Search

In this monograph, the potential use of methods based on the Biopharmaceutics Classification System (BCS) framework to evaluate the bioequivalence of solid immediate-release (IR) oral dosage forms containing fexofenadine hydrochloride as a substitute for a pharmacokinetic study in human volunteers is investigated. We assessed the solubility, permeability, dissolution, pharmacokinetics, pharmacodynamics, therapeutic index, bioavailability, drug-excipient interaction, and other properties using BCS recommendations from the ICH, FDA and EMA. The findings unequivocally support fexofenadine's classification to BCS Class IV as it is neither highly soluble nor highly permeable. Further impeding the approval of generic equivalents through the BCS-biowaiver pathway is the reference product's inability to release ≥ 85 % of the drug substance within 30 min in pH 1.2 and pH 4.5 media. According to ICH rules, BCS class IV drugs do not qualify for waiving clinical bioequivalence studies based on the BCS, even though fexofenadine has behaved more like a BCS class I/III than a class IV molecule in pharmacokinetic studies to date and has a wide therapeutic index. [ABSTRACT FROM AUTHOR]

The addition of antioxidants to pharmaceutical products is a potential approach to inhibit nitrosamine formation, particularly in solid oral dosage forms like tablets and capsules. The objective was to assess the effect of ten antioxidants on the permeability of four Biopharmaceutics Classification System (BCS) Class III drugs. Bi-directional drug permeability studies in the absence and presence of antioxidants were performed in vitro across MDCK-II monolayers. No antioxidant increased drug permeability, while the positive control sodium lauryl sulfate always increased drug permeability. Results support that any of the ten antioxidants, up to at least 10 mg, can be added to a solid oral dosage form without modulating passive drug intestinal permeability. Additional considerations are also discussed. [ABSTRACT FROM AUTHOR]

SCIENTIFIC RELEVANCE. Biowaiver is a procedure for establishing the bioequivalence of generic and reference products without in vivo studies. Regulatory requirements for this procedure, as described in a variety of documents, differ in certain features and aspects. These differences need to be analysed.AIM. The aim was to compare international and Russian regulatory approaches to the Biopharmaceutics Classification System-based biowaivers, provide recommendations on comparative dissolution testing, and outline opportunities for streamlining the regulatory framework of the Eurasian Economic Union (EAEU).DISCUSSION. In this article, the authors analyse biowaiver requirements and describe procedures for assessing the permeability and pH-dependent solubility of medicines, comparing dissolution profiles in various media that simulate the gastrointestinal environment, and interpreting test results. This paper shows the role of excipients in the solubility and permeability of an active substance.CONCLUSIONS. The authors recommend a methodological approach to the biowaiver procedure for replacing in vivo bioequivalence studies with in vitro tests under the current EAEU regulatory framework and list the characteristics of medicines that limit the applicability of the procedure. In conclusion, this article provides a rationale for harmonising the existing guidelines and requirements.

Objectives The aims of this study were: (i) to assess the ability of the meropenem screening breakpoint as part of the screening rapid antimicrobial susceptibility testing (sRAST) of EUCAST for the detection of OXA-48 carbapenemase-producing Klebsiella pneumoniae directly from positive blood cultures (BCs); and (ii) to evaluate the inclusion of ertapenem and temocillin discs into the sRAST to enhance the detection of OXA-48-producing isolates. Methods BC bottles were spiked with a total of 117 K. pneumoniae isolates, including 77 previously characterized OXA-48 producers and 40 non-OXA-48 producers. Disc diffusion assays were directly performed from positive BCs with meropenem (10 µg), ertapenem (10 µg) and temocillin (30 µg) discs, and inhibition zones were manually measured after 4, 6 and 8 h of incubation. The screening cut-off values of sRAST were applied to evaluate their capability in detecting OXA-48-producing isolates. Receiver operating characteristic curves were constructed to illustrate the performance efficacy of the disc diffusion assays to detect OXA-48 producers. Results The meropenem cut-off values of sRAST only detected 90.91% of the OXA-48-producing isolates after 6 and 8 h of incubation. With the proposed cut-off points for ertapenem [<19 mm (4/6 h) and <20 mm (8 h)] and temocillin [<10 mm (4 h) and <11 mm (6/8 h)], all OXA-48-positive isolates were detected without any false-positive results at any reading time. Conclusions In healthcare settings with a high prevalence of OXA-48 producers, the inclusion of ertapenem and temocillin discs in the sRAST procedure may improve the detection of OXA-48-producing K. pneumoniae isolates directly from positive BCs, providing reliable results after only a 4 h incubation period. [ABSTRACT FROM AUTHOR]

The aim of this study was to establish the in situ single-pass intestinal perfusion method in rats for intestinal permeability investigation of drug. Effective permeability coefficients (Peff) of 15 model drugs were investigated in rat jejunal. Krebs-Ringer buffer solution containing drug was perfused at flow rate of 0.2 ml/min and samples were taken from outlet up to 110 min, steady state was achieved after 30 min perfusion without samples taken. Gravimetric method was used to correct the net water flux. Drug concentrations in perfusion samples were determined using high-performance liquid chromatography-ultraviolet method and Peff were calculated. The Peff values obtained by in situ single-pass intestinal perfusion ranged from 0.0146±0.0026×10-4 cm/s of enalaprilat to 1.77±0.34×10-4 cm/s of antipyrine. Among the selected model drugs, the Peff values of high permeability drugs were higher than 0.2×10-4 cm/s, and less than 0.03×10-4 cm/s for low permeability drugs. The experimental rat Peff was highly correlated to the literature human Peff with correlation coefficient (R2) of 0.99. The observed experimental rat Peff values were highly correlated to the literature human Fabs (R2=0.93). All investigated model drugs have similar permeability classification compare with literature permeability classification. The predicted human Fabs were linearly correlated with literature human Fabs (R2=0.90). This method could be used for investigation of the intestinal absorption of new compounds, and for prediction the absorption fraction in human. Besides, investigation of the permeability classification of generic drug by in situ single-pass intestinal perfusion can be used for application of biowaiver for industry. [ABSTRACT FROM AUTHOR]

The workshop "Drug Permeability - Best Practices for Biopharmaceutics Classification System (BCS) Based Biowaivers" was held virtually on December 6, 2021, organized by the University of Maryland Center of Excellence in Regulatory Science and Innovation (M-CERSI), and the Food and Drug Administration (FDA). The workshop focused on the industrial, academic, and regulatory experiences in generating and evaluating permeability data, with the aim to further facilitate implementation of the BCS and efficient development of high-quality drug products globally. As the first international permeability workshop since the BCS based biowaivers was finalized as the ICH M9 guideline, the workshop included lectures, panel discussions, and breakout sessions. Lecture and panel discussion topics covered case studies at IND, NDA, and ANDA stages, typical deficiencies relating to permeability assessment supporting BCS biowaiver, types of evidence that are available to demonstrate high permeability, method suitability of a permeability assay, impact of excipients, importance of global acceptance of permeability methods, opportunities to expand the use of biowaivers (e.g. non-Caco-2 cell lines, totality-of-evidence approach to demonstrate high permeability) and future of permeability testing. Breakout sessions focused on 1) in vitro and in silico intestinal permeability methods; 2) potential excipient effects on permeability and; 3) use of label and literature data to designate permeability class. [ABSTRACT FROM AUTHOR]

[Display omitted] For solid oral dosage forms drug solubility in intestinal fluid is an important parameter influencing product performance and bioavailability. Solubility along with permeability are the two parameters applied in the Biopharmaceutics and Developability Classification Systems (DCS) to assess a drug's potential for oral administration. Intestinal solubility varies with the intestinal contents and the differences between the fasted and fed states are recognised to influence solubility and bioavailability. In this study a novel fed state simulated media system comprising of nine media has been utilised to measure the solubility of seven drugs (ibuprofen, mefenamic acid, furosemide, dipyridamole, griseofulvin, paracetamol and acyclovir) previously studied in the fasted state DCS. The results demonstrate that the fed nine media system provides a range of solubility values for each drug and solubility behaviour is consistent with published design of experiment studies conducted in either the fed or fasted state. Three drugs (griseofulvin, paracetamol and acyclovir) exhibit very narrow solubility distributions, a result that matches published behaviour in the fasted state, indicating that this property is not influenced by the concentration of simulated media components. The nine solubility values for each drug can be utilised to calculate a dose/solubility volume ratio to visualise the drug's position on the DCS grid. Due to the derivation of the nine media compositions the range and catergorisation could be considered as bioequivalent and can be combined with the data from the original fed intestinal fluid analysis to provide a population based solubility distribution. This provides further information on the drugs solubility behaviour and could be applied to quality by design formulation approaches. Comparison of the fed results in this study with similar published fasted results highlight that some differences detected match in vivo behaviour in food effect studies. This indicates that a combination of the fed and fasted systems may be a useful in vitro biopharmaceutical performance tool. However, it should be noted that the fed media recipes in this study are based on a liquid meal (Ensure Plus) and this may not be representative of alternative fed states achieved through ingestion of a solid meal. Nevertheless, this novel approach provides greater in vitro detail with respect to possible in vivo biopharmaceutical performance, an improved ability to apply risk-based approaches and the potential to investigate solubility based food effects. The system is therefore worthy of further investigation but studies will be required to expand the number of drugs measured and link the in vitro measurements to in vivo results. [ABSTRACT FROM AUTHOR]

Levocetirizine, a histamine H1-receptor antagonist, is prescribed to treat uncomplicated skin rashes associated with chronic idiopathic urticaria as well as the symptoms of both seasonal and continual allergic rhinitis. In this monograph, the practicality of using Biopharmaceutics Classification System (BCS) based methodologies as a substitute for pharmacokinetic studies in human volunteers to appraise the bioequivalence of immediate-release (IR) oral, solid dosage forms containing levocetirizine dihydrochloride was investigated, using data from the literature and in-house testing. Levocetirizine's solubility and permeability properties, as well as its dissolution from commercial products, its therapeutic uses, therapeutic index, pharmacokinetics and pharmacodynamic traits, were reviewed in accordance with the BCS, along with any reports in the literature about failure to meet bioequivalence (BE) requirements, bioavailability issues, drug-excipient interactions as well as other relevant information. The data presented in this monograph unequivocally point to classification of levocetirizine in BCS Class 1. For products that are somewhat supra-equivalent or somewhat sub-equivalent, clinical risks are expected to be insignificant in light of levocetirizine's wide therapeutic index and unlikelihood of severe adverse effects. After careful consideration of all the information available, it was concluded that the BCS-based biowaiver can be implemented for products which contain levocetirizine dihydrochloride, provided (a) the test product comprises excipients that are typically found in IR oral, solid drug products that have been approved by a country belonging to or associated with ICH and are used in quantities that are typical for such products, (b) data supporting the BCS-based biowaiver are gathered using ICH-recommended methods, and (c) all in vitro dissolution requirements specified in the ICH guidance are met by both the test and comparator products (in this case, the comparator is the innovator product). [ABSTRACT FROM AUTHOR]

A dissolution-permeation system has potential to provide insight into the kinetic contributions of dissolution and permeation to overall drug absorption. The goals of the study were to characterize a dissolution-hollow fiber membrane (D-HFM) system and compare its resulting in vitro drug permeation constants (K p ′) to in vivo clinical permeation constants (k p), for four drugs in various Biopharmaceutics Classification System (BCS) classes. Model predictions for D-HFM were made based on derived mixing tank (MT) and complete radial (CRM) flow models and independent measurement of membrane permeability. Experimental D-HFM studies included donor flow rate and donor volume sensitivity studies, and drug permeation profile studies. Additionally, for the four drugs, K p ′ from D-HFM system was compared to (k p) from literature, as well as K p ′ values from side-by-side diffusion cell and dissolution/Caco-2 system. Results show progressive D-HFM system development as a dissolution-permeation tool. Results indicated that D-HFM models using MT or CRM provided close agreement between predicted and observed drug permeation profiles. Drug permeation in D-HFM system was volume dependent, as predicted. Favorably, more drug permeated through the D-HFM system (10–20% in 60 min) compared to side-by-side diffusion cell (1%) and dissolution/Caco-2 system (0.1%). K p ′ from D-HFM system was also closer to in vivo k p ; the two other in vitro models showed lower K p ′. Overall, studies reflect that HFM module has potential to incorporate drug permeation into the in vitro assessment of in vivo tablet and capsule performance. [ABSTRACT FROM AUTHOR]

Donepezil hydrochloride (DH) is the most used anti-Alzheimer's disease drug, however, its classification according to the Biopharmaceutics Classification System (BCS) is not clear in the literature. BCS is one of the accepted criteria used to grant biowaiver (waiver of in vivo bioequivalence studies) of new drug products. So, the purpose of this work was to elucidate the BCS classification of DH and to raise the discussion about the possibility of biowaiver for new medicines containing it. The polymorphic form was previously identified as form III of DH. The drug showed high solubility in the entire pH range evaluated (1.2 to 6.8, at 37 °C) with a pH-dependent solubility profile. The effective permeability (P eff) values obtained with different DH concentrations, using in situ closed-loop perfusion model were statistically similar (p > 0.05), even when compared to high permeability control used (ketoprofen), demonstrating that DH has high permeability which, associated with its high solubility, allows to classify DH as BCS class 1. Relevant data to evaluate for granting a biowaiver for new medicines were also reviewed from the literature. Based on information reunited new immediate-release drug products containing DH should be eligible for BCS-based biowaiver. [Display omitted] [ABSTRACT FROM AUTHOR]

Objectives To predict the substance's behaviour in vivo and determine the viability of the bioactive substance to become a drug, this work aimed to evaluate the biopharmaceutics characteristics of goyazensolide. Methods Differential scanning calorimetry (DSC) and thermogravimetry (TG) were applied for the characterization of goyazensolide. The biopharmaceutics characteristics were evaluated using in-silico and in-vitro (shake-flask and Parallel Artificial Membrane Permeability Assay) methods. Key findings DSC curve showed a single endothermic peak. According to the TG curve, goyazensolide has thermal stability close to 221.0°C and 210.0°C, under a nitrogen and oxygen atmosphere, respectively. In-silico data indicated that goyazensolide has high solubility and low permeability. The high solubility was confirmed by equilibrium solubility studies determined by the shake-flask method. The dose/solubility ratio values were 175.16 ml (pH 1.2), 194.99 ml (pH 4.5) and 222.07 ml (pH 6.8). The effective permeability of 0.03 × 10−6 cm/s was obtained for goyazensolide. This value is lower than furosemide (1.03 × 10−6 cm/s), confirming the low permeability of goyazensolide. Conclusions Biopharmaceutics characteristics of goyazensolide are similar to drugs available on the market and attest to the feasibility of starting the process of developing a formulation containing this substance. [ABSTRACT FROM AUTHOR]

This study aims to clarify the process of oral drug absorption from jelly formulations. Agar and pectin-based jellies containing drugs with different membrane permeability (high: antipyrine [ANT], medium: metoprolol [MET], low: atenolol [ATE]) were prepared and tested for in vitro drug release and in vivo drug absorption in rats. All drugs showed similar release profiles in vitro from both jelly formulations, except for the faster release from pectin jelly at neutral pH. In contrast, in vivo absorption of ATE but not of ANT from jelly formulations was significantly lower than from solution. Absorption of ATE and MET was low from agar jelly after oral administration, whereas additional water intake significantly increased the absorption. The process of drug absorption was described by the compartmental model consisting of jelly, intestinal fluid, and blood compartments. Drugs in the jelly diffuse into the intestinal fluid and then permeate the intestinal membrane. By considering the rate-limiting process, membrane permeability-dependent drug absorption from agar jelly and the effects of water intake were identified. In conclusion, jelly formulations may potentially decrease and delay drug oral absorption, especially of poorly permeable drugs. Intestinal fluid volume is one of the important factors to control the drug absorption., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Junko Nakamura reports financial support, administrative support, equipment, drugs, or supplies, and travel were provided by Ohkura Pharmaceutical Co., Ltd. Yukari Kakino reports financial support, administrative support, equipment, drugs, or supplies, and travel were provided by Ohkura Pharmaceutical Co., Ltd. Yoshihiro Hishikawa reports financial support, administrative support, equipment, drugs, or supplies, and travel were provided by Ohkura Pharmaceutical Co., Ltd. Junko Nakamura reports a relationship with Ohkura Pharmaceutical Co., Ltd. that includes: employment, non-financial support, and travel reimbursement. Yukari Kakino reports a relationship with Ohkura Pharmaceutical Co., Ltd. that includes: employment, non-financial support, and travel reimbursement. Yoshihiro Hishikawa reports a relationship with Ohkura Pharmaceutical Co., Ltd. that includes: employment, non-financial support, and travel reimbursement. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

Abstract The aim of this work was to assess if the commercially available Fluconazole drug products (Reference, Generic and Similar) would meet the biowaiver criteria from Food and Drug Administration (FDA) and Brazilian Agency for Health Surveillance (ANVISA) agencies. All formulations were evaluated considering the dissolution profile carried out in Simulated Gastric Fluid (SGF) pH 1.2, Acetate Buffer (AB) pH 4.5 and Simulated Intestinal Fluid (SIF) pH 6.8. The results demonstrated that all formulations fulfilled the 85% of drug dissolved at 30 min criterion in SGF pH 1.2. However, in AB pH 4.5 and SIF pH 6.8, some formulations, including the comparator, did not achieve this dissolution percentage. The discrepant dissolution profiles also failed the ƒ2 similarity factor analysis, since none of the formulations showed values between 50 and 100 in the three dissolution media. Comparative dissolution profiles were not similar, considering that the main issues concerning the dissolution were evidenced for the comparator product. Hence, a revision in the regulatory norms in order to establish criteria to switch the comparator could result in an increased application of drugs based on biowaiver criteria.

Tazeen Husain, Muhammad Harris Shoaib, Farrukh Rafiq Ahmed, Rabia Ismail Yousuf, Sadaf Farooqi, Fahad Siddiqui, Muhammad Suleman Imtiaz, Madiha Maboos, Sabahat Jabeen Department of Pharmaceutics, Faculty of Pharmacy and Pharmaceutical Sciences, University of Karachi, Karachi, 75270, PakistanCorrespondence: Muhammad Harris Shoaib; Farrukh Rafiq AhmedDepartment of Pharmaceutics, Faculty of Pharmacy and Pharmaceutical Sciences, University of Karachi, Karachi, 75270, PakistanEmail harrisshoaib2000@yahoo.com; farrukh.ahmed@uok.edu.pkPurpose: This study systematically investigated the potential of four model drugs (verapamil HCl, flurbiprofen, atenolol, and furosemide), each belonging to a different class of Biopharmaceutics Classification Systems (BCS) to be developed into oral modified release dosage forms after loading with halloysite nanotubes (HNTs).Methods: The drugs were studied for their loading (mass gain %) by varying solvent system, method, pH, and ratios of loading into the nanotubes using D-optimal split-plot design with the help of Design Expert software. Drug-loaded halloysites were characterized by XRD, DTA, FTIR, SEM, and HPLC-UV-based assay procedures. Dissolution studies were also performed in dissolution media with pH 1.2, 4.5, and 6.8. Moreover, the optimized samples were evaluated under stress stability conditions for determining prospects for the development of oral dosage forms.Results: As confirmed with the results of XRD and DTA, the drugs were found to be converted into amorphous form after loading with halloysite (HNTs). The drugs were loaded in the range of ∼ 7– 9% for the four drugs, with agitation providing satisfactory and equivalent loading as compared to vacuum plus agitation based reported methods. FTIR results revealed either only weak electrostatic (verapamil HCl and flurbiprofen) or no interaction with the surface structure of the HNTs. The dissolution profiling depicted significantly retarded release of drugs with Fickian diffusion from a polydisperse system as a model that suits well for the development of oral dosage forms. HPLC-UV-based assay indicated that except furosemide (BCS class IV), the other three drugs are quite suitable for development for oral dosage forms.Conclusion: The four drugs investigated undergo phase transformation with HNTs. While agitation is an optimum method for loading drugs with various physicochemical attributes into HNTs; solvent system, loading ratios and pH play an important role in the loading efficiency respective to the drug properties. The study supports the capability of developing HNT-based modified release oral dosage forms for drugs with high solubility.Keywords: halloysite nanotubes, HNT, biopharmaceutics classification system, drug release kinetics, verapamil HCl, flurbiprofen, atenolol, furosemide, XRD, DTA, FTIR, SEM

In this study, observed food effects of 473 drugs were categorized into positive, negative, or no effects and compared with the predictions made by machine learning (ML), the Biopharmaceutics Classification System (BCS) and refined Developability Classification System (rDCS). All methods used primarily in silico estimates for prediction, and for ML, four algorithms were evaluated using nested cross-validation to select important information from 371 features calculated based on the chemical structure. Approximately 18 features, including estimated solubility in biorelevant media, were selected as important, and the random forest classifier was the best among four algorithms with 36.6% error rate (ER) and 10.8% opposite prediction rate (OPR). The prediction by rDCS utilizing solubility in a biorelevant medium was somewhat inferior, but not by much; 41.0% ER and 11.4% OPR. Compared with these two methods, the prediction by BCS was inferior; 54.5% ER and 21.4% OPR. ER was improved modestly by using measured features instead of in silico estimates when BCS was applied to a subset of 151 drugs (46.4% from 55.0%). ML and rDCS predicted the food effects of the same subset using in silico estimates with ERs of 37.7% and 42.4%, respectively, suggesting that the predictions by ML and rDCS using in silico features are similar or more accurate than those by BCS using measured features. These results suggest that ML was useful in revealing essential features from complex information and, together with rDCS, is effective in predicting food effects during drug development, including early drug discovery. [ABSTRACT FROM AUTHOR]

Sitagliptin is an antihyperglycemic drug used in adults for the treatment of diabetes Type 2. Literature data and in-house experiments were applied in this monograph to assess whether methods based on the Biopharmaceutics Classification System (BCS) could be used to assess the bioequivalence of solid immediate-release (IR) oral dosage forms containing sitagliptin phosphate monohydrate, as an alternative to a pharmacokinetic study in human volunteers. The solubility and permeability characteristics of sitagliptin were reviewed according to the BCS, along with dissolution, therapeutic index, therapeutic applications, pharmacokinetics, pharmacodynamic characteristics, reports of bioequivalence (BE) / bioavailability problems, data on interactions between the drug and excipients and other data germane to the subject. All data reviewed in this monograph unambiguously support classification of sitagliptin as a BCS Class 1 drug. In light of its broad therapeutic index and lack of severe adverse effects, the clinical risks associated with moderately supraoptimal doses were deemed inconsequential, as were the risks associated with moderately suboptimal doses. Taking all evidence into consideration, it was concluded that the BCS-based biowaiver can be implemented for solid IR oral drug products containing sitagliptin phosphate monohydrate, provided (a) the test product is formulated solely with excipients commonly present in solid IR oral drug products approved in ICH or associated countries and used in amounts commonly applied in this type of product, (b) data in support of the BCS-based biowaiver are obtained using the methods recommended by the WHO, FDA, EMA or ICH and (c) the test product and the comparator product (which is the innovator product in this case) meet all in vitro dissolution specifications provided in the WHO, FDA, EMA or ICH guidance. [ABSTRACT FROM AUTHOR]

[Display omitted] After oral administration, a drug's solubility in intestinal fluid is an important parameter influencing bioavailability and if the value is known it can be applied to estimate multiple biopharmaceutical parameters including the solubility limited absorbable dose. Current in vitro measurements may utilise fasted human intestinal fluid (HIF) or simulated intestinal fluid (SIF) to provide an intestinal solubility value. This single point value is limited since its position in relation to the fasted intestinal solubility envelope is unknown. In this study we have applied a nine point fasted equilibrium solubility determination in SIF, based on a multi-dimensional analysis of fasted human intestinal fluid composition, to seven drugs that were previously utilised to investigate the developability classification system (ibuprofen, mefenamic acid, furosemide, dipyridamole, griseofulvin, paracetamol and acyclovir). The resulting fasted equilibrium solubility envelope encompasses literature solubility values in both HIF and SIF indicating that it measures the same solubility space as current approaches with solubility behaviour consistent with previous SIF design of experiment studies. In addition, it identifies that three drugs (griseofulvin, paracetamol and acyclovir) have a very narrow solubility range, a feature that single point solubility approaches would miss. The measured mid-point solubility value is statistically equivalent to the value determined with the original fasted simulated intestinal fluid recipe, further indicating similarity and that existing literature results could be utilised as a direct comparison. Since the multi-dimensional approach covered greater than ninety percent of the variability in fasted intestinal fluid composition, the measured maximum and minimum equilibrium solubility values should represent the extremes of fasted intestinal solubility and provide a range. The seven drugs all display different solubility ranges and behaviours, a result also consistent with previous studies. The dose/solubility ratio for each measurement point can be plotted using the developability classification system to highlight individual drug behaviours. The lowest solubility represents a worst-case scenario which may be useful in risk-based quality by design biopharmaceutical calculations than the mid-point value. The method also permits a dose/solubility ratio frequency distribution determination for the solubility envelope which permits further risk-based refinement, especially where the drug crosses a classification boundary. This novel approach therefore provides greater in vitro detail with respect to possible biopharmaceutical performance in vivo and an improved ability to apply risk-based analysis to biopharmaceutical performance. Further studies will be required to expand the number of drugs measured and link the in vitro measurements to in vivo results. [ABSTRACT FROM AUTHOR]

Vitamin K antagonists (VKA) and direct oral anticoagulants (DOACs) have been clinically used in the treatment of coagulation disorders. There are four DOACs approved since 2010 (dabigatran etexilate, rivaroxaban, apixaban, and edoxaban), and they were designed to overcome the practical limitations of VKA. This review summarized biopharmaceutics considerations about DOACs, which are critically discussed, applying risk analyses to subside the further classification of these drugs according to the Biopharmaceutics Classification System (BCS). These discussions included data compiled about physicochemical properties, equilibrium solubility, permeability, and drug dissolution of DOACs. From the biopharmaceutics characteristics is possible to identify critical variables related to the absorption process, which can help in the design of new formulations. The data were compared with the criteria recommended by regulatory agencies for the biopharmaceutics classification according to the BCS. From that, these data may be used to discuss the approval of generic medicines by the BCS-based biowaiver, and the clinical risks arising from novel formulations with DOACs. However, although there are indications of biopharmaceutics classifications for DOACs, conclusive information to classify these compounds according to the BCS is lacking, requiring more experimental studies to achieve this aim. Conclusive information is essential for a safe decision about the biowaiver, as well as to guide the development of new formulations containing the DOACs. [ABSTRACT FROM AUTHOR]

Aims of this study were to compare the bioequivalence of two formulations of amoxicillin 500 mg capsules under fasted and fed conditions in the same set of healthy volunteers, compare pharmacokinetics of amoxicillin under the two conditions and to assess the possibility of predicting in vivo bioequivalence of the two formulations using in vitro dissolution data. The innovator product of amoxicillin was used as the reference formulation and a test product, which showed in vitro equivalence after a biowaiver study with the same reference product was used in the bioequivalence study. Altogether 16 subjects were randomized to the reference and test products in the fasted study and 12 of them participated in the fed study. Plasma concentration of amoxicillin was analyzed by a validated Liquid chromatography coupled with two mass spectrometry (LC-MS/MS) method. Noncompartmental analysis was used to determine the pharmacokinetic parameters. Average bioequivalence method was used to evaluate the bioequivalence of the two formulations and statistical significance of the pharmacokinetic parameters were tested to study the effect of food on amoxicillin absorption. The Geometric Mean Ratio (GMR) for the test/reference product for the maximum drug concentrations (C max) was 102.77% and 97.38% in fasted and fed conditions respectively which was within 80.00–125.00% range required to demonstrate bioequivalence. The GMR for test/reference products for the area under the curve (AUC 0-8 ,) was 100.05% and 96.91% in fasted and fed conditions respectively meeting the bioequivalence criteria. For the reference product, the C max was 9.38 and 7.61 µg x mL−1(p =0.0224), time to reach maximum concentration (T max) was 1.73 and 3.02 h (p =0.0005) and AUC 0-8 was 26.02 and 25.54 µg/h−1 mL−1 p = 0.672) under fasted and fed conditions respectively. The test and the reference formulations were bioequivalent under both fasted and fed conditions. Although the C max was significantly lower and T max was significantly delayed under fed conditions, it did not affect the AUC. Therefore, being a time dependent antibiotic, clinically significant effect of food on efficacy of amoxicillin is unlikely. As the selected products were equivalent in vitro, these findings support scientific justification for conducting in vitro dissolution studies for solid oral amoxicillin products as a surrogate for in vivo bioequivalence studies. [ABSTRACT FROM AUTHOR]

Demonstration of bioequivalence (BE) is mandatory while developing generic drugs. The scientific concept of BE applies equally to different regulatory agencies. However, the application of the concept may differ for each agency, which can affect the design of BE studies. To evaluate the study practices in terms of the BE concept in South Korea, we retrospectively analyzed BE study reports available from Ministry of Food and Drug Safety between 2013 and 2019. Statistical estimation of the pharmacokinetic parameters, including peak concentration and area under the concentration–time curve to the last measurable concentration, as well as study design, number of subjects in a study, study duration, fasting status, and formulation of specific drugs were obtained. The drugs were classified per World Health Organization Anatomical Therapeutic Chemical Classification and Biopharmaceutics Classification System. Post-hoc intrasubject coefficient of variation and corresponding sample sizes were calculated from the 90% confidence intervals of pharmacokinetic parameters. A total of 143 generic drugs in 588 BE studies were analyzed. The largest number of studies were performed in the area of Cardiovascular system (172 studies), followed by Nervous system (143 studies) and Alimentary tract and metabolism (92 studies). Overall, BE studies in South Korea were conducted in accordance with the global guideline despite the differences in details. BE studies were focused on the several therapeutic areas and conducted in a similar manner. The number of subjects was generally larger than that estimated with 90% power.

Instead of tremendous advancements in drug delivery, the oral route remains the most preferred route for the administration of therapeutic agents because of the low cost of therapy and ease of administration that leads to high levels of patient concordance. Incorporating an existing medicine into Newer Drug Delivery System (NDDS) are gaining popularities. One such approach is to formulate Immediate Release Tablet, which dissolve or disintegrate rapidly in saliva without the need of water within few seconds due to action of superdisintegrant in the formulation or other novel manufacturing technique. The demand for orally disintegrating tablets has enormously increased during the last decade over the other oral dosage forms (such as tablets, capsules, dry syrups, chewing gums, chewable tablets etc.) particularly for geriatrics and pediatrics, travelers, dysphasics, psychotics and non-cooperative patients. Considering the advantages of Immediate Release Tablet and its growing demand, an attempt has been made through this article to give an overview of preparation and new methodologies for the Immediate Release Tablet followed currently and in past including some patient information.

Background: Lychnophora trichocarpha (Spreng.) Spreng. ex Sch.Bip has been used in folk medicine to treat pain, inflammation, rheumatism and bruises. Eremantholide C, a sesquiterpene lactone, is one of the substances responsible for the anti-inflammatory and anti-hyperuricemic effects of L. trichocarpha. Objectives: Considering the potential to become a drug for the treatment of inflammation and gouty arthritis, this study evaluated the permeability of eremantholide C using in situ intestinal perfusion in rats. From the permeability data, it was possible to predict the fraction absorbed of eremantholide C in humans and elucidate its oral absorption process. Methods: In situ intestinal perfusion studies were performed in the complete small intestine of rats using different concentrations of eremantholide C: 960 μg/ml, 96 μg/ml and 9.6 μg/ml (with and without sodium azide), in order to verify the lack of dependence on the measured permeability as a function of the substance concentration in the perfusion solutions. Results: Eremantholide C showed Peff values, in rats, greater than 5 × 10−5 cm/s and fraction absorbed predicted for humans greater than 85%. These results indicated the high permeability for eremantholide C. Moreover, its permeation process occurs only by passive route, because there were no statistically significant differences between the Peff values for eremantholide C. Conclusion: The high permeability, in addition to the low solubility, indicated that eremantholide C is a biologically active substance BCS class II. The pharmacological activities, low toxicity and biopharmaceutics parameters demonstrate that eremantholide C has the necessary requirements for the development of a drug product, to be administered orally, with action on inflammation, hyperuricemia and gout. [ABSTRACT FROM AUTHOR]

There is a growing need for highly accurate in silico and in vitro predictive models to facilitate drug discovery and development. Results from in vitro permeation studies across the Caco-2 cell monolayer are commonly used for drug permeability screening in industry and are also accepted as a surrogate for human intestinal permeability measurements by the US FDA to support new drug applications. Countless studies carried out in this cell line with published permeability measurements have enabled the development of many in silico prediction models. We identify several common cases that illustrate how using Caco-2 permeability measurements in these in silico and in vitro predictive models will not correlate with human intestinal permeability and will further lead to inaccuracies in these models. We provide guidelines and recommendations for improving these models to more accurately predict clinically relevant information, thereby enhancing the drug discovery, development, and regulatory approval processes.

In this monograph, literature data is reviewed to evaluate the feasibility of waiving in vivo bioequivalence testing and instead applying the Biopharmaceutics Classification System (BCS) based methods to the approval of immediate-release solid oral dosage forms containing moxifloxacin hydrochloride as the sole active pharmaceutical ingredient. To facilitate the feasibility decision, solubility and permeability and dissolution characteristics in the context of the BCS, therapeutic index, therapeutic use, pharmacokinetic parameters, bioequivalence/bioavailability issues, drug-excipient interactions and other relevant data were taken into consideration. Moxifloxacin is a BCS class I drug with a wide therapeutic index. Bioequivalence risks arising from the presence of different excipients in the formulation and due to manufacturing variables were deemed to be low. The risks can be further reduced if the choice of excipients is limited to those present in products already approved in International Conference on Harmonisation or associated countries and if the results of in vitro dissolution studies comply with the specifications stipulated in the appropriate biowaiver guidelines. Under these conditions, we conclude that a BCS-based biowaiver can be recommended for moxifloxacin immediate-release solid oral dosage forms. [ABSTRACT FROM AUTHOR]

Objectives: The Biopharmaceutics Classification System (BCS) categorizes active pharmaceutical ingredients according to their solubility and permeability properties, which are susceptible to matrix or formulation effects. The aim of this research was to evaluate the matrix effects of a hydroethanolic extract of calyces from Physalis peruviana L. (HEE) and its butanol fraction (BF), on the biopharmaceutics classification of their major compound, quercetin‐3‐O‐rutinoside (rutin, RU). Methods: Rutin was quantified by HPLC‐UV, and Caco‐2 cell monolayer transport studies were performed to obtain the apparent permeability values (Papp). Aqueous solubility was determined at pH 6.8 and 7.4. Key findings: The Papp values followed this order: BF > HEE > RU (1.77 ± 0.02 > 1.53 ± 0.07 > 0.90 ± 0.03 × 10−5 cm/s). The lowest solubility values followed this order: HEE > RU > BF (2.988 ± 0.07 > 0.205 ± 0.002 > 0.189 ± 0.005 mg/ml). Conclusions: According to these results, rutin could be classified as BCS classes III (high solubility/low permeability) and IV (low solubility/low permeability), depending on the plant matrix. Further work needs to be done in order to establish how apply the BCS for research and development of new botanical drugs or for bioequivalence purposes. [ABSTRACT FROM AUTHOR]

Biopharmaceutics Classification System (BCS) provides a basis on which regulatory authorities can give wavier to unnecessary human trials by considering the fundamental properties of drug molecule viz. solubility and permeability. Present research aims to classify magnesium orotate (MOD) into its appropriate BCS class so as to guide pharmaceutical scientists to develop better formulations to ensure its good bioavailability. Equilibrium solubility and dynamic dissolution studies of MOD were conducted in different physiological media and dose solubility ratio was calculated with respect to both therapeutic dose (1000 mg equivalent to 65.6 mg elemental magnesium) as well as the highest available strength (500 mg equivalent to 32.8 mg elemental magnesium). Permeability of MOD was assessed using the noneverted rat intestinal sac model to find out the percent absorption of MOD when taken orally as a single dose. These results were further verified by conducting a single-dose pharmacokinetic study in Wistar rats. Based on equilibrium solubility and dynamic dissolution studies, at a dose of 500 mg, magnesium orotate was found to comply with the high solubility criterion of BCS, but it was not the case with 1000 mg dose. MOD had good permeability and absorption as more than 90% of tested dose permeated the intestinal mucosa and recovered in urine. Hence, quantitatively at a dose of 500 mg MOD belongs to class I and at a dose of 1000 mg it belongs to class II of BCS. [ABSTRACT FROM AUTHOR]

Determining burn bed availability from the start of a disaster is critical to emergency response efforts, yet continues to be one of the most elusive aspects for planners to anticipate. Healthcare providers agree that, over time, burn centers (BCs) can and will move patients, activate staff, and bring in supplies to meet surge needs. The real challenge lies in identifying how many beds will be immediately available to handle any initial surge of patients. A consortium of 27 BCs in the northeast participates in a telephone bed census program. Although only accurate at the time of each call, clinical staff is asked to report the number of open ICU and/or step-down beds. Retrospective review of 86 Burn Bed Census (BBC) reports was conducted over an 8-year period. Data were statistically analyzed for total, absolute minimum, mean, SD and linear trend analysis. The mean for immediately available beds from January 2009 through December 2016 is 72; with monthly averages ranging from 62 (7%) average available beds in January to 78 (9%) average available beds in November. Monthly SDs range from 6 in July to 17 in November. One goal for disaster planners is to approximate a number of immediately available beds without overwhelming any one BC with too many patients. Utilizing this model enables planners and clinicians throughout the northeast to predict potential burn bed availability and make more reliable decisions about when and where to initially send patients. [ABSTRACT FROM AUTHOR]

Objective: According to the regulatory guidelines, one of the critical steps in using in‐vitro permeability methods for permeability classification is to demonstrate the suitability of the method. Here, suitability of the permeability method by using a monolayer of cultured epithelial cells was verified with different criteria. Methods: Imaging with a transmission electron microscope was used for characterisation of the cells. Monolayer integrity was confirmed by transepithelial electrical resistance measurements and permeability of zero permeability marker compounds. Real‐time polymerase chain reaction was employed to evaluate expression levels of 84 known transporters. Samples for bidirectional permeability determination were quantified by ultra‐performance liquid chromatography. Key findings: The Caco‐2 cells grow in an intact monolayer and morphologically resemble enterocytes. Genes of 84 known transporters were expressed at different levels; furthermore, expression was time depended. Functional expression of efflux transporter P‐glycoprotein was confirmed. We established a correlation between permeability coefficients of 21 tested drug substances ranging from low, moderate and high absorption with human fraction absorbed literature data (R2 = 0.84). Conclusions: Assay standardisation assures the consistency of experimental data. Only such fully characterised model has the ability to accurately predict drug's intestinal permeability at the early stage of research or for the BCS‐based biowaiver application. [ABSTRACT FROM AUTHOR]

Abstract Overencapsulation is a technique used to conceal tablet products for blinding in randomized controlled trials. A tablet is inserted in an opaque capsule shell with backfill excipient to prevent rattling. Regulatory authorities require evidence that such modification does not materially alter drug release to approve their use in trials. The objective of this study was to assess impact of overencapsulation on disintegration and dissolution of 4 immediate-release drug products (penicillin V, gemfibrozil, ciprofloxacin, and furosemide). Each unmodified tablet was compared to 3 overencapsulated tablets with differing backfill excipient (colloidal silica, lactose monohydrate, or microcrystalline cellulose). All 12 overencapsulated tablets met disintegration and dissolution acceptance criteria. Dissolution acceptance was dependent on apparatus as only 4/12 formulations met specifications using the rotating basket compared to 12/12 using the rotating paddle. Significant differences in release were observed at early time points (T 5 -T 15). No correlation was observed between aqueous solubility and release, although dissolution of the lipophilic drug gemfibrozil was least impacted by overencapsulation. There was evidence that type/quantity of backfill delays release at early time points. These findings indicate that under the specified conditions, overencapsulated formulations of 4 drugs, 1 from each class of the Biopharmaceutics Classification System, met compendial requirements for release testing. [ABSTRACT FROM AUTHOR]

This study aimed at evaluating the shake-flask use as a universal method to evaluate drug solubility in a biowaiver context as proposed by FDA, EMA and ANVISA. The solubility of losartan was determined in three buffers using the shake-flask method, intrinsic dissolution (ID) and Quantum Chemistry. Moreover, the evaluation of a losartan dissolution profile from coated tablets was conducted. The losartan low solubility in pH 1.2 and high solubility in pH 6.8 were observed using the shake-flask method. However, the solubility results using ID demonstrated its high solubility in pH 1.2 and 6.8. It was not possible to find conclusive results regarding the solubility of the drug in pH 4.5. The studies conducted by Quantum Chemistry provide molecular and electronic data that helped understand the losartan solvation in different pH values. Our experimental results defined that losartan can be classified as a low-solubility drug. In addition, this work shows that shake-flask cannot be a universal method of solubility studies in biowaiver context. Individual analysis will be necessary. The intrinsic dissolution should be considered as a complementary method. [ABSTRACT FROM AUTHOR]