Search

In renewable energy-based generation sources a phase locked loop is one of the most popular synchronization techniques. A rapid and precise grid voltage phase and frequency estimation under a wide spectrum of possible grid disturbances is its main objective. This paper compares popular grid synchronization algorithms on grid voltage anomalies. The compared algorithms are divided in three groups: without filtering, with filtering in synchronous reference frame and with filtering in stationary reference frame. The behaviour of the algorithms is tested in a laboratory, using dSpace 1103 as a platform on which the algorithms are compiled and OMICRON CMC 356 as a programmable grid voltage generator. The benchmarks conducted in this paper include voltage sags, grid voltages harmonics, DC offset and frequency step change. The obtained results show that there are significant differences in tested PLL responses for some networks disturbances. [Projects of the Serbian Ministry of Education, Science and Technological Development, Grant no. III 44004 and Grant no. III 44006]

In this paper, the topology of the adjustable speed drive with active front end rectifier is considered in terms of application in multi-motor drives. A dynamic model of the rectifier with a coupled LCL filter is presented. A simulation model has been developed for the analysis of multi-motor drive system dynamics and power flow. Based on the simulation model, the functional possibilities of reversible induction motor drive with active front end converter and multiple voltage source inverters on a common DC bus at the motor side are analysed. One example of the application of a complex full regenerative multi-motor drive system on a common DC bus for an industrial crane, implemented with Siemens converters, is shown. The motor and generator mode of operation from the aspect of energy saving as well as the influence of drives on the distribution network from the aspect of higher harmonics and power factors are analysed. Siemens's original software, Starter commissioning tool, for drives configuration and data acquisition is used.

This paper proposes the enhancement of a synchronous reference frame phase-locked loop in terms of its dynamic response and disturbance rejection capability. The improvements were undertaken in order to upgrade the converter grid support capability required by modern grid codes during grid faults. The proposed repetitive control-based filter is inserted in the loop filter structure of the phase-locked loop. For the initially proposed structure, the necessity of the phase angle error correction term was derived and added at the output of the loop filter. On a set of tests that included (i) phase jump; (ii) voltage sag; (iii) voltage harmonics; (iv) DC offset; (v) random noise and; (vi) frequency change, the synchronization algorithm with the proposed modification showed two desirable characteristics: (i) a high attenuation of oscillations on specific frequencies; and (ii) the instant compensation of the portion of the phase angle jump. Along with the benefits, drawbacks of the proposed synchronization method were noted, the most important being the high dependency of the oscillation attenuation capability on the fundamental frequency drift and susceptibility to high-frequency noise. With the proposed modification, the synchronization algorithm manages to achieve a phase angle settling time not longer than one fundamental frequency period in all of the conducted tests.

The aim of this paper is to present the enhancement of the synchronous reference frame phase-locked loop with a repetitive control-based filter. This paper starts with the mathematical description of voltages that can be expected in low voltage grid after which condition for grid voltage vector tracking in the synchronous reference frame is derived. Small signal model of a phase-locked loop that uses this principle is presented along with a way for parameter selection. In the next section, repetitive ripple estimator is induced and its description in continuous and discrete-time is provided along with tradeoffs that are made with the change of one presented parameter. The phase-locked loop that uses the proposed filter is compared to the one that uses moving average filter and the one without any filter in a simulation. Comparison is made on tests that include voltage sags, harmonics, DC offset, random noise, and fundamental frequency change.

This paper researches unsymmetrical voltage sag influence on torque ripple in scalar controlled (V/Hz), rotor field oriented (RFO) and direct torque controlled (DTC) drives. Electric drives performance degradation during voltage sag mainly depends on the used control algorithm. Industrial drives with all three types control methods are experimentally tested. Experiments with digital observer's application confirm the proposed solution. .

This paper analyses symmetrical and unsymmetrical voltage sag effects on the torque and speed deviation in direct torque controlled (DTC) induction motors (IMs) for adjustable speed drives (ASDs). The capability of an ASD for continuous normal operation in case of short supply disturbances is essential for high performance drives. In this paper, an updated scheme is proposed for boosting ASD performances during supply disturbances with voltage reduction. Flux weakening is an effective method to overcome the torque-decreasing problem in case of DC-link voltage diminishing. It is also shown that speed reduction is an efficient procedure to obtain the voltage sag insensitivity of an ASD, which is appropriate for the existing industrial applications. Extensive laboratory testing has been conducted to verify the performances and effectiveness of the proposed control algorithm. The suggested method requires only a modification of converter control software or operating speed change without any additional hardware components. Extended tests under various voltage sags events were carried out on a 1.5 kW laboratory drive, and the obtained results have been compared with an industrial DTC drive.