Helal, E., primary, Gierthmuehlen, P. C., additional, Bonfante, E. A., additional, Campos, T. M. B., additional, Prott, L. S., additional, Langner, R., additional, and Spitznagel, F. A., additional
- Published
- 2023
- Full Text
- View/download PDF
4. Effect of undigested neutral detergent fiber content of alfalfa hay on lactating dairy cows: Feeding behavior, fiber digestibility, and lactation performance
- Author
-
Fustini, M., Palmonari, A., Canestrari, G., Bonfante, E., Mammi, L., Pacchioli, M.T., Sniffen, G.C.J., Grant, R.J., Cotanch, K.W., and Formigoni, A.
- Published
- 2017
- Full Text
- View/download PDF
5. Technical note: In vitro digestibility of amylase-treated, ash-corrected neutral detergent fiber, with addition of sodium sulfite, at 240 hours with or without rumen fluid reinoculation
- Author
-
Palmonari, A., Canestrari, G., Bonfante, E., Fustini, M., Mammi, L., and Formigoni, A.
- Published
- 2017
- Full Text
- View/download PDF
6. Using single or multiple liquor-donor cows for in vitro digestibility of amylase- and sodium sulfite-treated neutral detergent fiber with ash correction
- Author
-
Palmonari, A., Canestrari, G., Fustini, M., Bonfante, E., Mammi, L., and Formigoni, A.
- Published
- 2016
- Full Text
- View/download PDF
7. Effects of a completely pelleted diet on growth performance in Holstein heifers
- Author
-
Bonfante, E., Palmonari, A., Mammi, L., Canestrari, G., Fustini, M., and Formigoni, A.
- Published
- 2016
- Full Text
- View/download PDF
8. A screening sampling plan to detect Mycobacterium avium subspecies paratuberculosis-positive dairy herds
- Author
-
Serraino, A., Arrigoni, N., Ostanello, F., Ricchi, M., Marchetti, G., Bonilauri, P., Bonfante, E., and Giacometti, F.
- Published
- 2014
- Full Text
- View/download PDF
9. Failure Load of Monolithic Lithium Disilicate Implant‐Supported Single Crowns Bonded to Ti‐base Abutments versus to Customized Ceramic Abutments after Fatigue
- Author
-
Spitznagel, F. A., primary, Bonfante, E. A., additional, Vollmer, F., additional, and Gierthmuehlen, P. C., additional
- Published
- 2021
- Full Text
- View/download PDF
10. Failure Load of Monolithic Lithium Disilicate Implant‐Supported Single Crowns Bonded to Ti‐base Abutments versus to Customized Ceramic Abutments after Fatigue.
- Author
-
Spitznagel, F. A., Bonfante, E. A., Vollmer, F., and Gierthmuehlen, P. C.
- Subjects
DENTAL crowns ,CYCLIC fatigue ,TITANIUM group ,CERAMICS ,WEIBULL distribution - Abstract
Purpose: This laboratory study analyzed the influence of retention mode (screw‐ vs cement retained) and fatigue application on the failure load of monolithic lithium‐disilicate (LDS) implant‐supported single crowns (ISSC). Material and Methods: A total of 72 samples of monolithic LDS (*Ivoclar Vivadent) ISSC were divided into three groups (n = 24) according to their type of retention mode: Group Ti‐CAD: Titanium base (SICvantage CAD/CAM Abutment red (SIC invent AG), screw‐retained milled monolithic LDS (IPS e.max CAD*); Group Ti‐P: Titanium base (SICvantage CAD/CAM Abutment red), screw‐retained pressed monolithic LDS (IPS e.max Press*) and Group Ti‐Cust: Titanium base with cemented press LDS (IPS e.max Press*) crown on a LDS (IPS e.max Press*) custom abutment. A mandibular first molar implant‐supported single crown model was investigated (Titanium implant: SICvantage‐max, SIC invent AG, diameter: 4.2 mm, length: 11.5 mm). Half of each group (n = 12) were exposed to fatigue with cyclic mechanical loading (F = 198 N, 1.2 million cycles) and simultaneous thermocycling (5‐55°C). Single load to failure testing was performed, before (Subgroups Ti‐CAD, Ti‐P, and Ti‐Cust) and after (Subgroups Ti‐CAD‐F, Ti‐P‐F, and Ti‐Cust‐F) fatigue. Weibull distribution was used to determine the characteristic strength and Weibull modulus differences between groups. Probability of survival at 900N load was calculated. Results: No samples failed during fatigue. Characteristic strength values were as follow: Ti‐CAD: 3259.5N, Ti‐CAD‐F: 2926N, Ti‐P: 2763N, Ti‐P‐F: 2841N, Ti‐Cust: 2789N, Ti‐Cust‐F: 2194N. Whereas no difference was observed between pressed or milled monolithic crowns cemented to Ti‐base, regardless of loading condition, fatigue decreased the characteristic strength of crowns cemented to custom abutments. Probability of survival at 900 N was not significantly different between groups. Conclusions: Screw‐retained pressed or milled monolithic LDS ISSC, cemented directly to Ti‐base abutments or LDS crowns cemented to custom ceramic abutments resist physiological chewing forces after simulated 5‐year aging in the artificial mouth and presented equally high probability of survival. However, a significant decrease in load to failure was observed in LDS crowns cemented to custom ceramic abutments after fatigue. Prospective clinical trials are needed to confirm the results of this laboratory investigation. [ABSTRACT FROM AUTHOR]
- Published
- 2022
- Full Text
- View/download PDF
11. Imágenes del depósito de gadolinio en el sistema nervioso central
- Author
-
Valenzuela, R, Arevalo, O, Tavera, A, Riascos, R, Bonfante, E, and Patel, R
- Subjects
Sistema nervioso central ,Nephrogenic systemic fibrosis ,Central nervous system ,Resonancia magnética ,Depósitos de Gadolinio ,Fibrosis sistémica nefrogénica ,Gadolinium deposits - Abstract
Las imágenes por resonancia magnética han mostrado ser de gran utilidad en el diagnóstico y seguimiento de múltiples enfermedades que afectan el sistema nervioso central. El gadolinio se ha utilizado ampliamente a nivel mundial. Se estima que desde su introducción se han administrado más de doscientos millones de dosis de MCBG en el mundo. Los medios de contraste basados en Gadolinio (MCBG) fueron considerados por mucho tiempo medicamentos con un alto perfil de seguridad, la literatura reporta incidencia de efectos adversos inmediatos como cefalea, mareo y alteración del sentido del gusto. Estudios realizados pocos años después de la introducción de los MCBG mostraron que había depósitos de gadolinio en los tejidos, pero no se conocía su significancia clínica Fue hasta 2006 cuando se publicaron los primeros reportes que asociaban el depósito tisular del ion gadolinio proveniente de los MCBG con una entidad inflamatoria sistémica del tejido conectivo similar a la escleroderma conocida como Fibrosis Sistémica Nefrogénica (FSN) en pacientes con falla renal crónica. En 2013 se describió por primera vez la asociación entre el uso de los MCBG y el aumento progresivo de la intensidad de señal del núcleo dentado y los globos pálidos en las imágenes de RM ponderadas en T1 sin medio de contraste. En esta revisión se describen los aspectos más relevantes de la fisiopatología de estos hallazgos considerando su diagnóstico diferencial. Magnetic resonance imaging has been shown to be very useful in the diagnosis and monitoring of multiple diseases affecting the central nervous system. Gadolinium has been used extensively worldwide. It has been estimated that since its introduction more than two hundred million doses of GBCA have been administered globally. Gadolinium-based contrast agents (GBCAs) were long considered medicines with a high safety profile, the literature reports incidences of immediate adverse effects such as headache, dizziness, and altered sense of taste. Studies performed a few years after the introduction of GBCA showed that there were gadolinium deposits in the tissues but their clinical significance was not known. It wasn’t until 2006 when the first reports were published that associated the gadolinium ion tissue deposits from GBCA with a systemic inflammatory entity of the connective tissue similar to scleroderma known as Nephrogenic Systemic Fibrosis (NSF), in patients with chronic renal failure. In 2013, the association between the use of GBCAs and the progressive increase in the signal intensity of the dentate nucleus and the globus pallidus in T1-weighted MRI images without contrast medium, was described for the first time. This review describes the most relevant aspects of the pathophysiology of these findings taking into account their differential diagnosis.
- Published
- 2017
12. Thoracolumbar Spine Trauma: Pearls and Pitfalls of the Newer Classification Systems
- Author
-
Bonfante, E., primary, Tenreiro, A., additional, Choi, J., additional, Supsupin, E., additional, and Riascos, R., additional
- Published
- 2018
- Full Text
- View/download PDF
13. Análise da Retenção de Coroas CAD/CAM Cimentadas em Pilares do Tipo Ti-Base por Meio do Teste de Tração Pull-Out
- Author
-
Machado, C M, primary, Lopes, A C O, additional, Jalkh, E B B, additional, Da Silva, C P E, additional, Piza, M M T, additional, Bonjardim, L R, additional, and Bonfante, E A, additional
- Published
- 2018
- Full Text
- View/download PDF
14. Compression strength and fractographic analyses between two indirect veneers materials
- Author
-
Oliveira, N.A., primary, Rodrigues, R.F., additional, Soares-Rusu, I.B.L., additional, Espinoza-Villavicencio, C.A., additional, Bonfante, E., additional, Francisconi, P.A.S., additional, and Borges, A.F.S., additional
- Published
- 2018
- Full Text
- View/download PDF
15. Imaging Findings in Kearns-Sayre Syndrome: A Typical Case of an Infrequent Pathology
- Author
-
Bonfante, E., primary, Koenig, M.K., additional, Adejumo, R.B., additional, Perinjelil, V.J., additional, and Riascos, R.F., additional
- Published
- 2017
- Full Text
- View/download PDF
16. Imágenes del depósito de gadolinio en el sistema nervioso central
- Author
-
Valenzuela, R, primary, Arevalo, O, additional, Tavera, A, additional, Riascos, R, additional, Bonfante, E, additional, and Patel, R, additional
- Published
- 2017
- Full Text
- View/download PDF
17. Aflatoxin in food and feed: a review (Part 1: aflatoxins and aflatoxicosis)
- Author
-
MARCHETTI, GIACOMO, SERRAINO, ANDREA, GIACOMETTI, FEDERICA, ROSMINI, ROBERTO, Bonfante E., Marchetti G., Serraino A., Giacometti F., Bonfante E., and Rosmini R.
- Subjects
food ,feed ,food and beverages ,aflatoxin ,heterocyclic compounds - Abstract
The aflatoxins are ubiquitous contaminants of food and feed produced by some Aspergillus spp. The effects of these toxins vary from acute, including rapid death, to chronic, like hepatocellular carcinoma. The International Agency for Research on Cancer has classified aflatoxin B1 in Group I carcinogens. They also affect animal health and productions and cause economic losses in agriculture industry. In this first part of the review we discuss the aflatoxins issue: synthesis, absorption, elimination and carry-over of aflatoxins, mechanisms of toxicity and cases of aflatoxicosis worldwide. The second part of the review (to be published in the next issue of Tecnica Molitoria) will analyse the major sources of exposure to aflatoxins and the contamination of food and feed, dedicating a specific chapter to the prevention methods.
- Published
- 2013
18. Isolation of Arcobacter butzleri in environmental and food samples in an industrial and an artisanal dairy plants
- Author
-
GIACOMETTI, FEDERICA, SERRAINO, ANDREA, MARCHETTI, GIACOMO, Bonerba E., FLORIO, DANIELA, Bonfante E., ZANONI, RENATO GIULIO, ROSMINI, ROBERTO, Giacometti F., Serraino A., Marchetti G., Bonerba E., Florio D., Bonfante E., Zanoni R.G., and Rosmini R.
- Subjects
Arcobacter ,Cheese ,cheese factory - Abstract
This study investigated the presence of Arcobacter species in two cheese factories; a total of twentytwo environmental samples and ten food samples were collected from an artisanal and an industrial cheese factory; Arcobacter species were isolated after enrichment, and isolates were identified at species level by multiplex-polymerase chain reaction assay. In the artisanal cheese factory Arcobacter spp. were isolated from several environmental samples, cow and water buffalo raw milk and ricotta cheese. In the industrial plant Arcobacter spp. were isolated from surfaces not in contact with food and from a cleaned surface in contact with food; no Arcobacter spp. was isolated from food. All isolates were identified as A. butzleri. To our knowledge this is a first report of the presence of A. butzleri in a ready to eat cheese produced for retail and, in addition, the isolation of A. butzleri in food processing surfaces in the two cheese factories could be assessed as a source of potential contamination for cheeses.
- Published
- 2013
19. Prevalenza della paratubercolosi in allevamenti da latte in sud Italia
- Author
-
MARCHETTI, GIACOMO, SERRAINO, ANDREA, GIACOMETTI, FEDERICA, Ricchi M., Bonfante E., Arrigoni N., AIVI, Marchetti G., Ricchi M., Serraino A., Giacometti F., Bonfante E., and Arrigoni N.
- Subjects
Mycobacterium avium paratuberculosis ,Latte - Abstract
La paratubercolosi colpisce i ruminanti in tutto il mondo. Mycobacterium avium subsp. paratuberculosis potrebbe avere un ruolo nell sviluppo di malattie nell’uomo, come il morbo di Crohn, ma la correlazione non è ancora stata dimostrata con certezza. Alcuni paesi extra UE stanno cominciando a richiedere l’importazione di prodotti MAP-free. L’Italia non ha ancora messo in atto un programma di controllo della malattia e la diffusione dell’infezione è ancora sconosciuta nelle regioni del Sud e del Centro Italia. Questo studio è stato effettuato con lo scopo di valutare la prevalenza dell’infezione in cinque regioni del Sud e Centro Italia. Campioni di latte di massa e filtri dell’impianto di mungitura sono stati raccolti da 780 allevamenti di bovini da latte e rispettivamente analizzati tramite ELISA e real-time PCR. In totale 155 dei 780 allevamenti (19,9%) sono risultati positivi al test ELISA e/o alla real-time PCR. Campioni di latte individuale sono quindi stati raccolti da tutti gli animale in produzione di ogni allevamento positivo e da una selezione random di allevamenti negativi aventi un numero di capi equiparabile a quello delle stalle positive. La prevalenza stimata varia da regione a regione tra il 2,8% e il 5,5%. I nostri risultati indicano che la malattia è ampiamente diffusa nelle cinque regioni. La prevalenza osservata potrebbe essere sottostimata
- Published
- 2013
20. Analisi Comparativa di sistemi nazionali di ritiro/richiamo degli alimenti
- Author
-
Liuzzo G., Bonfante E., SERRAINO, ANDREA, GIACOMETTI, FEDERICA, AIVI, Liuzzo G., Serraino A., Giacometti F., and Bonfante E.
- Subjects
Ritiro ,Richiamo ,Sicurezza alimentare - Abstract
Il richiamo o ritiro degli alimenti è uno strumento fondamentale per la gestione dei rischi e diversi Paesi hanno previsto nel proprio ordinamento giuridico un “Sistema” di richiamo degli alimenti a rischio. L'obiettivo principale dei “sistemi” analizzati è comune e consiste nella protezione della salute del consumatore attraverso l'azione di vigilanza e l'impegno da parte dell'operatore del settore alimentare di essere in grado di richiamare rapidamente dal mercato un alimento a rischio per la salute pubblica. L'analisi comparativa dei sistemi nazionali presi in esame, nella fattispecie quelli: dell'Unione Europea (U.E), Australia, Canada, Stati Uniti (U.S.A) e Cina, ha messo in evidenza differenze sul piano terminologico e giuridico. L'utilizzo dei termini Ritiro e/o Richiamo ha significati diversi nell'ordinamento giuridico europeo rispetto agli altri paesi extracomunitari analizzati. Sul piano giuridico si distinguono due “sistemi”: l'uno obbligatorio (U.E. e Cina) e l'altro volontario (U.S.A, Canada e Australia). Diverse sono le sfumature che caratterizzano invece il ruolo e le funzioni delle autorità competenti nei diversi modelli, tutti ispirati al principio della collaborazione.
- Published
- 2013
21. Isolamento di Arcobacter butzleri in campioni ambientali e alimentari in un caseificio industriale ed artigianale
- Author
-
GIACOMETTI, FEDERICA, SERRAINO, ANDREA, MARCHETTI, GIACOMO, FLORIO, DANIELA, ZANONI, RENATO GIULIO, ROSMINI, ROBERTO, Bonerba E., Bonfante E., AIVI, Giacometti F., Serraino A., Marchetti G., Bonerba E., Florio D., Bonfante E., Zanoni R.G., and Rosmini R.
- Subjects
Arcobacter ,caseifici - Abstract
Il presente studio ha valutato la presenza di specie di Arcobacter in due caseifici; ventidue campioni ambientali e dieci campioni alimentari sono stati raccolti presso un caseificio artigianale ed uno industriale; la ricerca di Arcobacter spp. è stata effettuata tramite arricchimento e gli isolati sono stati identificati mediante multiplex-PCR. Ceppi di Arcobacter spp. sono stati isolati, nel caseificio artigianale, in numerosi campioni ambientali, di latte crudo vaccino e bufalino e ricotta mentre, nello stabilimento industriale, in alcuni campioni di superfici a contatto e non a contatto con alimenti; nessun Arcobacter spp. è stato rilevato in campioni alimentari. Tutti gli isolati sono stati identificati come A. butzleri. Il presente studio è il primo report della presenza di A. butzleri in un formaggio pronto per la vendita al dettaglio; l'isolamento di A. butzleri in superfici di lavorazione di entrambi i caseifici potrebbe essere una potenziale fonte di contaminazione per la produzione di formaggi.
- Published
- 2013
22. Aflatoxin in food and feed: a review. Part II: situation, prevention and reduction
- Author
-
MARCHETTI, GIACOMO, SERRAINO, ANDREA, GIACOMETTI, FEDERICA, ROSMINI, ROBERTO, Bonfante E., Marchetti G., Serraino A., Giacometti F., Bonfante E., and Rosmini R.
- Subjects
food ,feed ,technology, industry, and agriculture ,food and beverages ,aflatoxin ,heterocyclic compounds ,biological factors - Abstract
The aflatoxins are ubiquitous contaminants of food and feed produced by some Aspergillus spp.. The effects of these toxins vary from acute, including rapid death, to chronic, like hepatocellular carcinoma. The International Agency for Research on Cancer has classified aflatoxin B1 in Group I carcinogens. They also affect animal health and productions and cause economic losses in agriculture industry. In this review we discuss the aflatoxins issue: synthesis, absorption, elimination and carry-over of aflatoxins, mechanisms of toxicity and cases of aflatoxicosis worldwide. The review analyses the major sources of exposure to aflatoxins and the contamination of food and feed, dedicating a specific chapter to the prevention methods.
- Published
- 2013
23. Surface characterization and in vivo evaluation of laser sintered and machined implants followed by resorbable-blasting media process: A study in sheep
- Author
-
Bowers, M, primary, Yoo, D, additional, Marin, C, additional, Gil, L, additional, Shabaka, N, additional, Goldstein, M, additional, Janal, M, additional, Tovar, N, additional, Hirata, R, additional, Bonfante, E, additional, and Coelho, P, additional
- Published
- 2016
- Full Text
- View/download PDF
24. Failure modes of Y-TZP crowns at different cusp inclines
- Author
-
Bonfante, E A, Sailer, I, Silva, N R F A, Thompson, V P, Dianne Rekow, E, Coelho, P G, and University of Zurich
- Subjects
10068 Clinic of Reconstructive Dentistry ,610 Medicine & health ,3500 General Dentistry - Published
- 2010
- Full Text
- View/download PDF
25. Microcomputed Tomography Evaluation of Polymerization Shrinkage of Class I Flowable Resin Composite Restorations.
- Author
-
Sampaio, C. S., Chiu, K.-J., Farrokhmanesh, E., Janal, M., Puppin-Rontani, R. M., Giannini, M., Bonfante, E. A., Coelho, P. G., and Hirata, R.
- Subjects
COMPUTED tomography ,DENTAL fillings - Abstract
The present study aimed to characterize the pattern and volume of polymerization shrinkage of flowable resin composites, including one conventional, two bulk fill, and one self-adhesive. Standardized class I preparations (2.5 mm depth × 4 mm length × 4 mm wide) were performed in 24 caries-free human third molars that were randomly divided in four groups, according to the resin composite and adhesive system used: group 1 = Permaflo + Peak Universal Bond (PP); group 2 = Filtek Bulk Fill + Scotchbond Universal (FS); group 3 = Surefil SDR + XP Bond (SX); and group 4 = Vertise flow self-adhering (VE) (n=6). Each tooth was scanned three times using a microcomputed tomography (μCT) apparatus. The first scan was done after the cavity preparation, the second after cavity filling with the flowable resin composite before curing, and the third after it was cured. The lCT images were imported into three-dimensional rendering software, and volumetric polymerization shrinkage percentage was calculated for each sample. Data were submitted to one-way analysis of variance and post hoc comparisons. No significant difference was observed among PP, FS, and VE. SX bulk fill resin composite presented the lowest values of volumetric shrinkage. Shrinkage was mostly observed along the occlusal surface and part of the pulpal floor. In conclusion, polymerization shrinkage outcomes in a 2.5-mm deep class I cavity were material dependent, although most materials did not differ. The location of shrinkage was mainly at the occlusal surface. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
26. μCT evaluation of volume changes of regular versus low-shrinkage composites
- Author
-
Hirata, R., primary, Clozza, E., additional, Giannini, M., additional, Janal, M., additional, Tovar, N., additional, Bonfante, E., additional, and Coelho, P.G., additional
- Published
- 2014
- Full Text
- View/download PDF
27. A Critical Perspective on Mechanical Testing of Implants and Prostheses.
- Author
-
Bonfante, E. A. and Coelho, P. G.
- Subjects
AGE distribution ,ELASTICITY ,DENTAL implants ,MASTICATORY muscles ,MATERIALS testing ,DENTAL occlusion ,PROBABILITY theory ,COMPLICATIONS of prosthesis ,RESEARCH funding ,PHYSIOLOGIC strain ,DESCRIPTIVE statistics ,IN vitro studies - Abstract
The degree of interplay among variables in dental implant treatment presents a challenge to randomized clinical trials attempting to answer questions in a timely, unbiased, and economically feasible fashion. Further adding complexity to the different scenarios is the varied implant designs and related bone response, area of implantation, implant bulk material, restoration, abutments and related screws, fixation mode (screwed, fixed, or a combination), and horizontal implant-abutment matching geometry. This article critically appraises the most common mechanical testing methods used to characterize the implant-prostheses complex. It attempts to provide insight into the process of construction of an informed database of clinically relevant questions regarding preclinical evaluation of implant biomechanics and failure mechanisms. The use of single load to failure, fatigue life, fatigue limit, and step-stress accelerated life testing is discussed with emphasis on their deliverables, weaknesses, and strengths. Fractographic analysis and challenges in the correlation between laboratory- and in-service-produced failures of dental ceramics, resin composites, and titanium are introduced. In addition, examples are presented of mechanical characterization studies used in our laboratory to assess some implant-supported rehabilitation variables. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
28. O134 Minilaparotomy – a minimally invasive (3–4 cm incision) approach for total hysterectomy, even in large uterus. Some suggestions to the original technique
- Author
-
Bonfante, E., primary, Marquez, G., additional, Castillo, M., additional, Castro, N., additional, and Moctezuma, J., additional
- Published
- 2009
- Full Text
- View/download PDF
29. Laboratory Simulation of Y-TZP All-ceramic Crown Clinical Failures.
- Author
-
Coelho, P. G., Bonfante, E. A., Silva, N. R. F., Rekow, E. D., and Thompson, V. P.
- Subjects
DENTAL crowns ,PARTIAL denture complications ,DENTAL ceramics ,DENTAL veneers ,DENTAL bonding ,ZIRCONIUM oxide - Abstract
Clinically, zirconia-supported all-ceramic restorations are failing by veneer-chipping without exposing the zirconia interface. We hypothesized that mouth motion step-stress-accelerated fatigue testing of standardized dental crowns would permit this previously unrecognized failure mode to be investigated. Using CAD software, we imported the average dimensions of a mandibular first molar crown and modeled tooth preparation. The CAD-based tooth preparation was rapid-prototyped as a die for fabrication of zirconia core porcelain-veneered crowns. Crowns were bonded to aged composite reproductions of the preparation and aged 14 days in water. Crowns were single-cycle-loaded to failure or mouth-motion step-stress-fatigue-tested. Finite element analysis indicated high stress levels below the load and at margins, in agreement with only single-cycle fracture origins. As hypothesized, the mouth motion sliding contact fatigue resulted in veneer chipping, reproducing clinical findings allowing for investigations into the underlying causes of such failures. [ABSTRACT FROM AUTHOR]
- Published
- 2009
- Full Text
- View/download PDF
30. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: Comparison of failure modes and reliability after fatigue
- Author
-
Guess, P. C., Ricardo Alexandre Zavanelli, Silva, N. R. F. A., Bonfante, E. A., Coelho, P. G., and Thompson, V. P.
31. Effect of undigested neutral detergent fiber content of alfalfa hay on lactating dairy cows: Feeding behavior, fiber digestibility, and lactation performance
- Author
-
G. C. J. Sniffen, Ludovica Maria Eugenia Mammi, Andrea Formigoni, Giorgia Canestrari, K. W. Cotanch, Maria Teresa Pacchioli, Elena Bonfante, Mattia Fustini, Alberto Palmonari, R. J. Grant, Fustini, M., Palmonari, A, Canestrari, G., Bonfante, E., Mammi, L., Pacchioli, M.T., Sniffen, G.C.J., Grant, R.J., Cotanch, K.W., and Formigoni, A.
- Subjects
Dietary Fiber ,0301 basic medicine ,Rumen ,Soybean meal ,Drinking ,Forage ,Feces ,03 medical and health sciences ,Latin square ,Alfalfa hay digestibility ,Genetics ,Animals ,Lactation ,Dry matter ,Food science ,Total-tract digestibility ,Meal ,Chemistry ,0402 animal and dairy science ,food and beverages ,Feeding Behavior ,04 agricultural and veterinary sciences ,Animal Feed ,040201 dairy & animal science ,Neutral Detergent Fiber ,Milk ,030104 developmental biology ,UNDF240 ,Fermentation ,Hay ,Cattle ,Digestion ,Female ,Animal Science and Zoology ,Medicago sativa ,Food Science - Abstract
The objective of this study was to investigate the effects of 2 alfalfa hays differing in undigested neutral detergent fiber content and digestibility used as the main forage source in diets fed to high producing cows for Parmigiano-Reggiano cheese production. Diets were designed to have 2 different amounts of undigestible NDF [high (Hu) and low (Lu)], as determined by 240-h in vitro analysis (uNDF240). Alfalfa hay in vitro digestibility [% of amylase- and sodium sulfite-treated NDF with ash correction (aNDFom)] at 24 and 240 h was 40.2 and 31.2% and 53.6 and 45.7% for low- (LD) and high-digestibility (HD) hays, respectively. The 4 experimental diets (Hu-HD, Lu-HD, Hu-LD, and Lu-LD) contained 46.8, 36.8, 38.8, and 30.1% of alfalfa hay, respectively, 8.6% wheat straw, and 35.3% corn (50% flake and 50% meal; DM basis). Soy hulls and soybean meal were used to replace hay to balance protein and energy among diets. Eight multiparous Holstein cows (average milk production = 46.0 ± 5.2 kg/d, 101 ± 38 d in milk, and 662 ± 42 kg of average body weight) were assigned to a 4 × 4 Latin square design, with 2 wk of adaptation and a 1-wk collection period. Dry matter and water intake, rumination time, ruminal pH, and milk production and composition were measured. Diets and feces were analyzed for NDF on an organic matter basis (aNDFom), acid detergent fiber, acid detergent lignin, and uNDF240 to estimate total-tract fiber digestibility. Dry matter intake and rumination times were higher in HD diets compared with LD diets, regardless of forage amount. Rumination time was constant per unit of dry matter intake but differed when expressed as a function of uNDF240, aNDFom, or physically effective NDF intake. No differences were found among treatments on average ruminal pH, but the amount of time with pH
- Published
- 2017
- Full Text
- View/download PDF
32. Technical note: In vitro digestibility of amylase-treated, ash-corrected neutral detergent fiber, with addition of sodium sulfite, at 240 hours with or without rumen fluid reinoculation
- Author
-
Andrea Formigoni, Giorgia Canestrari, Alberto Palmonari, Mattia Fustini, Elena Bonfante, Ludovica Maria Eugenia Mammi, Palmonari, A, Canestrari, G., Bonfante, E., Fustini, M., Mammi, L., and Formigoni, A.
- Subjects
Dietary Fiber ,0301 basic medicine ,Rumen ,Silage ,Detergents ,Zea mays ,03 medical and health sciences ,chemistry.chemical_compound ,Animal science ,Genetics ,Animals ,Animal Science ,Amylase ,Sodium sulfite ,biology ,long-term fermentation ,0402 animal and dairy science ,food and beverages ,04 agricultural and veterinary sciences ,in vitro aNDFom digestibility ,040201 dairy & animal science ,Neutral Detergent Fiber ,030104 developmental biology ,chemistry ,Biochemistry ,reinoculation proce ,Amylases ,Fermentation ,Hay ,biology.protein ,Digestion ,Animal Science and Zoology ,Food Science - Abstract
Long-term in vitro fermentation (240 h) evaluating amylase-treated, ash-corrected neutral detergent fiber, with addition of sodium sulfite (aNDFom) digestibility is required to quantify the indigestible fiber fraction. It is commonly accepted to inoculate rumen fluid more than one time during such fermentations, every 96 h or at 120 h. However, no studies have been conducted to verify if the reinoculation is actually required to properly carry out the fermentation process. The current study aims to evaluate the effects of these procedures on aNDFom digestibility at 240 h. The study was conducted on a total of 24 forage samples (8 alfalfa hays, 8 grass hays, and 8 corn silages). Samples were digested in triplicate at 240 h in vitro. Rumen fluid was added twice (at 96 and 192 h) in treatment 1, after 120 h in treatment 2, whereas no addition was made in treatment 3. At the end of the fermentations, residual aNDFom was quantified to calculate digestibility. Among treatments, no difference was found in digestibility of aNDFom. Moreover, treatment 1 resulted in higher variability compared with other treatments. Results obtained in the current study show that subsequent addition of rumen fluid is not necessary for a proper estimation of aNDFom digestibility, and can be avoided.
- Published
- 2017
- Full Text
- View/download PDF
33. Formaggi del territorio: aspetti produttivi e di salubrità. Atti del Convegno conclusivo del Progetto 'Biodiversità, Territorio e Nutrizione: la sostenibilità dell’agro-alimentare italiano_ TERRAVITA'
- Author
-
FORMIGONI, ANDREA, SERRAINO, ANDREA, GRILLI, ESTER, GIACOMETTI, FEDERICA, FUSTINI, MATTIA, MAMMI, LUDOVICA MARIA EUGENIA, BONFANTE, ELENA, CANESTRARI, GIORGIA, PALMONARI, ALBERTO, angela polito e federica intorre, Angela Polito e Federica Intorre, Formigoni, A., Serraino, A., Grilli, E., Giacometti, F., Fustini, M., Mammi, M., Bonfante, E., Canestrari, G., and Palmonari, A. .
- Subjects
alimentazione animale, formaggi, tipicità, sicurezza - Published
- 2017
34. Effects of a completely pelleted diet on growing performance of Holstein heifers
- Author
-
Mattia Fustini, Alberto Palmonari, Andrea Formigoni, Giorgia Canestrari, Elena Bonfante, Ludovica Maria Eugenia Mammi, Bonfante, E., Palmonari, A., Mammi, L., Canestrari, G., Fustini, M., and Formigoni, A.
- Subjects
Dietary Fiber ,0301 basic medicine ,Rumen ,Forage ,Total mixed ration ,Biology ,Feed conversion ratio ,03 medical and health sciences ,Pellet ,Genetics ,Animals ,Lactation ,Dry matter ,Food science ,Silage ,pellet, fiber particle size, potentially digestible neutral detergent fiber digestibility ,0402 animal and dairy science ,04 agricultural and veterinary sciences ,Animal Feed ,040201 dairy & animal science ,Diet ,Neutral Detergent Fiber ,030104 developmental biology ,Cattle ,Digestion ,Female ,Animal Science and Zoology ,Food Science - Abstract
Forage neutral detergent fiber (NDF) content and particle size are important factors that affect rumen function. The aim of the current study was to evaluate the effects on rumen health, NDF digestibility, and animal performance of pelleting a forage-based diet. Eight Holstein heifers (age 336 ± 30 d, body weight 346 ± 35 kg) were randomly assigned to a repeated crossover design. Animals were housed in tie-stalls and fed for ad libitum intake. The study included 4 periods of 3 wk, the first 2 wk for adaptation to the diet and the last wk for data collection. Diets had the same ingredients but had a different physical form: total mixed ration (TMR) and pellet (diameter = 8 mm). The physically effective NDF (peNDF) differed between the 2 treatments (39.8 and 11.8% of NDF in the TMR and pellet diets, respectively). During the trial, dry matter intake (DMI), water intake, rumination time, rumen temperature, and pH were evaluated daily. Fecal samples were collected in wk 3 of each period to determine total-tract digestibility of the potential digestible (pd)NDF. Average daily gain and feed conversion ratio were calculated at the end of each period. With the pellet diet, DMI, DMI/body weight, and water consumption were higher. We observed no significant difference in average daily gain or feed conversion ratio. Rumination time was lower for the pellet diet than for the TMR diet (241 vs. 507 min/d, respectively). Diet had no effect on rumen temperature or rumen pH. The total-tract digestibility of the pdNDF was greater with the TMR diet than with the pellet diet (90.25 vs. 86.82% pdNDF, respectively). The results of the current study suggest that a complete-feed pellet diet was well accepted by the animals, as demonstrated by higher DMI. Rumination time was reduced with the pellet diet, but rumen pH was not different. The pdNDF digestibility was high for both diets, but significantly higher for the TMR diet. Given that animal performance was similar between the 2 diets, although they differed with respect to DMI and fiber digestion, we hypothesize that the 2 diets had different retention times, related to their physical form. A complete-feed pellet diet formulated to provide a sufficient level of NDF from forages could be fed to growing ruminants without apparent negative effects on rumen health and animal productivity, at least for a short period. More research over a longer growing period is needed before recommending this feeding strategy for growing heifer
- Published
- 2016
35. Health, milk yield and quality for Parmigiano Reggiano cheese evaluated in cows fed OmniGen-AF® from dry-off to 150 days in milk
- Author
-
MAMMI, LUDOVICA MARIA EUGENIA, FUSTINI, MATTIA, BONFANTE, ELENA, PALMONARI, ALBERTO, CANESTRARI, GIORGIA, FORMIGONI, ANDREA, Mammi, L.M.E., Fustini, M., Bonfante, E., Palmonari, A., Canestrari, G., and Formigoni, A.
- Published
- 2015
36. Complete diet in pellet for ruminants nutrition
- Author
-
BONFANTE, ELENA, FUSTINI, MATTIA, PALMONARI, ALBERTO, CANESTRARI, GIORGIA, Negri, N., FORMIGONI, ANDREA, rosanna scipioni, Bonfante, E., Fustini, M., Palmonari, A., Canestrari, G., Negri, N., and Formigoni, A.
- Subjects
Pelleted diet, ruminants, ruminal pH and rumination - Abstract
The aim of this study was to evaluate nutritional and dietetic effects, rumen pH and rumination time of a pelleted forage based diet fed to growing heifers compared to TMR one. Eight tie-stall heifers (age 336±30d, BW 346±35 kg), were used in a 12 weeks study (4 periods of 3 weeks: 2 adaptive and 1 for data collection). Diets had the same ingredients (hay 41.8%, barley straw 27.4%, sunflower 13.7%, grain 16.4%, salt 0.7%), but fed in two different physical forms: TMR and PELLET (∅=8mm), thus differing in fiber particle size (pef= 38,73% and 66.12% respectively). The animals, divided in two groups, were fed ad libitum with the two diets to alternate periods, and dry matter intake (DMI), DMI/BW (%), water intake, rumination time, rumen temperature and pH (average, pH area
- Published
- 2015
37. Temporal variation of faecal shedding of Escherichia coli O157:H7 in a dairy herd producing raw milk for direct human consumption
- Author
-
Lia Bardasi, Mattia Fustini, Andrea Serraino, Federica Giacometti, Laura Stancampiano, Roberta Taddei, Ilaria Guarniero, Ester Grilli, Mauro Delogu, Giuseppe Merialdi, Elena Bonfante, Antonietta Di Francesco, Merialdi G., Bardasi L., Stancampiano L., Taddei R., Delogu M., Di Francesco A., Guarniero I., Grilli E., Fustini M., Bonfante E., Giacometti F., and Serraino A.
- Subjects
milk ,Veterinary medicine ,lcsh:TP368-456 ,E. coli O157 ,Raw milk ,Biology ,medicine.disease_cause ,lcsh:Food processing and manufacture ,fluids and secretions ,Animal science ,Environmental temperature ,Average size ,dairy ,Herd ,medicine ,Escherichia coli ,Barn (unit) ,E. coli O157:H7, Dairy farm, Raw milk ,Food Science - Abstract
The objective of this study was to analyse over time the evolution of E. coli O157:H7 faecal shedding in a dairy herd producing raw milk for direct human consumption. The study was performed between October 2012 and September 2013 in an average size Italian dairy farm where animals are housed inside the barn all over the year. The farm housed about 140 animals during the study – 70 cows and 70 calves and heifers. Twenty-six animals were randomly selected from both the cows and young animals group, and faecal sampling was performed rectally six times two months apart in each animal. Eleven animals were culled during the study and a total of 285 faecal samples were collected. At each faecal sampling, three trough water samples and two trough feed samples were also collected for a total of 36 water samples and 24 feed samples. Samples were analysed by real time polymerase chain reaction (RT-PCR) and culture. Overall, 16 (5.6%) faecal samples were positive for E. coli O157 by RT-PCR. Cultural examination found 9 (3.1%) samples positive for E. coli O157; all the isolates were positive for stx1, stx 2 and eae genes. One (4.1%) feed sample was positive for E. coli O157 by RT-PCR; none of the water samples was positive for E. coli O157. The model highlighted a general significant reduction of the number of positive samples observed during the study from the first to the sixth sampling (P=0.000) and a positive relation between the presence of positive samples and average environmental temperature (P=0.003). The results of the study showed that in an Italian dairy farm housing animals all year, faecal shedding of E. coli O157 followed the same temporal trend reported for other types of farming. The enhanced faecal shedding during warmer months may have a significant impact on environmental contamination and the safety of raw milk and its byproducts.
- Published
- 2014
- Full Text
- View/download PDF
38. Variazione temporale dell’eliminazione fecale di Escherichia coli O157:H7 in un allevamento di bovine da latte autorizzato alla vendita di latte crudo
- Author
-
Merialdi G., Bardasi L., STANCAMPIANO, LAURA, Taddei R., DELOGU, MAURO, DI FRANCESCO, ANTONIETTA, GUARNIERO, ILARIA, GRILLI, ESTER, FUSTINI, MATTIA, BONFANTE, ELENA, GIACOMETTI, FEDERICA, SERRAINO, ANDREA, Merialdi G., Bardasi L., Stancampiano L., Taddei R., Delogu M., Di Francesco A, Guarniero I., Grilli E., Fustini M., Bonfante E., Giacometti F., and Serraino A
- Subjects
E. coli O157 ,LATTE CRUDO - Abstract
Lo scopo della ricerca è stato quello di valutare, tramite uno studio longitudinale, le modifiche temporali nella eliminazione fecale di E. coli O157:H7 in un allevamento di bovine da latte che commercializza latte crudo per il consumo umano diretto. Lo studio è stato effettuato tra ottobre 2012 e settembre 2013 in una tipica stalle di medie dimensioni. L’allevamento era costituito da circa 140 animali (70 capi adulti e 70 giovani). Ventisei animali di ciascuno dei due gruppi (adulti e giovani) sono stati scelti casualmente e sono stati effettuati da ciascun animale 6 campionamenti di feci a distanza di 2 mesi l’uno dall’altro (in totale 284). A ogni campionamento sono stati effettuati, per ciascun gruppo, 3 campioni di acqua (in totale 36) dagli abbeveratoi e 2 campioni di mangime dalla greppia (in totale 24). I campioni sono stati analizzati tramite real time PCT (RTPCR) ed esame colturale. In totale 16 (5,6%) campioni di feci sono risultati positivi tramite RT-PCR e 9 tramite esame colturale. In tutti gli isolati è stata dimostrata la presenza dei geni stx1, stx 2 e eae. Un campione di mangime è risultato positivo tramite RT-PCR; nessun campione di acqua è risultato positivo. L’elaborazione dei dati ha evidenziato in generale una riduzione del numero di campioni positivi nel corso dello studio e una relazione tra la prevalenza dei campioni positivi e la temperatura media ambientale. I risultati dello studio dimostrano che, in una tipica azionda di bovini da latte Italiana, l’eliminazione fecale di E. coli O157:H7 segue il medesimo andamento osservato in altre situazioni; l’aumento della eliminazione fecale nel periodo estivo ha un impatto significativo sulla contaminazione ambientale e e sulla sicurezza dei prodotti alimentari in particolare il latte venduto e consumato crudo
- Published
- 2014
39. Quantitative risk assessment of Mycobacterium avium subsp. paratuberculosis survival in pasteurized milk in three dairy plants in Italy. Food Control. In press
- Author
-
SERRAINO, ANDREA, OSTANELLO, FABIO, MARCHETTI, GIACOMO, BONFANTE, ELENA, GIACOMETTI, FEDERICA, Bonilauri P., Arrigoni N., Ricchi M., ALBONETTI, SABRINA, Serraino A., Bonilauri P., Arrigoni N., Ostanello F., Ricchi M., Marchetti G., Bonfante E., Albonetti S., and Giacometti. F.
- Subjects
fluids and secretions ,food and beverages ,pasteurized milk ,risk assessment ,Mycobacterium avium subsp. paratuberculosi - Abstract
The objective of this study was to carry out a quantitative risk assessment (QRA) of Mycobacterium avium subsp. paratuberculosis (MAP) survival in pasteurized milk produced by industrial dairy plants. Data were collected in three dairy plants (A, B and C) located in three different Italian regions and processing 38.75 (plant A), 89.29 (plant B) and 190.56 million litres (Plant C) of milk yearly. Plants A and plant C produce pasteurized milk, soft and hard industrial cheeses and yogurt; plant B produces only pasteurized milk. In-line milk filter (ILMF) samples and/or bulk milk samples were collected from all 569 herds delivering milk to the three dairy plants. Samples were analyzed by quantitative real-time PCR (qPCR). The QRA considered the presence of MAP in ILMF and in bulk milk of all the dairy herds delivering milk to the three investigated dairy plants, estimating MAP concentration in raw milk on the basis of these data, the dilution effect due to mixing milk in collecting trucks and in plant silos, and the effect of pasteurization in reducing the MAP load. The expected fraction of litres of pasteurized milk with 0 MAP would be 99.02%, 99.45% and 99.12%, in plants A, B and C respectively, and an overall percentage 0.55 % to 0.98% of pasteurized milk having a MAP contamination > 0 colony forming units (CFU)/l and 0.04% – 0.11% of pasteurized litres with a MAP contamination > 100 CFU/l was predicted. A daily variation was observed in the proportion of MAP-contaminated litres of milk. The study demonstrated that milk in the dairy plants investigated may be a source of MAP exposure for humans. The between-herd and within-herd MAP apparent prevalence in the investigated areas are likely comparable to those in other areas in Italy, Europe and North America, and the results are applicable to other geographical areas.
- Published
- 2014
40. Screening for Mycobacterium avium subsp. paratuberculosis in Southern Italian dairy herds by bulk milk elisa and in line milk filters PCR
- Author
-
Arrigoni N., Ricchi M., Bonilauri P., OSTANELLO, FABIO, BONFANTE, ELENA, GIACOMETTI, FEDERICA, SERRAINO, ANDREA, Arrigoni Norma, Arrigoni N., Ostanello F., Ricchi M., Bonilauri P., Bonfante E., Giacometti F., and Serraino A.
- Subjects
milk ,PARATUBERCULOSIS - Published
- 2014
41. A screening sampling plan to detect Mycobacterium avium subspecies paratuberculosis-positive dairy herds
- Author
-
Norma Arrigoni, Fabio Ostanello, Giacomo Marchetti, Andrea Serraino, Paolo Bonilauri, Federica Giacometti, Elena Bonfante, Matteo Ricchi, Serraino A., Arrigoni N., Ostanello F., Ricchi M., Marchetti G., Bonilauri P., Bonfante E., and Giacometti F.
- Subjects
Veterinary medicine ,screening sampling plan ,dairy farm ,animal diseases ,paratuberculosi ,Paratuberculosis ,specificity ,Cattle Diseases ,Enzyme-Linked Immunosorbent Assay ,Food Contamination ,Polymerase Chain Reaction ,Sensitivity and Specificity ,Animal science ,Genetics ,medicine ,Prevalence ,Bulk tank ,Animals ,Dairy cattle ,Bacterial disease ,biology ,Dairy herds ,Incidence (epidemiology) ,fungi ,food and beverages ,biology.organism_classification ,medicine.disease ,sensitivity ,Mycobacterium avium subspecies paratuberculosis ,Mycobacterium avium subsp. paratuberculosis ,Milk ,Italy ,Herd ,Food Microbiology ,Animal Science and Zoology ,Cattle ,Filtration ,Food Science - Abstract
Mycobacterium avium ssp. paratuberculosis (MAP) is the etiological agent of paratuberculosis, a chronic contagious bacterial disease primarily affecting dairy cattle. Paratuberculosis represents a dual problem for the milk production chain: in addition to economic losses to affected herds, MAP may have zoonotic potential. Infected herds must be identified in order to implement programs designed to reduce the incidence of disease within and between herds and to prevent MAP from entering the food chain. The objective of this study was to evaluate the sensitivity and specificity of a screening sampling plan (SSP) to detect MAP-positive dairy herds by repetitive analysis of bulk tank milk (BTM) samples by ELISA and in-line milk filter (ILMF) samples by PCR. Samples from BTM and ILMF were collected twice from 569 dairy herds in southern Italy. Additionally, 12,016 individual milk samples were collected: 9,509 from 102 SSP-positive herds (SSP MAP-positive) and 2,507 from 21 randomly selected SSP-negative herds (SSP MAP-negative). There was a total of 126 SSP MAP-positive herds (i.e., 21.3% SSP MAP-positive herds; 95% confidence interval=18.0–24.9); the within-herd apparent prevalence (AP) ranged between 0.00 and 22.73% (mean 6.07%). A significant difference in within-herd AP was shown between SSP MAP-positive herds and SSP MAP-negative herds. A highly significant association was shown between the median AP herd status (>5%) and positivity to at least one ILMF or BTM sample. The SSP detected a minimum of 56.25% of low AP herds (AP ≤2.0%) up to a maximum of 100% of herds with a within-herd AP ≥8.0%. Overall, the SSP detected 85.57% of herds in which at least one individual milk sample was positive by ELISA. The proposed SSP was an inexpensive and useful tool to detect MAP-positive herds with a higher risk of infection diffusion and milk contamination. Although the SSP cannot be used for MAP-free certification of herds, it could be useful to prioritize appropriate control measures aimed at reducing the prevalence of infection in dairy herds and milk contamination.
- Published
- 2013
42. A comparative analysis of national food recall systems
- Author
-
Gaetano Liuzzo, Andrea Serraino, Federica Giacometti, Elena Bonfante, Liuzzo G., Serraino A., Giacometti F., and Bonfante E.
- Subjects
Public economics ,Recall ,lcsh:TP368-456 ,business.industry ,food ,Legislation ,RAFFS ,lcsh:Food processing and manufacture ,Work (electrical) ,Audit system ,media_common.cataloged_instance ,Food recall, Food withdrawal, National food recall system ,European union ,business ,China ,Risk management ,Food Science ,Meaning (linguistics) ,media_common - Abstract
Food recall and withdrawal is a fundamental tool for risk management and different countries stated the mandatory application of a system for food; the present work is an analysis of different systems applied in different countries. The main objective of analysed systems is the consumer’s health protection through an audit system and the application of system to rapidly recall/withdraw food on the part of producers. The comparative analysis of different national systems [i.e. European Union (EU), Australia, Canada, US and China] shows differences both of the terminological and legal aspects; the words recall and withdrawal have different meaning in EU legislation than in other counties’ legislations; from a legal point of view, two main recall/withdrawal systems could be identified: a mandatory one (EU and China) and a voluntary one (USA, Canada and Australia); all the investigated systems have a co-operative approach between authority and food business operator, but different functions on their respective roles could be identified.
- Published
- 2013
43. Prevalence of Mycobacterium avium subsp. paratuberculosis in milk and dairy cattle in Southern Italy: preliminary results
- Author
-
Andrea Serraino, Giacomo Marchetti, Federica Giacometti, Matteo Ricchi, Elena Bonfante, Norma Arrigoni, Marchetti G., Ricchi M., Serraino A., Giacometti F., Bonfante E., and Arrigoni N.
- Subjects
Veterinary medicine ,lcsh:TP368-456 ,Paratuberculosis ,Biology ,medicine.disease ,biology.organism_classification ,Latte ,Mycobacterim avium paratuberculosis ,lcsh:Food processing and manufacture ,Animal science ,Mycobacterium avium subsp. paratuberculosis ,Herd ,medicine ,Bulk tank ,media_common.cataloged_instance ,Paratuberculosis, Mycobacterium avium, Dairy, Herds, Italy ,European union ,Dairy cattle ,Food Science ,media_common ,Mycobacterium - Abstract
Paratuberculosis affects all ruminants worldwide. Mycobacterium avium subsp. paratuberculosis (MAP) could have a role in human diseases like Crohn’s. Some extra European Union (EU) countries request importation of MAP-free products. Italy has not yet actualised a control programme and the diffusion of the infection is still unknown in Southern Italy. The aim of this study was to evaluate the prevalence of the infection in five regions of Southern Italy. Bulk tank milk and in-line milk filters were sampled in 780 dairy cattle herds and respectively analysed by ELISA and real time-polymerase chain reaction (PCR). One hundred and 55 out of 780 herds (19.9%) were found positive by ELISA and/or real time PCR. Individual milk samples were then collected from all the producing animals of positive herds and from a selection of negative herds. The estimated prevalence varies from region to region between 2.8 and 5.5%. Our results indicate that the disease is widespread in the five regions. The observed prevalence could be underestimated.
- Published
- 2013
44. Microbiological characteristics of beef sausages [Caratteristiche microbiologiche di salumi prodotti con carne bovina]
- Author
-
Bonfante, Elena, federica giacometti, Merialdi, G., Bardasi, L., SABRINA ALBONETTI, Andrea Serraino, Bonfante E., Giacometti F., Merialdi G., Bardasi L., Albonetti S., and Serraino A.
- Subjects
Microbial characteristic ,food and beverages ,Sausage ,Beef - Abstract
Several studies are available on microbiological characteristics of fresh meat and on pork sausages; on the contrary few studies on sausages made with meat of other species were published in literature. The objective of this study was to report an investigation on the microbiological characteristics of sausages made by beef meat. The sausages considered in the study were: salami, salted and dried beef (bresaola), smoked beef meat, bologna, and beef bacon. Sausages were bought at retail Emilia Romagna Region and analyzed for the determination of aerobic plate count, count of Enterobacteriaceae, lactic acid bacteria, Brochothrix thermosphacta and Pseudomonas spp.; sample were also investigated for the presence of Salmonella spp. and Listeria monocytogenes; pH and aw were also determined. .At all the microbiological results show that sausage are made by productive processes able to limit contaminations by Enterobacteriaceae and pathogenic micro-organisms. The detection of L. monocytogenes in one salami sample show a criticality in the process of this product, but the limited count of L. monocytogenes and the pH e aw values detected do not allow conclusive considerations on the conformity of the investigated salami. In non fermented seasoned sausages (bresaola and smoked beef meat) the more represented spoilage microbial populations are lactic acid bacteria; on the contrary in bologna and beef bacon B. thermosphacta is more represented
45. Vascular Pathologic Conditions in and around the Spinal Cord.
- Author
-
McCarty J, Chung C, Samant R, Sitton C, Bonfante E, Chen PR, Raz E, Shapiro M, Riascos R, and Gavito-Higuera J
- Subjects
- Humans, Diagnosis, Differential, Magnetic Resonance Imaging methods, Spinal Cord Neoplasms diagnostic imaging, Spinal Cord Diseases diagnostic imaging, Vascular Diseases diagnostic imaging, Spinal Cord diagnostic imaging, Spinal Cord blood supply
- Abstract
Diagnosing and differentiating spinal vascular pathologic conditions is challenging. Small structures, lengthy imaging examinations, and overlapping imaging features increase the difficulty. Yet, subtle findings and helpful protocols can narrow the differential diagnosis. The authors aim to help radiologists make accurate and timely diagnoses of spinal vascular pathologic conditions in and around the spinal cord by highlighting spinal vascular anatomy, imaging findings, and three broad categories of abnormalities: infarcts, anomalies, and tumors.
© RSNA, 2024.- Published
- 2024
- Full Text
- View/download PDF
46. Effect of calcination on minimally processed recycled zirconia powder derived from milling waste.
- Author
-
Strazzi-Sahyon HB, Campos TMB, Dos Santos C, Piza MMT, Alves LMM, Benalcazar Jalkh EB, Bergamo ETP, Tebcherani SM, Witek L, Coelho PG, Yamaguchi S, and Bonfante EA
- Subjects
- Yttrium chemistry, Hardness, Surface Properties, Spectrometry, X-Ray Emission, Computer-Aided Design, Dental Materials chemistry, Zirconium chemistry, Recycling, Materials Testing, Microscopy, Electron, Scanning, Powders, X-Ray Diffraction, Flexural Strength
- Abstract
Objective: To assess the influence of calcination process on the properties of minimally processed recycled 3Y-TZP, and to compare it with its commercial counterpart., Methods: Non-milled 3Y-TZP waste was collected, fragmented and ball-milled to a granulometric < 5 µm. Half of the recycled powder was calcined at 900 °C. Recycled 3Y-TZP disks were uniaxially pressed and sintered to create two recycled groups: 1) Calcined and 2) Non-calcined to be compared with a commercial CAD/CAM milled 3Y-TZP. The microstructure of experimental groups was assessed through density (n = 6), scanning electron microscopy (n = 3) and energy-dispersive X-ray spectroscopy (n = 3); and the crystalline content was evaluated through X-ray diffraction (XRD) (n = 3). Optical and mechanical properties were investigated through reflectance tests (n = 10), and Vickers hardness, fracture toughness (n = 5), and biaxial flexural strength tests (n = 16), respectively. Fractographic analysis was performed to identify fracture origin and crack propagation. Statistical analyses were performed through ANOVA followed by Tukey´s test, and by Weibull statistics., Results: Particle size distribution of recycled powder revealed an average diameter of ∼1.60 µm. The relative density of all experimental groups was > 98.15 % and XRD analysis exhibited a predominance of tetragonal-phase in both recycled groups, which were similar to the crystallographic pattern of the control group. Cross-section micrographs presented flaws on the non-calcined group, and a more homogeneous microstructure for the calcined and commercial groups. Commercial samples showed lower contrast-ratio and higher translucency-parameter than the recycled groups, where non-calcined presented higher translucency-parameter and lower contrast-ratio than its calcined counterpart. The commercial group presented higher fracture toughness and characteristic strength than the recycled groups. Moreover, the calcined group exhibited higher hardness, characteristic strength, and probability of survival at higher loads than the non-calcined group. Fractographic analysis depicted the presence of microstructural flaws in the non-calcined group, which may have acted as stress-raisers and led to failures at lower flexural strengths values., Significance: The calcination process improved the microstructure, optical, and mechanical properties of the recycled 3Y-TZP., (Copyright © 2024 Elsevier Inc. All rights reserved.)
- Published
- 2024
- Full Text
- View/download PDF
47. The effect of nano hydroxyapatite coating implant surfaces on gene expression and osseointegration.
- Author
-
Kasai H, Bergamo ET, Balderrama ÍD, Imamura K, Witek L, Jalkh EB, Bonfante EA, Inoue K, Coelho PG, and Yamano S
- Subjects
- Animals, Rats, Male, Rats, Wistar, Osseointegration drug effects, Durapatite pharmacology, Surface Properties, Dental Implants, Coated Materials, Biocompatible chemistry, Gene Expression drug effects
- Abstract
Background: Hierarchical micro-nano structured topography along with surface chemistry modifications of dental implants have been suggested to positively contribute to the osseointegration process. However, the effect of such surface modifications on the molecular response as well as bone formation rate and quality are still unclear, especially in the early healing period. This study aimed to evaluate the effect of coating a double acid etched (DAE) implant surface with nano-sized (20 nm) hydroxyapatite (Nano) with respect to gene expression, histologic parameters, and nanomechanical properties when compared to DAE control at 1 and 2 weeks after implant placement in a rodent femur model., Material and Methods: Expression of bone-related genes was determined by qRT-PCR (Col-I, Runx-2, Osx, Opn, Ocn, Alp). Histomorphometric evaluation of bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) within implant threads was performed using photomicrographs after histologic processing. Mechanical properties, reduced elastic modulus and hardness, were determined through nanoindentation., Results: At 1 week, the nano group demonstrated significantly higher expression of Col-I and Ocn compared to the DAE group, indicating upregulation of osteoprogenitor and osteoblast differentiation genes. At 2 weeks, Nano surface further exhibited enhanced gene expression of Col-I and Osx in comparison to the DAE surface, suggesting an increased mineralization of the newly formed bone. Nanoindentation analysis revealed that the Nano group presented no significant difference on the ranks of reduced elastic modulus and hardness compared to DAE for both timepoints. Histomorphometric analysis yielded no significant difference in the percentage of BIC and BAFO between the Nano and DAE surfaces at 1 and 2 weeks. However, Nano implants did present a higher mean value, ~50%, of BIC compared to DAE, ~30%, after 2 weeks in vivo., Conclusions: While no significant differences were observed in the amount and mechanical properties of newly formed bone, Nano surface positively and significantly increased the expression osteogenic genes compared to DAE surface at early healing periods.
- Published
- 2024
- Full Text
- View/download PDF
48. Recurrent Nontraumatic Subgaleal Hematomas in a Pediatric Patient With Sickle Cell Disease.
- Author
-
Sheikh IN, Okeleji O, Afzal R, Bonfante E, Kodakandla M, and Menon NM
- Subjects
- Adolescent, Humans, Disease Progression, P-Selectin, Anemia, Sickle Cell complications, Hematoma, Epidural, Cranial complications, Ischemic Stroke complications
- Abstract
Spontaneous subgaleal hematoma in pediatric patients with sickle cell disease (SCD) is a rare occurrence that can present with symptoms mimicking ischemic stroke, a known complication of SCD. However, unlike ischemic stroke, subgaleal hematoma is nonlethal and can be managed conservatively without major sequelae. Here, we present the case of an adolescent with SCD who presented with 2 episodes of subgaleal and epidural hematomas, 2 years apart. The latter episode occurred while on crizanlizumab, an anti-P-selectin antibody, approved for use in SCD in 2019 to reduce the number of acute pain crises. We demonstrate the diagnosis of subgaleal hematoma and outline steps to conservative management which were safe and did not lead to focal neurologic deficits., Competing Interests: The authors declare no conflict of interest., (Copyright © 2024 Wolters Kluwer Health, Inc. All rights reserved.)
- Published
- 2024
- Full Text
- View/download PDF
49. Progressive vascular tumor in infant: A case report and literature review of PIK3CA vascular malformation.
- Author
-
Medina A, Zima L, Atkinson A, Menon NM, Bhattacharjee M, Bonfante E, Sandberg DI, Greives MR, and Shah M
- Subjects
- Humans, Child, Infant, Female, Mutation, Class I Phosphatidylinositol 3-Kinases genetics, Vascular Neoplasms, Vascular Malformations diagnosis, Vascular Malformations genetics, Vascular Malformations pathology
- Abstract
Purpose: Vascular anomalies are classified as either vascular tumors or vascular malformations. Vascular malformations can be difficult to diagnose and treat in the pediatric population and can masquerade as malignant processes. Understanding the genetics behind vascular malformations can lead to identification of specific mutations which can be treated with targeted immunotherapy., Methods: Our case presents a pediatric patient with progressively enlarging vascular malformation despite multiple surgical resections and systemic medical treatments who underwent genetic evaluation and was found to have PIK3CA mutation., Results: After identification of PIK3CA mutation, our patient was successfully treated with the p110ɑ-specific inhibitor, alpelisib, with both shrinkage of malformation on follow-up imaging as well as gains in her developmental milestones., Conclusion: Progressive vascular malformations in the pediatric population can be hard to diagnose and treat and are thought to arise from somatic mutations. Our case highlights a patient with progressive malformation despite multiple surgical resections who was successfully treated with targeted immunotherapy after proper identification of genetic mutation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)
- Published
- 2024
- Full Text
- View/download PDF
50. A comparative study of mechanical properties of yttria stabilized zirconia monolithic and bilayer configuration for dental application.
- Author
-
Pereira RM, Moreira Bastos Campos T, Augusto Bonfante E, and Patrocínio Thim G
- Subjects
- Materials Testing, Zirconium chemistry, Yttrium chemistry, Surface Properties, Dental Materials, Ceramics chemistry, Flexural Strength
- Abstract
Zirconia multilayer presents promising prospects, but there is scarce information about its microstructural and mechanical characterization. Therefore, this study sought to produce them in-house and to perform their characterization by comprising four groups of specimens to assess the biaxial flexural strength, microhardness, fracture toughness, phase characterization and quantification, fractography, and microstructural features. Weibull analysis was performed to determine the Weibull modulus and characteristic strength. The results showed that bilayers 3YSZ and 5YSZ presented intermediate mechanical properties when compared to 3YSZ and 5YSZ monolithic controls (680 MPa, 464 MPa, 885 MPa, 594 MPa, respectively). Fractographic analysis revealed that the failure origin was not at the interface in the bilayer groups, but residual stress was present between the layers. Hardness and fracture toughness were not affected by the interface., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)
- Published
- 2023
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.