Search

Background Progress in the field of microsurgery allows more detailed reconstructions of the smallest tissue structures. The applied instruments are left with biological residues after coming into contact with body fluids or tissue, leading to compromised surgical precision. Designing of residue-free innovative instruments would reduce the necessity of subsidiary practices and would improve the surgical precision. Methods We designed a ceramic coating (Lotus ceramic coating system 26—LCC-26) that exhibits self-cleaning surface properties on coated titanium specimens. A titanium surface was modified by blasting technology and electropolishing, followed by applying a high-performance ceramic and sol-gel finish layer. The physical surface characterization was performed by scanning electron microscopy and measuring the contact angle. The cell-repellent properties and cytotoxicity were investigated using live-dead staining, BrdU, and lactate dehydrogenase assay. Furthermore, bacterial and fluid-adhesion tests were performed. Finally, blood compatibility was analyzed according to DIN ISO 10993. Results The composite system LCC-26 increased the hydrophobic character of the titanium surface (the water contact angle of 74.9 degrees was compared with 62.7 degrees of the uncoated native titanium; p Conclusion Titanium surface modification on surgical instruments exhibits cell, bacteria, and blood-repellent properties with a full guarantee of cyto- and hemocompatibility. Thus, innovatively coated instruments could contribute to increased precision during microsurgical interventions and optimized medical operation routines in the future.

Background The aim of this study was to analyze the long-term outcomes of extensor tendon ruptures of the knee using exact measuring tools. Methods The results of patients treated for extensor tendon rupture with a minimum follow up of 10 years were reviewed. Electromyography (EMG) and three-dimensional (3D) gait analyses were performed and compared with the healthy side of each patient and with the gait patterns of 20 healthy controls. Functional outcome scores were assessed using the Lysholm score and Knee Injury and Osteoarthritis Outcome Score (KOOS). Results After a mean of 13.4 ± 3 years, 23 patients were available for follow up. The mean Lysholm score was 86.6, and the KOOS averaged 78.1. Gait analysis showed no major kinematic differences between these patients compared with healthy controls. In the squat test, the mean peak amplitude of the rectus femoris muscle was significantly smaller on the injured side than on the healthy side (140.21 ± 66.13 μV vs. 168.25 ± 91.77 μV; P = 0.01). The mean peaks of the vastus lateralis and medialis EMG signals were also lower on the injured side (P = 0.63; P = 0.08). Correspondingly, the thigh girth at 20 cm and 10 cm above the knee was significantly lower on the injured side. One patient had re-rupture after patella tendon repair. Conclusion At long-term follow up the patients reached good clinical outcomes and exhibited mainly physiological gait patterns after rupture of knee extensor tendons. However, the thigh muscles showed hypotrophy and a significantly smaller EMG signal amplitude during a high-intensity task on the formerly injured side.

Purpose The aim of this study was to analyze the outcomes of anatomical repair and ligament bracing for Schenck III and IV knee dislocation (KD). Methods The results of 27 patients (15 and 12 cases of Schenck III and IV KD, respectively) after a mean follow-up of 18.1 ± 12.1 months (range 6–45 months) were retrospectively reviewed. Twenty-two patients suffered high-kinetic-energy accidents, whereas five patients suffered ultralow-velocity (ULV) trauma due to obesity. The outcome measures were the Lysholm score, Hospital for Special Surgery (HSS) knee score, Knee Society Score (KSS), Knee Injury and Osteoarthritis Outcome Score (KOOS) and Short Form 36 (SF-36) score. A kinematic 3D gait analysis with five walking trials was performed to compare the patients and healthy controls. Results The mean KSS, HSS score, Lysholm score, and KOOS were 77.4 ± 14.4, 84.6 ± 11.2, 81.5 ± 10.4, and 67.3 ± 16.8, respectively. No intra- or postoperative complications occurred. The mean range of motion deficiency compared to the healthy side was 24.4 ± 18.5°. Ten patients had first-degree residual laxity of the anterior cruciate ligament; 12 and 2 patients had first- and second-degree residual laxity of the collateral ligament, respectively. Five patients underwent additional arthroscopic arthrolysis due to arthrofibrosis at an average of 6.2 ± 1.9 months (range 4–9 months) after the initial surgery. The 3D gait analysis showed no major differences in joint stability or movement between the patients and healthy controls. Only the ULV trauma patients had significantly lower outcome scores and showed larger kinematic deviations in joint movement during the gait analysis. Conclusion Anatomical repair with ligament bracing is a suitable surgical procedure in the treatment of KD and provides evidence in clinical practice with the benefit of early, definitive repair and preservation of the native ligaments. Patients reach acceptable subjective and objective functional outcomes, including mainly normalized gait patterns during short-term follow-up, with only minor changes in kinematics and spatial–temporal characteristics. Obese patients who suffered ULV trauma showed significantly inferior outcomes with larger deviations in joint kinematics. Level of evidence Level III.

Inhalation of ZnO particles can cause inflammation of the airways and metal fume fever. It is unclear if different sizes of the particles alter these effects. However, various studies report higher biological activity of other nano-sized particles compared to microparticles. No effects at all were observed after inhalation of micro- and nano-sized zinc oxide (ZnO) particle concentrations of 0.5 mg/m3. Studies with different particle sizes of ZnO at higher exposures are not available. Accordingly, we hypothesized that inhalation of nano-sized ZnO particles induces stronger health effects than the inhalation of the same airborne mass concentration of micro-sized ZnO particles. 16 healthy volunteers (eight men, eight women) were exposed to filtered air and ZnO particles (2.0 mg/m3) for 2 h (one session with nano- and one with micro-sized ZnO) including 1 h of cycling at moderate workload. Effect parameters were symptoms, body temperature, inflammatory markers in blood and in induced sputum. Induced sputum was obtained at baseline examination, 22 h after exposure and at the end of the final test. The effects were assessed before, immediately after, about 22 h after, as well as two and three days after each exposure. Neutrophils, monocytes and acute-phase proteins in blood increased 22 h after micro- and nano-sized ZnO exposure. Effects were generally stronger with micro-sized ZnO particles. Parameters in induced sputum showed partial increases on the next day, but the effect strengths were not clearly attributable to particle sizes. The hypothesis that nano-sized ZnO particles induce stronger health effects than micro-sized ZnO particles was not supported by our data. The stronger systemic inflammatory responses after inhalation of micro-sized ZnO particles can be explained by the higher deposition efficiency of micro-sized ZnO particles in the respiratory tract and a substance-specific mode of action, most likely caused by the formation of zinc ions. Electronic supplementary material The online version of this article (10.1007/s00204-020-02923-y) contains supplementary material, which is available to authorized users.

Background This study presents a new technique for assembling an all-suture anchor from existing medical products. The biomechanical characteristics of this self-made anchor (SMA) are compared with those of an industrially manufactured all-suture anchor. Methods The SMAs were made from established medical products (FiberWire #2 and 2-mm FiberTape; Arthrex, Naples, FL, USA). Pretesting was performed in biphasic polyurethane foam blocks. In the next step, 10 SMAs and 10 industrially made anchors (IMAs; 1.8-mm double-loaded Y-Knot Flex all-suture anchor; ConMed Linvatec, Largo, FL, USA) were applied with an insertion tool and tested in fresh porcine femora using a servohydraulic testing system, with a preload of 10 N and a displacement rate of 12.5 mm/s. Pullout strength and failure mode were recorded. Results The mean load at failure in the foam blocks was 459 ± 124 N in the SMA group and 538 ± 83 N in the IMA group. In porcine bone, failure occurred at 461 ± 102 N in the SMA group and 431 ± 135 N in the IMA group. The differences in pullout strength between the 2 types of anchor were not statistically significant, either in the foam blocks (P = .17) or in porcine bone (P = .62). Conclusion A handmade all-suture anchor using 2 high-strength sutures woven into a 2-mm strip of high-strength tape did not show statistically different failure loads in polyurethane foam or in porcine metaphyseal bone in comparison with a commercially produced double-loaded all-suture anchor. The principal mode of failure in porcine bone in both groups was anchor pullout.

Ziel dieser Untersuchung war es, verschiedene Messgeräte und Analysentechniken zur Ermittlung der Stickoxidkonzentrationen (NOx-Konzentrationen) so zu vergleichen, wie sie zurzeit in Messstellen eingesetzt werden. Dazu wurden sie verschiedenen Prüfgaskonzentrationen ausgesetzt, die sich an den aktuellen Arbeitsplatzgrenzwerten (AGW) orientierten. Ein Nebenaspekt betraf NOx-Prüfgase aus Druckgasflaschen, um Aussagen zur Abweichung zwischen Soll- und Istwerten zu treffen. Zum Einsatz kamen mehrere Chemolumineszenz-Analysatoren, direktanzeigende Warngeräte auf Basis elektrochemischer Sensorik und elektrochemische Sensorelemente, die nicht in einem Gerät verbaut waren. Die Vergleichsmessungen fanden 2019 im Institut für Prävention und Arbeitsmedizin der Deutschen Gesetzlichen Unfallversicherung (IPA) statt. Während die Messergebnisse der Chemolumineszenz-Geräte geringe Abweichungen zeigten, ergaben sich bei den elektrochemischen Sensoren teilweise erhebliche Spannbreiten. Die Messergebnisse der Warngeräte können als orientierende Konzentrationsbestimmungen im AGW-Bereich verwendet werden. Zusätzlich wurde gezeigt, dass die gemessenen NOx-Konzentrationen der Prüfgasflaschen teilweise deutlich von den zertifizierten Werten abwichen.

In clinical practice, even when the fixator is locked, a noticeable laxity of the construct can be observed. This study was designed to measure the stiffness of the fixator and to analyze the movements of the osteotomy site. Furthermore, the effect of three additional longitudinal rods on the locking of the construct was analyzed.Five synthetic tibia/fixator models (Model A) were tested under rotational torque (40 Nm) and axial compression (700 N). Three additional rigid rods were subsequently mounted, and the tests were repeated (Model B). The movements of the fixator as well as the osteotomy site were registered by a digital optical measurement system. Load- deformation curves, and so stiffness of the models, were calculated and compared.Under rotational and axial loadings, Model A was found to be less rigid than Model B (p = 0.034; p = 0.194). Notably, Model A showed a region of laxity around neutral rotational (ΔF = 5 Nm) and axial (ΔF = 16.64 N) loading before a linear deformation trend was measured. Concomitantly, greater osteotomy site movement was measured for Model A than for Model B under full loading (p = 0.05) and within the region of increased laxity (p = 0.042).The fixator showed an element of laxity around neutral axial and rotational loading, which transferred to the bone and led to a notable amount of osteotomy gap movement. Mounting three additional rods increased the stiffness of the construct and therefore reduced the movement of the osteotomy site.

In this study, 24 subjects (20-58 years) were exposed to carbon dioxide (CO2 ) at 770 ppm and 20 000 ppm in an exposure laboratory for 4-h, including 2 × 15 min of cycling to investigate the effects on acid-base balance, physiological responses, cognitive performance and acute health. Capillary blood analysis, heart rate, respiratory rate, divided attention, flexibility, and sustained attention from the Test Battery for Attentional Performance (TAP), critical flicker fusion frequency (CFF), and self-reported symptoms were measured before, during, and after the 4-h exposure. Blood pH decreased and partial pressure of carbon dioxide (pCO2 ) increased significantly when exposed to 20 000 ppm CO2 compared to 770 ppm. However, the values remained within the normal range. In addition, respiratory rate increased slightly but significantly at 20 000 ppm CO2 . No significant changes in heart rate, CFF, task performance or acute health were found. In sum, the findings suggest that the observed changes in acid-base balance and ventilation can be classified as physiological adaptation responses. Impairment of cognitive performance is not expected from exposure to 20 000 ppm CO2 , neither as direct effect on central nervous system function nor as a distraction related to perception of health effects.

Occupational exposure limits (OELs) are derived for protection from health hazards, assuming that exposed subjects are healthy adult workers. Whether differences in susceptibility to sensory irritation effects from airborne chemicals have to be taken into account is currently under discussion. Thus, we chose atopics as a healthy but possibly susceptible subpopulation that can be identified with a clinical test. To investigate the influence of sex or atopy on sensitivity to airborne chemicals, 22 subjects were exposed for 4 h to ethyl acrylate at three concentrations: 0.05 ppm (odor threshold; sham), 5 ppm (constant), and varying exposure between 0 and 10 ppm. Odor intensity decreased and eye irritation ratings increased in a dose-dependent manner, reflecting the time course of the exposure scenarios. The reports of moderate-to-strong eye irritation were verified by significant increases in eye blink frequency. Our results show that women reported subjective eye irritation to an increasing degree. However, these sex-related differences in ratings could not be verified by objective assessment of eye blink frequency. Atopic subjects reported higher odor intensity than non-atopic subjects, but only during the sham (odorous but not irritating) exposure condition. Differences in ratings on annoyance, and eye or nose irritation were not found. Furthermore, the study revealed that atopic subjects might belong to a group of subjects with frequent eye blink activity. Although the relative increase in blink rates was more pronounced in non-atopic subjects, atopic subjects had significant higher blink rates at the end of the exposure to varying ethyl acrylate concentrations. Our results do not support that atopy enhances chemosensory effects if only the increase of blink rates and not the absolute height are considered as adverse effect. Nevertheless, the results indicate that individuals with frequent eye blink activity should be distinguished from those with normal eye blink activity while investigating blink rates as objective parameter of eye irritation.

Study Design: Retrospective observational study. Objectives: To analyze the clinical and radiological outcomes of lower limb fractures following surgical treatment in patients with chronic spinal cord injury (SCI). Methods: Between January 2003 and December 2015, 102 chronic SCI patients with a lower limb fracture were surgically treated at our hospital. A total of 58 patients met the inclusion criteria and were recruited for final analysis. Patients with 2-stage procedure or incomplete clinical records with lost-to-follow-up were excluded from the study. Patients were divided into 2 groups (group 1= internal fixation; group 2 = external fixation). Primary outcome measures were to identify the number of nonunions via Kaplan-Meier analysis and the time to bone consolidation. The diagnosis of a pseudarthrosis was made after more than 180 days of consolidation time. Considering the Kaplan-Meier analysis, pseudarthrosis was interpreted as treatment failure. Secondary outcome measure was to evaluate the complication rate with special focus on heterotopic ossification. Results: A total of 58 chronic SCI patients with closed bone fractures were included in this study. Fifty-two fractures (88%) were simple and 7 (12%) were complex (type C) fractures according to AO classification. The majority of patients (34 cases, 59%) developed femur fractures followed by 24 tibial fractures (41%). Seventeen patients received an external (29%) and 41 an internal fixation (71%). Bone consolidation was reported in 31 patients (53%) with a mean time interval of bone consolidation after 97 days (range from 45 to 160 days; SD = 30). The reported nonunion (pseudarthrosis) rate was 47%. Comparing the internal group (n = 15 patients) versus the external group (n = 14), we could not find any significant difference ( P = .939) concerning the bone consolidation time. The Kaplan-Meier analysis showed a 75% cumulative survivorship at 120 days (internal group) versus 111 days (external group). Most common postoperative complications occurred in the internal fixation group with Wound infections being predominantly observed (10%), followed by heterotopic ossifications (8%). Conclusions: Our results show that surgical treatment of lower limb fractures in chronic SCI patients is a challenging treatment with a high pseudarthrosis rate in both groups. The complication rate seems to be lower in the patients treated with external fixation. As a clinical recommendation, longer implants should be used for a stable osteosynthesis since SCI patients seem to have a higher load on the osteosynthesis material due to missing sensomotoric feedback.

Titanium is one of the most commonly used materials for implants in trauma applications due to its low density, high corrosion resistance and biocompatibility. Nevertheless, there is still a need for improved surface modifications of Titanium, in order to change surface properties such as wettability, antibacterial properties or tissue attachment. In this study, different novel plasma electrolytic oxidation (PEO) modifications have been investigated for tendon adhesion to implants commonly used in hand surgery. Titanium samples with four different PEO modifications were prepared by varying the electrolyte composition and analyzed with regards to their surface properties. Unmodified titanium blanks and Dotize® coating served as controls. Samples were examined using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), contact angle measuring system and analyzed for their biocompatibility and hemocompatibility (according to DIN ISO 10993-5 and 10,993–4). Finally, tendon adhesion of these specific surfaces were investigated by pull-off tests. Our findings show that surface thickness of PEO modifications was about 12–20 μm and had porous morphology. One modification demonstrated hydrophilic behavior accompanied by good biocompatibility without showing cytotoxic properties. Furthermore, no hemolytic effect and no significant influence on hemocompatibility were observed. Pull-off tests revealed a significant reduction of tendon adhesion by 64.3% (35.7% residual adhesion), compared to unmodified titanium (100%). In summary, the novel PEO-based ceramic-like porous modification for titanium surfaces might be considered a good candidate for orthopedic applications supporting a more efficient recovery.

Introduction Among the few techniques described for the treatment of coronoid fractures, osteosynthesis techniques include screw osteosynthesis from anterior to posterior (AP) or from posterior to anterior (PA) and plate osteosynthesis. The aim of this study was to test the biomechanical stability of screw osteosynthesis and plate osteosynthesis using anatomical plates in coronoid process fractures. Materials and methods On a total of 25 biomechanical synthetical ulnae, a coronoid shear fracture including 70% of the coronoid height was simulated. Osteosynthesis was then performed using two 2.7 mm screws from anterior, posterior and with use of three different anatomical plates of the coronoid process. For the biomechanical testing, axial load was applied to the fragment with 1000 cycles from 5 to 250 N, load to failure and load at 100 µm displacement. Displacements were measured using a point-based three-dimensional motion analysis system. Results Osteosynthesis using the PA-screw showed significant more displacement during cyclic loading compared with all other osteosyntheses (0.99 mm), whereas AP-screw showed the smallest displacement (0.10 mm) during cyclic loading. The PA-screw technique showed a significant lower load to failure compared to all other osteosynthesis with the highest load in AP-screw osteosynthesis. The load for 100 µm displacement was the smallest in PA-screw with a significant difference to the AP-screw and one plate osteosynthesis. Conclusion Osteosynthesis of large coronoid shear fractures with two small-fragment screws from anterior allows stable fixation that is not inferior to anterior plate osteosynthesis and might be an alternative in specific fracture types. Posterior screw fixation was found as the weakest fixation method. Level of evidence Basic science study

Background Exposure to airborne zinc oxide (ZnO) particles occurs in many industrial processes, especially in galvanizing and welding. Systemic inflammation after experimental inhalation of ZnO particles has been demonstrated previously, but little is known about the impact on the cardiovascular system, particularly on the autonomic cardiac system and the risk of arrhythmias. In this study we investigated the short-term effects of ZnO nanoparticles on heart rate variability (HRV) and repolarization in healthy adults in a concentration-dependent manner at rest and during exercise in a controlled experimental set-up. Methods Sixteen healthy subjects were exposed to filtered air and ZnO particles (0.5, 1.0 and 2.0 mg/m3) for 4 h, including 2 h of cycling at low workloads. Parameters were assessed before, during, immediately after, and about 24 h after each exposure. For each subject, a total number of 46 10-min-sections from electrocardiographic records were analyzed. Various parameters of HRV and QT interval were measured. Results Overall, no statistically significant effects of controlled ZnO inhalation on HRV parameters and QT interval were observed. Additionally, a concentration-response was absent. Conclusion Inhalation of ZnO nanoparticles up to 2.0 mg/m3 for 4 h does not affect HRV and cardiac repolarization in healthy adults at the chosen time points. This study supports the view that cardiac endpoints are insensitive for the assessment of adverse effects after short-term inhalation of ZnO nanoparticles.

Inhalation of high concentrations of zinc oxide (ZnO) particles may cause metal fume fever. A useful tool to characterize the reactivity of innate immune cells of an individual, e.g., after in vivo exposure, is the whole blood assay (WBA). The measurable outcome of WBA is the release of cytokines, especially pro-inflammatory and pyrogenic cytokines induced by stimulation in vitro. The aim of the study was to evaluate whether inhalation of nano-sized zinc oxide particles modifies the results of WBA from healthy blood donors. Sixteen healthy subjects were exposed to filtered air and ZnO particles (0.5, 1.0, and 2.0 mg/m

Workers in the zinc processing, for example, welding or hot-dip galvanizing, are exposed to aerosols consisting of particles and gases, including zinc oxide (ZnO), which can affect human health. In this study, we addressed the effects of short-term controlled exposure to nano-sized ZnO on the airway inflammatory markers in healthy volunteers. To this end, we determined the influence of ZnO inhalation on the content of zinc and biomarkers (leukotriene B4 (LTB4), peptide leukotrienes (LTC4/D4/E4), 8-iso-PGF2α, pH, and prostaglandin E2 (PGE2)) in exhaled breath condensate (EBC). Sixteen non-smoking subjects (8 females, 8 men) were exposed to filtered air (sham) or ZnO nanoparticles (0.5, 1.0, and 2.0 mg/m3) for 4 h. EBC samples were collected according to specific study design. We found that the peptide leukotrienes were below the limit of quantification (LOQ) in all the EBC samples. ZnO exposure showed no detectable effect on any other parameters investigated when comparing the two groups. The content of Zn in EBC was unaffected by ZnO inhalation at any concentration used. Therefore, we conclude that the evaluation of Zn and biomarker content in EBC would not be a suitable way to assess the exposure to inhaled ZnO.

Background The aim of this biomechanical study was to compare 2 surgical techniques for the reconstruction of large, combined, uncontained glenoid defects with reversed shoulder arthroplasty (RSA). Methods Three groups of scapulae with RSA were tested by the application of a physiological combination of compressive/shear loads in Sawbones (Pacific Research Laboratories, Inc., Vashon Island, WA, USA) and cadavers. Two of the groups (both Sawbones and cadaveric specimens) consisted of anterior combined defects (14 mm in depth), and the third group served as a control group (only Sawbones specimens). The first group with an anterior combined defect was reconstructed with anterior bone grafts to contain the defect and cancellous bone to fill the central defect before RSA with partial bony joint line reconstruction (p-BJR). In the second group with an anterior combined defect, the dorsal rim was reamed and the joint line was reconstructed with a bone disc fully covering the peg. This total BJR (t-BJR) corresponds to the technique of bony-increased-offset–RSA (BIO-RSA). Results At 150 µm of displacement, the loadings in the inferior-superior (IS) direction were significantly more stable than those in the anterior-to-posterior (AP) direction within both reconstructed defect groups (P ≤ .002). In contrast, no significant differences were found between the partial BJR and t-BJR group in either direction (Sawbones: AP: P = .29; IS: P = .44; cadavers: AP: P = .67; IS: P = .99). The control group revealed significantly higher values in all loadings of the IS direction and significantly higher loadings at 40 µm and 150 µm in the AP direction. Conclusion Both techniques could be applied for such complex defects provided that there is sufficient medial bone stock for a t-BJR. Significantly greater stability was found in the IS direction than in the AP direction within each group, which could be explained by the longer screw anchoring within the superior and inferior columns. Both defect groups were less stable than the group of intact glenoids.

Background Workers in the zinc production and processing of galvanized sheet steel are exposed to a complex mixture of particles and gases, including zinc oxide (ZnO) that can affect human health. We aimed to study the effects of short-term controlled exposure to nano-sized ZnO on airway inflammatory markers in healthy volunteers. Methods Sixteen subjects (8 females, 8 men; age 19–42, non-smokers) were exposed to filtered air and ZnO nanoparticles (0.5, 1.0 and 2.0 mg/m3) for 4 h, including 2 h of cycling with a low workload. Induced sputum samples were collected during a medical baseline and a final examination and also about 24 h after each exposure. A number of inflammatory cellular and soluble markers were analyzed. Results Frequency and intensity of symptoms of airway irritation (throat irritation and cough) were increased in some subjects 24 h after ZnO exposures when compared to filtered air. The group comparison between filtered air and ZnO exposures showed statistically significant increases of neutrophils and interleukin-8 (IL-8), interleukin-6 (IL-6), matrix metalloproteinase (MMP-9) and tissue inhibitors of metalloproteinases (TIMP-1) in sputum starting at the lowest ZnO concentration of 0.5 mg/m3. However, a concentration-response relationship was absent. Effects were reversible. Strong correlations were found between neutrophil numbers and concentrations of total protein, IL-8, MMP-9, and TIMP-1. Conclusions Controlled exposures of healthy subjects to ZnO nanoparticles induce reversible airway inflammation which was observed at a concentration of 0.5 mg/m3 and higher. The lack of a concentration-response relationship warrants further studies.

The Hybrid Assistive Limb Lumbar Type (HAL) is an active exoskeleton that provides motion according to the wearer’s voluntary drive. It was developed to support back muscles during repetitive lifting tasks. The purpose of this paper was to determine if the myoelectric activity of the back muscles is reduced or altered when using the HAL and to investigate a possible influence of its use on the cardiovascular system. Fourteen healthy young men without lower back pain underwent a freestyle, symmetrical-lifting protocol. Participants lifted a 17.05 kg handled-box for 10 min. with and without HAL support. Surface electromyography (sEMG) signals were recorded at thoracic (TES) and lumbar erector spinae (LES) and quadriceps femoris (QF). Heart rate was recorded from electrocardiogram. The subjects rated their level of physical exertion using the Borg Rating of Perceived Exertion (BORG) scale. Additionally they commented on sites of discomfort, perceptions of force, and loss of range of motion. The root mean square and integrated sEMG value was significantly reduced at the LES and TES. Heart rate variability output variables did not show any significant difference. The BORG-Scale showed no difference, with a mean score of 2.5. The HAL decreased the magnitude and onset of muscle activity and force in the lower back in a repetitive lifting task. Reduction of the muscle force and activity required during the lifting process is meaningful regarding lower back pain prevention, and the HAL may contribute to reducing the incidence of lower back pain in the working population.

In the EU, there is an increasing need for regulatory agencies to establish health-based threshold limits for airborne particles. A prerequisite for such projects is the validation and comparison of existing and newly developed particle analyzers. Corresponding proficiency tests have often been conducted with the help of inter-laboratory tests using test aerosols. Although test aerosols in the micro- and the nanoscale range were produced with different generator systems at the technical center of the Institute for the Research on Hazardous Substances (IGF) in Dortmund, a stable and reproducible method of producing a low number concentration for nano-sized particles was not achieved. Inspired by a method of monodisperse droplet generation, we coupled a flame generator with a droplet generator and examined the concentration and the diameter of the formed particles as a consequence of the precursor concentration and the droplet frequency. In addition, the reproducibility of the method was tested daily, and the nanoparticles were collected and characterized microscopically. Finally, the measurements of the particle size distribution were mathematically examined. The resulting fits enable the prediction of the median particle diameter as a function of the precursor concentration and the frequency of the droplets. Overall, the performed experiments confirm that this system meets all the requirements with regard to a low number concentration and long-term stability and reproducibility and should therefore be suitable for further inter-laboratory round robin tests.

Background fMRI experiments on olfaction offer new insights into the complex, but in contrast to other sensory systems, less studied cognition of odors. To perform these experiments is still a challenge. New method To address the challenge posed by MR settings, an olfactometer design is presented including specific improvements to the limited number of already existing olfactometers. Innovative features such as pneumatically controlled pinch valves, useable in the scanner and providing exact stimulus timing as well as a 3D-printed nasal mask inlet for common sleep laboratory masks that can be used for lateral divided stimulus presentation are introduced. To ensure a fully automated and mobile system, the use of a flexible and easily-adapted Matlab-Code and a portable adaptable container system are presented. Results The functional efficiency of these features are proven by results of an fMRI study as well as testing temporal resolution and concentration stability with a mass spectrometer. Comparison with existing methods The 24-channel olfactometer design presented here provides an inexpensive alternative to the currently available olfactometers including the achievement of fast onset times, lateral divided stimulus presentation and high flexibility and adaptability to different scientific questions. Conclusion The olfactometer design presented in this paper can be seen as a realistic and feasible solution to overcome the challenges of presenting olfactory stimuli within the MR setting.

A large number of occupational exposure limit values (OELs) are based on avoiding of sensory irritation of the eyes and the upper respiratory tract. In order to investigate the chemosensory effect range of a chemical, odor and sensory irritation thresholds (lateralization thresholds, LTs) can be assessed. Humidity affects olfactory function and thus influences odor thresholds; however, a similar effect has not been shown for sensory irritation thresholds. The purpose of the present study was to explore whether LTs for ammonia vapor vary depending on the water vapor content of the inspired stimulus. Eight healthy nonsmoking volunteers were simultaneously exposed to ammonia vapor through one nostril and clean air through the other and were asked to determine which nostril received the chemical. Within experimental runs, ascending ammonia concentrations (60–350 ppm) that were either dry or humidified were administered at fixed time intervals. Geometric mean LTs obtained at wet (181 ppm) or dry (172 ppm) conditions did not differ significantly (P= 0.19) and were within the range of those reported by previous studies. These results suggest that humidity is not a critical factor in determining sensory irritation thresholds for ammonia, and future studies will examine if these findings are transferable to sensory irritation thresholds for other chemicals.

Potash miners can become exposed to carbon dioxide (CO

Background Inhalation of high concentrations of zinc oxide particles (ZnO) may cause metal fume fever. In an earlier human inhalation study, no effects were observed after exposure to ZnO concentrations of 0.5 mg/m3. Further data from experimental studies with pure ZnO in the concentration range between 0.5 and 2.5 mg/m3 are not available. It was the aim of this experimental study to establish the concentration-response relationship of pure nano-sized ZnO particles. Methods Sixteen healthy subjects were exposed to filtered air and ZnO particles (0.5, 1.0 and 2.0 mg/m3) for 4 h on 4 different days, including 2 h of cycling with a low workload. The effects were assessed before, immediately after, and about 24 h after each exposure. Effect parameters were symptoms, body temperature, inflammatory markers and clotting factors in blood, and lung function. Results Concentration-dependent increases in symptoms, body temperature, acute phase proteins and neutrophils in blood were detected after ZnO inhalation. Significant effects were detected with ZnO concentrations of 1.0 mg/m3 or higher, with the most sensitive parameters being inflammatory markers in blood. Conclusion A concentration-response relationship with nano-sized ZnO particles in a low concentration range was demonstrated. Systemic inflammatory effects of inhaled nano-sized ZnO particles were observed at concentrations well below the occpational exposure limit for ZnO in many countries. It is recommended to reassess the exposure limit for ZnO at workplaces.

Potash miners can become exposed to carbon dioxide (CO2) during the blasting of basalt intrusions or loading and transporting the blasted salt. In a cross-shift study, we compared physiological effects of acute exposure to elevated CO2 concentrations in miners after long-term exposure to evaluate the possible health risks. A group of 119 miners was assessed by clinical examination, lung function tests, and blood gas content directly before and after the shift. A cumulative CO2 exposure was measured using personal monitors. The miners were categorized as low ( 0.5 vol.%, n = 10) CO2 exposed subjects. We found no significant differences among the three groups. Lung function testing revealed no conspicuous findings, and chronic health effects were not observed in the miners either. In conclusion, no significant adverse effects could be found in potash miners exposed to elevated CO2 concentrations. Therefore, the mining authorities allow potash mining operations for 4 h at ambient CO2 up to 1.0 vol.% and for 2 h at CO2 not exceeding 1.5 vol.% per shift.

There is an interest in assessing changes in nasal NO (nNO) levels as an effect marker of upper airways. In this study, we examined methodologic influences on short and long term repeatability of nNO levels assessed by a portable electrochemical analyzer. Nine atopic and eighteen healthy subjects were exposed for 4 h to ethyl acrylate concentration of 0.05 ppm (sham) and mean concentrations of 5 ppm (either constant 5 ppm or variable 0 to 10 ppm). Sampling of nNO was performed by using passive aspiration during both breath-holding (634 ppb) or calm tidal breathing (364 ppb, p < 0.0001). The intra-session (between-session) repeatability in terms of coefficient of variation was 16.4% (18.5%) using the tidal-breathing and 8.6% (13.0%) using the breath-holding method, respectively. Atopic subjects demonstrated a significant increase in nNO (breath-holding mean 16%, tidal-breathing mean 32%) after applying a constant ethyl acrylate concentration (5 ppm). Our findings suggest that the less elaborate tidal-breathing method might be sufficient to detect significant changes at a group level. Given a lower coefficient of variation of breath-holding we assume there is an advantage of that approach at an individual level. Further research is needed to validate the usefulness of nNO in the evaluation of irritative, non-allergic responses.

Many institutions' retrospective studies investigated the effect of the timing of surgery on outcomes of polytraumatized patients with severe lesions of the thoracic spine and mainly found a better outcome for patients who were operated on less than 72 hours posttrauma.We conducted a prospective study in a Level I trauma center to validate the retrospective data and to investigate other variables, in addition to the timing of surgery that may influence patient outcomes.Prospective observational clinical study.Within this prospective study at a Level I trauma center, we enrolled 38 multiple injured patients with unstable fractures of vertebral column from Level Th1 to L1. Further inclusion criteria consisted of an injury severity score of 16 or more and an intensive care unit (ICU) stay of more than 7 days. The age of included patients was limited from 16 or more to 75 or less years.Hospital stay, stay on ICU, and mortality.Twenty-two patients were operated on less than or equal to 72 hours posttrauma, and 16 received late surgery greater than or equal to 72 hours posttrauma.Patients who received early surgery had a significantly higher mortality rate (p.01) than those who received late surgery. Sixty-seven percent of our patients who had an initial hemoglobin (Hb) less than 10 mg/dL died. Seventy-five percent of those patients who had an Hb less than 10 mg/dL and received a thoracic drain died.Although some reports indicate advantages for early surgery for thoracic spine trauma in the polytraumatized patient, careful patient selection should be used. Based on the results of this prospective study, early surgery for thoracic spine trauma in patients with concomitant severe thoracic trauma and low initial Hb levels may pose a risk for poor clinical outcomes.

Background How the shape of the glenoid defect being reconstructed influences stability in reversed shoulder arthroplasty has never been evaluated. The purpose of this study was to compare the reconstruction of two different shaped defects in reversed shoulder arthroplasty. Methods Two groups (ten Sawbone scapulae each) of oblique- and rectangular-shaped glenoid defects were tested biomechanically. On the anterior half of the glenoid, bony defects (rectangular and oblique shaped) were prepared and reconstructed subsequently with a graft and reversed shoulder arthroplasty. As a control group, Sawbones without glenoid deficiency were used. In addition, these tests were reproduced in cadavers. Findings In Sawbones, no significant difference in initial stability was found between the two groups ( p > 0.05). Additionally, in the cadaver tests no significant difference was found between the groups with different defects ( p > 0.05). During the preparation, macroscopic loosening of the oblique bone grafts was found in three cases after the performance of the reversed shoulder arthroplasty due to the lack of medial support. The localization of the highest micromotion were measured primarily between the scapula bone and the graft compared to the measured micromotions between glenoid implant and the graft. Interpretation If the oblique-shaped bone graft was secured under the baseplate, the rectangular defect preparation did not show a significantly higher primary stability. However, the advantage of medial support in rectangular defects leads to more stability while placing the bone graft and baseplate during the surgical technique and should therefore be considered a preferable option.

Acute effects of ethyl acrylate exposure at 5 ppm for 4 h include changes of pH in exhaled breath condensate (EBC-pH) and exhaled nitric oxide (FeNO). So far, few data have been reported for atopic persons or the impact of the exposure conditions on biomarkers, e.g., constant versus variable application of irritants. Nine atopic and eighteen healthy volunteers without bronchial hyperresponsiveness were exposed for 4 h to ethyl acrylate concentrations of 0.05 ppm (sham), 5 ppm (constant concentration), and 0–10 ppm (variable, mean concentration of 5 ppm) in an exposure laboratory. A positive atopic status was defined according to specific IgE concentrations to common inhalant allergens (sx1 ≥ 0.35 kU/L). Biomarker levels were assessed before and after challenge and adjusted for levels after sham exposure (net response). Ethyl acrylate at constant, but not at variable concentrations induced a significant change in the net responses of EBC-pH and FeNO. Concerning FeNO, this could be observed only for atopic persons. The changes of biomarker levels were related to their baseline values. Biomarker responses to challenge with ethyl acrylate may be influenced by the patterns of application as well as baseline airway inflammation and atopic status of the volunteers.

Challenge studies in humans have shown considerable interindividual variability in pulmonary impairment across ozone exposure.Since previous results suggested effect modulation by neural mechanism, we investigated sensory C-fiber reactivity in relationship to ozone-triggered response pattern.Cough reflex thresholds reflecting C-fiber sensitivity were evaluated by capsaicin single breath dose-response method. Capsaicin concentrations triggering, respectively, two and five or more coughs (C2, C5) were recorded. Sixteen healthy subjects were randomly exposed in an intermittent exercise protocol to ozone concentrations of 240 and 40 ppb (sham exposure). Ozone responsiveness was defined by a decrease in forced expiratory volume in 1 s (FEV(1)) of more than 5%.Based on a dichotomous classification, subjects with enhanced reactivity to ozone had lower cough thresholds than non-responders (C2, p = 0.035; C5, p = 0.086). Over all, we could demonstrate relationships between capsaicin sensitivity and ozone-triggered changes in FEV(1), peak expiratory flow and maximal expiratory flow at 50% vital capacity but not in specific airway resistance.Our results suggest that capsaicin challenge tests might be useful to characterize subjects with enhanced pulmonary function response towards inhalant irritants.

In a potash mine in the center of Germany, stationary measurements 40 cm above ground level have revealed occasional increases in the carbon dioxide (CO2) levels that exceed the 0.5 vol.% German occupational exposure limit (OEL). This study, therefore, aimed to examine the individual exposures of potash miners to CO2 at their underground workplaces. 119 miners were equipped with personal CO2 detectors to log the individual CO2 exposures during underground work. We decided to use electrochemical monitors due to their compactness and minimal mass. Furthermore, generated CO2 measurements with precipitated overshooting and false positive CO2 values were studied using diverse CO2 test gases and different fumigation times. The personal detectors showed short-term CO2 peak exposures at very high concentrations in a limited number of workers. Twenty-two threshold limit value violations were observed according to the present OEL, and the personal CO2 monitoring allowed categorization into three exposure groups, low (n = 83), moderate (n = 26) and high burdens (n = 10) of CO2. The electrochemical sensors used have numerous properties that can potentially influence the assessment of exposures. The current findings suggest that assessing similar exposure scenarios, with respect to elevated and strongly fluctuating CO2 concentrations, the behavior of electrochemical sensors should be taken into consideration.

Ethyl acrylate is an irritant known to affect the upper airways and eyes. An increase of the eye blink frequency in humans was observed during exposure to 5 ppm. Studies on the lower airways are scant and our study objective was the evaluation of pH in exhaled breath condensate (EBC-pH) and nitric oxide in exhaled breath (FeNO) as markers of inflammation. Sixteen healthy volunteers were exposed for 4 h to ethyl acrylate at a concentration of 5 ppm and to sham (0.05 ppm) in an exposure laboratory. Clinical irritation symptoms, EBC-pH (at a pCO2 of 5.33 kPa) and FeNO were assessed before and after exposure. Differences after ethyl acrylate exposure were adjusted for those after sham exposure. 5 ppm ethyl acrylate induced clinical signs of local irritation in the nose and eyes, but not in lower airways. Exposure produced a subtle, but statistically significant, decrease in breathing frequency (1 breath/min; p = 0.017) and a lower EBC-pH (by 0.045 units; p = 0.037). Concerning FeNO, we did not observe significant changes compared to sham exposure. We conclude that local effects induced by 5 ppm ethyl acrylate consist of sensory irritation of eyes and nose. In addition, acute ethyl acrylate exposure to 5 ppm resulted in a net decrease of EBC-pH. Whether that can be interpreted in terms of additional lower airway irritation or already inflammatory alterations set in needs further investigations.

Exposures to air contaminants, such as chemical vapors and particulate matter, pose important health hazards at workplaces. Short-term experimental exposures to chemical vapors and particles in humans are a promising attempt to investigate acute effects of such hazards. However, a significant challenge in this field is the determination of effects of co-exposures to more than one chemical or mixtures of chemical vapors and/or particles. To overcome such a challenge, studies have to be conducted under standardized exposure characterization and real time measurements, if possible. A new exposure laboratory (ExpoLab) was installed at IPA, combining sophisticated engineering designs with new analytical techniques, to fulfill these requirements. Low-dose as well as high-dose exposure scenarios are achieved by means of a calibration-gas-generator. Exposure monitoring can be carried out with a high performance real time mass spectrometer and other suitable analyzers (e.g. gas chromatograph). Numerous automated security facilities guarantee the physical integrity of the volunteers, and the waste atmosphere is removed using either charcoal filtration or catalytic post-combustion. Measurements of sulfur hexafluoride, carbon dioxide, aniline and carbon black are presented to demonstrate the performance of the exposure unit with respect to the temporal and spatial stability of generated atmospheres. The variations of generated contents in the atmospheres at steady state are slightly higher than the measurement precision of the analyzers (the typical standard deviation of generated atmospheres is2%). The technical components of ExpoLab and its monitoring systems ensure high quality standards in validity and reliability of generating and measuring exposure atmospheres.

Zusammenfassung Es wird ein Experimentalaufbau zur Anregung und drahtlosen Messung von Schwingungen einer teilweise in einen künstlichen Oberschenkelknochen einzementierten Hüftprothese vorgestellt. Um das dynamische Verhalten des mechanischen Systems zu diskutieren, wurde ein translatorisch-rotatorisches Netzwerkmodell erstellt. Mit diesem Modell werden die Eigenfrequenzen des Femur-Prothesen-Verbundes berechnet.

A new solution for the integration of a wireless measurement system intended for the detection of hip prosthesis loosening by vibration analysis is presented. Small vibration amplitudes in the presence of noisy sensor signals of the excited prosthesis are measured with a digital lock-in amplifier which is integrated in the prosthesis together with a controller and a passive telemetry working at 125 kHz. The integrated controller receives the necessary reference signal information to synchronize the lock-in amplifier from the external reader station via RF field. Measurements were taken at a bare femur and an artificial thigh where an electrodynamic audio shaker was fixed at or near the inner femur condyle. In order to explain and to predict the natural frequencies a problem oriented one-dimensional mechanical network model was developed.