Search

Copyright of Arthroskopie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: The Latarjet procedure was developed for the treatment of anterior shoulder instability in young, high-demand patients with attritional glenoid bone loss, whose risk of redislocation following primary dislocation may exceed 90%. Coracoid graft osteolysis and prominent screws are commonly observed in late computed tomography (CT) scans of patients who re-present following the procedure, but the clinical relevance of osteolysis in the overall Latarjet cohort is undetermined. We aimed to evaluate clinical and radiological outcomes in patients who underwent the Latarjet procedure, and to determine if severe coracoid graft osteolysis compromised clinical outcomes. Methods: This was a retrospective analysis of patients who underwent the open Latarjet procedure. Patients were invited via an e-questionnaire that contained a Western Ontario Shoulder Instability Index (WOSI), and queried about redislocation and reoperation since index surgery. Preoperative glenoid bone loss was calculated on CT using the best-fit circle method. Osteolysis was graded (0, screw head buried in graft; 1, screw head exposed; 2, threads exposed; 3, complete resorption/severe osteolysis) at the level of the proximal and distal screws respectively, on axial CT scans performed ≥ 12 months postoperatively. Results: Between 2011 and 2022, a single surgeon performed 442 Latarjet procedures. One hundred fifty eight patients responded to the questionnaire at median (interquartile range [IQR]) 44 (27-70) months postoperatively, among whom the median (IQR) WOSI score was 352 (142-666) points (0 = best, 2100 = worst). Recurrent anterior instability occurred in 3/158 (2%) patients. One patient required reoperation for this indication. Among patients who had CT scans ≥ 12 months postoperatively (median [IQR] 40 [29-69] months), 1 patient developed severe osteolysis around both screws (WOSI = 90), 17/62 (27%) patients developed severe osteolysis around 1 screw, all of which were proximal (median [IQR] WOSI = 235 [135-644]), and 44/62 (71%) patients did not develop severe osteolysis around either screw (median [IQR] WOSI = 487 [177-815]). There were no statistically significant differences in WOSI scores between groups based on the presence of severe osteolysis. Conclusion: The Latarjet is reliable procedure that has a low rate of redislocation and reoperation. Severe coracoid graft osteolysis occurs with time, and always affects the proximal graft first. The presence of severe osteolysis did not compromise clinical outcomes.

Background: Postoperative infection after the Latarjet procedure, ranging from 1% to 6%, can compromise the functional outcome of young athletes. Cutibacterium acnes is a main pathogen as a consequence of an intraoperative contamination. Purpose: To evaluate intraoperative contamination with C. acnes and the effectiveness of the local application of vancomycin during the Latarjet procedure. Study Design: Cohort study; Level of evidence, 2. Methods: This was a single-center study including 75 patients (mean age, 26 years; range, 15-55 years) operated on for anterior shoulder instability with the primary open Latarjet procedure; they underwent the same protocol of skin preparation and preoperative prophylactic antibiotics. Three groups of 25 patients were created and divided sequentially, without the results of each group being known before the end of the study: group A (5 mg/mL of vancomycin), group B (20 mg/mL of vancomycin), and group C (control group with no vancomycin). Swab samples of the coracoid were taken before sectioning the coracoid process (time 1) and after its preparation (time 2). The coracoid was then wrapped in gauze impregnated with different concentrations of vancomycin, except for group C. A final sample (time 3) was taken before screwing the bone block onto the glenoid. All samples were cultured for 21 days, and patients underwent clinical and radiological follow-up for 6 months. Results: The C. acnes contamination rates at times 1, 2, and 3 were 25%, 44%, and 45%, respectively, without significant difference. There was no significant difference between groups A and B with respect to the number of positive cultures at each time point. Of 9 positive cultures at time 1, all were still positive at time 3 in group A, whereas 3 of 5 were negative in group B (P =.027). The rate of C. acnes at time 3 in the control group was higher than that in the 2 other groups (68% vs 44% for group A and 20% for group B; P =.003). Body mass index was the only prognostic factor for a C. acnes –positive culture (26.05 ± 3.39 vs 23.34 ± 2.33; P =.018). No clinical infection was reported at the 6-month postoperative follow-up. Conclusion: The rate of C. acnes contamination ranged from 25% to 68% during the open Latarjet procedure in young athletes. Vancomycin reduced the bacterial contamination when it was used at high concentrations in a gauze wrap on the coracoid. The type of C. acnes detected and its clinical implications remain to be studied. [ABSTRACT FROM AUTHOR]

Background: Several arthroscopic glenoid bone augmentation techniques have been introduced to treat patients affected by anterior shoulder instability associated with critical bone loss. The efficacy of the different arthroscopic bony procedures has not been compared yet. Purpose: To compare the recurrence, complication, and reoperation rates of the arthroscopic Latarjet (AL) and arthroscopic free bone block (ABB) procedures for anterior shoulder instability. Study Design: Meta-analysis and systematic review; Level of evidence, 4. Methods: A systematic search was conducted in MEDLINE/PubMed, Web of Science, and Embase to identify clinical studies reporting the outcomes of the AL and ABB procedures. The following search phrases were used: "Arthroscopic" AND "Bone Block" OR "Bone Graft," and "Arthroscopic" AND "Glenoid Augmentation" OR "Glenoid Reconstruction," and "Arthroscopic" AND "Latarjet" OR "Coracoid Graft" OR "Coracoid Transfer." Exclusion criteria were <24 months of minimum follow-up, sample size <10 cases, revision after previous glenoid bone grafting, epilepsy, and multidirectional instability. Data regarding the study design, patient characteristics, surgical technique, and outcomes were extracted and analyzed. A proportional meta-analysis was conducted to compare the complication, recurrence, and reoperation rates between the 2 groups. Multiple subgroup analyses were performed to analyze the incidence of each complication and assess the weight of different fixation methods (in the whole cohort) or different graft types (in the ABB group). The modified Coleman Methodology Score was used to assess the risk of bias. Results: Of 5010 potentially relevant studies, 18 studies regarding the AL procedure (908 cases) and 15 studies regarding the ABB procedure (469 cases) were included. The 2 groups were comparable in age (P =.07), sex (P =.14), glenoid bone loss (P =.14), number of preoperative dislocations (P =.62), proportion of primary and revision procedures (P =.95), length of follow-up (P =.81), modified Coleman Methodology Score (P =.21), and level of evidence (P =.49). There was no difference in the recurrence (P =.88), reoperation (P =.79), and complication (P =.08) rates. The subgroup analyses showed a higher rate of hardware-related complications for screw fixation compared with flexible fixation (P =.01). Conclusion: The AL and ABB procedures had similar recurrence, reoperation, and complication rates. Screw fixation of the bone graft was related to an increased risk of complications compared with flexible fixation. Registration: CRD42022368153 (PROSPERO). [ABSTRACT FROM AUTHOR]

Background: Glenoid reconstruction with a bone block for anterior glenoid bone loss (GBL) has shown excellent outcomes. However, fixation techniques that require metal implants are associated with metal-related complications and bone graft resorption. Hypothesis: Arthroscopic glenoid reconstruction using a tricortical iliac crest bone graft (ICBG) and metal-free suture tape cerclage fixation can safely and effectively restore the glenoid surface area in patients with recurrent anterior shoulder instability and anterior GBL. Study Design: Case series; Level of evidence, 4. Methods: Adult patients (≥18 years) of both sexes with recurrent anterior shoulder instability and anterior GBL ≥15% were enrolled. These patients underwent arthroscopic glenoid reconstruction with ICBGs and metal-free suture tape cerclage fixation. The effectiveness and clinical outcomes with this technique were evaluated at 24 months using functional scores. Resorption of the graft articular surface was assessed by computed tomography, with the graft surface divided into 6 square areas aligned in 2 columns. Descriptive analysis was conducted. Results: A total of 23 consecutive patients met inclusion criteria (22 male, 1 female; mean age, 30.5 ± 7.9 years). The mean preoperative GBL was 19.7% ± 3.4%, and there were 15 allograft and 8 autograft ICBGs. All patients exhibited graft union at 3 months. The median follow-up was 38.5 months (interquartile range, 24-45 months). The Western Ontario Shoulder Instability Index, Rowe, Constant-Murley, and Subjective Shoulder Value scores improved from preoperatively (35.1%, 24.8, 83.1, and 30.9, respectively) to postoperatively (84.7%, 91.1, 96.0, and 90.9, respectively) (P <.001). No differences in clinical scores were observed between the graft types. One surgical wound infection was reported, and 2 patients (8.7% [95% CI, 2.4%-26.8%]) required a reoperation. The mean overall glenoid surface area increased from 80.3% ± 3.5% to 117.0% ± 8.3% immediately after surgery before subsequently reducing to 98.7% ± 6.2% and 95.0% ± 5.7% at 12 and 24 months, respectively (P <.001). The mean graft resorption rate was 18.1% ± 7.9% in the inner column and 80.3% ± 22.4% in the outer column. Additionally, 3 patients treated with an allograft (20.0% [95% CI, 7.1%-45.2%]), including the 2 with clinical failures, exhibited complete graft resorption at the last follow-up. Conclusion: Arthroscopic glenoid reconstruction using an ICBG and metal-free suture tape cerclage fixation was safe and effective, yielding excellent clinical outcomes. Resorption of the graft articular surface predominantly affected the nonloaded areas beyond the best-fit circle perimeter. [ABSTRACT FROM AUTHOR]

Bone augmentation prior to dental implant placement is a common scenario in the dental implantology field. Among the important intraoral harvesting sites to obtain bone blocks is the ramus/retromolar region that has a high success rate and long-lasting alveolar ridge augmentation. Preserving the bone volume and quality at the donor site is crucial for preventing further complications or to serve as a site for re-harvesting. Healing of the intraoral donor sites has been described in the maxillofacial field. This study aimed to evaluate the spontaneous healing of the mandibular retromolar donor site utilizing computer-assisted quantification 6 and 12 months after bone harvesting. Materials and methods: The study was conducted on patients who underwent an alveolar ridge augmentation using an intraoral retromolar bone graft. Three CBCT scans were performed—intraoperative, and at six months and one year after the surgical procedure. By using the Materialise Mimics Innovation Suite software 26.0 features segmentation by thresholding, Hounsfield unit averaging, and superimposition of the tomographies, we could precisely quantify the healing process utilizing spatial and characteristic measures. Results: In all cases, the computer-aided quantification showed that six months following surgery, the donor site had recovered up to 64.5% ± 4.24 of its initial volume, and this recovery increased to 89.2% ± 2.6 after one year. Moreover, the Hounsfield unit averaging confirmed dynamic bone quality healing, starting at 690.3 ± 81 HU for the bone block, decreasing to 102 ± 27.8 HU at six months postoperatively, and improving to 453.9 ± 91.4 HU at the donor site after a year. Conclusions: This study demonstrates that there is no need for additional replanting at the donor site following retromolar bone block harvesting, whether autogenous or allograft, since spontaneous healing occurs 12 months following the surgery. [ABSTRACT FROM AUTHOR]

This exploratory case series clinically and histologically investigated the performance of allogeneic cancellous freeze-dried bone allograft (FDBA) bone blocks (Maxgraft®) for the lateral augmentation of local alveolar defects in the posterior maxilla as part of two-staged implant therapy. Five patients receiving eight implants 5 months after block augmentation with a follow-up period of up to 3 years were documented and analyzed. Horizontal alveolar dimensions before and 5 months after block augmentation were quantified using CBCT. Radiographic marginal bone level changes were quantified at implant placement, loading, and 1 year post-placement. Graft integration and resorption were histologically qualitatively evaluated from core biopsies retrieved at implant placement. Block augmentations resulted in a pronounced horizontal median bone gain of 7.0 (5.5 to 7.8) mm. Marginal implant bone levels in block-augmented bone remained constant over the 1 year follow-up period. Block grafts appeared histologically well integrated. Histologic analysis also revealed signs of progressive resorption and new bone formation at the lateral aspects of the grafts. The results of this case series support using Maxgraft® cancellous FDBA blocks as suitable materials for the lateral augmentation of local alveolar defects. [ABSTRACT FROM AUTHOR]

Purpose: The Latarjet procedure is traditionally used to treat chronic anterior shoulder instability associated with glenoid bone loss. However, few series have analyzed outcomes in a female-only population. The objective of this study was to evaluate the clinical and radiological outcomes of a Latarjet bone block in this specific population. Methods: This single-center retrospective study included 15 women (mean age 35 ± 11.3; 19–60) reviewed with a minimum follow-up of 2 years. The procedure was performed using the open bone block screw technique (n = 7) or by arthroscopy with cortical button (n = 8). Clinical evaluation was based on active range of motion measurements, Rowe and Walch–Duplay scores, and subjective shoulder value (SSV). Radiographic analysis explored bone block healing at the last follow-up. Results: At a mean follow-up of 48 months (32–86), no recurrence was reported. The mean Rowe score was 91 points (70–100), Walch–Duplay 90 points (60–100), and SSV 87% (70–100). The active mobilities reached 169° (± 9°) in elevation, 57° (± 15°) in external rotation at side, and 89° (± 6°) in abduction. The return-to-sport rate was 91%. Five patients experienced persistent anterior pain, with screws requiring hardware removal in 2 (p = 0.02). Radiological assessment detected one case of nonunion (7%). Conclusion: Women treated with the Latarjet procedure experienced satisfactory midterm clinical outcomes. The arthroscopic technique using cortical button fixation seems to avoid residual anterior pain requiring hardware removal. [ABSTRACT FROM AUTHOR]

Chronic traumatic anterior shoulder instability can be defined as recurrent trauma-associated shoulder instability requiring the assessment of three anatomic lesions: a capsuloligamentous and/or labral lesion; anterior glenoid bone loss and a Hill–Sachs lesion. Surgical treatment is generally indicated. It remains controversial how risk factors should be evaluated to decide between a soft-tissue, free bone-block or Latarjet-type procedure. Patient risk factors for recurrence are age; hyperlaxity; competitive, contact and overhead sports. Trauma-related factors are soft tissue lesions and most importantly bone loss with implications for treatment. Different treatment options are discussed and compared for complications, return to sports parameters, short- and long-term outcomes and osteoarthritis. Arthroscopic Bankart and open Latarjet procedures have a serious learning curve. Osteoarthritis is associated with the number of previous dislocations as well as surgical techniques. Latarjet-type procedures have the lowest rate of dislocation recurrence and if performed correctly, do not seem to increase the risk of osteoarthritis.

Purpose: The purpose of this systematic review is to report complications, graft failure, fixation methods, rehabilitation protocol, clinical and patient-reported outcomes, and return to sports with the use of quadriceps tendon graft with the bone block (QT-B) and without bone block (QT-S). Methods: According to the PRISMA guidelines a comprehensive search was performed across PubMed/MEDLINE, Scopus, EMBASE, and Cochrane Library databases from inception until April 2022. Only prospective studies using quadriceps tendon autograft with a minimum of 20 patients were considered for inclusion. The outcome measures extracted from the studies were the KT-1000, Lysholm score, Subjective and Objective IKDC, Tegner, Marx Score, complications, failures and/or revision surgery, and rate of return to sports. Cochrane risk of bias and MINORS tool were used for the risk of bias assessment of all included studies. Results: A total of 13 studies were included, consisting of 5 randomized controlled trials, 6 cohort studies, 1 case–control and 1 case series. A total of 484 patients received QT-S in 6 studies of which 224 (46.2%) were males and 212 (43.8%) females with a mean age of 21.5 ± 7.5 (range 14–58). While 243 patients received QT-B in 7 studies of which 167 (68.7%) were males and 76 (31.3%) females with a mean age of 28.9 ± 4.5 (range: 18–49). The studies analyzed had a mean MINORS score of 14.6 (range, 12–19). Both QT-B and QT-S for ACL reconstruction reported satisfactory results in terms of patient-reported outcome measures. Although, a slightly higher anterior laxity was found with the QT-S than with the QT-B. Conclusion: Quadriceps tendon with a bone block (QT-B) or without bone block (QT-S) for ACL reconstruction is supported by current literature. Both grafts are safe and viable options for ACL reconstruction with comparable clinical outcomes, complications and revision rates. Level of evidence: Level IV. Registration: PROSPERO-CRD42022347134; https://www.crd.york.ac.uk/prospero/ [ABSTRACT FROM AUTHOR]

Bone augmentation prior to dental implant placement is a common scenario in the dental implantology field. Among the important intraoral harvesting sites to obtain bone blocks is the ramus/retromolar region that has a high success rate and long-lasting alveolar ridge augmentation. Preserving the bone volume and quality at the donor site is crucial for preventing further complications or to serve as a site for re-harvesting. Healing of the intraoral donor sites has been described in the maxillofacial field. This study aimed to evaluate the spontaneous healing of the mandibular retromolar donor site utilizing computer-assisted quantification 6 and 12 months after bone harvesting. Materials and methods: The study was conducted on patients who underwent an alveolar ridge augmentation using an intraoral retromolar bone graft. Three CBCT scans were performed—intraoperative, and at six months and one year after the surgical procedure. By using the Materialise Mimics Innovation Suite software 26.0 features segmentation by thresholding, Hounsfield unit averaging, and superimposition of the tomographies, we could precisely quantify the healing process utilizing spatial and characteristic measures. Results: In all cases, the computer-aided quantification showed that six months following surgery, the donor site had recovered up to 64.5% ± 4.24 of its initial volume, and this recovery increased to 89.2% ± 2.6 after one year. Moreover, the Hounsfield unit averaging confirmed dynamic bone quality healing, starting at 690.3 ± 81 HU for the bone block, decreasing to 102 ± 27.8 HU at six months postoperatively, and improving to 453.9 ± 91.4 HU at the donor site after a year. Conclusions: This study demonstrates that there is no need for additional replanting at the donor site following retromolar bone block harvesting, whether autogenous or allograft, since spontaneous healing occurs 12 months following the surgery.

This exploratory case series clinically and histologically investigated the performance of allogeneic cancellous freeze-dried bone allograft (FDBA) bone blocks (Maxgraft®) for the lateral augmentation of local alveolar defects in the posterior maxilla as part of two-staged implant therapy. Five patients receiving eight implants 5 months after block augmentation with a follow-up period of up to 3 years were documented and analyzed. Horizontal alveolar dimensions before and 5 months after block augmentation were quantified using CBCT. Radiographic marginal bone level changes were quantified at implant placement, loading, and 1 year post-placement. Graft integration and resorption were histologically qualitatively evaluated from core biopsies retrieved at implant placement. Block augmentations resulted in a pronounced horizontal median bone gain of 7.0 (5.5 to 7.8) mm. Marginal implant bone levels in block-augmented bone remained constant over the 1 year follow-up period. Block grafts appeared histologically well integrated. Histologic analysis also revealed signs of progressive resorption and new bone formation at the lateral aspects of the grafts. The results of this case series support using Maxgraft® cancellous FDBA blocks as suitable materials for the lateral augmentation of local alveolar defects.

A common site to harvest autogenous bone is the posterior mandible (ramus). Bone from this area may be cortical or cancellous in nature with different levels of osteogenic potential. Management of deficient alveolar ridges must be based upon anatomical and biologic characteristics of the donor bone from the ramus. This technical report provides all aspects of the presurgical planning, topographic features of autogenous ramus blocks, and loading concepts according to the biologic characteristics and resorption properties of these blocks. Long-term data from clinical cases are presented improving the clinical outcomes with high predictability. [ABSTRACT FROM AUTHOR]

Objective. To determine the values of Hounsfield units (HU) of the lumbar vertebrae predicting unsatisfactory radiological results of circumferential interbody fusion at the lumbar level. Material and Methods. The data of patients who underwent a single-level decompression and stabilization intervention at the L4–L5 or L5–S1 level for degenerative diseases of the spine were analyzed. The CT images of the lumbar spine were assessed before surgery with the measurement of HU values of the vertebral bodies at the intervention level, as well as CT images one year after surgery to evaluate the degree of interbody block formation and subsidence of the cage. Three groups of patients were distinguished: patients with a formed interbody bone block and without cage subsidence (control group), patients with failed fusion and patients with cage subsidence. Results. The study presents CT data of 257 patients. The incidence of non-union was 32.3 % (83/257), and of cage subsidence – 43.6 % (112/257). The proportion of patients with reduced bone mineral density (BMD) was 26.1 % (67/257). Patients with non-union and subsidence had higher ODI scores (p = 0.045 and p = 0.050, respectively) compared to controls. The presence of fusion failure and subsidence is associated with reduced BMD (p < 0.05), HU values of vertebrae (p < 0.05), and higher ODI score (p < 0.05). According to the ROC analysis, threshold HU values were determined equal to 127 HU, 136 HU and 142 HU for the L4, L5, S1 vertebral bodies, respectively. Upon reaching these values, the risk of a combination of fusion failure and subsidence increases significantly (p = 0.022). Conclusions. Patients with non-union and cage subsidence have less satisfactory clinical outcomes. The HU values of the vertebral bodies equal to 127 HU, 136 HU and 142 HU for the L4, L5, and S1, respectively, are advisable to use in practice to predict non-union and subsidence after a single-level decompression and stabilization intervention at the lower lumbar levels.

Resumen: Introducción: Existen múltiples técnicas para la reconstrucción del defecto óseo glenoideo con bloque óseo en la inestabilidad glenohumeral anterior que reducen el riesgo de recidiva tras cirugía de partes blandas, la mayoría utilizando fijación metálica. El objetivo de este estudio es evaluar la seguridad quirúrgica y los resultados funcionales y radiológicos a corto plazo de los pacientes sometidos a una técnica artroscópica con bloque óseo y fijación sin metal. Material y métodos: Estudio retrospectivo de pacientes con inestabilidad y defecto óseo glenoideo > 15% con 12 meses de seguimiento mínimo. Se sometieron a estudio radiográfico y tomografía axial computarizada. Se cumplimentaron escalas funcionales de manera pre y postoperatoria: el Western Ontario Shoulder Instability Index y la escala de Rowe. Resultados: Se incluyeron un total de 21 pacientes con una edad media de 30,6 (DE 7,1). Todos mostraron consolidación radiográfica a los 3 meses. El 90,4% de los injertos presentó osteólisis en las áreas más periféricas y el 95,2% presentó consolidación en las áreas de contacto con la glenoides. La media del área de superficie de la glenoides pasó del 79,3% preoperatoria al 98,4% a los 12 meses. Los resultados funcionales medios resultaron estadísticamente significativos (p 15% glenoid bone loss operated during 2019 with follow-up of at least 12 months. Radiography and computerized tomography studies were performed. Functional outcomes were evaluated before and after surgery with the Western Ontario Shoulder Instability Index and Rowe score. Results: A total of 21 patients with a median age of 30.6 (SD 7.1) were included. All showed radiographic consolidation at 3 months follow-up. A percentage of 90.4 of bone grafts presented osteolysis at peripherical areas and 95.2% revealed consolidation in the areas with contact to the glenoid. The median glenoid estimated surface went from 79.3% before surgery to 98.4% at 12 months. Functional scores were statically significant (P

Post-instability glenohumeral arthropathy can occur after nonanatomic instability repairs. With advanced secondary arthritis, subsequent shoulder arthroplasty may be complicated by altered surgical anatomy, poor range of motion, subscapularis deficiency, unique glenoid wear patterns, and/or aberrant neurovascular anatomy. The purpose of this study was to evaluate the clinical outcomes of patients undergoing shoulder arthroplasty after previous open nonanatomic anterior shoulder stabilization, particularly glenoid bone block procedures. Between 2008 and 2014, all patients with shoulder arthroplasty for symptomatic post-instability glenohumeral arthropathy after prior open stabilizations were identified from surgical case logs of two senior shoulder surgeons. Demographic variables were extracted from electronic medical records, operative reports, and preoperative and postoperative radiographs, and a minimum 24-month follow-up with completion of patient-reported questionnaires was required. Postoperative active forward elevation and active external rotation were recorded. The primary outcome measures were the visual analog scale for pain, American Shoulder and Elbow Surgeons Shoulder score, and the Simple Shoulder Test. Perioperative complications and rates of secondary reoperation were extracted. A total of 12 patients were identified with an average age of 63 ± 12 years (range, 46-83), including 7 males and 5 females, and index surgery included open Bristow (n = 7), open Latarjet (n = 2), iliac crest bone graft (n = 1), and Putti-Platt procedure (n = 2). Seven patients underwent anatomic TSA, 4 reverse TSA, and 1 hemiarthroplasty. At an average of 44 ± 21 months follow-up, average active forward elevation and active external rotation improved from 100 ± 36 preoperatively to 132 ± 41 (P =.12) postoperatively and 19 ± 15 to 49 ± 11 (P <.01), respectively. The average visual analog scale decreased from 5 ± 3 to 1 ± 2 (P <.01) and mean American Shoulder and Elbow Surgeons improved from 44 ± 23 to 79 ± 17 (P <.01); and the average Simple Shoulder Test improved from 4 ± 2 to 9 ± 3 (P <.01). No perioperative complications or secondary reoperations were required, and only one patient experienced subsequent instability due to subsequent shoulder trauma. Despite the surgical complexity and unique challenges associated with post-instability arthropathy, shoulder arthroplasty after prior open anterior bone block procedure or nonanatomic reconstruction is a safe procedure with low risk of perioperative complication, subsequent shoulder instability, or secondary revision surgery. All patients experienced significant improvements in pain, range of motion, and self-reported function at short- to mid-term follow-up. [ABSTRACT FROM AUTHOR]

Abstract Background In terms of a highly atrophic maxilla, bone augmentation still remains very challenging. With the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) for allogeneic bone blocks, a new method for the treatment of bone deficiencies was created. This case report demonstrates the successful use of two specially designed and CAD/CAM manufactured allogeneic bone blocks for a full arch reconstruction of a highly atrophic maxilla with an all-on-six concept. Case presentation We report the case of a 55-year-old male patient with a highly atrophic maxilla and severe bone volume deficiencies in horizontal and vertical lines. In order to treat the defects, the surgeon decided to use a combination of two allogeneic bone blocks and two sinus floor augmentations. The bone blocks were fabricated from the data of a cone beam computed tomography (CBCT) using CAD/CAM technology. After the insertion of the two bone blocks and a healing period of 7 months, six dental implants were placed in terms of an all-on-six concept. The loading of the implants took place after an additional healing time of 7 months with a screw-retained prosthetic construction and with a milled titanium framework with acrylic veneers. Conclusion The presented procedure shows the importance of the precise design of CAD/CAM manufactured allogeneic bone blocks for the successful treatment of a highly atrophic maxilla. Proper soft-tissue management is one of the key factors to apply this method successfully.

Copyright of Obere Extremitat is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Introduction: The surgical treatment of anterior shoulder instability with arthroscopic cortical-button Latarjet procedure has been the subject of very few medium and long-term studies. The aim of this study was to analyze the clinical and radiological results of arthroscopic cortical-button Latarjet procedure with minimum 5 years follow-up., Method: This is a monocentric retrospective study including 40 patients who have undergone shoulder stabilization with primary arthroscopic cortical-button Latarjet procedure and been reviewed with minimum 5 years follow-up. The average age at the time of surgery was 26.6 years (16 - 59; ± 10) and 92.5% were sporty individuals. The average ISI score was 6 points (2- 9; ± 1,6). The clinical evaluation involved active range of motion measurement, apprehension test, Rowe and Walch-Duplay scores, SSV and Net Promoter Score. Radiologically, evolution of the bone graft and degenerative arthritis of the shoulder joint were analyzed at the last follow-up., Results: At an average follow-up of 71 months (60 - 97; ± 12), 3 patients (7.5%) experienced recurrence as a dislocation or subluxation, which was responsible for revision in 1 case. Moreover, apprehension persisted in 6 (16%) patients. There were no significant restrictions in recovery of active ranges of motion, including external rotation. Return to sports was effective in 94.6% of cases. The average Rowe and Walch-Duplay scores were 87 points (15 - 100; ± 20) and 88 points (15 - 100; ± 19) respectively. SSV was 91% (10 - 100; ± 16) and NET Promoter Score was 9.3 points (5 - 10; ± 1,3). Radiologically, degenerative arthritis occurred in 18.7% of patients, mainly asymptomatic stage 1 (9.4%). Bone healing was acquired in 72% of cases and partial lysis of the bone block in 41%., Conclusion: At an average follow-up of 6 years, arthroscopic cortical-button Latarjet procedure effective, enabling return to sport in 95% of cases. Onset of asymptomatic arthritis seems similar to conventional techniques but justifies a more long-term follow-up., (Copyright © 2024. Published by Elsevier Inc.)

The purpose of this study was to assess the outcomes of a new arthroscopic Trillat technique at a 2-year follow-up. Our current hypothesis was that this technique could be used for the effective treatment of chronic post-traumatic unidirectional anterior shoulder instability, and that the recurrence and complication rates, external rotation, and functional outcomes would be as good as those of the reference technique. Between April 2012 and August 2016, all patients older than 16 years who underwent the arthroscopic Trillat technique for unidirectional chronic post-traumatic anterior shoulder instability at the Dijon University Hospital (France), after the failure of well-conducted medical and rehabilitation treatment with at least 24 months of follow-up, were included. Criteria for noninclusion were association with posterior and/or inferior instabilities, voluntary instabilities, and glenoid bone loss greater than 20%. Patients attended follow-up with their surgeon before the intervention, in the immediate postoperative period, at 6 weeks, 3 and 6 months, and then by an independent observer for the last evaluation. Patients were then examined clinically with scores such as Constant, Rowe and Walch-Duplay scores, and subjective shoulder value, for shoulder range of motion, and radiographically (anteroposterior and Lamy's lateral x-rays of the operated shoulder). Forty-nine patients and 52 shoulders were included, with a mean follow-up of 40 months (range, 24-71 months). The recurrence rate of instability was 3.8% (2 of 52). No conversion to arthrotomy was necessary. No intraoperative complications, postoperative neurological lesions, or sepsis were observed. The mean Constant score was 92.1 (77.5-100) points, Walch-Duplay 82.9 (40-100), Rowe 81.73 (5-100), and subjective shoulder value 86.1 (50-100) at the last follow-up. The arm at side external rotation limitation averaged 8.4° (–25° to 40°) and the external rotation with 90° arm abduction limitation 0.34° (–5° to 15°). Forty-one patients (79%) resumed their sports activity at the same level. Fifty patients (96%) were satisfied to very satisfied. One patient developed nonunion of the coracoid process and subsequently underwent a Latarjet procedure with a good outcome. The arthroscopic Trillat procedure offers good outcomes as a first-line treatment for chronic anterior post-traumatic glenohumeral instability. It should be excluded in cases of glenoid loss greater than 20%. [ABSTRACT FROM AUTHOR]

Improved techniques and increased surgeon experience have optimized surgical care in patients with recurrent shoulder instability. Several techniques are used for surgical repair of shoulder instability, yet there are limited data on how utilization has changed over the past decade. The aim of this study was to assess trends in the utilization rate and patient demographic characteristics (age and sex) from 2010 to 2019 for 4 shoulder instability procedures: coracoid transfer/Latarjet procedure (LP), anterior bone block (ABB), open Bankart repair (OBR), and arthroscopic Bankart repair (ABR). We identified >87,000 patients using an all-payer claims database. The utilization rate was defined as the number of cases of a procedure divided by the total number of surgical cases for shoulder instability for any given year. Age was divided into 3 groups: <25 years, 25-35 years, and >35 years. Trends were reported in terms of the compounded annual growth rate (CAGR). Although ABR was the most common shoulder instability procedure overall (91% utilization rate), the LP had the greatest increase in utilization from 2010 to 2019 (2.0% to 4.5%; CAGR, +9.8%). In comparison, the utilization of ABB procedures increased by 4.3% annually whereas that of OBR declined by 6.9% annually. The utilization of ABR showed minimal change. Notably, the LP was performed more frequently in younger patients over time. The percentage of patients aged < 25 years who underwent the LP increased from 30% to 41% from 2010 to 2019 (CAGR, +3.4%). There was a trend toward the performance of more LPs in men than in women (+1.2% vs. −3.5%, P <.05), although most cases (68%) were still performed in men. ABR continues to account for most shoulder instability procedures. The LP had the greatest increase in the utilization rate from 2010 to 2019 and has now surpassed OBR in the utilization rate. ABB procedures are also being more frequently performed but only represent a minority of stabilization cases. During the course of the study period, a greater percentage of patients undergoing shoulder instability procedures were male individuals and were aged < 25 years. [ABSTRACT FROM AUTHOR]

The broad range of movement of the glenohumeral joint means that anatomical or traumatic aberrations can predispose the shoulder to instability and dislocations. This pathology predominantly affects young patients, especially males, partaking in contact sports and those with hyperlaxity. Both non-operative and operative treatment strategies aim to reduce further instability episodes, which have been shown to predispose patients to early osteoarthritis. A number of patient-related and anatomical factors need to be taken into consideration when deciding between the various available management strategies, which each have their own potential complications, predisposition to recurrent dislocation and technical profiles. The degree of humeral and glenoid bone loss is a key factor in increasing the likelihood of recurrent dislocation and can therefore influence whether surgery is undertaken, or if the bone loss needs to be addressed in addition to soft tissue stabilization. [ABSTRACT FROM AUTHOR]

Background: In terms of a highly atrophic maxilla, bone augmentation still remains very challenging. With the introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) for allogeneic bone blocks, a new method for the treatment of bone deficiencies was created. This case report demonstrates the successful use of two specially designed and CAD/CAM manufactured allogeneic bone blocks for a full arch reconstruction of a highly atrophic maxilla with an all-on-six concept. Case presentation: We report the case of a 55-year-old male patient with a highly atrophic maxilla and severe bone volume deficiencies in horizontal and vertical lines. In order to treat the defects, the surgeon decided to use a combination of two allogeneic bone blocks and two sinus floor augmentations. The bone blocks were fabricated from the data of a cone beam computed tomography (CBCT) using CAD/CAM technology. After the insertion of the two bone blocks and a healing period of 7 months, six dental implants were placed in terms of an all-on-six concept. The loading of the implants took place after an additional healing time of 7 months with a screw-retained prosthetic construction and with a milled titanium framework with acrylic veneers. Conclusion: The presented procedure shows the importance of the precise design of CAD/CAM manufactured allogeneic bone blocks for the successful treatment of a highly atrophic maxilla. Proper soft-tissue management is one of the key factors to apply this method successfully. [ABSTRACT FROM AUTHOR]

Nowadays, implant dentistry is strongly interconnected to bone augmentation procedures. Lateral ridge augmentation is often an imperative treatment stage for successful, prosthetic-driven implant placement. This study aimed to comparatively analyze the immediate postoperative complications of two horizontal bone grafting procedures: sticky bone and bone shell technique. Records of patients with lateral ridge augmentation were analyzed to identify immediate postoperative complications. The study group included 80 patients divided into 40 control (bone-shell technique -- BS) and 40 tests (sticky bone --SB). More patients reported moderate and severe pain in the BS -- group (11 patients -- 27.5%) than in the SB group (6 patients -- 15%). In the BS group, the incidence of severe and moderate trismus, neurosensory disturbances, and important hematoma was higher. There was an increased inflammatory response following the bone shell technique, while the sticky bone technique proved reduced surgical morbidity. There was no difference between the two groups in the risk of dehiscence or infection. [ABSTRACT FROM AUTHOR]

Copyright of Implantologie is the property of Quintessenz Verlags GmbH and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: The purpose of this case report was to present a method for the assessment of volumetric changes of bone blocks during healing and demonstrate its practicability by analysing the resorption of a preshaped allogeneic bone block used for the reconstruction of a complex maxillary defect. Materials and methods: CBCT-scans of a 19-year-old male treated with an allogeneic bone block were recorded pre-OP, post-OP, and following six months of healing. Graft shrinkage was assessed via two image matching tools, namely coDiagnostiX® and Slicer. A biopsy specimen was harvested along the implant canal at the time of implantation. Results: The osseous defect was successfully restored and advanced graft remodelling was found upon re-entry as confirmed by the histomorphometric and histologic analysis. The initial volumes of the graft determined via coDiagnostiX® and Slicer were 0.373 mL and 0.370 mL., respectively, while graft resorption after six months of healing was 0.011 mL (3.00%) and 0.016 mL (4.33%). Conclusions: The avoidance of bone harvesting and reduction of invasiveness display an important issue in dentoalveolar restorations. However, before grafting materials can be considered a safe alternative, understanding their clinical performance, especially resorption stability, is pivotal. The present case report demonstrates a limited resorption of the allogeneic bone block and further emphasizes the practicability of determining bone resorption by the here introduced method. As our investigation comprises solely one subject, the results should be considered with care and substantiated by further studies.

Purpose: The purpose of this study was to evaluate three different methods of attachment of continuous loop suspensory cortical preparation of all soft tissue central quad tendon grafts compared to a bone block control for anterior cruciate ligament reconstruction on construct displacement and load to failure. Methods: Thirty-two cadaveric central quadriceps tendon (CQT) specimens were harvested, using three clinical techniques for graft fixation: cortical button alone (BTB EB), BTB cortical button with rip-stop suture (BTB RS), and continuous loop cortical button (BTB CL). A control group was also included that consisted of a bone block secured within testing clamps (BTB CON). Specimens were preloaded to 150 N. Tendons were then cyclically loaded between 50 N and 250 N for 1,000 cycles at .5 Hz. Displacement was measured at the point of fixation of the CQT after the 150 N preload, 250 N initial load and every 100th cycle. The specimens were loaded to failure after 1,000 cycles. Results: There was a significant increase in displacement from .32 ± .56 mm for the BTB CON to 1.91 ± 1.13 mm for the BTB RS (P = .014) and 3.85 ± 2.32 mm for the BTB CL condition (P = .023). There was no significant increase in displacement for BTB EB (P = .182). Failure occurred for all of the BTB CL and 62.5% of the BTB EB specimens within the first 50 cycles. Twenty-five percent of the BTB CON specimens and 12.5% BTB RS failed at ∼400 and 500 cycles, respectively. Similar failure loads were observed for the BTB CON and the BTB RS (446.4 ± 151.46 N vs 505.74 ± 131.41 N; P = .99) Failure testing was not feasible for the BTB CL and BTB EB preparation methods. Conclusion: In response to cyclic loading, the three all-soft tissue suspensory conditions experienced significantly greater displacement compared to the bone block controls. None of the soft-tissue conditions appeared superior when compared to each other. Clinical Relevance: It remains unknown which method of soft-tissue suspensory provides optimal fixation. As these autografts become more common, it is essential to evaluate which fixation methods provide superior outcomes

Background: The Latarjet and bone block procedures can be secured with screws or cortical buttons. The purpose of this biomechanical study was to compare quadruple buttons vs. double screws for fixation of anterior glenoid bone grafts. Methods: Twelve cadaveric scapulae (6 pairs) were denuded, resected, and potted. Pairs were randomized to quadruple-button or double-screw fixation after creation of a 15% anterior glenoid defect. The specimens underwent cyclic uniaxial compressive glenoid loading between 50 and 200 N for 1000 cycles at 1 Hz. Testing was repeated for conjoint tendon loads of 0 N (simulating a bone block procedure), 10 N, and 20 N (simulating a Latarjet procedure). Peak resultant relative coracoid graft displacement was optically tracked at 3 points (superior, central, and inferior) on the edge of the coracoid. Results: No significant differences were found between buttons and screws for bone block applications or with 10 N of conjoint tendon loading (P ≥ .095). At 20 N of conjoint tendon loading, however, the screws were significantly more stable than the buttons (P ≤ .023). During the initial 20-N conjoint load application, all 3 points displaced significantly more with the button reconstruction than with the screws (P ≤ .01). Overall, mean displacements did not exceed 1 mm at any position on the coracoid, regardless of testing condition. Conclusions: The quadruple-button technique is comparable to screws when the coracoid is used as a bone block or when conjoint tendon loading is minimized. However, at higher conjoint tendon loads, the screws produced a more stable coracoid graft than the buttons.

Copyright of Acta Stomatologica Croatica is the property of Acta Stomatologica Croatica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Recurrence of anterior instability after arthroscopic Bankart prevents return to sports and remains a surgical challenge. We aim to assess clinical and radiologic outcomes after coracoid bone-block performed either open or under arthroscopy, for the management of failed arthroscopic Bankart Fifty-nine consecutive patients with anterior instability recurrence after arthroscopic Bankart were revised with a Bristow or Latarjet procedure performed either open (25 cases) or under arthroscopy (34 cases). Patients were reviewed for clinical and radiologic examination at a minimum 2-year follow-up. Glenohumeral bony lesions were evaluated preoperatively with computed tomographic scans. Postoperative bone-block position, union, and postinstability arthritis were also evaluated. The mean follow-up was 89 months (24-193). The epidemiologic analysis showed that patients with failed arthroscopic Bankart were young (age <23 years), 58 (98%) were practicing sports, with contact/forced overhead sports (53%), often in competition (53%), had hyperlaxity (71%), and for the most part of them glenohumeral bone loss (88%). Their mean preoperative Instability Severity Index Score was 5.4 ± 2.2 points. After revision with Bristow-Latarjet procedure, 53 patients (91%) returned to sports, 37 (70%) to their previous sports activity, and 17 (46%) to their previous level. No patient suffered recurrent dislocation. Four patients (7%) had recurrent subluxations, all after open procedure; 8 patients (14.5%) had persistent anterior apprehension. A large and deep Hill-Sachs lesion was a risk factor for persistent anterior apprehension (P =.002) and lower level when returned to sports (P =.04). Ninety-two percent of bone-blocks were positioned flush with the glenoid anterior rim, with 84% of bone union. At last follow-up, 5% of patients had severe postinstability osteoarthritis (Samilson 4). The Bristow-Latarjet, performed either open or under arthroscopy, is an efficient procedure to restore shoulder stability and allow returning to sports in patients with failed arthroscopic Bankart and glenoid bone loss. Patients with a large and deep Hill-Sachs lesion had more persistent anterior apprehension and a lower sports level. [ABSTRACT FROM AUTHOR]

Introduction: Glenohumeral instability occurs in active-age patients with high recurrence rates in previously described treatments. The objective of the study was to analyze the functional and radiographic results of the patients that underwent a modified Eden-Hybinette technique. Material and methods: From January 2017 to December 2019, 14 patients with post-traumatic anterior glenohumeral instability with glenoid bone loss higher or equal to 15% with or without Hill-Sachs lesion were included, qe used the modified Eden-Hybinette technique and outcomes were evaluated with WOSI and ROWE scales pre and post-procedure at 6, 12, and 24 months follow-up, a CT scan was performed at 6 weeks to evaluate the integration of the graft. Results: Five women (35%) and nine men (65%) with a mean age of 39.1 (± 14) years were included. Ten involved the right shoulder (71.4%) and four the left one (28.5%). The results of WOSI and ROWE scales were statistically significant (p ≤ 0.05) in postsurgical evaluations as in all periods analyzed in contrast to a presurgical standing point; components of the WOSI test were also viewed separately (Sports, Lifestyle, Emotion, and Physical Symptoms) to assess if any of those separately could've altered or significantly influenced the total score obtained, but we found statistical significance (p ≤ 0.05) in all parameters. There was no recurrence or complications until the last follow-up. Conclusions: The modified Eden-Hybinette technique offers good short-term functional results. It is a safe technique. Further studies are necessary to determine the effectiveness and possible long-term results and complications. [ABSTRACT FROM AUTHOR]

Gingival recessions constitute serious limitations for effective interdisciplinary periodontal, orthodontic, and implant therapy. A proper bone morphology of the alveolar bone and soft tissues that cover it are interdependent. The regeneration procedures known to date are based on the use of autogenous bone, or its allogeneic, xenogeneic, or alloplastic substitutes. These substitutes are characterized by different osteogenesis potentials. No effective procedure for three-dimensional bone reconstruction for cases in which there is dentition with recessions has been described to date, especially in its vertical dimension. This article presents the patented method of the three-dimensional bone reconstruction of the anterior mandible with preserved dentition when using an allogeneic bone block, and also includes a case report with a 2-year follow-up as an example. Based on clinical observations, it was stated that the intended therapeutic effect was achieved. There was no recession, shallowing of the vestibule, signs of inflammation, or pathological mobility of the teeth in the area undergoing reconstruction. The radiographic images revealed the formation of a new layer of cortical bone on the vestibular side and a certain volume of cancellous bone. No radiological demarcation zone of brightening, which indicates an incomplete adaptation, integration, and reconstruction of the bone block, was found. [ABSTRACT FROM AUTHOR]

Background: Meniscal allograft transplantation (MAT) has become a viable treatment option for patients with symptomatic meniscal deficiency. Some patients experience early surgical meniscal allograft failure attributed to causes that have not yet been sufficiently clarified. Purpose: To evaluate the prevalence, types, and distribution of arthroscopically confirmed meniscal allograft tears and the associated effect on surgical meniscal allograft survival. Study Design: Cohort study; Level of evidence, 3. Methods: Patients undergoing MAT with a minimum 2-year follow-up were retrospectively reviewed. Descriptive and surgical data were collected. Type and location of arthroscopically confirmed meniscal allograft tears were recorded and compared between medial and lateral allografts and suture-only and bone block fixation. A survival analysis was conducted to evaluate the effect of meniscal allograft tears on surgical meniscal allograft survival. Results: This study included 142 patients (54% male; mean ± SD age, 29.6 ± 10.4 years) with a mean follow-up of 10.3 ± 7.5 years. The prevalence of meniscal allograft tears was 32%, observed at a median of 1.2 years (interquartile range, 2.8 years) after MAT. The posterior horns were most frequently affected, followed by the posterior roots, midbodies, anterior horns, and anterior roots. The most frequently observed tear types were root tears (43%), followed by longitudinal, horizontal, radial, complex, bucket-handle, and meniscocapsular separation tears. A statistically significant association was found between meniscal allograft tear types and fixation techniques (P =.027), with root tears predominant after suture-only as compared with bone block fixation (57% vs 22%). Patients with meniscal allograft root tears were a mean of 5.4 years (95% CI, 1.6-9.2 years; P =.007) younger than were patients without root tears. The 1-year surgical meniscal allograft survival rate was significantly lower for torn versus intact meniscal allografts (75% vs 99%; P <.001). Conclusion: Meniscal allograft root tears were predominant, associated with younger patient age, and more often observed when using the suture-only fixation technique versus the bone block fixation technique. Torn meniscal allografts were associated with early surgical graft failure when compared with intact meniscal allografts, resulting in a significantly lower 1-year survival rate. [ABSTRACT FROM AUTHOR]

During autogenous mandibular bone harvesting, there is a risk of damage to anatomical structures, as the surgeon has no three-dimensional control of the osteotomy planes. The aim of this proof-of-principle case report is to describe a procedure for harvesting a mandibular bone block that applies a computer-guided surgery concept. A partially dentate patient who presented with two vertical defects (one in the maxilla and one in the mandible) was selected for an autogenous mandibular bone block graft. The bone block was planned using a computer-aided design process, with ideal bone osteotomy planes defined beforehand to prevent damage to anatomical structures (nerves, dental roots, etc) and to generate a surgical guide, which defined the working directions in three dimensions for the bone-cutting instrument. Bone block dimensions were planned so that both defects could be repaired. The projected bone block was 37.5 mm in length, 10 mm in height, and 5.7 mm in thickness, and it was grafted in two vertical bone augmentations: an 8 x 21-mm mandibular defect and a 6.5 x 18-mm defect in the maxilla. Supraimposition of the preoperative and postoperative computed tomographic images revealed a procedure accuracy of 0.25 mm. This computer-guided bone harvesting technique enables clinicians to obtain sufficient autogenous bone to manage multiple defects safely. [ABSTRACT FROM AUTHOR]

Purpose: Glenoid augmentation using free bone blocks for anterior shoulder instability has been proposed as an alternative to or bail-out for the Latarjet procedure. The purpose of this investigation was to systematically review and compare outcomes of patients undergoing glenoid augmentation using free bone block autografts versus allografts.Methods: A systematic review using PubMed, MEDLINE, Embase, and the Cochrane Library databases was performed in line with the PRISMA statement. Studies reporting outcomes of patients treated with free bone block procedures for anterior shoulder instability with minimum 2-year follow-up were included. Random effects modelling was used to compare patient-reported outcomes, return to sports, recurrent instability, non-instability related complications, and development of arthritis between free bone block autografts and allografts.Results: Eighteen studies comprising of 623 patients met the inclusion criteria for this investigation. There were six studies reporting on the use of allografts (of these, two used distal tibial, three iliac crest, and one femoral head allograft) in 173 patients and twelve studies utilizing autografts (of these, ten used iliac crest and two used free coracoid autograft) in 450 patients. Mean age was 28.7 ± 4.1 years for the allograft group and 27.8 ± 3.8 years for the autograft group (n.s). Mean follow-up was 98 months in autograft studies and 50.8 months for allograft studies (range 24-444 months, n.s). Overall mean increase in Rowe score was 56.2 with comparable increases between autografts and allografts (n.s). Pooled recurrent instability rates were 3% (95% CI, 1-7%; I2 = 77%) and did not differ between the groups (n.s). Arthritic progression was evident in 11% of autografts (95% CI, 2-27%; I2 = 90%) and 1% (95% CI, 0-8%; I2 = 63%) of allografts (n.s). The overall incidence of non-instability related complications was 5% (95% CI, 2-10%; I2 = 81%) and was similar between the groups (n.s). Pooled return to sports rate was 88% (95% CI, 76-96%; I2 = 76%).Conclusion: Glenoid augmentation using free bone block autograft or allograft in the setting of recurrent anterior shoulder instability with glenoid bone loss is effective and safe. Outcomes and complication incidence using autografts and allografts were comparable. Due to the high degree of heterogeneity in the data and outcomes reported in available studies, which consist primarily of retrospective case series, future prospective trials investigating long-term outcomes using free bone block autograft versus allograft for anterior shoulder instability with glenoid bone loss are warranted.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Background. Bone augmentation ensures a favorable 3-dimensional position of implants. Onlay grafting is one of the techniques in ridge augmentation, which can be performed with the use of xenogenous blocks. Methods. Three cases of the vertical and horizontal ridge are discussed, which were augmented using xenogenous blocks. The blocks were shaped in a favorable size and puzzled along the grafting area. All the gaps were filled with granular xenografts. The flaps were coronally advanced to obtain primary closure. Results. An average of 4.2-mm gain in width and 4.2-mm gain in height of the ridge was observed at the implantation stage. Conclusion. The outcomes of these cases could pave the way for suggesting xenograft blocks for augmenting wide areas of the alveolar ridge on average of 4 mm in width and height in selected cases as an alternative to standard autogenous blocks. Long-lasting xenograft ensures implant and lip support in the esthetic zone.

Aims: To evaluate the stability of 2 canal occlusion systems; an autologous, compacted bone block and the biodegradable C-plug. We also sought to investigate any relationship between stability of the systems and the quality of cementation. A retrospective radiographic comparative review was conducted. Methods: A total of 203 consecutive patients were analysed, 89 received an autologous bone block and 114 had C-plugs. There was no significant differences between the groups in terms of age, sex and primary diagnosis. The mean cement tail length in the bone block group (6.42 mm; range 0–31) was significantly shorter than in the C-plug group (17.11 mm; range 0–65.7). Results: The proportion of patients with good quality of cementation (Barrack grade A) was significantly higher in the bone block group (80.6%) as compared to the C-plug group (56%) (p < 0.001). There was a negative correlation between the length of the cement tail and the Barrack grade, indicating that a short cement tail is associated with better quality cementation. Conclusions: We have shown that improved cement penetration and shorter cement tails can be achieved with the cheapest of all options for canal occlusion, an autologous compacted bone block and hence recommend this technique. [ABSTRACT FROM AUTHOR]

Background: New types of glenoid bone block fixation, involving suture buttons, suture anchors or even implant-free impaction of the graft, have been recently introduced. In contrast to screws which allow for a rigid fixation of the bone block, these alternative procedures provide a non-rigid type of fixation. Methods: Two reviewers independently conducted the search in a systematic way (according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) using the MEDLINE/PubMed database and the Cochrane Database of Systematic Reviews. These databases were queried with the terms "Latarjet" OR "Eden-Hybbinette" OR "bone block" AND "anterior" AND "shoulder" AND "instability." Results: Eight out of the 325 initial studies were finally chosen according to our inclusion–exclusion criteria. In total, 750 patients were included in this review. The overall anterior instability recurrence rate for patients treated with non-rigid fixation was 2.6%, while the overall rate of non-union or graft osteolysis was 5.4%. Conclusions: Regardless of the graft type, bone block non-rigid fixation showed satisfactory clinical and functional outcomes for the treatment of anterior shoulder instability with substantial glenoid bone deficiency. Furthermore, non-rigid fixation resulted in adequate bone graft healing and osseous incorporation. Lastly, given the relative lack of data, further prospective controlled studies are required to assess bone block non-rigid fixation procedures in comparison with the traditional rigid (with screws) fixation techniques. Level: Systematic review, IV. [ABSTRACT FROM AUTHOR]

Background: Free bone block (FBB) procedures for anterior shoulder instability have been proposed as an alternative to or bail-out for the Latarjet procedure. However, studies comparing the outcomes of these treatment modalities are limited. Purpose: To systematically review and perform a meta-analysis comparing the clinical outcomes of patients undergoing anterior shoulder stabilization with a Latarjet or FBB procedure. Study Design: Systematic review and meta-analysis; Level of evidence, 4. Methods: PubMed, Embase, and the Cochrane Library databases were systematically searched from inception to 2019 for human-participants studies published in the English language. The search was performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement including studies reporting clinical outcomes of patients undergoing Latarjet or FBB procedures for anterior shoulder instability with minimum 2-year follow-up. Case reports and technique articles were excluded. Data were synthesized, and a random effects meta-analysis was performed to determine the proportions of recurrent instability, other complications, progression of osteoarthritis, return to sports, and patient-reported outcome (PRO) improvement. Results: A total of 2007 studies were screened; of these, 70 studies met the inclusion criteria and were included in the meta-analysis. These studies reported outcomes on a total of 4540 shoulders, of which 3917 were treated with a Latarjet procedure and 623 were treated with an FBB stabilization procedure. Weighted mean follow-up was 75.8 months (range, 24-420 months) for the Latarjet group and 92.3 months (range, 24-444 months) for the FBB group. No significant differences were found between the Latarjet and the FBB groups in the overall random pooled summary estimate of the rate of recurrent instability (5% vs 3%, respectively; P =.09), other complications (4% vs 5%, respectively; P =.892), progression of osteoarthritis (12% vs 4%, respectively; P =.077), and return to sports (73% vs 88%; respectively, P =.066). American Shoulder and Elbow Surgeons scores improved after both Latarjet and FBB, with a significantly greater increase after FBB procedures (10.44 for Latarjet vs 32.86 for FBB; P =.006). Other recorded PRO scores improved in all studies, with no significant difference between groups. Conclusion: Current evidence supports the safety and efficacy of both the Latarjet and FBB procedures for anterior shoulder stabilization in the presence of glenoid bone loss. We found no significant differences between the procedures in rates of recurrent instability, other complications, osteoarthritis progression, and return to sports. Significant improvement in PROs was demonstrated for both groups. Significant heterogeneity existed between studies on outcomes of the Latarjet and FBB procedures, warranting future high-quality, comparative studies. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to evaluate the union rate and risk factors for delayed union in the early postoperative period after an arthroscopic Latarjet with double-button fixation.Method: In a retrospective study, postoperative CT scans at 3 months were analysed following an arthroscopic Latarjet with double-button fixation used to treat anterior shoulder instability. Healing of the bone block, its position in the sagittal and coronal planes, and the contact area graft/scapula were analysed.Results: Ninety-eight CT scans (98 patients) were included. The rate of healing at 3 months was 63/98 (64%) and four grafts clearly migrated. The position was perfectly flush to the glenoid rim in 67% and under the equator in 96%. The mean contact graft/scapula area was 135 mm 2 (4-420). In multivariate analysis, the risk of non-union at 3 months was associated with tobacco consumption (p = 0.001, aOR = 12.17 95% CI [2.62-56.49]), absence of preoperative glenoid bone defect (p = 0.003, aOR = 8.06 95% CI [2.06-31.56]), and a contact area graft/scapula less than 120 mm 2 (p = 0.010, aOR = 5.25 95% CI [1.50-18.40]). Among 31 non-united grafts, 93% definitively healed on CT scan at 1 year, leaving an overall rate of 93% of united grafts at last follow-up.Conclusions: The rate of union at 3 months after an arthroscopic Latarjet with double-button fixation was 64%, reaching 93% at 1 year. This procedure should be carefully indicated in case of tobacco use or instability without glenoid bone defect, especially when the shoulder is exposed to high-energy trauma in the early phase after surgery. [ABSTRACT FROM AUTHOR]

Alveolar reconstructive surgery employs a variety of surgical techniques and biomaterials, with a particular focus on bone blocks as a crucial methodology for restoring and augmenting deficient bone structures. Bone blocks are often employed to support periodontal health or as a foundation for future prosthetic rehabilitation with dental implants. This systematic review investigated recent advances in bone blocks for alveolar bone reconstruction, comparing autologous, allogeneic and xenogeneic types. A search of PubMed identified 56 records, of which 21 were included in the qualitative analysis. The studies involved 685 patients in total. Bone blocks are pivotal for three-dimensional bone regeneration, providing a stable scaffold for achieving the desired bone volume during healing. Autologous bone, harvested from the patient, boasts high biocompatibility, excellent osteogenic properties and minimal immunologic risks. However, its drawbacks include the need for an additional surgical site and extended procedural times. Allogeneic bone blocks involve transferring bone between individuals, offering increased graft availability and customization options without requiring a second surgical site. However, they exhibit moderate resorption rates and carry a heightened risk of immunologic reactions and disease transmission. Innovative techniques, such as tunneling, laser osteotomy, graft customization, and platelet-rich fibrin (PRF) application on wound during surgical treatment show promise in enhancing alveolar bone reconstruction efficacy. In conclusion, despite the traditional preference for autologous bone, the review suggests that alternative materials, particularly individualized allogeneic bone blocks, coupled with modern techniques, could emerge as a standard procedure for regenerating alveolar bone defects due to their satisfactory results and potential advantages.