Search

Layer‐by‐layer (LbL) deposition of active layers in organic solar cells (OSCs) offers immense potential for optimizing performance through precise tailoring of each layer. However, achieving high‐performance LbL OSCs with distinct solid additives in each layer remains challenging. In this study, we explore a novel approach that strategically incorporates different solid additives into specific layers of LbL devices. To this end, we introduce FeCl3 into the lower donor (D18) layer as a p‐type dopant to enhance hole concentration and mobility. Concurrently, we incorporate the wide‐band gap conjugated polymer poly(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl) (PFO) into the upper acceptor (L8‐BO) layer to improve the morphology and prolong exciton lifetime. Unlike previous studies, our approach combines these two strategies to achieve higher and more balanced electron and hole mobility without affecting device open‐circuit voltage, while also suppressing charge recombination. Consequently, the power conversion efficiency (PCE) of the D18+FeCl3/L8‐BO device increases to 18.12 %, while the D18/L8‐BO+PFO device attains a PCE of 18.79 %. These values represent substantial improvements over the control device′s PCE of 17.59 %. Notably, when both FeCl3 and PFO are incorporated, the D18+FeCl3/L8‐BO+PFO device achieves a remarkable PCE of 19.17 %. In summary, our research results demonstrate the effectiveness of the layered solid additive strategy in improving OSC performance. [ABSTRACT FROM AUTHOR]

The side‐chain has a significant influence on the optical properties and aggregation behaviors of the organic small molecule acceptors, which becomes an important strategy to optimize the photovoltaic performance of organic solar cells. In this work, we designed and synthesized three brand‐new nonfused ring electron acceptors (NFREAs) OC4‐4Cl‐Ph, OC4‐4Cl‐Th, and OC4‐4Cl‐C8 with hexylbenzene, hexylthiophene, and octyl side chains on the π‐bridge units. Compared with OC4‐4Cl‐Ph and OC4‐4Cl‐Th, OC4‐4Cl‐C8 with linear alkyl side chain has more red‐shift absorption, which is conducive to obtaining higher short‐circuit current density. Additionally, the OC4‐4Cl‐C8 film exhibits a longer exciton diffusion distance, and the D18:OC4‐4Cl‐C8 blend film displays faster hole transfer, weaker bimolecular recombination, and more efficient exciton transport. Furthermore, The D18:OC4‐4Cl‐C8 blend films may effectively form interpenetrating networks that resemble nanofibrils, which can facilitate exciton dissociation and charge transport. Finally, OC4‐4Cl‐C8‐based devices can be created a marvellously power conversion efficiency (PCE) of 16.56%, which is much higher than OC4‐4Cl‐Ph (12.29%)‐ and OC4‐4Cl‐Th‐based (11.00%) ones, being the highest PCE among the NFREA based binary devices. All in all, we have validated that side‐chain engineering is an efficient way to achieve high‐performance NFREAs. [ABSTRACT FROM AUTHOR]

The ternary strategy has proven to be an effective method for improving the efficiency of organic solar cells (OSCs). However, designing and selecting the third component still pose challenges. In this study, this issue is addressed by focusing on the PBDB‐T:Y18‐F binary system and introducing a new, strong luminescent, asymmetric small‐molecule acceptor (SMA) called L8‐CBIC‐Cl, which shares a similar skeleton with Y18‐F. The similarity in molecular framework facilitates good compatibility between the two acceptors, resulting in the formation of an alloy‐like acceptor phase. Furthermore, the norbornenyl‐modified end group in L8‐CBIC‐Cl contributes to its strong luminescent properties, which in turn leads to a low non‐radiative energy loss and a high open‐circuit voltage. Consequently, the PBDB‐T:L8‐CBIC‐Cl:Y18‐F based ternary devices realize a high power conversion efficiency (PCE) up to 17.01%, which is higher than PBDB‐T:Y18‐F device (14.49%). Importantly, L8‐CBIC‐Cl exhibits a good universality as a guest acceptor in other three binary systems (D18:Y6, D18:BTP‐eC9‐4F, and D18:L8‐BO). The D18:L8‐BO:L8‐CBIC‐Cl device shows an impressive efficiency of 19%. The work demonstrates that employing SMA with a high PLQY and better miscibility with host acceptor as the third component has a great potential for developing high‐efficiency ternary OSCs. [ABSTRACT FROM AUTHOR]

Utilizing intermolecular hydrogen‐bonding interactions stands for an effective approach in advancing the efficiency and stability of small‐molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2‐b]quinoxalin‐11‐one (Qox) as the electron‐deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox‐based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond‐assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem‐dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen‐bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor‐acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen‐bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs. [ABSTRACT FROM AUTHOR]