Search

Enzymatically-active polyelectrolyte multilayers containing n layers of phosphatase (AP n -PEM) induce the formation of supported biocatalytic supramolecular hydrogels when brought in contact with the precursor tripeptide Fmoc-FFpY (Fmoc = N-fluorenylmethyloxycarbonyl; F = Phenylalanine; Y = Tyrosine; p = phosphate group). AP n -PEM triggers the spatially-localized hydrogelation reaching 2, 17 and 350 µm of thickness for n = 1, 2 and 3, respectively. As observed by cryo scanning electron microscopy, a dense nanofibrous network underpinning the hydrogel shows parallelly orientated Fmoc-FFY peptide-based fibrils, perpendicular to the substrate. For the gel generated by the AP 3 -PEM, fluorescence confocal microscopy images show that during the peptide self-assembly, some enzymes are distributed in the hydrogel, preferentially located in few dozens of micrometers above the substrate. In addition, a self-assembly growth rate of 5 µm min -1 is determined when the hydrogelation starts. Through transmission electron microscopy immuno-labelling experiments on self-assemblies generated in solution, we observe that AP are decorating the Fmoc-FFY nanofibers. It is observed both a long-term stability and a higher biocatalytic activity of the so AP-encapsulated hydrogel compared to the bare AP n -PEM. This bioactivity can be tuned by the number n in batch and under continuous flow conditions. To illustrate the versatility of this enzyme-supported strategy, multi-catalytic transformations in continuous flow conditions have been successfully carried out using supported supramolecular hydrogel., (© 2024 Wiley‐VCH GmbH.)

Enzymes/Nanoparticles (NPs) bioconjugates are massively used nowadays to develop thin films for optical and electrochemical biosensors. Nevertheless, their full characterization as a thin coating onto electrodes remains little discussed, in particular the influence of NPs size and enzyme/NPs ratio used in the electrodeposition solution. In this study, GOx (160 kDa) and HRP (44 kDa) were used in association with tannic acid capped gold NPs (a series with sizes from 7 to 40 nm) to electrodeposit biosensor coatings, sensitive towards glucose and H 2 O 2 , respectively. The electrodeposition process was based on a mussel-inspired electro-crosslinking between gallol moieties of tannic acid (at the surface of NPs) and amine moieties of the enzymes. On one hand, the sensitivity of the GOx/NPs coatings depends strongly on the NP size and the enzyme/NPs molar ratio of the electrodeposition solution. An optimal sensitivity was obtained by electrodeposition of 11 nm NPs at a GOx/NPs molar ratio close to the theoretical value of the enzyme monolayer. On the other hand, a modest influence of the NPs size was found on the sensitivity in the case of the electrodeposited HRP/NPs coatings, reaching a plateau at the HRP/NPs molar ratio close to the value of the theoretical enzyme monolayer. In both cases, the enzyme/NPs molar ratio played a role in the sensitivity. To fully understand the parameters driving the biosensor sensitivity, a comprehensive evaluation of the colloidal state of the bioconjugates is proposed here.

Tumor cells subvert immune surveillance by harnessing signals from immune checkpoints to acquire immune resistance. The protein PD-L1 is an important component in this process, and inhibition of PD-L1 elicits durable anti-tumor responses in a broad spectrum of cancers. However, immune checkpoint inhibition that target known pathways is not universally effective. A better understanding of the genetic repertoire underlying these processes is necessary to expand our knowledge in tumor immunity and to facilitate identification of alternative targets. Here, we present a CRISPR/Cas9 screen in human cancer cells to identify genes that confer tumors with the ability to evade the cytotoxic effects of the immune system. We show that the transcriptional regulator MLLT6 (AF17) is required for efficient PD-L1 protein expression and cell surface presentation in cancer cells. MLLT6 depletion alleviates suppression of CD8 + cytotoxic T cell-mediated cytolysis. Furthermore, cancer cells lacking MLLT6 exhibit impaired STAT1 signaling and are insensitive to interferon-γ-induced stimulation of IDO1, GBP5, CD74, and MHC class II genes. Collectively, our findings establish MLLT6 as a regulator of oncogenic and interferon-γ-associated immune resistance., (© 2020 The Authors. Published under the terms of the CC BY NC ND 4.0 license.)

Autocatalysis and self-assembly are key processes in developmental biology and are involved in the emergence of life. In the last decade both of these features were extensively investigated by chemists with the final goal to design synthetic living systems. Herein, we describe the autonomous growth of a self-assembled soft material, that is, a supramolecular hydrogel, able to sustain its own formation through an autocatalytic mechanism that is not based on any template effect and emerges from a peptide (hydrogelator) self-assembly. A domino sequence of events starts from an enzymatically triggered peptide generation followed by self-assembly into catalytic nanofibers that induce and amplify their production over time, resulting in a 3D hydrogel network. A cascade is initiated by traces (10 -18  m) of a trigger enzyme, which can be localized allowing for a spatial resolution of this autocatalytic buildup of hydrogel growth, an essential condition on the route towards further cell-mimic designs., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Inspired by biology, one current goal in supramolecular chemistry is to control the emergence of new functionalities arising from the self-assembly of molecules. In particular, some peptides can self-assemble and generate exceptionally catalytically active fibrous networks able to underpin hydrogels. Unfortunately, the mechanical fragility of these materials is incompatible with process developments, relaying this exciting field to academic curiosity. Here, we show that this drawback can be circumvented by enzyme-assisted self-assembly of peptides initiated at the walls of a supporting porous material. We applied this strategy to grow an esterase-like catalytically active supramolecular hydrogel (CASH) in an open-cell polymer foam, filling the whole interior space. Our supported CASH material is highly efficient towards inactivated esters and enables the kinetic resolution of racemates. This hybrid material is robust enough to be used in continuous flow reactors, and is reusable and stable over months., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Spatial localization of biocatalysts, such as enzymes, has recently proven to be an effective process to direct supramolecular self-assemblies in a spatiotemporal way. In this work, silica nanoparticles (NPs) functionalized covalently by alkaline phosphatase (NPs@AP) induce the localized growth of self-assembled peptide nanofibers from NPs by dephosphorylation of Fmoc-FF p Y peptides (Fmoc: fluorenylmethyloxycarbonyl; F: phenylalanine; Y: tyrosine; p : phosphate group). The fibrillary nanoarchitecture around NPs@AP underpins a homogeneous hydrogel, which unexpectedly undergoes a macroscopic shape change over time. This macroscopic change is due to a phase separation leading to a dense phase (in NPs and nanofibers) in the center of the vial and surrounded by a dilute one, which still contains NPs and peptide self-assemblies. We thus hypothesize that the phase separation is not a syneresis process. Such a change is only observed when the enzymes are localized on the NPs. The dense phase contracts with time until reaching a constant volume after several days. For a given phosphorylated peptide concentration, the dense phase contracts faster when the NPs@AP concentration is increased. For a given NPs@AP concentration, it condenses faster when the peptide concentration increases. We hypothesize that the appearance of a dense phase is not only due to attractive interactions between NPs@AP but also to the strong interactions of self-assembled peptide nanofibers with the enzymes, covalently fixed on the NPs.

Controlling how, when and where a self-assembly process occurs is essential for the design of the next generation of smart materials. Along this route, enzyme-assisted self-assembly is a powerful tool developed during the last decade. Here we introduce another strategy allowing for spatiotemporal control over peptide self-assemblies. We use a Fmoc-peptide precursor in dynamic equilibrium with its low molecular weight hydrogelator (LMWH) through a reversible disulfide bond. In the absence of proteins, no self-assembly of the hydrogelator is observed. In the presence of proteins, their interactions with the precursor initiate a self-assembly process of the hydrogelator around them. This self-assembly displaces the equilibrium between precursor and LMWH according to Le Chatelier's principle, producing new hydrogelators available to pursue the self-assembly growth. One thus establishes a self-sustaining cycle fuelled by the self-assembly itself until full consumption of the LMWH. For proteins in solutions this process can lead to a supramolecular hydrogel whereas for proteins deposited on a surface, the gel growth is initiated exclusively from the surface.

Dispersing hydrophobin HFBII under air saturated with perfluorohexane gas limits HFBII aggregation to nanometer-sizes. Critical basic findings include an unusual co-adsorption effect caused by the fluorocarbon gas, a strong acceleration of HFBII adsorption at the air/water interface, the incorporation of perfluorohexane into the interfacial film, the suppression of the fluid-to-solid 2D phase transition exhibited by HFBII monolayers under air, and a drastic change in film elasticity of both Gibbs and Langmuir films. As a result, perfluorohexane allows the formation of homogenous populations of spherical, narrowly dispersed, exceptionally stable, and echogenic microbubbles., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In the present paper we describe a phase transfer of aqueous synthesized gold nanoparticles (AuNPs) from water to toluene using secondary amines: dioctylamine, didodecylamine, and dioctadecylamine. The effect of the hydrocarbon chain length and amount of amines on the transfer efficiency were investigated in the case of nanoparticles (NPs) with three different sizes: 5, 9, and 13 nm. Aqueous colloids were precisely characterized before the transfer process using UV-vis spectroscopy, dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM). Nanoparticles were next transferred to toluene and characterized using UV-vis and DLS techniques. It was found that dioctadecylamine provides the most effective transfer of nanoparticles. No time-dependent changes in the NP size were observed after 12 days, showing that the dioctadecylamine-stabilized nanoparticles dispersed in toluene were stable. This indicates that long hydrocarbon chains of dioctadecylamine exhibit sufficiently hydrophobic properties of nanoparticles and consequently their good dispersibility in nonpolar solvent.

Silver nanoparticles were synthesized in linear and branched polyelectrolyte matrices using different reductants and distinct synthesis conditions. The effect of the host hydrolyzed linear polyacrylamide and star-like copolymers dextran-graft-polyacrylamide of various compactness, the nature of the reductant, and temperature were studied on in situ synthesis of silver sols. The related nanosystems were analyzed by high-resolution transmission electron microscopy and UV-vis absorption spectrophotometry. It was established that the internal structure of the polymer matrix as well as the nature of the reductant determines the process of the silver nanoparticle formation. Specifically, the branched polymer matrices were much more efficient than the linear ones for stable nanosystem preparation.

New membrane-protein based electrodes were prepared incorporating cytochrome bo(3) from E. coli and gold nanoparticles. Direct electron transfer between the electrode and the immobilized enzymes was achieved, resulting in an electrocatalytic activity in presence of O(2). The size of the gold nanoparticles was shown to be important and smaller particles were shown to reduce the overpotential of the process.

Size-selective organization of ~2 nm dodecanethiol stabilized gold nanoparticles (AuNPs) into periodic 1D arrays by using the surface topographical features of a soft template is described. The template consists of micrometer length nanotapes organized into nanosheets with periodic valleys running along their length and is generated by the hierarchical self-assembly of a diamide molecule (BHPB) in cyclohexane. The AuNP ordering achieved simply by mixing the preformed template with the readily available ~2 nm dodecanethiol stabilized AuNPs is comparable to those obtained using programmable DNA and functional block copolymers. The observed periodicity of the AuNP arrays provided valuable structural clues about the organization of nanotapes into nanosheets. Self-assembling BHPB molecules in the presence of AuNPs by heating and cooling the two components led to a comparatively disordered organization because the template structure was changed under these conditions. Moreover, the template could not order larger AuNPs (~5 nm) into a similar 1D array, owing to the steric restriction imposed by the dimension of the valleys on the template. Interestingly, this geometric constraint led to AuNP size sorting when a polydisperse sample (2.5 ± 0.9 nm) was used for organization, with AuNPs attached to the template edges being larger (≥2.2 ± 0.9 nm) than those associated to the inner valleys (1.6 ± 0.8 nm). This is a unique example of size-sorting induced by the surface topographical features of a soft template.

Polyelectrolyte "complexes" have been studied for almost a century and find more and more applications in cosmetics and DNA transfection. Most of the available studies focused on the thermodynamic aspects of the "complex" formation, mainly to determine phase diagrams and the influence of diverse physicochemical aspects on the formation of "complexes", but conversely less effort has been given to the kinetics of such processes. We describe herein the "complexation" kinetics of a short linear sodium polyphosphate (PSP) with poly(allylamine hydrochloride) (PAH) in the presence of 10 mM, 0.15 M and 1 M NaCl. We find, by using a combination of physicochemical techniques, that mixtures containing a 1 to 1 molar ratio of phosphate and amino groups allow the formation of "complexes" having a few 100 nm in diameter which progressively grow to particles up to 1.5 microns in hydrodynamic diameter, the growth process being accompanied by some progressive sedimentation. During this slow aggregation kinetics, the polyelectrolytes undergo a release of counterions and the zeta potential changes from a positive value to a negative one of -20 mV which is close to the zeta potential of (PSP-PAH)(n) films deposited under identical physicochemical conditions. Even though the complexes have a negative electrophoretic mobility, they contain an equimolar amount of amino and phosphate groups. This allows us to make some assumption about the structure of such "complexes" and to compare them with other published structures. We will also compare them with the aggregates found during the "layer-by-layer" deposition of the same species under the same conditions.

The electrochemical behavior of three proteins fragments from the respiratory chain of the extremophilic bacterium Thermus thermophilus , namely, cytochrome c(1) (Cyt-c(1)), cytochrome c(552) (Cyt-c(552)), and Cu(A), immobilized on three-dimensional gold nanoparticles electrodes was investigated by cyclic voltammetry. The gold nanoparticles were modified by either dithiobissuccinimidyl propionate (DTSP) or a mixed self-assembled monolayer of 6-mercaptohexan-1-ol and hexanethiol, depending on the surface of the protein. High surface coverages with enzymes and good electron transfer rates were achieved in the case of Cyt-c(1) immobilized on DTSP-modified gold nanoparticles and Cyt-c(552) or Cu(A) immobilized on mixed SAMs-modified gold nanoparticles. Interestingly, high surface coverages with Cu(A) were also observed on DTSP-modified gold nanoparticles, but a slower electron transfer rate was determined in this case. The gold nanoparticle/protein assemblies were characterized by surface-enhanced IR spectroscopy and transmission electron microscopy.

Here we investigate the supramolecular polymerizations of two lipophilic guanosine derivatives in chloroform by light scattering technique and TEM experiments. The obtained data reveal the presence of several levels of organization due to the hierarchical self-assembly of the guanosine units in ribbons that in turn aggregate in fibrillar or lamellar soft structures. The elucidation of these structures furnishes an explanation to the physical behaviour of guanosine units which display organogelator properties.

To investigate the management of patients with community-acquired pneumonia (CAP) treated in hospital in Sweden, a multicentre retrospective cohort study was performed with medical record review of 982 patients (mean age 63 y) at 17 departments of infectious diseases at hospitals in Sweden. Information on antimicrobial therapy, demographic characteristics, comorbid conditions, physical examination findings, and laboratory and microbiological test results were recorded. Outcome measures were in-hospital mortality and length of hospital stay (LOS). Cultures were obtained from blood in 80% and from sputum in 22% of the patients. A microbiological aetiology was determined for 23% of the patients, with Streptococcus pneumoniae as the dominating agent (9%). The initial antibiotic treatment was mostly given intravenously (78%). Penicillin (50%) or a cephalosporin (30%) was the most common choice. Both of these drugs were usually given as a single agent. The overall mortality was 3.5% and the mean LOS was 6.4 d. Thus, the outcome was favourable despite the empirical antibiotic treatment having a narrow spectrum compared with the broader approach recommended in most recent guidelines on the management of CAP. These findings suggest that a majority of patients who are hospitalized with moderately severe pneumonia can be treated initially with penicillin alone.

We evaluated the differential effect of platelet count in platelet-rich plasma (PRP) on the level of ex vivo inhibition of platelet aggregation provided by abciximab, eptifibatide, and tirofiban as part of a randomized, comparative trial of these agents on platelet function in patients with unstable angina pectoris undergoing percutaneous coronary intervention. Platelet count <350 K/microL in PRP reduced measured platelet inhibition by abciximab, but not eptifibatide nor tirofiban. This observation suggests the need for standardized, uniform platelet counts in PRP during future comparisons of the degree of platelet inhibition by these agents.

Townes-Brocks syndrome (TBS) is an autosomal dominantly inherited malformation syndrome characterized by anal, renal, limb, and ear anomalies. Recently, we showed that mutations in the putative zinc finger transcription factor gene SALL1 cause TBS. To determine the spectrum of SALL1 mutations and to investigate the genotype-phenotype correlations in TBS, we examined 23 additional families with TBS or similar phenotypes for SALL1 mutations. In 9 of these families mutations were identified. None of the mutations has previously been described. Two of these mutations are nonsense mutations, one of which occurred in three unrelated families. Five of the mutations are short deletions. All of the mutations are located 5' of the first double zinc finger (DZF) encoding region and are therefore predicted to result in putative prematurely terminated proteins lacking all DZF domains. This suggests that only SALL1 mutations that remove the DZF domains result in TBS. We also present evidence that in rare cases SALL1 mutations can lead to phenotypes similar to Goldenhar syndrome. However, phenotypic differences in TBS do not seem to depend on the site of mutation.

Morphogenesis of avian conjunctival papillae follows a predictable temporal and spatial pattern and is in some manner directly related to the introduction of the underlying scleral ossicles. We have been able, using Scanning Electron Microscopy (SEM), to correlate all of Murray's ('43) histological stages (1--6) of papillae development, with changes in elevation and morphology of the surface of the conjunctiva. The first indication of morphogenesis is the formation of "papillae primordia." The centers of these primordia exhibit decreased intercellular contact, and become elevated as radially symmetrical humps whose surfaces are composed of rounded cells with numerous microvillar projections. As the papillae become asymmetrical and elongate, cells near the tip of the papillae enlarge and develop microridges. During regression of the papillae, single clusters of cells appear to become lost from the surfaces of the papillae into the surrounding fluid. In contrast to normal chick embryos, those homozygous for papillae and underlying scleral ossicles (Palmoski and Goetinck, '70). SEM of the mutant conjunctival surface indicates that these papillae do not exhibit all of Murray's ('43) histological stages and are morphologically abnormal. Data from the present SEM study of the normal and scaleless conjunctiva are discussed in relation to those data of other investigators, and we suggest that Stage 4 in papillae development is critical to scleral ossicle formation.