Search

ABSTRACT Genomic repeat sequences are patterns of nucleic acids that exist in multiple copies throughout the genome. More than 60 Mendelian disorders are caused by the expansion or contraction of these repeats. Various specific methods for determining tandem repeat variations have been developed. However, these methods are highly specific to the genomic region being studied and sometimes require specialized tools. In this study, we have investigated the use of Optical Genome Mapping (OGM) as a diagnostic tool for detecting repeat disorders. We evaluated 19 patients with a prediagnosis of repeat disorders and explained the molecular etiology of 9 of them with OGM (5 patients with Facioscapulohumeral Muscular Dystrophy (FSHD), 2 patients with Friedreich's Ataxia (FA), 1 patient with Fragile X Syndrome (FXS), and 1 patient with Progressive Myoclonic Epilepsy 1A (EPM1A)). We confirmed OGM results with more widely used fragment analysis techniques. This study highlights the utility of OGM as a diagnostic tool for repeat expansion and contraction diseases such as FA, FXS, EPM1A, and FSHD. [ABSTRACT FROM AUTHOR]

Telomeres are protective structures at the end of eukaryotic chromosomes that are strongly implicated in ageing and ill health. They attrition upon every cellular reproductive cycle. Evidence suggests that short telomeres trigger DNA damage responses that lead to cellular senescence. Accurate methods for measuring telomeres are required to fully investigate the roles that shortening telomeres play in the biology of disease and human ageing. The last two decades have brought forth several techniques that are used for measuring telomeres. This editorial highlights strengths and limitations of traditional and emerging techniques, guiding researchers to choose the most appropriate methodology for their research needs. These methods include Quantitative Polymerase Chain Reaction (qPCR), Omega qPCR (Ω-qPCR), Terminal Restriction Fragment analysis (TRF), Single Telomere Absolute-length Rapid (STAR) assays, Single TElomere Length Analysis (STELA), TElomere Shortest Length Assays (TESLA), Telomere Combing Assays (TCA), and Long-Read Telomere Sequencing. Challenges include replicating telomere measurement within and across cohorts, measuring the length of telomeres on individual chromosomes, and standardised reporting for publications. Areas of current and future focus have been highlighted, with recent methodical advancements, such as long-read sequencing, providing significant scope to study telomeres at an individual chromosome level. [ABSTRACT FROM AUTHOR]

Abstract Telomeres are protective structures at the end of eukaryotic chromosomes that are strongly implicated in ageing and ill health. They attrition upon every cellular reproductive cycle. Evidence suggests that short telomeres trigger DNA damage responses that lead to cellular senescence. Accurate methods for measuring telomeres are required to fully investigate the roles that shortening telomeres play in the biology of disease and human ageing. The last two decades have brought forth several techniques that are used for measuring telomeres. This editorial highlights strengths and limitations of traditional and emerging techniques, guiding researchers to choose the most appropriate methodology for their research needs. These methods include Quantitative Polymerase Chain Reaction (qPCR), Omega qPCR (Ω-qPCR), Terminal Restriction Fragment analysis (TRF), Single Telomere Absolute-length Rapid (STAR) assays, Single TElomere Length Analysis (STELA), TElomere Shortest Length Assays (TESLA), Telomere Combing Assays (TCA), and Long-Read Telomere Sequencing. Challenges include replicating telomere measurement within and across cohorts, measuring the length of telomeres on individual chromosomes, and standardised reporting for publications. Areas of current and future focus have been highlighted, with recent methodical advancements, such as long-read sequencing, providing significant scope to study telomeres at an individual chromosome level.

Bio‐enhanced oil recovery (BEOR) is an advanced and innovative approach in the oil industry that could be a potential solution to increase oil production from existing reservoirs using technologies based on biological methods. Nevertheless, there has been a lack of comprehensive reviews that elucidate the various aspects and potential of different BEOR methods and processes. This review summarizes the recent progress of various methods employed in BEOR, exploring their applications and highlighting their distinct advantages. BEOR employs different techniques, including microorganisms and biomicrobes microbial enhanced oil recovery (MEOR), enzymes, biopolymers, bionanomaterials, alkaline, and biosurfactants to increase oil recovery. Microorganisms contribute significantly to BEOR through metabolic processes that result in the production of gases and acids. The role of enzymes is to enhance the fluid flow and thereby facilitate oil production. Biosurfactants reduce the interfacial tension (IFT) between oil and water and mobilize the trapped oil. Biopolymers are obtained from biological sources such as plants, microorganisms, and algae. Biopolymers can interact with oil, which is well‐used in the process of EOR. Bionano processes represent a fusion of biology and nanotechnology, integrate the advantages of both microorganisms and nanoparticles, and provide a synergic effect for EOR. The BEOR revealed an attractive potential to be an effective approach to maximizing the oil recovery considering environmental, economic productivity, and sustainability issues. Also, this review encourages further studies and development in this field for fully exploiting BEOR's capacity and meeting the ever‐increasing needs of energy resources with a sustainable viewpoint. [ABSTRACT FROM AUTHOR]

The versatile potential of bacteriophage MS2-derived virus-like particles (VLPs) in medical biotechnology has been extensively studied during the last 30 years. Since the first reports showing that MS2 VLPs can be produced at high yield and relatively easily engineered, numerous applications have been proposed. Particular effort has been spent in developing MS2 VLPs as protective capsules and delivery platforms for diverse molecules, such as chemical compounds, proteins and nucleic acids. Among these, two are particularly noteworthy: as scaffolds displaying heterologous epitopes for vaccine development and as capsids for encapsulation of foreign RNA. In this review, we summarize the progress in developing MS2 VLPs for these two areas. Plain language summary Hollow, nanosized protein particles have many potential uses. If they can be appropriately engineered, they may for example be able to carry therapeutic cargoes to diseased cells or be used as a vaccine where appropriate antigens are mounted on their external surface. Many viruses offer a ready-made protein particle, the capsid, which can be made hollow by exclusion of the viral genetic material. MS2 is a virus that targets bacteria – a bacteriophage – which is well characterized and has been developed over many years for a number of applications. It has particular promise for development as a vaccine and for RNA delivery, both of which are reviewed here. Graphical abstract Bacteriophage MS2 has features and properties that make it attractive for a range of biotechnological and biomedical applications. Figure created with Biorender.com. Executive summary MS2 virus-like particles as scaffolds displaying antigenic peptides A number of virus-like particles (VLPs) are known to be effective immunogens and in some cases have been developed into clinically approved vaccines. MS2 is an icosahedral ssRNA bacteriophage around 26 nm in diameter. Immunogenic epitopes can be genetically engineered into the externally displayed AB loop of the capsid proteins. MS2 VLPs displaying such epitopes have been shown to be capable of eliciting an immune response in mice. Genetic fusion of identical coat protein monomers to form fused dimers stabilizes the resulting VLP but only one A/B loop of the resulting dimer can tolerate an insertion if stability is to be maintained. Proof-of-principle studies have been carried out for MS2 modified to act as vaccines against HPV, foot-and-mouth virus and Chlamydia trichomatis. The ability of MS2 VLPs to encapsidate their own encoding nucleic acid means that CPs with fused peptide can be used to 'biopan' a peptide library for binding to targets (e.g., antibodies) wherein the sequence encoding binding peptides can be easily recovered. MS2 VLPs as capsids for encapsulation of foreign RNA MS2 encapsidates its own RNA by binding to the 'pac site', a stem-loop structure. MS2 VLPs can encapsidate foreign RNA sequences by fusion to a pac site sequence. Fusion of target RNA to a copy of the pac site sequence with expression from the same transcript as the MS2 CP and the maturase avoids nonspecific RNA packing. The RNA is protected and stabilized and is known as armored RNA. Armored RNA can be used as internal control standards in real-time-PCR. Armored RNAs able to protect longer RNA sequences were developed through modification of expression vector strategy and pac site. Both in vivo and in vitro RNA packaging approaches have been developed. Foreign sRNAs and mRNA can be encapsidated within MS2 VLPs. MS2 VLPs decorated with cell-penetrating peptides can deliver miRNAs to cells. mRNA, being longer, is more challenging to package but this has been demonstrated. [ABSTRACT FROM AUTHOR]

Structural variants drive tumorigenesis by disrupting normal gene function through insertions, inversions, translocations, and copy number changes, including deletions and duplications. Detecting structural variants is crucial for revealing their roles in tumor development, clinical outcomes, and personalized therapy. Presently, most studies rely on short-read data from next-generation sequencing that aligns back to a reference genome to determine if and, if so, where a structural variant occurs. However, structural variant discovery by short-read sequencing is challenging, primarily because of the difficulty in mapping regions of repetitive sequences. Optical genome mapping (OGM) is a recent technology used for imaging and assembling long DNA strands to detect structural variations. To capture the structural variant landscape more thoroughly in the human genome, we developed an integrated pipeline that combines Bionano OGM and Illumina whole-genome sequencing and applied it to samples from 29 pediatric B-ALL patients. The addition of OGM allowed us to identify 511 deletions, 506 insertions, 93 duplications/gains, and 145 translocations that were otherwise missed in the short-read data. Moreover, we identified several novel gene fusions, the expression of which was confirmed by RNA sequencing. Our results highlight the benefit of integrating OGM and short-read detection methods to obtain a comprehensive analysis of genetic variation that can aid in clinical diagnosis, provide new therapeutic targets, and improve personalized medicine in cancers driven by structural variation. [ABSTRACT FROM AUTHOR]

A recessive Short Tandem Repeat expansion in RFC1 has been found to be associated with cerebellar ataxia, neuropathy and vestibular areflexia syndrome (CANVAS), and to be a frequent cause of late onset ataxia and sensory neuropathy. The usual procedure for sizing these expansions is based on Southern Blotting (SB), a time-consuming and a relatively imprecise technique. In this paper, we compare SB with Optical Genome Mapping (OGM), a method for detecting Structural Variants (SVs) based on the measurement of distances between fluorescently labelled probes, for the diagnosis of RFC1 CANVAS and disease spectrum. The two methods are applied to 17 CANVAS patients' blood samples and resulting sizes compared, showing a good agreement. Further, long-read sequencing is used for two patients to investigate the agreement of sizes with either SB or OGM. Our study concludes that OGM represents a viable alternative to SB, allowing for a simpler technique, a more precise sizing of the expansion and ability to expand analysis of SV in the entire genome as opposed to SB which is a locus specific method. [ABSTRACT FROM AUTHOR]

A recessive Short Tandem Repeat expansion in RFC1 has been found to be associated with cerebellar ataxia, neuropathy and vestibular areflexia syndrome (CANVAS), and to be a frequent cause of late onset ataxia and sensory neuropathy. The usual procedure for sizing these expansions is based on Southern Blotting (SB), a time-consuming and a relatively imprecise technique. In this paper, we compare SB with Optical Genome Mapping (OGM), a method for detecting Structural Variants (SVs) based on the measurement of distances between fluorescently labelled probes, for the diagnosis of RFC1 CANVAS and disease spectrum. The two methods are applied to 17 CANVAS patients’ blood samples and resulting sizes compared, showing a good agreement. Further, long-read sequencing is used for two patients to investigate the agreement of sizes with either SB or OGM. Our study concludes that OGM represents a viable alternative to SB, allowing for a simpler technique, a more precise sizing of the expansion and ability to expand analysis of SV in the entire genome as opposed to SB which is a locus specific method.

Polymorphic inversions are ubiquitous in humans and they have been linked to both adaptation and disease. Following their discovery in Drosophila more than a century ago, inversions have proved to be more elusive than other structural variants. A wide variety of methods for the detection and genotyping of inversions have recently been developed: multiple techniques based on selective amplification by PCR, short‐ and long‐read sequencing approaches, principal component analysis of small variant haplotypes, template strand sequencing, optical mapping, and various genome assembly methods. Many methods apply complex wet lab protocols or increasingly refined bioinformatic analyses. This review is an attempt to provide a practical summary and comparison of the methods that are in current use, with a focus on metrics such as the maximum size of segmental duplications at inversion breakpoints that each method can tolerate, the size range of inversions that they recover, their throughput, and whether the locations of putative inversions must be known beforehand. [ABSTRACT FROM AUTHOR]

BackgroundMassively parallel DNA sequencing, such as exome sequencing, has become a routine clinical procedure to identify pathogenic variants responsible for a patient's phenotype. Exome sequencing has the capability of reliably identifying inherited and de novo single-nucleotide variants, small insertions, and deletions. However, due to the use of 100-300-bp fragment reads, this platform is not well powered to sensitively identify moderate to large structural variants (SV), such as insertions, deletions, inversions, and translocations.MethodsTo overcome these limitations, we used next-generation mapping (NGM) to image high molecular weight double-stranded DNA molecules (megabase size) with fluorescent tags in nanochannel arrays for de novo genome assembly. We investigated the capacity of this NGM platform to identify pathogenic SV in a series of patients diagnosed with Duchenne muscular dystrophy (DMD), due to large deletions, insertion, and inversion involving the DMD gene.ResultsWe identified deletion, duplication, and inversion breakpoints within DMD. The sizes of deletions were in the range of 45-250 Kbp, whereas the one identified insertion was approximately 13 Kbp in size. This method refined the location of the break points within introns for cases with deletions compared to current polymerase chain reaction (PCR)-based clinical techniques. Heterozygous SV were detected in the known carrier mothers of the DMD patients, demonstrating the ability of the method to ascertain carrier status for large SV. The method was also able to identify a 5.1-Mbp inversion involving the DMD gene, previously identified by RNA sequencing.ConclusionsWe showed the ability of NGM technology to detect pathogenic structural variants otherwise missed by PCR-based techniques or chromosomal microarrays. NGM is poised to become a new tool in the clinical genetic diagnostic strategy and research due to its ability to sensitively identify large genomic variations.

Optical mapping approaches are widely preferred and applied in different branches of genomic studies because of their accuracy, low cost, and high efficiency. In the current study, a sequence orientation of the Fusarium oxysporum f. sp. melongenae (FOMG) genome that is deposited in GenBank National Center for Biotechnology Information under accession number MPIL00000000 was used as the reference genome, which we checked with Bionano Genomics optical mapping approaches. The optical mapping produced 103 contigs, the longest of which was 3.05 Mb. The N50 value of optical map contigs is 0.85 Mb. The sequences of the FOMG reference genome and optical map mainly match each other. Results obtained in the current study indicate that optical mapping can be used to construct complete and gapless assemblies of the FOMG genome. It also can be applied to validate a previous genome assembly. [ABSTRACT FROM AUTHOR]

Chromosome level assemblies are accumulating in various taxonomic groups including mosquitoes. However, even in the few reference-quality mosquito assemblies, a significant portion of the heterochromatic regions including telomeres remain unresolved. Here we produce a de novo assembly of the New World malaria mosquito, Anopheles albimanus by integrating Oxford Nanopore sequencing, Illumina, Hi-C and optical mapping. This 172.6 Mbps female assembly, which we call AalbS3, is obtained by scaffolding polished large contigs (contig N50 = 13.7 Mbps) into three chromosomes. All chromosome arms end with telomeric repeats, which is the first in mosquito assemblies and represents a significant step toward the completion of a genome assembly. These telomeres consist of tandem repeats of a novel 30-32 bp Telomeric Repeat Unit (TRU) and are confirmed by analyzing the termini of long reads and through both chromosomal in situ hybridization and a Bal31 sensitivity assay. The AalbS3 assembly included previously uncharacterized centromeric and rDNA clusters and more than doubled the content of transposable elements and other repetitive sequences. This telomere-to-telomere assembly, although still containing gaps, represents a significant step toward resolving biologically important but previously hidden genomic components. The comparison of different scaffolding methods will also inform future efforts to obtain reference-quality genomes for other mosquito species.

Pseudomonas aeruginosa biofilms comprise three main polysaccharides: alginate, psl, and pel, which all imbue tolerance against exogenous antimicrobials. Nanoparticles (NPs) are an exciting new strategy to overcome the biofilm matrix for therapeutic delivery applications; however, zero existing FDA approvals for biofilm-specific NP formulations can be attributed to the complex interplay of physiochemical forces at the biofilm-NP interface. Here, we leverage a set of inducible, polysaccharide-specific, expressing isogenic P. aeruginosa mutants coupled with an assembled layer-by-layer NP (LbL NP) panel to characterize biofilm-NP interactions. When investigating these interactions using confocal microscopy, alginate-layered NPs associated more than dextran-sulfate-layered NPs with biofilms that had increased alginate production, including biofilms produced by mucoid P. aeruginosa isolates from people with cystic fibrosis. These differences were further confirmed in LbL NPs layered with polysaccharide- or hydrocarbon-based polymers with pendent carboxylate or sulfate functional groups. These data suggest carboxylated NP surfaces have enhanced interactions specifically with mucoid biofilms as compared to sulfated surfaces and lay the foundation for their inclusion as a design element for increasing biofilm-NP interactions and efficacious drug delivery.

Motivation Long read sequencing and Bionano Genomics optical maps are two techniques that, when used together, make it possible to reconstruct entire chromosome or chromosome arms structure. However, the existing tools are often too conservative and organization of contigs into scaffolds is not always optimal. Results We developed BiSCoT (Bionano SCaffolding COrrection Tool), a tool that post-processes files generated during a Bionano scaffolding in order to produce an assembly of greater contiguity and quality. BiSCoT was tested on a human genome and four publicly available plant genomes sequenced with Nanopore long reads and improved significantly the contiguity and quality of the assemblies. BiSCoT generates a fasta file of the assembly as well as an AGP file which describes the new organization of the input assembly. Availability BiSCoT and improved assemblies are freely available on GitHub at http://www.genoscope.cns.fr/biscot and Pypi at https://pypi.org/project/biscot/.

Chromosome level assemblies are accumulating in various taxonomic groups including mosquitoes. However, even in the few reference-quality mosquito assemblies, a significant portion of the heterochromatic regions including telomeres remain unresolved. Here we produce a de novo assembly of the New World malaria mosquito, Anopheles albimanus by integrating Oxford Nanopore sequencing, Illumina, Hi-C and optical mapping. This 172.6 Mbps female assembly, which we call AalbS3, is obtained by scaffolding polished large contigs (contig N50 = 13.7 Mbps) into three chromosomes. All chromosome arms end with telomeric repeats, which is the first in mosquito assemblies and represents a significant step toward the completion of a genome assembly. These telomeres consist of tandem repeats of a novel 30-32 bp Telomeric Repeat Unit (TRU) and are confirmed by analyzing the termini of long reads and through both chromosomal in situ hybridization and a Bal31 sensitivity assay. The AalbS3 assembly included previously uncharacterized centromeric and rDNA clusters and more than doubled the content of transposable elements and other repetitive sequences. This telomere-to-telomere assembly, although still containing gaps, represents a significant step toward resolving biologically important but previously hidden genomic components. The comparison of different scaffolding methods will also inform future efforts to obtain reference-quality genomes for other mosquito species. [ABSTRACT FROM AUTHOR]

Abstract Background Massively parallel DNA sequencing, such as exome sequencing, has become a routine clinical procedure to identify pathogenic variants responsible for a patient’s phenotype. Exome sequencing has the capability of reliably identifying inherited and de novo single-nucleotide variants, small insertions, and deletions. However, due to the use of 100–300-bp fragment reads, this platform is not well powered to sensitively identify moderate to large structural variants (SV), such as insertions, deletions, inversions, and translocations. Methods To overcome these limitations, we used next-generation mapping (NGM) to image high molecular weight double-stranded DNA molecules (megabase size) with fluorescent tags in nanochannel arrays for de novo genome assembly. We investigated the capacity of this NGM platform to identify pathogenic SV in a series of patients diagnosed with Duchenne muscular dystrophy (DMD), due to large deletions, insertion, and inversion involving the DMD gene. Results We identified deletion, duplication, and inversion breakpoints within DMD. The sizes of deletions were in the range of 45–250 Kbp, whereas the one identified insertion was approximately 13 Kbp in size. This method refined the location of the break points within introns for cases with deletions compared to current polymerase chain reaction (PCR)-based clinical techniques. Heterozygous SV were detected in the known carrier mothers of the DMD patients, demonstrating the ability of the method to ascertain carrier status for large SV. The method was also able to identify a 5.1-Mbp inversion involving the DMD gene, previously identified by RNA sequencing. Conclusions We showed the ability of NGM technology to detect pathogenic structural variants otherwise missed by PCR-based techniques or chromosomal microarrays. NGM is poised to become a new tool in the clinical genetic diagnostic strategy and research due to its ability to sensitively identify large genomic variations.

Abstract Background Third generation sequencing technologies, with sequencing reads in the tens- of kilo-bases, facilitate genome assembly by spanning ambiguous regions and improving continuity. This has been critical for plant genomes, which are difficult to assemble due to high repeat content, gene family expansions, segmental and tandem duplications, and polyploidy. Recently, high-throughput mapping and scaffolding strategies have further improved continuity. Together, these long-range technologies enable quality draft assemblies of complex genomes in a cost-effective and timely manner. Results Here, we present high quality genome assemblies of the model legume plant, Medicago truncatula (R108) using PacBio, Dovetail Chicago (hereafter, Dovetail) and BioNano technologies. To test these technologies for plant genome assembly, we generated five assemblies using all possible combinations and ordering of these three technologies in the R108 assembly. While the BioNano and Dovetail joins overlapped, they also showed complementary gains in continuity and join numbers. Both technologies spanned repetitive regions that PacBio alone was unable to bridge. Combining technologies, particularly Dovetail followed by BioNano, resulted in notable improvements compared to Dovetail or BioNano alone. A combination of PacBio, Dovetail, and BioNano was used to generate a high quality draft assembly of R108, a M. truncatula accession widely used in studies of functional genomics. As a test for the usefulness of the resulting genome sequence, the new R108 assembly was used to pinpoint breakpoints and characterize flanking sequence of a previously identified translocation between chromosomes 4 and 8, identifying more than 22.7 Mb of novel sequence not present in the earlier A17 reference assembly. Conclusions Adding Dovetail followed by BioNano data yielded complementary improvements in continuity over the original PacBio assembly. This strategy proved efficient and cost-effective for developing a quality draft assembly compared to traditional reference assemblies.

Abstract Background Reference genome assemblies are valuable, as they provide insights into gene content, genetic evolution and domestication. The higher the quality of a reference genome assembly the more accurate the downstream analysis will be. During the last few years, major efforts have been made towards improving the quality of genome assemblies. However, erroneous and incomplete assemblies are still common. Complementary to DNA sequencing technologies, optical mapping has advanced genomic studies by facilitating the production of genome scaffolds and assessing structural variation. However, there are few tools available to comprehensively examine misassemblies in reference genome sequences using optical map data. Results We present BioNanoAnalyst, a software package to examine genome assemblies based on restriction endonuclease cut sites and optical map data. A graphical user interface (GUI) allows users to assess reference genome sequences on different computer platforms without the requirement of programming knowledge. The zoom function makes visualisation convenient, while a GFF3 format output file gives an option to directly visualise questionable assembly regions by location and nucleotides following import into a local genome browser. Conclusions BioNanoAnalyst is a tool to identify misassemblies in a reference genome sequence using optical map data. With the reported information, users can rapidly identify assembly errors and correct them using other software tools, which could facilitate an accurate downstream analysis.

We selected two genetically diverse subspecies of the Trifolium model species, subterranean clover cvs. Daliak and Yarloop. The structural variations (SVs) discovered by Bionano optical mapping (BOM) were validated using Illumina short reads. In the analysis, BOM identified 12 large-scale regions containing deletions and 19 regions containing insertions in Yarloop. The 12 large-scale regions contained 71 small deletions when validated by Illumina short reads. The results suggest that BOM could detect the total size of deletions and insertions, but it could not precisely report the location and actual quantity of SVs in the genome. Nucleotide-level validation is crucial to confirm and characterize SVs reported by optical mapping. The accuracy of SV detection by BOM is highly dependent on the quality of reference genomes and the density of selected nickases.

We selected two genetically diverse subspecies of the Trifolium model species, subterranean clover cvs. Daliak and Yarloop. The structural variations (SVs) discovered by Bionano optical mapping (BOM) were validated using Illumina short reads. In the analysis, BOM identified 12 large-scale regions containing deletions and 19 regions containing insertions in Yarloop. The 12 large-scale regions contained 71 small deletions when validated by Illumina short reads. The results suggest that BOM could detect the total size of deletions and insertions, but it could not precisely report the location and actual quantity of SVs in the genome. Nucleotide-level validation is crucial to confirm and characterize SVs reported by optical mapping. The accuracy of SV detection by BOM is highly dependent on the quality of reference genomes and the density of selected nickases. [ABSTRACT FROM AUTHOR]

Background: Third generation sequencing technologies, with sequencing reads in the tens- of kilo-bases, facilitate genome assembly by spanning ambiguous regions and improving continuity. This has been critical for plant genomes, which are difficult to assemble due to high repeat content, gene family expansions, segmental and tandem duplications, and polyploidy. Recently, high-throughput mapping and scaffolding strategies have further improved continuity. Together, these long-range technologies enable quality draft assemblies of complex genomes in a cost-effective and timely manner. Results: Here, we present high quality genome assemblies of the model legume plant, Medicago truncatula (R108) using PacBio, Dovetail Chicago (hereafter, Dovetail) and BioNano technologies. To test these technologies for plant genome assembly, we generated five assemblies using all possible combinations and ordering of these three technologies in the R108 assembly. While the BioNano and Dovetail joins overlapped, they also showed complementary gains in continuity and join numbers. Both technologies spanned repetitive regions that PacBio alone was unable to bridge. Combining technologies, particularly Dovetail followed by BioNano, resulted in notable improvements compared to Dovetail or BioNano alone. A combination of PacBio, Dovetail, and BioNano was used to generate a high quality draft assembly of R108, a M. truncatula accession widely used in studies of functional genomics. As a test for the usefulness of the resulting genome sequence, the new R108 assembly was used to pinpoint breakpoints and characterize flanking sequence of a previously identified translocation between chromosomes 4 and 8, identifying more than 22.7 Mb of novel sequence not present in the earlier A17 reference assembly. Conclusions: Adding Dovetail followed by BioNano data yielded complementary improvements in continuity over the original PacBio assembly. This strategy proved efficient and cost-effective for developing a quality draft assembly compared to traditional reference assemblies. [ABSTRACT FROM AUTHOR]

Subterranean clover is an important annual forage legume, whose diploidy and inbreeding nature make it an ideal model for genomic analysis in Trifolium. We reported a draft genome assembly of the subterranean clover TSUd_r1.1. Here we evaluate genome mapping on nanochannel arrays and generation of a transcriptome atlas across tissues to advance the assembly and gene annotation. Using a BioNano-based assembly spanning 512 Mb (93% genome coverage), we validated the draft assembly, anchored unplaced contigs and resolved misassemblies. Multiple contigs (264) from the draft assembly coalesced into 97 super-scaffolds (43% of genome). Sequences longer than >1 Mb increased from 40 to 189 Mb giving 1.4-fold increase in N50 with total genome in pseudomolecules improved from 73 to 80%. The advanced assembly was re-annotated using transcriptome atlas data to contain 31 272 protein-coding genes capturing >96% of the gene content. Functional characterization and GO enrichment confirmed gene expression for response to water deprivation, flavonoid biosynthesis and embryo development ending in seed dormancy, reflecting adaptation to the harsh Mediterranean environment. Comparative analyses across Papilionoideae identified 24 893 Trifolium-specific and 6325 subterranean-clover-specific genes that could be mined further for traits such as geocarpy and grazing tolerance. Eight key traits, including persistence, improved livestock health by isoflavonoid production in addition to important agro-morphological traits, were fine-mapped on the high-density SNP linkage map anchored to the assembly. This new genomic information is crucial to identify loci governing traits allowing marker-assisted breeding, comparative mapping and identification of tissue-specific gene promoters for biotechnological improvement of forage legumes. [ABSTRACT FROM AUTHOR]

Pleurotus ostreatus is a commercially grown mushroom species in China. However, studies on the mechanisms of the fruiting body development and stress response of P. ostreatus are still at a primary stage. In this study, we report the entire genome sequence of P. ostreatus CCMSSC03989. Then, we performed comprehensive genome-wide characterization and expression analysis of the MYB transcription factor family during a series of developmental stages and under the condition of heat stress. A 34.76 Mb genome was obtained through next-generation sequencing (NGS) and Bionano optical mapping approaches. The genome has a scaffold N50 of 1.1 Mb and contains 10.11% repeats, and 10,936 gene models were predicted. A total of 20 MYB genes (PoMYB) were identified across the genome, and the full-length open reading frames were isolated. The PoMYBs were classified into 1 repeat (1R), 2R, and 3R-MYB groups according to their MYB domain repeat numbers, and 3R-MYBs possessed relatively more introns than 1R and 2R-MYBs. Based on phylogenetic analysis, the PoMYBs were divided into four groups and showed close relationships with the MYB genes of plants and fungi. RNA-sequencing (RNA-Seq) and quantitative PCR (qPCR) analyses revealed that PoMYB expression showed stage-specific patterns in reproductive stages and could be induced by heat stress. The P. ostreatus draft genome will promote genome-wide analysis, and our study of PoMYBs will promote further functional analysis of MYB genes in mushrooms.

Background: Genome assembly remains an unsolved problem. Assembly projects face a range of hurdles that confound assembly. Thus a variety of tools and approaches are needed to improve draft genomes. Results: We used a custom assembly workflow to optimize consensus genome map assembly, resulting in an assembly equal to the estimated length of the Tribolium castaneum genome and with an N50 of more than 1 Mb. We used this map for super scaffolding the T. castaneum sequence assembly, more than tripling its N50 with the program Stitch. Conclusions: In this article we present software that leverages consensus genome maps assembled from extremely long single molecule maps to increase the contiguity of sequence assemblies. We report the results of applying these tools to validate and improve a 7x Sanger draft of the T. castaneum genome. [ABSTRACT FROM AUTHOR]

Self-assembling proteins can form porous compartments that adopt well-defined architectures at the nanoscale. In nature, protein compartments act as semipermeable barriers to enable spatial separation and organization of complex biochemical processes. The compartment pores play a key role in their overall function by selectively controlling the influx and efflux of important biomolecular species. By engineering the pores, the functionality of compartments can be tuned to facilitate non-native applications, such as artificial nanoreactors for catalysis. In this review, we analyze how protein structure determines the porosity and impacts the function of both native and engineered compartments, highlighting the wealth of structural data recently obtained by cryo-EM and X-ray crystallography. Through this analysis, we offer perspectives on how current structural insights can inform future studies into the design of artificial protein compartments as nanoreactors with tunable porosity and function.

Biologically-inspired nanodevices can serve as “natural” alternatives to conventional semiconductor devices in many applications from information storage to mechanical rotors. In this work we consider an ATP-powered transmembrane protein, the Na+,K+-ATPase, which has appealing functionality but still lacks an “atomistic” picture capable of elucidating its operation. The vast collection of experimental literature on the Na+,K+-ATPase gives a unique advantage to this protein in developing and validating computational tools. We have performed extensive molecular dynamic simulations of the Na+,K+-ATPase in an accurate biological environment, followed by time-averaged electrostatic analysis, to investigate the ion-binding loci and access/egress pathways that cations may take through the protein as they are transported across the membrane. [ABSTRACT FROM AUTHOR]

Cenamps' highly talented and commercially experienced team work closely with business leaders to stimulate and manage market-led innovation, enabling businesses to develop new products and services as well as strengthen the regional economic foundation, R&D capabilities and performance. Cenamps achieves this by establishing new state-of-the-art R&D facilities and applied research projects for developing new technologies that will yield significant societal, economic and commercial benefits. [ABSTRACT FROM AUTHOR]

Simple Summary: Reconstructing plant genomes is a difficult task due to their often large sizes, unusual ploidy, and large numbers of repeated elements. However, the field of sequencing is changing very rapidly, with new and improved methods released every year. The ultimate goal of this study is to provide readers with insights into techniques that currently exist for obtaining high-quality and chromosome-scale assemblies of plant genomes. In this work, we presented the advanced techniques already existing in the field and illustrated their application to reconstruct the genome of the yellow sarson, Brassica rapa cv. Z1. With the rise of long-read sequencers and long-range technologies, delivering high-quality plant genome assemblies is no longer reserved to large consortia. Not only sequencing techniques, but also computer algorithms have reached a point where the reconstruction of assemblies at the chromosome scale is now feasible at the laboratory scale. Current technologies, in particular long-range technologies, are numerous, and selecting the most promising one for the genome of interest is crucial to obtain optimal results. In this study, we resequenced the genome of the yellow sarson, Brassica rapa cv. Z1, using the Oxford Nanopore PromethION sequencer and assembled the sequenced data using current assemblers. To reconstruct complete chromosomes, we used and compared three long-range scaffolding techniques, optical mapping, Omni-C, and Pore-C sequencing libraries, commercialized by Bionano Genomics, Dovetail Genomics, and Oxford Nanopore Technologies, respectively, or a combination of the three, in order to evaluate the capability of each technology. [ABSTRACT FROM AUTHOR]

Background Whilst much sequencing effort has focused on key mammalian model organisms such as mouse and human, little is known about the relationship between genome sequencing techniques for non-model mammals and genome assembly quality. This is especially relevant to non-model mammals, where the samples to be sequenced are often degraded and of low quality. A key aspect when planning a genome project is the choice of sequencing data to generate. This decision is driven by several factors, including the biological questions being asked, the quality of DNA available, and the availability of funds. Cutting-edge sequencing technologies now make it possible to achieve highly contiguous, chromosome-level genome assemblies, but rely on high-quality high molecular weight DNA. However, funding is often insufficient for many independent research groups to use these techniques. Here we use a range of different genomic technologies generated from a roadkill European polecat (Mustela putorius) to assess various assembly techniques on this low-quality sample. We evaluated different approaches for de novo assemblies and discuss their value in relation to biological analyses. Results Generally, assemblies containing more data types achieved better scores in our ranking system. However, when accounting for misassemblies, this was not always the case for Bionano and low-coverage 10x Genomics (for scaffolding only). We also find that the extra cost associated with combining multiple data types is not necessarily associated with better genome assemblies. Conclusions The high degree of variability between each de novo assembly method (assessed from the 7 key metrics) highlights the importance of carefully devising the sequencing strategy to be able to carry out the desired analysis. Adding more data to genome assemblies does not always result in better assemblies, so it is important to understand the nuances of genomic data integration explained here, in order to obtain cost-effective value for money when sequencing genomes. [ABSTRACT FROM AUTHOR]

Motivation: Long read sequencing and Bionano Genomics optical maps are two techniques that, when used together, make it possible to reconstruct entire chromosome or chromosome arms structure. However, the existing tools are often too conservative and organization of contigs into scaffolds is not always optimal., Results: We developed BiSCoT (Bionano SCaffolding COrrection Tool), a tool that post-processes files generated during a Bionano scaffolding in order to produce an assembly of greater contiguity and quality. BiSCoT was tested on a human genome and four publicly available plant genomes sequenced with Nanopore long reads and improved significantly the contiguity and quality of the assemblies. BiSCoT generates a fasta file of the assembly as well as an AGP file which describes the new organization of the input assembly., Availability: BiSCoT and improved assemblies are freely available on GitHub at http://www.genoscope.cns.fr/biscot and Pypi at https://pypi.org/project/biscot/., Competing Interests: The authors declare there are no competing interests., (©2020 Istace et al.)

While chimeric RNAs may be generated by transcription-mediated mechanisms such as "trans-splicing" and "read-through/splicing" (Zhang et al., Cancer Discov 2:598-607, 2012; Zaphiropoulos, Front Genet 2:92, 2011; Li et al., Cell Cycle 8:218-222, 2009; Jividen and Li, Genes Chromosomes Cancer 53:963-971, 2014; Jia et al., Trends Cancer 2:475-484, 2016), most highly expressed chimeric RNA species identified so far are usually transcribed directly from fusion genes. Fusion genes, formed by joining two parental genes as a result of chromosomal rearrangements, are hallmarks of many types of cancer. Various methods can be deployed for confirming a particular fusion gene as the original source of transcribed chimeric RNA. In this chapter, we discuss commonly used methodologies such as genomic DNA breakpoint mapping and fluorescent in situ hybridization useful for confirming gene fusion events. In addition, we highlight the development of new technologies such as de novo whole-genome optical mapping suitable for global analysis of genomic arrangements. The advantages and disadvantages of each of these technologies are presented and compared.

Background The barn swallow (Hirundo rustica) is a migratory bird that has been the focus of a large number of ecological, behavioral, and genetic studies. To facilitate further population genetics and genomic studies, we present a reference genome assembly for the European subspecies (H. r. rustica). Findings As part of the Genome10K effort on generating high-quality vertebrate genomes (Vertebrate Genomes Project), we have assembled a highly contiguous genome assembly using single molecule real-time (SMRT) DNA sequencing and several Bionano optical map technologies. We compared and integrated optical maps derived from both the Nick, Label, Repair, and Stain technology and from the Direct Label and Stain (DLS) technology. As proposed by Bionano, DLS more than doubled the scaffold N50 with respect to the nickase. The dual enzyme hybrid scaffold led to a further marginal increase in scaffold N50 and an overall increase of confidence in the scaffolds. After removal of haplotigs, the final assembly is approximately 1.21 Gbp in size, with a scaffold N50 value of more than 25.95 Mbp. Conclusions This high-quality genome assembly represents a valuable resource for future studies of population genetics and genomics in the barn swallow and for studies concerning the evolution of avian genomes. It also represents one of the very first genomes assembled by combining SMRT long-read sequencing with the new Bionano DLS technology for scaffolding. The quality of this assembly demonstrates the potential of this methodology to substantially increase the contiguity of genome assemblies. [ABSTRACT FROM AUTHOR]