Search

Infections and thrombosis remain unsolved problems for implanted cardiovascular devices, such as left ventricular assist devices. Hence, the development of surfaces with improved blood compatibility and antimicrobial properties is imperative to reduce complications after artificial heart implantation. In this work, we report a novel approach to fabricate multifunctional surfaces for left ventricular transplanted ventricular assist devices (LVADs) by immobilizing nitric oxide (NO) generation catalysts and heparin and reducing silver nanoparticles in situ. The general view, structure, and chemical compositions of the pure/modified surfaces were characterized using digital imaging, scanning electron microscope (SEM), atomic force microscope (AFM), water contact angle (WCA), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma (ICP). All of the results demonstrated that the AgNPs and heparin were successfully immobilized on the surface. The Cu ions and NO release experimental results showed that the immobilized copper ions could catalyze the production of NO from S -nitrosothiols within the biological system. Meanwhile, due to the synergistic anticoagulant effect of NO and surface-immobilized heparin, the fabricated modified surfaces exhibited antiplatelet adhesion activities and good hemocompatibility. Finally, the antimicrobial activity of the samples was evaluated by Escherichia coli and Staphylococcus aureus , and cytocompatibility was measured using human umbilical vein endothelial cells (HUVECs). The results demonstrated that silver nanoparticles (AgNPs) immobilized by surface reduction reaction did not cause any significant inhibition of cell proliferation while providing stable and effective antimicrobial properties. We envision that this simple surface modification strategy with bifunctional activities of antimicrobial and anticoagulant will find widespread use in clinically used indwelling left ventricular assist devices.

Microplastics (MPs) are ubiquitous pollutant causing severe threat to the biotic and abiotic components of the coastal ecosystem. Accumulation of MPs in the commercially important bivalves Viz. Perna viridis (green mussel) and Meretrix casta (clam) collected from four different locations of Beypore estuary, Southern India was studied. The study focused on the accumulation, characteristics, diversity indices, and human health risk assessment of MPs in the bivalves of Beypore estuary. A total of 120 bivalve samples were examined for the MPs contamination. Whole tissue digestion method using 10% KOH was employed to retrieve the MP content. The results indicate that the average abundance of MPs in Perna viridis is 2.38 ± 1.56 MPs/individual and 0.15 ± 0.09 MP/g/wet weight whereas, for Meretrix casta it is 1.35 ± 1.02 MPs/individual and 0.3 ± 0.27 MP/g/wet weight. Spearman's correlation reveals that there is no significant correlation observed between the abundance of MPs in the bivalves with their morphomertric parameters. The characteristics of MPs in the bivalves are dominated by translucent colored particles (88.95%) in the form of films (45.13%) and fibers (33.6%) having a size ranged between 300 and 1000 μm (51.13%) and composed of polyethylene (54.5%) and polypropylene (20%) polymers. The microplastic index in Meretrix casta ranged between 0.02 and 0.07 whereas for Perna viridis it ranged between 0.08 and 0.10 indicating minimal to moderate MPs contamination. The microplastics diversity integrated index ranged between 0.67 and 0.69 for Meretrix casta whereas, for Perna viridis the value ranged between 0.34 and 0.60 suggests moderate diversity of MPs derived from multiple sources. Based on polymer hazard index, the potential health risk was assessed with a hazard level ranged between II and IV suggesting significant health risk. Systematic monitoring of MPs at river basin scale along with stringent plastic waste management is required to minimize plastic pollution load into the river system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Single-atom nanozymes (SAzymes) as a class of highly active nanozymes with the advantages of high atom utilization, high catalytic activity and stability have attracted great attention. In this work, Fe-N-C SAzymes with exceptional oxidase (OXD)-like activity were achieved utilizing polyvinylpyrrolidone (PVP) as a template. The Fe-N-C SAzymes with remarkable OXD-like activity could oxidize TMB to blue oxTMB, but 8-hydroxyquinoline (8-HQ) as a metal chelator is capable of discoloring oxTMB. Thus, the addition of 8-HQ decolorized the solution. However, upon the introduction of Cr(VI) ions, 8-HQ preferentially chelated with the Cr(VI) ions, reversing the inhibition of the color reaction and restoring the blue color. Based on this phenomenon, we constructed a novel paper-based analytical device (PAD) that exhibited a linear range of 5-1000 μM and an LOD of 1.2 μM. Importantly, the PAD used in this study shows the merits of simplicity, low preparation costs, and rapid reaction times. When combined with smartphone RGB analysis, it enables the simultaneous analysis of eight different Cr(VI) concentrations without the need for large-scale instrumentation. Moreover, the proposed PAD displays high selectivity, accuracy and utility in testing actual short-necked clam samples. This work not only provides a simple and cost-effective method to detect Cr(VI) but also makes a contribution to rapid food testing.

Metal contamination in coastal and marine ecosystems has become a significant global concern due to its hazardous characteristics, environmental persistence, and ability to bioaccumulate in aquatic ecosystems. This poses a serious threat to the environment and the health of humans worldwide. To address these concerns, this study estimated the concentrations of metals in various trophic levels, including phytoplankton, zooplankton, bivalve, and fish. Monthly sampling was carried out in Pondicherry Fishing Harbor (PFH) and Pondicherry Open Sea (POS) between January 2017 and December 2018. The value of Cd, Pb, Cr, Co, Ni, Cu, Zn, and Mn in sediment at the PFH was considerably higher compared to the POS, indicating the impact of human activity there. The contamination factor (CF) for other metals was <0.5, suggesting minor contamination in the Pondicherry coastal sediment, the CF value for Cd was higher at PFH. Comparably, the risk index (RI) at the PFH was likewise greater because of Cd, leading to an overall risk grade of "considerable" at the PFH whereas it was "low" at the POS. The marine pollution index (MPI) showed minimal values in fish regardless of the collection sites, which was calculated based on the values of all metals. The estimated daily intake, target hazard quotient, and hazard index assessed for potential human health risk suggest that the values were within acceptable thresholds for adults and children for fish consumption from POS. However, the direct consumption of bivalve for the long term poses significant non-carcinogenic health risks in both age groups, particularly in children, who are 1.31 times more susceptible than adults. These findings highlight the need to evaluate the presence of metals in the food chain to determine their transfer to the different trophic levels, which can help mitigate the associated risks for sustainable coastal ecosystem management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Saxidomus purpurata extract (SPE) is a highly consumable seafood worldwide with known health-related benefits. However, there are no reports of its' anti-obesity effect. This study explores the potential of SPE for anti-obesity effects by modulating adipogenesis and lipolysis. SPE reduced intracellular lipid and triglyceride accumulation while increasing free glycerol release in adipocytes. SPE inhibited lipogenesis protein expressions and increased the phosphorylation of hormone-sensitive lipase and Adenosine monophosphate-activated protein kinase (AMPK) to promote lipolysis. In addition, SPE suppressed adipogenesis by downregulating protein expression of key adipogenic markers, peroxisome proliferator-activated receptor gamma (PPARγ), CCAAT/enhancer-binding protein α (C/EBPα), and sterol regulatory element-binding protein 1 (SREBP1) via Wnt/β-catenin signaling. SPE augmented the heme oxygenase-1 (HO-1) expression. Thus, pharmacological intervention with Zinc protoporphyrin (ZnPP-HO-1 antagonist) was employed to validate the HO-1 role. The presence of ZnPP increased the lipid accumulation and reduced the free glycerol release. At the molecular level, adipogenic transcription factors (PPARγ, C/EBPα, and SREBP1) expressions were restored in the presence of ZnPP. GC-MS analysis revealed that SPE was comprised of several fatty acids, contributing to its anti-obesity activity. SPE is an effective nutraceutical that can be used to reduce the progression of obesity. HO-1 expression during adipogenesis might be the mechanism of action for the anti-obesity effect of SPE.

This study investigates the applicability of elemental and Cu isotope compositions in sediments and bivalves from the Korean coast to monitor anthropogenic Cu contamination. Sediments with high Cu (>64.4 mg/kg) and/or moderate enrichment levels (EF Cu ) exhibit homogenous δ 65 Cu AE647 values (-0.12 to +0.16 ‰), suggesting similar anthropogenic Cu fingerprints along the Korean coast. Sediments with Cu concentrations near natural background levels (< 20.6 mg/kg) display large isotopic variability (Δ 65 Cu max-mim : ~0.8 ‰), encompassing those from sediments under anthropic influences. We hypothesize that Cu isotopic compositions of Korean geology are heterogeneous, therefore, natural end-members of source mixing models should be established locally at small scales. Cu concentrations in Oysters correlate with sediments, and their isotopic compositions are more suitable for monitoring Cu contamination, while mussel's regulatory mechanisms seem to affect source records. The current Cu isotope data will help to detect shifts attributable to anthropic contamination in future biomonitoring., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Oral mucosal lesions (OML), which represent a major public health issue worldwide, include any pathological changes in the oral mucosa, such as ulcers, pigmentation, and swelling. Due to its humid and dynamic complex environment, designing oral mucosal preparations poses significant challenges. Drawing inspiration from mussels, this study employed an eco-friendly one-pot strategy for the preparation of chitosan/polydopamine (CS/PDA) films. We demonstrated that CS-induced polymerization of dopamine monomers under acidic conditions, which might be attributed to the large number of hydrogen bonding sites of CS chains. PDA markedly enhances properties of the CS film and exhibits concentration dependence. At the concentration of 1 wt% PDA, the lap-shear strength and tensile strength of CS/PDA films reached 5.01 ± 0.24 kpa and 4.20 ± 0.78 kpa, respectively, indicating that the mucosal adhesion ability was significantly improved. In comparison with the single CS film, the swelling rate of CS/PDA film decreased by about 30 %. Rheological results also showed that the storage modulus returned to 93 % after cyclic large strain, while the single CS film only recovered to 73 %. Moreover, these films demonstrated good biocompatibility and enhanced oral ulcer healing in rats, providing a new and practical option for the local treatment of OML., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Farmed mussels accumulate contaminants from their production environment rather than releasing them into water. This study reveals potential health risks associated with selenium, cadmium, mercury, and lead resulting from the consumption of mussels (Mytilus galloprovincialis) cultured along the coasts of Türkiye and Bulgaria. The concentrations of Se and toxic trace metals were measured by inductively coupled plasma mass spectrometry (ICP-MS). The detection limits (LOD) were 0.100, 0.015, 0.025, and 0.180 µg/kg for Se, Cd, Hg, and Pb, respectively. The mean Se concentrations were between 1.305 and 1.957 µg/g, and toxic metals were below the maximum limits. Due to Turkish and Bulgarian consumers' limited mollusk consumption, mussels could only provide a maximum of 7.35% of the daily Se need. THQ and TTHQ of Se, Cd, and methyl-Hg were below 1, indicating that farmed mussels were safe for consumption. Percent PTWI values were calculated only for Cd and MeHg, as the PTWI value for Pb was discarded by the authorities and not determined for Se. Accordingly, weekly mussel consumption did not pose any risks. The margin of exposure approach was used to evaluate Pb intake. MOE-SBP and MOE-NE were significantly higher than 10, designating no significant health risks. Long-term consumption of mussels also does not pose a carcinogenic risk regarding the TR index calculated between 10 -5 and 10 -6 for Pb. Positive HBV Se (10.13-37.27) indicated that Se in mussels overcame Hg-related potential health concerns. Consequently, mussels grown in Türkiye and Bulgaria did not pose a risk for human consumption, based on current risk analysis methods., (© 2024. The Author(s).)

Omega-3 long-chain polyunsaturated fatty acids (n-3 LC-PUFA) have many health benefits to human. Increasing evidence have shown that climate change reduces the availability of plankton n-3 LC-PUFA to primary consumers which potentially reduces the availability of n-3 LC-PUFA to human. Since marine bivalves are an important source of n-3 LC-PUFA for human beings, and bivalve aquaculture completely depends on phytoplankton in ambient water as food, it is important to understand the impact of climate change on the lipid nutritional quality of bivalves. In this study, fatty acid profile of different bivalves (mussels, oysters, clams, scallops and cockles) from different regions (tropical, subtropical and temperate) and time (before 1990, 1991-1995, 1996-2000, 2001-2005, 2006-2010, 2011-2015, 2016-2020) were extracted from published literature to calculate various lipid nutritional quality indicators. The results of this study revealed that the effects of global warming and declines in aragonite saturation state on the lipid content and lipid indices of bivalves are highly dependent on the geographical region and bivalves. In general, global warming has the largest negative impact on the lipid content and indices of temperate bivalves, including decreasing the PUFA/SFA, EPA + DHA and n-3/n-6. However, global warming has a much smaller negative impact on lipid content and lipid indices in other regions. The declines of aragonite saturation state in seawater promotes the accumulation of lipid content in tropical and subtropical bivalves, but it compromised the PUFA/SFA, EPA + DHA and n-3/n-6 of bivalves in all regions. The findings of this study not only fill the knowledge gap of the impact of climate change on the lipid nutritional quality of bivalves, but also provide guidance for the establishment of bivalve aquaculture and fisheries management plans to mitigate the impact of climate change.

This study comprehensively characterised a protected designation of origin mussel 'Cozza di Scardovari' (Mytilus galloprovincialis) by examining how it is affected by the farming site (outer vs. inner area of the lagoon) and harvest time (21 April vs. 18 May vs. 16 June). Harvest time affected the marketable traits and fatty acid profile of mussels, whereas farming site scarcely affected marketable traits and mussel yields. Mussels from the inner area of the lagoon displayed a superior nutritional profile, including higher contents of proteins (7.8% vs. 7.4%; P < 0.05), lipids (1.2% vs. 1.0%; P < 0.001) and essential amino acids such as tryptophan (+24%; P < 0.05) and valine (+8%; P < 0.05), with a more favourable n-3/n-6 ratio (7.7 vs. 7.0; P < 0.001) than those from the close-to-sea area. Volatile organic compounds, mainly octanoic acid, dimethyl sulphide and 1-penten-3-ol, differed between farming sites within the same lagoon., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Peri-implantitis and osseointegration failure present considerable challenges to the prolonged stability of oral implants. To address these issues, there is an escalating demand for a resilient implant surface coating that seamlessly integrates antimicrobial features to combat bacteria-induced peri‑implantitis, and osteogenic properties to promote bone formation. In the present study, a bio-inspired poly(amidoamine) dendrimer (DA-PAMAM-NH 2 ) is synthesized by utilizing a mussel protein (DA) known for its strong adherence to various materials. Conjugating DA with PAMAM-NH 2 , inherently endowed with antibacterial and osteogenic properties, results in a robust and multifunctional coating. Robust adhesion between DA-PAMAM-NH 2 and the titanium alloy surface is identified using confocal laser scanning microscopy (CLSM) and attenuated total reflectance-infrared (ATR-IR) spectroscopy. Following a four-week immersion of the coated titanium alloy surface in simulated body fluid (SBF), the antimicrobial activity and superior osteogenesis of the DA-PAMAM-NH 2 -coated surface remain stable. In contrast, the bifunctional effects of the PAMAM-NH 2 -coated surface diminish after the same immersion period. In vivo animal experiments validate the enduring antimicrobial and osteogenic properties of DA-PAMAM-NH 2 -coated titanium alloy implants, significantly enhancing the long-term stability of the implants. This innovative coating holds promise for addressing the multifaceted challenges associated with peri‑implantitis and osseointegration failure in titanium-based implants. STATEMENT OF SIGNIFICANCE: Prolonged stability of oral implants remains a clinically-significant challenge. Peri-implantitis and osseointegration failure are two important contributors to the poor stability of oral implants. The present study developed a mussel-bioinspired poly(amidoamine) dendrimer (DA-PAMAM-NH 2 ) for a resilient implant surface coating that seamlessly integrates antimicrobial features to combat bacteria-induced peri‑implantitis, and osteogenic properties to promote bone formation to extend the longevity of oral implants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Published by Elsevier Ltd.)

Chitosan (CS) has physicochemical properties including solubility, crystallinity, swellability, viscosity, and cohesion, along with biological properties like biocompatibility, biodegradation, antioxidant, antibacterial, and antitumor effects. However, these characteristics of CS are greatly affected by its degree of deacetylation, molecular weight, pH and other factors, which limits the application of CS in biomedicine. The modification of CS with catechol-containing substances inspired by mussels can not only improve these properties of CS, but also endow it with self-healing property, providing an environmentally friendly and sustainable way to promote the application of CS in biomedicine. In this paper, the properties of CS and its limitation in the biomedical filed are introduced in detail. Then, the modification methods and properties of substances with catechol groups inspired by mussels on CS are reviewed. Finally, the applications of modified CS in the biomedical field of wound healing, drug delivery, anticancer therapy, biosensor and 3D printing are further discussed. This review can provide valuable information for the design and exploitation of mussel-inspired CS in the biomedical field., Competing Interests: Declaration of competing interest statement The authors declare no competing financial interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Impact of high-pressure processing (HP-P) on microbial inactivation, protein oxidation, collagen fiber, and muscle structure of the edible portion (EP) of blood clams (BC) was investigated. Aerobic plate count, Vibrio parahaemolyticus, V. vulnificus, other Vibrio spp. and Shewanella algae counts were not detectable when HP-P pressure of ≥300 MPa was applied. Carbonyl, disulphide bond content, and surface hydrophobicity upsurged as HP-P with augmenting pressure was employed. Protein with ∼53 kDa appeared when HP-P at 100 and 200 MPa was implemented. Increased pressure enhanced gap formation and abnormal muscle cell structure arrangements. HP-P also affected connective tissue, causing size reduction and disruption of the collagen filament fibers. However, firmness and toughness of BC-EP with HP-P ≤ 300 MPa were comparable to those of the control. HP-P at 300 MPa was therefore appropriate for treatment of BC with maintained textural properties, while less protein oxidation, collagen fiber and muscle structure disruption occurred., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Mussel refers to a marine organism with strong adhesive properties, and it secretes mussel adhesion protein (MAP). The most vital feature of MAP is the abundance of the 3,4-dihydroxyphenylalanine (DOPA) group and lysine, which have antimicrobial, anti-inflammatory, antioxidant, and cell adhesion-promoting properties and can accelerate wound healing. Polydopamine (PDA) is currently the most widely used mussel-inspired material characterized by good adhesion, biocompatibility, and biodegradability. It can mediate various interactions to form functional coatings on cell-material surfaces. Nanofibers based on MAP and mussel-inspired materials have been exerting a vital role in wound repair, while there is no comprehensive review presenting them. This Review introduces the structure of MAPs and their adhesion mechanisms and mussel-inspired materials. Second, it introduces the functionalized modification of MAPs and their inspired materials in electrospun nanofibers and application in wound repair. Finally, the future development direction and coping strategies of MAP and mussel-inspired materials are discussed. Moreover, this Review can offer novel strategies for the application of nanofibers in wound repair and bring about new breakthroughs and innovations in tissue engineering and regenerative medicine.

A simple and reliable methodology for the detection of paralytic shellfish toxins (PSTs) in bivalve tissues using potentiometric chemical sensors was developed. Five methods of PST extraction from mussel and oyster tissues were evaluated, including the AOAC-recommended method, which served as the reference. The main objective was to minimize the matrix effect of the extracts on the sensors' responses and ensure efficient toxin recovery. Extraction procedures using acetic acid with heating and water yielded the highest responses from the potentiometric chemical sensors to PSTs. The highest recovery of PSTs from bivalve tissues was achieved with extraction using acetic acid and heating. Further extract purification, which is indispensable for liquid chromatography with fluorometric detection (LC-FLD) analysis, was found to be unnecessary for analysis with chemical sensors. While water extraction can also be used as a rapid and simple PST extraction method, the lower recoveries should be considered when interpreting the results. Further research is needed to identify the compounds remaining in the extracts that cause a decrease in sensor responses and to develop procedures for their elimination.

The neurotoxin β-N-methylamino-L-alanine (BMAA), produced by cyanobacteria and diatoms, has been implicated as an environmental risk factor for neurodegenerative diseases. This study first investigated the occurrence and monthly distributions of BMAA and its isomers, 2,4-diaminobutyric acid (DAB) and N-2-aminoethylglycine (AEG), in phytoplankton and mussels from 11 sites along the South Sea Coast of Korea throughout 2021. These toxins were quantified using LC-MS/MS, revealing elevated BMAA concentrations from late autumn to spring, with phase lags observed between phytoplankton and mussels. The highest concentration of BMAA in phytoplankton was detected in November (mean: 1490 ng g -1 dry weight (dw)), while in mussels, it peaked in December (mean: 1240 ng g -1 dw). DAB was detected in phytoplankton but was absent in mussels, indicating limited bioaccumulation potential. In February, the peak mean DAB concentration in phytoplankton was 89 ng g -1 dw. AEG was not detected in any samples. Chlorophyll-a concentrations consistently showed an inverse correlation with BMAA concentrations in mussels throughout the year. Through correlation analysis, four diatom genera, Bacillaria, Hemiaulus, Odontella, and Pleurosigma, were identified as potential causative microalgae of BMAA. This study offers insights into identifying the causative microalgae for BMAA and informs future regulatory efforts regarding unmanaged biotoxins., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Rapid hemostasis, potent antimicrobial activity, and efficient wound management are critical factors in enhancing the survival of trauma patients. Chitosan, as a green and sustainable biomaterial with low cost, degradability and biocompatibility, is widely used in the biomedical field. However, chitosan dissolves in an acidic environment, which is not conducive to wound healing. In this study, chitosan was chemically modified to address this limitation. A mussel-inspired hydrogel composed of caffeic acid-grafted chitosan, gallic acid-grafted chitosan, and oxidized microcrystalline cellulose (CHI-C/CSG/OMCC) was designed. This hydrogel exhibits blood-responsive gelation behavior and offers a synergistic combination of tissue adhesion, antimicrobial properties, and tissue repair capabilities. The carboxyl, hydroxyl, phenolic hydroxyl and aldehyde groups within the hydrogel system endowed the hydrogel with excellent adhesion properties (53.1 kPa adhesion strength to porcine skin-adherent tissues), biocompatibility, and excellent antimicrobial properties. Surprisingly, this hydrogel not only achieved rapid and effective hemostasis, but also effectively promoted wound healing in a mouse skin injury model. In addition, its remarkable efficacy in stopping bleeding within approximately 2 min without rebleeding was demonstrated in a porcine model of acute gastrointestinal hemorrhage in the esophagus, stomach, and intestines. This blood-responsive ternary hydrogel offers a promising alternative to wound management materials due to its excellent overall performance and superior efficacy in all phases of wound healing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Bivalves, such as oysters and mussels, are exposed to environmental pollutants, like microplastics (MPs) and arsenic (As). This study investigated co-existence and interaction of MPs and As (total As and As species) in two bivalve species from the Chinese coastline. Smaller MPs (20-100 μm) averaged 30.98 items/g, while larger MPs (100-500 μm) averaged 2.98 items/g. Oysters contained more MPs (57.97 items/g) in comparison to mussels (11.10 items/g). In Contrast, mussels had a higher As concentrations (8.36-23.65 mg/kg) than oysters (4.97-11.02 mg/kg). The size and composition of MPs influenced As uptake and speciation in bivalves, with inorganic arsenic (iAs) and methylated arsenic (MMA and DMA) correlating with larger-sized MPs. Polyethylene (PE) may interact with the formation of arsenobetaine (AsB) in oyster. This study provides valuable insights into the interaction of MPs and As in marine ecosystems and highlights their implications for food safety., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Oral aphthous ulcers are common mucosal lesions that cause pain and discomfort. There are diverse biomaterials and drug treatments for oral ulcers used in both research and clinical settings. However, the complex oral environment often results in low adhesion and short drug retention times, which lead to poor drug availability and treatment outcomes. In this study, a mussel-inspired adhesive hydrogel was developed by grafting catechol onto hyaluronic acid (C-HA), and dopamine was added for oxidative pre-polymerization to form modified hyaluronic acid (M-HA), which remarkably increased the adhesion of the hydrogels. Then, M-HA was interpenetrated into the gelatin methacryloyl (GelMA) network. Chlorhexidine gluconate (CHG) was then incorporated into the hydrogel to enhance its availability and therapeutic effect through its sustained-release capability. The GelMA/M-HA hydrogel demonstrated strong adhesion to wet tissues, antibacterial and anti-inflammatory properties, and good biocompatibility. In both rat oral ulcers and infected wounds, the adhesive hydrogel significantly accelerated the healing of the ulcers and infected wounds. These results indicated that this adhesive hydrogel offers a promising new strategy for the treatment of oral ulcers in clinical practice. STATEMENT OF SIGNIFICANCE: Oral ulcers are a common and high-incidence mucosal condition that seriously affect people's daily lives, often making it difficult for patients to chew and speak. However, a dynamic oral environment with various types of bacteria influences drug availability and treatment effects in clinical settings. To address this challenge, an adhesive, mussel-inspired, drug-loaded hydrogel was constructed using natural macromolecules (hyaluronic acid and gelatin) with good biocompatibility. Chlorhexidine gluconate (CHG), with its broad-spectrum antibacterial activity, has been incorporated to synergistically promote oral ulcer healing. The splendid adhesion, antibacterial, and therapeutic effects of this hydrogel demonstrated a new strategy for treating oral ulcers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Lubricant-infused slippery surfaces have recently emerged as promising antifouling coatings, showing potential against proteins, cells, and marine mussels. However, a comprehensive understanding of the molecular binding behaviors and interaction strength of foulants to these surfaces is lacking. In this work, mussel-inspired chemistry based on catechol-containing chemicals including 3,4-dihydroxyphenylalanine (DOPA) and polydopamine (PDA) is employed to investigate the antifouling performance and repellence mechanisms of fluorinated-based slippery surface, and the correlated interaction mechanisms are probed using atomic force microscopy (AFM). Intermolecular force measurements and deposition experiments between PDA and the surface reveal the ability of lubricant film to inhibit the contact of PDA particles with the substrate. Moreover, the binding mechanisms and bond dissociation energy between a single DOPA moiety and the lubricant-infused slippery surface are quantitatively investigated employing single-molecule force spectroscopy based on AFM (SM-AFM), which reveal that the infused lubricant layer can remarkably influence the dissociation forces and weaken the binding strength between DOPA and underneath per-fluorinated monolayer surface. This work provides new nanomechanical insights into the fundamental antifouling mechanisms of the lubricant-infused slippery surfaces against mussel-derived adhesive chemicals, with important implications for the design of lubricant-infused materials and other novel antifouling platforms for various bioengineering and engineering applications., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

Traumatic brain injury (TBI) triggers inflammatory response and glial scarring, thus substantially hindering brain tissue repair. This process is exacerbated by the accumulation of activated immunocytes at the injury site, which contributes to scar formation and impedes tissue repair. In this study, a mussel-inspired nitric oxide-release microreservoir (MINOR) that combines the features of reactive oxygen species (ROS) scavengers and sustained NO release to promote angiogenesis and neurogenesis is developed for TBI therapy. The injectable MINOR fabricated using a microfluidic device exhibits excellent monodispersity and gel-like self-healing properties, thus allowing the maintenance of its structural integrity and functionality upon injection. Furthermore, polydopamine in the MINOR enhances cell adhesion, significantly reduces ROS levels, and suppresses inflammation. Moreover, a nitric oxide (NO) donor embedded into the MINOR enables the sustained release of NO, thus facilitating angiogenesis and mitigating inflammatory responses. By harnessing these synergistic effects, the biocompatible MINOR demonstrates remarkable efficacy in enhancing recovery in mice. These findings benefit future therapeutic interventions for patients with TBI., (© 2023 Wiley‐VCH GmbH.)

In this study, hydroxyapatite (HAp) was synthesized from natural biowaste materials, specifically mussel shells, and combined with chitosan (CS) and gentamicin sulfate antibiotic (GA) using an in-situ method. The resulting composite material, designated HAp/CS-GA, has its physicochemical and structural properties characterized by Fourier transform infrared spectroscopy (FTIR) analysis. The structure was confirmed by X-ray diffraction (XRD) analysis. Additionally, field emission scanning electron microscopy (FE-SEM) equipped with the energy dispersive X-ray spectroscopic (EDX) technique was used to determine the surface topography and main components. The composite of HAp/CS-GA was analyzed using a drug release profile by UV-visible spectroscopy (UV-Vis). The fabricated composites antimicrobial behavior was examined against bone infection-causing Gram-positive and Gram-negative bacteria, showing potential activity against Klebsiella pneumoniae, Pseudomonas aeruginosa, and Staphylococcus aureus compared to Escherichia coli, respectively. Simultaneously, the cytotoxicity of the composite was evaluated by MTT assay using an MG-63 osteoblast-like cell line that exhibited no toxicity in the prepared composite. After a 24 h incubation period, the MG-63 cells on the HAp/CS-GA composite showed good proliferation, according to Hoechst 33258 fluorescence staining results. The results suggested that the composite had excellent biocompatibility and antibacterial activity and enhanced the osteoblast cell proliferation. Therefore, the designed HAp/CS-GA composite would be a promising candidate for bone tissue engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Wearable technologies are becoming pervasive in our society, and their development continues to accelerate the untapped potential of continuous and ubiquitous sensing, coupled with big data analysis and interpretation, has only just begun to unfold. However, existing wearable devices are still bulky (mainly due to batteries and electronics) and have suboptimal skin contact. In this work, we propose a novel approach based on a sensor network produced through inkjet printing of nanofunctional inks onto a semipermeable substrate. This network enables real-time monitoring of critical physiological parameters, including temperature, humidity, and muscle contraction. Remarkably, our system operates under battery-free and wireless near-field communication (NFC) technology for data readout via smartphones. Moreover, two of the three sensors were integrated onto a naturally adhesive bioinspired membrane. This membrane, developed using an eco-friendly, high-throughput process, draws inspiration from the remarkable adhesive properties of mussel-inspired molecules. The resulting ultra-conformable membrane adheres effortlessly to the skin, ensuring reliable and continuous data collection. The urgency of effective monitoring systems cannot be overstated, especially in the context of rising heat stroke incidents attributed to climate change and high-risk occupations. Heat stroke manifests as elevated skin temperature, lack of sweating, and seizures. Swift intervention is crucial to prevent progression to coma or fatality. Therefore, our proposed system holds immense promise for the monitoring of these parameters on the field, benefiting both the general population and high-risk workers, such as firefighters., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Marine mussels fabricate tough collagenous fibers known as byssal threads to anchor themselves. Threads are produced individually in minutes via secretion of liquid crystalline (LC) collagenous precursors (preCols); yet the physical and chemical parameters influencing thread formation remain unclear. Here, we characterized the structural anisotropy of native and artificially induced threads using quantitative polarized light microscopy and transmission electron microscopy to elucidate spontaneous vs regulated aspects of thread assembly, discovering that preCol LC phases form aligned domains of several hundred microns, but not the cm-level alignment of native threads. We then explored the hypothesized roles of mechanical shear, pH, and metal ions on thread formation through in vitro assembly studies employing a microfluidic flow focusing device using purified preCol secretory vesicles. Our results provide clear evidence for the role of all three parameters in modulating the structure and properties of the final product with relevance for fabrication of collagenous scaffolds for tissue engineering applications.

Climate change and environmental pollution have underscored the urgency for more sustainable alternatives in synthetic polymer production. Nature's repertoire of biopolymers with excellent multifaceted properties alongside biodegradability could inspire next-generation innovative green polymer fabrication routes. Stimuli-induced processing, driven by changes in environmental factors, such as pH, ionic strength, and mechanical forces, plays a crucial role in natural polymeric self-assembly process. This perspective aims to close the gap in understanding biopolymer formation by highlighting the essential role of stimuli triggers in facilitating the bottom-up fabrication, allowing for the formation of intricate hierarchical structures. In particular, this perspective will delve into the stimuli-responsive processing of high-performance biopolymers produced by mussels, caddisflies, velvet worms, sharks, whelks, and squids, which are known for their robust mechanical properties, durability, and wet adhesion capabilities. Finally, we provide an overview of current advancements and challenges in understanding stimuli-induced natural formation pathways and their translation to biomimetic materials.

Addressing the critical health concerns posed by domoic acid (DA), a neurotoxic compound produced by toxic marine algae and bioaccumulated in shellfish, necessitates the development of a rapid, precise, and robust detection system. Traditional DA detection methods have stability and sensitivity issues, which hinder effective toxin detection. To overcome these limitations, we developed a novel direct competitive enzyme-linked immunosorbent assay (dc-ELISA) platform that utilizes peptide-immobilized magnetic beads (MGBs/peptide). The affinity peptides identified through phage display and chemically synthesized with biotin labels present an innovative alternative to conventional antibodies for ELISA applications. Streptavidin-modified MGBs were used as the bioreceptor carriers to facilitate magnetic separation and simplify sample preparation, making the MGB/peptide-based dc-ELISA platform an ideal tool for comprehensive monitoring efforts. The developed platform exhibits a detection range of 0.5-10 ng mL -1 and a low limit of detection of 0.29 ng mL -1 , offering enhanced sensitivity and cost-effectiveness. Moreover, our developed dc-ELISA demonstrated a high recovery rate when validated with DA-spiked CRM-mussel samples. This method overcomes the limitations of traditional detection techniques and offers a scalable and efficient approach to marine toxin surveillance with improved marine environmental monitoring and public health management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Several Dinophysis species can produce potent lipophilic toxins that pose a risk to human health when contaminated seafood is consumed, especially filter-feeding bivalve mussels. In the mussel farms of the Northwestern Adriatic Sea, seawater and seafood are regularly monitored for the presence of Dinophysis species and their associated toxins, but the current methodological approaches, such as light microscopy determinations, require a long time to make results available to local authorities. A molecular qPCR-based assay can be used to quantify various toxic Dinophysis species in a shorter timeframe. However, this approach is not currently employed in official testing activities. In this study, field samples were collected monthly or bi-weekly over one year from various mussel farms along the Northwestern Adriatic coast. The abundance of Dinophysis species in the seawater was determined using both traditional microscopy and qPCR assays. In addition, the concentration of lipophilic toxins for DSP in mussel flesh was quantified using LC-MS/MS focusing on the okadaic acid group. Dinophysis spp. site-specific single cells were isolated and analysed by qPCR yielding a mean rDNA copy number per cell of 1.21 × 10 4 ± 1.81 × 10 3 . The qPCR assay gave an efficiency of 98 % and detected up to 10 copies of the rDNA target gene. The qPCR and light microscopy determinations in environmental samples showed a significant positive correlation (Spearman r s = 0.57, p-value < 0.001) with a ratio of 2.24 between the two quantification methods, indicating that light microscopy estimates were generally 44.6 % lower than those obtained by the qPCR assay. The qPCR approach showed several advantages such as rapidity, sensitivity and efficiency over conventional microscopy analysis, showing its potential future role in phytoplankton monitoring under the Official Controls Regulations for shellfish., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

As a natural "binder," lignin fixes cellulose in plants to foster growth and longevity. However, isolated lignin has a poor binding ability, which limits its biomedical applications. In this study, inspired by mussel adhesive proteins, acidic/basic amino acids (AAs) are introduced in alkali lignin (AL) to form ionic-π/spatial correlation interactions, followed by demethylation to create catechol residues for enhanced adhesion activity. Atomic force microscopy reveals that catechol residues are the primary adhesion structures, with basic AAs exhibiting superior synergistic effects compared to acidic AAs. Demethylated lysine-grafted AL exhibits the strongest adhesion force toward skin tissue. Molecular dynamic simulation and density functional theory calculations indicate that adhesion against skin tissue mainly results from hydrogen bonds and cation-π interactions, with the adhesion mechanism being based on the Gibbs free energy of the Schiff base reaction. In summary, a biomimetic electrode based on lignin inspired by mussel adhesive proteins is prepared; the presented method offers a straightforward strategy for the development of biomimetic adhesives. Furthermore, this mussel-inspired adhesive can be used as a wearable bioelectrode in biomedical applications., (© 2024 Wiley‐VCH GmbH.)

Morphology regulation of heterodimer nanoparticles and the use of their asymmetric features for further practical applications are crucial because of the rich optical properties and various combinations of heterodimers. This work used silicon to asymmetrically wrap half of a gold sphere and grew gold branches on the bare gold surface to form heterogeneous nano pineapples (NPPs) which can effectively improve Surface-enhanced Raman scattering (SERS) properties through chemical enhancement and lightning-rod effect respectively. The asymmetric structures of NPPs enabled them to self-assemble into the monolayer membrane with consistent branch orientation. The prepared substrate had high homogeneity and better SERS ability than disorganized substrates, and achieved reliable detection of malachite green (MG) in clams with a detection limit of 7.8 × 10 -11 M. This work provided a guide to further revise the morphology of heterodimers and a new idea for the use of asymmetric dimers for practically photochemical and biomedical sensing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Discrete water samples represent a snapshot of conditions at a particular moment in time and may not represent a true chemical exposure caused by changes in chemical input, tide, flow, and precipitation. Sampling technologies have been engineered to better estimate time-weighted concentrations. In this study, we consider the utility of three integrative sampling platforms: polar organic chemical integrative sampler (POCIS), silicone bands (SBs), and continuous, low-level aquatic monitoring (CLAM). This experiment used simulated southeastern salt marsh mesocosm systems to evaluate the response of passive (POCIS, SBs) and active sampling (CLAM) devices along with discrete sampling methodologies. Three systems were assigned to each passive sampler technology. Initially, all tanks were dosed at nominal (low) bifenthrin, pyrene, and triclosan concentrations of 0.02, 2.2, and 100 µg/L, respectively. After 28 days, the same treatment systems were dosed a second time (high) with bifenthrin, pyrene, and triclosan at 0.08, 8.8, and 200 µg/L, respectively. For passive samplers, estimated water concentrations were calculated using published or laboratory-derived sampling rate constants. Chemical residues measured from SBs resulted in high/low ratios of approximately 2x, approximately 3x, and 1x for bifenthrin, pyrene, and triclosan. A similar pattern was calculated using data from POCIS samples (~4x, ~3x, ~1x). Results from this study will help users of CLAM, POCIS, and SB data to better evaluate water concentrations from sampling events that are integrated across time. Integr Environ Assess Manag 2024;20:1384-1395. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC)., (© 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).)

Implant-associated infections impose great burden on patient health and public healthcare. Antimicrobial peptides and metal ions are generally incorporated onto implant surface to deter bacteria colonization. However, it is still challenging to efficiently prevent postoperative infections at non-cytotoxic dosages. Herein, a scaffold based on porous titanium coated with a mussel-inspired dual-diameter TiO 2 nanotubes is developed for loading dual drugs of LL37 peptide and Zn 2+ with different sizes and characteristics. Benefiting from in-situ formed polydopamine layer and dual-diameter nanotubular structure, the scaffold provides an efficient platform for controllable drugs elution: accelerated release under acidic condition and sustained release for up to 28 days under neutral/alkalescent circumstances. Such combination of dual drugs simultaneously enhanced antibacterial efficacy and osteogenesis. In antibacterial test, LL37 peptide serving as bacteria membrane puncture agent, and Zn 2+ acting as ROS generator, cooperatively destroyed bacterial membrane integrity and subsequently damaged bacterial DNA, endowing dual-drug loaded scaffold with remarkable bactericidal efficiency of > 92 % in vitro and > 99 % in vivo. Noteworthily, dual-drug loaded scaffold promoted bone-implant osteointegration under infectious microenvironment, overmatching single-drug load ones. It provides a promising strategy on surface modification of implant for infected bone defect repairing., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Wound closure in surgeries is traditionally achieved using invasive methods such as sutures and staples. Adhesion-based wound closure methods such as tissue adhesives, sealants, and hemostats are slowly replacing these methods due to their ease of application. Although several chemistries have been developed and used commercially for wound closure, there is still a need for better tissue adhesives from the point of view of toxicity, wet-adhesion strength, and long-term bonding. Catechol chemistry has shown great promise in developing wet-set adhesives that meet these criteria. Herein, we have studied the biocompatibility of a catechol-based copolymer adhesive, poly([dopamine methacrylamide]-co-[methyl methacrylate]-co-[poly(ethylene glycol) methyl ether methacrylate]) or poly(catechol-MMA-OEG), which is soluble in water. The adhesive was injected subcutaneously in a mouse model on its own and in combination with a sodium periodate crosslinker. After 72 h, 4 weeks, and 12 weeks, the mice were euthanized and subjected to histopathological analysis. Both adhesives were present and still palpable at the end of 12 weeks. The moderate inflammation observed for the poly(catechol-MMA-OEG) cohort at 72 h had reduced to mild inflammation at the end of 12 weeks. However, the moderate inflammatory response observed for the poly(catechol-MMA-OEG) + crosslinker cohort at 72 h had not subsided at 12 weeks., (© 2024 The Author(s). Journal of Biomedical Materials Research Part A published by Wiley Periodicals LLC.)

Solenaia oleivora is a valuable freshwater mussel endemic to China with a high content of high-quality proteins, but the lack of structural information and limited functionality of Solenaia oleivora proteins constrained their application in the food industry. This study investigates the changes in structural characteristics and functionality of Solenaia oleivora protein under ultrasound processing at power from 200 to 600 W. The ultrasound treatment caused increased contents of β-turn and α-helix, and the exposure of interior hydrophobic groups, resulting in the increased hydrophobicity by around 3 folds. The ultrasound treatment could significantly decrease particle size and increase surface charges of Solenaia oleivora proteins, facilitating the increase of hydrosolubility from 10.2% to 81.7%. These structural changes and increased hydrosolubility contributed to the enhancement of emulsifying and foaming properties, and in vitro digestibility. The results suggested that the ultrasound-treated Solenaia oleivora proteins possessed the potential as an alternative protein in food applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Instant and strong adhesion to underwater adherends is a big challenge due to the continuous interference of water. Mussel foot protein-bioinspired catechol-based adhesives have garnered great interest in addressing this issue. Herein, a novel self-made catecholic compound with a long aliphatic chain was utilized to prepare thin (∼0.07 mm) and optically transparent (>80%) wet/underwater adhesive tapes by UV-initiated polymerization. Its adhesion activity was water-triggered, fast (<1 min), and strong (adhesion strength to porcine skin: ∼1.99 MPa; interfacial toughness: ∼610 J/m 2 , burst pressure: ∼1950 mmHg). The effect of the catechol/phenol group and positively charged moiety on the wet/underwater adhesion to abiotic/biotic substrates was investigated. On the wet/underwater adherends, the tape with catechol groups presented much higher interfacial toughness, adhesion strength, and burst pressure than the analogous tape with phenol groups. The tape with both the catechol group and cationic polyelectrolyte chitosan had a more impressive improvement in its adhesion to wet/underwater biological tissues than to abiotic substrates. Therefore, catechol and a positive moiety in the tape would synergistically enhance its wet/underwater adhesion to various substrates, especially to biological tissues. The instant, strong, and noncytotoxic tape may provide applications in underwater adhesion for sealing and wound closure.

The impressive adhesive capacity of marine mussels has inspired various fascinating designs in biomedical fields. Mussel-inspired injectable adhesive hydrogels, as a type of promising mussel-inspired material, have attracted much attention due to their minimally invasive property and desirable functions provided by mussel-inspired components. In recent decades, various mussel-inspired injectable adhesive hydrogels have been designed and widely applied in numerous biomedical fields. The rational incorporation of mussel-inspired catechol groups endows the injectable hydrogels with the potential to exhibit many properties, including tissue adhesiveness and self-healing, antimicrobial, and antioxidant capabilities, broadening the applications of injectable hydrogels in biomedical fields. In this review, we first give a brief introduction to the adhesion mechanism of mussels and the characteristics of injectable hydrogels. Further, the typical design strategies of mussel-inspired injectable adhesive hydrogels are summarized. The methodologies for integrating catechol groups into polymers and the crosslinking methods of mussel-inspired hydrogels are discussed in this section. In addition, we systematically overview recent mussel-inspired injectable adhesive hydrogels for biomedical applications, with a focus on how the unique properties of these hydrogels benefit their applications in these fields. The challenges and perspectives of mussel-inspired injectable hydrogels are discussed in the last section. This review may provide new inspiration for the design of novel bioinspired injectable hydrogels and facilitate their application in various biomedical fields.

Metal-phenolic networks (MPNs) have emerged as a versatile and multifunctional platform applied in bioimaging, disease treatment, electrocatalysis, and water purification. The synthesis of MPNs with mesoporous frameworks and ultra-small diameters (<200 nm), crucial for post-modification, cargo loading, and mass transport, remains a formidable challenge. Inspired by mussel chemistry, mesoporous metal-phenolic nanospheres (MMPNs) are facilely prepared by direct deposition of the metal-polyphenol complex on the interface of oil nano-droplets composed of block copolymers/1,3,5-trimethylbenzene followed by a spontaneous template-removal process. Due to the penetrable and stable networks, the oil nano-droplets gradually leak from the networks driven by shear stress during the stirring process. As a result, MMPNs are obtained without additional template removal procedures such as solvent extraction or high-temperature calcination. The materials have a large pore size (∼12.1 nm), uniform spherical morphology with a small particle size (∼99 nm), and a large specific surface area (49.8 m 2 g -1 ). Due to the abundant phenolic hydroxyl groups, the MMPNs show excellent antioxidative property. The MMPNs also have excellent photothermal property, whose photothermal conversion efficiency was 40.9 %. Moreover, the phenolic hydroxyl groups can reduce Ag + in situ to prepare Ag nanoparticles loaded MMPNs composites, which have excellent inhibition performance of drug-resistant bacteria biofilm., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Municipal wastewater treatment plants are required to monitor persistent organic pollutants (POPs) in their wastewater treatment related discharges and to assess the impact of the discharges on the environment and public health. One tool for monitoring chlorinated organic pollutants particularly is a gas chromatographic (GC) system coupled to a pair of halogen-specific electron capture detectors (ECDs) with helium (He) as the mobile phase. He supplies, however, has become inconsistent and unreliable lately. In its place, N 2 gas is evaluated in this study as a potential substitute for He in quantifying organochlorine pesticides, polychlorinated biphenyls, chlordane congeners and toxaphene in wastewater treatment related matrices (influent, effluent, benthic sediment, mussel tissue, and biosolids/sludge). N 2 is inert, inexpensive and requires no additional hardware to incorporate into the basic functions of a GC-ECD. Our results show that, with the usual data quality controls (blank, laboratory control, matrix spike/duplicate and proficiency testing samples, and the fact that certified reference materials data met requirements), N 2 can replace He for regulatory purposes. And when necessary, the N 2 -based retention times (t N ) can be predicted reliably from He-based retention times (t He ), irrespective of column chemistry or POPs (here: t N = 1.90t He + 0.04, R 2 = 0.996)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (Copyright © 2024 Elsevier B.V. All rights reserved.)

Water molecules pose a significant obstacle to conventional adhesive materials. Nevertheless, some marine organisms can secrete bioadhesives with remarkable adhesion properties. For instance, mussels resist sea waves using byssal threads, sandcastle worms secrete sandcastle glue to construct shelters, and barnacles adhere to various surfaces using their barnacle cement. This work initially elucidates the process of underwater adhesion and the microstructure of bioadhesives in these three exemplary marine organisms. The formation of bioadhesive microstructures is intimately related to the aquatic environment. Subsequently, the adhesion mechanisms employed by mussel byssal threads, sandcastle glue, and barnacle cement are demonstrated at the molecular level. The comprehension of adhesion mechanisms has promoted various biomimetic adhesive systems: DOPA-based biomimetic adhesives inspired by the chemical composition of mussel byssal proteins; polyelectrolyte hydrogels enlightened by sandcastle glue and phase transitions; and novel biomimetic adhesives derived from the multiple interactions and nanofiber-like structures within barnacle cement. Underwater biomimetic adhesion continues to encounter multifaceted challenges despite notable advancements. Hence, this work examines the current challenges confronting underwater biomimetic adhesion in the last part, which provides novel perspectives and directions for future research.

In the intricate landscape of Traumatic Brain Injury (TBI), the management of TBI remains a challenging task due to the extremely complex pathophysiological conditions and excessive release of reactive oxygen species (ROS) at the injury site and the limited regenerative capacities of the central nervous system (CNS). Existing pharmaceutical interventions are limited in their ability to efficiently cross the blood-brain barrier (BBB) and expeditiously target areas of brain inflammation. In response to these challenges herein, we designed novel mussel inspired polydopamine (PDA)-coated mesoporous silica nanoparticles (PDA-AMSNs) with excellent antioxidative ability to deliver a new potential therapeutic GSK-3β inhibitor lead small molecule abbreviated as Neuro Chemical Modulator (NCM) at the TBI site using a neuroprotective peptide hydrogel (PANAP). PDA-AMSNs loaded with NCM (i.e., PDA-AMSN-D) into the matrix of PANAP were injected into the damaged area in an in vivo cryogenic brain injury model (CBI). This approach is specifically built while keeping the logic AND gate circuit as the primary focus. Where NCM and PDA-AMSNs act as two input signals and neurological functional recovery as a single output. Therapeutically, PDA-AMSN-D significantly decreased infarct volume, enhanced neurogenesis, rejuvenated BBB senescence, and accelerated neurological function recovery in a CBI.

Catheter-associated urinary tract infections are the most common hospital-acquired infections and cause patient discomfort, increased morbidity, and prolonged stays, altogether posing a huge burden on healthcare services. Colonization occurs upon insertion, or later by ascending microbes from the rich periurethral flora, and is therefore virtually unavoidable by medical procedures. Importantly, the dwell time is a significant risk factor for bacteriuria because it gives biofilms time to develop and mature. This is why we engineer antibacterial and antibiofilm coating through ultrasound- and nanoparticle-assisted self-assembly on silicone surfaces and validate it thoroughly in vitro and in vivo. To this end, we combine bimetallic silver/gold nanoparticles, which exercise both biocidal and structural roles, with dopamine-modified gelatin in a facile and substrate-independent sonochemical coating process. The latter mussel-inspired bioadhesive potentiates the activity and durability of the coating while attenuating the intrinsic toxicity of silver. As a result, our approach effectively reduces biofilm formation in a hydrodynamic model of the human bladder and prevents bacteriuria in catheterized rabbits during a week of placement, outperforming conventional silicone catheters. These results substantiate the practical use of nanoparticle-biopolymer composites in combination with ultrasound for the antimicrobial functionalization of indwelling medical devices.

Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles (Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10 -8 to 0.1 × 10 -18  M, with a low detection limit (LOD) of 0.1 × 10 -18 , 0.1 × 10 -16 , and 0.1 × 10 -17  M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10 -4  mA M -1 (PDA), 7.08 × 10 -4  mA M -1 (PNE), and 6.03 × 10 -4  mA M -1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Background: Determining the concentration of nanoparticles (NPs) in marine organisms is important for evaluating their environmental impact and to assess potential food safety risks to human health., Objective: The current work aimed at developing an in-house method based on single-particle inductively coupled plasma-mass spectrometry (SP-ICP-MS) suitable for surveillance of NPs in mussels., Methods: A new low-cost and simple protease mixture was utilized for sample digestion, and novel open-source data processing was used, establishing detection limits on a statistical basis using false-positive and false-negative probabilities. The method was validated for 30 and 60 nm gold NPs spiked to mussels as a proxy for seafood., Results: Recoveries were 76-77% for particle mass concentration and 94-101% for particle number concentration. Intermediate precision was 8-9% for particle mass concentration and 7-8% for particle number concentration. The detection limit for size was 18 nm, for concentration 1.7 ng/g, and 4.2 × 105 particles/g mussel tissue., Conclusion: The performance characteristics of the method were satisfactory compared with numeric Codex criteria. Further, the method was applied to titanium-, chromium- and copper-based particles in mussels., Highlights: The method demonstrates a new practical and cost-effective sample treatment, and streamlined, transparent, and reproducible data treatment for the routine surveillance of NPs in mussels., (© The Author(s) 2024. Published by Oxford University Press on behalf of AOAC INTERNATIONAL.)

Curcumin demonstrated therapeutic potential for cancer. However, its medical application is limited due to low solubility, poor stability and low absorption rate. Here, we used the mussel-inspired functional protein (MPKE) to fabricate the curcumin-carrying nanoparticle (Cur-MPKE) for encapsulating and delivering curcumin. The protein MPKE is composed of the mussel module and zwitterionic peptide. The Dopa group bonding characteristic of the mussel module was leveraged for the self-assembly of nanoparticles, while the superhydrophilic property of the zwitterionic peptide was utilized to enhance the stability of nanoparticles. As expected, MPKE and Cur are tightly bound through hydrogen bonds and dynamic imide bonds to form nanoparticles. Cur-MPKE showed improved solubility and stability in aqueous solutions as well as excellent biocompatibility. Besides, Cur-MPKE also exhibited pH-triggered release and enhanced uptake of curcumin by tumor cells, promoting the antioxidant activity and antitumor effect of curcumin. Moreover, systemic experiments of Cur-MPKE to rats demonstrated that Cur-MPKE significantly inhibited tumor tissue growth and proliferation without causing obvious systemic toxicity. This work provides a new strategy for fabricating the delivery system of curcumin with improved stability, sustainability and bioavailability., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microplastic (MP) pollution has become a global concern due to its potential impacts on the environment, ecosystem services and human health. The goals of the present study were to document the MP contamination in wild specimens of Mytilus galloprovincialis sampled along the Atlantic coast of the North region of Portugal continental (NW Portuguese coast), and to estimate the human risk of MP intake (HRI) through the consumption of local mussels as seafood. Mussels were collected at four sampling sites along the NW Portuguese coast (40 mussels per site), and the whole soft body of each mussel was analysed for MP content. HRI estimates were based on the mean of MP items per wet weight of mussel analysed tissue (MP/g) and consumption habits. A total of 132 MP items were recovered from mussels. MP had diverse sizes (98-2690 μm) and colours. The most common shapes were fibres (39%) and pellets (36%). Five polymers were identified in the MP: polyethylene (50%), polystyrene (15%), poly(ethylene vinyl acetate) (14%), polyamide (12%) and polypropylene (9%). From the 160 analysed mussels, 55% had MP. The mean and standard error of the mean of mussel contamination ranged from 0.206 ± 0.067 and 0.709 ± 0.095 MP/g. Compared to estimates based on MP contamination in mussels from other areas and varied consumption habits, the HRI through the consumption of mussels from the NW Portuguese coast is relatively low., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: Asiatic hard clam (Meretrix meretrix) is an underutilized bivalve resource. This study discusses dried clam powders prepared from this resource to enhance its utilization and improve nutritional security in protein-deficient populations. Dried clam powder was prepared from Asiatic hard clam and the effects of different pre-cooking methods (boil-dried clam powder, BDCP; steam-dried clam powder, SDCP; and microwave-dried clam powder, MDCP) on nutritional (proximate composition, amino acid profiling, mineral profiling, fatty acid profiling) and physicochemical qualities were investigated., Results: Different pre-cooking methods significantly influenced the characteristics of the clam powder. The MDCP sample showed the highest concentration of amino acids, polyunsaturated fatty acids, Na, K, Ca and Mg content compared to BDCP and SDCP. The boiling process led to a loss of nutritional quality in terms of amino acids and macrominerals. The MDCP displayed the highest solubility in water (30.10%) but its oil and water absorption characteristics were the lowest among all the samples. Boil-cooked clam powder displayed the highest oil binding (2.03 mL g -1 protein) capacity. Boiling and steaming processes resulted in malondialdehyde generation compared to microwaving. Different pre-cooking processes did not influence the colour attributes significantly, but the control sample prepared without pre-cooking (CCP) had a significantly lower L* value (32.34), resulting in a darker product. In vitro digestibility of the clam powder varied in the order MDCP > SDCP > BDCP > CCP., Conclusion: The study demonstrated that nutritionally rich protein powder can be prepared from Asiatic hard clam. Based on the results, microwave pre-cooking is considered the best pre-cooking method to preserve the nutritional qualities of clam powder. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Adsorption is considered an interesting option for removing antibiotics from the environment because of its simple design, low cost, and potential efficiency. In this work we evaluated three by-products (pine bark, oak ash, and mussel shell) as bio-adsorbents for the antibiotic azithromycin (AZM). Furthermore, they were added at doses of 48 t ha -1 to four different soils, then comparing AZM removal for soils with and without bio-adsorbents. Batch-type experiments were used, adding AZM concentrations between 2.5 and 600 μmol L -1 to the different bio-adsorbents and soil + bio-adsorbent mixtures. Regarding the bio-adsorbents, oak ash showed the best adsorption scores (9600 μmol kg -1 , meaning >80% retention), followed by pine bark (8280 μmol kg -1 , 69%) and mussel shell (between 3000 and 6000 μmol kg -1 , 25-50% retention). Adsorption data were adjusted to different models (Linear, Freundlich and Langmuir), showing that just mussel shell presented an acceptable fitting to the Freundlich equation, while pine bark and oak ash did not present a good adjustment to any of the three models. Regarding desorption, the values were always below the detection limit, indicating a rather irreversible adsorption of AZM onto these three by-products. Furthermore, the results showed that when the lowest concentrations of AZM were added to the not amended soils they adsorbed 100% of the antibiotic, whereas when the highest concentrations of AZM were spread, the adsorption decreased to 55%. However, when any of the three bio-adsorbents was added to the soils, AZM adsorption reached 100% for all the antibiotic concentrations used. Desorption was null in all cases for both soils with and without bio-adsorbents. These results, corresponding to an investigation carried out for the first time for the antibiotic AZM, can be seen as relevant in the search of low-cost alternative treatments to face environmental pollution caused by this emerging contaminant., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Instability is a key challenge for current pH sensors in practical applications, especially in aquatic environments with high biomass and redox substances. Herein, we present a novel approach that uses a highly stable IrO x sensing layer enveloped in a composite film of SPEEK doped with a silicon-stabilized ionic liquid (SP-IrO x ). This design mitigates drift due to sensitive layer variations and minimizes interference from complex external conditions. After exhibiting robustness under moderately reducing conditions caused by S 2- , I - , and ascorbic acid, the SP-IrO x sensor's efficacy was validated through real-time pH measurements in demanding aquatic settings. These included laboratory algal culture medium, sediment substrates, and mussel aquaculture areas. The sensor sustained accuracy and stability over extended periods of 6-8 days when compared to calibrated commercial electrodes. The deviations from reference samples were minimal, with a variance of no more than 0.03 pH units in mussel aquaculture areas ( n = 17) and 0.07 pH units in an algal culture medium ( n = 37). As a potentiometric, this solid-state electrode features a compact structure and low energy consumption, making it an economical and low-maintenance solution for precise pH monitoring in diverse challenging environments with high biomass and turbidity.

This work describes a reliable, cheap, easy and fast method for analysis of nine bisphenols in mussel samples by gas chromatography-mass spectrometry after trimethylsilylation. The modified method consisted of miniaturized matrix solid phase dispersion (micro-MSPD) in a glass Pasteur pipette using Captiva EMR (enhanced matrix removal)-lipid as the sorbent. Good linearity was obtained in the work range (1-500 μg L -1 ) with a correlation coefficient ( R 2 ) ≥ 0.998. The method accuracy and precision were determined at two concentration levels. The results show recoveries ranging from 55 to 111%. The precision varied from 1.95 to 11.4% (RSD). The whole quantification limits were between 0.056 and 3.42 μg per kg dry weight. The analytical procedure was applied for the analyses of five mussel samples collected from Galician Rias. The major compound was BPA, and wild mussels from Rías de Ferrol, Vigo and A Coruña had the highest levels. The proposed method is suitable for the analysis of BPA and its analogues in mussel samples.

Simultaneously modulating the inflammatory microenvironment and promoting local bone regeneration is one of the main challenges in treating bone defects. In recent years, osteoimmunology has revealed that the immune system plays an essential regulatory role in bone regeneration and that macrophages are critical components. In this work, a mussel-inspired immunomodulatory and osteoinductive dual-functional hydroxyapatite nano platform (Gold/hydroxyapatite nanocomposites functionalized with polydopamine - PDA@Au-HA) is developed to accelerate bone tissues regeneration by regulating the immune microenvironment. PDA coating endows nanomaterials with the ability to scavenge reactive oxygen species (ROS) and anti-inflammatory properties, and it also exhibits an immunomodulatory ability to inhibit M1 macrophage polarization and activate M2 macrophage secretion of osteogenesis-related cytokines. Most importantly, this nano platform promotes the polarization of M2 macrophages and regulates the crosstalk between macrophages and pre-osteoblast cells to achieve bone regeneration. Au-HA can synergistically promote vascularized bone regeneration through sustained release of Ca and P particles and gold nanoparticles (NPs). This nano platform has a synergistic effect of good compatibility, scavenging of ROS, and anti-inflammatory and immunomodulatory capability to accelerate the bone repair process. Thus, our research offers a possible therapeutic approach by exploring PDA@Au-HA nanocomposites as a bifunctional platform for tissue regeneration., (© 2024. The Author(s).)

Bacterial infection is a serious challenge in the treatment of open bone defects, and reliance on antibiotic therapy may contribute to the emergence of drug-resistant bacteria. To solve this problem, this study developed a mineralized hydrogel (PVA-Ag-PHA) with excellent antibacterial properties and osteogenic capabilities. Silver nanoparticles (CNC/TA@AgNPs) were greenly synthesized using natural macromolecular cellulose nanocrystals (CNC) and plant polyphenolic tannins (TA) as stabilizers and reducing agents respectively, and then introduced into polyvinyl alcohol (PVA) and polydopamine-modified hydroxyapatite (PDA@HAP) hydrogel. The experimental results indicate that the PVA-Ag-PHA hydrogel, benefiting from the excellent antibacterial properties of CNC/TA@AgNPs, can not only eliminate Staphylococcus aureus and Escherichia coli, but also maintain a sustained sterile environment. At the same time, the HAP modified by PDA is uniformly dispersed within the hydrogel, thus releasing and maintaining stable concentrations of Ca 2+ and PO 4 3- ions in the local environment. The porous structure of the hydrogel with excellent biocompatibility creates a suitable bioactive environment that facilitates cell adhesion and bone regeneration. The experimental results in the rat critical-sized calvarial defect model indicate that the PVA-Ag-PHA hydrogel can effectively accelerate the bone healing process. Thus, this mussel-inspired hydrogel with antibacterial properties provides a feasible solution for the repair of open bone defects, demonstrating the considerable potential for diverse applications in bone repair., Competing Interests: Declaration of competing interest The authors declare that they have no other competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)