Search

Field research techniques are constantly evolving to meet the needs of the scientific community. There is a growing need for field biology studies to shift towards increasing efficiency and quality of results while simultaneously decreasing cost in both the researcher's time and resources. I tested the efficacy of using multiple recorded birdcall lures (n = 172 species) to improve mist-net captures at a subtropical African savanna setting. Capture success was compared between passive and birdcall enhanced mist-nets during winter and summer seasons. Results suggest that the use of birdcalls does significantly increase the total number of birds caught in both seasons and also increases the diversity of passerine species. Conventional passive mist-nets without an audio lure were initially productive but their capture rate subsequently decreased as sampling days progressed. Birdcall lure enhanced mist-nets had a constant capture output during the summer season. The most responsive birds to audio lures were gregarious species (e.g. Pycnonotus barbatus, Dryoscopus cubla, Prionops plumatus, Phoeniculus purpureus, Turdoides jardineii and Lamprotornis chalybaeus) and the aggressive Dicrurus adsimilis and Acridotheres tristis. I conclude that birdcall lures can be used in summer and winter seasons to improve mist-net captures especially for studies focusing on gregarious and aggressive passerine species in a sub-tropical African savanna setting., Competing Interests: The author has declared that no competing interests exist.

The emerging field of organic bioelectronics bridges the electronic world of organic-semiconductor-based devices with the soft, predominantly ionic world of biology. This crosstalk can occur in both directions. For example, a biochemical reaction may change the doping state of an organic material, generating an electronic readout. Conversely, an electronic signal from a device may stimulate a biological event. Cutting-edge research in this field results in the development of a broad variety of meaningful applications, from biosensors and drug delivery systems to health monitoring devices and brain-machine interfaces. Conjugated polymers share similarities in chemical "nature" with biological molecules and can be engineered on various forms, including hydrogels that have Young's moduli similar to those of soft tissues and are ionically conducting. The structure of organic materials can be tuned through synthetic chemistry, and their biological properties can be controlled using a variety of functionalization strategies. Finally, organic electronic materials can be integrated with a variety of mechanical supports, giving rise to devices with form factors that enable integration with biological systems. While these developments are innovative and promising, it is important to note that the field is still in its infancy, with many unknowns and immense scope for exploration and highly collaborative research. The first part of this Account details the unique properties that render conjugated polymers excellent biointerfacing materials. We then offer an overview of the most common conjugated polymers that have been used as active layers in various organic bioelectronics devices, highlighting the importance of developing new materials. These materials are the most popular ethylenedioxythiophene derivatives as well as conjugated polyelectrolytes and ion-free organic semiconductors functionalized for the biological interface. We then discuss several applications and operation principles of state-of-the-art bioelectronics devices. These devices include electrodes applied to sense/trigger electrophysiological activity of cells as well as electrolyte-gated field-effect and electrochemical transistors used for sensing of biochemical markers. Another prime application example of conjugated polymers is cell actuators. External modulation of the redox state of the underlying conjugated polymer films controls the adhesion behavior and viability of cells. These smart surfaces can be also designed in the form of three-dimensional architectures because of the processability of conjugated polymers. As such, cell-loaded scaffolds based on electroactive polymers enable integrated sensing or stimulation within the engineered tissue itself. A last application example is organic neuromorphic devices, an alternative computing architecture that takes inspiration from biology and, in particular, from the way the brain works. Leveraging ion redistribution inside a conjugated polymer upon application of an electrical field and its coupling with electronic charges, conjugated polymers can be engineered to act as artificial neurons or synapses with complex, history-dependent behavior. We conclude this Account by highlighting main factors that need to be considered for the design of a conjugated polymer for applications in bioelectronics-although there can be various figures of merit given the broad range of applications, as emphasized in this Account.

For centuries, designers and engineers have looked to biology for inspiration. Biologically inspired robots are just one example of the application of knowledge of the natural world to engineering problems. However, recent work by biologists and interdisciplinary teams have flipped this approach, using robots and physical models to set the course for experiments on biological systems and to generate new hypotheses for biological research. We call this approach robotics-inspired biology; it involves performing experiments on robotic systems aimed at the discovery of new biological phenomena or generation of new hypotheses about how organisms function that can then be tested on living organisms. This new and exciting direction has emerged from the extensive use of physical models by biologists and is already making significant advances in the areas of biomechanics, locomotion, neuromechanics and sensorimotor control. Here, we provide an introduction and overview of robotics-inspired biology, describe two case studies and suggest several directions for the future of this exciting new research area., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2018. Published by The Company of Biologists Ltd.)

We introduce a robot developed to perform feedback-based experiments, such as droplet experiments, a common type of experiments in artificial chemical life research. These experiments are particularly well suited for automation because they often stretch over long periods of time, possibly hours, and often require that the human takes action in response to observed events such as changes in droplet size, count, shape, or clustering or declustering of multiple droplets. Our robot is designed to monitor long-term experiments and, based on the feedback from the experiment, interact with it. The combination of precise automation, accurately collected experiment data, and integrated analysis and modeling software makes real-time interaction with the experiment feasible, as opposed to traditional offline processing of experiments. Last but not least, we believe the low cost of our platform can promote artificial life research. Furthermore, prevalently, findings from an experiment will inspire redesign for novel experiments. In addition, the robot's open-source software enables easy modification of experiments. We will cover two case studies for application of our robot in feedback-based experiments and demonstrate how our robot can not only automate these experiments, collect data, and interact with the experiments intelligently but also enable chemists to perform formerly infeasible experiments.

Evolutionary biologists from Darwin forward have dreamed of having data that would elucidate our understanding of evolutionary history and the diversity of life. Sequence capture is a relatively old DNA technology, but its use is growing rapidly due to advances in (i) massively parallel DNA sequencing approaches and instruments, (ii) massively parallel bait construction, (iii) methods to identify target regions and (iv) sample preparation. We give a little historical context to these developments, summarize some of the important advances reported in this special issue and point to further advances that can be made to help fulfill Darwin's dream., (© 2016 John Wiley & Sons Ltd.)

Light Sheet Microscopy in the Museum: Light sheet microscopy (or selective plane illumination microscopy) is an important imaging technique in the life sciences. At the same time, this technique is also ideally suited for community outreach projects, because it produces visually appealing, highly dynamic images of living organisms and its working principle can be understood with basic optics knowledge. Still, the underlying concepts are widely unknown to the non-scientific public. On the occasion of the UNESCO International Year of Light, a technical museum in Dresden, Germany, launched a special, interactive exhibition. We built a fully functional, educational selective plane illumination microscope (eduSPIM) to demonstrate how developments in microscopy promote discoveries in biology., Design Principles of an Educational Light Sheet Microscope: To maximize educational impact, we radically reduced a standard light sheet microscope to its essential components without compromising functionality and incorporated stringent safety concepts beyond those needed in the lab. Our eduSPIM system features one illumination and one detection path and a sealed sample chamber. We image fixed zebrafish embryos with fluorescent vasculature, because the structure is meaningful to laymen and visualises the optical principles of light sheet microscopy. Via a simplified interface, visitors acquire fluorescence and transmission data simultaneously., The Eduspim Design Is Tailored Easily to Fit Numerous Applications: The universal concepts presented here may also apply to other scientific approaches that are communicated to laymen in interactive settings. The specific eduSPIM design is adapted easily for various outreach and teaching activities. eduSPIM may even prove useful for labs needing a simple SPIM. A detailed parts list and schematics to rebuild eduSPIM are provided., Competing Interests: eduSPIM’s hardware was sponsored by the companies Thorlabs, PI, Toptica, Zeiss and AHF. This does not alter the authors’ adherence to PLOS ONE policies on sharing data and materials.

Continuous multiphase flow strategies are commonly employed for high-throughput parameter screening of physical, chemical, and biological processes as well as continuous preparation of a wide range of fine chemicals and micro/nano particles with processing times up to 10 min. The inter-dependency of mixing and residence times, and their direct correlation with reactor length have limited the adaptation of multiphase flow strategies for studies of processes with relatively long processing times (0.5-24 h). In this frontier article, we describe an oscillatory multiphase flow strategy to decouple mixing and residence times and enable investigation of longer timescale experiments than typically feasible with conventional continuous multiphase flow approaches. We review current oscillatory multiphase flow technologies, provide an overview of the advancements of this relatively new strategy in chemistry and biology, and close with a perspective on future opportunities.

Main Conclusion: Leaf initiation rate is largely determined by the apical bud temperature even when apical bud temperature largely deviates from the temperature of other plant organs. We have long known that the rate of leaf initiation (LIR) is highly sensitive to temperature, but previous studies in dicots have not rigorously demonstrated that apical bud temperature controls LIR independent of other plant organs temperature. Many models assume that apical bud and leaf temperature are the same. In some environments, the temperature of the apical bud, where leaf initiation occurs, may differ by several degrees Celsius from the temperature of other plant organs. In a 28-days study, we maintained temperature differences between the apical bud and the rest of the individual Cucumis sativus plants from -7 to +8 °C by enclosing the apical buds in transparent, temperature-controlled, flow-through, spheres. Our results demonstrate that LIR was completely determined by apical bud temperature independent of other plant organs temperature. These results emphasize the need to measure or model apical bud temperatures in dicots to improve the prediction of crop development rates in simulation models.

The remarkable advances in structural biology in the past three decades have led to the determination of increasingly complex structures that lie at the heart of many important biological processes. Many of these advances have been made possible by the use of X-ray crystallography using synchrotron radiation. In this short article, some of the challenges and prospects that lie ahead will be summarized., (© 2015 The Author(s) Published by the Royal Society. All rights reserved.)

The European X-ray free-electron laser (XFEL) facility, under construction in the Hamburg region, will provide high-peak brilliance (greater than 10(33) photons s(-1) mm(-2) mrad(-2) per 0.1% BW), ultrashort pulses (approx. 10 fs) of X-rays, with a high repetition rate (up to 27 000 pulses s(-1)) from 2016 onwards. The main features of this exceptional X-ray source, and the instrumentation developments necessary to exploit them fully, for application to a variety of scientific disciplines, are briefly summarized. In the case of structural biology, that has a central role in the scientific case of this new facility, the instruments and ancillary laboratories that are being planned and built within the baseline programme of the European XFEL and by consortia of users are also discussed. It is expected that the unique features of the source and the advanced features of the instrumentation will allow operation modes with more efficient use of sample materials, faster acquisition times, and conditions better approaching feasibility of single molecule imaging., (© 2014 The Author(s) Published by the Royal Society. All rights reserved.)

Long-term holding and precise handling of growing plant tissues during in vitro cultivation has been a major hurdle for experimental studies related to plant development and reproduction. In the present review, we introduce two of our newly developed poly(dimethylsiloxane)-based microdevices: a T-shaped microchannel device for pollen tube chemoattraction and a microcage array for long-term live imaging of ovules. Their design, usage and advantages are described, and future prospects of experimental approaches to plant reproduction using such microdevices are discussed.

Next-generation X-ray sources, based on the X-ray Free Electron Laser (XFEL) concept, will provide highly coherent, ultrashort pulses of soft and hard X-rays with peak intensity many orders of magnitude higher than that of a synchrotron. These pulses will allow studies of femtosecond dynamics at nanometer resolution and with chemical selectivity. They will produce diffraction images of organic and inorganic nanostructures without deleterious effects of radiation damage.

Surface plasmon resonance sensors have made vast advancements in the sensing technology and the number of applications achievable. New developments in surface plasmon resonance sensors have gained considerable momentum promoted by the urgent needs of fast, reliable and label-free methods for detection and quantification of analytes in molecular biology, medicine and other life sciences. However, even if enormous improvements in the limits of detections have been achieved, this technology still faces important challenges to be translated to clinical practice or in-field measurements. This paper reviews the important recent advances of this technology for the label-free detection in real biological samples and we discussed the key challenges to be overcome to transit from prototypes to commercial biosensors.

Background: Teaching bioinformatics at universities is complicated by typical computer classroom settings. As well as running software locally and online, students should gain experience of systems administration. For a future career in biology or bioinformatics, the installation of software is a useful skill. We propose that this may be taught by running the course on GNU/Linux running on inexpensive Raspberry Pi computer hardware, for which students may be granted full administrator access., Results: We release 4273π, an operating system image for Raspberry Pi based on Raspbian Linux. This includes minor customisations for classroom use and includes our Open Access bioinformatics course, 4273π Bioinformatics for Biologists. This is based on the final-year undergraduate module BL4273, run on Raspberry Pi computers at the University of St Andrews, Semester 1, academic year 2012-2013., Conclusions: 4273π is a means to teach bioinformatics, including systems administration tasks, to undergraduates at low cost.

In this paper, a robotic fish with a caudal fin with vertical phase differences is studied, especially focusing on the energy consumption. Energies for thrusting a conventional robotic fish and one with caudal fin with vertical phase differences are obtained and compared each other. It is shown that a robotic fish with a caudal fin with vertical phase differences can save more energy, which implies the efficient thrusting via a vertically waving caudal fin.

X-ray free electron lasers (XFELs) are potentially revolutionary X-ray sources because of their very short pulse duration, extreme peak brilliance and high spatial coherence, features that distinguish them from today's synchrotron sources. We review recent time-resolved Laue diffraction and time-resolved wide angle X-ray scattering (WAXS) studies at synchrotron sources, and initial static studies at XFELs. XFELs have the potential to transform the field of time-resolved structural biology, yet many challenges arise in devising and adapting hardware, experimental design and data analysis strategies to exploit their unusual properties. Despite these challenges, we are confident that XFEL sources are poised to shed new light on ultrafast protein reaction dynamics., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

X-ray free-electron lasers (X-FELs) produce X-ray pulses with extremely brilliant peak intensity and ultrashort pulse duration. It has been proposed that radiation damage can be 'outrun' by using an ultra intense and short X-FEL pulse that passes a biological sample before the onset of significant radiation damage. The concept of 'diffraction-before-destruction' has been demonstrated recently at the Linac Coherent Light Source, the first operational hard X-ray FEL, for protein nanocrystals and giant virus particles. The continuous diffraction patterns from single particles allow solving the classical 'phase problem' by the oversampling method with iterative algorithms. If enough data are collected from many identical copies of a (biological) particle, its three-dimensional structure can be reconstructed. We review the current status and future prospects of serial femtosecond crystallography (SFX) and single-particle coherent diffraction imaging (CDI) with X-FELs., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Research opportunities and techniques are reviewed for the application of hard x-ray pulsed free-electron lasers (XFEL) to structural biology. These include the imaging of protein nanocrystals, single particles such as viruses, pump--probe experiments for time-resolved nanocrystallography, and snapshot wide-angle x-ray scattering (WAXS) from molecules in solution. The use of femtosecond exposure times, rather than freezing of samples, as a means of minimizing radiation damage is shown to open up new opportunities for the molecular imaging of biochemical reactions at room temperature in solution. This is possible using a 'diffract-and-destroy' mode in which the incident pulse terminates before radiation damage begins. Methods for delivering hundreds of hydrated bioparticles per second (in random orientations) to a pulsed x-ray beam are described. New data analysis approaches are outlined for the correlated fluctuations in fast WAXS, for protein nanocrystals just a few molecules on a side, and for the continuous x-ray scattering from a single virus. Methods for determining the orientation of a molecule from its diffraction pattern are reviewed. Methods for the preparation of protein nanocrystals are also reviewed. New opportunities for solving the phase problem for XFEL data are outlined. A summary of the latest results is given, which now extend to atomic resolution for nanocrystals. Possibilities for time-resolved chemistry using fast WAXS (solution scattering) from mixtures is reviewed, toward the general goal of making molecular movies of biochemical processes.

X-ray phase contrast imaging has overcome the limitations of X-ray absorption imaging in many fields. Particular effort has been directed towards developing phase retrieval methods: These reveal quantitative information about a sample, which is a requirement for performing X-ray phase tomography, allows material identification and better distinction between tissue types, etc. Phase retrieval seems impossible with conventional X-ray sources due to their low spatial coherence. In the only previous example where conventional sources have been used, collimators were employed to produce spatially coherent secondary sources. We present a truly incoherent phase retrieval method, which removes the spatial coherence constraints and employs a conventional source without aperturing, collimation, or filtering. This is possible because our technique, based on the pixel edge illumination principle, is neither interferometric nor crystal based. Beams created by an X-ray mask to image the sample are smeared due to the incoherence of the source, yet we show that their displacements can still be measured accurately, obtaining strong phase contrast. Quantitative information is extracted from only two images rather than a sequence as required by several coherent methods. Our technique makes quantitative phase imaging and phase tomography possible in applications where exposure time and radiation dose are critical. The technique employs masks which are currently commercially available with linear dimensions in the tens of centimeters thus allowing for a large field of view. The technique works at high photon energy and thus promises to deliver much safer quantitative phase imaging and phase tomography in the future.

Imaging samples in liquids with electron microscopy can provide unique insights into biological systems, such as cells containing labelled proteins, and into processes of importance in materials science, such as nanoparticle synthesis and electrochemical deposition. Here we review recent progress in the use of electron microscopy in liquids and its applications. We examine the experimental challenges involved and the resolution that can be achieved with different forms of the technique. We conclude by assessing the potential role that electron microscopy of liquid samples can play in areas such as energy storage and bioimaging.

This paper presents the basis of DNA genealogy, a new field of science, which is currently emerging as an unusual blend of biochemistry, history, linguistics, and chemical kinetics. The methodology of the new approach is comprised of chemical (biological) kinetics applied to a pattern of mutations in non-recombinant fragments of DNA (Y chromosome and mtDNA, the latter not being considered in this overview). The goal of the analysis is to translate DNA mutation patterns into time spans to the most recent common ancestors of a given population or tribe and to the dating of ancient migration routes. To illustrate this approach, time spans to the common ancestors are calculated for ethnic Russians, that is Eastern Slavs (R1a1 tribe), Western Slavs (I1 and I2 tribes), and Northern (or Uralic) Slavs (N1c tribe), which were found to live around 4600 years before present (R1a1), 3650 ybp (I1), 3000 and 10,500 ybp (I2, two principal DNA lineages), and 3525 ybp (N1c) (confidence intervals are given in the main text). The data were compared with the respective dates for the nearest common ancestor of the R1a1 "Indo-European" population in India, who lived 4050 years before present, whose descendants represent the majority of the upper castes in India today (up to 72%). Furthermore, it was found that the haplotypes of ethnic Russians of the R1a1 haplogroup (up to 62% of the population in the Russian Federation) and those of the R1a1 Indians (more than 100 million today) are practically identical to each other, up to 67-marker haplotypes. This essentially solves a 200-year-old mystery of who were the Aryans who arrived in India around 3500 years before the present. Haplotypes and time spans to the ancient common ancestors were also compared for the ethnic Russians of haplogroups I1 and I2, on one hand, and the respective I1 and I2 populations in Eastern and Western Europe and Scandinavia, on the other. It is suggested that the approach described in this overview lays the foundation for "molecular history", in which the principal tool is high-technology analysis of DNA molecules of both our contemporaries and excavated ancient DNA samples, along with their biological kinetics.

This review describes the method of fluorescence correlation spectroscopy (FCS) and its applications. FCS is used for investigating processes associated with changes in the mobility of molecules and complexes and allows researchers to study aggregation of particles, binding of fluorescent molecules with supramolecular complexes, lipid vesicles, etc. The size of objects under study varies from a few angstroms for dye molecules to hundreds of nanometers for nanoparticles. The described applications of FCS comprise various fields from simple chemical systems of solution/micelle to sophisticated regulations on the level of living cells. Both the methodical bases and the theoretical principles of FCS are simple and available. The present review is concentrated preferentially on FCS applications for studies on artificial and natural membranes. At present, in contrast to the related approach of dynamic light scattering, FCS is poorly known in Russia, although it is widely employed in laboratories of other countries. The goal of this review is to promote the development of FCS in Russia so that this technique could occupy the position it deserves in modern Russian science.

Every cell in a living organisms performs a complex array of functions using a vast arsenal of proteins, ion channels, pumps, motors, signaling molecules, and cargo carriers. With all the progress that humankind has made to date in the development of sophisticated machinery and computing capabilities, understanding and communicating with living systems on that level of complexity lags behind. A breakthrough in these capabilities could only come if a way is found to integrate biological components into artificial devices. The central obstacle for this vision of bionanoelectronics is the absence of a versatile interface that facilitates two-way communication between biological and electronic structures. 1D nanomaterials, such as nanotubes and nanowires, open up the possibility of constructing tight interfaces that could enable such bidirectional flow of information. This report discusses the overall progress in building such interfaces on the level of individual proteins and whole cells and focuses on the latest efforts to create device platforms that integrate membrane proteins, channels, and pumps with nanowire bioelectronics., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The axial resolution of conventional acoustic micro imaging is limited by the wavelength of acoustic waves. Acoustic time-frequency domain imaging was recently proposed to overcome the wavelength limit [Zhang et al., J. Acoust. Soc. Am. 118, 3706-3720 (2005)]. A continuous wavelet transform based acoustic time-frequency domain imaging technique is investigated in this paper. Experiments are performed on real 3D data collected from microelectronic packages. Results demonstrate the proposed technique reveals more image details and enhances the image contrast in comparison with conventional time domain imaging.

We summarize the advances and breakthroughs of 'biological' NMR that were presented at the Joint EUROMAR 2010 - 17th ISMAR Conference - aka 'World Wide Magnetic Resonance 2010' in Florence, Italy., (Copyright © 2010 Elsevier Inc. All rights reserved.)

Miniaturization of the classical test tube to picoliter dimensions is possible in monodisperse water-in-oil droplets that are generated in microfluidic devices. The establishment of standard unit operations for droplet handling and the ability to carry out experiments with DNA, proteins, cells and organisms provides the basis for the design of more complex workflows to address biological challenges. The emerging experimental format makes possible a quantitative readout for large numbers of experiments with a precision comparable to the macroscopic scale. Directed evolution, diagnostics and compound screening are areas in which the first steps are being taken toward the long-term goal of transforming the way we design and carry out experiments., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

In this paper, for the first time, we report on systematic theoretical and experimental investigation of Phase Contrast Optical Tweezers (PCOT) which could be an indispensable tool for micromanipulation of the transparent micro and nano objects such as biological tissues and vesicles. The quadrant photodiode detection scheme and the power-spectrum calibration method is shown to be valid for this case. We have shown that the phase objective with new designed phase plates can provide nearly aberration-free condition at a desired depth. This could be a valuable advantage for simultaneous in-depth micro-manipulations and visualization of the sample.

The effects of femtosecond laser ablation on the physical and chemical properties at the surface of poly methylmethacrylate (PMMA) were studied. Femtosecond laser microfabrication caused the initially wetting behavior of PMMA to become nonwetting, mainly because of the laser-induced surface porosity at the submicroscale. Static and dynamic contact angle measurements along with morphological characterization revealed that after the laser irradiation, the system lies in an intermediate regime between those theorized by Wenzel and Cassie-Baxter. Spectroscopic analysis did not evidence any significant variation in the chemical properties of the processed polymeric surfaces.

A challenge for nonlinear imaging in living tissue is to maximize the total fluorescent yield from each fluorophore. We investigated the emission rates of three fluorophores-rhodamine B, a red fluorescent protein, and CdSe quantum dots-while manipulating the phase of the laser excitation pulse at the focus. In all cases a transform-limited pulse maximized the total yield to insure the highest signal-to-noise ratio. Further, we find evidence of fluorescence antibleaching in quantum dot samples.

CE has evolved as one of the most efficient separation techniques for a wide range of analytes, from small molecules to large proteins. Modern microdevices facilitate integration of multiple sample-handling steps, from preparation to separation and detection, and often rely on CE for separations. However, CE frequently requires complex geometries for performing sample injections and maintaining zone profiles across long separation lengths in microdevices. Two novel methods for performing electrophoretic separations, gradient elution moving boundary electrophoresis (GEMBE) and gradient elution isotachophoresis (GEITP), have been developed to simplify microcolumn operations. Both techniques use variable hydrodynamic counterflow and continuous sample injection to perform analyses in short, simple microcolumns. These properties result in instruments and microdevices that have minimal 'real-world' interfaces and reduced footprints. Additionally, GEITP is a rapid enrichment technique that addresses sensitivity issues in CE and microchips.

It is getting increasingly evident that physical properties such as elastoviscoplastic properties of living materials are quite important for the process of tissue development, including regulation of genetic pathways. Measuring such properties in vivo is a complicated and challenging task. In this paper, we present an instrument, a scanning air puff tonometer, which is able to map point by point the viscoelastic properties of flat or gently curved soft materials. This instrument is an improved version of the air puff tonometer used by optometrists, with important modifications. The instrument allows one to obtain a direct insight into gradients of material properties in vivo. The instrument capabilities are demonstrated on substances with known elastoviscoplastic properties and several biological objects. On the basis of the results obtained, the role of the gradients of elastoviscoplastic properties is outlined for the process of angiogenesis, limb development, bacterial colonies expansion, etc. which is important for bridging the gaps in the theory of the tissue development and highlighting new possibilities for tissue engineering, based on a clarification of the role of physical features in developing biological material.

Uniform, large surface area substrates for surface-enhanced Raman spectroscopy (SERS) are fabricated by oblique angle deposition. The SERS-active substrates are patterned by a polymer-molding technique to provide a uniform array for high throughput biosensing and multiplexing. Using a conventional SERS-active molecule, 1,2-di(4-pyridyl)ethylene (BPE) >or=98%, we show that this device provides a uniform Raman signal enhancement from well to well with a detection limit of at least 10(-8)M of the BPE solution or 10(-18)mol of BPE. The SERS intensity is also demonstrated to vary logarithmically with the log of BPE concentration and the apparent sensitivity of the patterned substrate is compared to previous reports from our group on non-patterned substrates. Avian influenza is analyzed to demonstrate the utility of SERS multiwell patterned substrates for biosensing. The spectra acquired from patterned substrates show better reproducibility and less variation compared to the unpatterned substrates according to multivariate analysis. Our results highlight potential advantages of the patterned substrate.

Microdosimetry study has been carried out at the education and research mini-reactor of Kinki University (UTR-KINKI) using a tissue equivalent gas proportional counter (TEPC). The microdosimetric single event spectra for 0.5, 1, 2, 3 and 5 microm site sizes were obtained in the lineal energy range from 1 to 1000 keV/microm. Neutron and gamma-ray fractional doses were estimated from the single event spectra. The neutron dose fraction was varied from 35 to 55% for 0.5 to 5 microm site size. The averaged lineal energy, y(D), for each site size was likewise estimated and found to be dependent on the site size. The averaged lineal energy for neutron was slightly larger than that of the fission neutrons from (252)Cf, and the averaged lineal energy for gamma-ray had similar site-size-dependence of 25 keV gamma-rays and 250 kV X-rays. Relative biological effectiveness was found to be 4.1 +/- 0.13 for UTR-KINKI using Tilikidis's 2 Gy-response function. The estimated RBE for UTR-KINKI neutrons is quite close to the previous biological experimental value of 4.3 +/- 0.6 for micronucleated cells in gill cell of Medaka and 4.6 +/- 0.5 for induction of lymphocyte apoptosis in the thymus of ICR mice.

This paper provides a novel technique to detect transparent biological living cells trapped in a microfluidic MEMS device by optical diffraction. The device essentially consists of an optical aperture or an aperture array patterned in metal layer and a microfluidic chamber positioned above the center of the aperture. When the cells in the chamber are illuminated through the aperture, the far-field diffraction pattern can be recorded by a CCD camera or a photodetector array. This diffraction pattern uniquely corresponds to the sizes, positions, and intrinsic optical properties of the aperture, cells, and the microfluidic chamber materials, so any unknown but relevant parameter is able to be extrapolated when all other parameters are fixed or identified. This paper describes in detail the designs of various microfluidic chambers and apertures for this application, and the development of a complete set of software for the analysis of the cells' optical properties. Compared with other currently available methods for the detection of transparent living cells, this method has the advantages of simple device structure, easy to manipulate, able to simultaneously detect several cells of different species, as well as providing accurate and sensitive results. Besides the detection of living cells, this technique can also be used to detect or characterize other transparent or low optical absorption particles, such as polymer spheres or insoluble droplets, inside an aqueous solution.