Search

Recent advances have revived interest in the concept of osteocyte perilacunar/canalicular remodeling (PLR) and have motivated efforts to identify the mechanisms regulating this process in bone in the context of normal physiology and pathological conditions. Here, we describe several methods that are evaluating morphological changes associated with PLR function of osteocytes.

We assessed the combined impacts of human demineralized bone matrix (hDBM) scaffold, adipose-derived stem cells (hADS), and photobiomodulation (PBM) on bone repair of a critical size femoral defect (CSFD) in 72 rats. The rats were divided into six groups: control (group 1); ADS (group 2 - ADS transplanted into hDBM); PBM (group 3 - PBM-treated CSFDs); ADS + PBM in vivo (group 4 - ADS transplanted into hDBM and the CSFDs were treated with PBM in vivo); ADS + PBM in vitro (group 5 - ADS were treated with PBM in vitro, then seeded into hDBM); and ADS + PBM in vitro+in vivo (group 6 - PBM-treated ADS were seeded into hDBM, and the CSFDs were treated with PBM in vivo. At the anabolic phase (2 weeks after surgery), bone strength parameters of the groups 5, 6, and 4 were statistically greater than the control, ADS, and PBM in vivo groups (all, p = 0.000). Computed tomography (CT) scans during the catabolic phase (6 weeks after surgery) of bone healing revealed that the Hounsfield unit (HU) of CSFD in the groups 2 (p = 0.000) and 5 (p = 0.019) groups were statistically greater than the control group. The groups 5, 4, and 6 had significantly increased bone strength parameters compared with the PBM in vivo, control, and ADS groups (all, p = 0.000). The group 5 was statistically better than the groups 4, and 6 (both, p = 0.000). In vitro preconditioned of hADS with PBM significantly increased bone repair in a rat model of CSFD in vivo., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Extracellular matrices (ECMs) derived from native tissues/organs have been used as biomaterials for tissue engineering and regenerative medicine in a wide range of preclinical and clinical settings. The success or failure of these applications is largely contingent on the host responses to the matrices in vivo. Despite retaining their native structural and functional proteins, bone ECM-based transplants have been reported to evoke adverse immune responses in many cases; thus, optimizing the immunomodulatory properties of bone ECMs is critical for ensuring downstream regenerative outcomes. Using a simple digestion-neutralization protocol, we transformed the commonly used bone-derived filler particles into gel bioscaffolds. Instead of inducing macrophages toward proinflammatory (M1) polarization, as reported in the literature and confirmed in the present study for ECM particles, the ECM gels were found to be more likely to polarize macrophages toward regulatory/anti-inflammatory (M2) phenotypes, leading to enhanced tissue regeneration in a rat periodontal defect model. The present work demonstrates a simple, practical and economical strategy to modify the immunomodulatory properties of bone ECMs before their in vivo transplantation and hence has important implications that may facilitate the use of ECM-based bioscaffolds derived from diverse sources of tissues for regenerative purposes., (Copyright © 2019. Published by Elsevier B.V.)

Purpose of Review: Osteocytes are the most abundant bone cells. They are completely encased in mineralized tissue, sitting inside lacunae that are connected by a multitude of canaliculi. In recent years, the osteocyte network has been shown to fulfill endocrine functions and to communicate with a number of other organs. This review addresses emerging knowledge on the connectome of the lacunocanalicular network in different types of bone tissue., Recent Findings: Recent advances in three-dimensional imaging technology started to reveal parameters that are well known from general theory to characterize the function of networks, such as network density, degree of nodes, or shortest path length through the network. The connectome of the lacunocanalicular network differs in some aspects between lamellar and woven bone and seems to change with age. More research is needed to relate network structure to function, such as intercellular transport or communication and its role in mechanosensation, as well as to understand the effect of diseases.

Purpose of Review: In perilacunar/canalicular remodeling (PLR), osteocytes dynamically resorb, and then replace, the organic and mineral components of the pericellular extracellular matrix. Given the enormous surface area of the osteocyte lacuna-canalicular network (LCN), PLR is important for maintaining homeostasis of the skeleton. The goal of this review is to examine the motivations and critical considerations for the analysis of PLR, in both in vitro and in vivo systems., Recent Findings: Morphological approaches alone are insufficient to elucidate the complex mechanisms regulating PLR in the healthy skeleton and in disease. Understanding the role and regulation of PLR will require the incorporation of standardized PLR outcomes as a routine part of skeletal phenotyping, as well as the development of improved molecular and cellular outcomes. Current PLR outcomes assess PLR enzyme expression, the LCN, and bone matrix composition and organization, among others. Here, we discuss current PLR outcomes and how they have been applied to study PLR induction and suppression in vitro and in vivo. Given the role of PLR in skeletal health and disease, integrated analysis of PLR has potential to elucidate new mechanisms by which osteocytes participate in skeletal health and disease.

Due to the similar collagen composition and closely physiological relationship with soft connective tissues, demineralized bone matrices (DBMs) were used to repair the injured tendon or ligament. However, the osteoinductivity of DBMs would be a huge barrier of these applications. Hydrogen peroxide (H 2 O 2 ) has been proved to reduce the osteoinductivity of DBMs. Nevertheless, the biological properties of H 2 O 2 -treated DBMs have not been evaluated completely, while the potential mechanism of H 2 O 2 compromising osteoinductivity is also unclear. Hence, the purpose of this study was to characterize the biological properties of H 2 O 2 -treated DBMs and search for the proof that H 2 O 2 could compromise osteoinductivity of DBMs. Decellularized and demineralized bone matrices (DCDBMs) were washed by 3% H 2 O 2 for 12 h to fabricate the H 2 O 2 -treated DCDBMs (HPTBMs). Similar biological properties including collagen, biomechanics, and biocompatibility were observed between DCDBMs and HPTBMs. The immunohistochemistry staining of bone morphogenetic protein 2 (BMP-2) was negative in HPTBMs. Furthermore, HPTBMs exhibited significantly reduced osteoinductivity both in vitro and in vivo. Taken together, these findings suggest that the BMP-2 in DCDBMs could be the target of H 2 O 2 . HPTBMs could be expected to be used as a promising scaffold for tissue engineering. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019., (© 2019 Wiley Periodicals, Inc.)

With ageing and various diseases, the vascular pore volume fraction (porosity) in cortical bone increases, and the morphology of the pore network is altered. Cortical bone elasticity is known to decrease with increasing porosity, but the effect of the microstructure is largely unknown, while it has been thoroughly studied for trabecular bone. Also, popular micromechanical models have disregarded several micro-architectural features, idealizing pores as cylinders aligned with the axis of the diaphysis. The aim of this paper is to quantify the relative effects on cortical bone anisotropic elasticity of porosity and other descriptors of the pore network micro-architecture associated with pore number, size and shape. The five stiffness constants of bone assumed to be a transversely isotropic material were measured with resonant ultrasound spectroscopy in 55 specimens from the femoral diaphysis of 29 donors. The pore network, imaged with synchrotron radiation X-ray micro-computed tomography, was used to derive the pore descriptors and to build a homogenization model using the fast Fourier transform (FFT) method. The model was calibrated using experimental elasticity. A detailed analysis of the computed effective elasticity revealed in particular that porosity explains most of the variations of the five stiffness constants and that the effects of other micro-architectural features are small compared to usual experimental errors. We also have evidence that modelling the pore network as an ensemble of cylinders yields biased elasticity values compared to predictions based on the real micro-architecture. The FFT homogenization method is shown to be particularly efficient to model cortical bone.

Mandibular defects, caused by congenital, pathological or iatrogenic insults, can significantly affect patient quality of life. The reconstruction of mandible has recently gained the interest of clinical and tissue engineering researchers. The purpose of this study was to evaluate the effectiveness of three-dimensional (3-D) cultured autologous grafts prepared using bone marrow-derived mesenchymal stem cells (BMSCs) combined with demineralized bone matrix (DBM) scaffolds for the restoration of mandibular defects. Cylindrical defects were created in the mandibular body of minipigs and filled with 3D-cultured BMSCs/DBM autografts, 2D-cultured BMSCs/DBM autografts, DBM material (without cells), or were left unfilled (blank). Using computed tomographic (CT) imaging and histological staining, we found that treatment of mandibular defects using 3-D cultured BMSCs/DBM autografts offered improvements in bone formation over both 2-D cultured autografts and cell-free DBM scaffolds. We found increased osteoid formation in 3D and 2D cultures, with more osteogenic cells present in the 3D constructs. We suggest that 3-D cultured homograft BMSCs combined with DBM scaffolds represents a new strategy for bone reconstruction, with potential future clinical applicability.

Background: Gene-activated matrix (GAM) induces sustained local production of growth factors to promote tissue regeneration. GAM contains a plasmid DNA (pDNA) encoding target proteins that is physically entrapped within a biodegradable matrix carrier. GAM with a pDNA encoding the first 34 amino acids of parathyroid hormone (PTH 1-34) and a collagen matrix enhances bone regeneration in long bone defects. Demineralized freeze-dried bone allograft (DFDBA) is a widely used osteoinductive bone graft. The present study determined the osteogenic effects of PTH-GAM with a collagen or DFDBA/collagen composite (D/C) matrix for treating craniofacial bone defects., Methods: We constructed a pDNA encoding human PTH 1-34 and performed cyclic AMP ELISA to verify the bioactivity of PTH 1-34. Next, we generated a D/C matrix and PTH-GAMs containing a collagen matrix (PTH-C-GAM) or D/C matrix (PTH-D/C-GAM). Rats with critical-sized calvarial bone defects were divided into four groups, namely, untreated rats (sham group) and rats grafted with D/C matrix, PTH-C-GAM, or PTH-D/C-GAM (D/C, PTH-C-GAM, or PTH-D/C-GAM groups, respectively). PTH expression was determined by performing immunohistochemical staining after 4 and 8 weeks. New bone formation was evaluated by performing radiography, dual-energy X-ray absorptiometry, microcomputed tomography, and histological examination., Results: PTH pDNA-transfected cells secreted bioactive PTH 1-34. Moreover, PTH was expressed at 4 and 8 weeks after the surgery in rats in the PTH-C-GAM group but not in rats in the D/C group. New bone formation in the calvarial bone defects, from more to less, was in the order of PTH-D/C-GAM, PTH-C-GAM, D/C, and sham groups., Conclusion: Our results indicate that PTH-GAM with a collagen matrix promotes local PTH production for at least 8 weeks and bone regeneration in craniofacial bone defect. Moreover, our results indicate that replacement of the collagen matrix with the D/C matrix improves the osteogenic effects of PTH-GAM., (Copyright © 2018. Published by Elsevier Taiwan LLC.)

Demineralized bone matrix (DBM), as an extracellular matrix (ECM), has had limited use as a medical replacement although studies have reported a possibility for its use in tendon or ligament tissue engineering. To be an acid-extracted organic matrix, DBM contains much of bone protein, with a small amount of inorganic solids and some cell debris. However, cell debris is a critical factor that triggers inflammatory reaction in clinical reconstructions using ECM. In this study, we used a protocol incorporating the use of detergent with nuclease treatment to prepare decellularized DBM (DCDBM). DNA quantification analysis and histological observation confirmed that cells were completely removed from DBM. The inherent ultrastructure of DBM was well preserved after decellularization as observed through scanning electron microscopy. Additionally, calcium and phosphorus were absent and the specific functional groups of collagen remained after decellularization. Moreover, 79.71% of the tensile strength of DBM was retained and the viscoelastic properties were similar to the ligament. Furthermore, DCDBM promoted the adhesion and proliferation of NIH-3T3 fibroblasts in vitro and triggered less inflammation response at 12 weeks subcutaneous implantation in a rat model. These results demonstrate that the DCDBM has the potential to be used for tendon and ligament replacement. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 468-478, 2018., (© 2017 Wiley Periodicals, Inc.)

Decellularized bone matrix is gaining a lot of attention as implantable biomaterials and/or biological scaffolds for bone tissue repair, and shows good clinical performance. This chapter describes the processing techniques and characterization protocols of decellularized bone. For the applications of the decellularized bone scaffold in promoting bone repair and regeneration, we discuss some of the current advances, and highlight the advantages and disadvantages of these scaffolds. Fabrication and application of the hydrogel derived from decellularized bone for bone tissue engineering are also presented.

Osteocytes-the central regulators of bone remodeling-are enclosed in a network of microcavities (lacunae) and nanocanals (canaliculi) pervading the mineralized bone. In a hitherto obscure process related to aging and disease, local plugs in the lacuno-canalicular network disrupt cellular communication and impede bone homeostasis. By utilizing a suite of high-resolution imaging and physics-based techniques, it is shown here that the local plugs develop by accumulation and fusion of calcified nanospherites in lacunae and canaliculi (micropetrosis). Two distinctive nanospherites phenotypes are found to originate from different osteocytic elements. A substantial deviation in the spherites' composition in comparison to mineralized bone further suggests a mineralization process unlike regular bone mineralization. Clearly, mineralization of osteocyte lacunae qualifies as a strong marker for degrading bone material quality in skeletal aging. The understanding of micropetrosis may guide future therapeutics toward preserving osteocyte viability to maintain mechanical competence and fracture resistance of bone in elderly individuals., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The formation of the complex osteocytic network relies on the emission of long cellular processes involved in communication, mechanical strain sensing, and bone turnover control. Newly deposited osteocytic processes rapidly become trapped within the calcifying matrix, and, therefore, they must adopt their definitive conformation and contact their targets in a single morphogenetic event. However, the cellular mechanisms ensuring the robustness of this unique mode of morphogenesis remain unknown. To address this issue, we examined the developing calvaria of the amphibian Xenopus tropicalis by confocal, two-photon, and super-resolution imaging, and described flattened osteocytes lying within a woven bone structured in lamellae of randomly oriented collagen fibers. While most cells emit peripheral and perpendicular processes, we report two osteocytes morphotypes, located at different depth within the bone matrix and exhibiting distinct number and orientation of perpendicular cell processes. We show that this pattern is conserved with the chick Gallus gallus and suggest that the cellular microenvironment, and more particularly cell-cell contact, plays a fundamental role in the induction and stabilization of osteocytic processes. We propose that this intrinsic property might have been evolutionarily selected for its ability to robustly generate self-organizing osteocytic networks harbored by the wide variety of bone shapes and architectures found in extant and extinct vertebrates., (© 2016 Wiley Periodicals, Inc.)

Several decades ago, aluminum encephalopathy associated with osteomalacia has been recognized as the major complication of chronic renal failure in dialyzed patients. Removal of aluminum from the dialysate has led to a disappearance of the disease. However, aluminum deposit occurs in the hydroxyapatite of the bone matrix in some clinical circumstances that are presented in this review. We have encountered aluminum in bone in patients with an increased intestinal permeability (coeliac disease), or in the case of prolonged administration of aluminum anti-acid drugs. A colocalisation of aluminum with iron was also noted in cases of hemochromatosis and sickle cell anemia. Aluminium was also identified in a series of patients with exostosis, a frequent benign bone tumor. Corrosion of prosthetic implants composed of grade V titanium (TA6V is an alloy containing 6% aluminum and 4% vanadium) was also observed in a series of hip or knee revisions. Aluminum can be identified in undecalcified bone matrix stained by solochrome azurine, a highly specific stain allowing the detection of 0.03 atomic %. Colocalization of aluminum and iron does not seem to be the fruit of chance but the cellular and molecular mechanisms are still poorly understood. Histochemistry is superior to spectroscopic analyses (EDS and WDS in scanning electron microscopy)., (Copyright © 2015 Elsevier Masson SAS. All rights reserved.)

Purpose: To investigate the effects of locally applied simvastatin plus biphasic calcium phosphate (BoneCeramic(r)) or collagen sponge on bone formation in critical-sized bone defects., Methods: Thirty defects of 5mm in diameter were created bilaterally with a trephine bur in the calvariae of fifteen Wistar rats. The defects were divided into five groups: group 1 - control, no treatment; group 2 (BoneCeramic(r)); group 3 (BoneCeramic(r) + 0.1mg simvastatin); group 4 (collagen sponge); and group 5 (collagen sponge + 0.1mg simvastatin). After eight weeks the animals were euthanized and their calvariae were histologically processed. Hematoxylin and eosin-stained sections were subjected to histological and histomorphometrical analyses. The area of newly formed bone was calculated and compared between groups., Results: The greater amount of a bone-like tissue was formed around the carrier in group 3 (BoneCeramic(r) + 0.1mg simvastatin) followed by group 2 (BoneCeramic(r)), and almost no bone was formed in the other groups. Group 3 was significantly different compared to group 2, and both groups were significantly different compared to the other groups., Conclusion: Simvastatin combined with BoneCeramic(r) induced significantly greater amounts of newly formed bone and has great potential for the healing of bone defects.

The potential of increasing bone mass and preventing fractures in osteoporosis using stem cell therapy is currently an area of intense focus. However, there are very little data available regarding the postfracture bony defect healing efficacy under osteoporotic conditions. This study aims to investigate whether critical-sized segmental bone defects in a rabbit model of osteoporosis could be repaired using an allogenic stem cell-based tissue engineering (TE) approach and to investigate the potential influence of osteoporosis on the treatment efficacy. Rabbit fetal bone marrow mesenchymal stem cells (BMSCs) were harvested and expanded in vitro. Decalcified bone matrix (DBM) scaffolds were then seeded with allogenic fetal BMSCs and cultivated in osteogenic media to engineer BMSC/DBM constructs. Critical-sized radial defects were created in ovariectomized (OVX) rabbits and the defects were repaired either by insertion of BMSC/DBM constructs or by DBM scaffolds alone. Also, nonovariectomized age-matched (non-OVX) rabbits were served as control. At 3 months post-treatment under the osteoporotic condition (OVX rabbits), the BMSC/DBM constructs inserted within the defect generated significantly more bone tissue when compared to the DBM scaffold as demonstrated by the X-ray, microcomputed tomography, and histological analyses. In addition, when compared to a normal nonosteoporotic condition (age-matched non-OVX rabbits), the defect treatment efficacy was adversely affected by the osteoporotic condition with significantly less bone regeneration. This study demonstrated the potential of allogenic fetal BMSC-based TE strategy for repairing bone defects in an osteoporotic condition. However, the treatment efficacy could be considerably compromised in the OVX animals. Therefore, a more sophisticated strategy that addresses the complicated pathogenic conditions associated with osteoporosis is needed.

Purpose: Peripheral blood (PB) admixture should be minimized during numerical and functional, as well as cytokinetic analysis of bone marrow (BM) aspirates for research purposes. Therefore, purity assessment of the BM aspirate should be performed in advance. We investigated whether bone matrix vesicle (BMV)-bound bone alkaline phosphatase (ALP) could serve as a marker for the purity of BM aspirates., Results: Total ALP activity was significantly higher in BM serum (97 (176-124)U/L, median (range)) compared to PB serum (63 (52-73)U/L, p < 0.001). Agarose gel electrophoresis showed a unique bone ALP fraction in BM, which was absent in PB. Native polyacrylamide gel electrophoresis revealed the high molecular weight of this fraction, corresponding with membrane-bound ALP from bone matrix vesicles (BMV), as evidenced by electron microscopy. A serial PB admixture experiment of bone cylinder supernatant samples, rich in BMV-bound ALP, confirmed the sensitivity of this proposed quality assessment method. Furthermore, a BMV ALP fraction of ≥ 15% is suggested as cut-off value for minimal BM quality. Moreover, the BM purity declines rapidly with larger aspirated BM volumes., Conclusion: The exclusive presence of BMV-bound ALP in BM could serve as a novel marker to assess purity of BM aspirates., (Copyright © 2015. Published by Elsevier B.V.)

Objectives: To investigate whether a combination of demineralized bone matrix (DBM) and bone marrow mesenchymal stem cells (BMSCs) infected with adenovirus-mediated- bone morphogenetic protein (Ad-BMP-2) and transforming growth factor-β3 (Ad-TGF-β3) promotes the repair of the full-thickness cartilage lesions in pig model., Methods: BMSCs isolated from pig were cultured and infected with Ad-BMP-2(B group), Ad-TGF-β3 (T group), Ad-BMP-2 + Ad-TGF-β3(BT group), cells infected with empty Ad served as a negative group(N group), the expression of the BMP-2 and TGF-β3 were confirmed by immunofluorescence, PCR, and ELISA, the expression of SOX-9, type II collagen(COL-2A), aggrecan (ACAN) in each group were evaluated by real-time PCR at 1w, 2w, 3w, respectively. The chondrogenic differentiation of BMSCs was evaluated by type II collagen at 21d with immunohistochemical staining. The third-passage BMSCs infected with Ad-BMP-2 and Ad-TGF-β3 were suspended and cultured with DBM for 6 days to construct a new type of tissue engineering scaffold to repair full-thickness cartilage lesions in the femur condyles of pig knee, the regenerated tissue was evaluated at 1,2 and 3 months after surgery by gross appearance, H&E, safranin O staining and O'driscoll score., Results: Ad-BMP-2 and Ad-TGF-β3 (BT group) infected cells acquired strong type II collagen staining compared with Ad-BMP-2 (B group) and Ad-TGF-β3 (T group) along. The Ad-BMP-2 and Ad-TGF-β3 infected BMSCs adhered and propagated well in DBM and the new type of tissue engineering scaffold produced hyaline cartilage morphology containing a stronger type II collagen and safranin O staining, the O'driscoll score was higher than other groups., Conclusions: The DBM compound with Ad-BMP-2 and Ad-TGF-β3 infected BMSCs scaffold has a good biocompatibility and could well induce cartilage regeneration to repair the defects of joint cartilage. This technology may be efficiently employed for cartilage lesions repair in vivo.

The aim of the study was to reveal the mastication forces effect on the microstructure of mandible bone tissue of mini-pigs by Fouirier harmonic imaging analysis of bone sections images of back scattered electrons and assessment of calcium and phosphorous distribution maps obtained by roentgenofluorescence technique. The results showed that by higher functional loads not only the total content of mineral elements in the bone matrix increased but also the of the low-frequency harmonics in the image spectrum indicating structural heterogeneity decrease in bone mineralization.

Objective: To observe the histological structure and cytocompatibility of novel acellular bone matrix (ACBM) and to investigate the feasibility as a scaffold for bone tissue engineering., Methods: Cancellous bone columns were harvested from the density region of 18-24 months old male canine femoral head, then were dealt with high-pressure water washing, degreasing, and decellularization with Trixon X-100 and sodium deoxycholate to prepare the ACBM scaffold. The scaffolds were observed by scanning electron microscope (SEM); HE staining, Hoechst 33258 staining, and sirius red staining were used for histological analysis. Bone marrow mesenchymal stem cells (BMSCs) from canine were isolated and cultured with density gradient centrifugation; the 3rd passage BMSCs were seeded onto the scaffold. MTT test was done to assess the cytotoxicity of the scaffolds. The proliferation and differentiation of the cells on the scaffold were observed by inverted microscope, SEM, and live/dead cell staining method., Results: HE staining and Hoechst 33258 staining showed that there was no cell fragments in the scaffolds; sirius red staining showed that the ACBM scaffold was stained crimson or red and yellow alternating. SEM observation revealed a three dimensional interconnected porous structure, which was the microstructure of normal cancellous bone. Cytotoxicity testing with MTT revealed no significant difference in absorbance (A) values between different extracts (25%, 50%, and 100%) and H-DMEM culture media (P > 0.05), indicating no cytotoxic effect of the scaffold on BMSCs. Inverted microscope, SEM, and histological analysis showed that three dimensional interconnected porous structure of the scaffold supported the proliferation and attachment of BMSCs, which secreted abundant extracellular matrices. Live/dead cell staining results of cell-scaffold composites revealed that the cells displaying green fluorescence were observed., Conclusion: Novel ACBM scaffold can be used as an alternative cell-carrier for bone tissue engineering because of thoroughly decellularization, good mircostructure, non-toxicity, and good cytocompatibility.

Background: Tissue-engineering approach can result in significant bone regeneration. We aimed to reconstruct the segmental orbital rim defects with antigen-free bovine cancellous bone (BCB) scaffolds combined with bone marrow mesenchymal stem cells (BMSCs) in rats., Methods: BCB was prepared by degreasing, deproteinization and partly decalcification. BMSCs isolated from green fluorescent protein (GFP) transgenic rats were osteogenically induced and seeded onto BCB scaffolds to construct induced BMSCs/BCB composites. An 8-mm full-thickness defect on the rat inferior-orbit rim was established. Induced BMSCs/BCB composites cultured for 5 days were implanted into the orbital defects as the experimental group. Noninduced BMSCs/BCB group, BCB group and exclusive group were set. General condition, spiral CT, 3D orbital reconstruction, histological and histomorphometric analysis were performed after implantation., Results: BCB presented reticular porous structure. GFP-BMSCs adhering to BCB appeared bright green fluorescence and grew vigorously. Infection and graft dislocation were not observed. In induced BMSCs/BCB group, CT and 3D reconstruction showed perfect orbital repair situation. Histological analysis indicated BCB was mostly biodegraded; newly formed bone and complete synostosis were observed. The percentage of newly formed bone was (57.12 ± 6.28) %. In contrast, more residual BCB, less newly formed bone and nonunion were observed in the noninduced BMSCs/BCB group. Slowly absorbed BCB enwrapped by fibrous connective tissue and a small amount of new bone occurred in BCB group. Fibrous connective tissue appeared in exclusive group., Conclusions: Antigen-free bovine cancellous bone that retains natural bone porous structure and moderate mechanical strength with elimination of antigen is the ideal carrier for mesenchymal stem cells in vitro. BCB combined with BMSCs is a promising composite for tissue engineering, and can effectively reconstruct the orbit rim defects in rats.

Bone graft substitutes have become an essential component in a number of orthopedic applications. Autologous bone has long been the gold standard for bone void fillers. However, the limited supply and morbidity associated with using autologous graft material has led to the development of many different bone graft substitutes. Allogeneic demineralized bone matrix (DBM) has been used extensively to supplement autograft bone because of its inherent osteoconductive and osteoinductive properties. Synthetic and natural bone graft substitutes that do not contain growth factors are considered to be osteoconductive only. Bioactive glass has been shown to facilitate graft containment at the operative site as well as activate cellular osteogenesis. In the present study, we present the results of a comprehensive in vitro and in vivo characterization of a combination of allogeneic human bone and bioactive glass bone void filler, NanoFUSE(®) DBM. NanoFUSE(®) DBM is shown to be biocompatible in a number of different assays and has been cleared by the FDA for use in bone filling indications. Data are presented showing the ability of the material to support cell attachment and proliferation on the material thereby demonstrating the osteoconductive nature of the material. NanoFUSE(®) DBM was also shown to be osteoinductive in the mouse thigh muscle model. These data demonstrate that the DBM and bioactive glass combination, NanoFUSE(®) DBM, could be an effective bone graft substitute.

Unlabelled: Different filling materials have been used in an attempt to repair bone loss situations., Objective: The present study aimed to examine the effect of a bone matrix in post - extraction remodelling of the alveolar bone, and to perform a histomorphometric analysis of the residual alveolar ridges in Wistar rats., Material and Methods: Both rat first lower molars were extracted and the right alveoli were filled with particles of a bone matrix with mineral components (MO - UNC) (experimental group, EG). The left alveoli were used as a control group (CG). The animals were sacrificed at 0 hr., 15, 30 and 60 days after extraction, and the samples were processed. Histological sections were made at the level of the mesial alveolus of the first lower molar. Repair of the alveoli was histologically evaluated and a histomorphometric study of total alveolar volume (TAV), height of the buccal plate (Bh), height of the lingual plate (Lh) and percentage of osseointegration (OI) of the particles was performed to compare the residual ridges of CG with those of the EG. Statistical analysis of the data was performed., Results: In the cases of the experimental group, newly - formed bone tissue was identified around the MO - UNC particles (osseointegration). Histomorphometric data indicate that, at 60 days post - extraction, TAV was significantly greater for EG when compared with CG (p <0.05) and the percentage of osseointegration of the particles increased as a function of time (57.6 %, 90.5% y 95.5%, for EG at 15, 30 y 60 days respectively)., Conclusions: The bone matrix (MO - UNC) evaluated in this study is an osteoconductive material that prevents the collapse of post - extraction alveolar bone.

Among persisting questions on bone calcification, a major one is the link between protein expression and mineral deposition. A cell culture system is here proposed opening new integrative studies on biomineralization, improving our knowledge on the role played by non-collagenous proteins in bone. This experimental in vitro model consisted in human primary osteoblasts cultured for 60 days at the surface of a 3D collagen scaffold mimicking an osteoid matrix. Various techniques were used to analyze the results at the cellular and molecular level (adhesion and viability tests, histology and electron microscopy, RT- and qPCR) and to characterize the mineral phase (histological staining, EDX, ATG, SAED and RMN). On long term cultures human bone cells seeded on the osteoid-like matrix displayed a clear osteoblast phenotype as revealed by the osteoblast-like morphology, expression of specific protein such as alkaline phosphatase and expression of eight genes classically considered as osteoblast markers, including BGLAP, COL1A1, and BMP2. Von Kossa and alizarine red allowed us to identify divalent calcium ions at the surface of the matrix, EDX revealed the correct Ca/P ratio, and SAED showed the apatite crystal diffraction pattern. In addition RMN led to the conclusion that contaminant phases were absent and that the hydration state of the mineral was similar to fresh bone. A temporal correlation was established between quantified gene expression of DMP1 and IBSP, and the presence of hydroxyapatite, confirming the contribution of these proteins to the mineralization process. In parallel a difference was observed in the expression pattern of SPP1 and BGLAP, which questioned their attributed role in the literature. The present model opens new experimental possibilities to study spatio-temporal relations between bone cells, dense collagen scaffolds, NCPs and hydroxyapatite mineral deposition. It also emphasizes the importance of high collagen density environment in bone cell physiology.

Toughening in hierarchically structured materials like bone arises from the arrangement of constituent material elements and their interactions. Unlike microcracking, which entails micrometer-level separation, there is no known evidence of fracture at the level of bone's nanostructure. Here, we show that the initiation of fracture occurs in bone at the nanometer scale by dilatational bands. Through fatigue and indentation tests and laser confocal, scanning electron, and atomic force microscopies on human and bovine bone specimens, we established that dilatational bands of the order of 100 nm form as ellipsoidal voids in between fused mineral aggregates and two adjacent proteins, osteocalcin (OC) and osteopontin (OPN). Laser microdissection and ELISA of bone microdamage support our claim that OC and OPN colocalize with dilatational bands. Fracture tests on bones from OC and/or OPN knockout mice (OC(-/-), OPN(-/-), OC-OPN(-/-;-/-)) confirm that these two proteins regulate dilatational band formation and bone matrix toughness. On the basis of these observations, we propose molecular deformation and fracture mechanics models, illustrating the role of OC and OPN in dilatational band formation, and predict that the nanometer scale of tissue organization, associated with dilatational bands, affects fracture at higher scales and determines fracture toughness of bone.

Osteocytes play a pivotal role in the regulation of skeletal mass. Osteocyte processes are thought to sense the flow of interstitial fluid that is driven through the osteocyte canaliculi by mechanical stimuli placed upon bone, but how this flow elicits a cellular response is virtually unknown. Modern theoretical models assume that osteocyte canaliculi contain ultrastructural features that amplify the fluid flow-derived mechanical signal. Unfortunately the calcified bone matrix has considerably hampered studies on the osteocyte process within its canaliculus. Using one of the few ultra high voltage electron microscopes (UHVEM) available worldwide, we applied UHVEM tomography at 2 MeV to reconstruct unique three-dimensional images of osteocyte canaliculi in 1 μm sections of human bone. A realistic three-dimensional image-based model of a single canaliculus was constructed, and the fluid dynamics of a Newtonian fluid flow within the canaliculus was analyzed. We created virtual 2.2 nm thick sections through a canaliculus and found that traditional TEM techniques create a false impression that osteocyte processes are directly attached to the canalicular wall. The canalicular wall had a highly irregular surface and contained protruding axisymmetric structures similar in size and shape to collagen fibrils. We also found that the microscopic surface roughness of the canalicular wall strongly influenced the fluid flow profiles, whereby highly inhomogeneous flow patterns emerged. These inhomogeneous flow patterns may induce deformation of cytoskeletal elements in the osteocyte process, thereby amplifying mechanical signals. Based on these observations, new and realistic models can be developed that will significantly enhance our understanding of the process of mechanotransduction in bone.

Bone is a complex material with a hierarchical multi-scale organization from the molecule to the organ scale. The genetic bone disease, osteogenesis imperfecta, is primarily caused by mutations in the collagen type I genes, resulting in bone fragility. Because the basis of the disease is molecular with ramifications at the whole bone level, it provides a platform for investigating the relationship between structure, composition, and mechanics throughout the hierarchy. Prior studies have individually shown that OI leads to: 1. increased bone mineralization, 2. decreased elastic modulus, and 3. smaller apatite crystal size. However, these have not been studied together and the mechanism for how mineral structure influences tissue mechanics has not been identified. This lack of understanding inhibits the development of more accurate models and therapies. To address this research gap, we used a mouse model of the disease (oim) to measure these outcomes together in order to propose an underlying mechanism for the changes in properties. Our main finding was that despite increased mineralization, oim bones have lower stiffness that may result from the poorly organized mineral matrix with significantly smaller, highly packed and disoriented apatite crystals. Using a composite framework, we interpret the lower oim bone matrix elasticity observed as the result of a change in the aspect ratio of apatite crystals and a disruption of the crystal connectivity., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Demineralized bone matrix (DBM) powder is widely used for bone regeneration due to its osteoinductivity and osteoconductivity. However, difficulties with handling, its tendency to migrate from graft sites, and lack of stability after surgery can sometimes limit the clinical utility of this material. In this work, the possibility of using a thermogelling chitosan carrier to deliver DBM powder was assessed. The DBM-thermogelling putty improved handling and formed a gel-like composite in situ at body temperature within a clinically relevant time period. The properties of the formed composite, including morphology, porosity, mechanical properties, equilibrium swelling as well as degradability, are significantly influenced by the ratio of DBM to thermogelling chitosan. The in vitro study showed that the alkaline phosphatase activity of C2C12 cells encapsulated in the composite was steadily increased with culture time. The in vivo study showed that increased DBM content in the DBM-thermogelling chitosan induced ectopic bone formation in a nude rat model. The diffusion of growth factor from the DBM-thermogelling chitosan as well as the host-implant interactions are discussed., (Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

We report the ultrastructure of regenerated bone surrounding two types of biomaterials: hydroxyapatite-alginate composite and sintered hydroxyapatite. Critical defects in the calvaria of Wistar rats were filled with micrometer-sized spherical biomaterials and analyzed after 90 and 120 days of implantation by high-resolution transmission electron microscopy and Fourier transform infrared attenuated total reflectance microscopy, respectively. Infrared spectroscopy showed that hydroxyapatite of both biomaterials became more disordered after implantation in the rat calvaria, indicating that the biological environment induced modifications in biomaterials structure. We observed that the regenerated bone surrounding both biomaterials had a lamellar structure with type I collagen fibers alternating in adjacent lamella with angles of approximately 90°. In each lamella, plate-like apatite crystals were aligned in the c-axis direction, although a rotation around the c-axis could be present. Bone plate-like crystal dimensions were similar in regenerated bone around biomaterials and pre-existing bone in the rat calvaria. No epitaxial growth was observed around any of the biomaterials. A distinct mineralized layer was observed between new bone and hydroxyapatite-alginate biomaterial. This region presented a particular ultrastructure with crystallites smaller than those of the bulk of the biomaterial, and was possibly formed during the synthesis of alginate-containing composite or in the biological environment after implantation. Round nanoparticles were observed in regions of newly formed bone. The findings of this work contribute to a better understanding of the role of hydroxyapatite based biomaterials in bone regeneration processes at the nanoscale., (Copyright © 2011 Elsevier Inc. All rights reserved.)

In this paper we develop a lattice-based computational model focused on bone resorption by osteoclasts in a single cortical basic multicellular unit (BMU). Our model takes into account the interaction of osteoclasts with the bone matrix, the interaction of osteoclasts with each other, the generation of osteoclasts from a growing blood vessel, and the renewal of osteoclast nuclei by cell fusion. All these features are shown to strongly influence the geometrical properties of the developing resorption cavity including its size, shape and progression rate, and are also shown to influence the distribution, resorption pattern and trajectories of individual osteoclasts within the BMU. We demonstrate that for certain parameter combinations, resorption cavity shapes can be recovered from the computational model that closely resemble resorption cavity shapes observed from microCT imaging of human cortical bone., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Cell cultures are often used to study bone mineralization; however, not all systems achieve a bone-like matrix formation. In this study, the mineralized matrix assembled in F-OST osteoblast cultures was analyzed, with the aim of establishing a novel model for bone mineralization. The ultrastructure of the cultures was investigated using scanning electron microscopy, atomic force microscopy, and transmission electron microscopy (TEM). The mineral phase was characterized using conventional and high-resolution TEM, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and solid-state (31)P and (1)H nuclear magnetic resonance. F-OST osteoblast cultures presented a clear nodular mineralization pattern. The chief features of the mineralizing nodules were globular accretions ranging from about 100 nm to 1.5 μm in diameter, loaded with needle-shaped crystallites. Accretions seemed to bud from the cell membrane, increase in size, and coalesce into larger ones. Arrays of loosely packed, randomly oriented collagen fibrils were seen along with the accretions. Mineralized fibrils were often observed, sometimes in close association with accretions. The mineral phase was characterized as a poorly crystalline hydroxyapatite. The Ca/P atomic ratio was 1.49 ± 0.06. The presence of OH was evident. The lattice parameters were a = 9.435 Å and c = 6.860 Å. The average crystallite size was 20 nm long and 10 nm wide. Carbonate substitutions were seen in phosphate and OH sites. Water was also found within the apatitic core. In conclusion, F-OST osteoblast cultures produce a bone-like matrix and may provide a good model for bone mineralization studies.

Currently, the main hurdle in the tissue engineering field is how to provide sufficient blood supply to grafted tissue substitutes in the early post-transplanted period. For three-dimensional, cell-dense, thick tissues to survive after transplantation, treatments are required for hypoxia, nutrient insufficiency, and the accumulation of waste products. In this study, a biomacromolecular layer-by-layer coating process of chitosan/heparin onto a decellularized extracellular bone matrix was designed to accelerate the blood perfusion and re-endothelialization process. The results of in vitro measurements of the activated partial thromboplastin time supported the theory that the combination of chitosan and heparin could bring both anticoagulation and hemocompatibility to the scaffold. A rabbit bone defect model was established for further evaluation of the application of this kind of surface-modified scaffold in vivo. The final results of computed tomography (CT) perfusion imaging and histological examination proved that this facile coating approach could significantly promote blood perfusion and re-endothelialization in the early post-transplanted period compared with an acellular bone matrix due to its much-improved anticoagulation property., (© Mary Ann Liebert, Inc.)

Matrix vesicles (MVs) are cell-derived membranous entities crucial for mineral formation in the extracellular matrix. One of the dominant groups of constitutive proteins present in MVs, recognised as regulators of mineralization in norm and pathology, are annexins. In this report, besides the annexins already described (AnxA2 and AnxA6), we identified AnxA1 and AnxA7, but not AnxA4, to become selectively enriched in MVs of Saos-2 cells upon stimulation for mineralization. Among them, AnxA6 was found to be almost EGTA-non extractable from matrix vesicles. Moreover, our report provides the first evidence of annexin-binding S100 proteins to be present in MVs of mineralizing cells. We observed that S100A10 and S100A6, but not S100A11, were selectively translocated to the MVs of Saos-2 cells upon mineralization. This observation provides the rationale for more detailed studies on the role of annexin-S100 interactions in MV-mediated mineralization., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Objectives: The aim of this study was to ultrastructurally examine the influence of simvastatin on bone healing in surgically created defects in rat mandibles., Study Design: Bone defects 0.8 mm in diameter were created in the buccal aspect of first mandibular molar roots and filled with 2.5% simvastatin gel, while the controls were allowed to heal spontaneously. The rats were humanely killed 7, 9, 11, or 14 days postoperatively, and the specimens were processed for scanning and transmission electron microscopy, as well as for colloidal gold immunolabeling of osteopontin., Results: The regenerated alveolar bone in the simvastatin-treated defects presented smaller marrow spaces, and the collagen fibrils were regularly packed exhibiting a lamellar bone aspect. Osteopontin was present through the bone matrix during the wound healing and alveolar bone regeneration., Conclusion: The present study provides evidence that a single topical application of 2.5% simvastatin gel improves the quality of the new bone and decreases bone resorption., (Copyright © 2011 Mosby, Inc. All rights reserved.)

Differentiated osteoblasts are polarized in regions of bone deposition, demonstrate extensive cell interaction and communication, and are responsible for bone formation and quality. Type XII collagen is a fibril-associated collagen with interrupted triple helices and has been implicated in the osteoblast response to mechanical forces. Type XII collagen is expressed by osteoblasts and localizes to areas of bone formation. A transgenic mouse null for type XII collagen exhibits skeletal abnormalities including shorter, more slender long bones with decreased mechanical strength as well as altered vertebrae structure compared with wild-type mice. Col12a(-/-) osteoblasts have decreased bone matrix deposition with delayed maturation indicated by decreased bone matrix protein expression. Compared with controls, Col12a(-/-) osteoblasts are disorganized and less polarized with disrupted cell-cell interactions, decreased connexin43 expression, and impaired gap junction function. The data demonstrate important regulatory roles for type XII collagen in osteoblast differentiation and bone matrix formation.

Cortical bone is a multiscale composite material. Its elastic properties are anisotropic and heterogeneous across its cross-section, due to endosteal bone resorption which might affect bone strength. The aim of this paper was to describe a homogenization method leading to the estimation of the variation of the elastic coefficients across the bone cross-section and along the bone longitudinal axis. The method uses the spatial variations of bone porosity and of the degree of mineralization of the bone matrix (DMB) obtained from the analysis of 3-D synchrotron micro-computed tomography images. For all three scales considered (the foam (100 nm), the ultrastructure (5 microm) and the mesoscale (500 microm)), the elastic coefficients were determined using the Eshelby's inclusion problem. DMB values were used at the scale of the foam. Collagen was introduced at the scale of the ultrastructure and bone porosity was introduced at the mesoscale. The pores were considered as parallel cylinders oriented along the bone axis. Each elastic coefficient was computed for different regions of interest, allowing an estimation of its variations across the bone cross-section and along the bone longitudinal axis. The method was applied to a human femoral neck bone specimen, which is a site of osteoporotic fracture. The computed elastic coefficients for cortical bone were in good agreement with experimental results, but some discrepancies were obtained in the endosteal part (trabecular bone). These results highlight the importance of accounting for the heterogeneity of cortical bone properties across bone cross-section and along bone longitudinal axis., (2010 Elsevier Ltd. All rights reserved.)

Initiation of mineralization during endochondral ossification is a multistep process and has been assumed to correlate with specific interactions of annexins A5 and A6 and collagens. However, skeletal development appears to be normal in mice deficient for either A5 or A6, and the highly conserved structures led to the assumption that A5 and A6 may fulfill redundant functions. We have now generated mice deficient of both proteins. These mice were viable and fertile and showed no obvious abnormalities. Assessment of skeletal elements using histologic, ultrastructural, and peripheral quantitative computed tomographic methods revealed that mineralization and development of the skeleton were not significantly affected in mutant mice. Otherwise, global gene expression analysis showed subtle changes at the transcriptome level of genes involved in cell growth and intermediate metabolism. These results indicate that annexins A5 and A6 may not represent the essential annexins that promote mineralization in vivo., (2010 American Society for Bone and Mineral Research)

In the process of bone resorption, calcium is considered to be transported within vesicles in osteoclasts and eventually released. We studied the ultramicromorphology of calcium (Ca) transport in osteoclasts by preparing samples of osteoclasts collected from rat femurs in which calcium was maximally preserved and subjected them to high-pressure quick-freezing and freeze-substitution. We then examined the localization of calcium by Electron Energy Loss Spectroscopy (EELS). The structures of cell membranes were preserved, suggesting the suitability of this high-pressure quick-freezing and freeze-substitution technique. Osteoclast mitochondria adjacent to the ruffled border were rich in mitochondrial granules and contained a large amount of Ca. In contrast, mitochondria in the basolateral region contained few granules. Moreover, by an osteoclast-culturing experiment, differences in the morphology of mitochondrial granules were noted between culturing on a dentin slice and that on a gold plate, i.e., few mitochondrial granules were noted in osteoclasts cultured on a non-dentin plate. These findings suggest an association between the morphology of mitochondrial granules in osteoclasts and bone resorption as well as a new transport route for Ca resorbed by osteoclasts. We propose that Ca accumulates in mitochondria granules to prevent increased Ca concentration in cytoplasm of osteoclasts during bone resorption.

Inflammatory diseases, such as rheumatoid arthritis (RA), influence the bone remodelling process and increase the risk of fracture. Bone can be viewed as a composite material comprising of two phases: the organic phase, constituted predominantly by collagen type I, and the mineral phase, composed primarily by calcium phosphate, in the form of mineral crystals. The mineral component confers bone with strength and stiffness while the organic phase is responsible for bone toughness and ductility and acts as a scaffold for the mineralisation process. The efficacy of bone as a structural material depends on the balance between these different bone components and their biomechanical properties. The main determinants of mechanical properties of bone are the amount of mineral, the collagen content, the orientation of the collagen fibers and minerals and the accumulation of microcracks in the bone matrix. In a mice model of arthritis mechanical testing has shown that arthritic femurs have a significantly lower Young's modulus, yield stress and work until ultimate stress. This evidence suggests that one of the major explanations for the increased fracture risk in RA is related to the changes on bone components induced by inflammation that result in compromised biomechanical properties.

In order for osteocytes to perceive mechanical information and regulate bone remodeling accordingly they must be anchored to their extracellular matrix (ECM). To date the nature of this attachment is not understood. Osteocytes are embedded in mineralized bone matrix, but maintain a pericellular space (50-80 nm) to facilitate fluid flow and transport of metabolites. This provides a spatial limit for their attachment to bone matrix. Integrins are cell adhesion proteins that may play a role in osteocyte attachment. However, integrin attachments require proximity between the ECM, cell membrane, and cytoskeleton, which conflicts with the osteocytes requirement for a pericellular fluid space. In this study, we hypothesize that the challenge for osteocytes to attach to surrounding bone matrix, while also maintaining fluid-filled pericellular space, requires different "engineering" solutions than in other tissues that are not similarly constrained. Using novel rapid fixation techniques, to improve cell membrane and matrix protein preservation, and transmission electron microscopy, the attachment of osteocyte processes to their canalicular boundaries are quantified. We report that the canalicular wall is wave-like with periodic conical protrusions extending into the pericellular space. By immunohistochemistry we identify that the integrin alphavbeta3 may play a role in attachment at these complexes; a punctate pattern of staining of beta3 along the canalicular wall was consistent with observations of periodic protrusions extending into the pericellular space. We propose that during osteocyte attachment the pericellular space is periodically interrupted by underlying collagen fibrils that attach directly to the cell process membrane via integrin-attachments., ((c) 2009 Wiley-Liss, Inc.)

Bone tissue-derived biomaterials have often been applied for bone repair because of their similarity to human bone in structure and composition. When combined with growth factors, they could accelerate bone formation. Here, we explore a collagen containing mineralized bone-derived matrix (CCMBM) from bovine bone tissues, which not only maintains proper mechanical strength but also binds to the collagen-binding recombinant human collagen-binding bone morphogenetic protein-2 (CBD-BMP(2)). By analyzing its morphology and composition, we found that CCMBM was porous and mainly composed of calcium compounds. CCMBM could provide mechanical support for bone injury repair. It also showed good biocompatibility and proper degradation rate that would be helpful for bone regeneration. In addition, the intentionally preserved collagen allowed the specific binding of CBD-BMP(2) to CCMBM, and resulted in significantly increased osteogenesis in vivo. The results indicated that the combination of CCMBM with collagen-binding BMP(2) could be emerged into an effective medical device for bone repair., ((c) 2008 Wiley Periodicals, Inc.)

The aim of this study was to explore further the preservation of tissues and the mineral distribution in 1.6 million-year-old fossil hominin material from Koobi Fora, Kenya attributed to Paranthropus boisei (KNM-ER 1817). Bone, dentine and cementum microstructure were well preserved. Electron microprobe analysis of dentine and bone revealed an F-bearing apatite. Calcite now filled the original soft tissue spaces. The average Ca/P atomic ratio was 1.93, as compared to 1.67 in biological hydroxyapatite, indicating that the Ca-content had increased during fossilization. Analytical sums for mineral content were approximately 90 wt%. Some of the remaining 10 wt% may be preserved organic material. Demineralized dentine fragments showed irregularly distributed tubules encircled with a fibrous-like electron-dense material. A similar material was observed in demineralized dentine. Within this, structures resembling bacteria were seen. In demineralized bone an electron-dense material with a fibrous appearance and a banding pattern that repeated every 64 nm, similar to that of collagen, was noted. SEM of an enamel fragment (KNM-ER 6081) showed signs of demineralization/remineralization. Retzius lines, Hunter-Schreger bands and prism cross-striations spaced 3.7-7.1.microm apart were noted. Prisms were arranged in a pattern 3 configuration and deeper areas containing aprismatic enamel were occasionally observed. We conclude that a great deal of informative microstructure and ultrastructure remains preserved in this fossil material. We also hypothesize that the high mineral content of the tissues may 'protect' parts of the organic matrix from degradation, since our findings indicate that some organic matrix may still be present., (Copyright (c) 2009 S. Karger AG, Basel.)

The response of cells in the distraction gap during mandibular distraction osteogenesis was recorded by transmission electronic microscopy. We distracted the mandible on both sides in eight adult goats. Two animals were killed at 8, 16, 32, and 48 days, respectively, after activation of the device. The specimens were harvested and processed for histological and ultrastructural examination. The results showed that the cells and newly-formed extracellular matrix (ECM) were aligned with the tension vector. In the early stage of distraction osteogenesis, cells in the distraction gap were of the active proliferative phenotype. They then differentiated into fibroblast-like cells and osteoblasts, showing ultrastructural characteristics of the active synthetic and secretory phenotypes. Newly-formed collagen, bone canaliculi, and mineralisation of the ECM were clearly evident during distraction osteogenesis. Our results show that at the ultrastructural level cell proliferation is activated by tension and stress during the early stages, and synthetic and secretory function stimulated during the later stages of mandibular distraction osteogenesis.

Tissue-nonspecific alkaline phosphatase (TNSALP) and Ca-ATPase are known to play roles in bone mineralization, but how these enzymes contribute to appositional mineralization has been illusive. Here we examined the active sites of these enzymes in appositional mineralization using the bones of young rats being administered with 1-hydroxyethylidene-1,1-bisphosphonate (HEBP) for 5 days. The doses of HEBP totally abolished mineralization of newly formed bone matrix except in matrix vesicles (MVs), and hence allowed precise localization of MVs and phosphatase reactions within non-mineralized extracellular matrix. Intense TNSALP and ATPase reactions were confirmed along the limited portions of osteoblast membranes where intimate cell-cell contacts were maintained. Diffuse reactions of these enzymes were throughout the osteoid implicating efflux of TNSALP and ATPase molecules into extracellular matrix from the osteoblast membranes. Phosphatase reactions associated with MVs varied both in intensity and location among the individual vesicles; newly formed MVs were almost free of reactions but appeared to gain those activities later in the osteoid. These data suggest that TNSALP and ATPase are released from the osteoblast membrane and later integrated into MVs within the osteoid. The osteoblasts may thus regulate appositional mineralization of bone from a distance at least in part by providing phosphatases via MVs.

Allogenous demineralized bone matrix (DBM) represents a potential scaffold for bone tissue engineering due to its close relation in structure and function with autologous bone, but its supply is often restricted by donor availability. Thus, an expanded source of human bone is needed. The aim of this study was to evaluate the capacity of partially DBM scaffolds derived from allogenous cancellous bone of osteoporotic femurs to support osteogenesis of human bone marrow stromal cells (BMSCs) in vitro and in vivo in order to assess their potential use in bone tissue-engineering strategies. Human BMSCs of passage 2 were seeded either on osteoporotic bone-derived DBM scaffolds or on normal bone-derived scaffolds and cultured in osteogenic medium for 14 days. To assess the in vitro proliferation potential and osteogenic differentiation of BMSCs on scaffolds, scanning electronic microscopy observation, DNA content assays, and measurements of alkaline phosphatase activity and osteocalcin content were applied; the results displayed no significant differences between the osteoporotic DBM group and the normal DBM group. After 2 weeks of subculture in vitro, the BMSC/DBM composites were subcutaneously implanted into athymic mice for 8 weeks to evaluate their in vivo bone-forming ability. Histological examination showed tissue-engineered bone formation in the DBM pores in both groups, and no significant differences were observed in either the extent or frequency of new bone formation between these two groups. Based on these results, it can be concluded that osteoporotic bone-derived DBM may serve as a promising scaffold for bone tissue engineering.

The morphology of the osteocyte changes during the cell's lifetime. Shortly after becoming buried in the matrix, an osteocyte is plump with a rich rough endoplasmic reticulum and a well-developed Golgi complex. This "immature" osteocyte reduces its number of organelles to become a "mature" osteocyte when it comes to reside deeper in the bone matrix. We hypothesized that mineralization of the surrounding matrix is the trigger for osteocyte maturation. To verify this, we prevented mineralization of newly formed matrix by administration of 1-hydroxyethylidene-1,1-bisphosphonate (HEBP) and then examined the morphological changes in the osteocytes in rats. In the HEBP group, matrix mineralization was disturbed, but matrix formation was not affected. The osteocytes found in the unmineralized matrix were immature. Mature osteocytes were seen in the corresponding mineralized matrix in the control group. The immature osteocytes in the unmineralized matrix failed to show immunoreactivity with anti-sclerostin antibody, whereas mature osteocytes in the mineralized matrix showed immunoreactivity in both control and HEBP groups. These findings suggest that mineralization of the matrix surrounding the osteocyte is the trigger for cytodifferentiation from a plump immature form to a mature osteocyte. The osteocyte appears to start secreting sclerostin only after it matures in the mineralized bone matrix.

Demineralized bone matrix (DBM) is a collagen-based scaffold, but its low mechanical strength and limited BMP-2 binding ability restrict its application in bone repair. It is known that heparin could be immobilized onto scaffolds to enhance their binding of growth factors with the heparin-binding domain. Here, we crosslinked heparin to DBM to increase its BMP-2 binding ability. To our surprise, the mechanical strength of DBM was also dramatically increased. The compression modulus of heparin crosslinked DBM (HC-DBM) have improved (seven-fold increased) under wet condition, which would allow the scaffolds to keep specific shapes in vivo. As expected, HC-DBM showed specific binding ability to BMP-2. Additional studies showed the bound BMP-2 exerted its function to induce cell differentiation on the scaffold. Subcutaneous implantation of HC-DBM carrying BMP-2 showed higher alkaline phosphatase (ALP) activity (2 weeks), more calcium deposition (4 and 8 weeks) and more bone formation than that of control groups. It is concluded that HC-DBM has increased mechanical intensity as well as specific BMP-2 binding ability; HC-DBM/BMP-2 enhances the osteogenesis and therefore could be an effective medical device for bone repair.

Matrix vesicles (MVs) are extracellular organelles that initiate mineral formation, accumulating inorganic phosphate (P(i)) and calcium leading to the formation of hydroxyapatite (HA) crystals, the main mineral component of bones. MVs are produced during bone formation, as well as during the endochondral calcification of cartilage. MVs are released into the extracellular matrix from osseous cells such as osteoblasts and hypertrophic chondrocytes. In this report, using 1-D SDS-PAGE, in-gel tryptic digestion and an LC-MS-MS/MS protein identification protocol, we characterized the proteome of MVs isolated from chicken embryo (Gallus gallus) bones and cartilage. We identified 126 gene products, including proteins related to the extracellular matrix and ion transport, as well as enzymes, cytoskeletal, and regulatory proteins. Among the proteins recognized for the first time in MVs were aquaporin 1, annexin A1 (AnxA1), AnxA11, glycoprotein HT7, G(i) protein alpha2, and scavenger receptor type B. The pathways for targeting the identified proteins into MVs and their particular functions in the biomineralization process are discussed. Obtaining a knowledge of the functions and roles of these proteins during embryonic mineralization is a prerequisite for the overall understanding of the initial mineral formation mechanisms.

Although recent studies indicate that regional dura mater influences the fate of the overlying cranial suture, little is known about the assembly of extracellular matrix (ECM) molecules within the patent and fusing murine cranial suture complexes. Confocal laser scanning microscopy was used to study ECM assembly within patent and fusing cranial suture complexes. Coronal sections (20 microm thick) of patent sagittal (SAG) and fusing posterior frontal (PF) sutures from postnatal 8-, 14-, and 18-day-old Sprague-Dawley rats were scanned in 0.5-microm increments, and images were collected consecutively to create a z-series for three-dimensional reconstruction. Spatial and temporal collagen arrangements were compared between SAG and PF sutures by measuring interfiber distance, fiber thickness, and total collagen surface area at each time point. We demonstrate that on day 8 (before the onset of suture fusion), collagen bundles are randomly arranged in both the SAG and PF sutures. By day 14 (midfusion period), there was a statistically significant reduction in total collagen surface area (80.5% versus 67.4%; P < 0.05) as the collagen bundles were organized into orthogonal lattices along the anterior and endocranial margins of the PF suture. Furthermore, new bone matrix deposition was observed along the edges of these organized collagen bundles. In contrast, collagen within the SAG suture remained randomly arranged and unossified. By day 18 (late fusion period), the PF suture was completely fused except for the posterior-ectocranial portion. This patent section of the PF suture contained a highly organized mineralizing orthogonal collagen lattice. The total collagen surface area in the day-18 PF suture continued to decline compared with the day-8 PF suture (80.5% versus 55.6%; P < 0.05). In the day-18 SAG suture, the collagen bundles remained randomly arranged, and the total surface area did not change. The same analysis was performed in a human pathologic fusing and patent suture. Similar results were observed. The total collagen surface area significantly decreased in the pathologic fusing human suture compared with the patent suture (92.8% versus 60.6%; P < 0.05). Moreover, the pathologically fusing suture contained a highly organized mineralizing orthogonal collagen lattice. This is the first analysis of collagen patterns in patent and fusing cranial sutures.

There are safety concerns regarding administration of bisphosphonates to children. Little is known about the effects of bisphosphonates on bone matrix organization during bone modeling. The present study examined the effects of alendronate (ALN) on bone matrices formed by intramembranous ossification in the appendicular growing skeleton. ALN was administered to 1-week-old Sprague-Dawley rats at a dose of 0, 35, or 350 microg/kg/week for 4 or 8 weeks. The position of femoral diaphysis formed exclusively by intramembranous ossification was identified, and cross sections of cortical bone at this position were analyzed. Bone mineral density (BMD) and geometric parameters were evaluated using peripheral quantitative computed tomography. The preferential orientation degree of biological apatite (BAp) crystals in the bone longitudinal direction, which shows the degree of bone matrix anisotropy, was evaluated using microbeam X-ray diffraction analysis. We analyzed bone histomorphometrical parameters and performed bone nanomechanical tests to examine the material properties of newly developing cortical bone. The preferential orientation degree of BAp crystals significantly decreased in 35 microg/kg/week ALN-treated groups compared with vehicle-treated groups, although there were no significant differences in BMD between the two groups. The periosteal mineral apposition rate significantly increased in the 35 microg/kg/week ALN-treated group. We found a high negative correlation between bone matrix anisotropy and the regional periosteal mineral apposition rate (r = -0.862, P < 0.001). Nanomechanical tests revealed that 35 microg/kg/week ALN administration caused deterioration of the material properties of the bone microstructure. These new findings suggest that alendronate affects bone matrix organization and promotes bone formation with a less anisotropic microstructure during intramembranous ossification.