Search

Future wireless networks need to support massive machine type communication (mMTC) where a massive number of devices accesses the network and massive MIMO is a promising enabling technology. Massive access schemes have been studied for co-located massive MIMO arrays. In this paper, we investigate the activity detection in grant-free random access for mMTC in cell-free massive MIMO networks using distributed arrays. Each active device transmits a non-orthogonal pilot sequence to the access points (APs) and the APs send the received signals to a central processing unit (CPU) for joint activity detection. The maximum likelihood device activity detection problem is formulated and algorithms for activity detection in cell-free massive MIMO are provided to solve it. The simulation results show that the macro diversity gain provided by the cell-free architecture improves the activity detection performance compared to co-located architecture when the coverage area is large. [ABSTRACT FROM AUTHOR]

Cell-free massive multiple-input-multiple-output (mMIMO) is an emerging technology for beyond 5G with its promising features such as higher spectral efficiency and superior spatial diversity as compared to conventional multiple-input-multiple-output (MIMO) technology. The main working principle of cell-free mMIMO is that many distributed access points (APs) cooperate simultaneously to serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture with a sequential fronthaul between the APs. A novel uplink sequential processing algorithm is developed, which is proved to be optimal in both the maximum spectral efficiency (SE) and the minimum mean square error (MSE) sense. A detailed quantitative analysis of the fronthaul requirement or signaling of the proposed algorithm and its comparison with competing sub-optimal algorithms is provided. Key conclusions and implications are summarized in the form of corollaries. Based on the analytical and numerical simulation results, we conclude that the proposed scheme can significantly reduce the fronthaul signaling, without compromising the communication performance. [ABSTRACT FROM AUTHOR]

Standard cell-free (CF) massive multiple-input-multiple-output (mMIMO) systems is a promising technology to cover the demands for higher data rates in fifth-generation (5G) networks and beyond. These systems assume a large number of distributed access points (APs) using joint coherent transmission to communicate with the users. However, CF mMIMO systems present an increasing computational complexity as the number of users increases. Scalable cell-free CF (SCF) systems have been proposed to face this challenge. Given that the cost-efficient deployment of such large networks requires low-cost transceivers, which are prone to unavoidable hardware imperfections, realistic evaluations of SCF mMIMO systems should take them into account before implementation. Hence, in this work, we focus on the impact of hardware impairments (HWIs) on the SCF mMIMO systems through a general model accounting for both additive and multiplicative impairments. Notably, there is no other work in the literature studying the impact of phase noise (PN) in the local oscillators (LOs) of CF mMIMO systems or in general the impact of any HWIs in SCF mMIMO systems. In particular, we derive upper and lower bounds on the uplink capacity accounting for HWIs. Moreover, we obtain the optimal hardware-aware (HA) partial minimum mean-squared error (PMMSE) combiner. Especially, the lower bound is derived in closed-form using the theory of deterministic equivalents (DEs). Among the interesting findings, we observe that separate LOs (SLOs) outperform a common LO (CLO), and the additive transmit distortion degrades more the performance than the additive receive distortion. [ABSTRACT FROM AUTHOR]

In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the fundamental problem of selecting the optimal hardware quality in the Massive MIMO space. In particular, we examine the optimal HWI and ADC bit allocation per BS antenna to maximize the SE. The results show that in co-located arrays with low channel gain variations across antennas, equal ADC bit allocation is optimal. In contrast, cell-free Massive MIMO systems benefit the most from optimizing the ADC bit allocation achieving improvements in the order of 2 [bit-per-channel-use] per user equipment when using regularized zero-forcing (RZF). In addition, when including the impact of power consumption in cell-free Massive MIMO with RZF, allocating low values of mixed ADC bit resolutions across the BS antennas can increase the energy efficiency up to 30% compared to equal ADC bit allocation. [ABSTRACT FROM AUTHOR]

In this paper, we investigate optimal downlink power allocation in massive multiple-input multiple-output (MIMO) networks with distributed antenna arrays (DAAs) under correlated and uncorrelated channel fading. In DAA massive MIMO, a base station (BS) consists of multiple antenna sub-arrays. Notably, the antenna sub-arrays are deployed in arbitrary locations within a DAA massive MIMO cell. Consequently, the distance-dependent large-scale propagation coefficients are different from a user to these different antenna sub-arrays, which makes power control a challenging problem. We assume that the network operates in time-division duplex mode, where each BS obtains the channel estimates via uplink pilots. Based on the channel estimates, the BSs perform maximum-ratio transmission in the downlink. We then derive a closed-form signal-to-interference-plus-noise ratio (SINR) expression, where the channels are subject to correlated fading. Based on the SINR expression, we propose a network-wide max-min power control algorithm to ensure that each user in the network receives a uniform quality of service. Numerical results demonstrate the performance advantages offered by DAA massive MIMO. For some specific scenarios, DAA massive MIMO can improve the average per-user throughput up to 55%. Furthermore, we demonstrate that channel fading covariance is an important factor in determining the performance of DAA massive MIMO. [ABSTRACT FROM AUTHOR]

In this paper, we evaluate the uplink spectral efficiency (SE) of a single-cell massive multiple-input-multiple-output (MIMO) system with distributed jammers. We define four different attack scenarios and compare their impact on the massive MIMO system as well as on a conventional single-input-multiple-output (SIMO) system. More specifically, the jammers attack the base station (BS) during both the uplink training phase and data phase. The BS uses either least squares (LS) or linear minimum mean square error (LMMSE) estimators for channel estimation and utilizes either maximum-ratio-combining (MRC) or zero-forcing (ZF) decoding vectors. We show that ZF gives higher SE than MRC but, interestingly, the performance is unaffected by the choice of the estimators. The simulation results show that the performance loss percentage of massive MIMO is less than that of the SIMO system. Moreover, we consider two types of power control algorithms: jamming-aware and jamming-ignorant. In both cases, we consider the max-min and proportional fairness criteria to increase the uplink SE of massive MIMO systems. We notice numerically that max-min fairness is not a good option because if one user is strongly affected by the jamming, it will degrade the other users’ SE as well. On the other hand, proportional fairness improves the sum SE of the system compared with the full power transmission scenario. [ABSTRACT FROM AUTHOR]

The search for physical layer technologies that can play a key role in beyond 5G systems has started. One option is reconfigurable intelligent surfaces (RISs), which can collect wireless signals from a transmitter and passively beamform them toward the receiver. The technology has exciting prospects and is quickly gaining traction in the communication community, but in the current hype we have witnessed how several myths and overstatements are spreading in the literature. In this article, we take a neutral look at the RIS technology. We first review the fundamentals and then explain specific features that can be easily misinterpreted. In particular, we debunk three myths: 1) current network technology can only control the transmitter and receiver, not the environment in between; 2) a better asymptotic array gain is achieved than with conventional beamforming; 3) the path loss is the same as with anomalous mirrors. To inspire further research, we conclude by identifying two critical questions that must be answered for RIS to become a successful technology: 1) What is a convincing use case for RIS?; 2) How can we estimate channels and control an RIS in real time? [ABSTRACT FROM AUTHOR]

Imagine a coverage area with many wireless access points that cooperate to jointly serve the users, instead of creating autonomous cells. Such a cell-free network operation can potentially resolve many of the interference issues that appear in current cellular networks. This ambition was previously called Network MIMO (multiple-input multiple-output) and has recently reappeared under the name Cell-Free Massive MIMO. The main challenge is to achieve the benefits of cell-free operation in a practically feasible way, with computational complexity and fronthaul requirements that are scalable to large networks with many users. We propose a new framework for scalable Cell-Free Massive MIMO systems by exploiting the dynamic cooperation cluster concept from the Network MIMO literature. We provide a novel algorithm for joint initial access, pilot assignment, and cluster formation that is proved to be scalable. Moreover, we adapt the standard channel estimation, precoding, and combining methods to become scalable. A new uplink and downlink duality is proved and used to heuristically design the precoding vectors on the basis of the combining vectors. Interestingly, the proposed scalable precoding and combining outperform conventional maximum ratio (MR) processing and also performs closely to the best unscalable alternatives. [ABSTRACT FROM AUTHOR]

In this paper, we consider how the uplink transmission of a spatially correlated massive multiple-input multiple-output (MIMO) system can be protected from a jamming attack. To suppress the jamming, we propose a novel framework including a new optimal linear estimator in the training phase and a bilinear equalizer in the data phase. The proposed estimator is optimal in the sense of maximizing the spectral efficiency of the legitimate system attacked by a jammer, and its implementation needs the statistical knowledge about the jammer’s channel. We derive an efficient algorithm to estimate the jamming information needed for implementation of the proposed framework. Furthermore, we demonstrate that optimized power allocation at the legitimate users can improve the performance of the proposed framework regardless of the jamming power optimization. Our proposed framework can be exploited to combat jamming in scenarios with either ideal or non-ideal hardware at the legitimate users and the jammer. Numerical results reveal that using the proposed framework, the jammer cannot dramatically affect the performance of the legitimate system. [ABSTRACT FROM AUTHOR]

Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resolution ADCs under frequency selective fading with orthogonal frequency division multiplexing (OFDM) in the perfect and imperfect receiver channel state information cases. We derive analytical expressions for the bit error rate and ergodic capacity. We show that the interfering band can be suppressed by increasing the number of antennas or the oversampling rate when a zero-forcing receiver is employed. [ABSTRACT FROM AUTHOR]

Massive MIMO uses a large number of antennas to increase the spectral efficiency (SE) through spatial multiplexing of users, which requires accurate channel state information. It is often assumed that regular pilots (RP), where a fraction of the time-frequency resources is reserved for pilots, suffices to provide high SE. However, the SE is limited by the pilot overhead and pilot contamination. An alternative is superimposed pilots (SP) where all resources are used for pilots and data. This removes the pilot overhead and reduces pilot contamination by using longer pilots. However, SP suffers from data interference that reduces the SE gains. This paper proposes the Massive-MIMO Iterative Channel Estimation and Decoding (MICED) algorithm where partially decoded data is used as side-information to improve the channel estimation and increase SE. We show that users with precise data estimates can help users with poor data estimates to decode. Numerical results with QPSK modulation and LDPC codes show that the MICED algorithm increases the SE and reduces the block-error-rate with RP and SP compared to conventional methods. The MICED algorithm with SP delivers the highest SE and it is especially effective in scenarios with short coherence blocks like high mobility or high frequencies. [ABSTRACT FROM AUTHOR]

Since the seminal paper by Marzetta from 2010, Massive MIMO has changed from being a theoretical concept with an infinite number of antennas to a practical technology. The key concepts are adopted into the 5G New Radio Standard and base stations (BSs) with $M=64$ fully digital transceivers have been commercially deployed in sub-6GHz bands. The fast progress was enabled by many solid research contributions of which the vast majority assume spatially uncorrelated channels and signal processing schemes developed for single-cell operation. These assumptions make the performance analysis and optimization of Massive MIMO tractable but have three major caveats: 1) practical channels are spatially correlated; 2) large performance gains can be obtained by multicell processing, without BS cooperation; 3) the interference caused by pilot contamination creates a finite capacity limit, as $M\to \infty $. There is a thin line of papers that avoided these caveats, but the results are easily missed. Hence, this tutorial article explains the importance of considering spatial channel correlation and using signal processing schemes designed for multicell networks. We present recent results on the fundamental limits of Massive MIMO, which are not determined by pilot contamination but the ability to acquire channel statistics. These results will guide the journey towards the next level of Massive MIMO, which we call “Massive MIMO 2.0”. [ABSTRACT FROM AUTHOR]

This paper considers multi-cell massive multiple-input multiple-output systems, where the channels are spatially correlated Rician fading. The channel model is composed of a deterministic line-of-sight path and a stochastic non-line-of-sight component describing a practical spatially correlated multipath environment. We derive the statistical properties of the minimum mean squared error (MMSE), element-wise MMSE, and least-square channel estimates for this model. Using these estimates for maximum ratio combining and precoding, rigorous closed-form uplink (UL) and downlink (DL) achievable spectral efficiency (SE) expressions are derived and analyzed. The asymptotic SE behavior, when using the different channel estimators, are also analyzed. The numerical results show that the SE is higher when using the MMSE estimator than that of the other estimators, and the performance gap increases with the number of antennas. [ABSTRACT FROM AUTHOR]

In this paper, we consider device-to-device (D2D) communication that is underlaid in a multi-cell massive multiple-input multiple-output (MIMO) system and proposes a new framework for power control and pilot allocation. In this scheme, the cellular users (CUs) in each cell get orthogonal pilots which are reused with reuse factor one across cells, while all the D2D pairs share another set of orthogonal pilots. We derive a closed-form capacity lower bound for the CUs with different receive processing schemes. In addition, we derive a capacity lower bound for the D2D receivers and a closed-form approximation of it. We provide power control algorithms to maximize the minimum spectral efficiency (SE) and to maximize the product of the signal-to-interference-plus-noise ratios in the network. Different from prior works, in our proposed power control schemes, we consider joint pilot and data transmission optimization. Finally, we provide a numerical evaluation, where we compare our proposed power control schemes with the maximum transmit power case and the case of conventional multi-cell massive MIMO without D2D communication. Based on the provided results, we conclude that our proposed scheme increases the sum SE of multi-cell massive MIMO networks. [ABSTRACT FROM AUTHOR]

This paper analyzes how the distortion created by hardware impairments in a multiple-antenna base station affects the uplink spectral efficiency (SE), with a focus on massive multiple input multiple output (MIMO). This distortion is correlated across the antennas but has been often approximated as uncorrelated to facilitate (tractable) SE analysis. To determine when this approximation is accurate, basic properties of distortion correlation are first uncovered. Then, we separately analyze the distortion correlation caused by third-order non-linearities and by quantization. Finally, we study the SE numerically and show that the distortion correlation can be safely neglected in massive MIMO when there are sufficiently many users. Under independent identically distributed Rayleigh fading and equal signal-to-noise ratios (SNRs), this occurs for more than five transmitting users. Other channel models and SNR variations have only minor impact on the accuracy. We also demonstrate the importance of taking the distortion characteristics into account in the receive combining. [ABSTRACT FROM AUTHOR]

We consider transmission of system information in a cell-free massive MIMO system, when the transmitting access points do not have any channel state information and the receiving terminal has to estimate the channel based on downlink pilots. We analyze the system performance in terms of outage rate and coverage probability and use space-time block codes to increase performance. We propose a heuristic method for pilot/data power optimization that can be applied without any channel state information at the access points. We also analyze the problem of grouping the access points, which is needed when the single-antenna access points jointly transmit a space-time block code. [ABSTRACT FROM AUTHOR]

Cell-free (CF) massive multiple-input multiple-output (MIMO) is an alternative topology for future wireless networks, where a large number of single-antenna access points (APs) are distributed over the coverage area. There are no cells but all users are jointly served by the APs using network MIMO methods. Prior works have claimed that the CF massive MIMO inherits the basic properties of cellular massive MIMO, namely, channel hardening and favorable propagation. In this paper, we evaluate if one can rely on these properties when having a realistic stochastic AP deployment. Our results show that channel hardening only appears in special cases, for example, when the pathloss exponent is small. However, by using 5–10 antennas per AP, instead of one, we can substantially improve the hardening. Only spatially well-separated users will exhibit favorable propagation, but when adding more antennas and/or reducing the pathloss exponent, it becomes more likely for favorable propagation to occur. The conclusion is that we cannot rely on the channel hardening and the favorable propagation when analyzing and designing the CF massive MIMO networks, but we need to use achievable rate expressions and resource allocation schemes that work well also in the absence of these properties. Some options are reviewed in this paper. [ABSTRACT FROM AUTHOR]

The characterization of the global maximum of energy efficiency (EE) problems in wireless networks is a challenging problem due to their nonconvex nature in interference channels. The aim of this paper is to develop a new and general framework to achieve globally optimal solutions. First, the hidden monotonic structure of the most common EE maximization problems is exploited jointly with fractional programming theory to obtain globally optimal solutions with exponential complexity in the number of network links. To overcome the high complexity, we also propose a framework to compute suboptimal power control strategies with affordable complexity. This is achieved by merging fractional programming and sequential optimization. The proposed monotonic framework is used to shed light on the ultimate performance of wireless networks in terms of EE and also to benchmark the performance of the lower-complexity framework based on sequential programming. Numerical evidence is provided to show that the sequential fractional programming framework achieves global optimality in several practical communication scenarios. [ABSTRACT FROM PUBLISHER]

This paper considers the jointly optimal pilot and data power allocation in single-cell uplink massive multiple-input-multiple-output systems. Using the spectral efficiency (SE) as performance metric and setting a total energy budget per coherence interval, the power control is formulated as optimization problems for two different objective functions: the weighted minimum SE among the users and the weighted sum SE. A closed form solution for the optimal length of the pilot sequence is derived. The optimal power control policy for the former problem is found by solving a simple equation with a single variable. Utilizing the special structure arising from imperfect channel estimation, a convex reformulation is found to solve the latter problem to global optimality in polynomial time. The gain of the optimal joint power control is theoretically justified, and is proved to be large in the low-SNR regime. Simulation results also show the advantage of optimizing the power control over both pilot and data power, as compared to the cases of using full power and of only optimizing the data powers as done in previous work. [ABSTRACT FROM PUBLISHER]

5G wireless networks are expected to support new services with stringent requirements on data rates, latency and reliability. One novel feature is the ability to serve a dense crowd of devices, calling for radically new ways of accessing the network. This is the case in machine-type communications, but also in urban environments and hotspots. In those use cases, the high number of devices and the relatively short channel coherence interval do not allow per-device allocation of orthogonal pilot sequences. This article addresses the need for random access by the devices to pilot sequences used for channel estimation, and shows that Massive MIMO is a main enabler to achieve fast access with high data rates, and delay-tolerant access with different data rate levels. Three pilot access protocols along with data transmission protocols are described, fulfilling different requirements of 5G services. [ABSTRACT FROM PUBLISHER]

The problem of maximum likelihood (ML) detection in training-assisted single-input multiple-output (SIMO) systems with phase noise impairments is studied for two different scenarios, i.e., the case when the channel is deterministic and known (constant channel) and the case when the channel is stochastic and unknown (fading channel). Furthermore, two different operations with respect to the phase noise sources are considered, namely, the case of identical phase noise sources and the case of independent phase noise sources over the antennas. In all scenarios, the optimal detector is derived for a very general parameterization of the phase noise distribution. Furthermore, a high signal-to-noise-ratio (SNR) analysis is performed to show that symbol-error-rate (SER) floors appear in all cases. The SER floor in the case of identical phase noise sources (for both constant and fading channels) is independent of the number of antenna elements. In contrast, the SER floor in the case of independent phase noise sources is reduced when increasing the number of antenna elements (for both constant and fading channels). Finally, the system model is extended to multiple data channel uses and it is shown that the conclusion is valid for these setups, as well. [ABSTRACT FROM AUTHOR]

The use of large-scale antenna arrays can bring substantial improvements in energy and/or spectral efficiency to wireless systems due to the greatly improved spatial resolution and array gain. Recent works in the field of massive multiple-input multiple-output (MIMO) show that the user channels decorrelate when the number of antennas at the base stations (BSs) increases, thus strong signal gains are achievable with little interuser interference. Since these results rely on asymptotics, it is important to investigate whether the conventional system models are reasonable in this asymptotic regime. This paper considers a new system model that incorporates general transceiver hardware impairments at both the BSs (equipped with large antenna arrays) and the single-antenna user equipments (UEs). As opposed to the conventional case of ideal hardware, we show that hardware impairments create finite ceilings on the channel estimation accuracy and on the downlink/uplink capacity of each UE. Surprisingly, the capacity is mainly limited by the hardware at the UE, while the impact of impairments in the large-scale arrays vanishes asymptotically and interuser interference (in particular, pilot contamination) becomes negligible. Furthermore, we prove that the huge degrees of freedom offered by massive MIMO can be used to reduce the transmit power and/or to tolerate larger hardware impairments, which allows for the use of inexpensive and energy-efficient antenna elements. [ABSTRACT FROM PUBLISHER]

Physical transceivers have hardware impairments that create distortions which degrade the performance of communication systems. The vast majority of technical contributions in the area of relaying neglect hardware impairments and, thus, assume ideal hardware. Such approximations make sense in low-rate systems, but can lead to very misleading results when analyzing future high-rate systems. This paper quantifies the impact of hardware impairments on dual-hop relaying, for both amplify-and-forward and decode-and-forward protocols. The outage probability (OP) in these practical scenarios is a function of the effective end-to-end signal-to-noise-and-distortion ratio (SNDR). This paper derives new closed-form expressions for the exact and asymptotic OPs, accounting for hardware impairments at the source, relay, and destination. A similar analysis for the ergodic capacity is also pursued, resulting in new upper bounds. We assume that both hops are subject to independent but non-identically distributed Nakagami-m fading. This paper validates that the performance loss is small at low rates, but otherwise can be very substantial. In particular, it is proved that for high signal-to-noise ratio (SNR), the end-to-end SNDR converges to a deterministic constant, coined the SNDR ceiling, which is inversely proportional to the level of impairments. This stands in contrast to the ideal hardware case in which the end-to-end SNDR grows without bound in the high-SNR regime. Finally, we provide fundamental design guidelines for selecting hardware that satisfies the requirements of a practical relaying system. [ABSTRACT FROM AUTHOR]

The throughput of multicell systems is inherently limited by interference and the available communication resources. Coordinated resource allocation is the key to efficient performance, but the demand on backhaul signaling and computational resources grows rapidly with number of cells, terminals, and subcarriers. To handle this, we propose a novel multicell framework with dynamic cooperation clusters where each terminal is jointly served by a small set of base stations. Each base station coordinates interference to neighboring terminals only, thus limiting backhaul signalling and making the framework scalable. This framework can describe anything from interference channels to ideal joint multicell transmission. The resource allocation (i.e., precoding and scheduling) is formulated as an optimization problem (P1) with performance described by arbitrary monotonic functions of the signal-to-interference-and-noise ratios (SINRs) and arbitrary linear power constraints. Although (P1) is nonconvex and difficult to solve optimally, we are able to prove: 1) optimality of single-stream beamforming; 2) conditions for full power usage; and 3) a precoding parametrization based on a few parameters between zero and one. These optimality properties are used to propose low-complexity strategies: both a centralized scheme and a distributed version that only requires local channel knowledge and processing. We evaluate the performance on measured multicell channels and observe that the proposed strategies achieve close-to-optimal performance among centralized and distributed solutions, respectively. In addition, we show that multicell interference coordination can give substantial improvements in sum performance, but that joint transmission is very sensitive to synchronization errors and that some terminals can experience performance degradations. [ABSTRACT FROM AUTHOR]

We study downlink channel estimation in a multi-cell Massive multiple-input multiple-output (MIMO) system operating in time-division duplex. The users must know their effective channel gains to decode their received downlink data. Previous works have used the mean value as the estimate, motivated by channel hardening. However, this is associated with a performance loss in non-isotropic scattering environments. We propose two novel estimation methods that can be applied without downlink pilots. The first method is model-based and asymptotic arguments are utilized to identify a connection between the effective channel gain and the average received power during a coherence interval. The second method is data-driven and trains a neural network to identify a mapping between the available information and the effective channel gain. Both methods can be utilized for any channel distribution and precoding. For the model-aided method, we derive all expressions in closed form for the case when maximum ratio or zero-forcing precoding is used. We compare the proposed methods with the state-of-the-art using the normalized mean-squared error and spectral efficiency (SE). The results suggest that the two proposed methods provide better SE than the state-of-the-art when there is a low level of channel hardening, while the performance difference is relatively small with the uncorrelated channel model. [ABSTRACT FROM AUTHOR]

Cell-free massive multiple-input multiple-output (MIMO) provides more uniform spectral efficiency (SE) for users (UEs) than cellular technology. The main challenge to achieve the benefits of cell-free massive MIMO is to realize signal processing in a scalable way. In this paper, we consider scalable full-pilot zero-forcing (FZF), partial FZF (PFZF), protective weak PFZF (PWPFZF), and local regularized ZF (LRZF) combining by exploiting channel statistics. We derive closed-form expressions of the uplink SE for FZF, PFZF, and PWPFZF combining with large-scale fading decoding over independent Rayleigh fading channels, taking channel estimation errors and pilot contamination into account. Moreover, we investigate the impact of the number of pilot sequences, antennas per AP, and APs on the performance. Numerical results show that LRZF provides the highest SE. However, PWPFZF is preferable when the number of pilot sequences is large and the number of antennas per AP is small. The reason is that PWPFZF has lower computational complexity and the SE expression can be computed in closed-form. Furthermore, we investigate the performance of PWPFZF combining with fractional power control and the numerical results show that it improves the performance of weak UEs and realizes uniformly good service for all UEs in a scalable fashion. [ABSTRACT FROM AUTHOR]

We consider backward crosstalk in $2\times 2$ transmitters, which is caused by crosstalk from the outputs of the transmitter to the inputs or by the combination of output crosstalk and impedance mismatch. We analyze its impact via feedback networks together with third-order power amplifier non-linearities. We utilize the Bussgang decomposition to express the distorted output signals of the transmitter as a linear transformation of the input plus uncorrelated distortion. The normalized mean-square errors (NMSEs) between the distorted and desired amplified signals are expressed analytically and the optimal closed-form power back-off that minimizes the worst NMSE of the two branches is derived. In the second part of the paper, an achievable spectral efficiency (SE) is presented for the communication from this “dirty” transmitter to another single-antenna receiver. The SE-maximizing precoder is optimally found by exploiting the hardware characteristics. Furthermore, the optimal power back-off is analyzed for two sub-optimal precoders, which either do not exploit any hardware knowledge or only partial knowledge. The simulation results show that the performance of these sub-optimal precoders is close-to-optimal. We also discuss how the analysis in this paper can be extended to transmitters with an arbitrary number of antenna branches. [ABSTRACT FROM AUTHOR]

This paper studies the transmit power optimization in multi-cell Massive multiple-input multiple-output (MIMO) systems. Network-wide max-min fairness (NW-MMF) and network-wide proportional fairness (NW-PF) are two well-known power control schemes in the literature. The NW-MMF focus on maximizing the fairness among users at the cost of penalizing users with good channel conditions. On the other hand, the NW-PF focuses on maximizing the sum SE, thereby ignoring fairness, but gives some extra attention to the weakest users. However, both of these schemes suffer from a scalability issue which means that for large networks, it is highly probable that one user has a very poor channel condition, pushing the spectral efficiency (SE) of all users towards zero. To overcome the scalability issue of NW-MMF and NW-PF, we propose a novel power control scheme that is provably scalable. This scheme maximizes the geometric mean (GM) of the per-cell max-min SE. To solve this new optimization problem, we prove that it can be rewritten in a convex optimization form and then solved using standard tools. The simulation results highlight the benefits of our model which is balancing between NW-PF and NW-MMF. [ABSTRACT FROM AUTHOR]

Massive multiple-input–multiple-output (MIMO) systems can suffer from coherent intercell interference due to the phenomenon of pilot contamination. This paper investigates a two-layer decoding method that mitigates both coherent and non-coherent interference in multi-cell Massive MIMO. To this end, each base station (BS) first estimates the channels to intra-cell users using either minimum mean-squared error (MMSE) or element-wise MMSE estimation based on uplink pilots. The estimates are used for local decoding on each BS followed by a second decoding layer where the BSs cooperate to mitigate inter-cell interference. An uplink achievable spectral efficiency (SE) expression is computed for arbitrary two-layer decoding schemes. A closed form expression is then obtained for correlated Rayleigh fading, maximum-ratio combining, and the proposed large-scale fading decoding (LSFD) in the second layer. We also formulate a sum SE maximization problem with both the data power and LSFD vectors as optimization variables. Since this is an NP-hard problem, we develop a low-complexity algorithm based on the weighted MMSE approach to obtain a local optimum. The numerical results show that both data power control and LSFD improve the sum SE performance over single-layer decoding multi-cell Massive MIMO systems. [ABSTRACT FROM AUTHOR]

One of the main goals of the future wireless networks is improving the users’ quality of experience (QoE). In this paper, we consider the problem of the QoE-based resource allocation in the downlink of a massive multiple-input multiple-output heterogeneous network. The network consists of a macrocell with a number of small cells embedded in it. The small cells’ base stations (BSs) are equipped with a few antennas, while the macro BS is equipped with a massive number of antennas. We consider the two services Video and Web Browsing and design the beamforming vectors at the BSs. The objective is to maximize the aggregated mean opinion score (MOS) of the users under constraints on the BSs’ powers and the required quality of service of the users. We also consider extra constraints on the QoE of users to more strongly enforce the QoE in the beamforming design. To reduce the complexity of the optimization problem, we suggest suboptimal and computationally efficient solutions. Our results illustrate that increasing the number of antennas at the BSs and also increasing the number of small cells’ antennas in the network leads to a higher user satisfaction. [ABSTRACT FROM AUTHOR]

Massive MIMO (MM) is one of the leading technologies that can cater for very high capacity demand. However, energy consumption of MM systems needs to be load adaptive in order to cope with the significant temporal load variations (TLV) over a day. In this paper, we propose a game-theoretic model for studying load adaptive multicell massive MIMO system where each base station (BS) adapts the number of antennas to the TLV in order to maximize the downlink energy efficiency (EE). The utility function considered here is defined as the number of bits transferred per Joule of energy. In order to incorporate the TLV, the load at each BS is modeled as an $M/G/m/m$ state dependent queue under the assumption that the network is dimensioned to serve a maximum number of users at the peak load. The EE maximization problem is formulated in a game theoretic framework where the number of antennas to be used by a BS is determined through the best response iteration. This load adaptive system achieves around 24% higher EE and saves around 40% energy compared to a baseline system where the BSs always run with the fixed number of antennas that is most energy efficient at the peak load and that can be switched off when there is no traffic. [ABSTRACT FROM AUTHOR]

Recently, a structure of an optimal linear precoder for multi cell downlink systems has been described, and many other references have used simplified versions of this precoder to obtain promising performance gains. These gains have been hypothesized to stem from the additional degrees of freedom that allow for interference mitigation through interference relegation to orthogonal subspaces. However, no conclusive or rigorous understanding has yet been developed. In this paper, we build on an intuitive interference induction trade-off and the aforementioned preceding structure to propose an interference aware RZF (iaRZF) preceding scheme for multi cell downlink systems, and we analyze its rate performance. Special emphasis is placed on the induced interference mitigation mechanism of iaRZF. For example, we will verify the intuitive expectation that the precoder structure can either completely remove induced inter-cell or intra-cell interference. We state new results from large-scale random matrix theory that make it possible to give more intuitive and insightful explanations of the precoder behavior, also for cases involving imperfect channel state information (CSI). We remark especially that the interference-aware precoder makes use of all available information about interfering channels to improve performance. Even very poor CSI allows for significant sum-rate gains. Our obtained insights are then used to propose heuristic precoder parameters for arbitrary systems, whose effectiveness are shown in more involved system scenarios. Furthermore, calculation and implementation of these parameters does not require explicit inter base station cooperation. [ABSTRACT FROM PUBLISHER]

The prospects of using a Reconfigurable Intelligent Surface (RIS) to aid wireless communication systems have recently received much attention from academia and industry. Most papers make theoretical studies based on elementary models, while the prototyping of RIS-aided wireless communication and real-world field trials are scarce. In this paper, we describe a new RIS prototype consisting of 1100 controllable elements working at 5.8 GHz band. We propose an efficient algorithm for configuring the RIS over the air by exploiting the geometrical array properties and a practical receiver-RIS feedback link. In our indoor test, where the transmitter and receiver are separated by a 30 cm thick concrete wall, our RIS prototype provides a 26 dB power gain compared to the baseline case where the RIS is replaced by a copper plate. A 27 dB power gain was observed in the short-distance outdoor measurement. We also carried out long-distance measurements and successfully transmitted a 32 Mbps data stream over 500 m. A 1080p video was live-streamed and it only played smoothly when the RIS was utilized. The power consumption of the RIS is around 1 W. Our paper is vivid proof that the RIS is a very promising technology for future wireless communications. [ABSTRACT FROM AUTHOR]

This paper proposes a flexible pilot assignment method to jointly optimize the uplink and downlink data transmission in multi-cell Massive multiple input multiple output (MIMO) systems with correlated Rayleigh fading channels. By utilizing a closed-form expression of the ergodic spectral efficiency (SE) achieved with maximum ratio processing, we formulate an optimization problem for maximizing the minimum weighted sum of the uplink and downlink SEs subject to the transmit powers and pilot assignment sets. This combinatiorial optimization problem is solved by two sequential algorithms: a heuristic pilot assignment is first proposed to obtain a good pilot reuse set and the data power control is then implemented. Numerical results manifest that the proposed algorithm converges fast to a better minimum sum SE per user than the algorithms in previous works. [ABSTRACT FROM AUTHOR]

This paper investigates the performance of limited-fronthaul cell-free massive multiple-input multiple-output (MIMO) taking account the fronthaul quantization and imperfect channel acquisition. Three cases are studied, which we refer to as Estimate&Quantize, Quantize&Estimate, and Decentralized, according to where channel estimation is performed and exploited. Maximum-ratio combining (MRC), zero-forcing (ZF), and minimum mean-square error (MMSE) receivers are considered. The Max algorithm and the Bussgang decomposition are exploited to model optimum uniform quantization. Exploiting the optimal step size of the quantizer, analytical expressions for spectral and energy efficiencies are presented. Finally, an access point (AP) assignment algorithm is proposed to improve the performance of the decentralized scheme. Numerical results investigate the performance gap between limited fronthaul and perfect fronthaul cases, and demonstrate that exploiting relatively few quantization bits, the performance of limited-fronthaul cell-free massive MIMO closely approaches the perfect-fronthaul performance. [ABSTRACT FROM AUTHOR]

What will it take for drones, and the whole associated ecosystem, to take off? Arguably, infallible C&C channels for safe and autonomous flying, and high-throughput links for multi-purpose live video streaming. And indeed, meeting these aspirations may entail full cellular support, provided through 5G-and-beyond hardware and software upgrades by both mobile operators and manufacturers of these UAVs. In this article, we vouch for massive MIMO as the key building block to realize 5G-connected UAVs. Through the sheer evidence of 3GPP-compliant simulations, we demonstrate how massive MIMO can be enhanced by complementary network-based and UAV-based solutions, resulting in consistent UAV C&C support, large UAV uplink data rates, and harmonious coexistence with legacy ground users. [ABSTRACT FROM AUTHOR]

We consider a two-way half-duplex relaying system where multiple pairs of single-antenna users exchange information assisted by a multiple-antenna relay. Taking into account the practical constraint of imperfect channel knowledge, we study the achievable sum spectral efficiency (SE) of the amplify-and-forward protocol, assuming that the relay employs maximum ratio processing. We derive a closed-form expression for the sum SE for arbitrary system parameters and a large-scale approximation for the sum SE when the number of relay antennas $M$ becomes sufficiently large. In addition, we study how the transmit power reduces with $M$ to maintain a desired SE. Our results show that by using a large number of relay antennas, the transmit powers of the user, relay, and pilot symbol can be scaled down proportionally to $1/M^\alpha$ , $1/M^\beta$ , and $1/M^\gamma$ for certain combinations of $\alpha$ , $\beta$ , and $\gamma$ , respectively. This elegant power scaling law reveals a fundamental tradeoff between the transmit powers of the user/relay and pilot symbol. Finally, capitalizing on the new expressions for the sum SE, novel power allocation schemes are designed to further improve the sum SE. [ABSTRACT FROM AUTHOR]

This paper analyzes the performance of linearly precoded time division duplex based multi-user massive MIMO downlink system under joint impacts of channel non-reciprocity (NRC) and imperfect channel state information. We consider a generic and realistic NRC model that accounts for transceiver frequency-response as well as mutual coupling mismatches at both user equipment (UE) and base station (BS) sides. The analysis covers two most prominent forms of linear precoding schemes, namely, zero-forcing (ZF) and maximum-ratio transmission (MRT), and assumes that only the statistical properties of the beamformed channel are used at the UE side to decode the received signal. Under the approximation of i.i.d. Gaussian channels, closed-form analytical expressions are derived for the effective signal to interference and noise ratios (SINRs) and the corresponding capacity lower bounds. The expressions show that, in moderate to high SNR, the additional interference caused by imperfect NRC calibration can degrade the performance of both precoders significantly. Moreover, ZF is shown to be more sensitive to NRC than MRT. Numerical evaluations with practical NRC levels indicate that this performance loss in the spectral efficiency can be as high as 42% for ZF, whereas it is typically less than 13% for MRT. It is also shown that due to the NRC, the asymptotic large-antenna performance of both precoders saturate to an identical finite level. The derived analytical expressions provide useful tools and valuable technical insight, e.g., into calculating the NRC calibration requirements in BSs and UEs for any given specific performance targets in terms of effective SINR or the system capacity bound. [ABSTRACT FROM AUTHOR]

Transceiver hardware impairments (e.g., phase noise, in-phase/quadrature-phase imbalance, amplifier nonlinearities, and quantization errors) have obvious degradation effects on the performance of wireless communications. While prior works have improved our knowledge of the influence of hardware impairments of single-user multiple-input multiple-output (MIMO) systems over Rayleigh fading channels, an analysis encompassing the Rician fading channel is not yet available. In this paper, we pursue a detailed analysis of regular and large-scale (LS) MIMO systems over Rician fading channels by deriving new closed-form expressions for the achievable rate to provide several important insights for practical system design. More specifically, for regular MIMO systems with hardware impairments, there is always a finite achievable rate ceiling, which is irrespective of the transmit power and fading conditions. For LS-MIMO systems, it is interesting to find that the achievable rate loss depends on the Rician $K$- factor, which reveals that the favorable propagation in LS-MIMO systems can remove the influence of hardware impairments. However, we show that the nonideal LS-MIMO system can still achieve high spectral efficiency due to its huge degrees of freedom. [ABSTRACT FROM PUBLISHER]