Search

The objective of this study is to evaluate the feasibility of an aqueous process for the biorefinery of sunflower whole plant using a co-rotating twin-screw extruder. Traditionally, aqueous extraction of oil is looked upon as an environmentally cleaner alternative technology to the solvent extraction (Rosenthal et al., 1996) and the twin-screw extruder carries out three essential unit operations continuously: conditioning and grinding of whole plant, liquid/solid extraction and liquid/solid separation. Wringing out the mixing is favoured thanks to the stalk fibers. However, drying of the cake meal is not optimal and lixiviation of cotyledon cells within the seed is incomplete. Extraction efficiency depends on the operating conditions: screw rotation speed, input flow rates of whole plant and water. In best conditions, oil yield is 57% and residual oil content in the cake meal is 14%. These conditions lead to the co-extraction of proteins, pectins and hemicelluloses. Protein yield is 44% and residual protein content in the cake meal is 7%. Oil is extracted in the form of two oil-in-water emulsions stabilized by phospholipids and proteins at interface. An aqueous extract containing part of the water-soluble constituents from whole plant, mainly proteins and pectins, is also generated. As a mixture of fibers and proteins, the cake meal can be moulded by thermo-pressing. Panels have promising mechanical properties in bending.

Biorefinery of sunflower whole plant is conducted according to an aqueous process using a twin-screw extruder. Aqueous extraction of oil is looked upon as an environmentally cleaner alternative technology to solvent extraction. Twin-screw extruder carries out three unit operations continuously: conditioning and grinding of whole plant, liquid/solid extraction and liquid/solid separation. Extraction efficiency depends on screw speed, and input flow rates of whole plant and water. In best conditions, oil yield is 57%, and residual oil content in cake meal is 14%. These conditions lead to the co-extraction of proteins, pectins and hemicelluloses. Oil is extracted in the form of two oil-in-water emulsions stabilized by phospholipids and proteins at interface. They could be used as co-emulsifiers for creams production in cosmetic industry. An aqueous extract containing part of the water-soluble constituents from whole plant, mainly proteins and pectins, is also generated. It can be recycled to the process. As a mixture of fibers and proteins, the cake meal can be moulded by thermo-pressing. Denser fiberboards have promising mechanical properties in bending. They could be used in furniture industry. Fiberboards with the lowest densities are more fragile but they could be used for their heat insulation properties in building industry.

International audience; The starting material used in this study was a cake generated during thermo-mechanical fractionation of sunflower (Helianthus annuus L.) whole plant in a Clextral BC 45 (France) twin-screw extruder. It was slightly deoiled (17.6% dry matter for residual oil content), leading to an oil extraction yield of 46.1% (yield based on the residual oil content in cake). As it was a mixture of fibers and proteins, it could be considered as a natural composite that was processed successfully into fiberboards by thermo-pressing. This study aimed to evaluate the influence of thermo-pressing conditions on oil expression yield during molding and on flexural properties of fiberboards manufactured from this cake. An experimental design with three variables was realized: from 250 to 500 kgf/cm² for pressure applied (in 5 levels), from 60 to 300 s for molding time (in 7 levels), and from 600 to 1200 mg/cm² for cake quantity (in 3 levels). Temperature of the aluminium mold positioned between the two plates of the heated hydraulic press (PEI, France) with 400 tons capacity was 200°C. All fiberboards were cohesive. As an internal binder, proteins ensured the agromaterial cohesion, and fibers entanglement also acted like reinforcement. Thermo-pressing was not only a molding operation. It also consisted in increasing the oil extraction efficiency. Oil expression yield during molding increased with the increase of pressure applied, and especially with the increase of molding time. At the same time, it was not so much influenced by the modification of cake quantity. Highest oil expression yield was 58.8% in proportion to the oil that the cake contained, leading to a total oil yield (oil extracted by water in twin-screw extruder, and oil expressed during molding) of 77.8% in proportion to the oil that the sunflower whole plant contained. It was associated with the next thermo-pressing conditions: 469 kgf/cm² for pressure applied, 300 s for molding time, and 697 mg/cm² for cake quantity. Flexural properties of the corresponding fiberboard were 8.1 MPa for flexural strength at break, and 1778 MPa for elastic modulus. Its thickness was 5.40 mm, leading to a mean apparent density of 1.25. Such flexural strength at break was a bit lower (-25%) than the one of the most resistant fiberboard (10.8 MPa), manufactured from the next thermo-pressing conditions: 250 kgf/cm² for pressure applied, 300 s for molding time, and 807 mg/cm² for cake quantity. For such conditions, oil expression yield was 48.0% in proportion to the oil that the cake contained, leading to a total oil yield close (-8%) to the highest yield obtained (71.9% in proportion to the oil that the sunflower whole plant contained instead of 77.8%). Thermo-pressing of cake from sunflower whole plant led to two actions in a single step: the expression of part of residual oil in cake that contributed to the improvement of the oil extraction efficiency, and the molding of biodegradable fiberboards. Their flexural properties were promising. Moreover, because residual oil content in fiberboards was at least 8.0% dry matter, they were not too water-sensitive (i.e. more durable than other thermo-pressed agromaterials). Such fiberboards were value-added agromaterials that may have direct industrial applications. Indeed, they would be potentially usable as inter-layer sheets for pallets, for the manufacturing of biodegradable containers (composters, crates for vegetable gardening), or for their heat insulation properties in building trade.

International audience; Twin-screw extrusion is an original solution for the biorefinery of sunflower whole plant according to an aqueous extraction process. In best operating conditions, oil yield is 57% and residual oil content in the cake meal is 14%. Oil is extracted in the form of two oil-in-water emulsions stabilized by phospholipids and proteins at interface. The cake meal would be suitable for use in animal feeds and for energy production in pellets burning furnaces. As a mixture of fibers and proteins, it is also considered as a natural composite. It can be processed into biodegradable agromaterials by thermo-pressing. During molding, part of residual oil is expressed (until 41% of oil from whole plant), leading to the increase of the total oil extraction yield (aqueous extraction in twin-screw extruder and expression during thermo-pressing): until 81% of oil from whole plant. Panels have promising mechanical properties in bending (until 12 MPa for stress at break). They are usable as inter-layer sheets for pallets, for their sound and heat insulation properties or for the manufacturing of containers by assembly of panels. Their hydrophobic character (8% for residual oil content in the panels) makes them resistant to water.

Twin-screw extrusion is an original solution for the biorefinery of sunflower whole plant according to an aqueous extraction process. In best operating conditions, oil yield is 57% and residual oil content in the cake meal is 14%. Oil is extracted in the form of two oil-in-water emulsions stabilized by phospholipids and proteins at interface. The cake meal would be suitable for use in animal feeds and for energy production in pellets burning furnaces. As a mixture of fibers and proteins, it is also considered as a natural composite. It can be processed into biodegradable agromaterials by thermo-pressing. During molding, part of residual oil is expressed (until 41% of oil from whole plant), leading to the increase of the total oil extraction yield (aqueous extraction in twin-screw extruder and expression during thermo-pressing): until 81% of oil from whole plant. Panels have promising mechanical properties in bending (until 12 MPa for stress at break). They are usable as inter-layer sheets for pallets, for their sound and heat insulation properties or for the manufacturing of containers by assembly of panels. Their hydrophobic character (8% for residual oil content in the panels) makes them resistant to water.