Search

To enhance the dissolution and oral bioavailability of telmisartan (TMS), a poorly water-soluble anti-hypertensive drug, a supersaturable self-microemulsifying drug delivery system (SuSMEDDS) was developed. Amorphous alkalinized TMS (AAT) was formulated into a SMEDDS, composed of Capmul® MCM (oil), Cremophor

Valsartan (VST) is a poorly water-soluble drug and a P-glycoprotein (P-gp) substrate. To enhance the dissolution and oral absorption of VST, a novel supersaturable self-microemulsifying drug delivery system (Su-SMEDDS) was formulated. Based on the previously reported Su-SMEDDS composed of Capmul

Pelubiprofen (PEL), which is a commercialized non-steroidal anti-inflammatory drug (NSAID), is associated with the risk of gastrointestinal (GI) adverse events following long-term exposure and has poor water-soluble properties. Here, a new pelubiprofen tromethamine (PEL-T) with improved solubility, permeability, GI safety, and absorption, compared to PEL, has been developed. The nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FT-IR) results confirmed that the PEL-T was well formed. The powder of PEL-T showed the presence of additional 6H protons at δ 3.66–3.61 in the 1H NMR spectrum, and shifted the sharp endothermic peaks at 129 °C in DSC, and the spectrum of distinct absorption peaks in FT-IR. In addition, compared with PEL, PEL-T showed a significantly improved solubility in various media and an increased permeability coefficient (Kp) in Caco-2 cells. Furthermore, compared to PEL oral administration, PEL-T was found to significantly reduce the damaged area in an acute gastric damage rat model. The pharmacokinetic study of the PEL-T powder showed higher maximum plasma concentration (Cmax) and area under the plasma concentration–time curve from 0 h to the last time point (AUCt) than those of the PEL powder. Taken together, our data suggest that PEL-T is a recommendable candidate with enhanced gastrointestinal safety and better absorption compared with commercial PEL.

A novel solid self-dispersing micelle (S-SDM) was developed to enhance the oral bioavailability of valsartan (VST) and to reduce the total mass of solidified supersaturable self-microemulsifying drug delivery system (S-SuSMEDDS), composed of Capmul MCM, Tween 80 (T80), Gelucire 44/14 (G44), Poloxamer 407, Florite PS-10 (FLO), and low-substituted hydroxypropyl cellulose B1 (HPC). Excluding oil component from S-SuSMEDDS, S-SDM was optimized using a Box-Behnken design with three independent variables: X1 (T80/G44, 0.63), X2 (FLO/HPC, 0.41), and X3 (solid carrier, 177.6 mg); and three response factors: Y1 (droplet size, 191.9 nm), Y2 (dissolution efficiency at 15 min, 55.0%), and Y3 (angle of repose, 32.4°). The desirability function was 0.636, showing an excellent agreement between the predicted and experimental values. With approximately 75% weight of S-SuSMEDDS, no distinct crystallinity of VST was observed in S-SDM, resulting in critical micelle concentration value of 32 μg/mL. Optimized S-SDM showed an approximate 4-fold improved dissolution (pH 1.2, 500 mL) compared with raw VST. Following oral administration in rats, optimized S-SDM improved relative bioavailability by approximately 235%, 216%, and 127% versus raw VST, Diovan® (commercial reference), and S-SuSMEDDS, respectively. Thus, optimized S-SDM could be a selectable candidate for developing water-insoluble drugs in reduced quantity.

To overcome the poor dissolution of telmisartan (TMS) at weak acidic pH, amorphous alkalinized TMS (AAT) was prepared by introducing sodium hydroxide as a selective alkalizer. AAT-containing polymeric solid dispersions were prepared by a solvent evaporation method; these solid dispersions were AAT-PEG, AAT-PVP, AAT-POL, and AAT-SOL for the polymers of PEG 6000, PVP K30, Poloxamer 407, and Soluplus, respectively. The characteristics of the different formulations were observed by differential scanning calorimetry, powder X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. To compare the supersaturation behavior, a dissolution test was performed at 37 ± 0.5 °C either in 900 ml (plain condition) or 500 ml (limited condition) of pH 6.8-simulated intestinal fluid used as a medium. AAT-SOL exhibited enhanced dissolution, indicating the probability of extended supersaturation in the limited condition. AAT-SOL was further formulated into a tablet by introducing other excipients, Vivapur 105 and Croscarmellose, as a binder and superdisintegrant, respectively, using a direct compression method. The selected AAT-SOL tablet was superior to Micardis (the reference product) in the aspect of supersaturation maintenance during dissolution in the limited condition, suggesting that it is a promising candidate for practical development that can replace the commercial product in the future.

// Dong Woo Yeom 1, * , Bo Ram Chae 1, 2, * , Jin Han Kim 1 , Jun Soo Chae 1 , Dong Jun Shin 1 , Chang Hyun Kim 1 , Sung Rae Kim 1 , Ji Ho Choi 1 , Seh Hyon Song 2 , Dongho Oh 2 , Se Il Sohn 2 and Young Wook Choi 1 1 College of Pharmacy, Chung-Ang University, Seoul 06974, Republic of Korea 2 Daewon Pharm. Co., Ltd, Seoul 04994, Republic of Korea * These authors have contributed equally to this work Correspondence to: Young Wook Choi, email: ywchoi@cau.ac.kr Keywords: valsartan; SMEDDS; solid carrier; tablet; optimization Received: June 27, 2017 Accepted: September 20, 2017 Published: October 09, 2017 ABSTRACT In order to improve the dissolution and oral bioavailability of valsartan (VST), and reduce the required volume for treatment, we previously formulated a supersaturable self-microemulsifying drug delivery system (SuSMEDDS) composed of VST (80 mg), Capmul ® MCM (13.2 mg), Tween ® 80 (59.2 mg), Transcutol ® P (59.2 mg), and Poloxamer 407 (13.2 mg). In the present study, by using Florite ® PS-10 (119.1 mg) and Vivapur ® 105 (105.6 mg) as solid carriers, VST-loaded solidified SuSMEDDS (S-SuSMEDDS) granules were successfully developed, which possessed good flow properties and rapid drug dissolution. By introducing croscarmellose sodium (31 mg) as a superdisintegrant, S-SuSMEDDS tablets were also successfully formulated, which showed fast disintegration and high dissolution efficiency. Preparation of granules and tablets was successfully optimized using D-optimal mixture design and 3-level factorial design, respectively, resulting in percentage prediction errors of

To improve the dissolution and oral bioavailability of valsartan (VST), we previously formulated a supersaturable self-microemulsifying drug delivery system (SuSMED) composed of Capmul&reg, MCM (oil), Tween&reg, 80 (surfactant), Transcutol&reg, P (cosurfactant), and Poloxamer 407 (precipitation inhibitor) but encountered a stability problem (Transcutol&reg, P-induced weight loss in storage) after solidification. In the present study, replacing Transcutol&reg, P with Gelucire&reg, 44/14 resulted in a novel SuSMED formulation, wherein the total amount of surfactant/cosurfactant was less than that of the previous formulation. Solidified SuSMED (S-SuSMED) granules were prepared by blending VST-containing SuSMED with selective solid carriers, L-HPC and Florite&reg, PS-10, wherein VST existed in an amorphous state. S-SuSMED tablets fabricated by direct compression with additional excipients were sufficiently stable in terms of drug content and impurity changes after 6 months of storage at accelerated conditions (40 &plusmn, 2 &deg, C and 75 &plusmn, 5% relative humidity). Consequently, enhanced dissolution was obtained (pH 1.2, 2 h): 6-fold for S-SuSMED granules against raw VST, 2.3-fold for S-SuSMED tablets against Diovan&reg, (reference tablet). S-SuSMED tablets increased oral bioavailability in rats (10 mg/kg VST dose): approximately 177&ndash, 198% versus raw VST and Diovan&reg, Therefore, VST-loaded S-SuSMED formulations might be good candidates for practical development in the pharmaceutical industry.

To improve the dissolution behavior of telmisartan (TMS), a poorly water-soluble angiotensin II receptor blocker, TMS-phospholipid complex (TPC) was prepared by solvent evaporation method and characterized by differential scanning calorimetry and powder X-ray diffractometry. The crystalline structure of TMS was transited into an amorphous state by TPC formation. The equilibrium solubility of TPC (1.3–6.1 mg/mL) in various vehicles was about 100 times higher than that of TMS (0.009–0.058 mg/mL). TPC-loaded self-microemulsifying drug delivery system (SMEDDS) formulation was optimized using the D-optimal mixture design with the composition of 14% Capryol 90 (oil; X1), 59.9% tween 80 (surfactant; X2), and 26.1% tetraglycol (cosurfactant; X3) as independent variables, which resulted in a droplet size of 22.17 nm (Y1), TMS solubilization of 4.06 mg/mL (Y2), and 99.4% drug release in 15 min (Y3) as response factors. The desirability function value was 0.854, indicating the reliability and accuracy of optimization; in addition, good agreement was found between the model prediction and experimental values of Y1, Y2, and Y3. Dissolution of raw TMS was poor and pH-dependent, where it had extremely low dissolution (< 1% for 2 h) in water, pH 4, and pH 6.8 media; however, it showed fast and high dissolution (> 90% in 5 min) in pH 1.2 medium. In contrast, the dissolution of the optimized TPC-loaded SMEDDS was pH-independent and reached over 90% within 5 min in all the media tested. Thus, we suggested that phospholipid complex formation and SMEDDS formulation using the experimental design method might be a promising approach to enhance the dissolution of poorly soluble drugs.

Dong Woo Yeom,1,* Bo Ram Chae,2,* Ho Yong Son,1 Jin Han Kim,1 Jun Soo Chae,1 Seh Hyon Song,2 Dongho Oh,2 Young Wook Choi1 1College of Pharmacy, Chung-Ang University, Seoul, 2Daewon Pharm. Co., Ltd, Seoul, Republic of Korea *These authors contributed equally to this work Abstract: A novel, supersaturable self-microemulsifying drug delivery system (S-SMEDDS) was successfully formulated to enhance the dissolution and oral absorption of valsartan (VST), a poorly water-soluble drug, while reducing the total quantity for administration. Poloxamer 407 is a selectable, supersaturating agent for VST-containing SMEDDS composed of 10% Capmul® MCM, 45% Tween® 20, and 45% Transcutol® P. The amounts of SMEDDS and Poloxamer 407 were chosen as formulation variables for a 3-level factorial design. Further optimization was established by weighting different levels of importance on response variables for dissolution and total quantity, resulting in an optimal S-SMEDDS in large quantity (S-SMEDDS_LQ; 352 mg in total) and S-SMEDDS in reduced quantity (S-SMEDDS_RQ; 144.6 mg in total). Good agreement was observed between predicted and experimental values for response variables. Consequently, compared with VST powder or suspension and SMEDDS, both S-SMEDDS_LQ and S-SMEDDS_RQ showed excellent in vitro dissolution and in vivo oral bioavailability in rats. The magnitude of dissolution and absorption-enhancing capacities using quantity-based comparisons was in the order S-SMEDDS_RQ > S-SMEDDS_LQ > SMEDDS > VST powder or suspension. Thus, we concluded that, in terms of developing an effective SMEDDS preparation with minimal total quantity, S-SMEDDS_RQ is a promising candidate. Keywords: valsartan, SMEDDS, supersaturation, factorial design, optimization, bio­availability&nbsp

In order to characterize the in situ intestinal permeability and in vivo oral bioavailability of celecoxib (CXB), a poorly water-soluble cyclooxygenase (COX)-2 inhibitor, various formulations including the self-emulsifying drug delivery system (SEDDS) and supersaturating SEDDS (S-SEDDS) were compared. The S-SEDDS formulation was obtained by adding Soluplus as a precipitation inhibitor to SEDDS, composed of Capryol 90 as oil, Tween 20 as surfactant, and Tetraglycol as cosurfactant (1:4.5:4.5 in volume ratio). An in situ single pass intestinal perfusion study in rats was performed with CXB-dissolved solutions at a concentration of 40 μg/mL. The effective permeability (Peff) of CXB in the control solution (2.5 v/v% Tween 20-containing PBS) was 6.39 × 10−5 cm/s. The Peff value was significantly increased (P

To improve the dissolution and oral bioavailability (BA) of atorvastatin calcium (ATV), we previously introduced an optimized self-microemulsifying drug delivery system (SMEDDS) using Capmul(®) MCM (oil), Tween(®) 20 (surfactant), and tetraglycol (cosurfactant). In this study, various solid carriers were employed to develop a solidified SMEDDS (S-SMEDDS): mannitol (M) and lactose (L) as water-soluble carriers, and Sylysia(®) 350 (S) and Aerosil(®) 200 (A) as water-insoluble carriers. Maximum solidifying capacities (SCmax) of water-insoluble carriers were significantly greater than those of water-soluble carriers were. The resultant powders were free flowing with an angle of repose